AK-DS2482S-100. Reference manual. Copyright 2016 Artekit Italy All rights reserved
|
|
|
- Abraham Horton
- 6 years ago
- Views:
Transcription
1 AK-DS2482S-100 Reference manual Copyright 2016 Artekit Italy All rights reserved
2 Contents About this document... 3 Revision history... 3 Contact information... 3 Life support policy... 3 Copyright information... 3 Board Description... 4 Hardware overview... 4 Usage... 4 I2C Pull-Up resistors... 4 Activating the Strong Pull-Up (SPU)... 5 Example Connection Using an Arduino UNO... 5 Board dimensions /6 Copyright 2016 Artekit Labs All rights reserved
3 About this document Revision history The table below displays the revision history for the chapters in this manual. Chapter Date Revision Changes made All December First publication Contact information For the latest news, upgrades and information about Artekit products, visit the Artekit web site at For technical support on this product, visit the support page at For additional information about Artekit products, consult the sources below. Information type Technical support Literature Sales Products forum Resource Life support policy Artekit Italy products are not indented or authorized for use as critical components in life support devices or systems without the express written approval from Artekit Labs. Those devices may include devices for supporting or sustaining life, devices for surgical implant into the body or any other device whose failure to perform correctly could result in life support failure. Copyright information This document is copyright 2016 Artekit Labs. All rights reserved. Any person may view, copy, print and distribute this document or any portion of this document for informational purposes only as long as the copyright notice remains included. Copyright 2016 Artekit Labs All rights reserved 3/6
4 Board Description The AK-DS2482S-100 board is an I2C to 1-Wire bridge with bidirectional protocol conversion, used to interface a wide range of 1-Wire devices, like EEPROMs, sensors and the classic ibutton (ex Dallas Button) from Maxim Integrated. Hardware overview Pin name Pin mode Description VCC Power 2.9V to 5.5V DC voltage SCL Output I2C bus clock SDA Input/Output I2C bus data A0 Input Address select 0 - internally pulled down with a 47K resistor A1 Input Address Select 1 - internally pulled down with a 47K resistor 1-Wire Input/Output 1-Wire data bus GND Power Common ground Usage I2C Pull-Up resistors The AK-DS2482S-100 board has two solder jumpers to enable the 4K7 pull-up resistors on the I2C bus lines. The pads are highlighted with red in the following picture. Join the pads with solder to enable the pull-ups. 4/6 Copyright 2016 Artekit Labs All rights reserved
5 Activating the Strong Pull-Up (SPU) If required by connected slave devices, a strong pull-up on the 1-Wire line can be enabled. For example, some EEPROM devices require additional power to operate while powered through the 1-Wire bus. In this case, the DS IC can control an external MOSFET to supply additional power to the bus using a Strong Pull-Up. The AK-DS2482S-100 board includes the external MOSFET on-board, an also has a jumper solder to enable the Strong Pull-Up if required. The SPU pad is highlighted in the picture here below. Join the pad with solder to enable the Strong Pull-Up Example Connection Using an Arduino UNO All 1-wire devices must be connected in parallel. Each device has an unique identification number, and responds only when the device is selected. Since the 1-Wire protocol is only a transport protocol, each 1-Wire slave device has intrinsic communication and protocol data characteristics. Please refer to the slave device datasheet. Copyright 2016 Artekit Labs All rights reserved 5/6
6 Board dimensions 6/6 Copyright 2016 Artekit Labs All rights reserved
GRAVITECH GROUP
GRAVITECH.US uresearch GRAVITECH GROUP Description The I2C-TMP board is a 6-pin CMOS 12- bit digital temperature sensor device using I 2 C bus. There are no external components required. Only two signal
GRAVITECH GROUP
GRAVITECH.US uresearch GRAVITECH GROUP Description The I2C-ADC board is a 14-pin CMOS device that provides 8-CH, 12-bit of Analog to Digital Converter (ADC) using I 2 C bus. There are no external components
GRAVITECH GROUP
GRAVITECH.US uresearch GRAVITECH GROUP Description The I2C-OSC board is an 8-pin CMOS 1KHz 68MHz Programmable Oscillator device using I 2 C bus. There are no external components required. Only two signal
KNJN I2C bus development boards
KNJN I2C bus development boards 2005, 2006, 2007, 2008 KNJN LLC http://www.knjn.com/ Document last revision on December 5, 2008 R22 KNJN I2C bus development boards Page 1 Table of Contents 1 The I2C bus...4
Ethernet + UDP demo. For the AK-MACHX
Ethernet + UDP demo For the AK-MACHX02-7000 Ethernet + UDP demo - For the AK-MACHX02-7000 Contents About this document... 3 Revision history... 3 Contact information... 3 Regarding this document... 3 Copyright
GRAVITECH GROUP
GRAVITECH.US uresearch GRAVITECH GROUP Description The I2C-ACC board is an 8-pin CMOS device that measures acceleration with a full-scale range of +/-2g and sensitivity of 400counts/g @3.0V at 25 C. There
Forza 4 ASCII Game. Demo for the AK-MACHX
Forza 4 ASCII Game Demo for the AK-MACHX02-7000 Contents About this document... 3 Revision history... 3 Contact information... 3 Regarding this document... 3 Copyright information... 3 Forza 4 ASCII Game...
IOX-16 User s Manual. Version 1.00 April Overview
UM Unified Microsystems IOX-16 User s Manual Version 1.00 April 2013 Overview The IOX-16 Arduino compatible shield is an easy way to add 16 additional digital Input/Output (I/O) lines to your Arduino system.
VGA Demo. Forza 4 and Slideshow
VGA Demo Forza 4 and Slideshow VGA Demo - Forza 4 and Slideshow for the AK-MACHX02-7000 Contents About this document... 3 Revision history... 3 Contact information... 3 Regarding this document... 3 Copyright
I2CMux Grove Board 0057-GRV4I2CMux-DSBT/ SF
Features and Benefits: The is an easy to use 4 Channel I2C Multiplexer. The I2C Mux Breakout Board is a quad bidirectional translating switch controlled via the I2C bus. The SCL/SDA controlling fans out
Arduino Uno. Arduino Uno R3 Front. Arduino Uno R2 Front
Arduino Uno Arduino Uno R3 Front Arduino Uno R2 Front Arduino Uno SMD Arduino Uno R3 Back Arduino Uno Front Arduino Uno Back Overview The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet).
USB-to-I2C Basic. Hardware User s Manual.
USB-to-I2C Basic Hardware User s Manual http://www.i2ctools.com/ Information provided in this document is solely for use with the USB-to-I2C product from SB Solutions, Inc. SB Solutions, Inc. reserves
Interfacing the NM24C16 Serial EEPROM to the microcontroller. Interfacing the NM24C16 Serial EEPROM to the 8031 Microcontroller AN-957
Interfacing the NM24C16 Serial EEPROM to the 8031 Microcontroller INTRODUCTION This applications note describes an interface between the National Semiconductor NM24C16 serial EEPROM and an 8031 microcontroller
Embedded Workshop 10/28/15 Rusty Cain
2 IC Embedded Workshop 10/28/15 Rusty Cain Set up for Workshop: Please Sign in on Sheet. Please include your email. While you are waiting for the Workshop to begin 1. Make sure you are connected to the
EPT-200TMP-TS-U2 TMP102 Temperature Sensor Docking Board Data Sheet
EPT-2TMP-TS-U2 TMP12 Temperature Sensor Docking Board Data Sheet This docking board is based on the TMP12 Temperature Sensor chip from Texas Instruments. It can measure the ambient temperature between
ARDUINO MEGA ADK REV3 Code: A000069
ARDUINO MEGA ADK REV3 Code: A000069 OVERVIEW The Arduino MEGA ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones, based on the MAX3421e
keyestudio Keyestudio MEGA 2560 R3 Board
Keyestudio MEGA 2560 R3 Board Introduction: Keyestudio Mega 2560 R3 is a microcontroller board based on the ATMEGA2560-16AU, fully compatible with ARDUINO MEGA 2560 REV3. It has 54 digital input/output
ARDUINO UNO REV3 Code: A000066
ARDUINO UNO REV3 Code: A000066 The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can
Arduino ADK Rev.3 Board A000069
Arduino ADK Rev.3 Board A000069 Overview The Arduino ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e
VL6180 Hookup Guide. Introduction. Board Overview - VL6180 Breakout. Covered in this Tutorial. Suggested Reading
Page 1 of 5 VL6180 Hookup Guide CONTRIBUTORS: CASEYTHEROBOT Introduction The VL6180 is a Time of Flight (TOF) distance sensor with an I2C ( Wire ) interface. This Hookup Guide will cover two boards. The
ARDUINO MEGA 2560 REV3 Code: A000067
ARDUINO MEGA 2560 REV3 Code: A000067 The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D
ARDUINO UNO REV3 SMD Code: A The board everybody gets started with, based on the ATmega328 (SMD).
ARDUINO UNO REV3 SMD Code: A000073 The board everybody gets started with, based on the ATmega328 (SMD). The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output
BV4531U. I2C or Serial 6 Way Relay
BV4533 Date February 2018 11 Feb. 2018 Firmware Revision 1.0.4 Preliminary 1.1.0 Serial Updated I2C or Serial 6 Way Relay 3 Sep. 2018 1.1.0 I2C corrections, trigger is not used Introduction This is an
MACHINE BREAKDOWN DETECTION SYSTEM
MACHINE BREAKDOWN DETECTION SYSTEM Yogita P. Desale 1 1 student, Electronics and telecommunication Department, MCOERC, Maharashtra, ABSTRACT Industrial situation is very critical and is subject to several
AK-STM32-ETH Development Board
AK-STM32-ETH Development Board Reference manual Copyright 2011 Artekit Italy All rights reserved Contents About this document... 3 Revision history... 3 Contact information... 3 Life support policy...
Markus Hintermann Global Technical Marketing / Sales Manager at Micro Crystal
Markus Hintermann Global Technical Marketing / Sales Manager at Date: July 2016 Revision N : 1.0 1/8 Headquarters: AG Muehlestrasse 14 CH-2540 Grenchen Switzerland Tel. Fax Internet Email +41 32 655 82
KNJN I2C bus development boards
KNJN I2C bus development boards 2005, 2006, 2007, 2008 fpga4fun.com & KNJN LLC http://www.knjn.com/ Document last revision on January 1, 2008 R12 KNJN I2C bus development boards Page 1 Table of Contents
Prototyping Module Datasheet
Prototyping Module Datasheet Part Numbers: MPROTO100 rev 002 Zenseio LLC Updated: September 2016 Table of Contents Table of Contents Functional description PROTOTYPING MODULE OVERVIEW FEATURES BLOCK DIAGRAM
MedeaWiz 8X78. Input / Output Expander. FW version 1.0. PCB version 1.0. Manual version Note that this manual may change periodically
MedeaWiz 8X78 Input / Output Expander FW version 10 PCB version 10 Manual version 110 Note that this manual may change periodically Please go to wwwmedeawizcom for the latest version 0 P a g e Table of
AMS 5812 OEM pressure sensor with an analog and digital output
Digital signal conditioning is becoming increasingly common in sensor technology. However, some sensor system states can be monitored more easily using analog values. For redundancy and system safety reasons
Using Sensors with the RoboRIO
Using Sensors with the RoboRIO Jeff Bernardis jeff.bernardis@gmail.com David Zhang david.chao.zhang@gmail.com A copy of this presentation is available at: https://drive.google.com/file/d/1sjlpsrm8wbguehgyblcopmrnw2qsmxkf/view?usp=sharing
Getting Started with InnoSwitch TM 3-Pro Code Library using Arduino
Title Author Document Number Getting Started with InnoSwitch TM 3-Pro Code Library using Arduino Applications Engineering Department Application Note 77 (AN-77) Date September 6, 2018 Revision 1.0 Summary
Display Real Time Clock (RTC) On LCD. Version 1.2. Aug Cytron Technologies Sdn. Bhd.
Display Real Time Clock (RTC) On LCD PR12 Version 1.2 Aug 2008 Cytron Technologies Sdn. Bhd. Information contained in this publication regarding device applications and the like is intended through suggestion
Application Note. SLG46824/6 MTP Arduino Programming Example AN-CM-255
Application Note SLG46824/6 MTP Arduino Programming Example AN-CM-255 Abstract In this application note, we use the Arduino MTP Programmer sketch to program an SLG46824/6. Through analyzing the code, a
SILICON MICROSTRUCTURES
Digital Communication with SM5800 Series Parts OVERVIEW The SM5800 series pressure product offers the corrected pressure output in both analog and digital formats. Accessing the analog output is an easy
1-Wire Current Loop Interface. User Manual
User Manual February 2015 Table of Contents 1 Features 3 2 Technical Specifications 3 3 4 Board Overview 4 1-Wire Terminal Block Connector (K2) 4 1-Wire RJ45 Connectors (K3, K4) 5 Current Loop Connector
DS1676 Total Elapsed Time Recorder, Erasable
www.dalsemi.com Preliminary DS1676 Total Elapsed Time Recorder, Erasable FEATURES Records the total time that the Event Input has been active and the number of events that have occurred. Volatile Elapsed
The DS2703 EV kit evaluation software gives the user complete control of all SHA-1 functions of the DS2703 as well as the various other commands.
19-4832; Rev 10/09 www.maxim-ic.com FEATURES Demonstrates the capabilities of the DS2703 Battery Pack Authentication IC with SHA-1 Security, including: Secure Challenge and Response Authentication using
Getting started with X-NUCLEO-53L1A1 long distance ranging ToF sensor expansion board based on VL53L1X for STM32 Nucleo
User manual Getting started with X-NUCLEO-53L1A1 long distance ranging ToF sensor expansion board based on VL53L1X for STM32 Nucleo Introduction This document provides detailed hardware information on
Grove Digital Extender 0059-GRVDE-DSBT/SF
Features and Benefits: The board is an easy to use I2C controlled board that provides 8 Grove Digital I/O ports. 8 Connectors I2C controlled 3 total Grove I2C Connectors (2 spare) 8 GPIO pins 3.3V and
DS1870 LDMOS BIAS CONTROLLER EV KIT
GENERAL DESCRIPTION The DS1870 EV Kit provides hardware and Window s compatible software to simplify the evaluation of the DS1870 LDMOS Bias Controller. FEATURES Includes test socket for solderless connectivity
ARDUINO LEONARDO WITH HEADERS Code: A000057
ARDUINO LEONARDO WITH HEADERS Code: A000057 Similar to an Arduino UNO, can be recognized by computer as a mouse or keyboard. The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet).
ECE383: Microprocessors Lab 9 Analog-to-Digital and Digital-to-Analog Conversion with I 2 C Serial EEPROM Data Storage
ECE383: Microprocessors Lab 9 Analog-to-Digital and Digital-to-Analog Conversion with I 2 C Serial EEPROM Data Storage Goals: The goals of this lab are to introduce students to a PIC24-based hardware system
Manual iaq-engine Indoor Air Quality sensor
Manual iaq-engine, Version 2.0 May 2011 (all data subject to change without notice) Manual iaq-engine Indoor Air Quality sensor Digital and analog I/O SMD type package Product summary iaq-engine is used
USB-to-I2C. Professional Hardware User s Manual.
USB-to-I2C Professional Hardware User s Manual https://www.i2ctools.com/ Information provided in this document is solely for use with the USB-to-I2C Professional product from SB Solutions, Inc. SB Solutions,
DS1682 Total-Elapsed-Time Recorder with Alarm
www.maxim-ic.com GENERAL DESCRIPTION The DS1682 is an integrated elapsed-time recorder containing a factory-calibrated, temperaturecompensated RC time base that eliminates the need for an external crystal.
Grove - Mini I2C Motor Driver v1.0
Grove - Mini I2C Motor Driver v1.0 Introduction 3.3V 5.0V I2C This Grove - MIni I2C motor driver includes two DRV8830. The DRV8830 provides an integrated motor driver solution for battery-powered toys,
USB-to-I2C. Ultra Hardware User s Manual.
USB-to-I2C Ultra Hardware User s Manual https://www.i2ctools.com/ Information provided in this document is solely for use with the USB-to-I2C Ultra product from SB Solutions, Inc. SB Solutions, Inc. reserves
GT24C02. 2-Wire. 2Kb Serial EEPROM (Smart Card application)
ADVANCED GT24C02 2-Wire 2Kb Serial EEPROM (Smart Card application) www.giantec-semi.com a0 1/19 Table of Content 1 FEATURES...3 2 DESCRIPTION...4 3 PIN CONFIGURATION...5 4 PIN DESCRIPTIONS...6 5 BLOCK
ACE24AC64 Two-wire Serial EEPROM
Description The ACE24AC64 series are 65,536 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 8192 words of 8 bits (one byte) each. The
DS2782EVKIT+ Standalone Fuel Gauge IC Evaluation Kit
19-4854; Rev 9/09 www.maxim-ic.com FEATURES Demonstrates the capabilities of the DS2782 Standalone Fuel Gauge, including: Estimation of available capacity for Li+ cells Voltage measurement Current measurement
DS1855 Dual Nonvolatile Digital Potentiometer and Secure Memory
Dual Nonvolatile Digital Potentiometer and Secure Memory FEATURES Two Linear Taper Potentiometers DS1855-010 (One 10kΩ, 100 Position and One 10kΩ, 256 Position) DS1855-020 (One 10kΩ, 100 Position and One
USER MANUAL EXPERIENCE INCREDIBLE PERFORMANCE V2.3
USER MANUAL EXPERIENCE INCREDIBLE PERFORMANCE V2.3 CONTENTS 1 INTRODUCTION... 3 2 INTERFACE DESIGN... 4 2.1 Connectivity... 5 2.2 Analog Interface... 6 2.3 I 2 C Interface... 7 2.4 I 2 C Operations...
Level Shifter. for. Hardware User s Manual.
Level Shifter for USB-to to-i2c Hardware User s Manual https://www.i2ctools.com/ Information provided in this document is solely for use with the I2C and SPI Level Shifter from SB Solutions, Inc. SB Solutions,
ARDUINO LEONARDO ETH Code: A000022
ARDUINO LEONARDO ETH Code: A000022 All the fun of a Leonardo, plus an Ethernet port to extend your project to the IoT world. You can control sensors and actuators via the internet as a client or server.
Part Number Density Product Type Operation Temperature. W25Q80NESNIG 8Mb 1.2V Serial NOR Flash Memory Industrial (-40 C to +85 C)
1. INTRODUCTION This describes how to use the. The mbed enabled MCU board, which has an Arduino UNO R3 compatible terminal, is used in this description. 2. GENERAL DESCRIPTION The from Winbond Electronics
Web Site: Forums: forums.parallax.com Sales: Technical:
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
MC20902-EVB. MC20902 D-PHY 5-Channel Master Transmitter Evaluation Board User's Guide PRELIMINARY DATASHEET. Version February 2014.
C O N F MC20902 D-PHY 5-Channel Master Transmitter Evaluation Board User's Guide I D E N PRELIMINARY DATASHEET Version 1.00 T February 2014 I Meticom GmbH A L Meticom GmbH Page 1 of 14 Revision History
User-configurable Resolution. 9 to 12 bits (0.5 C to C)
AT30TS75A 9- to 12-bit Selectable, ±0.5 C Accurate Digital Temperature Sensor DATASHEET See Errata in Section 12. Features Single 1.7V to 5.5V Supply Measures Temperature -55 C to +125 C Highly Accurate
Grove - Multichannel Gas Sensor
Grove - Multichannel Gas Sensor Introduction 3.3V 5.0V I2C Grove Multichannel Gas sensor is a environment detecting sensor with a built in MiCS-6814 which can detect many unhealthful gases, and three gases
4X4 Driver Shield Manual
3/31/2012 4X4 Driver Shield Manual High current, high side switching for Arduino Logos Electromechanical 4X4 Driver Shield Manual High current, high side switching for Arduino Introduction The Logos Electromechanical
Symphony SoundBite Reference Manual
Symphony SoundBite Reference Manual Document Number: SNDBITERM Rev. 2.0 09/2008 Contents Section 1, Introduction page 2 Section 2, Functional Blocks page 3 Section 3, Configuration and Connections page
Mayhew Labs. Extended ADC Shield User Manual
Table of Contents: Introduction 1 Hardware Description 1 Pin Descriptions 2 Setting the SPI communication level 2 Setting User Defined pin usage 2 Freeing Up Pin 9 (BUSY) 2 Installing Input Filtering Capacitors
GT24C256 2-WIRE. 256K Bits. Serial EEPROM
GT24C256 2-WIRE 256K Bits Serial EEPROM Copyright 2013 Giantec Semiconductor Inc. (Giantec). All rights reserved. Giantec reserves the right to make changes to this specification and its products at any
DS WIRE INTERFACE 11 DECOUPLING CAP GND
Rev ; 4/3 Hex Nonvolatile Potentiometer with General Description The contains six 256-position nonvolatile (NV) potentiometers, 64 bytes of NV user EEPROM memory, and four programmable NV I/O pins. The
Description: BME250 Multi Sensor + Indoor Air Quality (Humidity / Temperature / Pressure Sensor, VOCs, C02)
Device: MOD-1023 This document version: v1 Matches module version: v3 [29 June 2015] Document revision date: 22 September 2015 Description: BME250 Multi Sensor + Indoor Air Quality (Humidity / Temperature
ZSSC4151 Evaluation Kit Hardware Manual
Important Notes Restrictions in Use IDT s ZSSC4151 SSC Evaluation Kit, consisting of the SSC Communication Board (SSC CB), ZSSC415x/6x/7x Evaluation Board (SSC EB), Sensor Replacement Board (SSC RB), and
Quad Power Management Board
Features and Benefits: Great for Robotics Projects I2C controlled 4 Independent Solid State Relays each with status LED Each is able to switch 20V and 2.3A 4 Additional GPIOs 4 interrupts available Software
WeatherPiArduino Weather Board
Features and Benefits: The is an interface board for connecting a full featured, customizable board for Raspberry Pi and Arduino projects. It contains a built in I2C BMP280 Barometer/Temperature sensor
Bus & Signal Processing
Prototyping Electronic Devices Class 12 Bus & Signal Processing Deqing Sun, Peiqi Su ITP, Fall, 2018 What is bus 2 Differences between Bus and Cab? 3 Differences between Bus and Cab Bus is capable to carry
8051 Intermidiate Development Board. Product Manual. Contents. 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help
8051 Intermidiate Development Board Product Manual Contents 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help 1. Overview 2. Features The board is built on a high quality FR-4(1.6
WeatherPiArduino Weather Board
Product Specification Features and Benefits: Provides an excellent interface for a Weather! The is an interface board for connecting a full featured, customizable board for Raspberry Pi and Arduino projects.
3. The circuit is composed of 1 set of Relay circuit.
Part Number : Product Name : FK-FA1420 ONE CHANNEL 12V RELAY MODULE This is the experimental module for a relay controller as the fundamental controlling programming. It is adaptable or is able to upgrade
DS2401 Silicon Serial Number
Silicon Serial Number www.maxim-ic.com FEATURES Upgrade and drop-in replacement for DS2400 Extended 2.8 to 6.0 voltage range Multiple s can reside on a common 1-Wire Net Unique, factory-lasered and tested
ARDUINO MICRO WITHOUT HEADERS Code: A000093
ARDUINO MICRO WITHOUT HEADERS Code: A000093 Arduino Micro is the smallest board of the family, easy to integrate it in everyday objects to make them interactive. The Micro is based on the ATmega32U4 microcontroller
Adafruit BME280 Humidity + Barometric Pressure + Temperature Sensor Breakout
Adafruit BME280 Humidity + Barometric Pressure + Temperature Sensor Breakout Created by lady ada Last updated on 2017-01-11 09:01:04 PM UTC Guide Contents Guide Contents Overview Pinouts Power Pins: SPI
2-Wire, 5-Bit DAC with Three Digital Outputs
Rev 1; 6/4 2-Wire, 5-Bit DAC with Three Digital Outputs General Description The is a 5-bit digital-to-analog converter (DAC) with three programmable digital outputs. The communicates through a 2-wire,
ic-msb EVAL MSB1D EVALUATION BOARD DESCRIPTION
Rev A2, Page 1/7 ORDERING INFORMATION Type Order Designation Description and Options Evaluation Board ic-msb EVAL MSB1D ic-msb Evaluation Board ready to operate, accessible through GUI via PC adapter Software
ACE24AC128 Two-wire Serial EEPROM
Description The ACE24AC128 series are 131,072 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 16,384 words of 8 bits (one byte) each.
Adafruit SHT31-D Temperature & Humidity Sensor Breakout
Adafruit SHT31-D Temperature & Humidity Sensor Breakout Created by lady ada Last updated on 2016-09-16 07:45:55 PM UTC Guide Contents Guide Contents Overview Pinouts Power Pins: I2C Logic pins: Other Pins:
LM53X Development and Evaluation Product Family
Development and Evaluation Family Revised Datasheet Version 13/MAR/2018 1.0 Overview The is the development and evaluation product family for the LM930 / LM931 Bluetooth low energy module. A great starting
Gyroscope Module 3-Axis L3G4200D (#27911)
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
Propeller Project Board USB (#32810)
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
1-Wire Mini Host. User Manual
March 015 Table of Contents 1 Features Technical Specifications Installation 1-Wire Host System Extension Standalone Board Overview 1-Wire Connector (K1-K8) Connector for IC Master (K9) 5 5 6 6 5 Software
I2C-AO112DIx I2C-Bus 4-20mA Analog Output Boards Din-Rail supports
I2C-AO2DIx I2C-Bus 4-2mA Analog Output Boards Din-Rail supports Features ingle Channel Analog Output 2-wire Current Loop 4-2 ma 2 Bits Digital to Analog Converter MCP4725 I2C-Bus Interfacing Khz, 4Khz
8051 Basic Development Board. Product Manual. Contents. 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help
8051 Basic Development Board Product Manual Contents 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help 1. Overview 2. Features The board is built on a high quality FR-4(1.6
ACE24AC16B Two-wire Serial EEPROM
Description The ACE24AC16B is 16,384 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 2,048 words of 8 bits (1 byte) each. The devices
DS2401 Silicon Serial Number
Silicon Serial Number www.maxim-ic.com FEATURES Upgrade and drop-in replacement for DS2400 Extended 2.8 to 6.0 voltage range Multiple s can reside on a common 1-Wire Net Unique, factory-lasered and tested
Application Note: AZD025 IQ Switch - ProxSense TM Series I2C Example Code for the IQS222
1. Introduction Application Note: AZD025 IQ Switch - ProxSense TM Series I2C Example Code for the IQS222 The IQS222 uses a 100 KHz bi-directional 2-wire bus and data transmission protocol. The serial protocol
Thunder Board 0240-THNDRBRD-DSBT
! Product Specification Features and Benefits: The is an Arduino and Raspberry Pi Grove compatible breakout board with a full set of connectors. No external antennas required! It is designed for use in
Grove Lightning Detector 0219-MOD1016G-01
Features and Benefits: The is an Arduino and Raspberry Pi Grove compatible breakout board with a full set of connectors. No external antennas required! It is designed for use in Low Power applications
DS1810 5V EconoReset with Push-Pull Output
5V EconoReset with Push-Pull Output www.maxim-ic.com FEATURES Automatically restarts a microprocessor after power failure Maintains reset for 150 ms after V CC returns to an in-tolerance condition Reduces
Tutorial for I 2 C Serial Protocol
Tutorial for I 2 C Serial Protocol (original document written by Jon Valdez, Jared Becker at Texas Instruments) The I 2 C bus is a very popular and powerful bus used for communication between a master
AXE033 SERIAL/I2C LCD & CLOCK
AXE033 SERIAL/I2C LCD & CLOCK The serial LCD and clock module allows microcontroller systems (e.g. PICAXE) to visually output user instructions or readings, without the need for a computer. This is especially
ST19NP18-TPM-I2C Trusted Platform Module (TPM) with I²C Interface Features
Trusted Platform Module (TPM) with I²C Interface Data brief Features Single-chip Trusted Platform Module (TPM) Embedded TPM 1.2 firmware I²C communication interface (Slave mode) Architecture based on ST19N
Description: 4x 7 segment display module with decimals and colon
Device: DSP-7S04B This document Version: 1.0 Date: 19 October 2013 Description: 4x 7 segment display module with decimals and colon Matches module hardware version: [30 Sep 2013 v3] Table of Contents DSP-7S04B
Thermo 6 click PID: MIKROE-2769
Thermo 6 click PID: MIKROE-2769 Thermo 6 click is a precise and versatile ambient temperature measurement click board, based on the Maxim Integrated MAX31875 temperature sensor. This sensor has a great
DS1821 Programmable Digital Thermostat and Thermometer
ma www.maxim-ic.com FEATURES Requires no external components Unique 1-Wire interface requires only one port pin for communication Operates over a -55 C to +125 C (-67 F to +257 F) temperature range Functions
AVR Intermediate Development Board. Product Manual. Contents. 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help
AVR Intermediate Development Board Product Manual Contents 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help 1. Overview 2. Features The board is built on a high quality FR-4(1.6
Winbond ACPI-STR Controller W83305S W83305G
Winbond ACPI-STR Controller W83305S W83305G W83305S Data Sheet Revision History PAGES DATES VERSION VERSION ON WEB MAIN CONTENTS 1 Apr./06 0.5 N.A. All version before 0.5 are for internal use only Please