GRID/PRSHT/MU320/EN/1.2014/GBR/1894 ALSTOM All rights reserved.

Size: px
Start display at page:

Download "GRID/PRSHT/MU320/EN/1.2014/GBR/1894 ALSTOM All rights reserved."

Transcription

1 GRID/PRSHT/MU320/EN/1.2014/GBR/1894 ALSTOM All rights reserved.

2

3

4 GRID/PRSHT/MU320/EN/1.2014/GBR/1894 ALSTOM All rights reserved.

5 MEASUREMENT PRODUCT SOLUTIONS Reason RPV311 Digital fault recorder with fault location and PMU GRID/PRSHT/RPV311/EN/1.2014/GBR/1893 ALSTOM All rights reserved. The Reason RPV311 is the most powerful electrical system monitoring, recording and analysis device. Phasor measurement, power quality, precision fault location and process bus options deliver the highest integration capabilities for digital substation and widearea schemes (WAMS). CUSTOMER BENEFITS Flexible and scalable: excels in even the most demanding applications Suitable for both distributed and centralised architectures Digital substation ready Measures both AC and DC analogue inputs Precision fault location with TWFL A multifunction digital recorder solution that allows distributed or centralised installation The solution is composed of the RPV processing unit and remote acquisition units RA331, RA332 and/or RA333. It acquires monitors and records electrical quantities in applications where high performance, modularity, flexibility and high channels counts are demanded. The RPV is the most complete solution on the market for digital substation applications, thanks to its powerful suite of integrated functions, coupled with the scalability of the hardware. FUNCTIONALITY AVAILABLE Fault recorder Disturbance recorder Continuous recorder (waveform and RMS) Phasor Measurement Unit (PMU) Steady-state recorder Power Quality Recorder Sequence of events recorder Grid-SAS-L3-RPV _01-EN. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited. Alstom contributes to the protection of the environment. This leaflet is printed on environmentally friendly paper. Real time monitor Travelling wave-based fault locator (TWFL) Process bus (IEC LE) recorder DC to 3 khz measurement IEC support

6 RPV architecture The RPV architecture is comprised of separate processing and measurement acquisition units, which communicate using dedicated fibre-optic links of up to 2km, allowing flexible installation and mounting. It is possible to install all the units in one panel, in a centralised solution, or it is also possible to install the acquisition units in the protection panels, communicating to one central processing unit. In the distributed architecture the electrical cabling is reduced, since it is not necessary to take all signals to one concentrated DFR panel. The RPV processing unit can be connected to either up to 8 RA331 Remote Acquisition Units, or to up to 4 RA332, or to up to 4 RA333, or a combination of them. Each RA331 can have up to 8 analogue inputs and 32 digital inputs, each RA332 can have up to 16 analogue inputs and 32 digital inputs, and each RA333 can have, in addition to the 3 default voltage high speed travelling-wave acquisition inputs, up to 8 analogue inputs and 16 digital inputs. The RPV processing unit can also accept sample data inputs of analogue signals and digital inputs from IEC merging units. The RPV can be connected to a combination of inputs from RA33x acquisition units and merging units. Communications The RPV is fitted with 2 network Ethernet ports for communication to two separate networks or for redundant communications. Both copper and fibre (optional) ports are available. A third network Ethernet port for IEC LE communications is available. Modbus, DNP3 and IEC protocols are implemented for integration with SCADA and DCS systems. An RS232C serial port is included for Modem communications. Signalling outputs Available are 4 dry contact relays for remote signalling one of which is used by the device self-monitoring watchdog. The other 3 outputs are user configurable. Local interface The local interface consists of 4 buttons used to navigate the LCD display to show the unit status, monitor the measurement values, identify which record files have been generated, etc. Remote interface There is an integrated web-based graphical interface for monitoring and configuration of the RPV units. The web-based interface allows the configuration of all features of the RPV311 either directly connected or via a remote Ethernet link. A standalone version of the configuration system is also available as part of the supplied RPV software tools to allow the configuration to be developed offline without the need to be connected to a physical unit. The configuration produced offline can be stored and then downloaded to multiple units using the web-based interface. The monitoring interface allows measurements being generated by the RPV311 to be viewed without any other monitoring software needing to be available. This is particularly useful during commissioning when the RPV311 will probably be the first system commissioned. The total number of input channels available in the scheme is 64 analogue inputs (current, voltage and DC transducer signals), 256 digital inputs and in addition up to 256 binary inputs related to GOOSE messages. The analogue inputs are sampled at 256 samples per cycle and have a frequency response of DC to 3 khz. The RPV is fitted with a 50GB solid state memory drive (SSD), and is time synchronised by connection to an external IRIG-B reference or using SNTP over Ethernet. Web-monitoring example: Trending of analogue quantities CAPTION_WHITE_lore_ipsum_(Optional)

7 MEASUREMENT PRODUCT SOLUTIONS RPV311 Process bus applications with IEC The RPV is ready for sampled value applications according to IEC LE. The distributed architecture of the scheme, whereby the RPV central unit subscribes to data from local or remote acquisition units means that the user can specify the MU320 as the chosen acquisition unit, or can subscribe directly to other merging units or digital instrument transformers which are publishers of sampled value data streams. Interoperability is assured with Alstom s own MU320 and MU Agile merging units, the COSI range of digital instrument transformers, plus third party devices compliant to the standard. Conventional instrument transformers may be hardwired to RA33x or MU320 acquisition units, at the same time as other measurements are obtained from digital instrument transformers, allowing a mix of transformer technologies within a scheme. Such flexibility permits standardisation of the DFR solution across substations employing different primary technology generations; it prepares for future substation extensions, and allows a migration path to the full digital substation. The MU320 merging unit used to digitise the output of conventional CT and VTs has the advantage that it performs both an analogue merging unit function and binary I/O marshalling. It may be termed an integrated merging unit, making it particularly cost-effective in applications requiring bay measurements and switchgear control and monitoring in a single intelligent device. As per the RA33x, the MU320 may be deployed in a distributed scheme whereby it performs the plant interfacing in yard kiosks close to the switchgear. RA33x technology and DC applications The RA33x acquisition units use intelligent shunt measurement with optical isolation between the external world and the internal electronics. This extends Alstom s leadership in digital instrument transformer (DIT) technology, such that the measurement circuit becomes a DIT in the box. The acquisition circuit is thus transformerless, with no core to magnetise, no core to saturate, and hence negligible error. Such greater accuracy is important in high-precision measurement and phasor applications, whilst also permitting DC quantities to be measured. The analogue acquisition in the scheme produces a more accurate representation of DC and harmonic components in AC applications, also supporting full DC application too. References exist for Reason DFR solutions deployed in HVDC installations. The solution right from simple applications up to the full digital substation.

8 PHASOR MEASUREMENT UNIT (PMU) The RPV is able to construct accurate synchrophasor data based on the incoming measurements from the scheme s acquisition units. This makes the solution highly scalable in terms of the number of analogue channels and phasors available. The scalability from small to large substations is achieved by means of additional acquisition units to accommodate the number of feeders, which is more cost-optimised than the addition of multiple discrete PMUs. Further advantages are achieved in that the Phasor Data Concentrator (PDC) only needs to connect to a single point in the substation (the RPV, which also acts as the Substation Phasor Data Concentrator - spdc) rather than requiring a connection to multiple discrete devices. Integrating the PMU function is an ideal way to make use of the measurement accuracy, the precision time distribution, and the communication architecture already provided within our DFR scheme, negating the requirement to install a duplicate architecture solely for PMU purposes. The RPV synchrophasor measurement and publishing are carried out according to IEEE C37.118, the standard for synchrophasors in power systems. The reported values are freely selectable by the user and include voltages and currents, positive and negative sequences for voltage and current circuits, frequency, scalar quantities such as DC signals, RMS values, voltage and current imbalances and THD, and the status of any digital channel. The RPV has been tested by NIST. The RPV (PMU) is designed to monitor entire substations and power plants. In process bus architectures, the RPV acts as a smart protocol conversion from IEC to IEEE C RECORDERS The disturbance and fault (waveform) recorders are enabled by using triggers which can be generated from analogue, digital and virtual (GOOSE) inputs. The continuous recorder generates records with 16 points-per-cycle sampling rate (waveform) and 1 pointper-cycle sampling rate (magnitude, phase, RMS, frequency, positive and negative sequence, imbalance, THD, and apparent, active and reactive power). The continuous recorders are very useful tools for monitoring long term oscillations and wide area events. DFR topology example CAPTION_WHITE_lore_ipsum_(Optional)

9 MEASUREMENT PRODUCT SOLUTIONS RPV311 TRAVELLING WAVE FAULT LOCATION Travelling wave (TW) fault location (TWFL) is a particularly efficient way to define precisely where a fault occurred on a transmission line, to locate it to the vicinity of a particular tower, or span length of conductors. Such accuracy to within a few hundreds of metres of the actual fault point is not possible to achieve with traditional impedance-based fault location, which conversely introduces measurement errors equivalent to a few percentage points of the full line length. The MHz sampling rate of the Reason unit, and intelligent processing allow dedicated high speed algorithms to be implemented which accurately monitor the propagation of the disturbance along the monitored circuit, securing the high accuracy result The highly reliable fault location system uses an innovative and patented combination of travelling wave and fault detection algorithms. All the triggers normally associated with Digital Fault Recorders (DFRs) can also be used as an external trigger to record the travelling wave associated with the event. Travelling wave fault location: Summary view The Master station software permits users to display the fault location on a Google-earth map, onto which the GPS coordinates of substations, towers and conductors have been plotted. Maintenance crews are thus directed to the exact location of the fault, without the need to resort to vehicular, helicopter or footpatrols to find the exact location. Alstom is the leader in the field of travelling-wave fault location, as our techniques work equally-well for short-circuits and high impedance faults. The latter will typically confuse other vendor s TWFL solutions as they rely on a change of state to trigger and will be unable to declare a calculation result, or will declare an inaccurate distance. The technique does not rely on a trigger, but correlates the trip command with the continuous disturbance record data, such that a correct result will be obtained. The TWFL can be compensated for the effects of conductor sag with varying ambient temperature and load current heating effects. This trigger is generated after some preset limits are exceeded for magnitude, angle, frequency deviation, positive sequence, negative sequence, imbalance, harmonic distortion, and power. It is possible to monitor up to 4 circuits with each RPV by using the RA333 Remote Acquisition Units. Precision is not affected by line resistance, mutual coupling effects (parallel lines), load, or compensation circuits (capacitor banks). To monitor a transmission line, RPV systems are installed at each end of the line. The travelling wave records are captured in both units and are automatically transmitted to the Master station for the fault location to be calculated. Travelling wave fault location: Map view Precision fault location to direct maintenance crews

10 RPV Software Tools The RPV is supplied with a suite of PC software tools to manage the product and the records produced. The Scanner searches for and uploads the record files from the connected RPV units in a single or multiple substations and stores them in an organised way for later analysis. The scan for new records is run periodically at an adjustable time period. The configuration tool is a version of the web based graphical tool which can be used offline to generate the product configuration required which can then be downloaded to multiple RPV products. The TW Fault Locator is a tool that uses the records of the traveling wave front signal from the RPV units at both ends of a transmission line to locate a fault on the line. The software can output the fault location in a format which allows mapping systems such as Google Earth to display the location. RPV Manager The RPV manager software allows the management of a system of multiple RPV units installed in multiple substations. It manages the communication links and reports their status and periodically scans the network for record files not previously uploaded. The software can also receive record files automatically sent by the RPV units if enabled or as required for TW fault location. The software can also be used to backup and upload the configuration files for all RPV units in the system. Analise The powerful analise package can merge multiple waveform files from different devices, time align them, and display as a single record for side-by-side signal analysis. This greatly assists in post-fault or post-disturbance analysis, where the types of IED and the availability of timesynchronising between substations may vary. In addition, impedance based fault location and harmonic analysis calculations can be performed. The graphical analysis can be output in various picture formats and the related data can be exported in a form readable by Microsoft Excel. Analise CAPTION_WHITE_lore_ipsum_(Optional) Web monitoring: Vectors

11 MEASUREMENT PRODUCT SOLUTIONS RPV311 Ordering Options Power quality Modbus interface GOOSE message detection Phasor measurement unit (PMU) Continuous recorder Trigger disturbance recorder Sequence of events recorder (SOE) Fault recorder IEC LE inputs Travelling wave fault location (TWFL) History of recorders Alstom's Reason recorders have a long history being originally designed in 1996 and having been continuously developed since. Features have been added in response to market requirements as the need for more detailed monitoring of power systems has increased. RPV311 Rear view The latest generation of the Reason RPV311 has been developed to meet current and future recording requirements and for installation in the latest types of monitoring schemes. With support for IEC , IEC LE and synchrophasors (IEEE C37.118) the RPV311 is suited to Smart Grid and Digital substation applications and wide area monitoring. RA332 Rear view CAPTION_WHITE_lore_ipsum_(Optional)

12 MEASUREMENT PRODUCT SOLUTIONS RPV311 Dimensions The RPV311 central unit is presented as a 19" rack (80TE) width, 3U height standard device. The RA33x acquisition units are presented in a compact-depth case, such that mounting in panels or kiosks with constrained depth is made simple. Mounting plates (5U) are available for mounting the RA33x in a 19" rack (80TE). The dimensions of the RA332 are shown below. Refurbishment projects Solutions are available for using the RPV311 and RA33x to replace certain existing centralised DFR products, with the existing wiring being re-used. GRID/PRSHT/RPV311/EN/1.2014/GBR/1893 ALSTOM All rights reserved. Picture caption Grid-SAS-L3-RPV _01-EN. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited. Alstom contributes to the protection of the environment. This leaflet is printed on environmentally friendly paper. For more information please contact Alstom Grid: Alstom Grid Worldwide Contact Centre Phone: +44 (0) Visit us online:

Mehta Tech, Inc. TRANSCAN IED For Multi-Function, Multi-Speed Recording

Mehta Tech, Inc. TRANSCAN IED For Multi-Function, Multi-Speed Recording Mehta Tech, Inc. TRANSCAN IED For Multi-Function, Multi-Speed Recording Two independent, simultaneously operating recorders in one package Triggering on input quantities and calculated values, such as

More information

DS Agile C264. Grid Solutions. Dual-bay Modular Substation Controller. Multi-function Controller. Automation and Control. Advanced Communication

DS Agile C264. Grid Solutions. Dual-bay Modular Substation Controller. Multi-function Controller. Automation and Control. Advanced Communication GE Grid Solutions DS Agile C264 Dual-bay Modular Substation Controller The DS Agile C264 substation controller is a sophisticated solution supporting multiple applications and functions for substation

More information

Bus Bar Protection Relay B-PRO 4000

Bus Bar Protection Relay B-PRO 4000 Bus Bar Protection Relay B-PRO 4000 Product Overview The IEC 61850 station bus embedded B-PRO 4000 relay provides complete bus and substation differential protection (low impedance) with CT saturation

More information

FITNESS GB s Pilot Multi-Vendor Digital Substation - Architecture and Design Philosophy

FITNESS GB s Pilot Multi-Vendor Digital Substation - Architecture and Design Philosophy FITNESS GB s Pilot Multi-Vendor Digital Substation - Architecture and Design Philosophy C. Patterson *, P. Mohapatra *, C. Fundulea * C. Popescu-Cirstucescu G. Lloyd, P. Newman * SP Energy Networks, UK,

More information

IEEE 1588v2 Time Synchronization in Energy Automation Applications Case Studies from China

IEEE 1588v2 Time Synchronization in Energy Automation Applications Case Studies from China IEEE 1588v2 Time Synchronization in Energy Automation Applications Case Studies from China Real Time Communications Symposium Munich, January 2012 Maciej Goraj maciejgoraj@ruggedcom.com 1 Who is RuggedCom?

More information

TFS 2100 Traveling Wave Fault Location System

TFS 2100 Traveling Wave Fault Location System Traveling Wave Fault Location System The most accurate overhead transmission and distribution line fault locator Accuracy: ±150m typical regardless the line length Unaffected by fault resistance Suitable

More information

Substation Automation Products. Bay control REC670/650 Relion 670 and 650 series

Substation Automation Products. Bay control REC670/650 Relion 670 and 650 series Substation Automation Products Bay control REC670/650 Relion 670 and 650 series For optimized control and reliable operation of your switchyard The REC670 and REC650 Bay control IEDs (Intelligent Electronic

More information

Reason RPV311. Technical Manual. Distributed Multifunction Fault Recorder

Reason RPV311. Technical Manual. Distributed Multifunction Fault Recorder Reason RPV311 Technical Manual Distributed Multifunction Fault Recorder Platform Hardware Version: C Platform Software Version: 12 Publication Reference: RPV311-TM-EN-4 ALSTOM 2014. All rights reserved.

More information

How smart can the grid really be?

How smart can the grid really be? How smart can the grid really be? by Dale Pudney, HVT Power Systems and Luo Wei, NR Electric With the improvement of electronic communications and computing technology, it becomes possible to integrate

More information

Trends in Station Bus and Process Bus Communications Via the Several IEC Protocols. Schweitzer Engineering Laboratories, Inc.

Trends in Station Bus and Process Bus Communications Via the Several IEC Protocols. Schweitzer Engineering Laboratories, Inc. Trends in Station Bus and Process Bus Communications Via the Several IEC 61850 Protocols Schweitzer Engineering Laboratories, Inc. Copyright SEL 2009 Reduce Cost / Complexity of Field Wiring Yard House

More information

Protection, Automation, and Control System. Combine subcycle line protection with complete substation bay control

Protection, Automation, and Control System. Combine subcycle line protection with complete substation bay control Protection, Automation, and Control System Combine subcycle line protection with complete substation bay control Subcycle distance protection minimizes damage and expensive repairs on transmission lines.

More information

IDM DATA ACQUISITION SYSTEM

IDM DATA ACQUISITION SYSTEM DATA ACQUISITION SYSTEM The a compact and economical multifunction data acquisition system Rendering all Unrivalled product profile Advanced multifunctional distributed data acquisition system Fully multitasking

More information

THE INTEGRATED TESTING SOLUTION

THE INTEGRATED TESTING SOLUTION Test & Data Management Software TDMS protective relays energy meters transducers power quality CT-VT-PT transformers ground grid circuit breakers batteries surge arresters THE INTEGRATED TESTING SOLUTION

More information

Deploying Digital Substations: Experience with a Digital Substation Pilot in North America. Harsh Vardhan, R Ramlachan GE Grid Solutions, USA

Deploying Digital Substations: Experience with a Digital Substation Pilot in North America. Harsh Vardhan, R Ramlachan GE Grid Solutions, USA Deploying Digital Substations: Experience with a Digital Substation Pilot in North America Harsh Vardhan, R Ramlachan GE Grid Solutions, USA Wojciech Szela, Edward Gdowik PECO, USA SUMMARY Though IEC 61850

More information

Advanced Line Differential Protection, Automation, and Control System. Combine subcycle line protection with traveling-wave fault locating

Advanced Line Differential Protection, Automation, and Control System. Combine subcycle line protection with traveling-wave fault locating Advanced Line Differential Protection, Automation, and Control System Combine subcycle line protection with traveling-wave fault locating Subcycle differential and distance protection minimizes damage

More information

MMLG 01, 02, 03, 04 MMLB01

MMLG 01, 02, 03, 04 MMLB01 MMLG 01, 02, 03, 04 MMLB01 Technical Data Test Blocks and Test Plugs Publication Reference: MMLG_MMLB/EN/TD/B - ALSTOM 2015. All rights reserved. Information contained in this document is indicative only.

More information

Digital Substation Overview of Technology, Industry

Digital Substation Overview of Technology, Industry Digital Substation Overview of Technology, Industry Trends and Standardization Efforts 4th International Scientific & Technical Conference Actual Trends in Development of Power System Protection and Automation

More information

MiCOM Alstom P14N, P14D, P94V

MiCOM Alstom P14N, P14D, P94V MiCOM Alstom P14N, P14D, P94V The P14N non-directional feeder, P14D directional feeder and P94V voltage & frequency IEDs bring the design rigour and technology of transmission applications to the entire

More information

Substation Automation Products. Transformer protection RET670/650 Relion 670 and 650 series

Substation Automation Products. Transformer protection RET670/650 Relion 670 and 650 series Substation Automation Products Transformer protection RET670/650 Relion 670 and 650 series For reliable protection and control of all types of power transformers and reactors The RET670/650 IEDs (Intelligent

More information

SEL Real-Time Automation Controller (RTAC)

SEL Real-Time Automation Controller (RTAC) SEL Real-Time Automation Controller (RTAC) Product Family Rugged, deterministic, and reliable automation controllers for any environment 1 ms deterministic processing intervals support critical protection

More information

MiCOM Agile P746. Grid Solutions. Key Benefits. Numerical Busbar Protection. A Combination of Speed, Security and Selectivity. About MiCOM P40 Agile

MiCOM Agile P746. Grid Solutions. Key Benefits. Numerical Busbar Protection. A Combination of Speed, Security and Selectivity. About MiCOM P40 Agile GE Grid Solutions MiCOM Agile P746 Numerical Busbar Protection The MiCOM Agile P746 centralized numerical busbar protection provides complete protection for all voltage levels up to extra voltage busbar

More information

Substations go fully digital but stay compatible

Substations go fully digital but stay compatible Substations go fully digital but stay compatible The fully digital substation replaces the kilometres of copper hardwiring and proprietary devices of conventional installations with a software-based solution

More information

TWFL - Travelling Wave Fault Location System

TWFL - Travelling Wave Fault Location System XC-2100E TWFL - Travelling Wave Fault Location System SCOPE is dedicated to the innovative use of electronics for Test & Measuring applications since 1988 for the Power Industry. Our approach of seeking

More information

Substation Automation Products. Line differential protection RED670 Relion 670 series

Substation Automation Products. Line differential protection RED670 Relion 670 series Substation Automation Products Line differential protection RED670 Relion 670 series For maximum reliability of your power system The RED670 IED (Intelligent Electronic Device) is designed for protection,

More information

Multilin P30 Phasor Data Concentrator

Multilin P30 Phasor Data Concentrator Multilin P30 Phasor Data Concentrator Secure high performance Phasor Data Concentrator (PDC) for wide area monitoring and dynamic disturbance analysis KEY BENEFITS Reduce deployment and operation cost

More information

Substation Automation Products. Line distance protection REL670/650 Relion 670 and 650 series

Substation Automation Products. Line distance protection REL670/650 Relion 670 and 650 series Substation Automation Products Line distance protection REL670/650 Relion 670 and 650 series For maximum reliability of your power system REL670 and REL650 line distance protection IEDs (Intelligent Electronic

More information

AGILE DIGITAL SUBSTATIONS 2.0 RELEASING THE POTENTIAL OF DIGITAL TECHNOLOGIES

AGILE DIGITAL SUBSTATIONS 2.0 RELEASING THE POTENTIAL OF DIGITAL TECHNOLOGIES AGILE DIGITAL SUBSTATIONS 2.0 RELEASING THE POTENTIAL OF DIGITAL TECHNOLOGIES ALSTOM Grid Worldwide Contact Centre www.alstom.com/grid/contact centre Tel: +44 (0) 1785 250 070 www.alstom.com Michel Augonnet

More information

Automation System Solutions

Automation System Solutions Automation System Solutions Automation Systems for Power Grid, Power Plant and Industries NR Electric Corporation Automation for Power Grid Substation Automation System Conventional Substation Automation

More information

Power System Monitoring Recorder

Power System Monitoring Recorder Power System Monitoring Recorder TESLA 4000 Model 4000 Model 4003 Product Overview TESLA 4000 is an easy-to-use and cost effective, state of the art, multi-time frame (simultaneous) power system monitoring

More information

Relion 615 series Line Differential Protection and Control RED615 Ver. 2.0 Technical Presentation

Relion 615 series Line Differential Protection and Control RED615 Ver. 2.0 Technical Presentation Relion 615 series Line Differential Protection and Control RED615 Ver. 2.0 Technical Presentation ABB Oy Distribution Automation July 1, 2009 1MRS756504 B Slide 1 Contents RED615 Technical Presentation

More information

Session Five: IEC61850 Based Process Bus Protection Solution for Remote Located Power Transformers

Session Five: IEC61850 Based Process Bus Protection Solution for Remote Located Power Transformers Session Five: IEC61850 Based Process Bus Protection Solution for Remote Located Power 1. Abstract Dinesh Mithanthaya Design Manager, Horizon Power Higher capacity substation power transformers ( 5MVA),are

More information

SM100. On-Line Switchgear Condition Monitoring

SM100. On-Line Switchgear Condition Monitoring On-Line Switchgear Condition Monitoring On-Line Switchgear Condition Monitoring Introduction Weis is a specialist company with over 40 years of experience in the commissioning, testing & maintenance of

More information

SPECIAL REPORT FOR STUDY COMMITTEE B5 (Protection and Automation)

SPECIAL REPORT FOR STUDY COMMITTEE B5 (Protection and Automation) 200 Study Committee B5 Colloquium August 25-31, 2013 Belo Horizonte, Brazil SPECIAL REPORT FOR STUDY COMMITTEE B5 (Protection and Automation) PS2: Experience & Application of Non-Conventional Instrument

More information

Power System Monitoring Recorder. Product Overview. 10 Year WARRANTY

Power System Monitoring Recorder. Product Overview. 10 Year WARRANTY Power System Monitoring TESLA 4000 Product Overview TESLA 4000 is an easy-to-use, state of the art, multi-time frame (simultaneous) power system monitoring recorder. Its integrated Phasor Measurement Unit

More information

Products Portfolio. Pole mounted Vacuum Recloser

Products Portfolio. Pole mounted Vacuum Recloser Products Portfolio Pole mounted Vacuum Recloser Efacec Switchgear Efacec Switchgear is a leading company in Portugal and a worldwide reference in the development of solutions for power generation, transmission,

More information

REL52002 Easergy P3U30, 4L, 4U, 16DI/8DO, Uaux: V, DI: V, RS-485

REL52002 Easergy P3U30, 4L, 4U, 16DI/8DO, Uaux: V, DI: V, RS-485 Characteristics Easergy P3U30, 4L, 4U, 16DI/8DO, Uaux: 48-230V, DI: 220-230V, RS-485 Main Range of product Product or component type Relay application Device short name [Us] rated supply voltage Type of

More information

FLEXIBLE SOLUTIONS FOR THE ENERGY INDUSTRY

FLEXIBLE SOLUTIONS FOR THE ENERGY INDUSTRY FLEXIBLE SOLUTIONS FOR THE ENERGY INDUSTRY COMPREHENSIVE INSTRUMENT FOR MEASUREMENT AND CONTROL OF POWER SYSTEMS CENTRAX CU-SERIES CENTRAX CU3000 CENTRAX CU5000 PAGE 2 Comprehensive instrument for measurement

More information

REL52001 Easergy P3U30, 4L, 4U, 16DI/8DO, Uaux: V, DI: V, 2 x RJ-45

REL52001 Easergy P3U30, 4L, 4U, 16DI/8DO, Uaux: V, DI: V, 2 x RJ-45 Characteristics Easergy P3U30, 4L, 4U, 16DI/8DO, Uaux: 48-230V, DI: 220-230V, 2 x RJ-45 Main Range of product Product or component type Relay application Configuration type (Cortec) [Us] rated supply voltage

More information

DGSZV-EP DIGITAL GALVANIC LONGITUDINAL DIFFERENTIAL PROTECTION. Application field

DGSZV-EP DIGITAL GALVANIC LONGITUDINAL DIFFERENTIAL PROTECTION. Application field DGSZV-EP DIGITAL GALVANIC LONGITUDINAL DIFFERENTIAL PROTECTION The digital galvanic longitudinal differential protection of type DGSZV-EP is part of device family named EuroProt. This short description

More information

Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection

Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential

More information

NEO 3000 Substation System THE FAMILY OF EQUIPMENT DEDICATED FOR POWER UTILITIES. Energy Sector

NEO 3000 Substation System THE FAMILY OF EQUIPMENT DEDICATED FOR POWER UTILITIES. Energy Sector THE FAMILY OF EQUIPMENT DEDICATED FOR POWER UTILITIES Introduction The supply of electrical energy occupies an important position in the life of modern society. Operation of commerce, industry, transport,

More information

Lecture 5 Substation Automation Systems. Course map

Lecture 5 Substation Automation Systems. Course map Lecture 5 Substation Automation Systems 1 Course map 2 1 Contents of the Lecture Part 1 Substation Automation Components Substation Automation Functions Communication within the Substation (Intro) Part

More information

Power System Monitoring Recorder TESLA 3000

Power System Monitoring Recorder TESLA 3000 Power System Monitoring Recorder TESLA 3000 Product Overview TESLA 3000 is an easy-to-use and cost-effective, stateof-the-art, multi-time frame (simultaneous) power system recording monitor. The optional

More information

NERC PRC-002 Recording Solutions

NERC PRC-002 Recording Solutions NERC PRC-002 Recording Solutions Reliable, flexible, modular disturbance recording Create advanced recording solutions for your system with the SEL-2240 and Real-Time Automation Controller (RTAC). Capture

More information

SEL Time-Domain Link (TiDL ) Technology

SEL Time-Domain Link (TiDL ) Technology SEL Time-Domain Link (TiDL ) Technology The simple, fast, and secure digital secondary system solution Increase safety by removing high-energy cables from areas where personnel typically work. Reduce the

More information

Substation Automation Products. High impedance differential busbar protection REB650 Relion 650 series

Substation Automation Products. High impedance differential busbar protection REB650 Relion 650 series Substation Automation Products High impedance differential busbar protection REB650 Relion 650 series One IED for a wide range of high impedance differential protection applications ABB introduces a new,

More information

SEL-487B. A Powerful Solution for Busbar Differential Protection. Bus Differential and Breaker Failure Relay

SEL-487B. A Powerful Solution for Busbar Differential Protection. Bus Differential and Breaker Failure Relay Bus Differential and Breaker Failure Relay A Powerful Solution for Busbar Differential Protection Features and Benefits Select the for the differential protection of busbar systems with up to 18 terminals.

More information

ISIO 200. Binary Input/Output (I/O) terminal with IEC interface

ISIO 200. Binary Input/Output (I/O) terminal with IEC interface ISIO 200 Binary Input/Output (I/O) terminal with IEC 61850 interface Compact and easy ISIO 200 Put your Binary I/Os where you need them ISIO 200 is a simple and versatile binary I/O terminal with IEC 61850

More information

Digital Substation Unrestricted Siemens AG 2017 siemens.com/digital-substation

Digital Substation Unrestricted Siemens AG 2017 siemens.com/digital-substation Digital Substation A Substation Why Should We Make It Digital? Adopt new business models Time to operation Quality assurance Business agility Avoid outages Investment security Ensuring grid availability

More information

Chapter 2 State Estimation and Visualization

Chapter 2 State Estimation and Visualization Chapter 2 State Estimation and Visualization One obvious application of GPS-synchronized measurements is the dynamic monitoring of the operating conditions of the system or the dynamic state estimation

More information

Control and Protection System Win-TDC

Control and Protection System Win-TDC HVDC Control & Protection Control and Protection System Win-TDC HVDC Aysen -SIC Basics of HVDC Basic Design Equipment Info Control & Protection Station Design Logistics Project Management Maintenance 1

More information

TFS-2100E Travelling Wave Fault Locator System Description and Specification

TFS-2100E Travelling Wave Fault Locator System Description and Specification Istrumentazioni Sistemi Automatici S.r.l. VIA PRATI BASSI 22-21020 TAINO (VA) - ITALY OFFICES TEL. +39.0331.956081 - FAX +39.0331.957091 E-MAIL isa@isatest.com WEB www.isatest.com DATE: 02/11/2016 DOC.SIE40171

More information

The PowerLogic range. Gain energy insight and control

The PowerLogic range. Gain energy insight and control The PowerLogic range Gain energy insight and control The PowerLogic advantage PowerLogic is the world's largest and most advanced range of software and metering products for managing energy, giving suppliers

More information

Relion 615 series Transformer Protection and Control RET615 Ver. 2.0 Technical Presentation

Relion 615 series Transformer Protection and Control RET615 Ver. 2.0 Technical Presentation Relion 615 series Transformer Protection and Control RET615 Ver. 2.0 Technical Presentation Distribution Automation May 13, 2010 1MRS756901 A Slide 1 Content RET615 Technical Presentation highlights May

More information

Products for increased power system availability

Products for increased power system availability Products for increased power system availability P R O D U C T G U I D E Fault detectors and protective relays Protrol s products are designed for reliable and cost-effective performance monitoring and

More information

PowerFactory Monitor PFM300

PowerFactory Monitor PFM300 DIgSILENT PowerFactory Monitor PFM300 INTEGRATED, MULTIFUNCTIONAL DATA ACQUISITION SYSTEM FAULT RECORDER / DYNAMIC SYSTEM MONITOR / POWER QUALITY / GRID COMPLIANCE / PHASOR MEASUREMENT UNITS / POWER PLANT

More information

SIPROTEC 5 Application Note. Breaker-and-a-half solutions. SIP5-APN-002, Edition 2.

SIPROTEC 5 Application Note. Breaker-and-a-half solutions. SIP5-APN-002, Edition 2. -and-a-half solutions SIP5-APN-002, Edition 2 www.siemens.com/protection SIPROTEC 5 Application Note -and-a half solutions SIP5-APN-002, Edition 2 -and-a-half solution Content 1 -and-a-half solutions 3

More information

COMMUNICATION NETWORKS. FOX615/612 TEGO1 IEC GOOSE Proxy Gateway interface module.

COMMUNICATION NETWORKS. FOX615/612 TEGO1 IEC GOOSE Proxy Gateway interface module. COMMUNICATION NETWORKS FOX615/612 TEGO1 IEC 61850 GOOSE Proxy Gateway interface module. 2 FOX615/612 TEGO1 IEC 61850 GOOSE GATEWAY INTERFACE MODULE INTRODUCTION 3 FOX615/612 multiplexing platform. Enabling

More information

Substation Automation Products. Generator protection REG670/650 Relion 670 and 650 series

Substation Automation Products. Generator protection REG670/650 Relion 670 and 650 series Substation Automation Products Generator protection REG670/650 Relion 670 and 650 series A new protection standard for your valuable assets Based on ABB s extensive experience, REG670 and REG650 IEDs (Intelligent

More information

Electrical Integration with Smart Communication

Electrical Integration with Smart Communication Electrical Integration with Smart Communication New possibilities with Industrial Ethernet ABB Group September 24, 2009 Slide 1 Unified Integration Approach MES and Business Systems Knowledge Portals as

More information

MiCOM P721 & P723. Numerical High Impedance Differential Relay. Protection Relays. Customer Benefits

MiCOM P721 & P723. Numerical High Impedance Differential Relay. Protection Relays. Customer Benefits 01 MiCOM P721 & P723 Numerical High Impedance Differential Relay The new P72x high impedance differential protection series provides an independent and simple high impedance differential protection solution

More information

Protection, Automation, and Bay Control System. Advanced feeder protection and complete substation bay control in one economical system

Protection, Automation, and Bay Control System. Advanced feeder protection and complete substation bay control in one economical system SEL-451 Protection, Automation, and Bay Control System Advanced feeder protection and complete substation bay control in one economical system Customize distribution protection using multiple instantaneous,

More information

Real-time visualization for detecting and solving power system challenges

Real-time visualization for detecting and solving power system challenges SEL-5078-2 synchrowave Central Software Real-time visualization for detecting and solving power system challenges Automatically detect transients induced by renewable generation. Gain power system insight

More information

Non-conventional instrument transformers Advanced GIS substations with IEC LE process bus

Non-conventional instrument transformers Advanced GIS substations with IEC LE process bus Non-conventional instrument transformers Advanced GIS substations with IEC 61850-9-2LE process bus Content Towards the digital GIS substations Optimized substation design NCIT for gas-insulated switchgears

More information

extending the boundaries of technology evolution of proven technology FEATURES

extending the boundaries of technology evolution of proven technology FEATURES extending the boundaries of technology evolution of proven technology FEATURES IEC 61850 compliant Advanced AC capabilities with comprehensive fault detection Integrated protection functions Disturbance

More information

FEEDBACK ON INSTALLED EXPERIENCE WITH FULLY-DIGITAL SUBSTATIONS

FEEDBACK ON INSTALLED EXPERIENCE WITH FULLY-DIGITAL SUBSTATIONS FEEDBACK ON INSTALLED EXPERIENCE WITH FULLY-DIGITAL SUBSTATIONS Simon RICHARDS Abraham VARGHESE Andreas PROCOPIOU Alstom Grid - UK Alstom Grid - UK Alstom Grid - France simon.richards@alstom.com abraham.varghese@alstom.com

More information

Transformer Protection Relay

Transformer Protection Relay Transformer Protection Relay T-PRO Product Overview The IEC 61850 station bus embedded T-PRO relay provides complete three-phase multi-winding transformer protection and overload protection, DFR-quality

More information

Jim McGhee, Utility Market Manager, RuggedCom Inc.

Jim McGhee, Utility Market Manager, RuggedCom Inc. First Practical Experience with IEEE 1588 High Precision Time Synchronization in High Voltage Substation with IEC 61850 Process Bus Jim McGhee, Utility Market Manager, RuggedCom Inc. (JimMcGhee@RuggedCom.com)

More information

SIPROTEC 5 V7.8 Protection, automation and monitoring for digital substations

SIPROTEC 5 V7.8 Protection, automation and monitoring for digital substations SIPROTEC 5 V7.8 Protection, automation and monitoring for digital substations siemens.com/siprotec5 SIPROTEC 5 Table of content Introduction New functions of V7.8 SIPROTEC 5 - the core of Digital Substation

More information

Lecture 6 Substation Automation Systems

Lecture 6 Substation Automation Systems Lecture 6 Substation Automation Systems 1 Course map 2 Contents of the Lecture Part 1 Substation Automation Components & Architectures Substation Automation Functions Communication within the Substation

More information

SCE WASAS Combined Disturbance Fault Recorder (DFR) and Phasor Measurement Unit (PMU) Specifications. Anthony Johnson

SCE WASAS Combined Disturbance Fault Recorder (DFR) and Phasor Measurement Unit (PMU) Specifications. Anthony Johnson SCE WASAS Combined Disturbance Fault Recorder (DFR) and Phasor Measurement Unit (PMU) Specifications Anthony Johnson Anthony.Johnson@SCE.com Summary Specifications for combined DFR/PMU to be used as part

More information

MiCOM Agile P345 & P348

MiCOM Agile P345 & P348 GE Grid Solutions MiCOM Agile P345 & P348 Generator Protection for Variable Speed, Double Fed Induction Machines Pumped storage is one of the most efficient and flexible forms of storing bulk electrical

More information

Implementing the protection and control of future DC Grids

Implementing the protection and control of future DC Grids Implementing the protection and control of future DC Grids Hengxu Ha, Sankara Subramanian Innovation and Technology Department, SAS, Alstom Grid 1. The challenge of the DC Grid protection 1 High speed

More information

MiCOM P521. Fast Feeder Differential Protection

MiCOM P521. Fast Feeder Differential Protection 01 Fast Feeder Differential Protection The relay provides high-speed two-ended current differential unit protection of overhead lines and underground cables in applications such as ring mains and parallel

More information

MINER-S Station Controller. Substation Automation

MINER-S Station Controller. Substation Automation Substation Automation MINER-S Station Controller incorporates traditional RTU functions with new technology in a compact design MINER-S Station Controller combines the functions of a traditional RTU with

More information

Power Systems Communications Implementation of IEC61850 in a Substation Environment

Power Systems Communications Implementation of IEC61850 in a Substation Environment Power Systems Communications Implementation of IEC61850 in a Substation Environment 26 October 2009 Reference VEE4700-01 Revision 0 Document Control Document ID: DOCUMENT1 Rev No Date Revision Details

More information

A low-cost, economical solution for distribution feeder protection

A low-cost, economical solution for distribution feeder protection SEL-351A Protection System A low-cost, economical solution for distribution feeder protection Achieve sensitive and secure fault detection using comprehensive protection functions. Track breaker status

More information

COLLABORATE TO WIN. 03/31/2017 Digital Substation Turning IEC61850 features into benefits. Peter Rietmann, Program Manager Digital Substation NA

COLLABORATE TO WIN. 03/31/2017 Digital Substation Turning IEC61850 features into benefits. Peter Rietmann, Program Manager Digital Substation NA COLLABORATE TO WIN 03/31/2017 Digital Substation Turning IEC61850 features into benefits Peter Rietmann, Program Manager Digital Substation NA Increasing Reliability Higher functional integration and process

More information

DRTS 33. The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters

DRTS 33. The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual

More information

Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection

Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential

More information

MiCOM P521. Fast feeder differential protection

MiCOM P521. Fast feeder differential protection 01 Fast feeder differential protection The relay provides high-speed two-ended current differential unit protection of overhead lines and underground cables in applications such as ring mains and parallel

More information

Content REF615 Technical Presentation

Content REF615 Technical Presentation Distribution Automation Relion 615 series Feeder Protection and Control Ver. 2.0 Technical Presentation March 30, 2010 1MRS756407 E Slide 1 Content Technical Presentation highlights March 30, 2010 Slide

More information

Relion 615 series Feeder Protection and Control REF615 Ver. 2.0 Technical Presentation

Relion 615 series Feeder Protection and Control REF615 Ver. 2.0 Technical Presentation Relion 615 series Feeder Protection and Control REF615 Ver. 2.0 Technical Presentation Distribution Automation May 13, 2010 1MRS756407 E Slide 1 Content REF615 Technical Presentation highlights May 13,

More information

Experience with a Digital Substation Pilot in North Ame rica

Experience with a Digital Substation Pilot in North Ame rica Experience with a Digital Substation Pilot in North Ame rica Wojciech Szela, Edward Gdowik PECO Harsh Vardhan, R. Ramlachan GE Grid Solutions 2018 Texas A&M Protective Relaying Conference IEC MDS 61850

More information

Designing a new IEC substation architecture

Designing a new IEC substation architecture Designing a new IEC 61850 substation architecture Gerrit Dogger Senior Product and Application Specialist Cooper Power Systems gerrit.dogger@cybectec.com Garry Tennese Station Integration Specialist Manitoba

More information

REALISATION OF AN INTELLIGENT AND CONTINUOUS PROCESS CONNECTION IN SUBSTATIONS

REALISATION OF AN INTELLIGENT AND CONTINUOUS PROCESS CONNECTION IN SUBSTATIONS REALISATION OF AN INTELLIGENT AND CONTINUOUS PROCESS CONNECTION IN SUBSTATIONS Christina SÜFKE Carsten HAVERKAMP Christian WEHLING Westnetz GmbH - Germany Westnetz GmbH - Germany Westnetz GmbH - Germany

More information

DRTS 64. The new generation of advanced test equipment for Relays, Energy meters, Transducers and Power quality meters.

DRTS 64. The new generation of advanced test equipment for Relays, Energy meters, Transducers and Power quality meters. The new generation of advanced test equipment for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual

More information

p. 1 p. 9 p. 26 p. 56 p. 62 p. 68

p. 1 p. 9 p. 26 p. 56 p. 62 p. 68 The Challenges and Opportunities Faced by Utilities using Modern Protection and Control Systems - Paper Unavailable Trends in Protection and Substation Automation Systems and Feed-backs from CIGRE Activities

More information

Sensitive Earth-fault Relay SPAJ 111 C. Product Guide

Sensitive Earth-fault Relay SPAJ 111 C. Product Guide Issued: April 1999 Status: Update Version: C/12.04.2006 Data subject to change without notice Features Sensitive low-set neutral overcurrent stage with definite time characteristic High-set neutral overcurrent

More information

TR-2100 Multi - Function Recorder

TR-2100 Multi - Function Recorder TR-2100 Multi - Function Recorder Operation Manual Document No. 1086-816 Revision A AMETEK Power Instruments Tel: (800) 881-4156 255 N. Union Street Fax: (585) 238-4945 Rochester, New York 14605 Web: www.rochester.com

More information

MiCOM P124 T&D. Self and Dual Powered Overcurrent Relays

MiCOM P124 T&D. Self and Dual Powered Overcurrent Relays PROTECTION MiCOM P124 Self and Dual Powered Overcurrent Relays MiCOM P124 are numerical relays designed to offer complete overcurrent protection without requiring any external auxiliary supply. They can

More information

DRTS 33. The new generation of advanced three phase relay test set

DRTS 33. The new generation of advanced three phase relay test set The new generation of advanced three phase relay test set Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Local control with color display Simultaneously available:

More information

MODULYS GP Unique, fully modular and redundant solution Green Power 2.0 range from 25 to 600 kva/kw

MODULYS GP Unique, fully modular and redundant solution Green Power 2.0 range from 25 to 600 kva/kw Unique, fully modular and redundant solution The solution for > Computer rooms > Data centres > Banks > Healthcare facilities > Insurance > Telecom Advantages > Ensures absolute business continuity > Aligns

More information

Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection

Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential

More information

Networks TN, TT, IT networks 3 and 4-phase networks Up to 4 single-phase networks

Networks TN, TT, IT networks 3 and 4-phase networks Up to 4 single-phase networks Memory 256 MB 8 Tariffs Harmonics Pulse inputs and outputs Measurement accuracy 0.5 UMG 96RM Multifunction power analyser Communication (device-specific) Modbus (RTU) Profibus DP V0 Profinet TCP/IP M-Bus

More information

THE NEW GENERATION OF ADVANCED TEST EQUIPMENTS FOR RELAYS, ENERGY METERS, TRANSDUCERS AND POWER QUALITY METERS.

THE NEW GENERATION OF ADVANCED TEST EQUIPMENTS FOR RELAYS, ENERGY METERS, TRANSDUCERS AND POWER QUALITY METERS. D R T S 6 6 THE NEW GENERATION OF ADVANCED TEST EQUIPMENTS FOR RELAYS, ENERGY METERS, TRANSDUCERS AND POWER QUALITY METERS. www.isatest.com DRTS 66 The new generation of advanced test equipments for relays,

More information

CMC 256plus. The High Precision Relay Test Set and Universal Calibrator

CMC 256plus. The High Precision Relay Test Set and Universal Calibrator CMC 256plus The High Precision Relay Test Set and Universal Calibrator CMC 256plus High Precision Relay Testing and The CMC 256plus is the first choice for applications requiring very high accuracy. This

More information

ISIO 200. Binary Input/Output (I/O) Terminal with IEC GOOSE Interface

ISIO 200. Binary Input/Output (I/O) Terminal with IEC GOOSE Interface ISIO 200 Binary Input/Output (I/O) Terminal with IEC 61850 GOOSE Interface Compact and Easy ISIO 200 Put your Binary I/Os where you need them ISIO 200 is a simple and versatile binary I/O terminal for

More information

OMICRON CMC 356. The Universal Relay Test Set and Commissioning Tool

OMICRON CMC 356. The Universal Relay Test Set and Commissioning Tool OMICRON CMC 356 The Universal Relay Test Set and Commissioning Tool CMC 356 Universal Relay Testing and The CMC 356 is the universal solution for testing all generations and types of protection relays.

More information

Amsterdam 27 September 2017 David MacDonald

Amsterdam 27 September 2017 David MacDonald Operations & Maintenance facilitating condition based and predictive maintenance to support cost-efficient operation and maximum life-cycle of next generation IEC 61850 systems Amsterdam 27 September 2017

More information