Pre-terminated Multi Fibre Cable Assemblies

Transcription

1 AFL manufactures a broad range of factory terminated and tested multi-fibre cable assemblies. These assemblies are available in various fibre types and counts, cable constructions and connector options. Pre-terminated fibre optic cable assemblies are suitable for horizontal or vertical deployment in a range of applications. Pre-terminated cables offer the advantage of reduced time and cost associated with on-site cable breakout and connector terminations. They are ideally suited where narrow installation timeframes are applicable or on-site terminations are hazardous or pose OH&S issues. Features High quality, machine polished connectors for consistent low loss performance Geometry-compliant connector endfaces offer low loss repeatability and intermateability Standards-based testing practices provide repeatable and traceable results Video-based inspection ensures connector endfaces are free of defects and contamination Large stocked range of multifibre cable constructions and connectors for fast turnaround times Individual packaging and labelling provides protection, test data and traceability Various construction options including glanding, labelling and polarity options Reduced equipment cost, training and skill base required for installation Faster and less disruptive installations 67

2 Manufacturing Options FIBRE TYPE RISER CONSTRUCTION ROUND MINI (RM) 3 MM CONSTRUCTION BREAKOUT CONSTRUCTION OS1/2 (SM 9/125 μm) 4-24F (Yellow sheath) 12F (Yellow sheath) 2-12 (Black or yellow sheath) OM1 (MM 62.5/125 μm) 4-24F (Orange sheath) 12F (Orange sheath) 2-12 (Black sheath) OM3 (MM 50/125 μm) 4-24F (Aqua sheath) 12F (Aqua sheath) 6, 12 (Aqua sheath) OM4 (MM 50/125 μm) 4-24F (Aqua sheath) 12F/48F (Aqua sheath) 6, 12 (Aqua sheath) Other cable constructions, fibre counts and sheath colours are available upon request, MOQ and lead times may apply. CONNECTORS SC/UPC LC/UPC LC/UPC KEYED FC/UPC ST/UPC MTRJ SC/APC LC/APC FC/APC Oversleeving Oversleeving provides additional mechanical protection over 900 µm tight buffered fibres 2 mm yellow, orange and aqua 2 mm aqua duplex (suits RM construction only) 3 mm yellow and orange Other colours also stocked or available upon request Additional Options Customised connector breakout lengths between 400 mm and 3 m Hybrid connector terminations Staggered connectors Cable glands Custom numbering, labelling and pair flipping/x-over Hauling and Protective Mechanisms Heavy duty hauling mechanism suits riser style cables Medium duty hauling mechanism suits riser and breakout cables Light duty protective mechanism suits riser and breakout cables 68

3 Connector Options CONNECTORS LC LC MM OM1 Simplex LC MM OM1 Duplex LC MM OM3/4 Simplex LC MM OM3/4 Duplex LC SM Simplex LC SM Duplex LC/APC SM Simplex LC Duplex Keyed SC SC MM OM1 Simplex SC MM OM3/4 Simplex ST SC SM Simplex ST MM OM1 Simplex SC/APC SM Simplex ST MM OM3/4 Simplex FC ST SM Simplex FC MM Simplex FC SM Simplex MTRJ Other FC/APC SM Simplex MTRJ MM Duplex DIN/PC SM Simplex MTRJ SM Duplex 69

4 Specifications ASSEMBLY DIMENSIONS Breakout length is measured from the fibre breakout point to the connector ferrule cable assembly length is measured from connector to connector (including the breakout length). End A Breakout Point End B Breakout Length Cable Assembly Length Breakout Length CONNECTOR STAGGERING Staggering is required when a protective hauling mechanism is used also available as a stand-alone option. Staggered connectors are paired and spaced 60 mm apart. Unless specified otherwise, the pairs follow the standard colour code and numbering: blue/orange, green/brown, grey/white etc. with pair 1 blue/orange being the longest breakout length. Heavy Duty Hauling Mechanism Light Duty Connector Protection Mechanism HAULING AND PROTECTIVE/PLACEMENT MECHANISMS MATERIAL AND CONSTRUCTION OUTER DIAMETER (MM) ADVANTAGES LIMITATIONS Hauling Heavy Duty* (for riser construction ) Hauling Medium Duty* (for riser and breakout construction) Protective Light Duty* (for riser and breakout construction) Nylon braiding with inner protective foam tubing and cable kevlar pulling loop Clear, flexible, non-kinking tubing with cable kevlar pulling loop. 20 mm tubing has 16 mm gland. 25 mm tubing has 20 mm gland. Clear, flexible, non-kinking tubing 50 mm > 24 F Hauling force is directly applied to cable kevlar allowing for cable rated pulling force 20 mm > 6 F 25 mm > 12 F 20 mm > 6 F 25 mm >12 F Hauling force is directly applied to cable kevlar allowing for cable rated pulling force. Low level moisture protection. Low cost, easily removed connector protection Not recommended for use in ducting or conduit smaller than 100 mm Not recommended for use in ducting or conduit smaller than 100 mm. Cable gland cannot be removed. Fibre breakout and connector protection only Fibre ID# Colour 1 BLUE 2 ORANGE 3 GREEN 4 BROWN 5 SLATE 6 WHITE 7 RED 8 BLACK 9 YELLOW 10 VIOLET 11 ROSE 12 AQUA 70

5 Specifications (Continued) RMB4LCLC5M-12-3H11 LC-LC 48 F OM4 pre-terminated bundled round mini 5 m, 500 mm breakouts with 2 mm duplex zero fibre oversleeving both ends. RUF1SCSC20M SC SC 12 fibre singlemode pre-terminated riser cable 20 m, 500 mm breakouts with 3 mm yellow zero fibre oversleeving both ends, cable glands both ends CONNECTOR PERFORMANCE LC, SC, ST and FC connectors* Multimode Single-mode at 850 and 1300 nm LL (Low Loss) at 850 and 1300 nm UPC at 1310 and 1550 nm APC at 1310 and 1550 nm Average Max Average Max Average Max/Min Average Max/Min Insertion Loss (db) Max Max Max Max Return Loss (db) Min Min * Please contact AFL for connector performance of other connectors TESTING AND APPLICABLE STANDARDS As per the above table, maximum connector insertion losses (IL) fall well below the maximum connector IL allowed under AS/NZS ISO/IEC Multimode assemblies are bi-directionally link loss tested as per the requirements of AS/NZS ISO/IEC Single-mode assemblies are connector IL and return loss (RL) tested at both 1310 and 1550 nm as per ANSI/TIA/EIA /107A. Pigtails or non standard assemblies are OTDR single direction tested at either MM 850/1300 nm or SM 1310/1550 nm wavelengths. All UPC and APC Single-mode connectors exceed the RL and geometry requirements of GR-326-CORE (Generic Requirements for Singlemode Optical Connectors and Jumper Assemblies). All connector endface conditions exceed the visual inspection criteria of IEC and AS/NZS ISO/IEC All test cords used for connector IL and RL testing are reference grade as per AS/NZS ISO/IEC specifications. All test/master cords are inspected and cleaned prior to each connector test. Multimode test launch conditions comply with ISO/IEC , Amd.1 and IEC All testing adapters used are of Single-mode grade with high tolerance ceramic sleeves. All assemblies meet the requirements of AS/ACIF S008 (Requirements for customer cabling products/acma). TIA/EIA 455 standard test procedures apply to all AFL cable assemblies and components. 71

6 Specifications (Continued) FIBRE PERFORMANCE Core/Cladding Diameter (μm) Wavelength (nm) Industry Standard Designation(s) 62.5/125 (850/1310) OM1 ISO/IEC 50/125 (850/1310) OM3 ISO/IEC 50/125 (850/1310) OM4 ISO/IEC 9/125 Zero Water Peak (ZWP) Singlemode 9/125 Bend-Insensitive Single-mode (1310/1550) ITU-T G.652.D OS1/2 ISO/IEC (1310/1550) ITU-T G.657.A OS1/2 ISO/IEC GigE Distance (m) 10GigE Distance (m) Maximum Cabled Attenuation (db/km) Minimum Laser Bandwidth (MHz-km) Minimum LED Bandwidth (MHz-km) 300/ (850 nm) 3.5/ / / / (850 nm) 3.0/ / / / (850 nm) 3.0/ / /500 5 km 10 km (1310 nm) 0.5/0.5 5 km 10 km (1310 nm) 0.5/0.5 Assembly Configuration Options Oversleeved LC Duplex to Oversleeved LC Duplex Pair-wise flip -, - etc. Part No. R4LCLCxxM 12 3C11 Oversleeved LC Duplex to Oversleeved SC/ST Simplex -, -, - etc. Part No. R4SCLCxxM 12 3C11 Oversleeved SC/ST Simplex to 900µm Non-oversleeved SC/ST/LC Simplex 1-Blue, 2-Orange, 3-Green etc. Part No. R1SCSCxxM Oversleeved LC Simplex to 900µm Non-oversleeved SC/ST/LC Simplex -Blue, -Orange, -Green etc. Part No. R1SCLCxxM

7 Part Numbers Oversleeving 1 Not Required 2 PVC tubing, end A (MTRJ only) 3 PVC tubing, end A&B (MTRJ only) 4 Yellow 3 mm end A 5 Yellow 3 mm end A&B 6 Orange 3 mm end A 7 Orange 3 mm end A&B 8 Yellow 2 mm end A 9 Yellow 2 mm end A&B A Orange 2 mm end A B Orange 2 mm end A&B C Aqua 2 mm end A D Aqua 2 mm end A&B H Aqua 2 mm DUPLEX zero tubing, end A & B RM & RRM cables only I Yellow 2 mm DUPLEX zero tubing, end A & B RM & RRM cables only Drum 1 Not required 2 Drum (for over 40 m) P (A) (B) R 1 SC LC 25M Only for Pigtails Cable Type R LSZH Riser RUF LSZH UF Series Riser < 12 F RUD LSZH UD Series Riser > 12 F B Breakout cable RM Round Mini (3 mm) RMB Round Mini Bundled RRM Ruggedised RB Ribbon Round Mini Fibre Type 1 9/125 μm 2 9/125 μm MIL 3 50/125 μm OM3 4 50/125 μm OM /125 μm /125 μm MIL Connector Type (A&B) SC SCA ST LC LCA LCK FC FCA MTRJM (MTRJ male) MTRJF (MTRJ female) Length (m) Fibre Count Breakout Length mm mm (recommended min) mm mm (recommended length for Wingback enclosures) mm mm mm mm mm A No Breakout B 1000 mm C 4000 mm Installation Options* 1 Not Required 2 Light duty protective mech end A 3 Light duty protective mech end A&B 4 Heavy duty hauling mech end A 5 Heavy duty hauling mech end A&B 6 Staggered, no hauling mechanism 7 20 mm gland fitted end A 8 20 mm gland fitted end A&B A Medium duty hauling mech end A B Medium duty hauling mechanism end A&B (Options A&B 25 mm OD) C Medium duty hauling mechanism end A D Medium duty hauling mechanism end A&B (Options C&D 30 mm OD) 73