In Win. Storage Chassis 4-Port 6Gb/s SAS/SATA Backplane 3RAMPD User s Manual 10/02/2012

Transcription

1 In Win Storage Chassis 4-Port 6Gb/s SAS/SATA Backplane User s Manual 10/02/2012 No. 57 LANE 350,NANSHANG ROAD,GUEISHAN HSIANG, TAOYUAN HSIEN,,TAIWAN, R.O.C Tel: Fax:

2 Copyright Copyright 2012 IN WIN DEVELOPMENT INC., Ltd... All rights reserved. Unless otherwise indicated, all materials in this manual are copyrighted by IN WIN DEVELOPMENT INC., All Rights Reserved. No part of this manual, either text or image may be used for any purpose other than internal use within purchasing company. Therefore, reproduction, modification in any form or by any means, electronic, mechanical or otherwise, for reasons other than internal use, is strictly prohibited without prior written permission. IN WIN DEVELOPMENT INC., reserves the right to make improvement and modification to the products indicated in this manual at any time. Specifications are therefore subject to change without prior notice. Information provided in this manual is intended to be accurate and reliable. However, IN WIN DEVELOPMENT INC., assumes no responsibility for its use, nor for any infringements upon the rights of third parties, which may result from its use. Technical Support In win works hard to offer our customers maximum performance from our chassis. But in case you haveany problem with our product you can find supports from the following resources. Web Support Detail information of our products is in our website. You can find technical updates, installation guides, FAQs technical specifications and more. Our web address is: Phone Support You can also contact In Win HQ or branch office for immediate support; contact Information is as following: In Win HQ In Win USA In Win UK In Win NL Tel: Tel: Tel:+44(0) Tel:+31(0) Fax: Fax: Fax:+44(0) Fax:+31(0) In Win Development Inc. reserves the right to make final modifications. 2

3 Contents Technical Support Copyright Revision History Backplane Specification Backplane Layout Backplane Assembly In Win Development Inc. reserves the right to make final modifications. 3

4 Revision History Date Oct/02/2012 Modification First release(v1.0) In Win Development Inc. reserves the right to make final modifications. 4

5 6Gb/s Backplane Specification P/N: (Version A0) PCB DIMENSION : 417.5mm X 33 mm X 1.6mm PCB LAYERS : 4 COMMUNICATION INTERFACE : SATA/SAS 6.0Gbit/s COMPATIBLE INTERFACE DC POWER CONNECTOR : 2 SATA HDD 29 PIN CONNECTOR : 4 SATA HDD 7 PIN CONNECTOR : 4 FAN CONNECTOR (4PIN) : 12 (PWM TYPE) A X 12 PCS ON BOARD LED : (A) HDD POWER LED (BLUE) WHEN HDD INSERT ACTIVE (B) HDD ACCESS / FAIL LED (GREEN / RED) WHEN HDD R/W ACTIVE (GREEN) WHEN HDD FAIL ACTIVE (RED) SGPIO CONNECTOR : 1(8PIN) SGPIO SETTING (A) DISABLE (B) ENABLE ACCESS SINNAL : Always from device HDD FAIL SIGNAL INPUT CONNECTOR : 1 TEMPERATURE SETTING (A) 28 fan speed 70% (B) 38 fan speed 100% Temperature Alarm : 47 (When the temperature is less than the temperature of 44 C, automatic discharge alarm) FAN SPEED CONTROL : 2 TYPE (A) AUTO ---- By Temperature (B) MANUAL (a) 60% : 60% of the max fan speed (b) 80% : 80%of the max fan speed ALARM BUZZER (A) Fan fail(single beep) (B) Temperature fail(double beep) Accommodation Chassis RS In Win Development Inc. reserves the right to make final modifications. 5

6 Backplane Layout (A) Power Connector x 2 Pin No. Descriptions 1 12V 2 GND 3 GND 4 5V Remark: When the voltage is not enough, can add to connect one S4P(A1) DC-in power (B) Fan Connector Pin No. Descriptions 1 GND 2 +12V 3 Fan Clock Input 4 Fan PWN Output In Win Development Inc. reserves the right to make final modifications. 6

7 (C) Fan Setting 4-port 6Gb/s SAS/SATA backplane User s Manual Jumper Setting Description 1-2 Short Alarm Reset 3-4 Short Fan speed max 60% by temperature control Fan speed Minimize about 42% to Maximize 60% 5-6 Short Fan speed max 80% by temperature control Fan speed Minimize about 56% to Maximize 80% 3-4 & 5-6 Open Default rpm from 73%/25C to 100%/35C 7-8 Short Temperature Fault set 55C (D) SGPIO SIGNAL CONNECTOR Pin No. Descriptions Pin No. Descriptions 1 NC 5 SG_LD 2 SG_DI 6 GND 3 GND 7 SG_CK 4 SG_DO 8 GND In Win Development Inc. reserves the right to make final modifications. 7

8 (E) SGPIO CODE PROGRAMMING PIN (F) HDD Fail signal input Pin No. Descriptions 1 HDD1 2 HDD2 3 HDD3 4 HDD4 (G) SGPIO Setting Pin No. Descriptions 1/2 SGPIO Disable 2/3 SGPIO Enable (H) DC output connector for Slim CD-ROM power supply (I) SATA HDD 7 PIN CONNECTOR x4 In Win Development Inc. reserves the right to make final modifications. 8

9 LED indicator 4-port 6Gb/s SAS/SATA backplane User s Manual LED Status Color Power Led Power On Blue HDD Led Active Green HDD Led Fail Red Backplane Assembly The In Win 4-Port 6Gb/s Backplane can be assembled on In Win Storage Server Chassis RS Please refer to the chassis Quick Installation Guide. In Win Development Inc. reserves the right to make final modifications. 9