Draka Black Universal central tube cable 1000N central tube cable w 2 24 fibres, glass elements and black FireBur sheath, VDE U-DQ(ZN)BH Application a
|
|
|
- Monica Hunt
- 5 years ago
- Views:
Transcription
1 1000N central tube cable w 2 2 fibres, glass elements and black FireBur sheath, VDE UDQ(ZN)BH Application and installation This cable can be used for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections as well as fibre to the home drop and access connections. With its FireBur LSHF sheathing this cable is ideal for mixed indoor and outdoor installation. It is equally suited for installation in ducts and on trays. Standards ISO nd edition, EN :2002, IEC 0791 Flame resistance IEC , IEC 0751, IEC 0752, IEC 1032 Construction Loose tube Ø2.8 mm jelly filled loose tube with 2 1 fibres; Ø3.5 mm loose tube with 2 fibres Fibre colour code 1 Red 13 Yellow w/mark every 70 mm 2 Green 3 Blue Yellow 5 White Grey 7 Brown 8 Violet 9 Turquoise 10 Black 11 Orange 12 Pink 1 White w/mark every 70 mm 15 Grey w/mark every 70 mm 1 Turquoise w/mark every 70 mm 17 Orange w/mark every 70 mm 18 Pink w/mark every 70 mm 19 Yellow w/mark every 35 mm 20 White w/mark every 35 mm 21 Grey w/mark every 35 mm 22 Turquoise w/mark every 35 mm 23 Orange w/mark every 35 mm 2 Pink w/mark every 35 mm 1 of 3
2 Strength member Waterblocked EGlass fibre elements Sheath 1.0 mm black FireBur sheath, UV stabilised, IEC Sheath marking Draka I/O CT LSHF 1.0 kn <Fibre count> <Fibre type><fibre brand><item No>05<Batch Number><Meter mark> UDQ(ZN)BH <Fibre count> <Fibre family> <Mode field diameter> /125 <Transmission Class> Physical properties Nominal outer diameter Nominal weight Maximum installation tensile strength Short term tensile strength Permanent tensile strength Compressive strength (crush) Impact IEC Method E3 E Limits 2 1 fibres:.0 mm 18 2 fibres:.5 mm 2 1 fibres: 0 kg/km 18 2 fibres: 5 kg/km 1000 N (fibre strain less than 1/2 of proof test level) 750 N (fibre strain less than 1/3 of proof test level) 500 N (no attenuation change, fibre strain less than 1/ of proof test level) 1500 N 15 Nm (no attenuation change, no broken cable elements) Torsion Kink Min. bending radius, unloaded Min. bending radius, loaded Temperature range Water penetration E7 0 1 F1 F5B 5 cycles ± 1 turn The cables do not form a kink when a loop is drawn together to a diameter of 100 mm R = 0 mm R = 100 mm Storage: 0 C to +0 C Installation: 30 C to +0 C Operation: 30 C to +0 C. No water on free end Heat of combustion 21 fibres: 30 MJ/km = 0.18 kwh/m 2 fibres: 800 MJ/km = 0.22 kwh/km Product codes ordering information Prysmian Prysmian Group Draka Fibre Fibre type Fibre group material description Material count data material code sheet code DR I/O CT LSHF 1.0kN OM2B BK DR I/O CT LSHF 1.0kN OM2B BK DR I/O CT LSHF 1.0kN 8 OM2B BK DR I/O CT LSHF 1.0kN 12 OM2B BK DR I/O CT LSHF 1.0kN 2 OM2B BK MaxCapBBOM2 50/125 multi mode MaxCapBBOM2 50/125 multi mode MaxCapBBOM2 50/125 multi mode MaxCapBBOM2 50/125 multi mode MaxCapBBOM2 50/125 multi mode C3 C3 C3 C3 C DR I/O CT LSHF 1.0kN OM3B BK DR I/O CT LSHF 1.0kN OM3B BK MaxCapBBOM3 50/125 multi mode MaxCapBBOM3 50/125 multi mode C31 C DR I/O CT LSHF 1.0kN 8 OM3B BK 8 MaxCapBBOM3 50/125 multi mode C DR I/O CT LSHF 1.0kN 12 OM3B BK 12 MaxCapBBOM3 50/125 multi mode C DR I/O CT LSHF 1.0kN 2 OM3B BK 2 MaxCapBBOM3 50/125 multi mode C DR I/O CT LSHF 1.0kN OMB BK DR I/O CT LSHF 1.0kN OMB BK DR I/O CT LSHF 1.0kN 12 OMB BK 12 MaxCapBBOM 50/125 multi mode MaxCapBBOM 50/125 multi mode MaxCapBBOM 50/125 multi mode of 3
3 DR I/O CT LSHF 1.0kN 2 OMB BK 2 MaxCapBBOM 50/125 multi mode DR I/O CT LSHF 1.0kN MM1 BK OM1 2.5/125 multi mode C02 DR I/O CT LSHF 1.0kN MM1 BK OM1 2.5/125 multi mode C02 DR I/O CT LSHF 1.0kN 8 MM1 BK 8 OM1 2.5/125 multi mode C02 DR I/O CT LSHF 1.0kN 12 MM1 BK 12 OM1 2.5/125 multi mode C02 DR I/O CT LSHF 1.0kN 2 MM1 BK 2 OM1 2.5/125 multi mode C DR I/O CT LSHF 1.0kN SM2D BK OS2 Single mode G52.D C03e DR I/O CT LSHF 1.0kN SM2D BK OS2 Single mode G52.D C03e DR I/O CT LSHF 1.0kN 8 SM2D BK 8 OS2 Single mode G52.D C03e DR I/O CT LSHF 1.0kN 12 SM2D BK 12 OS2 Single mode G52.D C03e DR I/O CT LSHF 1.0kN 2 SM2D BK 2 OS2 Single mode G52.D C03e DR I/O CT LSHF 1.0kN SM2D BK BendBright XS G.57.A2 C2 DR I/O CT LSHF 1.0kN SM2D BK BendBright XS G.57.A2 C2 PRYSMIAN GROUP 2010, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group. 3 of 3
4 C02: General purpose 2.5 µm fibre Properties of cabled OM1 fibre for use at 850 nm and at 1300 nm General and application This fibre is a gradedindex multimode fibre suitable for transmission speeds of up to 10 Gb/s (33m 10GBASESX). It has a 2.5 µm core diameter and a 125 µm cladding diameter. The fibre is designed for use at 850 and/or 1300 nm. This fibre is suitable for use in premises wiring application like LAN s with video, data and or voice services using LED, VCSEL and FabryPerot laser sources. Standards IEC Category A1b ISO/IEC category OM1. EN : type A1b IEEE with amendment 802.3ae TIA/EIA92 AAAA ANSI/TIA/EIA58.B EN :2007 category OM1 IBM Fibre Optic Channel Links; ESCON Optical properties Attenuation limit according to IEC , 850 nm IEC db/km 3.5 Attenuation limit according to IEC , 1300 nm IEC db/km 1.5 Inhomogeneity of OTDR trace for any two 1000 metre fibre IEC Max. 0.1 db/km lengths Cable attenuation Maximum attenuation value of cable at 850 nm IEC db/km 3.2 Maximum attenuation value of cable at 1300 nm IEC db/km 1.0 Bandwidth Overfilled (OFL) modal bandwidth at 850 nm IEC MHz km 200 Overfilled (OFL) modal bandwidth at 1300 nm IEC MHz km 00 Effective Modal Bandwidth (EMB) at 850 nm IEC MHz km Group index of refraction Group index of refraction at 850 nm IEC Group index of refraction at 1300 nm IEC C02_e Version Page 1 of 2
5 C02: General purpose 2.5 µm fibre Geometrical properties Core diameter IEC µm 2.5 ± 2.5 Cladding diameter IEC µm ± 1.0 Cladding noncircularity IEC % 1.0 Core noncircularity IEC % 5 Corecladding concentricity error IEC µm 1.5 Primary coating diameter uncoloured IEC µm 22 ± 7 Primary coating diameter coloured IEC µm 250 ± 15 Primary coating noncircularity IEC % 5 Primary coatingcladding concentricity error IEC µm Mechanical properties Proof stress level IEC GPa 0.7 ( 1 %) Typical average strip force IEC N 1.7 Strip force (peak) IEC N 1.3 F peak.strip 8.9 PRYSMIAN GROUP 2012, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group. C02_e Version Page 2 of 2
Strength member Waterblocked EGlass fibre elements Sheath 1.0 mm black FireBur sheath, UV stabilised, IEC Sheath marking Draka I/O CT LSHF 1.
1000N central tube cable w 2 2 fibres, glass elements and black FireBur sheath, VDE UDQ(ZN)BH Application and installation This cable can be used for LAN and WAN backbones, telecom access lines, fibre
Data sheet PM PCC OpDAT patch cord LC-D/LC-D OM3 aqua, 20.0 m
Illustrations Dimensional drawing Page 1/5 See enlarged drawings at the end of document Product specification patch cord for the METZ CONNECT Patch Management System multi mode patch cord I-V(ZN)H 50/125
EDGE Solutions Trunk Cable, OM4, Low- Loss, MTP to MTP, 12 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
Structured (premises) wiring systems: building backbone (riser) and/or horizontal cabling.
GIBT Breakout Cables Indoor I-V(ZN)HH 05-0- v6.0 Ordering Information Belden Part Numbers Fibre Description / count 4 6 8 4 6.5/5-OM GIBT0 GIBT04 GIBT06 GIBT08 GIBT GIBT4 50/5-OM BI GIBT0 GIBT04 GIBT06
Pretium EDGE Solutions Trunk Cable, OM3, Low-Loss, MTP to MTP, 24 fibres
Corning LANscape Pretium EDGE (Evolved-Density, Growth -Enabled) solutions are high -density preterminated optical cabling systems that simplify installation and improve performance in data centre environments.
EDGE8 MTP Trunk Cable
The EDGE8 trunks utilise 8 -fibre push/pull optical connectors that are pinned on both ends of the cable. The trunks are shipped with strain -relief clips that allow for tool -less installation in EDGE8
SUMITOMO SPECIFICATION. FutureFLEX. Multimode 62.5 µm Core Optical Fiber (OM1) Gigabit Grade
SUMITOMO SPECIFICATION FutureFLEX Multimode 62.5 µm Core Optical Fiber (OM1) Gigabit Grade SUMITOMO ELECTRIC LIGHTWAVE CORP. 201 South Rogers Lane, Suite 100, Raleigh, NC 27610 (919) 541-8100 or 1-800-358-7378
Outside Plant. LMJ - Large Multi-Function Joint. Features and Benefits. Prysmian Part Number: See Following Pages. Kit Contents.
- Large Multi-Function Joint Prysmian Part Number: See Following Pages The is used for access applications within the external optical network and can be used for track, spur and loop applications. It
Indoor Cable Application Note
Application Notes Indoor Cable Application Note Issued November 2013 Abstract With the fast development of fiber optic communication technology and the trend of FTTX, indoor fiber optic cables are more
Pretium EDGE Solutions Trunk Cable, OM4, Low-Loss, MTP to MTP, 24 fibres
Corning Cable 143 Pretium EDGE Solutions Trunk Cable, OM4, Corning Cable Systems LANscape Pretium EDGE (Evolved -Density, Growth -Enabled) Solutions are high density pre -terminated optical cabling systems
Multi-Fibre Loose Tube Cable Assemblies
Multi-Fibre Cable Assemblies Loose tube multi-fibre pre-terminated assemblies designed and manufactured with a variety of standard optical and connectors. With a core count up to 144 fibres using 900um
MTP Outdoor Cabling System
The AFL MTPE (MTP Elite) Low Loss outdoor cabling system offers a market leading, low loss, fast and efficient connection system for underground (UG) and outside plant applications. These assemblies offer
Sumitomo Fiber Specification SE-7** Non-Zero Dispersion Shifted Single-Mode Fiber. PureMetro SM Optical Fiber, TIA Type Ivd, ITU-T G.
Sumitomo Fiber Specification SE-7** Non-Zero Dispersion Shifted Single-Mode Fiber PureMetro SM Optical Fiber, TIA Type Ivd, ITU-T G.655 Issued: January 2006 CONTENTS 78 Alexander Drive, Research Triangle
Pre-terminated Multi Fibre Cable Assemblies
AFL manufactures a broad range of factory terminated and tested multi-fibre cable assemblies. These assemblies are available in various fibre types and counts, cable constructions and connector options.
EDGE Solutions Hybrid Trunk, OM4, Low- Loss, MTP to LC Duplex Uniboot, 24 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
Plug & Play Universal Harness, SMF-28 Ultra Single-mode (OS2)
Plug & Play Universal Systems Harnesses have a pinned (male) MTP connector on one end that connects to a Plug & Play Universal Systems trunk or extender trunk, while the other end is equipped with single
barpa Values Website & Social Network
barpa Hello! Welcome to our world. Have you heard about us? We are specialized in structured cabling systems for data networks. We are able to give you the full range, from cable to cabinets, fiber optic
Outside Plant. LMJ - Large Multi-Function Joint. Features and Benefits. Prysmian Part Number: See Following Pages. Kit Contents.
- Large Multi-Function Joint Prysmian Part Number: See Following Pages The is used for access applications within the external optical network and can be used for track, spur and loop applications. It
Pretium EDGE Solutions Trunk Cable, 50 µm multimode (OM3)
Pretium EDGE 133 Pretium EDGE Solutions Trunk Cable, 50 Pretium EDGE Solutions trunk cables utilize the MTP Connector, a 12 -fiber push/pull optical connector with a footprint similar to the SC simplex
OPTICAL FIBER INTRODUCTION
OPTICAL FIBER INTRODUCTION Advantages of optical fiber as compared to copper cables are known. They feature a very high degree of isolation, as they are immune to crosstalk, electromagnetic interference
Sumitomo Fiber Specification SE-5** PureBand Single-Mode Fiber. Zero Water Peak (ZWP) Attenuation Optical Fiber, ITU G.
Sumitomo Fiber Specification SE-5** PureBand Single-Mode Fiber Zero Water Peak (ZWP) Attenuation Optical Fiber, ITU G.652D TIA Type IVa Issued: March 2009 78 Alexander Drive, Research Triangle Park, NC
Fiber Optical Cabling Infrastructure Offer
Fiber Optical Cabling Infrastructure Offer Zipcord Subunitized Armored Subunitized In/outdoor Armored In/outdoor Stranded Loose Tube High-Speed Fiber Cabling Systems FS.COM offers an extensive line of
Outside Plant. LMJ - Large Multi-Function Joint. Features and Benefits. Prysmian Part Number: See Following Pages. Kit Contents.
- Large Multi-Function Joint Prysmian Part Number: See Following Pages The is used for access applications within the external optical network and can be used for track, spur and loop applications. It
Plug & Play Universal Trunks
1 1 22.88 115 0 Plug & Play 0 Plug & Play Universal Trunks Plug & Play Universal Systems MTP Trunks provide the backbone of the Plug & Play System. With non - pinned MTPs on both ends of the cable, these
Fiber Optical Cabling Infrastructure Offer
Fiber Optical Cabling Infrastructure Offer Zipcord Distribution Subunitized Distribution Armored Subunitized Distribution In/outdoor Distribution Armored In/outdoor Distribution Stranded Loose Tube High-Speed
FiberSolutions. Fiber Optic Cable & Assembly Solutions
Solutions Optic Cable & Assembly Solutions Solutions MOHAWK FIBER OPTIC CABLE AND ASSEMBLY SOLUTIONS Today s fast paced world places an unyielding burden on data centers to deliver high performance and
Outside Plant. Medium Multi-Function Joint - MMJ. Features and Benefits. Prysmian Part Numbers: See page 3. Kit Contents.
Medium Multi-Function Joint - MMJ Prysmian Part Numbers: See page 3 The Medium Multi Function Joint (MMJ) is for jointing optical fibre cables. The joint is ideal for use as a Cable Chamber Joint, Track
MTP Multi Lite Trunk Assemblies
MTP Multi Lite Trunk Assemblies MTP Multi-Lite Trunk assemblies are a neat solution for providing up to four MTP -MTP links within a compact, high density ruggedised cable. The cable construction consists
Outside Plant. Compact Multi-Function Joint - CMJ. Features and Benefits. Prysmian Part Number: CMJ-E-X-XXXX-X-Y-X. Kit Contents. Closure Part Number
Compact Multi-Function Joint - CMJ Prysmian Part Number: CMJ-E-X-XXXX-X-Y-X The Compact Multi Function Joint (CMJ) is for jointing optical fibre cables. The joint is ideal for use as a Cable Chamber Joint,
Data Center Product Summary
Data Center Product Summary Table of Contents Introduction...3 Building Access Cables: Outside Plant Ribbon Cables...4 Indoor & Indoor/Outdoor Ribbon Cables...5 Outside Plant MicroDuct Cables...6 Inside
Outside Plant. Compact Multi-Function Joint - CMJ. Features and Benefits. Prysmian Part Numbers: See page 3. Kit Contents.
Compact Multi-Function Joint - CMJ Prysmian Part Numbers: See page 3 The Compact Multi Function Joint (CMJ) is for jointing optical fibre cables. The joint is ideal for use as a Cable Chamber Joint, Track
OXIN Setting the Standards Fiber Optic Cable
OXIN Setting the Stards Fiber Optic Cable Catalogue About Oxin Group Oxin is a leading provider of fiber optic connectivity products used in data communications Telecommunication networks. The Company
Multifibre Full Breakout 1.6mm Cable Assemblies
Product updated on November 14, 2017 Multifibre Full Breakout 1.6mm Cable Assemblies Item Description Multicore full breakout cable assemblies are ideal for short cable runs where a direct connection to
B.T.C. Iberica Instrumentation Cable
B.T.C. Iberica Instrumentation Cable Single & Multi-Pair, XLPE-Insulation, Collective Screen, LSZH-Sheath 70º / 300/500 Construction Conductor Plain, annealed copper, sizes:, 1.0mm²,, 0.75mm² or 1.5mm²
FutureLink Modular. Fiber Optic Cabling System. Issue 1. Corning Cable Systems. Project Services. Data Centers OEM. Private Networks.
FutureLink Modular Fiber Optic Cabling System Issue 1 Corning Cable Systems Vogel. Michael P. Giordano. November 2000 Carrier Networks Private Networks OEM Data Centers Project Services Introduction 6
B.T.C. Iberica Instrumentation Cable
Instrumentation Cable BS 5308 Part 1 Type 2 Single & Multi-Pair, XLPE-Insulation, Collective Screen,, -Sheath 70º / 300/500 Construction Conductor Plain, annealed copper, sizes:, 1.0mm²,, 0.75mm² or 1.5mm²
B.T.C. Iberica Instrumentation Cable
Instrumentation Cable Multi-Core, PC-, Collective Screen, PC-Sheath 70º / 300/500 Construction Conductor Plain, annealed copper, sizes:0.5mm² multistranded, 0.75mm² mulitistranded, or 1.5mm² stranded Polyvinyl
Alternative Energy Solutions
Alternative Energy Solutions Fiber Optic Cabling Solutions for Wind and Solar Farms VISIT US AT WWW.OFSOPTICS.COM Centralized Wind and Solar Farm Automation The power network is changing. It needs the
Opt-X Enterprise Fiber Trunk Cables
APPLICATION Factory-terminated and tested fiber trunk cables connect central patching locations to zones or pods. Available terminated with both modular (MTP ) and discrete connectors, these trunks are
There, we ve put it all together. Joints and fibre cables in one complete solution.
There, we ve put it all together. Joints and fibre cables in one complete solution. Joints and fibre cables in one complete solution. Now you re able to buy both the cable and the joint from one manufacturer
Fiber Selection and Standards Guide for Premises Networks
Fiber Selection and Standards Guide for Premises Networks WP1160 Issued: November 2012 Supersedes: October 2007 Authors: Carl Roberts and Dr. Russell Ellis Introduction There are several main types of
Adventum Plenum Rated Indoor/Outdoor Optical Cable
Berk-Tek s revolutionary Outdoor/Indoor Adventum cables are designed to be used in plenum rated environments. Adventum supports the latest Gigabit Communications Protocols, including Gigabit Ethernet and
B.T.C. Iberica Instrumentation Cable
Multi-Core, PC-Insulation, Collective Screen,, PC-Sheath Construction Conductor Plain, annealed copper, sizes:0.5mm² multistranded, 0.75mm² mulitistranded, or 1.5mm² stranded Insulation Polyvinyl chloride
Optical Fiber Cable Repeated Bending Tester
About Us Since our founding, Torontech has become one of the world's leading diversified manufacturers of specialized industrial equipment, consumables, and related service businesses. Torontech products
MTP Cabling Overview. MTP Cabling System
MTP cabling architectures utilise varying cable and patchcord configurations as defined in TIA-568-C.0-2. These cables vary by gender, fibre orientation and pair management. AFL manufactures a large and
FiberConnect FiberTech FiberSwitch FiberSplit
FiberConnect FiberTech FiberSwitch FiberSplit 71 Simplex indoor cable FO Cables FiberConnect I-V(ZN)H 1 UL OFNR Order no. 84950407 Standardisation DIN VDE 0888, Part 4 and IEC 60 794-2 Application Indoor
Fiber Optical Cabling Infrastructure Offer
Fiber Optical Cabling Infrastructure Offer OEM and Custom Zipcord Distribution Subunitized Distribution Armored Subunitized Distribution In/outdoor Distribution Armored In/outdoor Distribution Cable Structure
SWA Cable BS5467 Steel Wire Armoured PVC
SWA Cable BS5467 Steel Wire Armoured PVC Application SWA cable power and auxiliary control cables for use in power networks, underground, outdoor and indoor applications and for use in cable ducting Standards
The Multi-core Coloured Soft Control Cables
VCT-F The Multi-core Coloured Soft Control Cables 16core X 0.3 2 colour available in Grey or Black Cold Resistant -25 C Heat Resistant +60 C Application control cables covers all electrical installation
Optical Fiber for Today s Premises Applications
Optical Fiber for Today s Premises Applications Tony Irujo Customer Technical Support Mgr. OFS Optical Fiber Division 508-347-8582 tirujo@ofsoptics.com 1 Copyright 2006 Fitel USA Corp., All rights reserved.
There, we ve put it all together. Joints and fibre cables in one complete solution.
There, we ve put it all together. Joints and fibre cables in one complete solution. Joints and fibre cables in one complete solution. Now you re able to buy both the cable and the joint from one manufacturer
THE NEW OPTICAL FIBRE CATEGORIES What do they promise?
THE NEW OPTICAL FIBRE CATEGORIES What do they promise? prepared and delivered by ϕ Breakfast Seminar 13th March 2001 Fibreoptic Industry Association PO Box MT65 LEEDS LS17 8YD UK Tel: +44 (0) 113 232 3721
Optical Fibre Assemblies
V.3.2 MTP Fan-Out Assemblies Optronics MTP ruggedized fan-out assemblies route multifibre MTP connection into discreet connectors. They are used to directly interconnect MTP cassettes, panels or backbone
Optical Fiber Cable Flexibility Testing Machine TT-OFCF Series
Optical Fiber Cable Flexibility Testing Machine TT-OFCF Series About Us Since our founding, Torontech has become one of the world's leading diversified manufacturers of specialized industrial equipment,
EDGE Solutions Trunk Cable, SMF-28 Ultra OS2, MTP to MTP, 12 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
OAsys. 24 Fibre Swing Out Splicing and Patching Shelf. Rack Mounted Products. Features and Benefits. Prysmian Part Numbers: See Table on page 3
Fibre Swing Out Splicing and Patching Shelf Prysmian Part Numbers: See Table on page 3 Picture shows shelf fitted with one FC panel and one SC panel The OAsys Fibre Swing Out Splicing and Patching Shelf
Qualified Partner Programme QPP. Fiber Optic Gigabit Ethernet Theory Felice Guarna
Qualified Partner Programme QPP Fiber Optic Gigabit Ethernet Theory Felice Guarna Applications The protocols used in LAN mostly base on Ethernet technology. In 1998 the IEEE 802.3z was passed (Gigabit
OPTICAL CABLE & CABLE ASSEMBLY
OPTICAL CABLE & CABLE ASSEMBLY FIBER OPTIC INDOOR CABLE MM 50 m (OM2) MULTI LOOSE TUBE CABLE Indoor Thight Buffer LSOH, 4 core NVLINMM2004LSOH MM 62.5 m MM 50 m (OM2) MM 50 m (OM3 550+/ OM4) Direct Burial
Pretium EDGE HD Solutions A LANscape Pretium Solutions Product
Pretium EDGE HD Solutions for Enterprise Data Centers and Storage Area Networks Corning Pretium EDGE HD solutions create a fiber optic tip-to-tip solution for data centers and storage area networks (SANs)
Selection table for water-resistant cables
Just click on the products in the selection table. Click on the HELUKABEL logo at the end of the page to go back. Cables & Wires Selection table for water-resistant cables www.helukabel.com WATER-RESISTANT
Delivering next-generation fibre throughout every building
Delivering next-generation fibre throughout every building Linking the future As the worldwide leader in the cable industry, Prysmian Group believes in the effective, efficient and sustainable supply of
Outside Plant. Modular Jointing System MJS-OPGW. Features and Benefits. Prysmian Part Number: See below. Kit Contents. Additional Items.
Modular Jointing System MJS-OPGW Prysmian Part Number: See below The OPGW Modular Jointing System (MJS-OPGW) is a stainless steel joint for use within the external optical fibre network. It is primarily
Using Laser-Optimized Multimode Fiber for 1 and 10 Gigabit Campus Backbone Applications
Using Laser-Optimized Multimode Fiber for 1 and 10 Gigabit Campus Backbone Applications David Kozischek, Market Manager Enterprise Networks, Corning Optical Communications Systems engineers at Corning
TIA 942. no need for dust caps. Pretium EDGE Solutions
LANscape Pretium EDGE (Evolved-Density, Growth-Enabled) Solutions Innovative drawer-style hardware Bend-insensitive fibre cables Offers unprecedented patchcord/connector access while achieving the highest
POWERFLEX PLUS YMvKfmb
1. Object This document defines the design and manufacturing characteristics of the cable type YmvKfmb and XV-F2 manufactured by Top Cable. 2. Design This type of cable is designed, manufactured and tested
Product Catalogue. MPO / MTP Solutions
Product Catalogue MPO / Solutions version 2017 Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients around
AMP ACT 1 INSTALLING PREMISES CABLING SYSTEM. Welcome!!! Instructor : Nicholas Yeo
AMP ACT 1 INSTALLING PREMISES CABLING SYSTEM Welcome!!! Instructor : Nicholas Yeo AMP ACT 1 INSTALLING PREMISES CABLING SYSTEM Welcome!!! 2 Standards ISO CENELEC AS/NZS ANSI IEC CSA TIA EIA EN50173 AS/NZS
PRODUCT INFORMATION. ETHERLINE Cat.5e. Info Industrial Ethernet cable Cat.5e
Ethernet cable Category 5e, Class D for fixed installation - verified up to 100 MHz Industrial Ethernet cable Cat.5e for fixed installation halogenfree or PUR (AWM-approval) outer sheath material, design
Application Note AN114
Application Note AN114 Fiber Optic Cabling System for Fiber Optic Rotational Sensors in Industrial Environments Objective This application note provides the engineer with guidance on designing and procuring
SPEC SHEET. Multimode Patch Cords and Pigtails. Cable types. Description. Features. Fiber types
Multimode Patch Cords and Pigtails SPEC SHEET Description ADC KRONE offers a wide array of multimode fibre optic patch cords featuring Riser and LSZH cables in various diameters. ADC KRONE s multimode
Construction Materials. Dimensions. Environmental Specifications. General Specifications. Mechanical Specifications
760184002 TeraSPEED LC to SC, Fiber Patch Cord, 1.6 mm Simplex, Plenum Total Fibers, quantity 1 TeraSPEED, zero water peak singlemode fiber (G.652.D, G.657.A1 or G.652.D, G.657.A1 OS2) Dimensions Cord
PRODUCT INFORMATION. ETHERLINE Cat.5e FLEX. Info Industrial Ethernet cable Cat.5e Only for patch cable applications (max. 60 m)
Ethernet cable Category 5e, Class D for flexible use - verified up to 100 MHz Industrial Ethernet cable Cat.5e for flexible use halogenfree or PUR (AWM-approval) outer sheath material, design 2 or 4 x2xawg26/7
FLAME RETARDANT RIBBONIZED FIBER
FLAME RETARDANT RIBBONIZED Applications Inter-equipment connections NEBS applications Features/Benefits Color coded fibers Suitable for use with standard ribbon connectors Half-inch minimum bend radius
Is Your Network Ready for 100 Gig? Specifying Optical Fiber for the Next Generation
Is Your Network Ready for 100 Gig? Specifying Optical Fiber for the Next Generation John Kamino OFS Product Manager Multimode Fiber jkamino@ofsoptics.com Fiber Market Drivers Agenda Fiber Types and Standards
OAsys. SRS3000 1U Splice and Patch Shelf. Rack Mounted Products. Features and Benefits. Prysmian Part Number: See table on following pages.
SRS3000 1U Splice and Patch Shelf Prysmian Part Number: See table on following pages. The SRS3000 Splice and Patch Shelf is a modular unit available in a variety of configurations for integration in to
DIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2000 Simplex PC/APC MULTIMODE PC Constant innovation in the field of fiber optics has created demand for products with ever increasing performance
Pretium EDGE Solutions Harness, 12 fibres,
Corning Cable Systems LANscape Pretium EDGE (Evolved -Density, Growth -Enabled) Solutions are high density pre -terminated optical cabling systems that simplify installation and improve performance in
Multifiber Full Breakout Cable Assemblies
Product updated on November 21, 2018 Multifiber Full Breakout Cable Assemblies Multicore full breakout cable assemblies are ideal for short cable runs where a direct connection to equipment or panels is
P R O D U C T C AT A L O G T ALOG
2 0 0 2 2002 PRODUCT CATALOG Need More Information? Visit our Web site at Instruction Sheets Cut Sheets White Papers Data Sheets Product/Part Number Searches AMP NETCONNECT Sales Engineer Contacts Authorized
Rack Mounted Products
SRS3000 Distribution Sub-Rack Prysmian Part Number: See Below The SRS3000 Distribution Sub-Rack is a modular sub-rack available in a variety of configurations for integration into 9 / ETSI / ANSI racks,
13-SDMS-01 REV SDMS-01, REV.00 SEC DISTRIBUTION MATERIALS SPECIFICATION DATE: G
13-SDMS-01 REV. 00 SPECIFICATIONS FOR FIBER OPTIC CONNECTIVITY COMPONENTS (PATCH CORDS, PIGTAILS, FAN-OUT CABLES AND CONNECTORS FOR INTERNAL INSTALLATIONS) This specification is property of SEC and subject
GALLIA EST OMNIS DIVISA. AeroLink TM ADSS Cables
GALLIA EST OMNIS DIVISA AeroLink TM ADSS Cables About Us Prysmian (formerly Pirelli) has been in the cabling business for over 125 years, operating with 53 manufacturing plants and more than 12,000 employees
Rack Mounted Products
SRS3000 1U Patch Only Shelf Prysmian Part Number: See table on following pages. The SRS3000 Patch Only Shelf is a modular unit available in a variety of configurations for integration in to 19 and ETSI
Data Center & Cloud Computing Infrastruture Solutions DATASHEET. Standard Fiber Patch Cable. Make high-speed Ethernet network equipment connections
Data Center & Cloud Computing Infrastruture Solutions DATASHEET Standard Fiber Patch Cable Make high-speed Ethernet network equipment connections 1 Description Fiber optic patch cables are ideal for supporting
Fiber Design for Traffic Signals and ITS Projects
Fiber Design for Traffic Signals and ITS Projects PRESENTER: Mike Lubin ATKINS National ITS (Atlanta) Sr. Network Engineer 16 Years Telecom Experience 13 Years with ATKINS Sr. Network Engineer ITS Network
Cable assembly types. L tot. Total length* L tot end-to-end total (min. 0.5 except receptacles)
CABLE ASSEMBLY TYPES Quantity - Please use one request form per cable assembly type End A Cable assembly types End B Patch cord Receptacle Gas tight receptacle L b Breakout L b Single Fiber Drawings are
Product Classification. Construction Materials. Dimensions. Environmental Specifications. General Specifications. Mechanical Specifications
760200527 TeraSPEED FC APC to Unconnectorized, Fiber Patch Cord, 1.6 mm Simplex, Plenum Product Portfolio Brand Product Type CommScope TeraSPEED Fiber test patch cord Regional Availability Asia Australia/New
AMP NETCONNECT XG FIBER SYSTEM
AMP NETCONNECT XG FIBER SYSTEM The Complete High-Performance, Cost-Effective Optical Fiber Premises Cabling Solution for Supporting the Emerging Ten Gigabit Networks von mit freundlicher Genehmigung von
Rack Mounted Products
SRS4000 Distribution Sub-Rack Prysmian Part Number: See Below The SRS4000 Distribution Sub-Rack is a modular sub-rack available in a variety of configurations for integration into 19 / ETSI / ANSI racks,
R&Mfreenet Advanced Cat 6 A Unshielded Connection Module
R&Mfreenet Advanced R&Mfreenet Advanced Cat 6 A Connection Module The R&Mfreenet Cat 6 A unshielded connection modules, part of the Advanced cabling system, are ideal for voice, fast data transmissions
Data Center & Cloud Computing Infrastruture Solutions DATASHEET. MTP/MPO-LC Breakout Cable Aseemblies High Density Cabling System
Data Center & Cloud Computing Infrastruture Solutions DATASHEET MTP/MPO-LC Breakout Cable Aseemblies High Density Cabling System REV.2.0 2018 MTP/MPO Breakout Cable 01 Description MTP/MPO breakout assemblies
N-4 FIBRE OPTIC CABLES
N- FIBRE OPTIC CABLES CONTENTS Presentation Basic technologies Single mode fibres Dispersion shifted fibres Multimode fibres./ Multimode fibres 0/ Non zero dispersion fibres Tight fibres DIELECTRIC LOOSE
Panduit Certified Installer. Fiber Certification Review
Panduit Certified Installer Fiber Certification Review 2 What does the cleave tool do? A. Breaks the glass cleanly B. Cuts the glass cleanly C. Scores the glass cleanly D. Shatters the glass cleanly Breaks
Product information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749
Product information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749 1 Pcs. Front panel with staggered arrangement of adapters. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius
200-micron Fiber Enables New Cable Designs
White Paper 200-micron Fiber Enables New Cable Designs Since single-mode fiber was first introduced in the early 1980 s, little has changed in its basic geometric parameters. The core size has remained
ÖLFLEX CLASSIC 130 H - halogen-free control cable, HFFR and flexible for various applications, U 0 /U: 300/500V
PRODUCT INFORMATION Halogen-free control cable with improved fire characteristics - halogen-free control cable, HFFR and flexible for various applications, U 0 /U: 300/500V Info CPR: Article number choice
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING USB 2.0 / 3.0 CABLES. Kuka
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING USB 2.0 / 3.0 CABLES Kuka CONTENT OVERVIEW Who we are................................................................................................................
Polymer Coated Fiber Cable (PCF)
Polymer Coated Fiber Cable (PCF) Panduit has introduced a Polymer Coated Fiber (PCF) to their fiber cable offering available in 50µm and 62.5µm core diameters. Along with this cable having a stronger durability
COMMUNICATION & NETWORK DESIGN STANDARD CABLING STANDARDS. Version AUTHOR: Gary Hill, Anatoli Bogajewski
COMMUNICATION & NETWORK DESIGN STANDARD CABLING STANDARDS Version 1.26 AUTHOR: Gary Hill, Anatoli Bogajewski DOCUMENT CONTROL Version Changed By Description Date 1.0 Gary Hill Document created / Draft.
INDUSTRIAL TRAY CABLE PRODUCTS
Overview OCC s new product line for Power and Control Tray Cable for industrial applications offers a robust and dependable product with enhanced mechanical and environmental performance features. The