Hardware Specifications of Base Station

Transcription

1 01 Hardware s of Base Station The following hardware specifications of Base Station are described in Hardware Description and Technical Description. Baseband (For Base Station) Number of TRXs Supported Number of Cells Supported Number of CEs Supported (Only for NodeB) Maximum number of UEs in RRC_ CONNECTED mode per enodeb Data radio bearer (DRB, only for e NodeB) Baseband (For WBBP/LBBP) RF Transmission Number of Cells Supported Number of CEs Supported of WBBP Maximum scheduled users and activa ted users of an LBBP Modes and Frequency bands RX and TX Channels Capacity Receiver Sensitivity (dbm) Transmission Port Number of ports RRC Connected Users per Cell of LBBP Cell Bandwidth, Antenna Configuration of LBBP Maximum Throughput of LBBP Output Power Power Consumption Dimension and Weight Surge protection specifications Antenna Capability Port Capacity Full/Half-Duplex Signaling * Call Attempt per Second (CAPS) Common NodeB Application Parts (CNAPS) Engineering Input Power Dimension and Weight Operating temperature Relative humidity Atmospheric pressure Surge protection specifications Standards (Protection rat ing, Storage, Transportati on, Anti-seismic perform ance, Anti-earthquake pe rformance and EMC) Note: * means these specifications will be added at SRAN8.0.

2 List of hardware specifications described in the DocumentsⅠ 02 Type Hardware s Technical Description Hardware Description Baseband (For Base Station) Number of TRXs Supported Number of Cells Supported Number of CEs Supported (Only for NodeB) Maximum number of UEs in RRC_CONNECTED mode per enodeb Data radio bearer (DRB, only for enodeb) Baseband (For WBBP/LBBP) Number of Cells Supported Number of CEs Supported of WBBP Maximum scheduled users and activated users of an LBBP RRC Connected Users per Cell of LBBP Cell Bandwidth, Antenna Configuration of LBBP Maximum Throughput of LBBP RF Modes and Frequency bands RX and TX Channels Capacity Receiver Sensitivity (dbm) Output Power and Power Consumption Antenna Capability Dimension and Weight Surge protection specifications

3 03 List of hardware specifications described in the Documents Ⅱ Type Hardware s Technical Description Hardware Description Transmission Transmission Port Number of ports Port Capacity Full/Half-Duplex Signaling Call Attempt per Second (CAPS) Common NodeB Application Parts (CNBAPS) Added in SRAN8.0 Added in SRAN8.0 Engineering Input Power Dimension and Weight Operating temperature Relative humidity Atmospheric pressure Surge protection specifications Standards (Protection rating, Storage, Transportat ion, Anti-seismic performance, Anti-earthquake p erformance and EMC)

4 Baseband (For Base Station) 04

5 Baseband (For WBBP/LBBP) 05

6 06 Product Principle, Architecture and Hardware RF I RX and TX Channels Capacity Receiver Sensitivity (dbm) Output Power Power Consumption

7 07 RF II Surge protection specifications Dimension and Weight Antenna Capability Troubleshooting Guide

8 Transmission Transmission Port in Technical Description Transmission in Hardware Description MO Reference 08

9 09 Signaling Signaling specifications will be added in Technical Description released with SRAN8.0.

10 10 Engineering Input Power and Equipment Environment s Surge Protection s and Standards

11 11 How to Obtain Hardware s Documentation How to obtain hardware specifications? Take GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 as an example: GBTS Product Documentation(V100R0R14) Support ->Wireless-> GSM-BSS- >GSM-BTS->Product Documentation NodeB Product Documentation(V100R0R14) Support ->Wireless->WCDMA-RAN- >WCDMA-NodeB-> Product Documentation enodeb Product Documentation(V100R005) Support ->Wireless-> LTE FDD- >enodeb-> Product Documentation MBTS Product Documentation(V100R007) Support ->Wireless-> SingleRAN- >MBTS- > Product Documentation