BMXAMI0410 analog input module M340-4 inputs - high speed

Transcription

1 Characteristics analog input module M340-4 inputs - high speed Main Range of product Product or component type Electrical connection Isolation between channels Input level Analogue input number 4 Analogue input type Complementary Analog/Digital conversion Analogue input resolution Input impedance Permitted overload on inputs Internal conversion resistor Precision of internal conversion resistor Type of filter Fast read cycle time Nominal read cycle time Apr 6, 2019 Modicon X80 Analog input module 1 connector 20 ways Isolated High level Current +/- 20 ma Current ma Current ma Voltage +/- 10 V Voltage +/- 5 V Voltage V Voltage V Voltage V 24 bits 16 bits 10 MOhm +/- 30 V +/- 10 V +/- 30 V +/- 5 V +/- 30 V V +/- 30 V V +/- 30 V V +/- 90 ma +/- 20 ma +/- 90 ma ma +/- 90 ma ma 250 Ohm 0.1 % - 15 ppm/ C First order digital filtering 1 ms + 1 ms x number of channels used 5 ms for 4 channels 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

2 Measurement error <= 0.1 % of full scale +/- 10 V C <= 0.1 % of full scale +/- 5 V C <= 0.1 % of full scale V C <= 0.1 % of full scale V C <= 0.1 % of full scale V C <= 0.3 % of full scale +/- 20 ma C <= 0.3 % of full scale ma C <= 0.3 % of full scale ma C % of full scale +/- 10 V 25 C % of full scale +/- 5 V 25 C % of full scale V 25 C % of full scale V 25 C % of full scale V 25 C 0.15 % of full scale +/- 20 ma 25 C 0.15 % of full scale ma 25 C 0.15 % of full scale ma 25 C Temperature drift Recalibration Common mode between channels Digital value format Isolation voltage Measurement resolution Maximum conversion value Status LED Product weight Current consumption 15 ppm/ C +/- 10 V 15 ppm/ C +/- 5 V 15 ppm/ C V 15 ppm/ C V 15 ppm/ C V 30 ppm/ C +/- 20 ma 30 ppm/ C ma 30 ppm/ C ma Internal 120 db +/ by default +/ in user scale 300 V DC between channels 1400 V DC between channels and ground 1400 V DC between channels and bus 0.35 mv +/- 10 V 0.35 mv +/- 5 V 0.35 mv V 0.35 mv V 0.35 mv V 0.92 µa +/- 20 ma 0.92 µa ma 0.92 µa ma +/ V +/- 10 V +/ V +/- 5 V +/ V V +/ V V +/ V V ma +/- 20 ma ma ma ma ma 1 LED green RUN 1 LED per channel green channel diagnostic 1 LED red ERR 1 LED red I/O kg 150 ma at 3.3 V DC 45 ma at 24 V DC Environment Vibration resistance Shock resistance 3 gn 30 gn Ambient air temperature for storage C Ambient air temperature for operation C Relative humidity IP degree of protection Directives Product certifications % 55 C without condensation IP /19/EU - WEEE directive 2014/30/EU - electromagnetic compatibility 2014/35/EU - low voltage directive CE CSA

3 UL RCM Merchant Navy EAC Standards EN EN EN EN Protective treatment Operating altitude TC m m (with derating factor) Offer Sustainability Sustainable offer status RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions Green Premium product Compliant - since Schneider Electric declaration of conformity Schneider Electric declaration of conformity Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Available Product Environmental Profile Available End of Life Information Contractual warranty Warranty period 18 months 3

4 Dimensions Drawings Modules Mounted on Racks Dimensions (1) With removable terminal block (cage, screw or spring). (2) With FCN connector. (3) On AM1 ED rail: 35 mm wide, 15 mm deep. Only possible with BMXXBP0400/0400H/0600/0600H/0800/0800H rack. Rack references a in mm a in in. BMXXBP0400 and BMXXBP0400H BMXXBP0600 and BMXXBP0600H BMXXBP0800 and BMXXBP0800H BMXXBP1200 and BMXXBP1200H

5 Connections and Schema Wiring Diagram IVx + pole input for channel x COM 0Vx- pole input for channel x ICx current reading resistor + input Channel 0voltage sensor Channel 12-wire current sensor 5