Stepper Motor. Vcc 3.3~5V User MCU Direc on Pulse Enable. Vcc DIR STP

Size: px
Start display at page:

Download "Stepper Motor. Vcc 3.3~5V User MCU Direc on Pulse Enable. Vcc DIR STP"

Transcription

1 Miniature size 2.mm x 2.mm x 1.5mm Integral design to fit motors, work standalone as well Wide range input voltage A / A / - 8A adjustable phase current 1 to 16th micro stepping Automatic Current Reduction Dual full H-bridge with control Enable/shutdown input for power saving Optical-isolated inputs Die-cast aluminum enclosure UIM20XX Miniature Drivers are miniature, high performance stepper motor drivers. They can be mounted onto NEMA 17 / 2 / / 2 series stepper motor seamlessly through corresponding flanges. The thickness of these driver is less than 15 mm. The UIM2002 supplies 0-2A adjustable phase current, the UIM 200 supplies A adjustable phase current and the UIM2008 supplies - 8A adjustable current. Their mixed-decay current control reduces the back-emf effect under high motor speed and improves the performance. Except that UIM2002 takes 10-5 input, UIM20XX series drivers work on 12-0 input. The enclosure is made of die-cast aluminum which provides a rugged, durable protection and improves the heat dissipation. Supply Voltage 12V ~ 0(UIM2002 is 10V ~ 5) Motor Output Current Adjustable 2A/A/8A 1, 1/2, 1/, 1/8, 1/16 micro-stepping Insulation Resistance >100MΩ Dielectric Strength 0.5KV in one minute Parallel Signals -wire interface Temperature -0 ~ +85 G Max 12 ~ 0 Vcc.~5V User MCU Direcon Pulse Enable 1 V+ 2 GND UIM20XX Vcc 500Ω DIR 5 STP 6 EN

2 Size 2.mm x 2.mm x 1.5mm Fit onto motors seamlessly Die-cast aluminum enclosure Wide supply voltage 12 ~ 0 Max output current 2A/A/8A, instruction adjustable Full step to 16th micro-stepping resolution Dual full H-bridge with control Accurate micro-stepping and current control RS22 three-wire serial communication Max baud rate bps Hardware DSP, 6bit calculation precision Linear/non-linear acceleration/deceleration S-curve, PT / PVT displacement control Support quadrature encoder, closed loop control 2 sensor input ports 8 programmable real-time event-based change notifications 5 programmable actions triggered by 6 sensor events UIM21XX controllers are miniature stepper motor controllers with RS22 control interface. The user device controls the UIM21XX through RS22 using ASCII coded instructions. UIM21XX controllers support open-loop and quadrature encoder (QE) closed-loop control. The UIM21XX architecture comprises communication, basic motion control, absolute position counter, QE interface and real-time event change notification modules. Embedded 6-bit calculation precision DSP controller guarantees the real-time control process. Furthermore, there are optional advanced modules: Advanced Motion Module, QE Based Closed-Loop Module and Sensor Module. With UIM21 Advanced Motion, selected NEMA 17/2 motors can ramp up to 000 RPM in 0.25 seconds. UIM21controllers can be mounted onto NEMA17/2//2 series stepper motor through adapting flanges. Enclosure is made of die-cast aluminum to provide a rugged durable protection and improves the heat dissipation. Supply Voltage 12V ~ 0 Motor Output Current Insulation Resistance Dielectric Strength Adjustable 2A/A/8A 1, 1/2, 1/, 1/8, 1/16 micro-stepping >100MΩ 0.5KV in one minute V+ GND RX TX Communication protocol RS22 Wiring Method -wire:tx, RX, GND Baud Rate MAX bps, Instruction adjustable Sensor1 Sensor GND AG S1 S2 UIM21XX Temperature -0 ~ +85 G Max PIN 2 to RX (terminal ) PIN to TX (terminal ) PIN 5 to GND (terminal 5)

3 Size 2.mm x 2.mm x 1.5mm Fit onto motors seamlessly Die-cast aluminum enclosure UIM22XX are miniature stepper motor controllers with CAN2.0B networking capability. Through the CAN-RS22 converter (UIM2501), user device can command multiple UIM22 controllers through RS22 using ASCII coded instructions. UIM22XX controllers support open-loop and quadrature encoder (QE) closed-loop control. The UIM22XX architecture comprises communication, basic motion control, absolute position counter, QE interface and real-time event change notification modules. Embedded 6-bit calculation precision DSP controller guarantees the realtime control process. Furthermore, there are optional advanced modules: Advanced Motion Module, QE Based Closed-Loop Module and Sensor Module. With UIM22XX Advanced Motion, selected NEMA 17/2 motors can ramp up to 000 RPM in 0.25 seconds.uim22xxcontrollers can be mounted onto NEMA17/2//2 series stepper motor through adapting flanges. Enclosure is made of die-cast aluminum to provide a rugged durable protection and improves the heat dissipation. Wide supply voltage 12-0 Max phase current 2A/A/8A, instruction adjustable Full step to 16th micro-stepping resolution Dual full H-bridge with control 2-wire interface Max 1M bps operation, long distance Differential bus, high noise immunity Max 100 nodes Hardware DSP, 6-bit calculation precision Linear/non-linear acceleration/deceleration S-curve, PT, PVT displacement control Support quadrature encoder, closed loop control sensor inputs, 1 TTL output 12 programmable real-time event-based change notifications 5 programmable actions triggered by 8 sensor events Supply Voltage Motor Phase Current Insulation Resistance Dielectric Strength 12V - 0 Max 2A/A/8A, instruction adjustable Full-step, 1/2, 1/, 1/8, 1/16 step >100MΩ 0.5KV in one minute Protocol Wiring method CAN bus driver Active CAN 2.0B 2-wire, Supports 1 Mb/s operation ISO standard physical layer requirements Suitable for 12V and 2V systems Up to 100 nodes can be connected Temperature G Max 6 0V DC Supply UIM DB9 Port RS22 Cable UIM250 UIM22xx Motor #1 120Ω Twist Wire Pair RS V DC Supply Sensor 1 Sensor 2 Sensor UIM22xx Motor #2 1 V+ 2 GND 5 AG 6 S1 7 S2 8 S 9 P TTL Output 12-0 UIM22XX Room Factory UIM22xx 120 Ohm Motor #100

4 Size 2. mm x 2. mm x 1.5 mm(uim202) Size 25 mm x 18 mm x 2.5 mm(uim201) Fit onto motors seamlessly(uim202) Die-cast aluminum enclosure(uim202) UIM2XX stepper motor controllers are series of microprocessor embedded, voltage control, miniature stepper motor controller. UIM201 is a sub-miniature controller, whose land pattern is standard DIP18 (0.6" width) and can be mounted onto user PCB directly. With the UIM2XX controller, motor speed can be adjusted through an analog voltage. There are ways to generate the said analog voltage: 1) use the on-board trimmer, 2) use user potentiometer or ) direct input a voltage. Run/stop, direction, high/low speed range and, enable/disable can be controlled simply by shorting the corresponding terminal to the ground. UIM2XX controllers can run the motor without user device. UIM202 provides 0-2A adjustable phase current, and UIM201 provides 0-1A adjustable phase current. UIM202 can be mounted onto NEMA 17 / 2 series stepper motor seamlessly through adapting flanges. The enclosure is made of die-cast aluminum which provides a rugged durable protection and improves the heat dissipation. UIM202 Supply Voltage 10V - 5 Motor Output Current Adjustable 0-1A / 0-2A output current 1/8 (fixed) Speed Range 10pps pps, i.e., 0.2rpm - 900rpm 10-5 input voltage, Max 1A / 2A adjustable phase current Speed control through on-board trimmer RPM Speed control through user potentiometer RPM Speed control through 0-5V voltage input RPM Switch control start/stop, direction, enable Automatic power saving 10 ~ 5 Enable Run/Stop High/Low Speed Range Direcon 5V Reference Voltage Speed Voltage 1 2 V+ GND UIM202 ENA ON/OFF 5 H/L 6 DIR 7 Vref 8 SPD Speed Adjusting Trimmer Communication Speed On-Board Trimmer Ext. Potentiometer Direct Voltage -wire interface: Run/Stop, Direction, Enable/ Disable, H/L Speed Shift 10KΩ 10KΩ 0-5 Temperature G Max 10 ~ 5 Enable Run/Stop Direcon Speed Voltage High/Low Speed range 5V Reference Voltage V+ GND UIM201 ENA ON/OFF DIR SPD H/L Vref Speed Adjusting Trimmer

5 Embedded high-performance DSP processor RS22 three-wire serial communication Max baud rate bps The UIM2501 RS22-CAN Converter is used in conjunction with UIM22XX stepper motor controller to provide a RS22 interface on the user side and a CAN bus interface on the motor side (factory side). With the UIM2501, user can benefit from the advantages of the CAN network and the simplicity of RS22 protocol, there is no need to deal with the complicated CAN protocol, no worry about the communication distance and noise immunity. One UIM2501 controller can network with up to 100 UIM22XX controllers. Interfacing the UIM2501 is simple, intuitive and fault tolerating. Users are not required to have stepper motor driving or CAN protocol knowledge. UIM2501 is compact in size. The enclosure is made of die-cast aluminum to provide a rugged durable protection and improves the heat dissipation. Supply Voltage 6V - 0 Current Consumption Max 100mA 2-wire interface 1 Mega bit/sec operation, long distance Differential data bus, high noise immunity Wide supply voltage range 6 ~ 0 66.mm x 8mm x 18mm UIM2501 电机 # 1 RS22 UIM22xx 12-0 UIM22xx 12-0 UIM22xx 电机 # 2 Room 电机 # 100 Factory 120Ω To User Device RS22 Wiring Method DB9 Female Connector RS22 Baud Rate MAX bps To UIM22 Active CAN 2.0B CAN wiring Method 2-Wire,, CAN bus Supports 1 Mb/s operation ISO standard physical layer requirements Up to 100 nodes can be connected Temperature G Max

6 UIM2XXX series /Drivers comprise hardware and firmware. Based on the customer's needs, high end controllers (i.e. UIM21 and UIM22) are composed of basic system plus optional function modules, to reduce the price as much as possible. Parallel Signal Optical Isolator Motor Diver Harware Communication Normal Motion Change Notify Pulse Generator Auto Current Micro Parallel Processor Signal RS22 Instruction CAN2.0B Network Speed 20XX User Pulse Voltage 2XX Voltage PT/PVT Position Feedback Event/Status Change Notify RS22 21XX Instruction CAN Network 22XX Instruction Note: + XX is the peak current code. XX = 01 means 1 Amp, XX = 02 means 2 Amp, XX = 0 means Amp, XX = 08 means 8 Amp. Affix Speed Linear Non-Linear Acceleration Advanced Motion Module S-Curve Position Tracking (PT) Position Velocity Tracking(PVT) RS22 -M CAN Network -M UIM2002 UIM200 UIM2008 UIM201 UIM202 UIM21XX(XX = 02,0 or 08) UIM21XX-M UIM21XX-M-S UIM21XX-M-S-E UIM21XX-S-E Affix Sensor Input Module Port Event-driving Quantity Quad-Encoder Interface RS22 -S 2 0 CAN Network -S 2 0 TTL Output Module Port Event-driving Quantity Instruction -SP 1 Affix Quad-Encoder Moon Module Closed-Loop RS22 -E CANNetwork -E UIM UIM22XX(XX = 02,0 or08) UIM22XX-M UIM22XX-M-S UIM22XX-M-SP UIM22XX-M-S-E UIM22XX-M-SP-E UIM22XX-S-E UIM22XX-SP-E Optional : E = Encoder based closed-loop Module Optional : S = 2 sensor inputs, SP = sensor inputs + 1 TTL output Note: + The Sensor Input Module is a pre-requisition. Optional : M = Advanced Motion Module Max Output Current: 01 = 1A, 02 = 2A, 0 = A, 08 = 8A Series Code: 20 = Parallel Signal, 21 = RS22, 22 = CAN Networking, 2 = Voltage Speed :UIM = Note: If not select, the code box can be deleted, as shown in the examples. These optional modules only apply to UIM21XX and UIM22XX series products. Examples: UIM220 UIM2208-M-SP-E UIM210-S-E UIM2008

User Manual UIM24302A/B Voltage Control Miniature Integrated Stepper Motor Controller

User Manual UIM24302A/B Voltage Control Miniature Integrated Stepper Motor Controller User Manual Miniature Integrated Stepper UIM24302A/B Voltage Control Motor Controller UIM24302A/B [Please pay attention to the following before using the UIROBOT products: UIROBOT products meet the specification

More information

User Manual. UIM24302A/B Voltage Control Miniature Integrated Stepper Motor Controller

User Manual. UIM24302A/B Voltage Control Miniature Integrated Stepper Motor Controller User Manual UIM24302A/B Voltage Miniature Integrated Stepper Motor ler UIM24302A/B Please pay attention to the following before using the Mach Motion products: - Mach Motion products meet the specification

More information

User Manual UIM243XXA/B. Voltage Control Miniature Integrated Stepper Motor Controller V1.2

User Manual UIM243XXA/B. Voltage Control Miniature Integrated Stepper Motor Controller V1.2 User Manual UIM243XXA/B Voltage Control Miniature Integrated Stepper Motor Controller V1.2 UIM243XXA/B Please pay attention to the following before using the UIROBOT products: UIROBOT products meet the

More information

Williamson Manufacturing Company Ltd

Williamson Manufacturing Company Ltd User Manual Williamson Manufacturing Company Ltd The Street, Poynings, West Sussex, BN45 7AQ, United Kingdom. Tel +44(0)1273 857752 Fax +44(0)1273 857511 Web www.wmcpumps.com The Williamson Manufacturing

More information

User Manual. UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver

User Manual. UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver User Manual UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver UIM24002/04/08 Please pay attention to the following before using the Mach Motion products: - Mach Motion products

More information

User Manual. UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver

User Manual. UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver User Manual UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver UIM24002/04/08 Please pay attention to the following before using the UIROBOT products: UIROBOT products meet

More information

User Manual. UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver V1.2

User Manual. UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver V1.2 User Manual UIM240XX Series Parallel Signal Control Miniature Integrated Stepper Motor Driver V1.2 UIM24002/04/08 Please pay attention to the following before using the UIROBOT products: UIROBOT products

More information

User Manual UIM243XXA/B. Voltage Control Miniature Integrated Stepper Motor Controller. Boxer Models A2, A4, A4p

User Manual UIM243XXA/B. Voltage Control Miniature Integrated Stepper Motor Controller. Boxer Models A2, A4, A4p User Manual UIM243XXA/B Voltage Control Miniature Integrated Stepper Motor Controller North American Boxer Pump Contact: Clark Solutions 10 Brent Drive Hudson, MA 01749 Tel: 978-568-3400 Fax: 978-568-0060

More information

User Manual. UIM25001 CAN-RS232 Converting Controller for UIM242xx Controller

User Manual. UIM25001 CAN-RS232 Converting Controller for UIM242xx Controller User Manual CAN-RS232 Converting Controller for UIM242xx Controller Page 2 CAN-RS232 Converting Controller for UIM242xx Controller Features Embedded DSP Microprocessor Embedded 16-bit high-performance

More information

User Manual. UIM241XX Series RS232 Instruction Control Miniature Integrated Stepper Motor Controller

User Manual. UIM241XX Series RS232 Instruction Control Miniature Integrated Stepper Motor Controller User Manual UIM241XX Series RS232 Instruction Control Miniature Integrated Stepper Motor Controller UIM24102/04/08 Please pay attention to the following before using the UIROBOT products: 1. UIROBOT products

More information

FEATURES: DESCRIPTION: APPLICATIONS: SPECIFICATIONS: Electrical Specifications of Drive: Operating Environment: [Geben Sie Text ein]

FEATURES: DESCRIPTION: APPLICATIONS: SPECIFICATIONS: Electrical Specifications of Drive: Operating Environment: [Geben Sie Text ein] ist-09 ist-0 FEATURES: Integrated compact size for saving mounting space & setup time, and reducing electrical interference Anti-Resonance provides optimal torque and nulls mid-range instability Motor

More information

User Manual. UIM241XX Series RS232 Instruction Control Miniature Integrated Stepper Motor Controller (Closed-loop) V1.2

User Manual. UIM241XX Series RS232 Instruction Control Miniature Integrated Stepper Motor Controller (Closed-loop) V1.2 User Manual UIM241XX Series RS232 Instruction Control Miniature Integrated Stepper Motor Controller (Closed-loop) V1.2 UIM24102/04/08-IE Please pay attention to the following before using the UIROBOT products:

More information

Industrial Media Converters

Industrial Media Converters Wireless AP Industrial s Introduction & Features Fiber s Ethernet s Serial s s Distance Extension With Higher Immunity Introduction The media converters have incorporated SUNIX advanced technologies such

More information

MSD980 Microstepping Drive

MSD980 Microstepping Drive MSD980 Microstepping Drive Introduction MSD980 is a high-performance microstepping drive based on most advanced technology in the world today. It is suitable for driving any 2-phase and 4-phase hybrid

More information

MCP230 Dual Channel Motor Controller

MCP230 Dual Channel Motor Controller MCP230A Dual Channel Programmable Brushed DC Motor Controller (c) 2015 Ion Motion Control. All Rights Reserved. Feature Overview: 30 Amps per channel continuous for two brushed DC motors 60 Amps in bridged

More information

P7000 Stepper Drives. P7000 Introduction

P7000 Stepper Drives. P7000 Introduction P7 Introduction P7 Stepper Drives Danaher Motion introduces the P7 Series Stepper Drives. Previously unheard of stepper features allow the P7 to provide true servo-like performance at a fraction of the

More information

P-Series Drive Features and Benefits

P-Series Drive Features and Benefits P-Series Drive Features and Benefits P000 P000 P000 Value DC Input Stepper Drive Wave matching for Kollmorgen motors to provide optimal performance All inputs and outputs are optically isolated Step and

More information

BASICMICRO. MCP26x Dual Channel Motor Controller. MCP26x Dual Channel Programmable Brushed DC Motor Controller

BASICMICRO. MCP26x Dual Channel Motor Controller. MCP26x Dual Channel Programmable Brushed DC Motor Controller BASICMICRO MCP26x Dual Channel Programmable Brushed DC Motor Controller (c) 2016 Basicmicro. All Rights Reserved. Feature Overview: 60 Amps per channel continuous for two brushed DC motors 120 Amps in

More information

Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Version1.0

Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Version1.0 Datasheet MX3660 3-Axis Stepper Drive with Breakout Board & I/O s Version1.0 1. Features Power up to 3 stepper motors of NEMA 17, 23, 24, or 34 Sophisticated stepper motor control based on latest DSP technology

More information

MSD325 Microstepping Drive

MSD325 Microstepping Drive MSD325 Microstepping Drive Introduction MSD325 is a very small size microstepping drive based on most advanced technology in the world today. It is suitable for driving any 2-phase and 4-phase hybrid stepper

More information

Si 2035 Programmable Stepper Drive

Si 2035 Programmable Stepper Drive Si 23 Programmable Stepper Drive Description The Si23 is a programmable stepper drive/ indexer packaged in a rugged steel case. Integral heat sink, mounting brackets, switch covers and connectors are included

More information

3-Axis Stepper Drive Datasheet MX3660

3-Axis Stepper Drive Datasheet MX3660 3-Axis Stepper Drive Datasheet MX3660 3-Axis Stepper Drive + Breakout Board, 20-60VDC, 6A Peak Version 0.0.2 http://www.leadshine.com Features Three individual stepper drive boards Suitable for NEMA17

More information

Preliminary Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Preliminary V1.0

Preliminary Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Preliminary V1.0 Preliminary Datasheet MX4660 4-Axis Stepper Drive with Breakout Board & I/O s Preliminary V1.0 Features Power up to 4 stepper motors of NEMA 17, 23, 24, or 34 Sophisticated stepper motor control based

More information

EM705 2-phase Digital Stepper Drive

EM705 2-phase Digital Stepper Drive EM705 2-phase Digital Stepper Drive 20-70V, 0.35-5A, Sensorless Stall Detection, Pre-Matching Motor Sensorless stall detection eliminates cost of feedback devices and time of cable connection Super-low

More information

TECHNICAL REFERENCE BSD V-3A Bipolar Stepper Driver

TECHNICAL REFERENCE BSD V-3A Bipolar Stepper Driver TECHNICAL REFERENCE BSD 3630 36V-3A Bipolar Stepper Driver Contents Chapter 1 Safety Precautions.. 3 Chapter 2 Drive Overview...4 2.1 Key Features...4 2.2 Drive Description...4 2.3 Applications. 4 Chapter

More information

MD3. Microstepping Motor Driver Page 1 of 7. Description. Software. Mechanical Drawing. Features

MD3. Microstepping Motor Driver Page 1 of 7. Description. Software. Mechanical Drawing. Features Page 1 of 7 The MD3 is a stepper motor driver with an integrated motion controller that is capable of driving size 14 to 42 stepper motors from 2 to 256 microsteps per step. Peak motor currents are selectable

More information

EM806 2-phase Digital Stepper Drive

EM806 2-phase Digital Stepper Drive EM806 2-phase Digital Stepper Drive 24-80V, 0.35-6A, Sensorless Stall Detection, Pre-Matching Motor Sensorless stall detection eliminates cost of feedback devices and time of cable connection Super-low

More information

TMCM-142-IF. Hardware Manual

TMCM-142-IF. Hardware Manual TMCM-142-IF Hardware Manual Version: 1.01 2009-JUL-31 Trinamic Motion Control GmbH & Co KG Sternstraße 67 D - 20 357 Hamburg, Germany http://www.trinamic.com TMCM-142-IF Manual (V1.01/2009-JUL-31) 2 Table

More information

Advanced Features. High Performance Stepper Drive Description. Self Test and Auto Setup

Advanced Features. High Performance Stepper Drive Description. Self Test and Auto Setup www.applied-motion.com STAC6 High Performance Stepper Drive Description The STAC6 represents the latest developments in stepper drive technology, incorporating features that will derive the highest performance

More information

RS-485 I/O Modules: ADAM-4000

RS-485 I/O Modules: ADAM-4000 RS-485 I/O Modules: ADAM-4000 23 ADAM-4000 Series Overview ADAM-4000 Series Remote Data Acquisition and Control Modules Overview 23-2 and Controller Module Selection Guide 23-4 I/O Module Selection Guide

More information

CDN503 HIGH DENSITY I/O ADAPTER USER GUIDE

CDN503 HIGH DENSITY I/O ADAPTER USER GUIDE CDN503 HIGH DENSITY I/O ADAPTER USER GUIDE 13050301 (c) Copyright DIP Inc., 1996 DIP Inc. P.O. Box 9550 MORENO VALLEY, CA 92303 714-924-1730 CONTENTS DN503 PRODUCT OVERVIEW 1 DN503 INSTALLATION 1 POWER

More information

Galil Motion Control. EDD 3701x

Galil Motion Control. EDD 3701x Galil Motion Control EDD 3701x Datasheet : Digital Drive 1-916-626-0101 Galil Motion Control 270 Technology Way, Rocklin, CA [Type here] [Type here] (US ONLY) 1-800-377-6329 [Type here] Product Description

More information

DMX-K-DRV. Integrated Step Motor Driver + (Basic Controller) Manual

DMX-K-DRV. Integrated Step Motor Driver + (Basic Controller) Manual DMX-K-DRV Integrated Step Motor Driver + (Basic Controller) Manual Table of Contents 1. Introduction... 4 Features... 4 2. Part Numbering Scheme... 5 3. Electrical and Thermal Specifications... 6 Power

More information

Users Manual. For P808. High Performance Microstepping Driver

Users Manual. For P808. High Performance Microstepping Driver Users Manual For P808 High Performance Microstepping Driver Thank you for purchasing the Astrosyn P808 drive. Please read this manual thoroughly before installing and operating the driver, and always keep

More information

Motion Controller. MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control

Motion Controller. MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control Allied Motion s MXC motion controller is a very compact, multi-axis servo and/or step motor motion controller,

More information

CDN220 HIGH DENSITY I/O ADAPTER USER GUIDE

CDN220 HIGH DENSITY I/O ADAPTER USER GUIDE CDN220 HIGH DENSITY I/O ADAPTER USER GUIDE 13022001 (c) Copyright DIP Inc., 1996 DIP Inc. P.O. Box 9550 MORENO VALLEY, CA 92303 714-924-1730 CONTENTS CDN220 PRODUCT OVERVIEW 1 CDN220 INSTALLATION 2 POWER

More information

Datasheet-MA860 Stepper Motor Driver

Datasheet-MA860 Stepper Motor Driver Datasheet-MA860 Stepper Motor Driver Introduction The MA860 is an economical micro-stepping driver based on patented technology of EDRIVE. It is suitable for driving 2-phase and 4-phase hybrid stepping

More information

MP6500 Stepper Motor Driver, Digital Current Control

MP6500 Stepper Motor Driver, Digital Current Control This breakout board for the MPS MP6500 micro stepping bipolar stepper motor driver is Pololu s latest stepper motor driver. The module has a pinout and interface that are very similar to that of our popular

More information

SDM / 4 Phase Stepper Drive Module. Compact Size & High Power Density, 20-60VDC, 6A Peak. Version 1.0

SDM / 4 Phase Stepper Drive Module. Compact Size & High Power Density, 20-60VDC, 6A Peak. Version 1.0 SDM660 2 / 4 Phase Stepper Drive Module Compact Size & High Power Density, 20-60VDC, 6A Peak Version 1.0 http://www.leadshine.com / http://www.leadshineusa.com 2013 Leadshine Technology Co., Ltd. 3/F,

More information

HEAVY DUTY INCLINOMETER ANALOG & RS232 INTERFACE

HEAVY DUTY INCLINOMETER ANALOG & RS232 INTERFACE The Heavy Duty inclinometers are robust inclination sensors specially designed for applications involving rough handling and exposure to rigorous conditions. The die cast aluminium housing and the metal

More information

I-7520: RS-232 to RS-485. Input: RS-232 protocol Output:RS-485/RS-422 Speed: Self Tuner 'inside, auto switching baud rate, 300~ BPS

I-7520: RS-232 to RS-485. Input: RS-232 protocol Output:RS-485/RS-422 Speed: Self Tuner 'inside, auto switching baud rate, 300~ BPS I-7520 RS-232 to RS-485 Converter I-7510 RS-485 Repeater RS-232 RS-485 I-7000 SERIES Common Specifications Isolation voltage: 3000VDC Speed: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115000 Dual watchdog

More information

Stepping Systems. 4 components to make a complete system

Stepping Systems. 4 components to make a complete system Stepping Systems High-performance microstepping drives with high-torque stepping motors SureStep stepping systems provide simple and accurate control of position and speed where open-loop control and cost

More information

DMX-K-DRV Integrated Step Motor Driver Manual

DMX-K-DRV Integrated Step Motor Driver Manual Tu Sitio de Automatización! DMX-K-DRV Integrated Step Motor Driver Manual Table of Contents 1. Introduction... 4 2. Part Numbering Scheme... 4 3. Dimensions... 5 NEMA 11 DMX-K-DRV... 5 NEMA 17 DMX-K-DRV...

More information

Hardware Installation Manual MX Axis Stepper Drive with Breakout Board & I/O s

Hardware Installation Manual MX Axis Stepper Drive with Breakout Board & I/O s Hardware Installation Manual MX3660 3-Axis Stepper Drive with Breakout Board & I/O s Version 1.0 11 / 2013 Hardware Manual for MX3660 3-Axis Stepper Drive with Breakout Board & I/O s ii Notice Read this

More information

User s Manual. Extremely Low Noise 3-phase Microstepping Driver. For 3L583M. Version All Rights Reserved

User s Manual. Extremely Low Noise 3-phase Microstepping Driver. For 3L583M. Version All Rights Reserved User s Manual For Extremely Low Noise 3-phase Microstepping Driver Version 1.0 2008 All Rights Reserved Attention: Please read this manual carefully before using the driver! The content in this manual

More information

ST400C-NT USER S GUIDE. Table of Contents

ST400C-NT USER S GUIDE. Table of Contents ST400C-NT USER S GUIDE Table of Contents Board Overview Block Diagram Disclaimer Introduction Features 1 Quick Start 2 Function Description Host Interface and Communication with PC's 3 Networking Operation

More information

User Manual of 3M583

User Manual of 3M583 ECG-SAVEBASE EMAIL:EBAY@SAVEBASE.COM WEB: HTTP://STORES.EBAY.CO.UK/SAVEBASE User Manual of 3M583 High Performance Microstepping Driver ECG-SAVEBASE ECG Safety Statement Easy Commercial Global is not liable

More information

RoboClaw 120A/160A/200A Dual Channel Motor Controller

RoboClaw 120A/160A/200A Dual Channel Motor Controller RoboClaw 2x160A, 34VDC Dual Channel RoboClaw 2x120AHV, 60VDC Dual Channel RoboClaw 2x160AHV, 60VDC Dual Channel RoboClaw 2x200AHV, 60VDC Dual Channel Brushed DC Motor Controllers Version 2.1 (c) 2016 Ion

More information

Galil Motion Control. DMC - 42x0. Datasheet

Galil Motion Control. DMC - 42x0. Datasheet Galil Motion Control DMC - 42x0 Datasheet Product Description The DMC-42x0 is part of Galil s highest performance, stand- alone motion controller Accellera family. Similar to the rest of Galil s latest

More information

STAC5 Stepper Drives. A high performance, compact and cost-effective stepper drive with advanced features and control options

STAC5 Stepper Drives. A high performance, compact and cost-effective stepper drive with advanced features and control options STAC5 Stepper Drives A high performance, compact and cost-effective stepper drive with advanced features and control options Ethernet & EtherNet/IP Advanced Current Control Anti-Resonance Torque Ripple

More information

MCP2xxx Dual Channel Motor Controller

MCP2xxx Dual Channel Motor Controller MCP2xx3, 34VDC Dual Channel MCP2xx6, 60VDC Dual Channel MCP2xx8, 80VDC Dual Channel Programmable Brushed DC Motor Controller (c) 2015 Ion Motion Control. All Rights Reserved. Feature Overview: 120 / 160

More information

Centroid ACORN CNC controller Specification and Use Guide Updated 8/3/17. Overview

Centroid ACORN CNC controller Specification and Use Guide Updated 8/3/17. Overview Centroid ACORN CNC controller Specification and Use Guide Updated 8//7 Overview ACORN is technically a CNC control breakout board for the BeagleBone Green or BeagleBone Black embedded computer the Beagle

More information

RoboClaw 2x30A Dual Channel Motor Controller

RoboClaw 2x30A Dual Channel Motor Controller RoboClaw 2x30A, 34VDC Dual Channel Brushed DC Motor Controller Version 2.2 (c) 2016 Ion Motion Control. All Rights Reserved. Feature Overview: 60 Amps Peak Per Channel Channel Bridging Supported Dual Quadrature

More information

Measurement Systems Datascan Installation and User Guide

Measurement Systems Datascan Installation and User Guide Measurement Systems Datascan Installation and User Guide Supplied By Contents Contents 1. INTRODUCTION... 1 1.1 GENERAL... 1 1.2 DATASCAN MODULE RANGE... 1 1.2.1 Measurement Processors... 1 1.2.2 Analog

More information

A4988 Stepper Motor Driver Carrier with Voltage Regulators

A4988 Stepper Motor Driver Carrier with Voltage Regulators 1 of 6 12/2/2011 6:37 PM A4988 Stepper Motor Driver Carrier with Voltage Regulators Pololu item #: 1183 26 in stock Price break Unit price (US$) 1 19.95 10 17.95 100 13.97 Quantity: backorders allowed

More information

Allegra Series Reference Manual. Programmable Motion Control System

Allegra Series Reference Manual. Programmable Motion Control System Allegra Series Reference Manual Programmable Motion Control System The Allegra series of motion controllers are stand-alone or host controlled, easy-to-use, plug-and-play and cost effective solutions for

More information

200W ISCM4805 / 8005 INTELLIGENT SERVO CONTROL MODULES FEATURES DIGITAL MOTOR CONTROL FOR BRUSHLESS, DC BRUSH, LINEAR AND STEP MOTORS

200W ISCM4805 / 8005 INTELLIGENT SERVO CONTROL MODULES FEATURES DIGITAL MOTOR CONTROL FOR BRUSHLESS, DC BRUSH, LINEAR AND STEP MOTORS ISCM4805 / 8005 INTELLIGENT SERVO CONTROL MODULES DIGITAL MOTOR CONTROL FOR BRUSHLESS, DC BRUSH, LINEAR AND STEP MOTORS 200W The ISCM4805 and ISCM8005 are new Technosoft high-performance intelligent servo

More information

Specification Sheet For electronically commutated motors

Specification Sheet For electronically commutated motors SC-VAV-N Specification Sheet For electronically commutated motors Used in constant pressure applications The SC-EFC is designed to control exhaust air in various building applications. The system includes

More information

HB5M. Hollow Bore Optical Encoder Page 1 of 6. Description. Related Products & Accessories. Features

HB5M. Hollow Bore Optical Encoder Page 1 of 6. Description. Related Products & Accessories. Features Description HB5M Page 1 of 6 The HB5M is a hollow bore (hollow shaft / thru-bore) optical encoder with a machined aluminum enclosure and a clear anodized protective finish. The HB5M optical incremental

More information

Ultra-Accurate Measurement for Temperature and Voltage

Ultra-Accurate Measurement for Temperature and Voltage Ultra-Accurate Measurement for Temperature and Voltage MEASURpoint is an ultra-accurate instrument for measuring any combination of thermocouple, RTD, and voltage inputs. MEASURpoint is available as a

More information

Operating Instructions

Operating Instructions EDB8274UB 00391883 Operating Instructions S2S1 20 28 E1 E2 E3 E4 39 PTC module Type 8274IB These Operating Instructions are valid for modules with the following nameplate data: 8274IB.0x combined with

More information

MiniAmp. Electronics & Software. Miniature Charge Amplifier. Type 5030A...

MiniAmp. Electronics & Software. Miniature Charge Amplifier. Type 5030A... Electronics & Software MiniAmp Type 5030A... Miniature Charge Amplifier The MiniAmp Type 5030A is a single channel, industrial charge amplifier, which converts the charge signal from piezoelectric sensors

More information

The SilverNugget is a servo controller/driver for NEMA 34 frame microstep motors.

The SilverNugget is a servo controller/driver for NEMA 34 frame microstep motors. Date: 25 July 2008 www.quicksilvercontrols.com SilverNugget N3 M-Grade The SilverNugget is a servo controller/driver for NEMA 34 frame microstep motors. Property of Page 1 of 13 This document is subject

More information

The SilverNugget is a servo controller/driver for NEMA 17 & 23 frame microstep motors.

The SilverNugget is a servo controller/driver for NEMA 17 & 23 frame microstep motors. Date: 5 November 2008 www.quicksilvercontrols.com SilverNugget N2 M-Grade The SilverNugget is a servo controller/driver for NEMA 17 & 23 frame microstep motors. Property of Page 1 of 13 This document is

More information

The information in this chapter will enable you to:

The information in this chapter will enable you to: C H A P T E R ➅ Hardware Reference The information in this chapter will enable you to: Environmental Specifications Use this chapter as a quick reference tool for most system specifications Use this chapter

More information

Thermo Electric Cooling Temperature Controller TEC Controller / Peltier Driver ±4 A / up to ±21 V. Miniature OEM TEC Controller

Thermo Electric Cooling Temperature Controller TEC Controller / Peltier Driver ±4 A / up to ±21 V. Miniature OEM TEC Controller Thermo Electric Cooling Temperature Controller TEC Controller / Peltier Driver ±4 A / up to ±21 V TEC-1091 Miniature OEM TEC Controller Features The TEC-1091 is a specialized TEC controller / power supply

More information

Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Version

Datasheet MX Axis Stepper Drive with Breakout Board & I/O s. Version Datasheet MX3660 3-Axis Stepper Drive with Breakout Board & I/O s Version 1.1 http://www.leadshine.com http://www.leadshineusa.com 2013 Leadshine Technology Co., Ltd. Notice This manual is not for use

More information

Integrated Stepper Drive & Motor

Integrated Stepper Drive & Motor SMD23 Integrated Stepper Drive & Motor Manual #: 940-0S050 User Manual AMCI Motion Control Products Important User Information The products and application data described in this manual are useful in a

More information

Hybrid AC Driver [GCNC-1110]

Hybrid AC Driver [GCNC-1110] Page 1 Installation Manual and Datasheet Page 2 Key Features Smooth and quiet operation at all speeds and extremely low motor heating Industrial grade performance for an alternating current servo motor

More information

Intelligent Stepper Drives.

Intelligent Stepper Drives. ST Intelligent Stepper Drives The ST series integrate motion control capability that support stand-alone programming and various bus control as RS-232/485, Ethernet UDP/TCP, CANopen and EtherNet/IP Anti-Resonance

More information

P/N: P E201. imotioncube BX-CAN DATASHEET. Page: 1 of 5. Motor sensor configurations. Sensor. All dimensions are in mm.

P/N: P E201. imotioncube BX-CAN DATASHEET. Page: 1 of 5. Motor sensor configurations. Sensor. All dimensions are in mm. imotioncube BX-C DATASHEET Sensor Incr. Encoder Motor sensor configurations Motor PMSM BLDC DC ST BRUSH (2-ph) ST (3-ph) Incr. Encoder + Hall Analog Sin/Cos encoder SSI BiSS-C* Linear Halls Tacho Open-loop

More information

User Manual. UIM62HXX Series CAN2.0 Bus Instruction Controlled High speed Step Servo Module with PVT

User Manual. UIM62HXX Series CAN2.0 Bus Instruction Controlled High speed Step Servo Module with PVT User Manual UIM62HXX Series CAN2.0 Bus Instruction Controlled High speed Step Servo Module with PVT UIM62H04/08 Please pay attention to the following before using the UIROBOT products: UIROBOT products

More information

ETM MD100 Drive System 1/2HP (370W) User Manual. Table of Contents. Drive Features

ETM MD100 Drive System 1/2HP (370W) User Manual. Table of Contents. Drive Features Table of Contents Drive Features... 1 Drive Specifications... 2 Certifications... 3 Installation - Drive Dimensions... 3 Motor Dimensions (mm)... 4 Drive Mounting... 4 Wiring... 5 I/O Terminals... 9 Menu...

More information

8 Channel Analog Input Module Datasheet. Address / Baud rate / range configurable by the user

8 Channel Analog Input Module Datasheet. Address / Baud rate / range configurable by the user 8 Channel Analog Input Module Datasheet User s Manual Overview: DAM module is a new generation data acquisition and control system based on modular embedded systems. Adopting standard DIN35 rail mounting

More information

Moxa TCC-100 Series User s Guide

Moxa TCC-100 Series User s Guide Moxa TCC-100 Series User s Guide Eighth Edition, February 2009 www.moxa.com/product 2009 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. Moxa TCC-100 Series User s Guide The

More information

Operative Modes Manual

Operative Modes Manual 6) Speeder One VIALE STAZIONE 5-36054 MONTEBELLO VIC. - VI - ITALY Phone (+39) 0444 440441 - Fax (+39) 04444 440418 www.axorindustries.com - INFO@AXORINDUSTRIES.COM Operative Modes Manual Enclosures to

More information

Part Number Total I/O Power Voltage Input Voltage Output Type Maximum Digital I/O Maximum Analog I/O V AC Relay 24V DC.

Part Number Total I/O Power Voltage Input Voltage Output Type Maximum Digital I/O Maximum Analog I/O V AC Relay 24V DC. MicroSmart FC6A PLC CPU Module Specifications KEY FEATURES Embedded Ethernet port Embedded SD memory port Modbus TCP and RTU Embedded RS232C/RS485 user selectable Maximum 520 digital I/O Maximum 126 analog

More information

Standard Options. Model 4100 Position Indicating Meter. Three Phase Motor Control. Positran Transmitter

Standard Options. Model 4100 Position Indicating Meter. Three Phase Motor Control. Positran Transmitter Standard Options Model 4100 Position Indicating Meter A percent-of-full-travel meter is supplied with a trim potentiometer resistor, terminal block and connectors. A potentiometer is required in the actuator

More information

LCMM024: DRV8825 Stepper Motor Driver Carrier,

LCMM024: DRV8825 Stepper Motor Driver Carrier, LCMM024: DRV8825 Stepper Motor Driver Carrier, High Current The DRV8825 stepper motor driver carrier is a breakout board for TI s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout

More information

UNIVERSAL MOTION INTERFACE (UMI) ACCESSORY

UNIVERSAL MOTION INTERFACE (UMI) ACCESSORY USER GUIDE UNIVERSAL MOTION INTERFACE (UMI) ACCESSORY Contents This user guide describes how to use the UMI-77, UMI-A, UMI-Flex, and UMI-Flex accessories. Introduction... What You Need to Get Started...

More information

User Manual For DM332T. 2-Phase Digital Stepper Drive. Designed by StepperOnline. Manufactured by Leadshine

User Manual For DM332T. 2-Phase Digital Stepper Drive. Designed by StepperOnline. Manufactured by Leadshine User Manual For DM332T 2-Phase Digital Stepper Drive Designed by StepperOnline Manufactured by Leadshine #7 Zhongke Road, Jiangning, Nanjing, China T: 0086-2587156578 Web site: www.omc-stepperonline.com

More information

Ultra-Accurate Measurement for Temperature and Voltage

Ultra-Accurate Measurement for Temperature and Voltage Ultra-Accurate Measurement for Temperature and Voltage MEASURpoint is an ultra-accurate instrument for measuring any combination of thermocouple, RTD, and voltage inputs. MEASURpoint is available as a

More information

ACORN User Guide For Revision (Aka Acorn_rev3) Updated 1/23/17

ACORN User Guide For Revision (Aka Acorn_rev3) Updated 1/23/17 ACORN User Guide For Revision 171025 (Aka Acorn_rev3) Updated 1/23/17 Overview ACORN is technically a breakout board for the BeagleBone Green or BeagleBone Black embedded computer. The remainder of this

More information

ZETA6104. Linear Microstepping Motor/Drive Systems. Packaged Drive/Indexer System with L20 Perspective. C Step Motor Systems C81. Catalog /USA

ZETA6104. Linear Microstepping Motor/Drive Systems. Packaged Drive/Indexer System with L20 Perspective. C Step Motor Systems C81. Catalog /USA ZETA6104 Packaged Drive/Indexer System with L20 Perspective Compumotor s ZETA6104 is a stand-alone, single-axis drive/ indexer system. The ZETA6104 packs all the power and reliability of the 6000 family

More information

TECHNICAL DATASHEET #TDAX023300

TECHNICAL DATASHEET #TDAX023300 Preliminary TECHNICAL DATASHEET #TDAX023300 2 Universal Inputs, Dual Universal Valve Controller 2 Universal Inputs 2-3A Outputs CAN (SAE J1939) Configurable with Electronic Assistant P/N: AX023300 Features

More information

0.3 Mega Pixels Serial JPEG Camera with NTSC Video

0.3 Mega Pixels Serial JPEG Camera with NTSC Video SC03MPD: 0.3 Mega Pixels Serial JPEG Camera User Manual 0.3 Mega Pixels Serial JPEG Camera with NTSC Video SC03MPD User Manual, Rev. D For latest user manual, please visit: www.jpegcamera.com Introduction

More information

ATV1200A kv kva

ATV1200A kv kva Characteristics medium voltage variable speed drive ATV1200-10 kv - 5000 kva Main Range of product Altivar 1200 Product or component type Device short name Product destination Product specific application

More information

ATV1200A kv kva

ATV1200A kv kva Characteristics medium voltage variable speed drive ATV1200-3.3 kv - 3500 kva Main Range of product Altivar 1200 Product or component type Device short name Product destination Product specific application

More information

ATV1200A kv kva. Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface Plinth (2) Power cells (9)

ATV1200A kv kva. Phase-shifting transformer Medium voltage arrestors Cooling fans Human machine interface Plinth (2) Power cells (9) Characteristics medium voltage variable speed drive ATV1200-3.3 kv - 370 kva Main Range of product Altivar 1200 Product or component type Device short name Product destination Product specific application

More information

Moxa TCC-100 Series Hardware Installation Guide

Moxa TCC-100 Series Hardware Installation Guide Moxa TCC-100 Series Hardware Installation Guide Twelfth Edition, January 2015 www.moxa.com/product 2015 Moxa Inc. All rights reserved. P/N: 1802001000319 Moxa TCC-100 Series Hardware Installation Guide

More information

TECHNICAL DATASHEET #TDAX023240

TECHNICAL DATASHEET #TDAX023240 Preliminary TECHNICAL DATASHEET #TDAX023240 2 Quadrature Decoder Inputs, Dual Valve Controller 2 Quadrature Decoder Inputs 2-3A Outputs CAN (SAE J1939) Configurable with Electronic Assistant P/N: AX023240

More information

Measuring transducers MI4x0 series Programmable transducers for RTD sensors MI450

Measuring transducers MI4x0 series Programmable transducers for RTD sensors MI450 Measuring transducers MI4x0 series Programmable transducers for RTD sensors MI450 o Measuring of resistance of RTD sensors (Pt100, Pt1000, Ni100, Cu10,...) o Accuracy class up to: 0.5 o Programmable input

More information

Serial Data DIN Fiber Link System

Serial Data DIN Fiber Link System USER GUIDE RLH Industries, Inc. The leader in rugged fiber optic technology. U-120 2017A-0420 DIN Fiber Link System COMPACT, RUGGED & TEMPERATURE HARDENED Introduction The DIN Fiber Link system transports

More information

FTM84/85 Feature Application. Temperature & Humidity / Flow Measuring Specialist

FTM84/85   Feature Application. Temperature & Humidity / Flow Measuring Specialist FTM84/85 Feature Application IP65 protection degree, rugged aluminum case, fit in variety harsh environment Capable of temperature compensation Llinear adjustment air velocity by computer, analogue output

More information

LAUREL. Laureate Digital Panel Meter for Process and Ratiometric Signals ELECTRONICS, INC. Features. Description

LAUREL. Laureate Digital Panel Meter for Process and Ratiometric Signals ELECTRONICS, INC. Features. Description LAUREL ELECTRONICS, INC. Laureate Digital Panel Meter for Process and Ratiometric Signals Features Reads process signals from ±200 mv to ±600V or ±2 ma to ±5A full scale Ratiometric mode for bridges and

More information

HD25A. Absolute Industrial Rugged Metal Optical Encoder Absolute Industrial Rugged Metal Optical Encoder, Page 1 of 5. Description.

HD25A. Absolute Industrial Rugged Metal Optical Encoder Absolute Industrial Rugged Metal Optical Encoder, Page 1 of 5. Description. Description HD25A, Page 1 of 5 The HD25A is a NEMA 25 sized absolute encoder designed for industrial applications. The HD25A optical encoder is a 12-bit absolute rotary position sensor, which reports a

More information

RS03/06-P Quick Setup Guide

RS03/06-P Quick Setup Guide RS03/06P Quick Setup Guide Requirements To begin, make sure you have the following equipment: A 2470VDC power supply A compatible stepservo motor A small flat blade screwdriver for tightening the connectors

More information

SYSTEMS ELECTRONICS GROUP

SYSTEMS ELECTRONICS GROUP SYSTEMS ELECTRONICS GROUP SYSTEMS M4500 INDUSTRIAL CONTROLLER S4520-RDC: MOTION CONTROL CO-CPU With RESOLVER FEEDBACK Intelligent I/O board with motion control I/O and built-in M4500 processor (same as

More information

R1M-GH THERMOCOUPLE & DC INPUT MODULE MODEL. Remote I/O R1M Series. (16 points)

R1M-GH THERMOCOUPLE & DC INPUT MODULE MODEL. Remote I/O R1M Series. (16 points) Remote I/O R1M Series THERMOCOUPLE & DC INPUT MODULE (16 points) MODEL MODEL & SUFFIX CODE SELECTION R1MGH2T MODEL Modbus protocol I/O TYPE GH2 : Thermocouple or DC input, 16 points FIELD TERMINAL TYPE

More information

Stepper motor driver HEM-545 last change:

Stepper motor driver HEM-545 last change: Documentation for Stepper motor driver HEM-545 last change: 16.03.2011 Functional description HEM-545 is a one channel motor driver for 2-phase stepping motors with pulse and direction interface. Motor

More information