LPC1788 Mio Board. User Manual. Revision 1.0 1

Size: px
Start display at page:

Download "LPC1788 Mio Board. User Manual. Revision 1.0 1"

Transcription

1 User Manual Revision 1.0 1

2 Designed by CoiNel Technology Solutions LLP No-32, 2 nd Floor, HAPBCO Tower, 9 th Main, RPC Layout, Hampinagar, Bangalore State: Karnataka Country: India Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where CoiNel is aware of trademark claim, the product name appears in initial capital letters, in all capital or in accordance with the vendor s capitalization preference. Users should contact appropriate companies for more complete information on trademark and trademark registrations. All trademarks and registered trademarks in this manual are the property of their respective holders. No part of this manual may be reproduced or distributed in any form or by any means, or stored in the database or retrieval system, without the prior written permission from CoiNel Technology Solutions LLP; with the exception that the listings may be entered, stored and executed in a computer system, but they may not be reproduced. The content in this manual are presented for instruction value. The details have been carefully tested, but are not guaranteed for any particular purpose. CoiNel Technology Solutions does not offer any warranties and does not guarantee the accuracy, adequacy, or completeness of any information herein and is not responsible for any errors or omissions. CoiNel Technology Solutions LLP assumes no liability for damages resulting from use of such information in this manual or for any infringement of intellectual property rights of third parties that would result from use of this information. This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION and EDUCATION OR EVALUATION PURPOSES ONLY and is not considered by CoiNel Technology Solutions LLP to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies CoiNel Technology Solutions LLP from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user s responsibility to take any and all appropriate precautions with regard to electrostatic discharge. EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. CoiNel Technology Solutions LLP assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Revision 1.0 2

3 Log: The version of the development: Revision 1 Document Version: Manual_ 1 Revision 1.0 3

4 TABLE OF CONTENTS: 1. INTRODUCTION 5 2. HANDLING WARNINGS 6 3. KIT DELIVARABLES 6 4. BOARD USE REQUIREMENTS 6 5. FUNCTIONAL BLOCK DIAGRAM 7 6. BOARD LAYOUT 8 7. HARDWARE RESOURCES 10 Revision 1.0 4

5 1. INTRODUCTION: The LPC1788 Mio is based on Cortex M3 Core, running at up to 120MHz. The Mio lets you quickly start with your development on LPC1788 based designs. This user guide describes how to use. The functional details of the board are as follows- MCU: LPC1788. o Package: BGA-208. o Pin Compatible with ARM7 LPC2478 and Cortex M4 LPC4088 External SDRAM MT48LC64M4A2 (256 MBits X 2) FLASH AT25DF641, Interface SPI (optional) 20 PIN 2.54 mm JTAG Header, 10 pin 1.27mm SWD/JTAG Connectivity options. On Board Reset and ISP On Board 12 MHz Clock On Board KHz Clock for RTC Micro SD Card Interface via MCI Option to connect Graphical LCD (TM12864H6CCOWA) Part of MiO Package Option to connect Graphical LCD (TM12864A8CCWGWA1) (Optional) On Board Test LED and Buzzer USB Device (USB1) USB Host (USB1 and USB2) On Board POT connected via ADC 0.0 On Board CAN Transceiver (MCP2551) CAN1 2 x UART (RS232) UART0 and UART2 + TTL Outputs for UART0 and UART2 (Any one at a time) Unloading component (MAX232) may be required for take TTL logic outputs. On Board PS2 Keyboard Connectivity Option Two switches via GPIO Ethernet Connectivity via DP83848 PHY 40 PIN TFT (24 Bit data lines) Header including SPI and I2C on same header Audio Amplifier. Connected via DAC Out with 3.5mm audio jack. Pin Outs for GPIO including I2c, SPI, ADC etc Internal RTC with CMOS Battery (2032) Connectivity Options. On Board Power Supply for 5V and 3.3V Revision 1.0 5

6 2. HANDLING WARNINGS: The Kit must not be subjected to high electrostatic potentials. General practice for working with static sensitive devices should be followed when working with the Mio Board. Board must always be handled at properly designated work areas. When not being worked on, the board must be enclosed in the box and stored safely. Avoid touching the circuits or components. Stacking of circuit boards and assemblies should be avoided to prevent physical damage 3. KIT DELIVERABLES:. Graphical LCD (TM12864H6CCOWA) USB Cable. (AB) Adaptor 7.5v or 9V/1 amp DC CD that contains, KEIL evaluation version installer, Flash Magic Installer, schematics, user manual and related documents, hex files for experiments, Keil project and workspace for implementing various peripherals and few example project codes. 4. BOARD USE REQUIREMENTS: To test and evaluate the board, we recommend the following configurations PC with 2.0 GHz or higher CPU, 512 MB or above RAM, USB Port, Serial Port and Ethernet Port. (Will need a Parallel Port if a Parallel JTAG is being used) Operating System (We recommend Windows XP, since most of our testing is done on same platform, although other OS can also be used) Integrated Development Environment (We recommend Keil Other compatible IDE can be used) Debugging/Programming Tool (We recommend HJTAG, Colink-Ex, Other compatible tools can be used) To test all the features of the board, you would also require a USB Cable (A to B), USB Pen drive, Ethernet cable (straight), a Micro SD Card, If you also need to test the TFT, you will need a Mio Compatible TFT Display Boards provided by CoiNel. Revision 1.0 6

7 5. FUNCTIONAL BLOCK DIAGRAM OF LPC1788 Mio:. JTAG (20PIN) & SWD (10PIN) CONNECTORS 5V & 3V3 REGULATED POWER SUPPLY SECTION 40 PIN TFT CONNECTOR WITH 24 BIT DATA, SPI & I2C LINES. KWH070KQ13-F02 COMPATIBLE SD RAM 256Mbits x 2 MT48LC64M4A2 USBDEVICE1 /USBHOST1 & USB HOST2 SPI FLASH(64Mbits) -AT25df641 (OPTIONAL) MICRO SD CARD CONNECTOR (MCI) GRAPHICAL DISPLAY CONNECTOR. TM12864H6CCOWA COMPATIBLE ETHERNET RJ45 CONNECTOR LPC 1788 / LPC 2478/ LPC4088 TEST LED/BUZZER PS2 CONNECTOR UART0 & UART2 DB9 FEMALE CAN CONNECTOR DB9 MALE 3.5mm AUDIO JACK CONNECTOR DAC OUT WITH AMP INPUT SWITCHES- RST, ISP & 2 GENERAL INPUT ANALOG INPUT (POT) 2032 CMOS CELL CONNECTOR FOR RTC 12Mhz & Khz CRYSTALS PINOUT (SPI, I2C, GPIO,,ADC, DAC) Revision 1.0 7

8 6. BOARD LAYOUT: TOP VIEW Revision 1.0 8

9 BOTTOM VIEW Revision 1.0 9

10 7. HARDWARE RESOURCES: BOARD Connections The above figure shows the connectivity options available on. Revision

11 8. I/O CONNECTOR DESCRIPTION: The details of the IO connections are as follows 8.1. DC Power Input: The Power supply to be used has to be 7.5V to 9V DC, 1Amp. The DC jack connectivity details are shown in the figure. A slide switch is provided for power ON/OFF control. The slide switch is useful only when an external DC adapter is used. Note: Mio cannot be powered via USB When using the adapter, sliding the switch towards the arrow shown in figure will turn the board ON. Revision

12 8.2. JTAG 20 Pin Box Header: The box header will be used to connect the JTAG for Debug/Programming. A 20 Pin IO Cable can be connected here which connects from a Parallel/USB JTAG. For more details on JTAG, check 8.3. Micro SD Card Connector: The correct way of inserting the SD card is given below. The interface used for SDCard interface is MCI protocol. Pressing the card in the direction shown will lock the card once it will fully and properly inserted. Note: To remove the card, press the card gently in the same direction shown above and then letting it loose. The card will easily pop out and can be removed. Revision

13 8.4. Ethernet: The correct way to plug the connector is given in the figure. Press the connector in the direction shown and the connector will lock up properly when it is fully connected. An Ethernet straight through cable is used for testing. The recommended connection of the cable is also given. Revision

14 8.5. USB CONNECTIONS: The USB provided can either be used as a HOST or an End Device. The USB A Connector is used for the HOST interface, while USB B type for the end device. The jumper setting at J15 needs to be changed depending on whether the USB is used as a HOST or End Device. The details of connections are given below. Revision

15 8.6. Analog Input: 8.7. Reset and ISP Switch: These switches provided can be used for resetting the CPU and ISP (In system programming) mode. The details of programming the board in ISP mode is given in detail in programming section. Revision

16 8.8. Serial Ports: Onboard 2 Serial ports are provided i.e. UART0 & UART2. The signals are RS232 logic compatible, so it can be directly connected to Computer Serial Port. The UART0 can be used for ISP mode programming. The ISP mode programming detail is provided in programming section. Its printed in the back layer of the board which UART it is. Revision

17 8.9. Graphical LCD Connector: 128x64 Pixels Graphical display can be directly connected to this Port. The Compatible Graphical display is available at Revision

18 8.10. TFT 40 pin BOX Header: This connector can be used to connect different TFT (3.2inch, 3.5inch, 4.3inch and 7inch provided by CoiNel. The details of the TFT can be found at the company s website. The compatible TFT can be found at These TFT Displays are SPI based and parallel interface and options can be chosen accordingly. Check Schematic Section for more details Buzzer/Test LED (D1): A Buzzer/Test LED is connected at P2.21. There is a jumper (J9) to select between Buzzer or LED connectivity. Revision

19 10. ISP MODE PROGRAMMING: Software. You need to have LPC176x HPLUS EX Board, Serial cable, Desktop PC, Flash Magic Follow the Steps is below: Power ON LPC176x HPLUS EX Board. Connect Serial Cable Between UART0 of Module and PC. Enter into the ISP Programming mode by following procedure. Revision

20 Open Flash Magic Software in PC. Click on Options and goto Advance Options. In Advance Options Keep the Settings as shown below. Click on OK after making changes Revision

21 Keep the Settings as below in Flash Magic and Click on Start to program. COM Port may not be COM1 in every PC, Check it in Ports (COM & LPT) in Device Manager. If All the Settings are proper, the programming will be successful. Revision

LPC1788 Mio Board. The functional details of the board are as follows-

LPC1788 Mio Board. The functional details of the board are as follows- INTRODUCTION : The LPC1788 Mio is based on Cortex M3 Core, running at up to 120MHz. The Mio lets you quickly start with your development on LPC1788 based designs. The functional details of the board are

More information

LPC2148 DEV BOARD. User Manual.

LPC2148 DEV BOARD. User Manual. LPC2148 DEV BOARD User Manual www.coineltech.com www.coineltech.com Designed by CoiNel Technology Solutions LLP No-816, 2 nd Floor, 4 th B Cross, 9 th A Main, RPC Layout, Vijaynagar, Bangalore-560040 State:

More information

CoiNel Technology Solutions LLP. LPC2148 ARTIST Instruction Manual LPC2148 ARTIST. Instruction manual. Revision 1

CoiNel Technology Solutions LLP. LPC2148 ARTIST Instruction Manual LPC2148 ARTIST. Instruction manual.   Revision 1 LPC2148 ARTIST Instruction manual Designed by CoiNel Technology Solutions LLP No-816, 2 nd Floor, 4 th B Cross, 9 th A Main, RPC Layout, Vijaynagar, Bangalore-560040 State: Karnataka Country: India www.coineltech.com

More information

RX62N BOARD User Manual

RX62N BOARD User Manual RX62N BOARD User Manual www.coineltech.com 1 Designed by CoiNel Technology Solutions LLP No-32 (Old No - 1355), 2nd Floor, HAPBCO Tower, 9th Main, 4th B Cross, Hampinagar, RPC Layout Bangalore 560104 State:

More information

CMSIS DAP Setup. Document Version History Document Version ngxtechnologies.com 2

CMSIS DAP Setup. Document Version History Document Version ngxtechnologies.com 2 Document Version History Document Version - 1.0 Author Vinayak ngxtechnologies.com 2 Table of Contents INTRODUCTION...4 REQUIREMENTS...4 HARDWARE...4 SOFTWARE...4 SETUP...4 DISCLAIMERS...8 ngxtechnologies.com

More information

User Manual: LPC1830-Xplorer LPC1830-Xplorer

User Manual: LPC1830-Xplorer LPC1830-Xplorer LPC1830-Xplorer 1 www.ngxtechnologies.com About NGX Technologies NGX Technologies is a premier supplier of development tools for the ARM7, ARM Cortex M0, M3 and M4 series of microcontrollers. NGX provides

More information

STM32L4R9I-EVAL. Evaluation board with STM32L4R9AI MCU. Features

STM32L4R9I-EVAL. Evaluation board with STM32L4R9AI MCU. Features Evaluation board with STM32L4R9AI MCU Data brief Features STM32L4R9AII6 microcontroller with 2-Mbytes of Flash memory and 640-Kbytes of RAM in a UFBGA169 package 1.2 390x390 pixel MIPI DSI round LCD 4.3

More information

UM User Manual for LPC54018 IoT Module. Rev November Document information

UM User Manual for LPC54018 IoT Module. Rev November Document information UM11078 for Rev. 1.01 27 November 2017 Document information Info Content Keywords LPC54018, OM40007, GT1216, UM11078 Abstract Revision history Rev Date Description 1.0 20171122 First draft 1.01 20171127

More information

Ethernet1 Xplained Pro

Ethernet1 Xplained Pro Ethernet1 Xplained Pro Part Number: ATETHERNET1-XPRO The Atmel Ethernet1 Xplained Pro is an extension board to the Atmel Xplained Pro evaluation platform. The board enables the user to experiment with

More information

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions. Pepper 43R TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.

More information

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions. Pepper DVI TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.

More information

QT3 Xplained Pro. Preface. Atmel QTouch USER GUIDE

QT3 Xplained Pro. Preface. Atmel QTouch USER GUIDE Atmel QTouch QT3 Xplained Pro USER GUIDE Preface The Atmel QT3 Xplained Pro is an extension board, which enables the evaluation of a capacitive touch 12 key numpad in mutual capacitance configuration.

More information

FriendlyARM. Mini2440.

FriendlyARM. Mini2440. FriendlyARM Mini2440 www.friendlyarm.net 1 Introduction...3 1.1 Features...4 2 Hardware Resource...6 2.1 Jumpers and Interfaces...6 2.2 Memory Map...7 2.2.1 Memory Adress Allocation...7 2.3 Power Supply...8

More information

LPC-P1227 development board USER S MANUAL Revision B, July 2013 Designed by OLIMEX Ltd, 2011

LPC-P1227 development board USER S MANUAL Revision B, July 2013 Designed by OLIMEX Ltd, 2011 LPC-P1227 development board USER S MANUAL Revision B, July 2013 Designed by OLIMEX Ltd, 2011 All boards produced by Olimex LTD are ROHS compliant Disclaimer: 2013 Olimex Ltd. Olimex, logo and combinations

More information

BIG8051. Development system. User manual

BIG8051. Development system. User manual BIG8051 User manual All s development systems represent irreplaceable tools for programming and developing microcontroller-based devices. Carefully chosen components and the use of machines of the last

More information

Intel Galileo gen 2 Board

Intel Galileo gen 2 Board Intel Galileo gen 2 Board The Arduino Intel Galileo board is a microcontroller board based on the Intel Quark SoC X1000, a 32- bit Intel Pentium -class system on a chip (SoC). It is the first board based

More information

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions. Poblano 43C TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.

More information

STM32H7x3I-EVAL. Evaluation board with STM32H7x3XI MCUs. Data brief. Features

STM32H7x3I-EVAL. Evaluation board with STM32H7x3XI MCUs. Data brief. Features Data brief Evaluation board with STM32H7x3XI MCUs Features top view. Picture is not contractual. 2 top view. Picture is not contractual. Product status STM32H743I-EVAL STM32H753I-EVAL STM32H743XIH6U and

More information

QT2 Xplained Pro. Preface. Atmel QTouch USER GUIDE

QT2 Xplained Pro. Preface. Atmel QTouch USER GUIDE Atmel QTouch QT2 Xplained Pro USER GUIDE Preface Atmel QT2 Xplained Pro kit is an extension board that enables the evaluation of a mutual capacitance touch surface using the Peripheral Touch Controller

More information

Gumstix Pi Compute USB-Ethernet

Gumstix Pi Compute USB-Ethernet Gumstix Pi Compute USB-Ethernet TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special

More information

Table 1. RS232 Serial Adapter DEBUG Connector Pin Descriptions

Table 1. RS232 Serial Adapter DEBUG Connector Pin Descriptions RS232 SERIAL ADAPTER (EC2) USER S GUIDE 1. Contents The RS232 Serial Adapter (EC2) package contains the following items: RS232 Serial Adapter (RS232 to Debug Interface) 7 Ribbon Cable 2. RS232 Serial Adapter

More information

XDS220 Quick Start Guide

XDS220 Quick Start Guide XDS220 Quick Start Guide XDS220 1.0 SYSTEM REQUIREMENTS Cables 4 Adapters Quick Start Guide To operate the Spectrum Digital XDS220 JTAG Emulator with your system it needs to meet the following requirements:

More information

LPC-P1227 development board USER S MANUAL Initial release, March 2012 Designed by OLIMEX Ltd, 2011

LPC-P1227 development board USER S MANUAL Initial release, March 2012 Designed by OLIMEX Ltd, 2011 LPC-P1227 development board USER S MANUAL Initial release, March 2012 Designed by OLIMEX Ltd, 2011 All boards produced by Olimex LTD are ROHS compliant Disclaimer: 2012 Olimex Ltd. Olimex, logo and combinations

More information

The industrial technology is rapidly moving towards ARM based solutions. Keeping this in mind, we are providing a Embedded ARM Training Suite.

The industrial technology is rapidly moving towards ARM based solutions. Keeping this in mind, we are providing a Embedded ARM Training Suite. EMBEDDED ARM TRAINING SUITE ARM SUITE INCLUDES ARM 7 TRAINER KIT COMPILER AND DEBUGGER THROUGH JTAG INTERFACE PROJECT DEVELOPMENT SOLUTION FOR ARM 7 e-linux LAB FOR ARM 9 TRAINING PROGRAM INTRODUCTION

More information

UM LPC54018 IoT module. Document information. LPC54018, OM40007, Amazon FreeRTOS, AWS, GT1216 LPC54018 IoT module user manual

UM LPC54018 IoT module. Document information. LPC54018, OM40007, Amazon FreeRTOS, AWS, GT1216 LPC54018 IoT module user manual Rev. 1.2 20 March 2018 User manual Document information Info Content Keywords LPC54018, OM40007, Amazon FreeRTOS, AWS, GT1216 Abstract user manual Revision history Rev Date Description 1.0 20171206 Initial

More information

EX-9686U/A-L(A9) Hardware User Manual

EX-9686U/A-L(A9) Hardware User Manual EX-9686U/A-L(A9) Hardware User Manual Release Notes Version Release Date Notes 1.00 November, 2013 Initial Release 2.00 January, 2014 The 2 nd release Disclaimer This documentation is provided for use

More information

Introduction. Rev.1.2

Introduction. Rev.1.2 Introduction The Revelation board is an evaluation tool which is designed to help to start working with Riverdi TFT panels with FT8XX controllers. It can also be used as a platform to build your own application.

More information

Purchase Agreement. P&E Microcomputer Systems, Inc. P.O. Box 2044 Woburn, MA Manual version 1.

Purchase Agreement. P&E Microcomputer Systems, Inc. P.O. Box 2044 Woburn, MA Manual version 1. Purchase Agreement P&E Microcomputer Systems, Inc. reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. P&E Microcomputer Systems,

More information

Toradex Colibri Development Board

Toradex Colibri Development Board Toradex Colibri Development Board TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special

More information

USER GUIDE. Atmel OLED1 Xplained Pro. Preface

USER GUIDE. Atmel OLED1 Xplained Pro. Preface USER GUIDE Atmel OLED1 Xplained Pro Preface Atmel OLED1 Xplained Pro is an extension board to the Atmel Xplained Pro evaluation platform. The board enables the user to experiment with user interface applications

More information

TMS320C5502 ezdsp Quick Start Guide

TMS320C5502 ezdsp Quick Start Guide TMS320C5502 ezdsp Quick Start Guide C5502 ezdsp USB Cable DVD Quick Start Guide 1.0 SYSTEM REQUIREMENTS To operate the Spectrum Digital XDS100 JTAG Emulator with your system it needs to meet the following

More information

USER GUIDE. Atmel QT6 Xplained Pro. Preface

USER GUIDE. Atmel QT6 Xplained Pro. Preface USER GUIDE Atmel QT6 Xplained Pro Preface Atmel QT6 Xplained Pro kit is a Xplained Pro extension board that enables the evaluation of a mutual capacitance touch suface using the Peripheral Touch Controller

More information

OMAP-L138 experimenter Kit. QuickStart Guide O

OMAP-L138 experimenter Kit. QuickStart Guide   O OMAP-L138 :: :: O M QuickStart Guide www.logicpd.comz O QuickStart Guide We fast forward the evolution of new products. Table of Contents 1 Introduction 4 1.1 Scope of Document 4 1.2 Zoom OMAP-L138 Contents

More information

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions. Garret 50C TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.

More information

UM2255 User manual. SPC58NG-DISP user manual. Introduction

UM2255 User manual. SPC58NG-DISP user manual. Introduction User manual SPC58NG-DISP user manual Introduction The SPC58NG-DISP Discovery board is the hardware platform to evaluate and to develop applications with SPC58NG84E7 microcontroller at budget price. This

More information

PAC5523EVK1. Power Application Controllers. PAC5523EVK1 User s Guide. Copyright 2017 Active-Semi, Inc.

PAC5523EVK1. Power Application Controllers. PAC5523EVK1 User s Guide.   Copyright 2017 Active-Semi, Inc. PAC5523EVK1 Power Application Controllers PAC5523EVK1 User s Guide www.active-semi.com Copyright 2017 Active-Semi, Inc. CONTENTS Contents...2 Overview...3 PAC5523EVK1 Resources...5 Pinout and Signal Connectivity...5

More information

USER GUIDE. Atmel QT1 Xplained Pro. Preface

USER GUIDE. Atmel QT1 Xplained Pro. Preface USER GUIDE Atmel QT1 Xplained Pro Preface Atmel QT1 Xplained Pro kit is an extension board that enables evaluation of self- and mutual capacitance mode using the Peripheral Touch Controller (PTC) module.

More information

AVR-P development board Users Manual

AVR-P development board Users Manual AVR-P40-8515 development board Users Manual All boards produced by Olimex are ROHS compliant Revision A, January 2002 Copyright(c) 2009, OLIMEX Ltd, All rights reserved Page 1 INTRODUCTION: The AVR Microcontroller

More information

LPC185x-Xplorer++ Quick Start Guide: LPC185x-Xplorer++ User Manuals for LPC185x-Xplorer++: For KEIL MDK-ARM with ULINK2/ME: Click here

LPC185x-Xplorer++ Quick Start Guide: LPC185x-Xplorer++ User Manuals for LPC185x-Xplorer++: For KEIL MDK-ARM with ULINK2/ME: Click here LPC185x-Xplorer++ User Manuals for LPC185x-Xplorer++: For KEIL MDK-ARM with ULINK2/ME: Click here Sample projects for LPC185x-Xplorer++: For KEIL MDK-ARM: Click here USB Virtual Com INF file: Click here

More information

BV511 Hardware Guide ByVac ByVac Revision 1.0

BV511 Hardware Guide ByVac ByVac Revision 1.0 BV511 Hardware Guide ByVac ByVac 2007 www.byvac.co.uk Revision 1.0 ByVac 1 Copyright in this work is vested in ByVac and the document is issued in confidence for the purpose only for which it is supplied.

More information

SABRE for Automotive Infotainment Quick Start Guide. Smart Application Blueprint for Rapid Engineering Based on the i.mx 6 Series

SABRE for Automotive Infotainment Quick Start Guide. Smart Application Blueprint for Rapid Engineering Based on the i.mx 6 Series SABRE for Automotive Infotainment Quick Start Guide Smart Application Blueprint for Rapid Engineering Based on the i.mx 6 Series About SABRE Platform for Automotive Infotainment Based on the the i.mx 6

More information

TechNexion PICO SOM Expansion Board

TechNexion PICO SOM Expansion Board TechNexion PICO SOM Expansion Board TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special

More information

32F469IDISCOVERY. Discovery kit with STM32F469NI MCU. Features. Description

32F469IDISCOVERY. Discovery kit with STM32F469NI MCU. Features. Description 32F469IDISCOVERY Discovery kit with STM32F469NI MCU Data brief Features STM32F469NIH6 microcontroller featuring 2 Mbytes of Flash memory and 324 Kbytes of RAM in BGA216 package On-board ST-LINK/V2-1 SWD

More information

AC/DC Adapter. Figure 1. Hardware Setup

AC/DC Adapter. Figure 1. Hardware Setup C8051F12X DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F12x Development Kit contains the following items: C8051F120 Target Board Serial Adapter (RS232 to Target Board Debug Interface Protocol

More information

Future Designs, Inc. Your Development Partner LCD DEMO KITS

Future Designs, Inc. Your Development Partner   LCD DEMO KITS Future Designs, Inc. Your Development Partner www.teamfdi.com LCD DEMO KITS LCD DEMO Kit Family LCD-DEMO-KIT LCD-DEMO-SC LCD-DEMO-LPC2158 LCD-DEMO-Family Each kit uses a multiplexed 8 digit liquid crystal

More information

TMS320C5535 ezdsp Quick Start Guide

TMS320C5535 ezdsp Quick Start Guide TMS320C5535 ezdsp Quick Start Guide Micro SD Microphone/ C5535 ezdsp USB Cable Card Earphone DVD Quick Start Guide 1.0 SYSTEM REQUIREMENTS To operate the Spectrum Digital XDS100 JTAG Emulator with your

More information

ATZB-SAMR21-XPRO. Preface. SmartConnect USER GUIDE

ATZB-SAMR21-XPRO. Preface. SmartConnect USER GUIDE SmartConnect ATZB-SAMR21-XPRO USER GUIDE Preface This user guide facilitates how to get started with the Atmel ATZB-SAMR21- XPRO extension board. ATZB-SAMR21-XPRO is targeted for evaluating the features

More information

USER GUIDE. ATWINC1500 Xplained Pro. Preface

USER GUIDE. ATWINC1500 Xplained Pro. Preface USER GUIDE ATWINC1500 Xplained Pro Preface Atmel ATWINC1500 Xplained Pro is an extension board to the Atmel Xplained Pro evaluation platform. The extension board allows to evaluate the Atmel ATWINC1510/1500

More information

AC/DC. Adapter. Ribbon. Cable Serial. Serial. Adapter. Figure 1. Hardware Setup using an EC2 Serial Adapter

AC/DC. Adapter. Ribbon. Cable Serial. Serial. Adapter. Figure 1. Hardware Setup using an EC2 Serial Adapter C8051F32X DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F32x Development Kit contains the following items: C8051F320 Target Board C8051Fxxx Development Kit Quick-Start Guide C8051F32x Development

More information

User Manual For CP-JR ARM7 USB-LPC2148 / EXP

User Manual For CP-JR ARM7 USB-LPC2148 / EXP CP-JR ARM7 USB-LPC2148 / EXP 38 CR-JR ARM7 USB-LPC2148 which is a Board Microcontroller ARM7TDMI-S Core uses Microcontroller 16/32-Bit 64 Pin as Low Power type to be a permanent MCU on board and uses MCU

More information

LPC4357-EVB User Manual

LPC4357-EVB User Manual LPC4357-EVB User Manual Release:V1.1 Date 2013.01.06 Embest Info&Tech Co.,LTD. Sales &Marketing: sales.en@embedinfo.com 2000-2012@ Technical support: support.en@embedinfo.com Revision History Rev Date

More information

USER GUIDE. Atmel Segment LCD1 Xplained Pro. Preface

USER GUIDE. Atmel Segment LCD1 Xplained Pro. Preface USER GUIDE Atmel Segment LCD1 Xplained Pro Preface Atmel Segment LCD1 Xplained Pro is an extension board to the Atmel Xplained Pro evaluation platform. Segment LCD1 Xplained Pro is designed to kick-start

More information

Overo Conduit LoRa Gateway

Overo Conduit LoRa Gateway Overo Conduit LoRa Gateway Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential

More information

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions. Cobalt MC Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.

More information

QuickStart Guide O

QuickStart Guide   O :: AM1808 EVM :: O M QuickStart Guide www.logicpd.comz O QuickStart Guide We fast forward the evolution of new products. Table of Contents 1 Introduction 4 1.1 Scope of Document 4 1.2 Zoom AM1808 EVM

More information

Clicker 2 for Kinetis

Clicker 2 for Kinetis Page 1 of 6 Clicker 2 for Kinetis From MikroElektonika Documentation clicker 2 for Kinetis is a compact dev. kit with two mikrobus sockets for click board connectivity. You can use it to quickly build

More information

USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup using a USB Debug Adapter

USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup using a USB Debug Adapter C8051F38X DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F38x Development Kit contains the following items: C8051F380 Target Board C8051Fxxx Development Kit Quick-start Guide Silicon Laboratories

More information

CEC1702 clicker. a great idea is just a click away

CEC1702 clicker. a great idea is just a click away a great idea is just a click away CEC1702 clicker A compact development board with a mikrobus socket for click board connectivity and Microchip s CEC1702, a 32-bit ARM Cortex -M4 Processor Core, with strong

More information

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.

The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions. Arbor 70C TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.

More information

Quick Start Installation Guide

Quick Start Installation Guide XDS220 ISO USB/Ethernet CJTAG/JTAG Emulator Quick Start Installation Guide Items required for installation XDS220 ISO Emulator 4 Adapters 2 Cables 1.0 SYSTEM REQUIREMENTS 2 GB of free hard disk space Microsoft

More information

LPC2468 Industrial Reference Design Platform System Development Kit Version 1.2. August 2008

LPC2468 Industrial Reference Design Platform System Development Kit Version 1.2. August 2008 QuickStart Guide LPC2468 Industrial Reference Design Platform System Development Kit Version 1.2 August 2008 1.0 System Overview The LPC2468 Industrial Reference Design (IRD) is a platform targeted at

More information

RX110H. Motherboard Layout: Board Layout:

RX110H. Motherboard Layout: Board Layout: RX110H Intel Socket LGA1151 6th Generation Core i7/i5/i3 CPU uatx Motherboard Quick Installation Guide Version 1.00 http://www.bcmcom.com Inspect the Package: One RX110H Motherboard Two SATA Cable One

More information

AM3517 experimenter Kit. QuickStart Guide O

AM3517 experimenter Kit. QuickStart Guide  O AM3517 :: :: O M QuickStart Guide www.logicpd.comz O QuickStart Guide We fast forward the evolution of new products. Table of Contents 1 Introduction 4 1.1 Scope of Document 4 1.2 Zoom AM3517 Contents

More information

USER GUIDE. Atmel maxtouch Xplained Pro. Preface

USER GUIDE. Atmel maxtouch Xplained Pro. Preface USER GUIDE Atmel maxtouch Xplained Pro Preface Atmel maxtouch Xplained Pro is an extension board to the Atmel Xplained Pro evaluation platform. The board enables the user to experiment with user interface

More information

AVR-P20 development board Users Manual

AVR-P20 development board Users Manual AVR-P20 development board Users Manual All boards produced by Olimex are ROHS compliant Revision A, October 2005 Copyright(c) 2009, OLIMEX Ltd, All rights reserved Page 1 INTRODUCTION: The AVR Microcontrollers

More information

LPC1768 Industrial Reference Design Platform System Development Kit Version 1.3. May 2009

LPC1768 Industrial Reference Design Platform System Development Kit Version 1.3. May 2009 QuickStart Guide LPC1768 Industrial Reference Design Platform System Development Kit Version 1.3 May 2009 1.0 System Overview The LPC1768 Industrial Reference Design (IRD) is a platform targeted at RTOS

More information

Atmel AVR ATxmega384C3 microcontroller OLED display with 128x32 pixels resolution Analog sensors. Ambient light sensor Temperature sensor

Atmel AVR ATxmega384C3 microcontroller OLED display with 128x32 pixels resolution Analog sensors. Ambient light sensor Temperature sensor APPLICATION NOTE Atmel AVR1939: XMEGA-C3 Xplained Getting Started Guide Features Atmel AVR ATxmega384C3 microcontroller OLED display with 128x32 pixels resolution Analog sensors Ambient light sensor Temperature

More information

USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup using a USB Debug Adapter

USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup using a USB Debug Adapter C8051F2XX DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F2xx Development Kits contain the following items: C8051F206 or C8051F226 Target Board C8051Fxxx Development Kit Quick-Start Guide Silicon

More information

FM3. MB9B500 Series 32-BIT MICROCONTROLLER FSS MB9BF506R EV-BOARD USER MANUAL APPLICATION NOTE FUJITSU SEMICONDUCTOR (SHANGHAI) LIMITED

FM3. MB9B500 Series 32-BIT MICROCONTROLLER FSS MB9BF506R EV-BOARD USER MANUAL APPLICATION NOTE FUJITSU SEMICONDUCTOR (SHANGHAI) LIMITED MCU-AN-510014-E-10 FM3 32-BIT MICROCONTROLLER MB9B500 Series FSS MB9BF506R EV-BOARD USER MANUAL APPLICATION NOTE For more information for the FM3 microcontroller, visit the web site at: http://www.fujitsu.com/global/services/microelectronics/product/micom/roadmap/industrial/fm3/

More information

MYD-IMX28X Development Board

MYD-IMX28X Development Board MYD-IMX28X Development Board MYC-IMX28X CPU Module as Controller Board Two 1.27mm pitch 80-pin SMT Male Connectors for Board-to-Board Connections 454MHz Freescale i.mx28 Series ARM926EJ-S Processors 128MB

More information

Purchase Agreement. P&E Microcomputer Systems, Inc. P.O. Box 2044 Woburn, MA Manual version 1.

Purchase Agreement. P&E Microcomputer Systems, Inc. P.O. Box 2044 Woburn, MA Manual version 1. Purchase Agreement P&E Microcomputer Systems, Inc. reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. P&E Microcomputer Systems,

More information

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. Products and specifications discussed

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. Products and specifications discussed SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. Products and specifications discussed herein are for reference purposes only. All information discussed

More information

DPN-4 Duo. User Manual. 4-Port Dual-Head Displayport KVM switch with USB 2.0 and Audio Sharing

DPN-4 Duo. User Manual. 4-Port Dual-Head Displayport KVM switch with USB 2.0 and Audio Sharing DPN-4 Duo User Manual 4-Port Dual-Head Displayport KVM switch with USB 2.0 and Audio Sharing Access & Control up to 4 Computers from a single Workstation Made in U.S.A. www.smartavi.com 1 1-800-AVI-2131

More information

STM3220G-SK/KEI. Keil starter kit for STM32F2 series microcontrollers (STM32F207IG MCU) Features. Description

STM3220G-SK/KEI. Keil starter kit for STM32F2 series microcontrollers (STM32F207IG MCU) Features. Description Keil starter kit for STM32F2 series microcontrollers (STM32F207IG MCU) Data brief Features The Keil MDK-Lite development tools: µvision 4 IDE/Debugger for application programming and debugging ARM C/C++

More information

TEOS Hardware System TEOS 8416 / TEOS 1016/ TEOS1216

TEOS Hardware System TEOS 8416 / TEOS 1016/ TEOS1216 TEOS Hardware System TEOS 8416 / TEOS 1016/ TEOS1216 Revision v1.1 November 2011 Copyright 2009~2011 All Rights Reserved Manual Version 1.1 The information contained in this document is subject to change

More information

32F412GDISCOVERY. Discovery kit with STM32F412ZG MCU. Features. Description

32F412GDISCOVERY. Discovery kit with STM32F412ZG MCU. Features. Description Discovery kit with STM32F412ZG MCU Data brief Features STM32F412ZGT6 microcontroller featuring 1 Mbyte of Flash memory and 256 Kbytes of RAM in an LQFP144 package On-board ST-LINK/V2-1 SWD debugger supporting

More information

Freedom FRDM-KV31F Development Platform User s Guide

Freedom FRDM-KV31F Development Platform User s Guide Freescale Semiconductor, Inc. Document Number: FRDMKV31FUG User's Guide 0, 02/2016 Freedom FRDM-KV31F Development Platform User s Guide 1. Introduction The Freedom development platform is a set of software

More information

AC/DC. Adapter. Serial. Adapter. Figure 1. Hardware Setup

AC/DC. Adapter. Serial. Adapter. Figure 1. Hardware Setup C8051F35X DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F35x Development Kit contains the following items: C8051F350 Target Board Serial Adapter (RS232 to Target Board Debug Interface Protocol

More information

ATtiny104 Xplained Nano. Preface. AVR 8-bit Microcontrollers USER GUIDE

ATtiny104 Xplained Nano. Preface. AVR 8-bit Microcontrollers USER GUIDE AVR 8-bit Microcontrollers ATtiny104 Xplained Nano USER GUIDE Preface The Atmel ATtiny104 Xplained Nano evaluation kit is a hardware platform to evaluate the ATtiny104 microcontroller. Supported by the

More information

APPLICATION NOTE. Atmel QT4 Xplained Pro User Guide ATAN0114. Preface

APPLICATION NOTE. Atmel QT4 Xplained Pro User Guide ATAN0114. Preface APPLICATION NOTE Atmel QT4 Xplained Pro User Guide ATAN0114 Preface Atmel QT4 Xplained Pro kit is an extension board that enables evaluation of self-capacitance mode proximity and touch using the peripheral

More information

RDB1768 Development Board User Manual

RDB1768 Development Board User Manual RDB1768 Development Board User Manual 6/16/2009 Rev.2 Copyright Code Red Technologies Inc. 2009 Page 1 of 18 1 OVERVIEW 3 1.1 LPC1768 Features 3 1.2 RDB1768 Evaluation Board Hardware 3 2 COMPONENTS 5 2.1

More information

MYD-SAMA5D3X Development Board

MYD-SAMA5D3X Development Board MYD-SAMA5D3X Development Board MYC-SAMA5D3X CPU Module as Controller Board DDR2 SO-DIMM 200-pin Signals Consistent with Atmel's Official Board 536MHz Atmel SAMA5D3 Series ARM Cortex-A5 Processors 512MB

More information

OK335xS Users Manual Part I - Introduction

OK335xS Users Manual Part I - Introduction OK335xS Users Manual Part I - Introduction Copyright@2013-2014 http://www.arm9board.net COPYRIGHT STATEMENT Contents (content being images, text, programs and scripts) of this manual is copyright Witech

More information

CUWIN. Hardware Manual (3200A, 3500A, 4300A) [Version 2.0]

CUWIN. Hardware Manual (3200A, 3500A, 4300A) [Version 2.0] CUWIN Hardware Manual (3200A, 3500A, 4300A) [Version 2.0] 1. Hardware Specification ITEM MCU Memory MODEL CUWIN3200A CUWIN3500A CUWIN4300A 32Bit RISC CPU(ARM920T Core) 266MHz SDRAM : 64MB (OS Image: 32MB

More information

VK5100-imx6 Development Platform Quick Start Guide

VK5100-imx6 Development Platform Quick Start Guide VK5100-imx6 Development Platform Quick Start Guide VEST-VK5100-QSG-001 Copyright 2016 Advanced Products Corporation Pte Ltd. All rights reserved. No part of this document may be photocopied, reproduced,

More information

USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup using a USB Debug Adapter

USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup using a USB Debug Adapter C8051F35X-DK DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F35x-DK Development Kit contains the following items: C8051F350 Target Board C8051Fxxx Development Kit Quick-Start Guide AC to DC Power

More information

The USB Debug Adapter package contains the following items: USB Debug Adapter (USB to Debug Interface) with attached 7 Ribbon Cable

The USB Debug Adapter package contains the following items: USB Debug Adapter (USB to Debug Interface) with attached 7 Ribbon Cable USB DEBUG ADAPTER USER S GUIDE 1. Contents The USB Debug Adapter package contains the following items: USB Debug Adapter (USB to Debug Interface) with attached 7 Ribbon Cable 2. USB Debug Adapter Specifications

More information

MIMXRT1020 EVK Board Hardware User s Guide

MIMXRT1020 EVK Board Hardware User s Guide NXP Semiconductors Document Number: MIMXRT1020EVKHUG User's Guide Rev. 0, 05/2018 MIMXRT1020 EVK Board Hardware User s Guide 1. Introduction This Hardware User s Guide for the MIMXRT1020 Evaluation Kit

More information

Atmel AVR1926: XMEGA-B1 Xplained Getting Started Guide. 8-bit Atmel Microcontrollers. Application Note. Features. 1 Introduction

Atmel AVR1926: XMEGA-B1 Xplained Getting Started Guide. 8-bit Atmel Microcontrollers. Application Note. Features. 1 Introduction Atmel AVR1926: XMEGA-B1 Xplained Getting Started Guide Features Easy to reprogram with just a USB cable and a preprogrammed boot loader Easy to debug code with PDI-based debugger/emulator Can be used with

More information

USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup Using a USB Debug Adapter

USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup Using a USB Debug Adapter C8051F33X DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F33x Development Kit contains the following items: C8051F330 Target Board C8051Fxxx Development Kit Quick-Start Guide AC to DC Power Adapter

More information

Figure 1. Proper Method of Holding the ToolStick. Figure 2. Improper Method of Holding the ToolStick

Figure 1. Proper Method of Holding the ToolStick. Figure 2. Improper Method of Holding the ToolStick TOOLSTICK UNIVERSITY DAUGHTER CARD USER S GUIDE 1. Handling Recommendations To enable development, the ToolStick Base Adapter and daughter cards are distributed without any protective plastics. To prevent

More information

LeopardBoard Hardware Guide Rev. 1.0

LeopardBoard Hardware Guide Rev. 1.0 LeopardBoard with VGA Camera Board LeopardBoard Hardware Guide Rev. 1.0 April 5, 2009 Page 1 LeopardBoard.org provides the enclosed product(s) under the following conditions: This evaluation kit is intended

More information

UM LPC General Purpose Shield (OM13082) Rev November Document information. Keywords

UM LPC General Purpose Shield (OM13082) Rev November Document information. Keywords Rev. 1.0 17 November 2015 User manual Document information Info Content Keywords LPCXpresso, LPC General Purpose Shield, OM13082 Abstract LPC General Purpose Shield User Manual Revision history Rev Date

More information

OM13071 LPCXpresso824-MAX Development board

OM13071 LPCXpresso824-MAX Development board LPCXpresso824-MAX Development board Rev. 1 29 September 2014 User manual Document information Info Content Keywords, LPC82x, development board, mbed, arduino Abstract This user manual describes the LPCXpresso824-MAX

More information

LPC-H1343 development board Users Manual

LPC-H1343 development board Users Manual LPC-H343 development board Users Manual All boards produced by Olimex are ROHS compliant Revision B, June 0 Copyright(c) 0, OLIMEX Ltd, All rights reserved Page INTRODUCTION LPC-H343 is header board with

More information

January 2003 Digital Audio Products SLEU031

January 2003 Digital Audio Products SLEU031 User s Guide January 2003 Digital Audio Products SLEU031 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,

More information

No: SW1.12_4.0.2 V F

No: SW1.12_4.0.2 V F Jupiter-F 2 User s Manual 2010 Navman Wireless OEM. All Rights Reserved. SiRF and SiRF logo are registered trademarks of SiRF Technology, Inc. SiRFstar, SiRFLoc, Push-to-Fix, and Trickle-Power are trademarks

More information

TD1205 / 1205P. TD1205 /1205P EVK Rev 1.1 User s Guide EVALUATION KIT USER S GUIDE FOR TDnext TD1205 / 1205P MODULE

TD1205 / 1205P. TD1205 /1205P EVK Rev 1.1 User s Guide EVALUATION KIT USER S GUIDE FOR TDnext TD1205 / 1205P MODULE EVALUATION KIT USER S GUIDE FOR TDnext TD1205 / 1205P MODULE July 2016 - Rev 1.1 rfmodules.td-next.com Page 1 Disclaimer: The information in this document is provided in connection with Telecom Design

More information

USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup Using a USB Debug Adapter

USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup Using a USB Debug Adapter C8051F31X DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The Development Kit contains the following items: C8051F310 Target Board C8051Fxxx Development Kit Quick-Start Guide AC to DC Power Adapter USB Debug

More information

Purchase Agreement. P&E Microcomputer Systems, Inc. 98 Galen St. Watertown, MA

Purchase Agreement. P&E Microcomputer Systems, Inc. 98 Galen St. Watertown, MA Purchase Agreement P&E Microcomputer Systems, Inc. reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. P&E Microcomputer Systems,

More information