QUINT-PS/24DC/48DC/ 5

Transcription

1 Extract from the online catalog QUINT-PS/24DC/48DC/ 5 Order No.: QUINT DC/DC converter, primary-switched, input: 24 V DC, output: 48 V DC/5 A Commercial data GTIN (EAN) sales group Pack Catalog page information H053 1 pcs. Page 609 (IF-2011) Product notes WEEE/RoHS-compliant since: 12/19/ Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Product description The QUINT 48 V/5 A DC/DC converter converts a DC voltage of 18 V V to an adjustable, regulated, and electrically isolated 48 V output voltage. If no regulated and stable 48 V DC voltage is available to supply a load, the DC/DC converter ensures the adjustment of the 48 V load: from an unregulated DC voltage, an adjustable output voltage of 30 V V is generated. PHOENIX CONTACT Deutschland GmbH Page 1 / 6

2 Technical data Input data Nominal input voltage DC input voltage range DC frequency range Current consumption Inrush surge current Power failure bypass Input fuse Permissible backup fuse Type of protection Protective circuit/component 24 V DC 18 V DC V DC (Derating < 18 V: UOut - 5%/V, IOut - 2.5/V) 0 Hz Typ. 14 A (24 V DC) < 15 A (typical) > 12 ms (24 V DC) 25 A (internal (device protection)) B16 Transient surge protection Varistor Output data Nominal output voltage 48 V DC ±1% Setting range of the output voltage 30 V DC V DC (> 48 V constant capacity) Output current 5 A (-25 C C) 6.25 A 30 A () Magnetic fuse tripping C2 Derating 60 C C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series Yes Max. capacitive load Unlimited Current limitation Approx. 18 A Control deviation < 1 % (change in load, static 10%... 90%) < 2 % (change in load, dynamic 10%... 90%) < 0.1 % (change in input voltage ±10%) Residual ripple < 20 mv PP Peak switching voltages nominal load Maximum power dissipation idling Power loss nominal load max. < 10 mv PP (20 MHz) 4.3 W 19.3 W General data Width Height 48 mm 130 mm PHOENIX CONTACT Deutschland GmbH Page 2 / 6

3 Depth Width with alternative assembly Height with alternative assembly Net weight 125 mm 122 mm 130 mm 51 mm 0.9 kg Efficiency > 92.5 % Insulation voltage input/output Degree of protection Protection class MTBF (IEC 61709, SN 29500) Ambient temperature (operation) 1 kv (routine test) 1.5 kv (type test) IP20 III > h Ambient temperature (storage/transport) -40 C C Max. permissible relative humidity (operation) -25 C C (> 60 C derating) 95 % (at 25 C, no condensation) Mounting position horizontal DIN rail NS 35, EN Assembly instructions Electromagnetic compatibility Standard Electrical equipment of machines EN Standard - Safety of transformers EN Standard - Electrical safety Standard Electronic equipment for use in electrical power installations and their assembly into electrical power installations Standard Safety extra-low voltage Can be aligned: Horizontal 0 cm, vertical 5 cm Conformance with EMC Directive 2004/108/EC EN /VDE 0805 (SELV) EN 50178/VDE 0160 (PELV) EN (SELV) EN (PELV) Standard - Safe isolation DIN VDE Standard Protection against shock currents, basic requirements for protective separation in electrical equipment DIN VDE DIN VDE UL approvals UL/C-UL listed UL 508 UL/C-UL Recognized UL Connection data, input Connection method Pluggable screw connection PHOENIX CONTACT Deutschland GmbH Page 3 / 6

4 Stripping length 7 mm Screw thread M3 Connection data, output Connection method Pluggable screw connection Stripping length 7 mm Signaling Output name Output description DC OK active U OUT > 21.5 V: High signal Status display "DC OK" LED green Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Screw thread M3 Output name DC OK floating Output description U OUT > 21.5 V: Contact closed Type of signaling LED, active switching output, relay contact PHOENIX CONTACT Deutschland GmbH Page 4 / 6

5 Certificates / Approvals Certification CB, CUL, CUL Listed, UL, UL Listed Diagrams/Drawings Block diagram PHOENIX CONTACT Deutschland GmbH Page 5 / 6