1492 CABLE 010 A Bulletin 1492 Programmable Controller Wiring Systems Catalog Number Explanation

Size: px
Start display at page:

Download "1492 CABLE 010 A Bulletin 1492 Programmable Controller Wiring Systems Catalog Number Explanation"

Transcription

1 Bulletin Catalog Number Explanation Catalog Number Explanation Digital Cables for Bulletin,, Important: Use the following tables as a product configurator for pre-wired, IFM-ready, and module-ready cables for Bulletins,, and digital module cables. All combinations of these fields make valid product cat. nos. Refer to selection tables for IFM/XIM compatibility, additional cables, and ordering. a Digital Interface Cable b Standard or Build to Order Lengths Code. m (. ft). m (. ft). m (. ft) Standard. m (. ft).. m (.. ft). m (. ft increments).. m (.. ft). m (. ft) increments.. m (.. ft). m (. ft) increments Build-to- Order CABLE A a b c c Cable Type - Bulletins,, and digital module cables. Code For use with Bulletin Modules A, B, C, D, E, G, N, S Pre-wired cables for -point isolated and -point Bulletin modules CR Pre-wired cable for Cat. No. -OA (XIM only) H Pre-wired cable for -point digital Bulletin modules N Digital module-ready cable with -point Cat. No. -N cable connector RTBB Digital module-ready cable with -point Cat. No. -RTB terminal block (blue) RTBO Digital module-ready cable with -point Cat. No. -RTC terminal block (orange) RTBR Digital module-ready cable with -point Cat. No. -RTR terminal block (red) TBCH Digital module-ready cable with -pin Cat. No. -TBCH removable terminal block For use with Bulletin Modules U, V, W, X Pre-wired cable for - and -point digital Bulletin modules Y, Z Pre-wired cable for -point isolated and -point digital Bulletin modules P Digital IFM-ready cable with conductors Q Digital IFM-ready cable with conductors N Digital module-ready cable with -point Cat. No. -N cable connector For use with Bulletin Modules F, T Pre-wired cable for digital Bulletin modules FF Pre-wired cable with fused wiring arm for -point digital Bulletin output modules J, K, L, M, R Pre-wired cables for -point isolated and -point digital Bulletin modules WA Digital module-ready cable with Cat. No. -WA -point wiring arm WD Digital module-ready cable with Cat. No. -WD -point wiring arm WH Digital module-ready cable with Cat. No. -WH -point wiring arm WHF Digital module-ready cable with Cat. No. -WHF -point fused wiring arm WN Digital module-ready cable with Cat. No. -WN -point wiring arm To make sure the Bulletin SLC digital module is compatible with IFM/XIM, refer to To make sure the Bulletin PLC digital module is compatible with IFM/XIM, refer towww.ab.com/catalogs. To make sure the Bulletin ControlLogix digital module is compatible with IFM/XIM, refer to page -. Preferred availability cat. nos. are bold. Publication A-CAA-EN-P -

2 Bulletin Bulletin ControlLogix Modules Analog AIFMs and Cables for Bulletin ControlLogix Standard and Combination Modules -ch input, output or -in/-out -IF (Sgl-End ) -IF (Sgl-End Current) -IF (Diff ) -IF (Diff Current) Bulletin Analog Module -AIFM- -RAIFM- -RTB VA VB... -ch isolated -AIFMS- -RAIFMS- -RTB ZA ZB ZC -ch -ch single-ended -ch blown -ch blown -ch input blown fuse Blown fuse See footnotes on the following page. -AIFM- -RAIFM- -RTB TA TB TC TD UA UB UC UD WA WB -AIFM-F- TA TB TC TD UC UD ZA ZB ZC -AIFM-F- UA UB UC UD -AIFM-F- UA UB UC UD Safety Integrity Level -TAIFM-F- UA -IF (Sgl-End ) -IF (Sgl-End Current) -IF (Diff ) -IF (Diff Current) -OF () -OF (Current) -OF () -OF (Current) -IFFXOFF (Cur In & Out) -IFFXOFF (Volt In & Out) -IFFXOFF (Current In & Out) - Preferred availability cat. nos. are bold. Publication A-CAA-EN-P

3 Bulletin Bulletin ControlLogix Modules Analog AIFMs and Cables for Bulletin ControlLogix Isolated, RTD, Thermocouple and Specialty Modules -IFI (Current) Bulletin Analog Module.. -ch isolated -AIFMS- -RAIFMS- -RTB X Y Z Y Y Z -ch -ch single-ended -AIFM- -RAIFM- -RTB UC UD WA WB Thermocouple -ch -AIFMTC- Y YT -ch, counter input outputs -ch, fused counter input, fused outputs -ch w/ blown -ch w/ blown input/ output ch -IFI () High-Speed Counter/Encoder -IFCIS -AIFMCE XA XB Fusible High-Speed Counter/Encoder -AIFMCE-F XA XB -AIFM-F- UC UD -AIFM-F- UB -AIFMPI M To order a Pre-wired Cable, add the Suffix No. from the table above to the end of the Cat. No. below..m Cable = -ACABLE_.M Cable = -ACABLE_.M Cable = -ACABLE_.M Cable = -ACABLE_ Custom Length Cable = -CABLEXXX_. See Catalog Number Explanation on page - for available Custom Length Codes to replace XXX in Cat. No. Order plugs separately (two plugs catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog number with the code for the desired terminal style. The code for screw style is N and the code for push in style is P. Some analog modules can be oated in up to four modes (current/voltage, single-ended/differential) based on connections. In all cases, each channel is factory-configured for the same mode. However, you can field configure any channel for another mode. You may need to alter the terminal block wiring to match the application. Refer to the PLC Module Installation Manual. Requires two Cat. No. -AIFM-F-, one cable, Cat. No. -ACUF, is required. This module is for use in SIL safety systems only. It does not satisfy the requirements for general fault tolerance. To use this module in a SIL application, specially developed application software for the ControlLogix processor must be used. To obtain the latest revision of this application software contact Technical Support at OFCI -OFVI -IRI -ITI -ITI -IFH ( with HART) -IFH (Current with HART) -IFH (Single-ended with HART) -IFH (Differential with HART) -OFH ( with HART) -OFH (Current with HART) -HSC (...V DC) -HSC (V DC) -PIM Publication A-CAA-EN-P -

4 Bulletin Bulletin CompactLogix Modules Relay XIMs and Cables for Bulletin CompactLogix -Point and -Point Modules -IAI -IA Bulletin CompactLogix Module Cat. No. Cat. No. Cat. No. Digital Cable Cat. No. Suffix Relay Master ( Indicating) DC Relays -XIM-R E AC Relays -XIM-R H DC Relays -XIM-R E DC Relays w/fusing -XIM-RF E AC Relays -XIM-R H AC Relays w/ fusing -XIM-RF H High Density Relay Master, Indicating Relays - Mechanical -XIMTR-R -RXIMTR-R -RTB E Relays - Solid-State -XIMTS-R -RXIMTS-R E Relay Expander ( Indicating) Expander w/ DC relays -XIM-R -RXIM-R -RTB Expander w/ DC relays -XIM-R Fusible Expander -ch w/ blown -XIMF-F- -ch w/ blown -XIMF-F- Feed-Through Expander -ch Expander -XIMF- To order a Pre-wired Cable, add the Suffix No. from the table above to the end of the Cat. No. below..m Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_ Custom Length Cable = -CABXXX_. See Catalog Number Explanation on page - for available Custom Length Codes to replace XXX in Cat. No. Order plugs separately (two plugs catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog number with the code for the desired terminal style. The code for screw style is N and the code for push in style is P. In the input module's sink mode only. One expander module is connected to a master to provide a total of outputs. An extender cable is included with each expander to connect it to the master. This IFM is not recommended for use the PLC modules that have an off-state leadkage current exceeding. ma. Use a -IFMDN or - IFMDA- for inputs. Use -IFMD- for outputs. The indicates the PLC output status. The voltage rating is relay control/coil voltage. For relay contact ratings, refer to page -. -IQ -IQF -IM -OA -OA -OB -OB -OV -OW -OWI -OW Publication A-CAA-EN-P -

5 Bulletin Bulletin CompactLogix Modules Analog AIFMs and Cables for Bulletin CompactLogix Standard and Combination Modules Analog AIFMs and Cables for Bulletin CompactLogix Specialty Modules -ch, in or out -ch -ch single ended -ch blown, rest points -ch blown -ch -ch single ended Temrinal Block -IF (Sgl-End ) -HSC -IF (Sgl-End Current) -IFI (Current) -IF (Diff ) -IFI () Bulletin CompactLogix Module -AIFM- -RAIFM- -RTB BA BB BC BD AA AC AD -AIFM- -RAIFM- -RTB EA EB EC ED D D -IF (Diff- Current) -AIFMI-F- BA BB BC BD -IFC (Current) -IF (Sgl-End ) -IF (Sgl-End Current) -IF (Diff - ) -IF (Diff - Current) -AIFM-F- EA EB EC ED -OF () Bulletin CompactLogix Module -AIFM- -RAIFM- -RTB EE EE -ch isolated -AIFMS- -RAIFMS- -RTB CA CB CC Thermocouple -IFV () -IT -IR -OFCI (Current) -OFVI () -OFC (Current) -IFXOF or- IFFXOFF (Current in & out) -OFV () -OF (Current) -IFXOF or - IFFXOFF ( in & out) -OF () -IFXOF or - IFFXOFF (Current in & out) Thermocouple -AIFMTC- E E -ch isolated -AIFMS- -RAIFMS- -RTB C -channel input counter -ch fused couter input/ fused output -ch blown, rest points -ch blown -ch input blown fuse RTD High-Speed Counter/Encoder -AIFMCE HA Fused High-Speed Counter/Encoder -AIFMCE-F HA -AIFMI-F- BE BF AE AE -AIFM-F- CA CB CC -AIFM-F- EE EE To order a Pre-wired Cable, add the Suffix No. from the table above to the end of the Cat. No. below..m Cable = -ACAB_.M Cable = -ACAB_.M Cable = -ACAB_.M Cable = -ACAB_ Custom Length Cable = -ACABXXX_. See Catalog Number Explanation on page - for available Custom Length Codes to replace XXX in Cat. No. Order plugs separately (two plugs catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog number with the code for the desired terminal style. The code for screw style is N and the code for push in style is P. - Publication A-CAA-EN-P

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field- s Analog Wiring Systems Digital Wiring Systems with Terminal Blocks Bulletin Increases machine building productivity Simplifies

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable s Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building productivity

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable s Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building productivity

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable s Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building productivity

More information

1492 XIM RF. No. Cable Connector Pins pins pins. Expander module. Module Type (all types do not configure a catalog number)

1492 XIM RF. No. Cable Connector Pins pins pins. Expander module. Module Type (all types do not configure a catalog number) Digital Interface Modules (XIMs) Relay Bulletin XIM RF a b c d Overview XIM RXIM XIMTR RXIMTR XIMTS RXIMTS a Modules Relay Interface Module with Relay Interface Module with Mechanical High Density Relay

More information

Bulletin 1492 Programmable Controller Wiring Systems Overview. Digital Relay Expander (16 Outputs) with Fusing

Bulletin 1492 Programmable Controller Wiring Systems Overview. Digital Relay Expander (16 Outputs) with Fusing Bulletin Overview Digital Relay Expander ( Outputs) Digital Relay Expander ( Outputs) with Fusing Relay Expander Cat. No. -XIM-R,-XIM-RF,-XIM-R Relay Masters with Fusing For -point: Cat. No. -XIM-RF, -XIM-RF

More information

1492 ACABLE 010 A. Standard m (16.40 ft) ( ft) 0.1 m (0.328 ft increments) m ( ft) 0.5 m (1.

1492 ACABLE 010 A. Standard m (16.40 ft) ( ft) 0.1 m (0.328 ft increments) m ( ft) 0.5 m (1. Bulletin Catalog Number Explanation Analog Cables Pre-Wired Bulletin pre-wired cables are designed to minimize control wiring in a panel. Pre-wired cables, when used with an analog IFM, replace the point-to-point

More information

1492 XIM RF. No. Cable Connector Pins pins pins. Expander module. Module Type (all types do not configure a catalog number)

1492 XIM RF. No. Cable Connector Pins pins pins. Expander module. Module Type (all types do not configure a catalog number) Digital Interface Modules (XIMs) Relay Bulletin XIM RF a b c d Overview XIM RXIM XIMTR RXIMTR XIMTS RXIMTS a Modules Relay Interface Module with Fixed Relay Interface Module with Removable Mechanical High

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable s Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building productivity

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable s Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building productivity

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable Terminal Blocks Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Increases machine building productivity

More information

Allen-Bradley 1492-RIFM20F

Allen-Bradley 1492-RIFM20F Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field- s Analog Wiring Systems Digital Wiring Systems with Terminal Blocks Bulletin Increases machine building productivity Simplifies

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable Terminal Blocks Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building

More information

Bulletin 1746 Digital 32-Point I/O Modules (Continued)➋

Bulletin 1746 Digital 32-Point I/O Modules (Continued)➋ 32 Digital/Analog Programmable Controller and PowerFlex Drive Wiring Systems Bulletin 1746 Digital 32-Point I/O Modules (Continued)➋ 120V AC LEDs and extra terminals for outputs 1492-IFM40D120-2 120V AC

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable s Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building productivity

More information

Allen-Bradley 1492-IFM40F

Allen-Bradley 1492-IFM40F Overview Digital Interface Modules (IFMs) Feed-Through Feed-through IFMs provided the same capability as normal terminal blocks, but in a more condensed package. Feed-through Standard For -point: Cat.

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Analog Wiring Systems Digital Wiring Systems with Field-Removable s Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building productivity Simplifies

More information

1746-IV32 24V DC 32 Current Sourcing DC Input Module 1746-ITV16 24V DC 16 Fast Response DC Sourcing Input Module

1746-IV32 24V DC 32 Current Sourcing DC Input Module 1746-ITV16 24V DC 16 Fast Response DC Sourcing Input Module 10 Select SLC 500 I/O Modules 1746-OBE, 1746-OB6EI, and 1746-OB32E modules provide electronic protection from short circuit and overload conditions. Wiring of and 32-channel modules can also be accomplished

More information

Allen-Bradley Replacements

Allen-Bradley Replacements Digital Programmable Controller Wiring Systems (Catalog Number 49-IFM - - ) Product Data Contents Section Page Description Features and Benefits of Digital IFMs (Interface Modules) and Pre-wired Cables

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable Terminal Blocks Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building

More information

SLC 500 System Overview

SLC 500 System Overview SLC 500 System Overview The Allen-Bradley SLC 500 is a small chassis-based family of programmable controllers, discrete, analog, and specialty I/O, and peripheral devices. The SLC 500 family delivers power

More information

1769 Packaged Controllers

1769 Packaged Controllers Compactlogix 1769 Packaged Controllers CPU 1769-L23-QBFC1B 1769-L23E-QB1B 1769-L23E-QBFC1B Available user memory 512 kb 512 kb 512 kb Communication ports Embedded I/O 2 RS-232 serial ports (isolated DF1

More information

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Analog Wiring Systems Digital Wiring Systems with Field-Removable Terminal Blocks Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building productivity

More information

Digital IFMs are available with either a 20- or 40-pin cable connector. This is determined by the number of connections required for the I/O module.

Digital IFMs are available with either a 20- or 40-pin cable connector. This is determined by the number of connections required for the I/O module. Introdution Digitl Interfe Modules (IFMs) Digitl IFMs re ville with either 20- or 40-pin le onnetor. This is determined y the numer of onnetions required for the I/O module. The numer of terminls vries

More information

Analog RTD and Thermocouple Modules. Analog Output Modules. Select a ControlLogix System

Analog RTD and Thermocouple Modules. Analog Output Modules. Select a ControlLogix System Analog RTD and Thermocouple Modules Cat. No. Inputs/Outputs Range Resolution Removable Terminal Block 1756-IR6I 6 individually isolated RTD inputs 1 487 4 2000 1756-IRT8I 8 individually isolated inputs,

More information

8 System Overview. Notes:

8 System Overview. Notes: 8 System Overview Notes: Step 1 - Select: I/O modules available in a variety of densities and voltage options. Some modules have diagnostic features, individually isolated inputs/outputs or electronic

More information

Select SLC 500 I/O Modules

Select SLC 500 I/O Modules Step 1 - Select: I/O modules available in a variety of densities and voltage options. Some modules have diagnostic features, individually isolated inputs/outputs or electronic protection. interface modules

More information

Select SLC 500 I/O Modules

Select SLC 500 I/O Modules Step 1 - Select: I/O modules available in a variety of densities and voltage options. Some modules have diagnostic features, individually isolated inputs/outputs or electronic protection. interface modules

More information

Bulletin 1492 I/O Wiring Conversion Systems - PLC to ControlLogix 1756 Product Overview

Bulletin 1492 I/O Wiring Conversion Systems - PLC to ControlLogix 1756 Product Overview Bulletin I/O Wiring Conversion Systems - PLC- to ControlLogix Product Overview Bulletin I/O Wiring Conversion System Bulletin to ControlLogix I/O Conversion Modules provide a fast and efficient method

More information

Bulletin 1492 In-Panel I/O Wiring System Modules and Cables for Allen-Bradley Programmable Controllers Reduced Wiring Time, Accurate Connections

Bulletin 1492 In-Panel I/O Wiring System Modules and Cables for Allen-Bradley Programmable Controllers Reduced Wiring Time, Accurate Connections Bulletin 1492 In-Panel I/O Wiring System Modules and Cables for Allen-Bradley Programmable Controllers Reduced Wiring Time, Accurate Connections Simplify Your Wiring and Reduce Errors Let s face it: in

More information

1492 ACABLE 010 A. Standard m (16.40 ft) ( ft) 0.1 m (0.328 ft increments) m ( ft) 0.5 m (1.

1492 ACABLE 010 A. Standard m (16.40 ft) ( ft) 0.1 m (0.328 ft increments) m ( ft) 0.5 m (1. Bulletin Ctlog Numer Explntion Anlog Cles Pre-Wired Bulletin pre-wired les re designed to minimize ontrol wiring in pnel. Pre-wired les, when used with n nlog IFM, reple the point-to-point wiring etween

More information

SLC 500 System Overview

SLC 500 System Overview SLC 500 System Overview The Allen-Bradley SLC 500 is a small chassis-based family of programmable controllers, discrete, analog, and specialty I/O, and peripheral devices. The SLC 500 family delivers power

More information

Select a ControlLogix System

Select a ControlLogix System Step 1 ControlLogix I/O Modules I/O modules Some modules have field-side diagnostics, electronic fusing, or individually isolated inputs/outputs A remote terminal block (RTB) or wiring system for each

More information

The ControlLogix system

The ControlLogix system ControlLogix The ControlLogix system 1756-L61 1756-L62 1756-L63 1756-L64 User memory 2 MB 4 MB 8 MB 16 MB 32 MB I/O memory Optional nonvolatile memory storage 478 KB Digital I/O, max 128,000 Analog I/O,

More information

CompactLogix System. Selection Guide

CompactLogix System. Selection Guide Selection Guide CompactLogix System Catalog Numbers 1769-L16ER-BB1B, 1769-L1ER-BB1B, 1769-L1ERM-BB1B, 1769-L24ERQB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B, 1769-L30ER, 1769-L30ER-NSE, 1769L30ERM, 1769-L33ER,

More information

Product Information on the Manual

Product Information on the Manual Edition 12.2004 S7-300 Programmable Controller; Module Specifications, as of Edition 02/2004 (A5E00105505) ET 200M Distributed I/O Device Signal Modules for Process Automation, as of Edition 10/2004 (A5E00085262)

More information

Device-Level Ring Topology

Device-Level Ring Topology 8 6 7 5 4 3 2 1 Select FLEX I/O Communication Adapters 9 Figure 1 - EtherNet/IP Communication ControlLogix processor with 1756-ENBT module CompactLogix controller EtherNet/IP network 1783 Stratix Switch

More information

Select a Micro800 Controller

Select a Micro800 Controller Select a Micro800 Controller Micro800 controllers are designed for low-cost, standalone machines. These economical small-size PLCs are available in different form factors based on the number of I/O points

More information

Modicon 800 to ControlLogix Bulletin 1756 I/O Field Wiring Conversion System. Selection Guide

Modicon 800 to ControlLogix Bulletin 1756 I/O Field Wiring Conversion System. Selection Guide Modicon 800 to ControlLogix Bulletin 1756 I/O Field Wiring Conversion System Selection Guide Table of Contents Bulletin 1492 Modicon 800 to ControlLogix 1756 I/O Field Wire Conversion System The Bulletin

More information

MicroLogix 1500 Controller

MicroLogix 1500 Controller 12 MicroLogix Programmable Controllers Overview MicroLogix 1500 Controller The MicroLogix 1500 controller is a world-class programmable logic control platform with even more advanced features and performance

More information

Select Micro800 Plug-in Modules and Accessories

Select Micro800 Plug-in Modules and Accessories Select Micro800 Plug-in Modules and Accessories Micro800 plug-in modules extend the functionality of embedded I/O without increasing the footprint of the controller. It improves performance by adding additional

More information

CompactLogix Selection Guide

CompactLogix Selection Guide CompactLogix Selection Guide 1769 Compact I/O Modules 1768 CompactLogix Integrated Motion 1769 CompactLogix Communication Modules 1768 and 1769 CompactLogix Controllers 1768 and 1769 CompactLogix Power

More information

Select Family: MicroLogix 1100 or 1400 Controller

Select Family: MicroLogix 1100 or 1400 Controller Select Family: MicroLogix 1100 or 1400 Controller 21 Select Family: MicroLogix 1100 or 1400 Controller Step 1 - Select: controller family - based on memory, I/O, added functionality, programming instructions

More information

POINT I/O Family. Chapter. Overview

POINT I/O Family. Chapter. Overview Chapter 1 POINT I/O Family Overview The POINT I/O family has modular I/O modules that are ideal for applications where flexibility and low-cost of ownership are key for successful control system design

More information

Micro800 Programmable Controller Family. Bulletin 2080 Selection Guide

Micro800 Programmable Controller Family. Bulletin 2080 Selection Guide Micro800 Programmable Controller Family Bulletin 2080 Selection Guide Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment.

More information

S5-115U. Application

S5-115U. Application S5-115U S5-115U Design Central configuration Distributed configuration Note General technical specifications S5-115U Principle of operation Program memory Processor Programming S5-115U Cyclic program execution

More information

CompactLogix Communication Options

CompactLogix Communication Options Communication Options You can configure your system for information exchange between a range of devices and computing platforms and operating systems. Select a controller with integrated communication

More information

IEC Contactors. Auxiliary Contact Blocks GENERAL

IEC Contactors. Auxiliary Contact Blocks GENERAL IEC Contactors Auxiliary Contact Blocks GENERAL Description 3RH19 Auxiliary contact blocks The 3RH19 auxiliary contact blocks are available in 1, 2, 3 and 4-pole front mount versions and 2-pole side mount

More information

Simatic S5 to RSLogix 5000 Application Conversion Guide. Application Solution

Simatic S5 to RSLogix 5000 Application Conversion Guide. Application Solution Simatic S5 to RSLogix 5000 Application Conversion Guide Application Solution Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment.

More information

Allen-Bradley. User Manual. Remote I/O Adapter Module. (Cat. No ASB Series C and D)

Allen-Bradley. User Manual. Remote I/O Adapter Module. (Cat. No ASB Series C and D) Allen-Bradley Remote I/O Adapter Module (Cat. No. 1794-ASB Series C and D) User Manual Important User Information Because of the variety of uses for the products described in this publication, those responsible

More information

Digital Lighting Systems, Inc.

Digital Lighting Systems, Inc. Digital Lighting Systems, Inc. Four Channel Dry Contacts Relays Switch Pack DMX512 compatible USER'S MANUAL -UM User's Manual - Page 1 GENERAL DESCRIPTION The is a 4-channel DMX-512 compatible electro-mechanical

More information

4. Specifications and Additional Information

4. Specifications and Additional Information 4. Specifications and Additional Information AGX52004-1.0 8B/10B Code This section provides information about the data and control codes for Arria GX devices. Code Notation The 8B/10B data and control

More information

ControlLogix Analog I/O Modules

ControlLogix Analog I/O Modules ControlLogix Analog I/O Modules 1756-IF16,- IF6CIS, -IF6I, -IF8, -IR6I, -IT6I, -IT6I2, -OF4, -OF6CI, -OF6VI, -OF8 User Manual Important User Information Because of the variety of uses for the products

More information

Digital Lighting Systems, Inc.

Digital Lighting Systems, Inc. , Inc. PD402-DMX Four Channel Dimmer and Switch Packs 4 x 2.5 Amps @ 6VDC to 24 VDC DMX52 compatible DMX52 4 x 2.5 Amps Dimmer Pack C UL US LISTED Digital Lighting Systems, Inc. USER'S MANUAL User's Manual

More information

AB Spares. PanelConnect Module for Sensor Connection To Programmable Controller. Technical Data

AB Spares. PanelConnect Module for Sensor Connection To Programmable Controller. Technical Data PanelConnect Module for Sensor Connection To Programmable Controller Technical Data Table of Contents Description Page Description Page System View.................................................... 2

More information

RS 232 PINOUTS. 1. We use RJ12 for all of our RS232 interfaces (Link-2-Modbus & Link-2-PC- Serial/RS232). The diagram below shows our pin out.

RS 232 PINOUTS. 1. We use RJ12 for all of our RS232 interfaces (Link-2-Modbus & Link-2-PC- Serial/RS232). The diagram below shows our pin out. RS 232 PINOUTS 1. We use RJ12 for all of our RS232 interfaces (Link-2-Modbus & Link-2-PC- Serial/RS232). The diagram below shows our pin out. 2. A DB9 Female to RJ12 Female Serial/Terminal Modular Adaptor

More information

Select a Micro800 Controller

Select a Micro800 Controller Select a Micro800 Controller Micro800 controllers are designed for low-cost, standalone machines. These economical small-size PLCs are available in different form factors based on the number of I/O points

More information

DBK24. Isolated Digital Output Chassis. Overview

DBK24. Isolated Digital Output Chassis. Overview DBK24 Isolated Digital Output Chassis Overview 1 Power Requirements 2 Hardware Setup 2 Card Connection 2 Card Configuration 3 DaqBook and DaqBoard Connection 4 DaqBoard/2000 Series Board Connection 5 DaqBook

More information

CIS-331 Spring 2016 Exam 1 Name: Total of 109 Points Version 1

CIS-331 Spring 2016 Exam 1 Name: Total of 109 Points Version 1 Version 1 Instructions Write your name on the exam paper. Write your name and version number on the top of the yellow paper. Answer Question 1 on the exam paper. Answer Questions 2-4 on the yellow paper.

More information

CIS-331 Fall 2014 Exam 1 Name: Total of 109 Points Version 1

CIS-331 Fall 2014 Exam 1 Name: Total of 109 Points Version 1 Version 1 1. (24 Points) Show the routing tables for routers A, B, C, and D. Make sure you account for traffic to the Internet. Router A Router B Router C Router D Network Next Hop Next Hop Next Hop Next

More information

ControlLogix Digital I/O Modules

ControlLogix Digital I/O Modules User Manual ControlLogix Digital I/O Modules Catalog Numbers 1756-IA8D, 1756-IA16, 1756-IA16I, 1756-IA32, 1756-IB16, 1756-IB16D, 1756-IB16I, 1756-IB16IF, 1756-IB32, 1756-IC16, 1756-IG16, 1756-IH16I, 1756-IM16I,

More information

POINT I/O Digital and Analog Modules and POINTBlock I/O Modules

POINT I/O Digital and Analog Modules and POINTBlock I/O Modules POINT I/O Digital and Analog Modules and POINTBlock I/O Modules Cat. No. 1734-XX and 1734D-XX User Manual Important User Information Because of the variety of uses for the products described in this publication,

More information

C E R T I F I C A T E O F C O M P L I A N C E

C E R T I F I C A T E O F C O M P L I A N C E Issued to: SIEMENS AG LOW VOLTAGE SIEMENSSTRASSE 10 93055 REGENSBURG, GERMANY This is to certify that representative samples of Motor Controllers, Manual See following pages for list of models Have been

More information

CIS-331 Fall 2013 Exam 1 Name: Total of 120 Points Version 1

CIS-331 Fall 2013 Exam 1 Name: Total of 120 Points Version 1 Version 1 1. (24 Points) Show the routing tables for routers A, B, C, and D. Make sure you account for traffic to the Internet. NOTE: Router E should only be used for Internet traffic. Router A Router

More information

ControlLogix Digital I/O Modules

ControlLogix Digital I/O Modules User Manual Original Instructions ControlLogix Digital I/O Modules Catalog Numbers 1756-IA8D, 1756-IA16, 1756-IA16I, 1756-IA32, 1756-IB16, 1756-IB16D, 1756-IB16I, 1756-IB16IF, 1756-IB32, 1756-IC16, 1756-IG16,

More information

SIMATIC S plus TIA Portal

SIMATIC S plus TIA Portal Product range overview SIMATIC S7-1500 plus TIA Portal Power + Efficiency The ultimate plus in automation Intuitive, efficient, proven TIA Portal redefines engineering Answers for industry. Your plus of

More information

Australian Declaration of Conformity

Australian Declaration of Conformity The undersigned, representing the following Manufacturer: Rockwell Automation Inc. 1201 South 2nd Street Milwaukee, WI 53204 U.S.A. Australian Declaration of Conformity and the Authorised Supplier within

More information

Environmental Specifications CompactLogix Controllers and Compact GuardLogix 5370 Controllers

Environmental Specifications CompactLogix Controllers and Compact GuardLogix 5370 Controllers Environmental Specifications - 1769 CompactLogix Controllers and Compact GuardLogix 5370 Controllers Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry

More information

S5-115U. Application

S5-115U. Application S5-115U Application S5-115U Design Central configuration Distributed configuration Note General technical specifications S5-115U Principle of operation Program memory Processor Programming S5-115U Cyclic

More information

RSTI-EP Slice I/O. Analog Input Modules `EP-3164, EP-3264, EP-3124, EP-3368, EP-3468 EP-3664, EP-3704, EP GFK-2960F September 2018

RSTI-EP Slice I/O. Analog Input Modules `EP-3164, EP-3264, EP-3124, EP-3368, EP-3468 EP-3664, EP-3704, EP GFK-2960F September 2018 September 2018 Module Status LED Channel Status LEDs Digital Input Connector Ground 24 V DC FE Analog Input Module RSTI-EP Slice I/O Analog Input Modules `EP-3164, EP-3264, EP-3124, EP-3368, EP-3468 EP-3664,

More information

Input Conversion Type. Response, per Channel. 70 ms at Notch = 60 Hz (default) 80 ms at Notch = 50 Hz 16 ms at Notch = 250 Hz 8 ms at Notch = 500 Hz

Input Conversion Type. Response, per Channel. 70 ms at Notch = 60 Hz (default) 80 ms at Notch = 50 Hz 16 ms at Notch = 250 Hz 8 ms at Notch = 500 Hz 1734 POINT I/O POINT I/O POINT I/O is a family of modular I/O modules that are ideal for applications where flexibility and low cost of ownership are key for successful control system design and operation.

More information

ControlLogix PLC Revision Release List Rockwell Automation Certificate No.: 968/EZ /16

ControlLogix PLC Revision Release List Rockwell Automation Certificate No.: 968/EZ /16 Release List ertificate No.: 968/EZ 536.02/16 SIL 2 Listed omponents IE 61508:2010 1756-RM001N-EN-P ontrollogix SIL 2 Safety Reference Manual NA NA 968/M 338.17/16 1756-A4 4 Slot ontrollogix hassis NA

More information

Micro800 Family of PLCs. Featuring Allen-Bradley Connected Components Workbench Programming and Configuration Software

Micro800 Family of PLCs. Featuring Allen-Bradley Connected Components Workbench Programming and Configuration Software Micro800 Family of PLCs Featuring Allen-Bradley Connected Components Workbench Programming and Configuration Software Micro800 PLCs and Connected Components Workbench Software As a machine builder, are

More information

Backplane. Allen-Bradley. System integration. Backplane

Backplane. Allen-Bradley. System integration. Backplane Backplane System integration Allen-Bradley Backplane Backplanes designed for minimum overall life cycle costs Simple, reliable and professional design Using standard cost-optimised DIN-rail devices Flexible

More information

Select a FLEX I/O Terminal Base Unit

Select a FLEX I/O Terminal Base Unit Section 1.4 Select a FLEX I/O Terminal Base Unit Step 3 Select: the appropriate terminal base unit for your module and system Each FLEX I/O module requires a terminal base unit that snaps onto the DIN

More information

Australian Declaration of Conformity

Australian Declaration of Conformity Australian Declaration of Conformity The undersigned, representing the following Manufacturer and the RA Authorised Supplier within Australia Rockwell Automation, Inc. 0 South nd Street Milwaukee, WI 5304

More information

CIS-331 Exam 2 Fall 2015 Total of 105 Points Version 1

CIS-331 Exam 2 Fall 2015 Total of 105 Points Version 1 Version 1 1. (20 Points) Given the class A network address 117.0.0.0 will be divided into multiple subnets. a. (5 Points) How many bits will be necessary to address 4,000 subnets? b. (5 Points) What is

More information

SIMATIC. Process Control System PCS 7 Released modules (V8.0) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6.

SIMATIC. Process Control System PCS 7 Released modules (V8.0) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6. ET 200M 1 Gateway 2 SIMATIC rocess Control System CS 7 Catalog Overview ET 200S 3 ET 200iS 4 ET 200S 5 ET 200X 6 ET 200pro 7 Repeater 8 Network Components 9 C 10 C-based automation 11 CS 7 12 S7-300 13

More information

R1M-GH THERMOCOUPLE & DC INPUT MODULE MODEL. Remote I/O R1M Series. (16 points)

R1M-GH THERMOCOUPLE & DC INPUT MODULE MODEL. Remote I/O R1M Series. (16 points) Remote I/O R1M Series THERMOCOUPLE & DC INPUT MODULE (16 points) MODEL MODEL & SUFFIX CODE SELECTION R1MGH2T MODEL Modbus protocol I/O TYPE GH2 : Thermocouple or DC input, 16 points FIELD TERMINAL TYPE

More information

Digital Lighting Systems, Inc. CD400-DMX DMX512 Four Channel Dimmer and Switch module

Digital Lighting Systems, Inc. CD400-DMX DMX512 Four Channel Dimmer and Switch module , Inc. DMX512 Four Channel Dimmer and Switch module Input: 5 Amps @ 6-24 VDC Outputs: 5 Amps Maximum each, total 4 outputs 8 Amps Maximum. FRONT BACK USER'S MANUAL -UM User's Manual - Page 1 GENERAL DESCRIPTION

More information

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6.

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6. ET 200M 1 Gateway 2 SIMATIC rocess Control System CS 7 Catalog Overview ET 200S 3 ET 200iS 4 ET 200S 5 ET 200X 6 ET 200pro 7 Repeater 8 Network Components 9 C 10 C-based automation 11 CS 7 12 S7-300 13

More information

Select a FLEX I/O Terminal Base Unit

Select a FLEX I/O Terminal Base Unit Section 1.4 Select a FLEX I/O Terminal Base Unit Step 3 Select: the appropriate terminal base unit for your module and system Each FLEX I/O module requires a terminal base unit that snaps onto the DIN

More information

Logix Controllers Comparison

Logix Controllers Comparison Logix Controllers Comparison Characteristic 1756 ControlLogix 1756 GuardLogix Controller tasks: Continuous Periodic Event User memory Nonvolatile user memory Built-in communication ports Communication

More information

CheckSum. FUNC-2B Functional Test Module. The FUNC-2B features:

CheckSum. FUNC-2B Functional Test Module. The FUNC-2B features: CheckSum FUNC-2B Functional Test Module FUNC-2B Functional Test Module Made in U.S.A. The CheckSum Model FUNC-2B Functional Test System is designed to be used as an extension to a CheckSum ICT System.

More information

Digital Lighting Systems, Inc. PD405-DMX. Four Channel Dimmer and Switch Packs. DMX512 compatible. PD405-DMX-24DC DMX512 4 x 5 Amps Dimmer Pack

Digital Lighting Systems, Inc. PD405-DMX. Four Channel Dimmer and Switch Packs. DMX512 compatible. PD405-DMX-24DC DMX512 4 x 5 Amps Dimmer Pack Digital Lighting Systems, Inc. PD405DMX Four Channel Dimmer and Switch Packs DMX52 compatible PD405DMX24DC DMX52 4 x 5 Amps Dimmer Pack C UL US LISTED www.digitallighting.com Digital Lighting Systems,

More information

Installation Instructions

Installation Instructions Installation Instructions Cat. No. 1771-IQ16 Series C This document provides information on: The dc isolated input module is shipped in static-shielded packaging to guard against electrostatic discharge

More information

Advantages for the MicroLogix 1500 Controller (in addition to MicroLogix 1200 controller features)

Advantages for the MicroLogix 1500 Controller (in addition to MicroLogix 1200 controller features) MicroLogix Programmable Controllers Overview 13 Advantages for the MicroLogix 1500 Controller (in addition to MicroLogix 1200 controller features) Large memory to solve a variety of applications. 1764-LSP:

More information

Select a FLEX I/O Terminal Base Unit

Select a FLEX I/O Terminal Base Unit Section 1.4 Select a FLEX I/O Terminal Base Unit Step 3 Select: the appropriate terminal base unit for your module and system Each FLEX I/O module requires a terminal base unit that snaps onto the DIN

More information

Available Modules Expansion I/O Modules. Select MicroLogix 1100 Expansion I/O 51. Digital. 8-Point 120V AC Input Module

Available Modules Expansion I/O Modules. Select MicroLogix 1100 Expansion I/O 51. Digital. 8-Point 120V AC Input Module Select MicroLogix 1100 Expansion I/O 51 Available Modules 1762 Expansion I/O Modules Cat. No. Digital 1762-IA8 1762-IQ8 1762-IQ8OW6 1762-IQ16 1762-OA8 1762-OB8 1762-OB16 1762-OW8 1762-OW16 1762-OX6I 1762-OV32T

More information

1769 Compact I/O Communication Bus Expansion Cables

1769 Compact I/O Communication Bus Expansion Cables 1769 Compact I/O Communication Bus Expansion Cables (Cat. No. 1769-CRR1, 1769-CRR3, 1769-CLL1, 1769-CLL3, 1769-CRL1, 1769-CRL3) Installation Inside... For More Information... 2 Hazardous Location Considerations...

More information

Micro800 Programmable Controllers, Plug-In Modules, and Accessories. Bulletin 2080 Selection Guide

Micro800 Programmable Controllers, Plug-In Modules, and Accessories. Bulletin 2080 Selection Guide Micro800 Programmable Controllers, Plug-In Modules, and Accessories Bulletin 2080 Selection Guide Important User Information Solid state equipment has operational characteristics differing from those of

More information

SIRIUS modular system

SIRIUS modular system SIRIUS modular system Switching, protecting, starting and monitoring with the highly flexible modular system siemens.com/sirius Everything for the control cabinet: the SIRIUS modular system. Press shop

More information

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) Security information 1 ET 200M 2. Gateway 3 ET 200S 4. ET 200iSP 5 ET 200S 6

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) Security information 1 ET 200M 2. Gateway 3 ET 200S 4. ET 200iSP 5 ET 200S 6 Security information 1 ET 200M 2 SIMATIC rocess Control System CS 7 Offer overview Gateway 3 ET 200S 4 ET 200iS 5 ET 200S 6 ET 200X 7 ET 200pro 8 Repeater 9 Network Components 10 C 11 C-based automation

More information

SLC 500 Systems. Bulletin 1746 and Selection Guide

SLC 500 Systems. Bulletin 1746 and Selection Guide SLC 500 Systems ulletin 1746 and 1747 Selection Guide 2 SLC 500 Systems Selection Guide enefits Powerful, yet affordable - SLC 500 programmable controllers provide excellent value with extensive capabilities

More information

SIRIUS modular system

SIRIUS modular system SIRIUS modular system Switching, protecting, starting and monitoring with the highly flexible modular system siemens.com/sirius Everything for the control cabinet: the SIRIUS modular system. Press shop

More information

Installation and Wiring

Installation and Wiring Wiring 2 2 Plan for Safety Safety Techniques WARNING: Providing a safe operating environment for personnel and equipment is your responsibility and should be your primary goal during system planning and

More information

CIS-331 Exam 2 Fall 2014 Total of 105 Points. Version 1

CIS-331 Exam 2 Fall 2014 Total of 105 Points. Version 1 Version 1 1. (20 Points) Given the class A network address 119.0.0.0 will be divided into a maximum of 15,900 subnets. a. (5 Points) How many bits will be necessary to address the 15,900 subnets? b. (5

More information

The cache is 4-way set associative, with 4-byte blocks, and 16 total lines

The cache is 4-way set associative, with 4-byte blocks, and 16 total lines Sample Problem 1 Assume the following memory setup: Virtual addresses are 20 bits wide Physical addresses are 15 bits wide The page size if 1KB (2 10 bytes) The TLB is 2-way set associative, with 8 total

More information

ZN-DN312XE-M Quick User Guide

ZN-DN312XE-M Quick User Guide ZN-DN312XE-M Quick User Guide This manual provides instructions for quick installation and basic configuration of your IP device. Step1. Connect cables to IP device Connect required cables to the device

More information

Analog I/O Module Summary

Analog I/O Module Summary 36 Select FLEX I/O Modules Analog I/O Module Summary Catalog Number Inputs Outputs Terminal Base Unit Module Type 1794-IE8 8 1794-TB2, 1794-TB3, 1794-TB3S, 1794-TB3T, Selectable, non-isolated inputs 1794-IE8XT

More information