HEIGHT ADJUSTMENT. Manual Crank - Front/Top Mounted
|
|
- Noreen Atkinson
- 5 years ago
- Views:
Transcription
1 Series 3 User Guide
2 HEIGHT ADJUSTMENT Manual Crank - Front/Top Mounted The worksurface adjusts via a simple hand crank. Turn hand crank clockwise to raise the desk and counterclockwise to lower the desk. Four turns of the crank adjusts a 2-leg (rectangular) Desk by 1". Six turns of the crank adjusts a 3-leg (90 or 120 ) Desk by 1". Note: For a visual demonstration, please visit youtube.com/steelcasetv
3 BI-LEVEL MECHANISM ADJUSTMENT Adjusting the Keyboard Worksurface Actuator Handle Tilt Knob Keyboard Worksurface Tilt Knob The Keyboard Worksurface can be raised as much as 6" or lowered as much as 4.5". Release the Actuator Handle (under the worksurface, on the left) by gently pulling it toward the front edge of the worksurface. While holding the Actuator Handle in the released position, push down or up on the Keyboard Worksurface to achieve the desired height. Let go of the Actuator Handle to lock the keyboard worksurface height. Keyboard Worksurface Actuator Handle Tilt Knob The Keyboard Worksurface can be tilted forward or backward. Release the Keyboard Worksurface by unscrewing the Tilt Knobs on both sides of the mechanism. Turn each Tilt Knob counterclockwise. Tilt the Keyboard Worksurface to the desired angle. Gently retighten the Tilt Knobs on both sides of the mechanism by turning them each clockwise.
4 Cable Management When installing equipment, either on the worksurface or below, be sure that the connecting cables are free of obstruction. A trough is available from your dealer to manage excess cables. Use this trough to minimize possible entanglements. Workstation Design Tips Ensure that power cords for all accessory items computer, lights, monitors, etc. are of sufficient length to reach outlets throughout the range of worksurface height adjustment. Do not subject the cords to any strain while adjustment of the surface is taking place. Always check for proper operating clearance before placing any item on, above or below the worksurface. Maintenance and Cleaning Regularly clean dust and dirt from Lifting Columns. To ensure all surfaces are thoroughly cleaned, make sure the Lifting Columns are fully extended to their maximum height. Also, be sure to inspect the Lifting Columns for damage. Check all connections for both correct function and secure mounting. Caution: A damp cloth is recommended. To protect the painted surfaces, use a cleanser that is not highly alkaline or acidic. A ph neutral product is ideal. Note: Please do not move the desk without help. Refer to the guidelines at the end of the assembly instructions, or contact your facilities group for assistance. Troubleshooting Step 1: Check that all Driveshafts are connected to each other and fully engaged with the Gearbox and Lifting Columns. Step 2: Check that the desk is not overloaded. Weight capacity is 205 lbs.
5 Product Specification Range of Adjustment Glide Adjustment Distributed Weight Capacity Tip: When calculating lifting capacity, subtract the weight of the worksurface. Wire Management Included Controller Gearbox Ratio 22" 34" (559 mm 864 mm) 5/8" (16 mm) 205 lbs (93 kg) (2-leg or 3-leg)* No Manual Crank (front-mounted or top-mounted) 4:1 (2-leg) / 6:1 (3-leg) * Weight of Worksurface: ~4.9 lbs/ft 2 or ~.034 lbs/in 2 Rectangular tops weigh 27 lbs 74 lbs; 58"x29" tops weigh 57 lbs. 90º tops weigh 49 lbs 107 lbs; 58"x58" (23"D) tops weigh 74 lbs. 120º tops weigh 49 lbs 101 lbs; 52"x52" tops weigh 80 lbs.
6 Visit steelcase.com Part Number # Rev. C 4/ All rights reserved. All specifications subject to change without notice. Printed in U.S.A.
RISK OF SERIOUS INJURY OR DEATH
Ology User Guide WARNING Crush Hazard Keep Clear 3 X 1 NO CHILDREN RISK OF SERIOUS INJURY OR DEATH Raising or 2lowering desk can trap or crush body parts. DO NOT OPERATE THIS EQUIPMENT UNLESS PROPERLY
More informationPower Cable. Low-Voltage Cable
Troubleshooting Guide Power Cable Low-Voltage Cable Wire Manager Power Supply Driveshaft Driveshaft Cover Master Motor (can be on either side) Controller Controller Cable Lifting Column Foot Stretcher
More informationOLOGY HEIGHT-ADJUSTABLE DESKS AND BENCHES. Troubleshooting Guide
Troubleshooting Guide Power Cable Cantilevers Control Box Active Touch Controller Lifting Column Foot Understructure OLOGY HEIGHT-ADJUSTABLE DESKS AND BENCHES HOW THEY WORK Each Lifting Column contains
More informationOLOGY HEIGHT-ADJUSTABLE DESKS. Troubleshooting Guide
Troubleshooting Guide Power Cable Cantilevers Control Box Low-Voltage Cable Controller Lifting Column Foot Understructure OLOGY HEIGHT-ADJUSTABLE DESKS HOW THEY WORK Each Lifting Column contains an individual
More informationOLOGY HEIGHT-ADJUSTABLE DESKS. Troubleshooting Guide
Troubleshooting Guide Power Cable Cantilevers Control Box Low-Voltage Cable Controller Lifting Column Foot Understructure OLOGY HEIGHT-ADJUSTABLE DESKS HOW THEY WORK Each Lifting Column contains an individual
More informationSERIES 7/9 TABLES & SERIES 8 BENCH. Troubleshooting Guide
Troubleshooting Guide Cable Manager Low-Voltage Cable Stretcher Power Cable Controller Control Box Lifting Column Foot SERIES 7/9 TABLES & SERIES 8 BENCH HOW THEY WORK Each Lifting Column contains an individual
More informationSERIES 7 TABLES PRE-DECEMBER Troubleshooting Guide. IMPORTANT NOTE: This guide applies to models shipped prior to December 2015 only.
Troubleshooting Guide Control Box (PRE-DECEMBER 2015) Low-Voltage Cable Cable Manager Controller Lifting Column Stretcher Foot Power Cable SERIES 7 TABLES PRE-DECEMBER 2015 HOW THEY WORK Each Lifting Column
More informationSERIES 5 TABLES/BENCH
Wire Manager Driveshaft Driveshaft Cover Stretcher Power Cable Low-Voltage Cable Power Supply Master Motor (can be on either side) Controller Controller Cable Lifting Column Foot SERIES 5 TABLES/BENCH
More informationOV1001 Part No OV1001 HEIGHT ADJUSTABLE TABLE USER GUIDE
OV1001 Part No. 23620 OV1001 HEIGHT ADJUSTABLE TABLE USER GUIDE PRODUCT OVERVIEW User Guide: OV1001 OV1001 HEIGHT ADJUSTABLE TABLE A healthier work environment starts with the option to sit or stand throughout
More informationOV1000 Part No OV1000 HEIGHT ADJUSTABLE TABLE USER GUIDE
OV1000 Part No. 23624 OV1000 HEIGHT ADJUSTABLE TABLE USER GUIDE PRODUCT OVERVIEW User Guide: OV1000 OV1000 HEIGHT ADJUSTABLE TABLE A healthier work environment starts with the option to sit or stand throughout
More informationCLIMB2 DUAL MONITOR SIT/STAND WORKSTATION
CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION CLIMB2 Rev A 3/17 Model CLIMB2-SLV ASSEMBLY AND ADJUSTMENT CLIMB2 PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
More informationSpread-Loc. Operators Guide. Spreader. Vinten Camera Control Solutions
Operators Guide Spread-Loc Spreader Vinten Camera Control Solutions Vision Spread-Loc Spreader Publication Part No. 3781-8 Issue 3 Copyright Vinten Broadcast Limited 2004 All rights reserved throughout
More informationCharts + Carts + Accessories
work tools Charts + Carts + Accessories Mbrace accessories... 43 Sit stand accessories... 41 Mbrace mounts... 43 Sit stand workstations... 40 Mobile laptop cart... 41 E ERGONOMIC WORKSTATIONS WORK TOOLS
More informationAssembly Instructions
Assembly Instructions Flat Screen Garage End User & IT Computer Cable Management May 2013 nylon zip-tie #2 (for computer wires) rear-access beam door (open) Figure 1 nylon zip-tie #1 (for #1 motor control
More informationModel RD-4 Remote Time Display
Model 820-218 RD-4 Remote Time Display Serial Number March 28, 1997 Revision D TABLE OF CONTENTS SECTION PARAGRAPH TITLE ONE GENERAL INFORMATION 1.1 Scope of Manual 1.2 Purpose of Equipment 1.3 Physical
More informationC935 Series. Maintenance Guide
C935 Series Maintenance Guide April 2007 www.lexmark.com Contents...3 Cleaning the exterior of the printer...3 Storing supplies...3 Conserving supplies...3 Checking the status of supplies...4 Checking
More informationProduct Overview. Features
APCF1 Model Tripod Product Overview The Ravelli APCF1 is a Professional Quality Carbon Fiber Tripod providing a solid base for high-end photographic equipment. This model is a mix of carbon fiber and magnesium
More informationSpotting Scope Instruction Manual
Spotting Scope Instruction Manual 841103 / 846060T 03-16 SETUP and OPERATION Congratulations on the purchase of your Simmons spotting scope, a versatile high-performance spotting scope offering a wide
More informationDUAL-ARM MONITOR MOUNT For in. ( cm) desktop computer monitors
LeviTouch DM-502 DUAL-ARM MONITOR MOUNT For 15 27 in. (38.1 68.6 cm) desktop computer monitors User Manual Thank you for choosing Gabor. The Gabor Dual-Arm Desktop Mount can securely support two monitors
More informationSpotting Scope Instruction Manual
Spotting Scope Instruction Manual Model#s : 841100 / 841101 Lit. #: 98-0080 / 11-09 1 SETUP and OPERATION Congratulations on the purchase of your Simmons spotting scope, a versatile high-performance spotting
More informationLotus DX. sit-stand workstation. assembly and operation instructions. MODEL # s: LOTUS-DX-BLK LOTUS-DX-WHT
Lotus DX assembly and operation instructions sit-stand workstation MODEL # s: LOTUS-DX-BLK LOTUS-DX-WHT safety warnings 13.6 Kg 30 lbs. 2.2 Kg 5 lbs. safety instructions/warning Read and follow all instructions
More informationOV1016 Part No OV1016 HEIGHT ADJUSTABLE BENCHING SYSTEM USER GUIDE
OV1016 Part No. 86042 OV1016 HEIGHT ADJUSTABLE BENCHING SYSTEM USER GUIDE PRODUCT OVERVIEW User Guide: OV1016 OV1016 HEIGHT ADJUSTABLE BENCHING SYSTEM Our best-selling value table base is now available
More informationDX-M. Owner s Manual. Photo Tripod
DX-M Owner s Manual Photo Tripod Thank you for choosing Magnus. Congratulations on the purchase of your new Magnus tripod. This tripod features a rapid center column that detaches to serve as an adjustable
More informationUser Manual. Binocular Zoom Stereo Microscope with Boom Stand. MicroscopeNet.com
User Manual Binocular Stereo Microscope with Boom Stand Model W42C1 Series MicroscopeNet.com Table of Contents i. Caution.. 1 ii. Care and Maintenance... 1 1. Component Illustration... 2 2. Installation...3
More informationOperators Guide. Vision 3 Pan & Tilt Head. Vinten Camera Control Solutions
Operators Guide Vision 3 Pan & Tilt Head Vinten Camera Control Solutions Vision 3 Pan and Tilt Head Publication Part No. 3543-8 Issue 4 Copyright Vinten Broadcast Limited 2004 All rights reserved throughout
More informationT-4 = ADJUSTABILITY 2.
2. T-4 = ADJUSTABILITY Start with a simple equation. One table with four leg configurations is a well-designed line of desking. Multiply it by 27" of height adjustability; add privacy screens and overheads,
More informationFlex Insight Desk. Technical Specifications. Color Options. 36 W x 24 D Single desk. 42 W x 30 D Single ADA desk. 36 W x 30 D Single desk
Technical Specifications Flex Insight Desk 38979 36 W x 24 D Single desk 36 W x 30 D Single desk 42 W x 30 D Single ADA desk 60 W x 24 D Double desk 60 W x 30 D Double desk 72 W x 24 D Double desk 72 W
More informationMoving-Minds.com Treadmill Desk Operation
LifeSpan Treadmill Desk - Owner s Manual Models DT-5/DT-7 Desk Assembly DT-5 Desk........................................................................................ Assembly Instructions..........................................................................
More informationX940e, X945e. Maintenance Guide
X940e, X945e Maintenance Guide July 2010 www.lexmark.com Contents...3 Storing supplies...3 Checking the status of supplies...3 Checking the status of supplies from the control panel... 3 Printing a menu
More informationUser Manual. Trinocular Stereo Microscope
User Manual Trinocular Stereo Microscope Model V434 XV434 Series MicroscopeNet.com Table of Contents i. Caution.. 1 ii. Care and Maintenance... 2 1. Component Illustration... 3 2. Installation 4 3. Operation....6
More informationIGB Series. Operation Manual. Platform Scale. Kg/Lb Specification IMPORTANT
Platform Scale IGX/ Kg/Lb Specification Operation Manual IMPORTANT Do not carry out installation, operation, service, or maintenance until thoroughly understanding the contents of this manual. Keep this
More informationAstroJet TM M2 Quick Start Guide
AstroJet TM M2 Quick Start Guide Step 1 Remove Printer and Accessories from packaging. Place Printer on a flat, even surface. Step 2 Remove Service Station Transport Tab 1. Open Top Cover. 2. Open Print
More informationInstallation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate
Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate The purpose of this guide is to: 1. Describe mounting
More informationOperators Guide. Vision 8 Pan & Tilt Head. Vinten Camera Control Solutions
Operators Guide Vision 8 Pan & Tilt Head Vinten Camera Control Solutions Vision 8 Pan and Tilt Head Publication Part No. 3441-8 Issue 4 Copyright Vinten Broadcast Limited 2004 All rights reserved throughout
More informationSECTION 6. COMPUTER ACCESSORIES
SECTION 6. COMPUTER ACCESSORIES CPU HOLDER...6.2 FLAT SCREEN ARMS...6.3 FLAT SCREEN ARM WITH POST...6.4 SLATWALL / BIN RAIL...6.5 FLATSCREEN ARM FOR SLATWALL / BIN RAIL...6.5 FLAT SCREEN KEYBOARD PLATFORM...6.6
More informationPV Series. Owner s Manual. Photo Tripod
PV Series Owner s Manual Photo Tripod Thank you for choosing Magnus. Congratulations on the purchase of your new Magnus tripod. This tripod features an adjustable center column for smooth and precise camera
More informationALL-FLEX ELECTRIC TABLE BASE
ALL-FLEX ELECTRIC TABLE BASE FLEX2 V3 Rev 01 7 /17 Model FLEX2-SLV-V3 Model FLEX2-BLK-V3 Model FLEX2-WHT-V3 ASSEMBLY AND OPERATION ALL-FLEX ELECTRIC TABLE BASE PARTS AND TOOLS PLEASE REVIEW these instructions
More informationAssembly Instructions
Assembly Instructions Preface We are delighted that you have chosen NextDesk. Congratulations, you have selected the most advanced and sophisticated power-adjustable workstation available today. Our bodies
More informationUser Manual. Binocular Stereo Microscope. MicroscopeNet.com
User Manual Binocular Stereo Microscope Model K2213 Series MicroscopeNet.com Table of Contents i. Caution... 1 ii. Care and Maintenance... 1 1. Components Illustration... 2 2. Installation... 3 3. Operation...
More informationInstallation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
More informationUser Manual. Trinocular Stereo Microscope
User Manual Trinocular Stereo Microscope Model V436 XV436 Series MicroscopeNet.com Table of Contents i. Caution.. 1 ii. Care and Maintenance... 1 1. Component Illustration... 2 2. Installation 3 3. Operation....4
More informationSolaris+ User Manual V1.0 Tel: +49 (0)
User Manual G-LEC Solaris+ User Manual To avoid danger, you should read this user manual thoroughly before use of the product This product is for professional use only and not designed for home or residential
More informationOperators Guide. Vision 11 Pan & Tilt Head. Vinten Camera Control Solutions
Operators Guide Vision 11 Pan & Tilt Head Vinten Camera Control Solutions Vision 11 Pan and Tilt Head Publication Part No. 3442-8 Issue 1 Copyright Vinten Broadcast Limited 2001 All rights reserved throughout
More informationMD-BSL15W / SPRING-LOADED TWIN-ARM. For ( cm) LCD desktop computer. User Manual
MD-BSL15W / SPRING-LOADED TWIN-ARM MONITOR mount For 15 27 (38.1 68.6 cm) LCD desktop computer User Manual Thank you for choosing Gabor. The Gabor MD-BSL15W mounts two 15 27 (38.1 68.6 cm) LCD computer
More informationMonitor Arms Keyboard Trays Lighting Organization & Power
Extensions 2 Monitor Arms Keyboard Trays Lighting Organization & Power The Key to Future Growth Extensions, a collection of ergonomic, lighting, organizational, and power accessories, is utilized across
More informationMAGIXBOX TM. Quick Start Guide
TM TM by TouchMagix MAGIXBOX TM Quick Start Guide What s in the box: Ankle Ceiling Plate Extendable Rod Connector Piece Middle Piece Universal Spider Super clamp with ball socket Safety Cable Projector
More informationReplacement Instructions
imac G5 Inverter, 20-inch Replacement Instructions Follow the instructions in this document carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note: Online
More informationASTRO UW-1C and RW-1C LABEL PRINTER UNWINDER & WINDER
ASTRO UW-1C and RW-1C LABEL PRINTER UNWINDER & WINDER OPERATOR MANUAL ASTRO MACHINE CORP. 630 Lively Blvd. Elk Grove Village, IL 60007 Phone: (847) 364-6363 Fax: (847) 364-9898 www.astromachine.com SAFETY
More informationVortex Series 2-leg Desk Assembly Guide
ELECTRIC HEIGHT-ADJUSTED SIT TO STAND DESK Vortex Series 2-leg Desk Assembly Guide For desk with underframe Model No. AL4628-XX REV-1509A Table of Contents IMPORTANT SAFETY INSTRUCTIONS... 3 CAUTION, USE
More informationVPC-64/ VPX-64 VIDEO POLE CAMERA OPERATION MANUAL
VPC-64/ VPX-64 VIDEO POLE CAMERA OPERATION MANUAL RESEARCH ELECTRONICS INTERNATIONAL 455 Security Drive Algood, TN 38506 U.S.A. +1 931-537-6032 http://www.reiusa.net/ COPYRIGHT RESEARCH ELECTRONICS INTERNATIONAL
More informationUser's Guide Ergotron LX
User's Guide Ergotron LX USA 1-800-888-8458 Europe +31 20 312.29.39 1 A B C D E F 75-100mm #8-32 M4 x 10mm M4 x 10mm 3/32" 2 2x 7/16" For optimum ergonomic viewing, set top of monitor screen 1 below eye
More informationVacuum Maintenance Manual (EXCERPT Tim Benedict)
1. Position a ladder, scaffold, or work stand, on the right side of Vacuum Skid where the blower motors are installed. 2. Locate the six (6) vacuum hoses connecting the blower motors to the HEPA housings
More informationInstallation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.
More informationCisco TelePresence VX Clinical Assistant TM
Cisco TelePresence VX Clinical Assistant TM ACCESSORIES INSTALLATION GUIDE Drawer Module, PC Cabinet Module, PC Shelf, and Storage Pods...2 Laptop Shelf...3 Scope Hooks, WAP Mount, and Splash Cover...4
More informationSolo. Assembly Instructions
Solo Assembly Instructions Preface We are delighted that you have chosen NextDesk. Congratulations, you have selected the most advanced and sophisticated power-adjustable workstation available today. Our
More informationDC POWER SUPPLY. Model: PW-3063R / PW-4063R
DC POWER SUPPLY INSTRUCTION MANUAL Model: PW-3063R / PW-4063R Table of Contents: Notice Before Operation Maintenance General Maintenance Panel Description 1. Symbol Description 2. Front Panel Description
More informationIMPULSE G2/PULSE HEIGHT ADJUSTABLE TABLE LIFTING COLUMN: DL17 CONTROL: DPF1C CONTROL BOX: CBD6S PART # CONTROL MECHANISM OVERVIEW PAGE 1 OF 6
PART # 1608996 LIFTING COLUMN: DL17 CONTROL: DPF1C CONTROL BOX: CBD6S PAGE 1 OF 6 CONTROL BOX WIRING DIAGRAM Hook for cable relief DL17 DL17 DPF1C Mains Cable BASIC HEIGHT ADJUSTABLE FUNCTIONS RAISING
More informationM40 Microscope User s Manual
M40 Microscope User s Manual for M40 and M40RT Microscope Components: Trinocular Port Eyepieces Beam Splitter Field Diaphragm Adjustment Aperture Diaphragm Adjustment Filter Slots Analyzer Polarizer Hex
More informationEpson SureColor F6070 Setup Guide
Epson SureColor F6070 Setup Guide 2 Unpacking and Assembling the Printer Read all of these instructions before using your printer. Also be sure to follow all warnings and instructions marked on the printer
More informationUniversal Height-Adjustable Tables
Universal Height-Adjustable Tables Freestanding, height-adjustable tables play an increasingly important role in contemporary office planning. Recent studies suggest that moving throughout the day can
More informationBUSINESS FURNITURE PARTS LIST & SPECIFICATIONS EFFECTIVE: JANUARY 1, 2012
BUSINESS FURNITURE PARTS LIST & SPECIFICATIONS EFFECTIVE: JANUARY 1, 2012 415 Finchdene Square Scarborough, Ontario. Canada M1X 1B7 Tel: 416-298-9137 Fax: 416-298-9458 Email:calstone@calstoneinc.com www.calstoneinc.com
More informationMacro View All in One Scope Description. 2. Features. 3. Package Contents
Macro View All in One Scope 26700-104-00 1. Description Portable system ideal for inline use This self-contained video inspection system is a compact unit, that simplifies quality checks at any stage of
More informationRack Installation Instructions
Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. Before installing your server in a rack cabinet, review the following guidelines:
More informationInstallation and Operation Manual
Installation and Operation Manual ATCP Physical Engineering Rua Lêda Vassimon, n 735-A - Ribeirão Preto - SP / Brasil CEP 14026-567 Telephone: +55 (16) 3289-9481 www.atcp-ndt.com Installation and Operation
More informationGenesis Adjustable desk system WASHINGTON STATE CORRECTIONAL INDUSTRIES
Genesis Adjustable desk system WASHINGTON STATE CORRECTIONAL INDUSTRIES Adaptable, Ergonomic, Powerful 1. 8 0 0. 6 2 8. 4 7 3 8 2 www.washingtonci.com Start with a simple equation. One table with four
More information3 Maintenance. Chapter contents
3 Maintenance Chapter contents Life expectancies of consumables..................... 40 User-replaceable parts.............................. 40 Replacing the printer pickup roller................ 41 Replacing
More informationCONTENTS IMPORTANT SAFETY INSTRUCTIONS.. 3 PRECAUTIONS.. 4 BEFORE USE.. 5 TURNTABLE PARTS. 5 LISTENING TO A RECORD. 5
1 CONTENTS IMPORTANT SAFETY INSTRUCTIONS.. 3 PRECAUTIONS.. 4 BEFORE USE.. 5 TURNTABLE PARTS. 5 LISTENING TO A RECORD. 5 HOW to REPLACE the TURNTABLE STYLUS (NEEDLE)... 6 RECORD YOUR VINYL to PC using WINDOWS
More informationPower Supply, 17-inch
apple imac G5 Power Supply, 17-inch Replacement Instructions Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note:
More informationSerial No. OWNER S MANUAL. Installation & Operation
Serial No. OWNER S MANUAL Installation & Operation Table of Contents Safety & Warranty Warnings 01 Parts List 02 GhostBed Electronics Quick Reference Guide... 03 Installation Guide 04 GhostBed Remote Control
More information200 lb (90.7 kg) 2 People Required. 250 lb (113.4 kg)
Weight Capacity 200 lb (90.7 kg) 2 People Required Weight Capacity 250 lb (113.4 kg) 2 People Required x2 x4 x4 For patent and trademark information, visit VARIDESK.com/patents 2018 VARIDESK. All Rights
More informationCarl's Table : CT15 OWNER'S MANUAL & TROUBLE-SHOOTING GUIDE
OWNER'S MANUAL & TROUBLE-SHOOTING GUIDE Carl's Table : CT15 Part Number: CT15SM/DG Anthro Corporation 10450 SW Manhasset Dr. Tualatin, OR 97062 Toll-free: 800.325.3841 Fax: 800.325.0045 email: sales@anthro.com
More informationCENTRO 6451/6452 LIFT DESK
CENTRO 6451/6452 OWNER S MANUAL Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PARTS REQUIRED efloat Parts A A (1) Top Frame (consists of two separate weldments) B (2) Legs C D (2) Feet (1) Smart Controller - 7.3 (186.2 mm) x 3.9" (100.4 mm) D E (1) Touchpad
More informationStarsysXD Assembly INSTRUCTIONS FOR USE. For Enclosed Shells and Angular Adjustable qwikslot TM Wire Shelves DOUBLE WIDE - MOBILE UNIT
INSTRUCTIONS FOR USE StarsysXD Assembly SINGLE WIDE - MOBILE UNIT DOUBLE WIDE - MOBILE UNIT TRIPLE WIDE - MOBILE UNIT Cart Load Capacities: Adjustable qwikslot TM Shelves: Single Wide = 300 lbs. (136 kg)
More informationMY-HITE ADJUSTABLE TABLE
Y-HITE ADJUSTABLE TABLE odel Number : FSQAHT Please Read Instructions Before Use ASSEBLY INSTRUCTIONS Tools Needed Thank you for choosing Friant. We appreciate the trust and confidence you have placed
More informationSovella Concept Workstation. Solutions A to Z DEDICATED TO HUMAN WORKSPACE.
Sovella Concept Workstation Solutions A to Z DEDICATED TO HUMAN WORKSPACE www.sovella.us Sovella Concept Workstation Solutions... A to Z Concept workstations are designed for the needs of industry, where
More informationDual TV/Monitor Desk Mount Stand (Duplex Series) Model: DE9E2S-S
Dual TV/Monitor Desk Mount Stand (Duplex Series) Model: DE9E2S-S Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct information represented
More informationOperators Guide. Vision 100 Pan & Tilt Head. Vinten Camera Control Solutions
Operators Guide Vision 100 Pan & Tilt Head Vinten Camera Control Solutions Vision 100 Pan and Tilt Head Publication Part No. 3431-8 Issue 3 Copyright Vinten Broadcast Limited 2004 All rights reserved throughout
More informationThe Nureva Span ideation system. Installation guide. Single panoramic system
The Nureva Span ideation system Installation guide Single panoramic system Important SAFETY WARNINGS Prior to the installation of this product, the installation instructions should be completely read and
More information3500 Series Tripod Kit
3500 Series Tripod Kit You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! This versatile and durable Oben tripod and ballhead is a compact and lightweight kit that sets up quickly, folds
More informationBEVEL GEAR WINCH RATIO 3:1
BEVEL GEAR WINCH RATIO 3:1 32 A 34 57 48 45 B 89 82,5 45 54 17 6,5 C Bevel gear in Zamak. Conic mechanism in Zamak. Steel spring brake. Efficiency: 0,60 Floating on ball in Nylon. Right and left rotation.
More informationUser Manual. Rack Mount Display Monitor - 4K RMP-161-4K17. 7U 17.3 inch Rack Mount Display Monitor
User Manual Rack Mount Display Monitor - 4K RMP-161-4K17 7U 17.3 inch Rack Mount Display Monitor Options : - DC 9~36V power input - Touchscreen - AR hardness glass Contents < Part. 1 > RMB-17W-4K 1.1 Package
More informationC-pan arm USERS INSTRUCTIONS
C-pan arm USERS INSTRUCTIONS Designed 1 of 12 and made in Denmark Thanks for purchasing a 9.Solutions product. With great passion, we design our products to be as versatile as possible. We hope that our
More informationLeica XL Universal Base User Manual
Leica XL Universal Base User Manual Important Safety Notes Safety concept Before using your microscope for the first time, please read the Safety concept brochure included with your instrument. It contains
More informationOwner s Manual Havis Universal Tablet Cradle
Owner s Manual Havis Universal Tablet Cradle Related Products Havis offers a wide variety of accessory products for use with the UT-301 Universal Tablet Cradle. For more information or to order, please
More information2.2. Facilities Requirements
2.2. Facilities Requirements Facilities requirements for the alpha-se system are listed in Table 2-1 and the system dimensions are given in Figure 2-1. As shown in Figure 2-2, the preferred clear work
More informationBPL SERIES INSTALLATION INSTRUCTIONS THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
BPL SERIES INSTALLATION INSTRUCTIONS Important Warning THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. This product must be installed in accordance with National Electrical
More informationSEQUEL 6051/6052 LIFT DESK
SEQUEL 6051/6052 customerservice@ OWNER S MANUAL Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to
More informationDual Gas Spring Desktop Mount
Mounts With functionality, flexibility, and ease of installation at top of mind, V7 mounts are designed with high grade durable materials that compliment the connected displays. Rigorous fatigue, load,
More informationPVS-14 Slide to Side Quick Detach Weapon Mount
USER MANUAL PVS-14 Slide to Side Quick Detach Weapon Mount SM34001 English ENGLISH FEATURES: Slide to side action Quick detach weaver mount Made from durable aluminum Fits PVS-14 monocular TECHNICAL SPECIFICATIONS:
More informationWhen You Need More Than Staples. Toll Free: Fax: Electric VeloBinder Operating Instructions
When You Need More Than Staples. Toll Free: 800-658-8788 Fax: 801-927-3037 info@abcoffice.com Electric VeloBinder Operating Instructions IMPORTANT SAFEGUARDS Warning: For your protection, do not connect
More informationHard Drive, 20-inch. Replacement Instructions
apple imac G5 Hard Drive, 20-inch Replacement Instructions Follow the instructions in this document carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note:
More informationSetup Guide. Confirming the Installation Space. Installation space (W x D x H) 70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm) 23.
Introductory Information Setup Guide ENGLISH Read this manual before attempting to operate the printer. Keep this manual in a handy location for future reference. Caution Instructions in this Setup Guide
More informationCT12. Carl s Table. Its innovative design and usability earned Carl s Table Best of NeoCon 2008, awarded by international leaders in product design.
CARL S TABLE is the most advanced radiology workstation developed so far. Adjust the height and tilt of the work surface with the push of a button so you can work comfortably throughout the day sitting,
More informationOPERATING USER MANUAL for PRESSURE RECORDERS
Serial No. OPERATING USER MANUAL for PRESSURE RECORDERS MNW-004 Rev. E 03/21/16 Palmer Instruments Inc. 234 Old Weaverville Road Asheville, NC 28804 Toll Free: 800-421-2853 Phone: 828-658-3131 Fax: 828-658-0728
More information1.0: Index. Return Of Goods Solartron Sales Offices For drawings please contact 1.0: Index
1.0: Index Section Title Page 1.0 Index................................. 1 2.0 Safety Summary......................... 2 3.0 Introduction Digital Probe, Linear Encoder and Orbit ACS.......................
More information9-pin dot matrix printer
9-pin dot matrix printer All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
More informationWhisper-Ride
11/16/2007 LR (1) CAUTION: Before you begin any of the installation procedures on page 3, read and follow the warnings and safety instructions on this page. WARNING! THIS IS NOT A TOY! WARNING! CHILDREN
More informationThanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443
Thanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST: 2 Metal Plate Stands 5 Greenery
More informationZip12. Charging Desktop Cabinet. User's Guide. Components. Tools Needed ENGLISH. Requires 2 people to remove from box. 6mm. M6 x 35mm Security Screw
User's Guide Zip12 Charging Desktop Cabinet Requires 2 people to remove from box. Components 1 A B C D E 4x 6.5mm ID 12mm OD 1mm TH Tools Needed 1x 6mm 5-sided Security Wrench 1x M6 x 35mm Security Screw
More information