Precise Fiber Couple Laser Light Source

Size: px
Start display at page:

Download "Precise Fiber Couple Laser Light Source"

Transcription

1 Precise Fiber Couple Laser Light Source User Guide User Guide Document No. AEO-LD SAFTEY REQUIREMENT... 2 Precise Laser Light Source Page 1 / 15

2 1.1 User esponsibility Description PRODUCTIOS GENERAL DESCRIPTION Important feature System Initial Set-up.5 3. PANEL FUNCTION OVERVIEW 3.1 Front Panel Overview REAR PANEL OVERVIEW TURNING ON THE SOURCE PC CONTROL LIGHT SOURCE SYSTEM PC Control Light Source System description Manual Control Function PC control function PC Control Communication Protocol Serial Port Setting Command Structure Modulating the Laser Output Making the Safety Interlock Connections Specifications 13 CHAPTER 1: SAFTEY REQUIREMENT 2.1 User Responsibility 110 Voltage High voltage inside Precise Laser Light Source Page 2 / 15

3 To avoid electrical shock, before powering unit, make sure that the protective conductor of the 3-conductor power cord is correctly connected to the protective earth contact of the socket outlet. Improper grounding can cause electric shock resulting in severe injury or even death. Do not operate without cover installed. LASER RADIATION AVOID EXPOSURE TO THE BEAM CLASS 3B LASER PRODUCT 405, 473, 520 nm <25 mw Chapter 2: Description Precise Laser Light Source Page 3 / 15

4 2.1 Production General Description The AEO Fiber Coupled Laser Sources provide easy coupling and simple control of laser diode driven fiber optics. This 1480 nm Spectrum Stabilized Laser Module provides the user with a powerful and extremely stable laser source that is ideal for optical scientific applications. The AEO-LD1480 is a Class 3B laser product with laser emission at 1480nm and output power levels exceeding 100mW. Extreme care should be taken when operating this unit to avoid potentially hazardous exposure to both eyes and skin. Users should wear eye protection when operating this unit and should avoid exposure to the output beam. These laser sources is a temperature controlled in full output power range. It comes equipped with a thermo-electric cooler to stabilize the output wavelength stabilizes in nm in whole power from 0~100mw. 2.2 Important feature: This laser light source has a powerful control function both in manual and PC though RS232/USB communication. With this PC Communication function, user can easy integrate it into his auto- Measurement system, such as Raman spectrometer analysis instrument if users select 785nm wavelength output laser light source. 2.3 System Initial Set-up Perform the following steps for the initial set-up. Precise Laser Light Source Page 4 / 15

5 1. Determine the AC line voltage the unit will be connected to 115 VAC. 2. Locate the unit on a dry, level working surface. 3. Make sure the POWER key switch on the rear of the unit is in the OFF position. 4. Plug the female end of the AC line cord provided into the AC Input Receptacle on the rear of the unit. Plug the male end into a properly grounded AC socket. 5. Connect a Fiber Optic cable to the LASER APERTURE on the front panel of the unit. Chart 3 Panel Function Overview Precise Laser Light Source Page 5 / 15

6 3.1. Front Panel Overview LED Digital Display LED Indicator Display Status Laser output Power Adjust knob Laser Output FC/PC fiber Optic Connector Laser Emission Turn On/Off switch Display Laser Wavelength (nm) Display Select Switch Press button display power in mw/dbm 3.2. Rear Panel Overview 110V/60Hz AC Power Cord Heat Dissipation Fan USB B Type Connector Precise Laser Light Source Page 6 / 15

7 Modulation Input 0 to 5 V Max, 50 Ω RS232 Serial Port/Interlock (option) 3.3 Power on the Source SHOCK Figure 2 Rear Panel of Laser Source 110 V High voltage inside. To avoid electrical shock, before powering unit, make sure that the protective power cord is correctly connected to the protective earth contact of the socket outlet. Improper grounding can cause electric shock resulting in severe injury or even death. Do not operate without cover installed. Perform the following steps to turn on the Laser Light Source: Precise Laser Light Source Page 7 / 15

8 Turn on POWER switch. The unit is ON when the display lights up. On power on initial time, there is 500ms slowly start delay, which is specifically protect diode laser avoid suddenly power up surge current. The diode laser current linearly increases from zero to System Setting Value. If unit Interlock option selected, Make sure the Interlock Input is short-circuited. The default display mode is laser power (mw), and laser thermo-electric cooler is always activated when the unit turns on. Use the Power Adjust Knob to adjust the output power to the desired level. Press the emission button to turn ON/OFF the laser. The LASER ON when emission button to is turn On, and indicator display mw (default), The LASER OFF when emission button to is turn OFF, LED Display displays , two indicator LED will light off Press the mw/dbm button to change the display unit : mw or dbm Press the W (nm) button to display laser wavelength for example display: 1480, it means the laser wavelength is 1480 nm. Chapter 4. PC Control Light Source System Precise Laser Light Source Page 8 / 15

9 4.1 PC Control Light Source System description This light source unit has a powerful PC /manual remote function 4.2 Manual Control Function: The unit default control mode set in manual control, all function can implement on panel push button. 4.3 PC control function: The most important feature of this light source is its PC control ability. In industry intelligent equipment system, the GPIB and RS- 232 are defined as a standard communication port among multiequipment. There are two Control method option: 1. User can use AEO Lasretech Provides user GUI, which is free provided. 2. User can also use HyperTerminal ASC command to control this light Source. With this ASC code command, user can easy integrated this light source to their system, such as Raman spectrometer analysis instrument. The ASC code definition is in PC Control Communication Protocol: Serial Port Setting Serial communication with Baud rate, 8 data bits, 1 stop bit, no parity, no handshake Command Structure <Command><=><VALUE><&> <Command> are ten ASCII character. Precise Laser Light Source Page 9 / 15

10 <=> is a separator to separate variable and value. <VALUE> is several decimal numbers in ASCII. There are no space in the Data (Stream). <&> is a separator, which indicate the end of one data structure. Command Define: LdMode_Set: => laser work mode (manual or PC control) LD_Turn_ON: => laser turn on or turn off LdWk_P_Set :=> light source output set power (mw) Example: send a frame data LD_Turn_ON=1& => means laser turn; LD_Turn_ON=0& => means laser turn off; LdMode_Set=0& LdMode_Set=3& Power on default: mean: => manual control mean: => PC control manual control LdWk_P_Set=123& means :=> set light source output power = 123(mw) LdWk_P_Set=100& means :=> set light source output power = 100(mw) Precise Laser Light Source Page 10 / 15

11 Chapter 5 Modulating the Laser Output 5.1 Description The MOD IN input can be used to modulate the laser output, or set the laser output remotely using a small signal source, (maximum is +5V). 5.2 Function Procedure: Step 1. In order to make the light source work in modulation must set output power in 10mW using Laser output Power Adjust Knob, make the drive current is not zero but actually at the threshold current. Step 2. Connect a signal generator or 0 to 5 V signal source to the device( see figure 2 rear panel view) Apply the appropriate signal to the MOD IN input. Signals above approximately 5 V will be clamped by internal circuits. Adjusting the PWR ADJ knob will allow for a DC offset on the modulated output. Adjust the input signal accordingly to avoid clipping the output waveform, which will occur if the unit is driven to its current or power limits. CAUTION Modulation input signal must be less than 5V, Over high voltage may damage the integrated fiber coupled laser! Precise Laser Light Source Page 11 / 15

12 Chapter 6 Making the Safety Interlock Connections AEO Light Sources are equipped with a remote interlock connector located on the rear panel, see Figure 3. All devices have this feature. In order to enable the laser source, a short circuit must be applied across the terminals of the Remote Interlock connector. In practice this connection is made available to allow the user to connect a remote actuated switch to the connector. The switch, which must be normally open, has to be closed in order for the unit to be enabled. Once the switch is in an open state the laser source will automatically shut down. If the switch returns to a closed condition the laser source return normal work status. All units shipped from AEO Lasetech are configured with a shorting device installed in the Interlock connector. If you are not going to use this feature then you can leave the shorting device installed and the unit will operate normally as described in the procedures above. If you wish to make use of the Interlock feature you will need to Acquire the appropriate connector mate and wire it your remote interlock switch. Precise Laser Light Source Page 12 / 15

13 lock1 lock2 RS232_RX RS232_TX RS232_RX RS232_TX J D Connector 9 Figure 4 DB9 female connector pin definition Chapter 7 Specifications Minimum Typical Maximum Wavelength Spectral Line width nm 1480 nm nm 0.1 nm (0.07 nm for NL version) 0.15 nm (0.1 nm for NL version) Full Output Power Stability 0 mw 100 mw 120mW 15 min: ±0.01 dbm, 24 hr: ±0.05 dbm (After 1 hr Warm-up at 25 ± 10 C Ambient) Precise Laser Light Source Page 13 / 15

14 Display Accuracy Setpoint Resolution Adjustment Range ±5% 0.01 dbm ~0 mw to Full Power TEC Stability C/ 1 C Operating Temperature Storage Temperature AC Input Modulation Input 0 C to 45 C -10 C to 70 C 110 VAC/ 60 Hz /0.5A 0-5 V = 0 - Full Power, DC or Sine Wave Input Bandwidth< 100Kz Fiber coupler connector Beam Profile Internal Fiber Type Dimensions Weight FC/FC Multi-mode Flat top spatial-output 105 micron core multimode fiber (0.22 NA) L x W X H = 220 x 165 x mm (8.661 x x 2.19inch) 0.5 KG Precise Laser Light Source Page 14 / 15

15 Warranty: AEO Lasertech guarantees its products to be free of defects for one year from the date of shipment. During the warranty period, AEO Lasertech will, at its option, either repair or replace products which prove to be defective. Opening, modification and or servicing of this unit is expressly prohibited and will result in nullification of product warranty. This is in lieu of all other guarantees, expressed or implied, and does not cover incidental or consequential loss. Warranty does not cover Catastrophic Optical Damage (COD) caused by 100% retro-reflection of the laser light. If retro-reflection of this magnitude is expected, then an optical isolator is required. Precise Laser Light Source Page 15 / 15

Laser Diode Controller Instruction Manual

Laser Diode Controller Instruction Manual Russia, Moscow Tel. \ fax: (495) 333-93-01 www.nolatech.ru nolatech@mail.ru DLC-200 LD&TEC CONTROLLER Laser Diode Controller Instruction Manual Please read this Instruction Manual before using the unit.

More information

Thermoelectric Cooler Controller TED1000

Thermoelectric Cooler Controller TED1000 Thermoelectric Cooler Controller TED1000 Operating Instructions MANUAL-TED1000-1.0 Aug 2015 Rev.1 2 Contents 1 General... 4 1.1 Warranty and Assistance... 4 1.2 Maintenance... 4 1.3 General Safety Considerations...

More information

Master Oscillator Power Amplifier SLD System MOPA-SLD-850

Master Oscillator Power Amplifier SLD System MOPA-SLD-850 Master Oscillator Power Amplifier SLD System MOPA-SLD-850 1. Product Description The Superlum MOPA-SLD-850 is an ultra-high power SLD-based light source that features an extremely weak sensitivity to optical

More information

Multimode Laser-532 Installation and Operation Manual

Multimode Laser-532 Installation and Operation Manual Multimode Laser-532 Installation and Operation Manual For Products: Model LASER-532-IP-LAB Document: 000-31000-010-02-201503 WARNING Protective Eye Wear Should Be Worn When Using This Instrument - Intense

More information

RoHS COMPLIANT 2002/95/EC

RoHS COMPLIANT 2002/95/EC Superlum Broadband Light Sources cblmd-series (2nd Generation) Compact Broadband Light Technical Product Specification Document Number SL.3328.00.000D3 June 2017 Revision 001 ATTENTION ELECTROSTATIC SENSITIVE

More information

405 nm Diode Lasers. 14-pin BF, D-type OEM Module & Turn-key Systems. 405 nm Single-Mode Wavelength Stabilized Diode Lasers

405 nm Diode Lasers. 14-pin BF, D-type OEM Module & Turn-key Systems. 405 nm Single-Mode Wavelength Stabilized Diode Lasers 405 nm Diode Lasers 14-pin BF, D-type OEM Module & Turn-key Systems RPMC s proprietary Single-Mode Spectrum Stabilized Laser features high output power with ultra-narrow spectral bandwidth and a circularized

More information

OTEB-CO-B Series. Booster EDFA OPERATING MANUAL

OTEB-CO-B Series. Booster EDFA OPERATING MANUAL OTEB-CO-B Series Booster EDFA OPERATING MANUAL 24926 Highway 108 Sierra Village, CA 95346 Phone: (800) 545-1022 Fax: (209 586-1022 025-000533 Rev X6 E-Mail: sales@olsontech.com 27 Apr 2010 TABLE OF CONTENTS

More information

SLD-CS-series Compact High Power Broadband Light Source Modules.

SLD-CS-series Compact High Power Broadband Light Source Modules. Superlum Broadband Light Sources SLD-CS-series Compact High Power Broadband Light Source Modules. Technical Product Specification Document ID: SL.RD.04.002.150508 December 2015 Revision: 002 ATTENTION

More information

Operation Instruction for CNI Model with PSU-III-LCD

Operation Instruction for CNI Model with PSU-III-LCD Operation Instruction for CNI Model with PSU-III-LCD Caution-Use of controls or adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

More information

Agilent 86121A WDM Channel Analyzer

Agilent 86121A WDM Channel Analyzer Quick Reference Agilent 86121A At a Glance 2 WDM Channel Analyzer Display 3 Agilent 86121A Front Panel 7 Agilent 86121A Rear Panel 8 Measuring Wavelength and Power 9 Changing the Units and Measurement

More information

SWL-7500 Series Single Wavelength External Cavity Diode Laser

SWL-7500 Series Single Wavelength External Cavity Diode Laser USER S GUIDE SWL-7500 Series Single Wavelength External Cavity Diode Laser U.S. Patents #6,556,599 Use of controls or adjustments or performance of procedures other than those specified herein may result

More information

DBR Laser Module. Vescent Photonics, Inc E. 41 st Ave Denver, CO Phone: (303) Fax: (303)

DBR Laser Module. Vescent Photonics, Inc E. 41 st Ave Denver, CO Phone: (303) Fax: (303) DBR Laser Module Vescent Photonics, Inc. www.vescentphotonics.com 4865 E. 41 st Ave Denver, CO 80216 Phone: (303)-296-6766 Fax: (303)-296-6783 General Warnings and Cautions The following general warnings

More information

OTEB-CO-P PRE-AMP EDFA INSTRUCTION MANUAL

OTEB-CO-P PRE-AMP EDFA INSTRUCTION MANUAL OTEB-CO-P PRE-AMP EDFA INSTRUCTION MANUAL Phone: (209) 586-1022 (800) 545-1022 Fax: (209) 586-1026 E-Mail: salessupport@olsontech.com www.olsontech.com 025-000521 Rev. X1 10/01/2012 SAFETY WARNINGS LASER

More information

CUBE. Diode Laser System. Superior Reliability & Performance

CUBE. Diode Laser System. Superior Reliability & Performance Features Compact and modular OEM design Complete CDRH safety features for scientific and laboratory use TEC temperature-stabilized and conductively cooled through baseplate Analog and digital modulation

More information

EOS-6000 Series Optical A/B Switch User Manual DC Version

EOS-6000 Series Optical A/B Switch User Manual DC Version EOS-6000 Series Optical A/B Switch User Manual DC Version For more information on this and other products: Contact Sales at EMCORE 626-293-3400, or visit www.emcore.com. Table of Contents Table of Contents...2

More information

CW Fiber Laser. User s Manual. Products CEFL-KILO Platform B301 B302

CW Fiber Laser. User s Manual. Products CEFL-KILO Platform B301 B302 CW Fiber Laser User s Manual Products CEFL-KILO Platform B301 B302 UM n 53 Rev.03 December 2013 This product might be a class III-B or class IV fiber laser. Refer to the front panel label (or the lid)

More information

Butterfly Laser Diode Mount

Butterfly Laser Diode Mount LM14S2 Butterfly Laser Diode Mount Operating Manual LM14S2 Laser On TEC Driver LD Driver THORLABS, Inc. Ph: (973) 579-7227 435 Route 206N Fax: (973) 383-8406 Newton, NJ 07860 USA www.thorlabs.com 10614-D02

More information

Models 1417 and 1437 User s Manual. High-Speed Photodetector Modules

Models 1417 and 1437 User s Manual. High-Speed Photodetector Modules Models 1417 and 1437 User s Manual High-Speed Photodetector Modules Handling Precautions The detector is sensitive to electrostatic discharges and could be permanently damaged if subjected even to small

More information

GEVISTA. CWDM Pluggable OC-48 SFP Transceiver. Description

GEVISTA. CWDM Pluggable OC-48 SFP Transceiver. Description CWDM Pluggable OC-48 SFP Transceiver Description The CWDM-OC48-xx-80 is specifically designed for the high performance integrated duplex data transmission over single mode optical fiber. This transceiver

More information

LBO-H2 Series DIRECT PLUGGABLE LINKBRIDE TM FIBER OPTIC HDMI 2.0 TRANSMISSION SYSTEM

LBO-H2 Series DIRECT PLUGGABLE LINKBRIDE TM FIBER OPTIC HDMI 2.0 TRANSMISSION SYSTEM LBO-H2 Series DIRECT PLUGGABLE LINKBRIDE TM FIBER OPTIC HDMI 2.0 TRANSMISSION SYSTEM BCI reserves the right to make changes to the products described herein without prior notice or consent. No liability

More information

FIBER PIGTAILED ULTRA STABLE LASER MODULE OZ-1000, OZ-2000 & OZ-3000 SERIES. Preliminary

FIBER PIGTAILED ULTRA STABLE LASER MODULE OZ-1000, OZ-2000 & OZ-3000 SERIES. Preliminary 219 Westbrook Rd, Ottawa, ON, Canada, K0A 1L0 Toll Free: 1-800-361-41 Tel:(613) 831-0981 Fax:(613) 836-089 E-mail: sales@ozoptics.com FIBER PIGTAILED ULTRA STABLE LASER MODULE OZ-00, OZ-2000 & OZ-3000

More information

Laser & Peltier - TEC - Driver

Laser & Peltier - TEC - Driver Laser & Peltier - TEC - Driver Type: ds11-la3.5v48-pa08v24-o8007-v0-598 Laser max.: 3.5A - 48V TEC max.: 8A - 24V (max. 150W) In: 110..230VAC - Analog or Digital Modulation - Bias Current option - Pilot

More information

PLD Series +5V Laser Diode Drivers

PLD Series +5V Laser Diode Drivers PLD Series +5V Laser Diode Drivers General Description The PLD series of Laser Diode Drivers combines the high performance you expect from a Wavelength component with two distinct improvements: low voltage

More information

Installation Job Aid for Ethernet Routing Switch 3600 Series

Installation Job Aid for Ethernet Routing Switch 3600 Series Installation Job Aid for Ethernet Routing Switch 3600 Series Notices NN47213-303 Issue 03.01 November 2017 Notice paragraphs alert you about issues that require your attention. Following are descriptions

More information

AD-8923-BCD. Remote Controller (BCD) INSTRUCTION MANUAL 1WMPD

AD-8923-BCD. Remote Controller (BCD) INSTRUCTION MANUAL 1WMPD AD-8923-BCD Remote Controller (BCD) INSTRUCTION MANUAL 1WMPD4002137 2010 A&D Company, Limited. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated

More information

Coherent Magnum II. Structured Light Pattern Generating Laser FEATURES

Coherent Magnum II. Structured Light Pattern Generating Laser FEATURES Coherent Magnum II Structured Light Pattern Generating Laser Coherent s Magnum II structured light laser is a high-power line generator developed for the most demanding industrial applications. It is available

More information

StingRay and BioRay FEATURES

StingRay and BioRay FEATURES StingRay and BioRay Coherent s high-performance laser in a compact module, measuring only 19 mm in diameter, is the StingRay and BioRay product families. Modular design using the industries premier laser

More information

CC-M Multimode Cool & Control Module

CC-M Multimode Cool & Control Module CC-M Multimode Cool & Control Module A module to drive current and control temperature of high-brightness laser diodes up to 120W The Multimode Cool & Control (CC-M) module allows to control external single

More information

SLD-mCS/sCS-series Miniature High Power Broadband Light Source Modules

SLD-mCS/sCS-series Miniature High Power Broadband Light Source Modules SLD-mCS/sCS-series Miniature High Power Broadband Light Source Modules Technical Product Specification Document ID: SL.RD.01.001.170215 March 2017 Revision: 002 ATTENTION ELECTROSTATIC SENSITIVE DEVICES

More information

USER'S GUIDE TO OPERATION

USER'S GUIDE TO OPERATION STABILIZED WAVELENGTH HELIUM-NEON LASER SYSTEM USER'S GUIDE TO OPERATION Research Electro-Optics, Inc. 5505 Airport Boulevard Boulder, Colorado 80301 Phone - (303) 938-1960 Fax - (303) 447-3279 UNPACKING...

More information

HCC-CW-201A. CWDM Analyzer. Operation Guide

HCC-CW-201A. CWDM Analyzer. Operation Guide CWDM Analyzer Operation Guide Table of Contents Description... 3 Features... 3 Specifications... 4 Safety Information... 5 Preparing for Operation... 6 Unpacking the instrument... 6 Front keys definition...

More information

600 mw Fiber Bragg Grating Stabilized 14xx nm Pump Modules with Ultra-Low Power Consumption. S35 Series

600 mw Fiber Bragg Grating Stabilized 14xx nm Pump Modules with Ultra-Low Power Consumption. S35 Series 600 mw Fiber Bragg Grating Stabilized 14xx nm Pump Modules with Ultra-Low Power Consumption S35 Series www.lumentum.com Data Sheet The Lumentum S35 series 14xx nm, Laser Diode pump is wavelength selected

More information

iconverter 2-Module Power Chassis

iconverter 2-Module Power Chassis iconverter 2-Module Power Chassis User Manual 38 Tesla, Irvine, CA 92618 USA Phone: (949) 250-6510; Fax: (949) 250-6514 Page 1 Warning The operating description in this Instruction Manual is for use by

More information

OPR Power Series AC to DC POWER SUPPLY SERIES WITH REMOTE MANAGEMENT AND ALARM SYSTEMS. Model Nos. OPR065-48S / OPR065-48R. Manual

OPR Power Series AC to DC POWER SUPPLY SERIES WITH REMOTE MANAGEMENT AND ALARM SYSTEMS. Model Nos. OPR065-48S / OPR065-48R. Manual OPR Power Series AC to DC POWER SUPPLY SERIES WITH REMOTE MANAGEMENT AND ALARM SYSTEMS Model Nos. OPR065-48S / OPR065-48R Manual Revision F July 2009 Optimal Power Supplies LLC www.optimal-power.com i

More information

Model 500 Series Laser Diode Driver User's Manual

Model 500 Series Laser Diode Driver User's Manual Model 500 Series Laser Diode Driver User's Manual .0 INTRODUCTION The Model 500 Series Laser Diode Drivers are low noise, highly stable current sources for use with laser diodes. Selectable output current

More information

MODEL 805 USER MANUAL

MODEL 805 USER MANUAL MODEL 805 USER MANUAL All Rights Reserved Page 1 of 12 UNPACKING & INSPECTION Save all packing materials they are required for returns and warranty service. Inspect the 805 and packing materials for any

More information

Continuous Wave 532 nm Diode-Pumped Solid State Laser CDPS532M

Continuous Wave 532 nm Diode-Pumped Solid State Laser CDPS532M COMMERCIAL LASERS Continuous Wave 532 nm Diode-Pumped Solid State Laser CDPS532M Key Features Compact Excellent performance-to-price ratio Low noise Excellent beam quality High reliability Applications

More information

Continuous Wave Single Frequency Lasers. Concerto Series. 442nm 25, 50, 75 & 100mW

Continuous Wave Single Frequency Lasers. Concerto Series. 442nm 25, 50, 75 & 100mW User Manual Continuous Wave Single Frequency Lasers Concerto Series 442nm 25, 50, 75 & 100mW Copyright 2012, KLASTECH GmbH. All rights reserved. Information presented herein is believed to be accurate

More information

DC-AC Inverter Pure Sine Wave 120 Watt. Please read this manual before installing your Inverter. Manual PST

DC-AC Inverter Pure Sine Wave 120 Watt. Please read this manual before installing your Inverter. Manual PST DC-AC Inverter Pure Sine Wave 120 Watt PST-120-12 Owner's Manual Please read this manual before installing your Inverter Owner's Manual Index Section 1 Safety Instructions... 3 Section 2 Description, Layout

More information

DS1000B Series Digital Oscilloscope

DS1000B Series Digital Oscilloscope Quick Guide RIGOL Publication number QGA04114-1110 Feb. 2014 DS1000B Series Digital Oscilloscope DS1074B, DS1104B, DS1204B All Rights Reserved Copyright All Rights Reserved. RIGOL products are protected

More information

6100E Series DIGITAL FIBER OPTIC MULTI-CHANNEL AUDIO TRANSPORT SYSTEM

6100E Series DIGITAL FIBER OPTIC MULTI-CHANNEL AUDIO TRANSPORT SYSTEM 00E Series DIGITAL FIBER OPTIC MULTI-CHANNEL AUDIO TRANSPORT SYSTEM WITH DATA OPTIONS BCI reserves the right to make changes to the products described herein without prior notice or consent. No liability

More information

Emerson Network Power provides customers with technical support. Users may contact the nearest Emerson local sales office or service center.

Emerson Network Power provides customers with technical support. Users may contact the nearest Emerson local sales office or service center. Liebert PSA iton User Manual Version: V2.8 Revision date: November 14, 2005 Emerson Network Power provides customers with technical support. Users may contact the nearest Emerson local sales office or

More information

OLS Series Light Sources, OPM Series Optical Power Meters, and Related Test Kits User s Guide

OLS Series Light Sources, OPM Series Optical Power Meters, and Related Test Kits User s Guide OLS Series Light Sources, OPM Series Optical Power Meters, and Related Test Kits User s Guide 2004-2009, AFL Telecommunications, all rights reserved. COM4-00-1001 Revision E, 2009-06-16 Specifications

More information

MULTIDYNE INNOVATIONS IN TELEVISION TESTING & DISTRIBUTION INSTRUCTION MANUAL FMX-125

MULTIDYNE INNOVATIONS IN TELEVISION TESTING & DISTRIBUTION INSTRUCTION MANUAL FMX-125 MULTIDYNE INNOVATIONS IN TELEVISION TESTING & DISTRIBUTION INSTRUCTION MANUAL FMX-125 FIBER OPTIC, BI-DIRECTIONAL DATA, CONTACT CLOSURE and AUDIO MULTIPLEXER SYSTEM Revision: 0, Date: October 28, 2013

More information

Ultra Low Noise Laser 1550nm

Ultra Low Noise Laser 1550nm Ultra Low Noise Laser 1550nm User Manual Version 1.01 Last Updated 07/13/17 www.apichip.com T: 310 642-7975 F: 310 642-7829 Page 1 of 10 Revision Table Revision Description 1.0 Initial release 1.01 Cable

More information

Omnitron Systems Technology, Inc. 1. iconverter. 19-Module Managed Power Chassis User s Manual

Omnitron Systems Technology, Inc. 1. iconverter. 19-Module Managed Power Chassis User s Manual Omnitron Systems Technology, Inc. 1 iconverter 19-Module Managed Power Chassis User s Manual 27 Mauchly, #201, Irvine, CA 92618 Phone: (949) 250-6510; Fax: (949) 250-6514 2 Omnitron Systems Technology,

More information

User's Guide. MiniTec TM Series Model MN25 MultiMeter

User's Guide. MiniTec TM Series Model MN25 MultiMeter User's Guide MiniTec TM Series Model MN25 MultiMeter Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a

More information

TH2683 Insulation Resistance Meter. User s Mannual

TH2683 Insulation Resistance Meter. User s Mannual TH2683 Insulation Resistance Meter User s Mannual 1 CONTENTS Chapter 1 Genernal Information... 3 1.1 Feature Overview... 3 1.2 Operating Environment... 3 1.3 Dimensions and Weight... 3 1.4 Unpacking Inspection...

More information

Industrial Serial RS-232 to Fiber Converter. KSC-200 Series. Installation Guide

Industrial Serial RS-232 to Fiber Converter. KSC-200 Series. Installation Guide Industrial Serial RS-232 to Fiber Converter KSC-200 Series Installation Guide DOC.100803-KSC-200-1- (C) 2006 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any

More information

ANT CNTR DC ALRM LNB RX DC ALRM +18V OFF

ANT CNTR DC ALRM LNB RX DC ALRM +18V OFF Instruction Manual Model 2082-1972 Power Supply July 2012, Rev. B MODEL 2082 POWER SUPPLY CROSS TECHNOLOGIES INC. PRIMARY PWR AC BUC +48V AUX BUC TX SELECT 48V +18V/48V LNB RX +18V ANT CNTR +29V AC 18V

More information

PM-204A/B. Power Meter. Operation Guide

PM-204A/B. Power Meter. Operation Guide Power Meter Operation Guide Contents 1. Introduction...3 2. Warranty...3 3. Safety Information...3 4. Preparing for Operation...4 4.1. Unpacking the instrument...4 4.2. Discharged batteries...4 4.3. AC

More information

Agilent 70612B K18 Switch Matrix

Agilent 70612B K18 Switch Matrix Agilent 70612B K18 Switch Matrix Hardware Reference Manual Agilent Technologies COPYRIGHT 2000 AGILENT TECHNOLOGIES, INC. ALL RIGHTS RESERVED. NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM OR

More information

Model A Mini AC/DC Clamp Meter. User's Guide

Model A Mini AC/DC Clamp Meter. User's Guide Model 380950 80A Mini AC/DC Clamp Meter User's Guide Introduction Congratulations on your purchase of the Extech 80A Mini AC/DC Clamp Meter. The Model 380950 measures AC/DC Current, AC/DC Voltage, Resistance,

More information

Sacher Lasertechnik Group

Sacher Lasertechnik Group TEC070 TEC072 DBR Butterfly Laser Mount User Manual http://www.sacher-laser.com Warranty This Sacher Lasertechnik Group product is warranted against defects in materials and workmanship for a period of

More information

±15 V Current-Limited Power Supply

±15 V Current-Limited Power Supply USER S GUIDE ±15 V Current-Limited Power Supply Model 0901 Newport Corporation 3635 Peterson Way Santa Clara, CA 95054 www.newport.com/newfocus EU Declaration of Conformity We declare that the accompanying

More information

LASERS FOR ANALYTICAL INSTRUMENTATION

LASERS FOR ANALYTICAL INSTRUMENTATION LASERS FOR ANALYTICAL INSTRUMENTATION CW Lasers (Broad and Narrow Spectrum) Nanosecond SLM Lasers Accessories ADVANTAGES One size One control interface One voltage (+5 VDC) One software Many wavelengths

More information

Single Phase Systems-North American PC125/PC420 Series

Single Phase Systems-North American PC125/PC420 Series Single Phase Systems-North American PC125/PC420 Series Enclosure Power Distribution Units (epdu ) PC125-C Front RACK MOUNTED 19 x 3.4 (2U) x 8.5. Approximate shipping weight: 19 lbs. (12) NEMA OUTLETS

More information

INSTRUCTION MANUAL HIGH CURRENT DRIVER BOARD STAND ALONE

INSTRUCTION MANUAL HIGH CURRENT DRIVER BOARD STAND ALONE Instruction Manual High Current Driver Board Stand Alone 1 INSTRUCTION MANUAL HIGH CURRENT DRIVER BOARD STAND ALONE Models: 1 AMP: HCDBSA1_0AMP 1.5 AMP: HCDBSA1_5AMP 2.0 AMP: HCDBSA2_0AMP 2.5 AMP: HCDBSA2_5AMP

More information

PCD 005 PolaMIX. Operation Manual

PCD 005 PolaMIX. Operation Manual PCD 005 PolaMIX All-Fiber Polarization Scrambler Module with Microprocessor Controller Operation Manual July 29, 2011 General Photonics Corp. Ph: (909) 590-5473 5228 Edison Ave. Fax: (909) 902-5536 Chino,

More information

20W Tungsten-Halogen Light Source. Operation Manual

20W Tungsten-Halogen Light Source. Operation Manual 20W Tungsten-Halogen Light Source - ASB-W-020 - Operation Manual Important Safety Notices 1. Never look directly into the light beam, including through the cooling fan while light is on, as this can cause

More information

LASERS FOR ANALYTICAL INSTRUMENTATION

LASERS FOR ANALYTICAL INSTRUMENTATION CW Lasers Combiners Q-switch Lasers >20 s MM/SM/PM fiber Single-frequency options 405 nm to 660 nm 4 wavelengths Open beam or Fiber 1029 nm / 514.5 nm High pulse energy Single Longitudinal Mode LASERS

More information

PIM-Mini Pulsed Current Source Operation Manual

PIM-Mini Pulsed Current Source Operation Manual PIM-Mini Pulsed Current Source Operation Manual Directed Energy, Inc. 1609 Oakridge Dr., Suite 100, Fort Collins, CO 80525 (970) 493-1901 sales@ixyscolorado.com www.ixyscolorado.com Manual Document 7650-0007

More information

Model 3955 DFB 1550nm Laser in TO-can

Model 3955 DFB 1550nm Laser in TO-can Model 3955 DFB 1550nm Laser in TO-can Applications Video signal distribution in HFC and FTTx nodes CWDM Signal distribution in L-band and wireless remoting links High linearity, low power fiber links Features

More information

UHP-T-LED User Manual

UHP-T-LED User Manual UHP-T-LED User Manual Ver 03 July 2014 UHP-T-LED System Description The UHP-T-LED is an Ultra High Power LED light source for fluorescence microscopy, Optogenetics, High power illumination and other applications.

More information

Multicom 1550nm High Power Erbium Doped Fiber Amplifier MUL 2RU EDFA 1550 XX xx

Multicom 1550nm High Power Erbium Doped Fiber Amplifier MUL 2RU EDFA 1550 XX xx Multicom 1550nm High Power Erbium Doped Fiber Amplifier User Manual v.2 www.multicominc.com 800 423 2594 407 331 7779 1076 Florida Central Parkway, Longwood, FL 32750 SAFETY NOTIFICATION The Multicom MUL

More information

CM-220 True RMS AC CLAMP METER INSTRUCTION MANUAL

CM-220 True RMS AC CLAMP METER INSTRUCTION MANUAL CM-220 True RMS AC CLAMP METER INSTRUCTION MANUAL Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further information.

More information

Rhino Buffer Module PSM24-BFM600S. Operating Instructions

Rhino Buffer Module PSM24-BFM600S. Operating Instructions Rhino Buffer Module PSM24-BFM600S Operating Instructions RHINO BUFFER MODULE PSM24-BFM600S Description The PSM24-BFM600S Buffer Module will hold the output voltage of a 24 VDC power supply after brownouts

More information

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED

More information

Operating Instruction for IQ Series laser diode module Instructions for IQ1C, IQ2C, IQ4C, IQ6, IQ7, IQ1A, IQ2A, IQ4A, IQ1H, IQ2H and IQ4H

Operating Instruction for IQ Series laser diode module Instructions for IQ1C, IQ2C, IQ4C, IQ6, IQ7, IQ1A, IQ2A, IQ4A, IQ1H, IQ2H and IQ4H OI_new IQ Series_noµproc.docx September 2013 Page 1 of 7 Operating Instruction for IQ Series laser diode module Instructions for IQ1C, IQ2C, IQ4C, IQ6, IQ7, IQ1A, IQ2A, IQ4A, IQ1H, IQ2H and IQ4H The latest

More information

Universal AC Power Source + AC Power Analyzer

Universal AC Power Source + AC Power Analyzer User's Guide Universal AC Power Source + AC Power Analyzer Model 380820 Introduction Congratulations on your purchase of the Extech Model 380820. This Universal AC Power Source and AC Power Analyzer can

More information

User Operation Manual: Motorized Valve Controller for Valved Sources

User Operation Manual: Motorized Valve Controller for Valved Sources User Operation Manual: Motorized Valve Controller for Valved Sources Table of Contents BEFORE YOU BEGIN...2 Safety Precautions...2 Product Concerns...2 Specifications...3 Support...3 INTRODUCTION...4 Product

More information

Diode Laser System. -with integrated water cooled Diode laser up to 400W optical output power

Diode Laser System. -with integrated water cooled Diode laser up to 400W optical output power Type: dst11-t19xx-ho -with integrated water cooled Diode laser up to 400W optical output power The product series dst11-t19-ho combines the features and reliability of OsTech Laser- and TEC controllers

More information

ITA100 MKII 100mW green DMX laser

ITA100 MKII 100mW green DMX laser ITA100 MKII 100mW green DMX laser User manual Safety instructions WARNING! Always keep this device away from moisture and rain! Hazardous electrical shocks may occur! WARNING! Only connect this device

More information

Line Impedance Stabilization Network (LISN)

Line Impedance Stabilization Network (LISN) Model 3816/2 Line Impedance Stabilization Network (LISN) User Manual ETS-Lindgren Inc. reserves the right to make changes to any product described herein in order to improve function, design, or for any

More information

TEC-BT temperature controller User manual

TEC-BT temperature controller User manual rev 1.01 / 2012 12 04 TEC-BT temperature controller User manual Overview TEC-BT thermocontroller is designed to control the temperature of the objects and to stabilize its temperature at the certain level.

More information

TRC-190 User s Manual

TRC-190 User s Manual User s Manual Edition 3.2, May 2017 www.moxa.com/product 2017 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used only

More information

User s Guide. 600A True RMS AC/DC Clamp Meter. Model 38389

User s Guide. 600A True RMS AC/DC Clamp Meter. Model 38389 User s Guide 600A True RMS AC/DC Clamp Meter Model 38389 Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further

More information

Genesis MX STM-Series

Genesis MX STM-Series Genesis MX STM-Series TEM00 Visible OEM and End-User OPS Laser Systems Applications like Flow Cytometry, Particle Counting, DNA Sequencing and Microscopy are enable by low noise, visible true CW lasers.

More information

OPERATOR MANUAL OSD361 FIBER OPTIC CCTV TRANSMITTER MODULE

OPERATOR MANUAL OSD361 FIBER OPTIC CCTV TRANSMITTER MODULE OPERATOR MANUAL OSD361 FIBER OPTIC CCTV TRANSMITTER MODULE OSD361 FIBER OPTIC CCTV TRANSMITTER MODULE Document No. 10102303 PAGE 1 INDEX 1 1 TECHNICAL SUMMARY... 3 1.1 BRIEF DESCRIPTION...3 1.1.1 OVERVIEW...

More information

Manual Supplement. Manual Title: ESA609 Users Supplement Issue: 7 Print Date: February 2014 Date: 2/19 Revision/Date: 1 Page Count: 13

Manual Supplement. Manual Title: ESA609 Users Supplement Issue: 7 Print Date: February 2014 Date: 2/19 Revision/Date: 1 Page Count: 13 Manual Title: Supplement Issue: 7 Print Date: February 2014 Date: 2/19 Revision/Date: 1 Page Count: 13 This supplement contains information necessary to ensure the accuracy of the above manual. This manual

More information

Sidewinder Pumps Inc. AC Timer/Controller

Sidewinder Pumps Inc. AC Timer/Controller Sidewinder Pumps Inc. AC Timer/Controller Page 1 of 12 Rev 032417 Table of Contents 1. Warnings-------------------------------------------------------------------------------------------------- 3 1.1.

More information

OPTICAL HEADEND PLATFORM OTOHP-CH 3RU CHASSIS OTOHP-PS POWER SUPPLY MODULE OTOHP-BP BLANK PANEL INSTRUCTION MANUAL

OPTICAL HEADEND PLATFORM OTOHP-CH 3RU CHASSIS OTOHP-PS POWER SUPPLY MODULE OTOHP-BP BLANK PANEL INSTRUCTION MANUAL OPTICAL HEADEND PLATFORM OTOHP-CH 3RU CHASSIS OTOHP-PS POWER SUPPLY MODULE OTOHP-BP BLANK PANEL INSTRUCTION MANUAL Phone: (209) 586-1022 (800) 545-1022 Fax: (209) 586-1026 OTOHP-CH Rev. X1 E-Mail: salessupport@olsontech.com

More information

Installing the ASA 5550

Installing the ASA 5550 CHAPTER 3 Installing the ASA 5550 Caution Read the safety warnings in the Regulatory Compliance and Safety Information for the Cisco ASA 5500 Series and follow proper safety procedures when performing

More information

OBIS LX/LS 6-Laser Remote

OBIS LX/LS 6-Laser Remote OBIS LX/LS 6-Laser Remote Laser Remote and Power Supply for up to Six Lasers OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. The for OBIS LS and

More information

FIBER. WP-TEST-FIBER-400 Optical Power Meter Owner s Manual

FIBER. WP-TEST-FIBER-400 Optical Power Meter Owner s Manual FIBER WP-TEST-FIBER-400 Optical Power Meter Owner s Manual Technical Support: p. 866.838.5052 2017 Wirepath Ver. 170419-1000 Contents Chapter 1. Standard Configuration... 2 Chapter 2. Overview... 2 Chapter

More information

RoHS COMPLIANT 2002/95/EC

RoHS COMPLIANT 2002/95/EC Document ID: SL.QC... May Revision: ATTENTION ELECTROSTATIC SENSITIVE DEVICES RoHS COMPLIANT /95/EC Page of 9 Contents Product Description / Applications / Features... Mechanical specification... Electrical

More information

Fast Optical Power Monitor

Fast Optical Power Monitor Fast Optical Power Monitor OPM200 Highlights Maximum input power Noise equivalent power (NEP RMS ) Small signal rise time ( 10-90%) Bandwidth Wide selection of photodiodes 30 mw 300 nw 35 ns 10 MHz 200-2100

More information

PM-100 SERIES. Operation Guide. Power Meter V

PM-100 SERIES. Operation Guide. Power Meter V PM-100 SERIES Power Meter Operation Guide V5.27.16 Contents 1 Introduction...2 2 Warranty...2 3 Safety Information...3 4 Preparing for Operation...3 4.1 Unpacking the instrument...3 4.2 Discharged batteries...3

More information

NL100 Nitrogen Laser Stanford Research Systems

NL100 Nitrogen Laser Stanford Research Systems Operation and Service Manual NL100 Nitrogen Laser Stanford Research Systems Revision 1.12 January 24, 2014 Certification Stanford Research Systems certifies that this product is in compliance with IEC

More information

LASERS FOR ANALYTICAL INSTRUMENTATION

LASERS FOR ANALYTICAL INSTRUMENTATION LASERS FOR ANALYTICAL INSTRUMENTATION CW Lasers (Broad and Narrow Spectrum) Nanosecond SLM Lasers Accessories ADVANTAGES One size One control interface One voltage (+5 VDC) One software Many wavelengths

More information

OPERATING INSTRUCTION

OPERATING INSTRUCTION OPERATING INSTRUCTION AUTORANGING MULTIMETER MAX Ω F C 10A MAX every 15 min. COM V SAFETY INFORMATION The following safety information must be observed to insure maximum personal safety during the operation

More information

HypotULTRA. Quick Start Guide SAFETY CHECKLIST. Survey the test station. Make sure it is safe & orderly.

HypotULTRA. Quick Start Guide SAFETY CHECKLIST. Survey the test station. Make sure it is safe & orderly. EN 61010-1 EN 61010-31 Quick Start Guide HypotULTRA for the following models: 7800, 7820, 7850 SAFETY CHECKLIST Survey the test station. Make sure it is safe & orderly. Always keep unqualified/unauthorized

More information

Manual for PSDC_OPT_EIGHT_01: Optics Power Supply

Manual for PSDC_OPT_EIGHT_01: Optics Power Supply Manual for PSDC_OPT_EIGHT_01: Optics Power Supply Optics Power Supply Version 1.1 June 9, 2009 Page 1 of 23 Manual for PSDC_OPT_EIGHT_01: Optics Power Supply Table of Contents 1.0 Packing List... 4 1.1

More information

TRC-190 User s Manual

TRC-190 User s Manual First Edition, November 2008 www.moxa.com/product 2008 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. The software described in this manual is furnished under a license agreement

More information

GM8012 Optical Power Meter. User Manual

GM8012 Optical Power Meter. User Manual GM8012 Optical Power Meter User Manual Aug., 2010 ( 此图片还没更新为最新 ) Notices This document contains UC INSTRUMENTS CORP. proprietary information that is protected by copyright. All rights are reserved. This

More information

Page 2 262/264 LaserMount User s Manual. Table of Contents

Page 2 262/264 LaserMount User s Manual. Table of Contents Page 2 262/264 LaserMount User s Manual Table of Contents Introduction... 3 Safety Terms and Symbols... 3 Installation and Use... 4 Connector Pin-Outs... 7 Technical Specifications... 9 Mechanical Drawings...

More information

MONITOR Shiloh Road Alpharetta, Georgia (770) FAX (770) Toll Free

MONITOR Shiloh Road Alpharetta, Georgia (770) FAX (770) Toll Free Instruction Manual Model 1584-25 Splitter December 2009 Rev B MITOR 1 MITOR 2 A B MODEL 1584 DIVIDER CROSS TECHNOLOGIES C. Data, drawings, and other material contained herein are proprietary to Cross Technologies,

More information

Installation and Operation Back-UPS BR1000G-IN / BR1500G-IN

Installation and Operation Back-UPS BR1000G-IN / BR1500G-IN Installation and Operation Back-UPS BR1000G-IN / BR1500G-IN Important Safety Information Read the instructions carefully to become familiar with the equipment before trying to install, operate, service

More information

Wiring Section 3-3. NQ-Series communication ports support various types of (serial) communication.

Wiring Section 3-3. NQ-Series communication ports support various types of (serial) communication. 3-3 Wiring NQ-Series models have, besides one power connector, a number of communication ports. Please refer to Table 2.2: Common specifications for NQ-Series and Table 2.3: Specifications per NQ-Series

More information

NL-02 NL-02. The NL-02 InoxLaser uses time-offlight laser technology for continuous non-contact distance or level measurement.

NL-02 NL-02. The NL-02 InoxLaser uses time-offlight laser technology for continuous non-contact distance or level measurement. www.lightware.co.za info@lightware.co.za The InoxLaser uses time-offlight laser technology for continuous non-contact distance or level measurement. Able to measure to any solid surface, at any angle,

More information