Service Bulletin Backup and restore Hard Disk Drive

Size: px

Start display at page:

Download "Service Bulletin Backup and restore Hard Disk Drive"

Marjorie Robbins
6 years ago
Views:

1 Service Bulletin Backup and restore Hard Disk Drive Flow explanation START

adapter Perform Backup or Restore 1 2 3 4 5 Specify the type of

2 Flow of the Data Backup or Restore procedure for a Sakura instrument Hard Disc Drive Select the Instrument Connect the USB adapter Perform Backup or Restore Specify the type of Hard Disk Drive (HDD) Select if you want to Backup or if you want to Restore 2 START

3 What instrument are you working on? Xpress x120 Xpress x50 VisionTek AutoTEC AutoTEC a120 3

4 Do you have a Hard Disk Drive (HDD) with IDE or with Serial ATA connection? IDE Serial ATA 4

5 Preparing an IDE HDD You need to have the following parts from the adapter kit: 5 USB cable HDD USB adapter

6 1. Shutdown the x Remove the upper panel to get access to the control part of the x Remove the 40-pol IDE flat cable from the HDD, leave the power connector in place. 4. Connect the USB cable to the adapter. 5. Connect the adapter to the HDD

7 6. The adapter has now been installed. 7

8 7. Switch on the x120 Power will be supplied by the internal PC power supply to the HDD. 8. Switch on your Notebook. 9. Connect the USB connector of the adapter to your Notebook. 10. You have now a connection with the HDD. 9 8 HDD in x120 USB adapter Your notebook

9 Use of Macrium Reflect 1. Start the program 2. Confirm the User Account Control message with Yes 9

10 3. You are now on the basic screen of Macrium Reflect. Your Notebook HDD Action buttons Backup/Restore button The USB HDD Instructions on next page 10

11 What do you want to do? Backup Restore 11 Backup means you make a copy of the Hard Disc Drive and store the backup file on your connected PC Restore means you put a Backup from your connected PC to the Hard Disc Drive in the instrument

12 4. Click on the USB disk to move the action Buttons below the disk. 4. Click here on your PC to see action buttons below the disk. 12

13 5. Click on 5. Click here 13

14 6. Select a folder and a name and press <Finish> 6-2. Uncheck if you want to select your own filename 6-1. Select folder 6-3. Edit filename Click Finish

15 7. Finalize settings 7-1. Uncheck Save backup 7-2. Click OK 15

16 8. Backup is running 16

17 9. and is ready Click on <OK> 9-2. then on <Close> 17

18 10. Please close the application now 11. You can find the created file in the folder you specified. 12. Switch the x120 off via the main switch. 13. Remove the USB adapter from the HDD and reconnect the original cable from the x

19 14. Switch on the x120 by the main switch 15. The x120 should start normally. 16. The x120 image file on your PC is normally just 1 GB and will fit perfectly on a USB stick. 17. Copy it to a USB stick. 18. Leave the USB stick on top of the HDD inside the unit and you are prepared for the next HDD crash. You are ready with your backup! Well done! 19

20 4. Click in the menu on <Re and then on 4. Click on <Browse for an image > 20

21 5. Search for the image/backup file and select it. 6. Click on. 6. Click on <Open> 21

22 7. The image will appear below your detected hard drives. 8. Click now on. 8. Click here 22

23 9. Click in the new window on. 9. Click here 23

24 10. Your local hard drives will appear. 11. Select the destination drive. Normally this is the drive on the bottom. If you are unsure about the right drive please first check the name of the drive! Name of the drive. 11. Select destination drive. 24

25 12. Check the destination drive once more to be sure that you not overwrite your local PC hard drive. Name of destination drive. 25

26 13. Start the restore procedure by a click on. 13. Click on <Next> 26

27 14. Click on on the next page 14. Click on <Finish> 27

28 15. Restore will start 28

29 16. and will be completed after a while. 17. Click on. 17. Click on <OK> 29

30 18. Click on. 18. Click on <Close> 30

31 19. Please close the application now 20. Switch the x120 off via the main switch. 21. Remove the USB adapter from the HDD and reconnect the original cable from the x Switch on the x120. The unit should start normally. You are ready with the restore! Well done! 31

32 Preparing an IDE HDD You need to have the following parts from the adapter kit: 32 USB cable SATA cable HDD USB adapter

33 1. Shutdown the x Remove the upper panel to get access to the control part of the x Remove the red SATA cable from the HDD, leave the power connector in place. 4. Connect the USB and the SATA cable to the adapter. 5. Connect the adapter to the HDD

34 6. The adapter has now been installed. 34

35 7. 6. Click on <Open> 35

36 What is the instrument? Backup Restore 36

37 37

38 You are ready with the selected task

39 Still under construction

Migrating Eclipse.net from SQL Server 2005 to SQL Server 2008

Migrating Eclipse.net from SQL Server 2005 to SQL Server 2008 Purpose: This document describes the recommended method of the migration of the Eclipse.net SQL database from Microsoft SQL Server 2005 to 2008. Micro Librarian Systems LTD Page 1 of 6 Support: www.microlib.co.uk/mymls