Certificate Z SIMATIC S7 Distributed Safety

Size: px
Start display at page:

Download "Certificate Z SIMATIC S7 Distributed Safety"

Transcription

1 Annex 1 of the Report to the Certificate Z Safety-Related Programmable System SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D Nürnberg Revision 2.4 dated Testing Body: Rail Automation D München Certification Body: TÜV SÜD Product Service GmbH Ridlerstrasse 65 D München Distribution, copying or any other use of information in this report in part is strictly prohibited.

2 Revision Log Version Name Date Changes/History 1.0 J. Blum Initial for IEC 61508(ed.2) 1.1 J. Blum Release Number 04 added (SN88143T): F-DI 8x24VDC HF (6ES BA00-0CA0) F-DQ 4x24VDC/2A PM HF (6ES DB00-0CA0) F-PM-E 24VDC/8A PPM ST (6ES PA00-0BC0) 1.2 J. Blum Release Number 02 added (FM-Approval): F-RQ 1x24VDC/ VAC/5A (6ES RA00-0BF0) 2.0 J. Blum EN ISO :2015 (SN88739T) IEC :2016 (SN88739T) Replace certificate (Z with Z ) due to updated standard 2.1 C. Dirmeier Release Number 05 added (SN90106T): F-PM-E 24VDC/8A PPM ST (6ES PA00-0BC0) 2.2 C. Dirmeier FW Version V5.0.1 added (SN90400T): 2.3 G. Effenberger 4 F-DO DC24V/2A (6ES FB04-0AB0) New certificate number Added chapter P. Weiß New version of S7 F Configuration Pack (SF91373T): V5.5 SP13 added Module added (SN90962T): F-DQ 8x24VDC/0.5A PP HF (6ES DC00-0CA0) Content 1 HARDWARE AND FIRMWARE COMPONENTS CPU`S WHICH ARE SUITABLE FOR SAFETY-RELATED APPLICATIONS BY USING A FAIL-SAFE- APPLICATION PROGRAM CPU ET 200S CPU ET 200pro CPU S CPU S7-400 * Soft-PLC F-MODULES ET 200SP ET 200M ET 200S ET 200pro ET 200eco ET 200iSP Interference-Free Components USE WITH COMPONENTS LISTED IN CERTIFICATE SIMATIC SAFETY SYSTEM SAFETY-RELEVANT SOFTWARE COMPONENTS NON-SAFETY RELEVANT SOFTWARE COMPONENT Phone: +49 (89) ; Fax: Page 2 of 10

3 Safety-Certified and Interference-Free Components 1 Hardware and Firmware Components The following system components are certified safety-related. This allows the components to be used to process safety critical signals and functions: 1.1 CPU`s which are suitable for safety-related applications by using a fail-safeapplication program CPU ET 200S Name Order Number Release Number / Firmware Version IM151-7 F-CPU 6ES FA21-0AB0 01 or higher / V3.3.2 or higher IM151-8F PN/DP 6ES FB01-0AB0 01 or higher / V3.2.1 or higher CPU ET 200pro Name Order Number Release Number / Firmware Version IM154-8F PN/DP 6ES FB01-0AB0 01 or higher / V3.2.1 or higher IM154-8FX PN/DP 6ES FX00-0AB0 01 or higher / V3.2.5 or higher CPU S7-300 Name Order Number Release Number / Firmware Version CPU315F-2 DP 6ES FF04-0AB0 01 or higher / V3.0.0 or higher CPU315F-2 PN/DP 6ES FJ14-0AB0 01 or higher / V3.1.0 or higher CPU317F-2 DP 6ES FF04-0AB0 01 or higher / V3.3.1 or higher CPU317F-2 PN/DP 6ES FK14-0AB0 01 or higher / V3.1.0 or higher CPU317TF-3 PN/DP 6ES UL10-0AB0 01 or higher / V3.2.9 / or higher CPU319F-3 PN/DP 6ES FL01-0AB0 01 or higher / V3.2.0 or higher Phone: +49 (89) ; Fax: Page 3 of 10

4 1.1.4 CPU S7-400 * Name Order Number Release Number / Firmware Version CPU414F-3 PN/DP 6ES FM06-0AB0 01 or higher / V6.0.0 or higher CPU414F-3 PN/DP 6ES FM07-0AB0 01 or higher / V7.0.0 or higher CPU416F-2 DP 6ES FN05-0AB0 01 or higher / V5.0.1 or higher CPU416F-2 DP 6ES FP07-0AB0 01 or higher / V7.0.0 or higher CPU416F-3 PN/DP 6ES FS06-0AB0 01 or higher / V6.0.0 or higher CPU416F-3 PN/DP 6ES FS07-0AB0 01 or higher / V7.0.0 or higher * The sinusoidal vibrations service conditions does not comply with the increased requirements of IEC nd and 3 rd Ed. The requirements of IEC :1992 are fulfilled Soft-PLC Name Order Number Release Number / Firmware Version WinAC RTX F / V4.5.0 or higher Phone: +49 (89) ; Fax: Page 4 of 10

5 1.2 F-Modules ET 200SP F-DI 8x24VDC HF 6ES BA00-0CA0 01 to 04 / V channel digital input module 24VDC F-DQ 4x24VDC/2A PM HF 6ES DB00-0CA0 01 to 04 / V channel digital output module 24VDC F-DQ 8x24VDC/0.5A PP HF 6ES DC00-0CA0 01 / V channel digital output module 24VDC F-PM-E 24VDC/8A PPM ST 6ES PA00-0BC0 01 to 05 / V1.0.5 power module 24VDC; P- / M-switch F-RQ 1x24VDC/ VAC/5A 6ES RA00-0BF0 01 to 02 1 channel digital relay output module 24VDC/5A, VAC/5A ET 200M DI 24 x DC24V 6ES BK02-0AB channel digital input module 24VDC DI 8 x NAMUR 6ES RF01-0AB channel NAMUR digital input module for intrinsically-safe sensors DO 10 x DC 24V/2A PP 6ES BF10-0AB0 03 / V channel digital output module 24VDC/2A, P-switch DO 8 x DC24V/2A PM 6ES BF41-0AB channel digital output module 24VDC/2A, P/M-switch AI 6 x 0/4 20 ma HART 6ES GE00-0AB0 04 / V channel analog input module, HART Safety Protector 6ES KF00-0XA0 04 Safety protector protects the fail-safe signal modules from possible overvoltage Phone: +49 (89) ; Fax: Page 5 of 10

6 1.2.3 ET 200S 4/8 F-DI DC24V 6ES FA05-0AB0 01 / V /8 channel digital input module 24VDC 4 F-DO DC24V/2A 6ES FB04-0AB0 01 / V5.0.0, V channel digital output module 24VDC/2A; P/M switch 4F-DI/3F-DO 6ES FC01-0AB channel digital input / 3 channel digital output module 24VDC/2A 1F-RO DC24V/5A, AC V/5A 6ES FR00-0AA channel digital relay output module DC24V/5A, AC24 230V/5A PM-E F pm DC24V 6ES CF03-0AB0 02 Power module 24VDC; P/M switch PM-E F pp DC24V 6ES CF42-0AB0 02 Power module 24VDC; P/P switch PM-D F DC24V 3RK1903-3BA02 01 Power module 24VDC for failsafe motor starters ET 200pro 8/16 F-DI DC24V 6ES FA00-0AB0 06 8/16 channel digital input module 24VDC 4/8 F-DI/4 F-DO DC24V/2A 6ES FC00-0AB0 06 4/8 channel digital input 24VDC and 4 channel digital output module 24VDC/2A P- / M-switch (combined) F-Switch 6ES FS00-0AB channel digital input 24VDC and 3 channel digital P- / P-switch module Phone: +49 (89) ; Fax: Page 6 of 10

7 24VDC (combined) ET 200eco 4/8 F-DI DC24V 6ES FA00-0XB0 05 4/8 channel digital input module 24VDC ET 200iSP 4F-DO Ex 17,4V/40mA 6ES FD00-0AB0 02 / V channel digital output module 17,4VDC/40mA PP-switch 8F-DI Ex NAMUR 6ES FN00-0AB0 02 / V channel NAMUR digital input module 4F-AI Ex HART 6ES FA00-0AB0 02 / V channel analog input module, HART Interference-Free Components All other components of the S7 family are 'interference-free' and allowed to be used; however, they are not certified for process safety critical signals and functions. Using these components does not interfere with the proper functioning of the safety-related modules. For details on architectural, configuration and implementation requirements please refer to the corresponding user manuals. 1.3 Use with components listed in certificate SIMATIC Safety System The following components can also be used with components listed within the certificate of SIMATIC Safety System: - F-CPUs: CPU ET 200S, CPU ET 200pro, CPU S7-300, CPU S7-400 and Soft-PLC - F- modules: ET 200SP, ET 200M, ET 200S, ET 200pro, ET 200eco and ET 200iSP. For details, please see chapter 2.4 of report to the certificate of SIMATIC Safety System. Phone: +49 (89) ; Fax: Page 7 of 10

8 2 Safety-Relevant Software Components Software Component / Name The Optional Package S7 Distributed Safety includes the following F application blocks and F system blocks: Symbolic name Function in safety program Signature Initial value signature F_SCA_I F application block D8CA 2452 F_CTU F application block 8AC F_CTD F application block F77D 2452 F_CTUD F application block 7C8F 2452 F_TP F application block 669E 980D F_TON F application block 6B7E 980D F_TOF F application block 14B4 980D F_ACK_OP F application block 351F A150 F_2HAND F application block EEB8 6EF7 F_MUTING F application block 606B AF14 F_1oo2DI F application block 6AA7 2C7D F_2H_EN F application block 26CD 6EF7 F_MUT_P F application block CB71 7D3C F_ESTOP1 F application block 2E11 AE5E F_FDBACK F application block F521 F965 F_SFDOOR F application block 86DA 76E6 F_ACK_GL F application block 8B12 F2DE F_SENDDP F application block F0B9 4E03 F_RCVDP F application block 42F1 54E4 F_SENDS7 F application block 71D7 9BFF F_RCVS7 F application block 4D3C E1A5 F_SHL_W F application block 4D39 - F_SHR_W F application block E4E3 - F_BO_W F application block 20A5 - F_W_BO F application block BD67 - Version S7 Distributed Safety Programming V5.4 SP5 S7 F-Configuration Pack V5.5 SP11/12/13, G. Effenberger hone: +49 (89) ; Fax: Page 8 of 10

9 Symbolic name Function in safety program Signature Initial value signature F_INT_WR F application block A78A - F_INT_RD F application block BA20 - F_CTRL_1 F system block 504C BED9 1 F_CTRL_2 F system block 40BA 9E40 F_IO_BOI F system block FAFA B79C F_RTGCO2 F system block D292 7A4A 2 F_IO_CGP F system block EDA2 DC2F F_DIAG_N F system block 99CA 3612 FISCA_I F system block A0FB 50E4 FICTU F system block 2304 A28F FICTD F system block 7AC0 A28F FICTUD F system block E51F E876 FITP F system block 7E FITON F system block E1DF ED43 FITOF F system block 69AF 3326 FIACK_OP F system block BDC3 B593 FI2HAND F system block 7131 F85A FIMUTING F system block D5F9 B0C4 FI1oo2DI F system block C2E2 AEAA FI2H_EN F system block F72 FIMUT_P F system block E8D5 2C45 FIACK_GL F system block 9FB4 D360 FISHL_W F system block 146E 8E58 FISHR_W F system block AB8F 8E58 FIBO_W F system block 963B BED5 FIW_BO F system block 7A7F BED5 FIINT_WR F system block CFA9 980D FIINT_RD F system block 1D3F 980D 1 To difference the modification of F_CTRL_1 in version 5.4 SP5 from previous versions it is necessary to consider the F_CTRL_1 version (header) To difference the modification of F_RTGCO2 in version 5.4 SP5 from previous versions it is necessary to consider the F_CTRL_1 version (header) 1.1. Phone: +49 (89) ; Fax: Page 9 of 10

10 3 Non-Safety Relevant Software Component Function STEP 7 3 Version V5.3 + Service Pack 3 or higher Munich, Rail Automation P. Supavatanakul Technical Certifier 3 Further restrictions specific to modules or versions of the optional package S7 Distributed Safety can be found in the corresponding user documentation. Phone: +49 (89) ; Fax: Page 10 of 10

Certificate Z SIMATIC S7 Distributed Safety

Certificate Z SIMATIC S7 Distributed Safety Annex 1 of the Report to the Certificate Z10 16 06 67803 012 Safety-Related Programmable System SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision

More information

Certificate Z SIMATIC Safety System

Certificate Z SIMATIC Safety System Annex 1 of the Report to the Certificate Z10 16 02 67803 010 Safety-Related Programmable System SIMATIC Safety System Manufacturer: Siemens AG Gleiwitzer Str. 555 D-90475 Nürnberg Revision 1.15 dated 2016-06-30

More information

Certificate Z SIMATIC Safety System

Certificate Z SIMATIC Safety System Annex 1 of the Report to the Certificate Z10 16 02 67803 010 Safety-Related Programmable System SIMATIC Safety System Manufacturer: Siemens AG Gleiwitzer Str. 555 D-90475 Nürnberg Revision 2.0 dated 2016-09-27

More information

Certificate Z SIMATIC Safety System

Certificate Z SIMATIC Safety System Annex 1 of the Report to the Certificate Z10 16 02 67803 010 Safety-Related Programmable System SIMATIC Safety System Manufacturer: Siemens AG Gleiwitzer Str. 555 D-90475 Nürnberg Revision 2.7 dated 2017-12-18

More information

to the Certificate Z SIMATIC S7 F/FH Systems Manufacturer: Siemens AG PD PA AE R&D Östliche Rheinbrückenstr. 50 D Karlsruhe

to the Certificate Z SIMATIC S7 F/FH Systems Manufacturer: Siemens AG PD PA AE R&D Östliche Rheinbrückenstr. 50 D Karlsruhe Annex 1 of the Report to the Certificate Z10 16 06 20080 004 SIMATIC S7 F/FH Systems Manufacturer: Siemens AG PD PA AE R&D Östliche Rheinbrückenstr. 50 D-76187 Karlsruhe Revision 1.8 dated 2018-02-26 Testing

More information

SIMATIC ET 200SP Product information on documentation of the ET 200SP distributed I/O system Product Information

SIMATIC ET 200SP Product information on documentation of the ET 200SP distributed I/O system Product Information SIMATIC ET 200SP Product information on documentation of the ET 200SP distributed I/O system Product Information General amendments to the documentation Contents This product information includes amendments

More information

Report. Certificate M6A SIMATIC S7 Distributed Safety

Report. Certificate M6A SIMATIC S7 Distributed Safety Report to the Certificate M6A 17 05 67803 014 Safety-Related Programmable Systems SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision 3.1 dated

More information

SIMATIC. Process Control System PCS 7 Released modules (V8.0) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6.

SIMATIC. Process Control System PCS 7 Released modules (V8.0) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6. ET 200M 1 Gateway 2 SIMATIC rocess Control System CS 7 Catalog Overview ET 200S 3 ET 200iS 4 ET 200S 5 ET 200X 6 ET 200pro 7 Repeater 8 Network Components 9 C 10 C-based automation 11 CS 7 12 S7-300 13

More information

Product Information on the Manual

Product Information on the Manual Edition 12.2004 S7-300 Programmable Controller; Module Specifications, as of Edition 02/2004 (A5E00105505) ET 200M Distributed I/O Device Signal Modules for Process Automation, as of Edition 10/2004 (A5E00085262)

More information

Short Description. Version

Short Description. Version S7-400 S7-400 CP 443-1 6GK7 443-1EX11-0XE0 V2.6 S7 CP for Industrial Ethernet ISO and TCP/IP with SEND/RECEIVE and FETCH/WRITE interface, long data, UDP, TCP, ISO, S7 communication, routing, module replacement

More information

CIS-331 Fall 2014 Exam 1 Name: Total of 109 Points Version 1

CIS-331 Fall 2014 Exam 1 Name: Total of 109 Points Version 1 Version 1 1. (24 Points) Show the routing tables for routers A, B, C, and D. Make sure you account for traffic to the Internet. Router A Router B Router C Router D Network Next Hop Next Hop Next Hop Next

More information

4. Specifications and Additional Information

4. Specifications and Additional Information 4. Specifications and Additional Information AGX52004-1.0 8B/10B Code This section provides information about the data and control codes for Arria GX devices. Code Notation The 8B/10B data and control

More information

Certificate Z

Certificate Z Annex 3 of the Report to the Certificate Z10 09 07 67803 004 Safety-Related Programmable System Safety Matrix SIMATIC S7 F/FH Systems Manufacturer: Siemens AG Werner-von-Siemens Str. 50 D-92224 Amberg

More information

https://support.industry.siemens.com/cs/ww/en/view/

https://support.industry.siemens.com/cs/ww/en/view/ Support Packages for TIA Portal V14 February 2018 https://support.industry.siemens.com/cs/ww/en/view/72341852 Siemens Industry Online Support This entry is from the Siemens Industry Online Support. The

More information

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6.

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6. ET 200M 1 Gateway 2 SIMATIC rocess Control System CS 7 Catalog Overview ET 200S 3 ET 200iS 4 ET 200S 5 ET 200X 6 ET 200pro 7 Repeater 8 Network Components 9 C 10 C-based automation 11 CS 7 12 S7-300 13

More information

SPARE CONNECTORS KTM 2014

SPARE CONNECTORS KTM 2014 SPAREPARTSCATALOG: // ENGINE ART.-NR.: 3208201EN CONTENT CONNECTORS FOR WIRING HARNESS AA-AN CONNECTORS FOR WIRING HARNESS AO-BC CONNECTORS FOR WIRING HARNESS BD-BQ CONNECTORS FOR WIRING HARNESS BR-CD

More information

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) Security information 1 ET 200M 2. Gateway 3 ET 200S 4. ET 200iSP 5 ET 200S 6

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) Security information 1 ET 200M 2. Gateway 3 ET 200S 4. ET 200iSP 5 ET 200S 6 Security information 1 ET 200M 2 SIMATIC rocess Control System CS 7 Offer overview Gateway 3 ET 200S 4 ET 200iS 5 ET 200S 6 ET 200X 7 ET 200pro 8 Repeater 9 Network Components 10 C 11 C-based automation

More information

S7-400 CPU ES XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI;

S7-400 CPU ES XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI; S7-400 CPU 412-1 6ES7 412-1XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; 0.075 ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI; send and receive capability for direct data exchange;

More information

https://support.industry.siemens.com/cs/ww/en/view/

https://support.industry.siemens.com/cs/ww/en/view/ Support Packages for TIA Portal V13 March 2018 https://support.industry.siemens.com/cs/ww/en/view/72341852 Siemens Industry Online Support This entry is from the Siemens Industry Online Support. The general

More information

SPAREPARTSCATALOG: CONNECTORS SPARE CONNECTORS KTM ART.-NR.: 3CM EN

SPAREPARTSCATALOG: CONNECTORS SPARE CONNECTORS KTM ART.-NR.: 3CM EN SPAREPARTSCATALOG: CONNECTORS ART.-NR.: 3CM3208201EN CONTENT SPARE CONNECTORS AA-AN SPARE CONNECTORS AO-BC SPARE CONNECTORS BD-BQ SPARE CONNECTORS BR-CD 3 4 5 6 SPARE CONNECTORS CE-CR SPARE CONNECTORS

More information

Report. Certificate M6A SIMATIC Safety System

Report. Certificate M6A SIMATIC Safety System Report to the Certificate M6A 067803 0019 Safety-Related Programmable Systems SIMATIC Safety System Manufacturer: Siemens AG Gleiwitzer Str. 555 D-90475 Nürnberg Revision 2.1 dated 2018-09-25 Testing Body:

More information

CIS-331 Exam 2 Fall 2015 Total of 105 Points Version 1

CIS-331 Exam 2 Fall 2015 Total of 105 Points Version 1 Version 1 1. (20 Points) Given the class A network address 117.0.0.0 will be divided into multiple subnets. a. (5 Points) How many bits will be necessary to address 4,000 subnets? b. (5 Points) What is

More information

CIS-331 Fall 2013 Exam 1 Name: Total of 120 Points Version 1

CIS-331 Fall 2013 Exam 1 Name: Total of 120 Points Version 1 Version 1 1. (24 Points) Show the routing tables for routers A, B, C, and D. Make sure you account for traffic to the Internet. NOTE: Router E should only be used for Internet traffic. Router A Router

More information

Product information on the documentation of the. ET 200SP distributed I/O system SIMATIC ET 200SP. ET 200SP distributed I/O system.

Product information on the documentation of the. ET 200SP distributed I/O system SIMATIC ET 200SP. ET 200SP distributed I/O system. Product information on the documentation of the ET 200SP distributed I/O system SIMATIC Preface Overview of the ET 200SP 1 General additions to the documentation 2 ET 200SP Product information on the documentation

More information

SIMATIC S plus TIA Portal

SIMATIC S plus TIA Portal Product range overview SIMATIC S7-1500 plus TIA Portal Power + Efficiency The ultimate plus in automation Intuitive, efficient, proven TIA Portal redefines engineering Answers for industry. Your plus of

More information

SIMATIC. Digital Input Module SM DI, DC24V - Sinking/Sourcing. Product information. Product Information

SIMATIC. Digital Input Module SM DI, DC24V - Sinking/Sourcing. Product information. Product Information SIMATIC Digital Input Module Product information 1 SIMATIC Digital Input Module Product Information This documentation is part of the documentation package with the order number: S7-300 Automation System:

More information

SIMATIC. Process Control System PCS 7 Released modules (V8.2) Security information 1 ET 200M 2. Gateway 3 ET 200PA SMART 4 ET 200S 5.

SIMATIC. Process Control System PCS 7 Released modules (V8.2) Security information 1 ET 200M 2. Gateway 3 ET 200PA SMART 4 ET 200S 5. SIMATIC rocess Control System CS 7 Offer overview Valid for CS 7 as of V8.2 Security information 1 ET 200M 2 Gateway 3 ET 200A SMART 4 ET 200S 5 ET 200iS 6 ET 200S 7 ET 200S 8 ET 200X 9 ET 200pro 10 Repeater

More information

CIS-331 Spring 2016 Exam 1 Name: Total of 109 Points Version 1

CIS-331 Spring 2016 Exam 1 Name: Total of 109 Points Version 1 Version 1 Instructions Write your name on the exam paper. Write your name and version number on the top of the yellow paper. Answer Question 1 on the exam paper. Answer Questions 2-4 on the yellow paper.

More information

SIMATIC. Automation system Fail-safe signal modules. Preface. Product overview 1. Configuration options 2. Configuration and parameter assignment

SIMATIC. Automation system Fail-safe signal modules. Preface. Product overview 1. Configuration options 2. Configuration and parameter assignment SIMATIC Automation system SIMATIC Automation system Installation and Operating Manual The following supplement is part of this documentation: No. Product Information Drawing number Edition 1 SM 336; F-AI

More information

CIS-331 Exam 2 Spring 2016 Total of 110 Points Version 1

CIS-331 Exam 2 Spring 2016 Total of 110 Points Version 1 Version 1 1. (20 Points) Given the class A network address 121.0.0.0 will be divided into multiple subnets. a. (5 Points) How many bits will be necessary to address 8,100 subnets? b. (5 Points) What is

More information

The cache is 4-way set associative, with 4-byte blocks, and 16 total lines

The cache is 4-way set associative, with 4-byte blocks, and 16 total lines Sample Problem 1 Assume the following memory setup: Virtual addresses are 20 bits wide Physical addresses are 15 bits wide The page size if 1KB (2 10 bytes) The TLB is 2-way set associative, with 8 total

More information

CIS-331 Exam 2 Fall 2014 Total of 105 Points. Version 1

CIS-331 Exam 2 Fall 2014 Total of 105 Points. Version 1 Version 1 1. (20 Points) Given the class A network address 119.0.0.0 will be divided into a maximum of 15,900 subnets. a. (5 Points) How many bits will be necessary to address the 15,900 subnets? b. (5

More information

Supplier s declaration of conformity

Supplier s declaration of conformity Supplier s declaration of conformity As required by the following Notices: > Radiocommunications (Compliance Labelling - Devices) Notice 2014 made under section 182 of the Radiocommunications Act 1992;

More information

Report. Certificate Z Rev. 00. SIMATIC Safety System

Report. Certificate Z Rev. 00. SIMATIC Safety System Report to the Certificate Z10 067803 0020 Rev. 00 Safety-Related Programmable System SIMATIC Safety System Manufacturer: Siemens AG Gleiwitzer Str. 555 D-90475 Nürnberg Revision 1.1 dated 2019-02-07 Testing

More information

Fail-Safe Group Shutdown of the ET 200SP F-Motor Starter with F-DQ SIMATIC Safety Integrated https://support.industry.siemens.com/cs/ww/en/view/109748128 Siemens Industry Online Support Warranty and Liability

More information

BẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/ Giá chưa bao gồm thuế VAT

BẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/ Giá chưa bao gồm thuế VAT BẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/2011 - Giá chưa bao gồm thuế VAT NO I SIMATIC S7-300 Central Processing Unit 1 6ES7312-1AE13-0AB0 SIMATIC S7-300, CPU 312 CPU WITH MPI INTERFACE, INTEGRATED

More information

https://support.industry.siemens.com/cs/ww/en/view/

https://support.industry.siemens.com/cs/ww/en/view/ Fail-Safe Group Shutdown of the ET 200SP F-Motor Starter with F-PM-E SIMATIC Safety Integrated https://support.industry.siemens.com/cs/ww/en/view/109748128 Siemens Industry Online Support Warranty and

More information

Engineered with TIA Portal. The powerful IO system for compact control cabinets SIMATIC ET 200SP. siemens.com/et200sp

Engineered with TIA Portal. The powerful IO system for compact control cabinets SIMATIC ET 200SP. siemens.com/et200sp Engineered with TIA Portal The powerful IO system for compact control cabinets SIMATIC ET 200SP siemens.com/et200sp The highlights of SIMATIC ET 200SP Distributed Controller The SIMATIC ET 200SP Open Controller

More information

ET 200S Motor Starters and Safety Motor Starters

ET 200S Motor Starters and Safety Motor Starters Overview for Standard motor starters Control kit The control kit for the Standard motor starter provides the possibility of testing the motor during start-up or service by actuating the motor starter protector.

More information

Report. Certificate Z SIMATIC S7 F/FH Systems

Report. Certificate Z SIMATIC S7 F/FH Systems Report to the Certificate Z10 16 06 20080 004 Safety-Related Programmable Systems SIMATIC S7 F/FH Systems Manufacturer: Siemens AG PD PA AE R&D Östliche Rheinbrückenstr. 50 D-76187 Karlsruhe Report no.

More information

Report to the Certificate Z

Report to the Certificate Z Report to the Certificate Z10 17 11 67803 018 Safety Related Programmable Electronic System PROFIsafe-Driver Manufacturer: Siemens AG Gleiwitzer Straße 555 90475 Nürnberg Germany Revision 1.1 dated 09.11.2017

More information

CIS-331 Final Exam Spring 2018 Total of 120 Points. Version 1

CIS-331 Final Exam Spring 2018 Total of 120 Points. Version 1 Version 1 Instructions 1. Write your name and version number on the top of the yellow paper and the routing tables sheet. 2. Answer Question 2 on the routing tables sheet. 3. Answer Questions 1, 3, 4,

More information

PROFIenergy product information SIMATIC. ET 200SP PROFIenergy product information. PROFIenergy 1. Product Information 12/2015 A5E AH

PROFIenergy product information SIMATIC. ET 200SP PROFIenergy product information. PROFIenergy 1. Product Information 12/2015 A5E AH PROFIenergy 1 SIMATIC ET 200SP Product Information 12/2015 A5E03871936-AH Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety,

More information

July Registration of a Cyrillic Character Set. Status of this Memo

July Registration of a Cyrillic Character Set. Status of this Memo Network Working Group Request for Comments: 1489 A. Chernov RELCOM Development Team July 1993 Status of this Memo Registration of a Cyrillic Character Set This memo provides information for the Internet

More information

SCE Training Curriculum for Integrated Automation Solutions Totally Integrated Automation (TIA)

SCE Training Curriculum for Integrated Automation Solutions Totally Integrated Automation (TIA) SCE Training Curriculum for Integrated Automation Solutions Totally Integrated Automation (TIA) Siemens Automation Cooperates with Education TIA Portal Module 060-010 PROFIBUS with Master CPU 315F-2 PNDP

More information

SIMATIC. ET 200SP Product information on the documentation of the ET 200SP distributed I/O system. Preface. Module overview of ET 200SP 1

SIMATIC. ET 200SP Product information on the documentation of the ET 200SP distributed I/O system. Preface. Module overview of ET 200SP 1 Preface Module overview of ET 200SP 1 SIMATIC Supplements to ET 200SP documentation 2 ET 200SP Product information on the documentation of the ET 200SP distributed I/O system Product Information 12/2016

More information

ECHO Process Instrumentation, Inc. Modbus RS485 Module. Operating Instructions. Version 1.0 June 2010

ECHO Process Instrumentation, Inc. Modbus RS485 Module. Operating Instructions. Version 1.0 June 2010 ECHO Process Instrumentation, Inc. Modbus RS485 Module Operating Instructions Version 1.0 June 2010 ECHO Process Instrumentation, Inc. PO Box 800 Shalimar, FL 32579 PH: 850-609-1300 FX: 850-651-4777 EM:

More information

SIMATIC S PRICE LIST

SIMATIC S PRICE LIST SIMATIC S7-1500 PRICE LIST CPU Part number Description Origin 6ES7511-1AK00-0AB0 CPU 1511-1 PN, WORKING MEMORY 150 KB FOR PROGRAM AND 1 MB FOR DATA, 60 NS BIT-PERFORMANCE, list DE 215 865.00 951.50 6ES7513-1AL00-0AB0

More information

SIMATIC Safety Integrated all built in. One controller, one engineering, one communication for standard and fail-safe automation.

SIMATIC Safety Integrated all built in. One controller, one engineering, one communication for standard and fail-safe automation. Engineered with TIA Portal SIMATIC Safety Integrated all built in One controller, one engineering, one communication for standard and fail-safe automation. usa.siemens.com/safety Integrated safety for

More information

SCE Training Curriculum For Integrated Automation Solutions Totally Integrated Automation (TIA)

SCE Training Curriculum For Integrated Automation Solutions Totally Integrated Automation (TIA) SCE Training Curriculum For Integrated Automation Solutions Totally Integrated Automation (TIA) Siemens Automation Cooperates with Education TIA Portal Module 070-010 PROFINET with IO Controller CPU 315F-2

More information

Using the Mobile Panels 2nd generation in Fail-Safe Applications

Using the Mobile Panels 2nd generation in Fail-Safe Applications Application Description 02/2016 Using the Mobile Panels 2nd generation in Fail-Safe Applications WinCC V13 SP1, KTP700F / KTP900F Mobile, STEP 7 Safety Advanced https://support.industry.siemens.com/cs/ww/de/view/103497649

More information

First Data EMV Test Card Set. Version 1.30

First Data EMV Test Card Set. Version 1.30 First Data EMV Test Card Set.30 January, 2018 Disclaimer Information provided in this document describes capabilities available at the time of developing this document and information available from industry

More information

First Data EMV Test Card Set. Version 2.00

First Data EMV Test Card Set. Version 2.00 First Data EMV Test Card Set.00 February, 2018 Disclaimer Information provided in this document describes capabilities available at the time of developing this document and information available from industry

More information

SCE Training Curriculum

SCE Training Curriculum SCE Training Curriculum Siemens Automation Cooperates with Education 05/2017 TIA Portal Module 012-201 Decentral Hardware configuration with SIMATIC S7-1500 and ET 200SP via PROFINET For unrestricted use

More information

ZN-DN312XE-M Quick User Guide

ZN-DN312XE-M Quick User Guide ZN-DN312XE-M Quick User Guide This manual provides instructions for quick installation and basic configuration of your IP device. Step1. Connect cables to IP device Connect required cables to the device

More information

Digital Lighting Systems, Inc.

Digital Lighting Systems, Inc. Digital Lighting Systems, Inc. Four Channel Dry Contacts Relays Switch Pack DMX512 compatible USER'S MANUAL -UM User's Manual - Page 1 GENERAL DESCRIPTION The is a 4-channel DMX-512 compatible electro-mechanical

More information

https://support.industry.siemens.com/cs/ww/en/view/

https://support.industry.siemens.com/cs/ww/en/view/ Using the 2nd- Generation Mobile Panel in a Safety- Related Application WinCC V14, KTP400F, KTP700F, KTP900F, STEP 7 Safety Advanced https://support.industry.siemens.com/cs/ww/en/view/103497649 Siemens

More information

First Data Dual Interface EMV Test Card Set. Version 1.20

First Data Dual Interface EMV Test Card Set. Version 1.20 First Data Dual Interface EMV Test Card Set August, 2016 Disclaimer Information provided in this document describes capabilities available at the time of developing this document and information available

More information

Power module PM-E DC24V/8A RO SIMATIC. ET 200S distributed I/O Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) Preface. Properties.

Power module PM-E DC24V/8A RO SIMATIC. ET 200S distributed I/O Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) Preface. Properties. Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) SIMATIC ET 200S distributed I/O Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 Manual

More information

IEC Contactors. Auxiliary Contact Blocks GENERAL

IEC Contactors. Auxiliary Contact Blocks GENERAL IEC Contactors Auxiliary Contact Blocks GENERAL Description 3RH19 Auxiliary contact blocks The 3RH19 auxiliary contact blocks are available in 1, 2, 3 and 4-pole front mount versions and 2-pole side mount

More information

SIMATIC ET 200SP. siemens.com/et200sp. Simple to use, smaller in size, stronger in performance. Answers for industry. Engineered with TIA Portal

SIMATIC ET 200SP. siemens.com/et200sp. Simple to use, smaller in size, stronger in performance. Answers for industry. Engineered with TIA Portal Engineered with TIA Portal siemens.com/et200sp SIMATIC ET 200SP Simple to use, smaller in size, stronger in performance Intuitive, efficient, proven TIA Portal redefines engineering Answers for industry.

More information

DINALOG A 144 x 36 A1400 Light-Strip Indicator

DINALOG A 144 x 36 A1400 Light-Strip Indicator DINALOG A x 6 A00 Light-Strip Indicator -9-0-0 /.00 Front panel dimensions: x 6 mm Light-strip indicator with 7 high-contrast LEDs Red LED display color Digital display range for portrait format: 999 to

More information

SIMATIC. Safety Engineering in SIMATIC S7. Preface. Overview of Fail-safe Systems. Configurations and Help with Selection. Communication Options 3

SIMATIC. Safety Engineering in SIMATIC S7. Preface. Overview of Fail-safe Systems. Configurations and Help with Selection. Communication Options 3 SIMATIC SIMATIC System Manual Preface Overview of Fail-safe Systems 1 Configurations and Help with Selection 2 Communication Options 3 Safety in F-Systems 4 Achievable Safety Classes with F-I/O 5 Configuring

More information

C1098 JPEG Module User Manual

C1098 JPEG Module User Manual C1098 JPEG Module User Manual General Description C1098 is VGA camera module performs as a JPEG compressed still camera that can be attached to a wireless or PDA host. Users can send out a snapshot command

More information

CIS-331 Final Exam Spring 2015 Total of 115 Points. Version 1

CIS-331 Final Exam Spring 2015 Total of 115 Points. Version 1 Version 1 1. (25 Points) Given that a frame is formatted as follows: And given that a datagram is formatted as follows: And given that a TCP segment is formatted as follows: Assuming no options are present

More information

SIMATIC ET 200SP. Product information on the documentation of the ET 200SP distributed I/O system. Preface. Module overview of ET 200SP

SIMATIC ET 200SP. Product information on the documentation of the ET 200SP distributed I/O system. Preface. Module overview of ET 200SP Preface Module overview of ET 200SP 1 SIMATIC Supplements to ET 200SP documentation 2 ET 200SP Product information on the documentation of the ET 200SP distributed I/O system Product Information 06/2018

More information

Power module PM-E DC24V HF SIMATIC. ET 200S distributed I/O Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) Preface. Properties.

Power module PM-E DC24V HF SIMATIC. ET 200S distributed I/O Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) Preface. Properties. Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) SIMATIC ET 200S distributed I/O Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 Manual 06/2010

More information

Validity 1. Improvements in STEP 7 2. Improvements in WinCC 3 SIMATIC. Readme. Readme

Validity 1. Improvements in STEP 7 2. Improvements in WinCC 3 SIMATIC. Readme. Readme Validity 1 Improvements in STEP 7 2 SIMATIC Improvements in WinCC 3 07/2014 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety,

More information

Gateway Ascii Command Protocol

Gateway Ascii Command Protocol Gateway Ascii Command Protocol Table Of Contents Introduction....2 Ascii Commands.....3 Messages Received From The Gateway....3 Button Down Message.....3 Button Up Message....3 Button Maintain Message....4

More information

SIMATIC. Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules. Preface. Product Overview 1.

SIMATIC. Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules. Preface. Product Overview 1. Preface SIMATIC Distributed I/O System Fail-Safe Engineering SIMATIC Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules Installation and Operating Manual Product

More information

Acquirer JCB EMV Test Card Set

Acquirer JCB EMV Test Card Set Acquirer JCB EMV Test Card Set July, 2017 Powered by Disclaimer Information provided in this document describes capabilities available at the time of developing this document and information available

More information

SIMATIC S7-200 PRICE LIST

SIMATIC S7-200 PRICE LIST BẢNG GIÁ PLC SIEMENS S7-200 SIMATIC S7-200 PRICE LIST Part number SIMATIC S7-200 CLASSIC (GERMANY ORIGIN) SIMATIC S7-200 Central Processing Unit 6ES7211-0AA23-0XB0 6ES7211-0BA23-0XB0 6ES7212-1AB23-0XB0

More information

Intrinsic Safety Control Drawing

Intrinsic Safety Control Drawing s Intrinsic Safety Control Drawing system in total PLC PC Not hazardous area PROFIBUS DP Associated Apparatus Class I, DIV 2, GP A...D Class I, ZN 1, IIC T4 PROFIBUS-DP Ex i Terminating resistor Class

More information

Engineered with TIA Portal. Increase productivity with the ultimate power. Advanced Controllers SIMATIC S with ET 200MP. siemens.

Engineered with TIA Portal. Increase productivity with the ultimate power. Advanced Controllers SIMATIC S with ET 200MP. siemens. Engineered with TIA Portal Increase productivity with the ultimate power Advanced Controllers SIMATIC S7-1500 with ET 200MP siemens.com/s7-1500 Advanced Controllers SIMATIC S7-1500 for complex automation

More information

Siemens Safety Integrated Take a safe step into the future

Siemens Safety Integrated Take a safe step into the future Engineered with TIA Portal Machine Safety Life-Cycle Siemens Safety Integrated Take a safe step into the future Unrestricted / Siemens Industry Inc. 2015. All Rights Reserved. www.usa.siemens.com/safety

More information

Digital Lighting Systems, Inc. CD400-DMX DMX512 Four Channel Dimmer and Switch module

Digital Lighting Systems, Inc. CD400-DMX DMX512 Four Channel Dimmer and Switch module , Inc. DMX512 Four Channel Dimmer and Switch module Input: 5 Amps @ 6-24 VDC Outputs: 5 Amps Maximum each, total 4 outputs 8 Amps Maximum. FRONT BACK USER'S MANUAL -UM User's Manual - Page 1 GENERAL DESCRIPTION

More information

One subset of FEAL, called FEAL-NX, is N round FEAL using a 128-bit key without key parity.

One subset of FEAL, called FEAL-NX, is N round FEAL using a 128-bit key without key parity. FEAL-NX SPECIFICATIONS 1 Introduction 1.1 Outline of the FEAL-NX cipher FEAL, the Fast Data Encipherment Algorithm, is a 64-bit block cipher algorithm that enciphers 64-bit plaintexts into 64-bit ciphertexts

More information

Engineered with TIA Portal. Increase productivity with the ultimate power. Advanced Controllers SIMATIC S with ET 200MP. siemens.

Engineered with TIA Portal. Increase productivity with the ultimate power. Advanced Controllers SIMATIC S with ET 200MP. siemens. Engineered with TIA Portal Increase productivity with the ultimate power Advanced Controllers SIMATIC S7-1500 with ET 200MP siemens.com/s7-1500 Advanced Controllers SIMATIC S7-1500 for complex automation

More information

Validity 1. Improvements in STEP 7 2. Improvements in WinCC 3 SIMATIC. Readme. Readme

Validity 1. Improvements in STEP 7 2. Improvements in WinCC 3 SIMATIC. Readme. Readme Validity 1 Improvements in STEP 7 2 SIMATIC Improvements in WinCC 3 02/2015 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety,

More information

Failsafe Controllers. SIMATIC Safety Integrated Two-Hand Control Panel with Integrated Emergency Stop in Category 4 according to EN 954-1

Failsafe Controllers. SIMATIC Safety Integrated Two-Hand Control Panel with Integrated Emergency Stop in Category 4 according to EN 954-1 Failsafe Controllers SIMATIC Safety Integrated Two-Hand Control Panel with Integrated Emergency Stop in Category 4 according to Functional example no. Preliminary remark The functional examples dealing

More information

Connection of MGB-L1..-AR to Siemens ET 200S

Connection of MGB-L1..-AR to Siemens ET 200S Connection of MGB-L1..-AR to Siemens ET 200S Content Guard locking spring applied power on released according to EN ISO 14119 (closed-circuit current principle)... 2 Components/modules used... 2 EUCHNER...

More information

BẢNG GIÁ PLC SIEMENS S7-200 Áp dụng từ 01/11/ Giá chưa bao gồm thuế VAT

BẢNG GIÁ PLC SIEMENS S7-200 Áp dụng từ 01/11/ Giá chưa bao gồm thuế VAT BẢNG GIÁ PLC SIEMENS S7-200 Áp dụng từ 01/11/2011 - Giá chưa bao gồm thuế VAT NO A I SIMATIC S7-200 CLASSIC (GERMANY ORIGIN) - SIMATIC S7-200 (XUẤT XỨ ĐỨC) SIMATIC S7-200 Central Processing Unit 1 6ES7211-0AA23-0XB0

More information

Connection of CET4-AR to Siemens ET 200S

Connection of CET4-AR to Siemens ET 200S Connection of CET4-AR to Siemens ET 200S Content Guard locking power on applied spring released according to EN ISO 14119 (open-circuit current principle)... 2 Components/modules used... 2 EUCHNER... 2

More information

Product Information Mixed. Configuration ET 200SP / ET 200AL SIMATIC. ET 200SP Product Information Mixed Configuration ET 200SP / ET 200AL.

Product Information Mixed. Configuration ET 200SP / ET 200AL SIMATIC. ET 200SP Product Information Mixed Configuration ET 200SP / ET 200AL. Product Information Mixed Configuration ET 200SP / ET 200AL SIMATIC ET 200SP Product Information Mixed Configuration ET 200SP / ET 200AL Product Information Preface Application planning 1 Mounting 2 Connection

More information

SIMATIC. Distributed I/O ET 200iSP Distributed I/O - Failsafe Module. Preface. Product Overview 1. Configuration and parameter assignment 2

SIMATIC. Distributed I/O ET 200iSP Distributed I/O - Failsafe Module. Preface. Product Overview 1. Configuration and parameter assignment 2 Preface Product Overview 1 SIMATIC Distributed I/O ET 200iSP Distributed I/O - Failsafe Module Operating Instructions Configuration and parameter assignment 2 Addressing and installation 3 Wiring and fitting

More information

ET 200pro Distributed I/O System - Fail- Safe Modules SIMATIC

ET 200pro Distributed I/O System - Fail- Safe Modules SIMATIC ET 200pro Distributed I/O System - Fail- Safe Modules SIMATIC Distributed I/O fail-safe engineering ET 200pro Distributed I/O System - Fail-Safe Modules Operating Instructions Preface Product Overview

More information

Acquirer JCB Dual Interface EMV Test Card Set

Acquirer JCB Dual Interface EMV Test Card Set Acquirer JCB Dual Interface EMV Test Card Set.00 July, 2018 Powered by Disclaimer Information provided in this document describes capabilities available at the time of developing and delivering this document

More information

Digital Lighting Systems, Inc.

Digital Lighting Systems, Inc. , Inc. PD402-DMX Four Channel Dimmer and Switch Packs 4 x 2.5 Amps @ 6VDC to 24 VDC DMX52 compatible DMX52 4 x 2.5 Amps Dimmer Pack C UL US LISTED Digital Lighting Systems, Inc. USER'S MANUAL User's Manual

More information

DBK24. Isolated Digital Output Chassis. Overview

DBK24. Isolated Digital Output Chassis. Overview DBK24 Isolated Digital Output Chassis Overview 1 Power Requirements 2 Hardware Setup 2 Card Connection 2 Card Configuration 3 DaqBook and DaqBoard Connection 4 DaqBoard/2000 Series Board Connection 5 DaqBook

More information

Connection of Encoder Types in Compliance with IEC to DI Modules. STEP 7 Professional V13 S / S / ET 200SP FAQ 07/2015

Connection of Encoder Types in Compliance with IEC to DI Modules. STEP 7 Professional V13 S / S / ET 200SP FAQ 07/2015 FAQ 07/2015 Connection of Encoder Types in Compliance with IEC 61131-2 to DI Modules STEP 7 Professional V13 S7-1200 / S7-1500 / ET 200SP https://support.industry.siemens.com/cs/ww/en/view/109477921 Siemens

More information

Digital Lighting Systems, Inc. PD405-DMX. Four Channel Dimmer and Switch Packs. DMX512 compatible. PD405-DMX-24DC DMX512 4 x 5 Amps Dimmer Pack

Digital Lighting Systems, Inc. PD405-DMX. Four Channel Dimmer and Switch Packs. DMX512 compatible. PD405-DMX-24DC DMX512 4 x 5 Amps Dimmer Pack Digital Lighting Systems, Inc. PD405DMX Four Channel Dimmer and Switch Packs DMX52 compatible PD405DMX24DC DMX52 4 x 5 Amps Dimmer Pack C UL US LISTED www.digitallighting.com Digital Lighting Systems,

More information

Communications guide. Line Distance Protection System * F1* GE Digital Energy. Title page

Communications guide. Line Distance Protection System * F1* GE Digital Energy. Title page Title page GE Digital Energy D90 Plus Line Distance Protection System Communications guide D90 Plus firmware revision:.9x GE publication code: 60-9070-F (GEK-3469) GE Digital Energy 650 Markland Street

More information

ET 200SP distributed I/O system SIMATIC. ET 200SP ET 200SP distributed I/O system. Preface. Product overview. Application planning 2.

ET 200SP distributed I/O system SIMATIC. ET 200SP ET 200SP distributed I/O system. Preface. Product overview. Application planning 2. Preface Product overview 1 SIMATIC ET 200SP Product Information Application planning 2 Installation 3 Connecting 4 Configuring 5 Maintenance 6 Technical specifications 7 Accessories/spare parts 8 Translation

More information

B: Modbus Map and Retrieving Logs

B: Modbus Map and Retrieving Logs B: Modbus Map and Retrieving Logs B.: Introduction Communicator EXT User Manual B.: Modbus Register Map Sections B.3: Data Formats # B.4: Floating Point Values The formula to interpret a Floating Point

More information

S5-115U. Application

S5-115U. Application S5-115U S5-115U Design Central configuration Distributed configuration Note General technical specifications S5-115U Principle of operation Program memory Processor Programming S5-115U Cyclic program execution

More information

6.1 Combinational Circuits. George Boole ( ) Claude Shannon ( )

6.1 Combinational Circuits. George Boole ( ) Claude Shannon ( ) 6. Combinational Circuits George Boole (85 864) Claude Shannon (96 2) Signals and Wires Digital signals Binary (or logical ) values: or, on or off, high or low voltage Wires. Propagate digital signals

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, AC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: AC 85-264 V AC AT 47-63 HZ, PROGRAM/DATA MEMORY: 50 KB General information

More information

General information. Supply voltage. Input current. Encoder supply. Power loss. Memory

General information. Supply voltage. Input current. Encoder supply. Power loss. Memory Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, AC/DC/RELAY, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A, 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: AC 85-264 V AC AT 47-63 HZ, PROGRAM/DATA

More information

SIMATIC S Central processing units

SIMATIC S Central processing units SIMATIC S7-1500 Siemens AG 2013 Overview CPU 1511-1 PN PROFINET IO Controller for operating distributed I/O on PROFINET PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under

More information

Laboratory automation

Laboratory automation Siemens AG 2008 Laboratory automation /2 SIMATIC PCS 7 LAB: Compact control system for the laboratory automation Siemens ST PCS 7.1 Update October 2008 Laboratory automation Siemens AG 2008 Overview PCS

More information