MIRA M2320 series Halfslim SSD Specification. v0.1

Transcription

1 1 MIRA M2320 series Halfslim SSD Specification v0.1

2 2 Revision History Date Version Changes compared to previous issue Jun 1 nd, Initial Release

3 3 Table of Contents Introduction:... 4 Main Feature:... 4 Block Diagram... 5 Product Images:... 6 SATA SSD Pin Assignment:... 8 System Power Requirement:... 9 Environment Specifications:... 9 Reliability: Performance: Physical Dimension Specifications: Mechanical Form Factor:... 11

4 4 Introduction: The MIRA M2320 series SSD is main stream, high performance and high capacity mass storage solution with SATA interface. Utilizing commercial grade temperature MLC NAND flash components and high speed catch on NAND for data buffering, MIRA M2320 series SSD offers normal operating temperature, provides outstanding performance and proven reliability for products operating outside the standard temperature. Main Feature: Compact design: JEDEC MO-297 Compliant. Capacities: 4GB to 128GB. Maximum performance: Sequential read up to 160MB/s, sequential write up to 130MB/s. Operating temperature: 0 to 70 o C. Compliant with Serial ATA Revision 2.6. Compatible with SATA 1.5Gb/s and SATA 3.0Gb/s interface rates. Enhanced endurance by dynamic and static wear-leveling. Hardware ECC correction engine. Support S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) ATA feature set. Support Native Command Queuing (NCQ) command. Sudden power off recovery. RoHS, CE, FCC & VCCI certification.

5 5 Block Diagram MIRA M2320 series SSD consists of below functional blocks. The advanced architecture is optimized to provide highest data reliability and transfer performance. MIRA M2320 Halfslim SATA II controller High bandwidth AHB Bus SATA Host Device Voltage Regulator (5V to 3.3V/ 1.8V) High Performance ARM Core SRAM ROM ECC Engine Flash Control NAND Flash Memory

6 6 Product Images: Capacities: MIRA P/N MIHSAJMA004GB-GR MIHSAJMA008GB-GR MIHSAJMA016GB-GR MIHSAJMA032GB-GR MIHSAJMA064GB-GR MIHSAJMA128GB-GR CAPACITY 4GB 8GB 16GB 32GB 64GB 128GB

7 7 Notes: 1. 1 GB = 1,000,000,000 Byte

8 8 SATA SSD Pin Assignment: Group Signal Segment Power Segment Pin 1 Function Description No. S1 GND Ground S2 A+ S3 A- Differential signal pair A S4 GND Ground S5 B- Differential signal pair B S6 B+ S7 GND Ground Key & Spacing P1 NC/V V power (Not used) P2 NC/V V power (Not used) P3 NC/V V power (Not used) P4 GND Ground P5 GND Ground P6 GND Ground P7 V 5 5V power, pre-charge P8 V 5 5V power P9 V 5 5V power P10 GND Ground P11 DAS Device Activity Signal P12 GND Ground P13 NC/V 12 12V power (Not used) P14 NC/V 12 12V power (Not used) P15 NC/V 12 12V power (Not used)

9 9 System Power Requirement: Parameter Symbol Min Typ Max Unit Remark Supply voltage V CC V Read/Write power P W W RMS value Standby power P S W RMS value Environment Specifications: Type Temperature Humidity Vibration Shock Altitude Operating Non-Operating Operating Non-Operating Operating Non-Operating Operating Non-Operating Operating Non-Operating Value 0 o C to 70 o C -40 o C to 85 o C 25 o C,8% to 95%, noncondensing 40 o C,8% to 93%, noncondensing

10 10 Reliability: Type Data Retention Value o C Endurance Enhanced global dynamic and static wear-leveling algorithm MTBF (@ 25 o C) 1 2,000,000 hours Notes: 1. The Mean Time Between Failures (MTBF) is calculated using a prediction methodology, Telcordia SR-332, which based on reliability data of the individual components in the SSD. It assumes nominal voltage, with all other parameters within specified range. Performance: Type Host Interface Speed Data Transfer Rate 1 Value SATA 1.5 Gb/s and SATA 3.0 Gb/s Sequential Read: up to 160MB/s Sequential Write: up to 130MB/s Random Read/Write IOPS Notes: 1. The performance may vary according to different product capacity. 2. IOPS: Input/Output Operations per Second Physical Dimension Specifications: Type Form factor Length Width Thickness Value HalfSlim SATA 54 mm +/- 0.05mm 39 mm +/- 0.05mm 4 mm +/- 0.05mm

11 11 Mechanical Form Factor (Units in mm):