AS7.P CF20 NPT DOCK AS7.P CF20 DPT DOCK AS7.P CF20 NPT DOCK WITH SCREEN LOCK AS7.P CF20 DPT DOCK WITH SCREEN LOCK AS7

Transcription

1 AS7.P CF20 NPT DOCK AS7.P CF20 DPT DOCK AS7.P CF20 NPT DOCK WITH SCREEN LOCK AS7.P CF20 DPT DOCK WITH SCREEN LOCK AS7.P CF20 SCREEN LOCK ARM PANASONIC TOUGHBOOK CF20 VEHICLE DOCK USER GUIDE

2 CF-20 VEHICLE DOCK 11.2 REAR HOOK 2.25 LOCK LOCATING PINS PROTECTIVE CONNECTOR COVER 9.75 FRONT HOOKS SCREEN LOCK MOUNTING POSITION LATCH RELEASE EXTERNAL WIRELESS WAN ANTENNA PORT (EX ANT 1) EXTERNAL WIRELESS LAN/GPS ANTENNA PORT (EX ANT 2) ANTENNA SWITCH - INTERNAL / EXTERNAL GPS POWER LAN USB HDMI SERIAL VGA

3 CF-20 VEHICLE DOCK DOCKING TABLET LINE UP THE ARROWS ON THE DOCK TO THE POCKETS ON THE LAPTOP. THIS MARKS THE POSITION OF THE FRONT HOOKS. ANGLE THE LAPTOP TOWARDS THE FRONT HOOKS FIRST. THEN PUSH DOWN FIRMLY ON THE REAR OF THE LAPTOP THE DOCK WILL CLICK TO CONFIRM SUCCESSFUL DOCKING OF THE LAPTOP THE INDICATOR ON THE FRONT OF THE DOCK, SHOWS THE USER IF THE LAPTOP IS CORRECTLY UNDOCKED OR DOCKED. IN THIS IMAGE THE INDICATOR IS SHOWN TO BE UNDOCKED. THE INDICATOR ON THE FRONT OF THE DOCK, SHOWS THE USER IF THE LAPTOP IS CORRECTLY UNDOCKED OR DOCKED. IN THIS IMAGE THE INDICATOR IS SHOWN TO BE DOCKED THE CF-20 LAPTOP IS SECURELY HELD EVEN WITHOUT USING THE KEY. IF YOU REQUIRE ADDITIONAL SECURITY PLEASE USE KEY PROVIDED TO LOCK THE CF-20 LAPTOP TO THE DOCK.

4 CF-20 VEHICLE DOCK UNDOCKING LAPTOP TO REMOVE LAPTOP. ENSURE KEY IS IN UNLOCK POSITION. FIRMLY PUSH SLIDER FORWARD UNTIL THE SLIDER IS FULLY DEPRESSED. THE LAPTOP WILL POP UP AND WILL BE RELEASED. USING THE LAPTOP HANDLE PULL THE LAPTOP UP FROM THE REAR TO REMOVE LAPTOP FROM DOCK. NOTE SOME MINOR COSMETIC WEAR MAY BECOME VISIBLE ON THE OUTER CASE OF THE CF20 LAPTOP WITH REPEATED USE OF THE CF20 DOCKING STATION. PLEASE NOTE THAT THIS IS ONLY COSMETIC AND IN NO WAY DETIORATES THE PERFORMANCE OF EITHER THE LAPTOP OR DOCKING STATION.

5 CF-20 VEHICLE DOCK CABLE MANAGEMENT CONNECT ALL CABLES SECURELY TO DOCK USE CABLE TIES TO SECURE CABLES TO THE CABLE TIE RAIL. NEATLY ORGANIZE CABLES TO PREVENT WIRING FROM BEING ACCIDENTALLY DISCONNECTED. ATTACH MOUNTING PLATE TO DOCK AFTER SECURING ALL CABLES. WIRING TIP: PMT DOES NOT RECOMMEND RELYING ON A CIGARETTE SOCKET ADAPTOR FOR POWERING VEHICLE DOCKS. WE RECOMMEND HARD WIRING USING A GOOD CLEAN GROUND DIRECT FROM THE VEHICLE BATTERY (-) POST, AND (+) SUPPLY FROM A FUSED 12V LOCATION ALSO DIRECTLY FROM THE VEHICLE BATTERY. ALL PERIPHERALS CONNECTING TO THE DOCKING STATION SHOULD GET POWER AND GROUND FROM THE SAME LOCATION AS THE DOCK. VISIT FOR A COPY OF OUR GENERAL WIRING AND TROUBLESHOOT- ING GUIDE. For more info visit: Or call us at info@precisionmounts.com

6 CF-20 VEHICLE DOCK DOCK MOUNTING THE CF-20 VEHICLE DOCK FEATURES A UNIVERSAL MOUNTING PLATE. IT USES HOLE PATTERNS FROM PMT, GAMBER JOHNSON AND THE STANDARD VESA 75MM X 75MM HOLE PATTERN. THIS ALLOWS FOR EASY MOUNTING TO MANY PRE-EXISTING MOUNTS, AS WELL AS DEDICATED MOUNTS FROM PMT. WE RECOMMEND USING THE VESA PATTERN WITH THE 1/4-20 FLATHEAD SCREWS & NYLOK NUTS PROVIDED WITH YOUR DOCK, TO SECURE TO MOUNTING INFRASTRUCTURE. ATTACH MOUNTING PLATE TO MOUNTING INFRASTRUCTURE FIRST, THEN ATTACH DOCK TO MOUNTING PLATE AFTER ATTACHING CABLES.

7 AS7.P US Patent No. 10,067,533S PANASONIC CF20 SCREEN LOCK USER GUIDE

8 CF-20 SCREEN LOCK KEY LOCK FRONT SCREEN SUPPORT LOCKING PIN PIVOTING FASTENER MOUNTING FASTENERS LOCKING SET SCREW

9 CF-20 SCREEN LOCK MAKE SURE SCREEN LOCK IS ROTATED OUT OF THE WAY. THEN INSERT LAPTOP IN DOCK. ROTATE SCREEN LOCK UP UNTIL IT CONTACTS THE REAR OF THE LAPTOP SCREEN. THEN SLIDE FRONT SCREEN SUPPORT OVER BEZEL INSERT KEY AND ROTATE. THE LOCKING PIN WIL ENGAGE INTO KENSINGTON LOCK SLOT OF THE CF20 LAPTOP SCREEN. THIS WILL NOW STOP THE REMOVAL OF THE TABLET SCREEN SECTION. THE SCREEN SECTION OF THE CF20 LAPTOP IS NOW LOCKED TO THE DOCK. THE SCREEN CAN BE USED IN ANY POSITION WITH THE SCREEN LOCK ATTACHED. THE FRONT SCREEN SUPPORT WILL RETRACT WHEN THE SCREEN IS CLOSED. YOU WILL MANUALLY NEED TO SLIDE THE SUPPORT INFRONT OF THE SCREEN WHEN USING THE LAPTOP. THIS PROVIDES SUPPORT FOR LAPTOP HINGE.

10 CF-20 SCREEN LOCK THE CF-20 SCREEN LOCK IS AN ACCESSORY THAT MOUNTS TO THE SIDE OF THE DOCK. WITH FASTENERS PROVIDED. FROM TIME TO TIME THE SCREEN LOCK MAY BECOME LOOSE WHICH MEANS IT WILL NO LONGER PROVIDE SUPPORT TO THE LAPTOP HINGE. TO RE-TIGHTEN THE HINGE YOU NEED TO: 1) LOOSEN OFF THE LOCKING SET SCREW WITH A 5/64 ALLEN KEY 2) TIGHTEN THE PIVOTING FASTENER TO 20 IN/LBS USING A 5/32 TORQUE SETTING ALLEN DRIVER 3) APPLY RED LOCTITE TO THREADS OF LOCKING SET SCREW 4) TIGHTEN LOCKING SET SCREW WITH A 5/64 ALLEN KEY