SNAP, CLICK, DONE. Getting Started Guide
|
|
- Jasmine Shaw
- 6 years ago
- Views:
Transcription
1 SNAP, CLICK, DONE. Getting Started Guide
2 Introducing Sateon Advance Sateon Advance offers a flexible new approach to access control, with a new range of hardware and software products. The hardware is based on a modular architecture: two variants of intelligent controller can be combined with snap-in blades for either door control or peripheral support. Sateon Server Advance 2 Door Blade You can snap the Door Blade into place on either type of Advance controller to manage doors. Each door blade enables the connection of two doors and two readers plus a range of door elements such as locks and exit buttons. See page 10 for connection details. Advance Single-Blade Controller The compact Single-Blade Controller is ideal when you only have a small space available. The device supports either one door blade or one I/O blade, and it can be powered via PoE or a separate external power supply. For details, see page 6. Page 2
3 Sateon Client + Quick Start Application Sateon Quick Start Application Installing and configuring a Sateon system is straightforward with the Quick Start application, which will discover your controllers and configure your doors and readers quickly and easily. See page 15 for details of Quick Start. Advance Multi-Blade Controller The Multi-Blade Controller is particularly suited to larger systems and is designed to make the most of your space. Each controller can support up to four blades, enabling connection of up to 8 readers/ doors or a combination of doors and I/O. For details, see page 8. Advance I/O Blade The I/O Blade can be used when you need to connect additional peripherals. It enables the connection of up to 8 volt-free relay outputs and 8 supervised inputs. The blade can be used in either single-blade or multi-blade controllers. See page 12 for connection details. Page 3
4 Network Configuration IP ONLY NETWORK IP Switch IP RS485 ONLY NETWORK IP Switch Controller (485 relay mode enabled) RS485 HYBRID - IP AND RS485 NETWORK Switch Controller (485 relay mode enabled) IP RS485 Page 4
5 Power Options PoE POWER Single-Blade Controller with Lithium-Polymer Battery PoE+ switch / injector Mains Power CAT5e or above (100m max) Readers, locks and other connected I/O devices LOCAL POWER Multi-Blade Controller with PSU and Enclosure Mains Power PSU Battery Readers, locks and other connected I/O devices Page 5
6 Setting up a Single-Blade Controller The Advance Single-Blade Controller is designed to be located close to a door or when limited space is available. It has an integral case which supports either one 2 Door Blade (supporting 2 doors and 2 readers) or one I/O Blade (supporting up to 8 supervised inputs and 8 volt-free relay outputs). The Single-Blade Controller can be used with different power options: PoE, PoE+ or one of a number of supported 12V external power supplies. In addition, an optional 4.2V lithium polymer battery can provide backup for all connected equipment during power outages. When selecting the most suitable power supply, calculate: The total power consumption of the controller itself, its components and the blade fitted. This will include: Controller quiescent power 3.0W, max 250mA Battery charging power up to 2.0W, max 167mA (when battery depleted) Door blade, if fitted 1.0W I/O blade, if fitted 4.0W The total power requirements for all the locks, readers, etc. that will be connected to the blade. Power supply Supplied Used by controller* Remaining for devices PoE (IEEE af ) 11W 0.92A 6.0W 0.5A 5W 417mA PoE+ (IEEE at) 21W 1.75A 6.0W 0.5A 15W 1250mA 12V external power supply (5A) 60.0W 5.0A 6.0W 0.5A 54.0W 4500mA * Indicates the approximate power required by the controller with one door blade fitted and allowing for standard battery charging power. Page 6
7 1 Run cabling from the doors, locks, inputs and outputs. The case includes breakouts to permit cable entry and a void behind the case offers plenty of space for cabling. Reset! 1 Status 2 Snap the blade into the controller. Ensure the blade is inserted before any power source is connected. 4 For Door Blade connections, see page 8. For I/O Blade connections, see page 10. MAC ADDRESS 0001CE20001 SAT-ADV-C-MLT ! 3 Attach the case to the wall in the desired location. Load/Clear Optical Tamper The optical tamper will operate as soon as the case is closed RS-485 A B S 12V 5A MAX Install the lithium polymer back-up battery if required. The battery ensures operation of equipment during power outage. Note that data is retained even without a battery fitted. 3 5 Connect the IP and/or RS485 cable as required. See page 18 for details. If using PoE, IP connection will apply power to the controller. Once power is applied to the controller it will be visible to the Sateon Quick Start application. 6 Connect a suitable 12V external power supply, if used. Need more information? gtl.biz/csng Page 7
8 Setting up a Multi-Blade Controller The Advance Multi-Blade Controller is ideal for installing in a centralised location, such as a riser cupboard or server room. Each controller can support up to four blades, enabling the connection of up to 8 doors / 8 readers, if four door blades are fitted. Alternatively, a combination of door and I/O blades can be used. The Multi-Blade Controller can be used with different power supplies: 5 Amp external power, 8 Amp external power, PoE or PoE+. In addition, an optional 12V sealed lead acid battery can provide backup for all connected equipment during power outages. (Note that all data is retained when power is lost even without a battery fitted). When selecting the most suitable power supply, calculate: The total power consumption of the controller itself, its components and fitted blades. This will include: Controller quiescent power 3.6W, max 300mA Battery charging power depends on the power supply used, e.g. for 12V 5A PSU, assume max 6.0W (0.5A) Each door blade fitted 1.0W Each I/O blade fitted 4.0W The total power requirements for all the locks, readers, etc. that will be connected to all the blades: Power supply Supplied Used by controller* Remaining for devices PoE (IEEE af ) 11W 0.9A 16.6W 1.4A ** ** PoE+ (IEEE at) 21W 1.75A 16.6W 1.4A 4.4W 366mA 12V 5A External power supply 12V 8A External power supply 60.0W 5.0A 16.6W 1.4A 43.4W 3616mA 96.0W 8.0A 16.6W 1.4A 79.4W 6616mA * Indicates the approximate power required by the controller, assuming three Door Blades and one I/O Blade fitted, and allowing for standard battery charging power. ** PoE is not recommended for fully-populated multi-blade controllers as it does not provide sufficient power. Page 8
9 1 Run cabling to the enclosure from all 2 the doors, readers, locks, inputs and outputs that are to be connected. The controller can be installed in a Grosvenor enclosure or a thirdparty enclosure. Attach the enclosure to the wall using the fixing points. Install the controller in the enclosure. Connect the physical tamper. The built-in optical tamper operates automatically when the enclosure is closed. 3 Snap in blades. Ensure all required blades are inserted before power is applied. For Door Blade connections, see page 8. For I/O Blade connections, see page MP 0V 12V 8A MAX 12V 5A MAX Optical Tamper MAC ADDRESS 0001CE20001 SAT-ADV-C-MLT Status! Rev 4 Tamper ! Load/Clear Reset 4 Connect a 12V leadacid back-up battery if required. 5 RS-485 A B S 5 Connect the IP and/or RS485 cable as required. See page 18 for details. If using PoE, IP connection will apply power to the controller. 6 Connect 12V external power supply, if used. Select the most appropriate option: either 5A (2.1mm circular jack) or 8A (4-pin screw terminal). Need more information? gtl.biz/cmlt Once power is applied to the controller it will be visible to the Sateon Quick Start application. Page 9
10 Setting up a 2 Door Blade Door/ Reader 1 Door/ Reader 2 I/O 1 I/O 2 External power sateon 2 DOOR BLADE IN +12 V +5 V RS485 A RS485 B Clock/D1 Data/D0 Valid Beeper Tamper +12 V Sounder REX Sensor Lock + BGU +12 V +5 V RS485 A RS485 B Clock/D1 Data/D0 Valid Beeper Tamper +12 V Sounder REX Sensor Lock + BGU Aux In + Out ± Return ± Aux In + Out ± Return ± 0V V In + Reader Connections Sateon Reader connections +12 V +5 V RS485 A RS485 B Clock/D1 Data/D0 Valid Beeper Tamper HID Reader connections +12 V +5 V RS485 A RS485 B Clock/D1 Data/D0 Valid Beeper Tamper Door Connections Contact Only (no fault detection) +12 V Sounder REX Sensor + Sounder Exit switch Door sensor Wiegand keypads can be supported using the same wiring. The Door Sensor circuit may also be configured with 1K line resistors for fault detection. Page 10
11 Lock Connections Fail Secure Lock A Fail Secure lock requires power to release the lock. The door would remain locked in the case of a power failure. Lock + BGU Fit mechanical override for emergency release + Lock Fail Safe Lock with Break Glass A Fail Safe lock requires power to lock the door. The door would be unlocked in the case of a power failure. Lock + BGU Break Glass 2- Pole Changeover Normal Broken Normal Broken + Lock External Power Supply IN 0V V In + External Lock Power Supply V dc + By default, locks use the internal power supply. If required, the door blade external power supply can be used. Visit gtl.biz/bl2d for details. Input/Output Connections Aux In + Out ± Return ± Input switch The inputs can be supervised and may optionally be used with line resistors for fault or tamper detection. The output connections are volt free opto-isolated outputs. Max rating = 30V DC and 300mA Need more information? gtl.biz/bl2d Page 11
12 Setting up an I/O Blade Inputs 1-8 Outputs 1-8 External power sateon I/O BLADE OUT In + In + In + In + In + In + In + In + Out NC Com Out NO Out NC Com Out NO Out NC Com Out NO Out NC Com Out NO Out NC Com Out NO Out NC Com Out NO Out NC Com Out NO Out NC Com Out NO 0V +12V The I/O Blade can be used with either the Single- Blade Controller or the Multi-Blade Controller to support extra peripherals. Input Connections In + Supervised, may optionally be used with line resistors for fault or tamper detection. In + Output Connections Out NC Com Out NO 1K 1K Normally Closed Contact Common Input switch Normally Open Need more information? gtl.biz/bld Input switch The output relays offer volt free contacts and may be used to connect to low voltage systems such as barriers or turnstiles, provided the voltage across the contacts does not exceed 30V and current does not exceed 3A. Page 12
13 Setting up the Sateon Mini PC If you are using the Sateon Mini PC, it comes with Sateon already installed and ready to use. Starting up the SATEON Mini PC 1. Plug in a monitor (minimum screen resolution 1200 x 800) using an HDMI cable. 2. Plug in a USB keyboard and mouse. 3. Connect a network cable. 3. Connect the power supply and press the Mini PC power button. 4. Once the Mini PC has started up, log on to it as follows: Username: Administrator Password: sateon-0 To access Sateon from another workstation From any other computer on the network, open Internet Explorer and enter: where hostname is the name of your SATEON Mini PC. The hostname can be found on the label on the underside of the Mini PC. EZBX-SAT Hostname: SATEON0152 Password: sateon-0 Page 13
14 Installing Sateon If you aren t using the Mini PC, you need to install the Sateon software on a suitable desktop PC or server. Log in as an Administrator with full privileges. From the USB flash drive provided, run SateonSetup. On the first dialog, check and agree the licence terms. On the Install menu, click the Express button. Minimum requirements 2 GHz or faster 64-bit 4-core processor, 8 GB RAM and a 64 GB hard drive. (Larger systems may need higher specifications to ensure good performance.) The operating system must be Windows Server 2012 R2, Windows 8.1 or Windows 10 (Professional or Enterprise). Make sure all Service Packs and updates are installed. The Express option will set up everything needed to run Sateon on a single computer, including SQL Server You may need to restart the computer part way through the process. The Sateon installation will continue automatically after the restart. Once the installation is complete, you are ready to run Quick Start. Need more information? gtl.biz/satqg Page 14
15 Running Quick Start The Quick Start application will discover the controllers connected to your network, and help you get Sateon up and running as quickly as possible. Run Quick Start. It is installed in the Sateon/Utilities folder but you can also run it from the supplied USB flash drive. In the Sateon Server box, enter the name of the computer that Sateon is installed on. Click Login. The Sateon Login screen appears. Log in to the Sateon system using an admin username and password. The default admin logon is: Username: admin Password: sateon The first time you log on to Sateon you will be prompted to change your password before continuing. Page 15
16 Discovering Controllers The first time you log in to Sateon, the Select Defaults dialog is displayed. Choose the Reader/Token type used on your site, and click Continue. It is very important that the Reader/ Token type is set correctly, as it cannot be changed later. If you are unsure, contact Grosvenor Technical Support. Quick Start then automatically searches your network for Sateon controllers and displays details as follows: Page 16
17 Quick Start indicates the total number of controllers that have been found on the network, and shows the number of each status. You can search for specific controllers by name. Initially, the controllers are displayed in name order but you can change this using the Sort By option. Each controller discovered will have a status: New The controller has been found but is not yet configured. The first step is to define its network settings so Sateon can connect to it. Online Sateon is already communicating with the controller. If it has door blades connected you can set up the door and reader configuration. Offline The controller exists on the network but is not communicating with Sateon. Unlicensed The controller hardware doesn t match the licence. Contact Grosvenor Technical Support. Each NEW controller is identified by its unique serial number. You can check this against the label on the controller itself: Page 17
18 Configuring Controllers For IP connectivity, configure controllers as follows: 1 Give the controller a name. We suggest using a name that identifies its location or purpose. 2 Choose the connection mode: for IP networks select IP only. The addressing options appear. 3 4 Choose Use DHCP if IP addresses are to be dynamically assigned, or choose Use Static IP Address to assign a static IP address. If you choose Use Static IP Address, complete the IP Address, Subnet and Gateway. If necessary, check the IP settings with the network administrator. Click OK to save the settings. Sateon can now connect to the controller Page 18
19 For RS485 connectivity, configure controllers as follows: 1 Give the controller a name. We suggest using a name that identifies its location or purpose. One controller must be configured as a Relay controller: it acts as a line header and requires an IP connection as well as a RS485 line. All other linked controllers must be configured as 485 only. 2 Choose the connection mode: Relay to define a Relay controller or 485 Only for all other controllers in a RS485 chain. Different addressing options appear. 3 For Relay controllers: define the IP settings and set the baud rate for the RS485 line (defaults to 19200) For 485 Only controllers: choose the managing Relay controller and set the baud rate (defaults to 19200) 4 Page 19
20 Configuring Doors and Readers Once a controller is shown as ONLINE, click the Configure Doors button. On the Configure Doors dialog: 1 Choose the door configuration: Door with one reader Door with reader and an exit switch Door with two readers Choose the hardware connections used: number of blade for multiblade (1-4), door (1 or 2) and reader (1or 2). Give the door a name, such as its location. Click Add Door. The Configure Doors button only appears if this controller has doors that need to be defined. It will not appear if all doors have been set up, or if only I/O blades are connected Page 20
21 Starting up Sateon Once you have set up the basic hardware, you can log into the main Sateon user interface to set up the rest of the data you need, including personnel, tokens and access permissions. From any computer on the network, open Internet Explorer and enter: where hostname is the computer Sateon is installed on. If you are using Windows 10, the default browser is Microsoft Edge, which is not compatible with Sateon. Use the Search option to locate Internet Explorer. Sateon uses Microsoft Silverlight technology, which requires a browser plug-in. You will be prompted to install this on first use. Log in to Sateon Advance using an admin username and password. Page 21
22 Next Steps Set up personnel Choose Personnel at the top of the page. Click the to add new details. Enter details of the person and click Save. Assign a token and define access Choose the person and click the Access tab. To set up a new token, click Create and Assign. You can scan the token at any reader to add it to the system. To define the person s permitted access, click Add Access. Choose a defined door/ reader from the Where drop-down. Choose a time from the When drop-down. Need more information? gtl.biz/satsw Page 22
23 Further information Product Information Single-Blade Controller Multi-Blade Controller Door Blade I/O Blade Installing Sateon Software Documentation Power Accessories URL gtl.biz/scng gtl.biz/cmlt gtl.biz/bl2d gtl.biz/bld gtl.biz/satqg gtl.biz/satsw gtl.biz/pwr gtl.biz/acc You re ready to go! Sign me up For the latest news, advice and information, head to gtl.biz/signup Page 23
24 Grosvenor Technology Ltd. 2nd Floor Endeavour House, Coopers End Road, Stansted, CM24 1SJ United Kingdom Tel: +44 (0) Web: Part No: TD-GSG-1 Version 2
Sateon Advance Single-Blade Controller Installation Guide
ateon dvance ingle-lade Installation Guide The dvance ingle-lade (Part No: T-DV-C-NG) is an access control system controller for use with ateon host software. It allows the connection of either one 2 Door
More informationACTpro Single Door IP Controller. Operating & Installation Instructions
ACTpro 1500 Single Door IP Controller Operating & Installation Instructions 18-00079 Issue 1 This manual refers to the ACTpro 1500 a TCP/IP based control unit supporting up to 32 doors. Access Control
More informationACTPRO ACCESS CONTROL. Specification Guide
ACTPRO ACCESS CONTROL Specification Guide Table of Contents Glossary of Terms... 2 General System Specification Overview... 3 Hardware Requirements... 4 Four Door IP Controller... 4 Two Door IP Controller...
More informationACTpro 1500 Single Door IP Controller
ACTpro 1500 Single Door IP Controller ACTpro 1520 Single Door IP Controller with 12 V DC 2 amp power supply. Operating & Installation Instructions 18-00085 Issue 2 This manual refers to the ACTpro 1500
More informationNetGen Hardware Installation Guide. for NetGen Ethernet Door Controllers
NetGen Hardware Installation Guide for NetGen Ethernet Door Controllers 0613 Table of Contents BLUEWAVE SYSTEM OVERVIEW...2 THE WI-FI LOCK AND SECURITY COMPANY...2 NETGEN DOOR CONTROLLERS...2 INSTALLATION
More informationQuick Start Installation Guide
apc/l Quick Start Installation Guide Version A2 Document Part Number UM-201 May 2010 OVERVIEW The apc/l is an intelligent access control and alarm monitoring control panel which serves as a basic building
More informationAccess Control Technology Ltd. reserve the right to change the contents of this manual and the system it applies to without prior notice.
Installation Manual Operating & Installation Instructions This manual refers to the ACTpro elock Hub, a TCP/IP based control unit supporting up to 32 elock doors. Access Control Technology Ltd. reserve
More informationIPassan Installation guide
IPassan Installation guide 1 Content 1 Overview... 3 1.1 Features... 3 1.2 Hardware... 3 1.2.1 s... 3 1.2.2 Extra modules... 5 1.3 IPassan manager... 7 2 Installation... 7 2.1... 8 2.1.1 Power supply...
More informationinstallation quick guide integrated access control & environmental monitoring
installation quick guide integrated access control & environmental monitoring Introduction This Installation Quick Guide is suitable for standard wallmountable AX300 controllers. Illustrative technical
More informationSalto Offline Lock Integration Guide
Salto Offline Lock Integration Guide August 2015 SATEON Salto Offline Lock Integration Guide Issue 1.0, released August 2015 Disclaimer Copyright 2015, Grosvenor Technology. All rights reserved. SATEON
More informationInstallation & User Manual V2.08
YOUR SECURITY IS OUR PRIORITY Other products from GSD Contents Installation Instructions Installation Diagrams System Overview Wiring Diagrams Network Diagrams Operation Instructions Fingerprint Enrollment
More informationSF200. Installation Guide & Quick Start Guide. 2 TFT AC Terminal Version: 1.0 Date: June 2014
SF200 Installation Guide & Quick Start Guide 2 TFT AC Terminal Version: 1.0 Date: June 2014 All design and specification declared are subject to change without notice in advance. Contents Safety Precautions
More informationSynergis Master Controller 2.2 Integration Guide for Axis Interface Modules
Synergis Master Controller 2.2 Integration Guide for Axis Interface Modules This guide supplements the Synergis Master Controller Configuration Guide and explains how to configure Axis interface modules
More informationInstallation & User Manual
Contents Installation Instructions 3 Installation Diagrams 4 System Overview 6 Wiring Diagrams 8 Network Diagrams 9 Operation Instructions Fingerprint Enrollment 12 21 Wi-Enterprise Controller www.transmittersolutionssmart.com
More informationControlsoft Identity and Access Management Software Controlsoft Identity Access Management Software
Controlsoft Identity Access Management Software IA Server Software Installation Guide v8.0.229 2018 Controlsoft Ltd 9010-0050 Issue 6 Page 1 of 39 29/10/2018 Contents 1. Introduction... 3 1.1. PC Specifications...
More informationAgenda. August 23, 2017 Slide 2
Welcome IP Basic Agenda 01 Product portfolio 02 Planning (1) power consumption rule (2) distance rule 03 Commissioning (1) device detail (2) commission overview a. addressing b. programming access 04 Typical
More informationUC-2000 Installation Manual Unicorn Computers Technology Limited
UC2000 Installation Manual Copyright 2003. All rights reserved. Table of Contents Specifications 2 Enclosure for the UC2000 Controller 3 Unicorn Access Control System Configuration 4 UC2000 Controller
More informationusing optional EMX 190 expansion modules), and makes access decisions based on its own distributed
Infinity ACX 700 Access Control Unit The Infinity ACX 700 is a programmable, stand-alone access controller that is a basic building block of the Infinity Security Management System. Each ACX 700 controls
More informationEthernet/Network Communications Module. Installation and Programming Manual. LINQ2 - Two (2) Port Connectivity Module. More than just power.
Ethernet/Network Communications Module Installation and Programming Manual LINQ2 - Two (2) Port Connectivity Module DOC#: LINQ2 Rev. 060514 More than just power. Overview: Altronix LINQ2 network module
More informationImproX IXP20 Controller INSTALLATION MANUAL
MODEL NUMBER: ISC920-0-0-GB-XX ISC921-5-0-GB-XX IXP20 CONTROLLER SPECIFICATIONS Working Environment Plastic Housing... Power ImproX IXP20 Controller INSTALLATION MANUAL Designed to work in an indoor (dry)
More informationAccess Control System
Access Control System Version 3.0 Hardware and Software Installation Guide Long Range RFID (UHF) Readers and Tags Specialist Smart Key Access Control System Installation Guide i Smart Key Contact Information
More informationpro ACTpro IOM INPUT/OUTPUT MODULE Installation and Configuration Instructions for the ACTpro IOM Input/Output Module ACT Product Code: ACTPRO IOM
pro ACTpro IOM INPUT/OUTPUT MODULE Installation and Configuration Instructions for the ACTpro IOM Input/Output Module ACT Product Code: ACTPRO IOM pro CONTENTS Technical Specification... 4 Product Overview...
More informationNS1 Connection Unit Guide
PURPOSE AND APPLICATION Connection Unit Guide The connection unit is an installation friendly device, which makes it possible to use all features from a central unit. The CU can also be used to connect
More informationAccess control panel U-Prox IC E (Elevator control)
1.003 Access control panel U-Prox IC E (Elevator control) Installation and programming manual About this document http://u-prox.com This manual covers installation, adjustment and use of U-Prox IC E (hereinafter
More informationIS-DM320, HB User Manual. Ver 1.0
IS-DM320, HB User Manual Ver 1.0 Sentry360 2014 Table of Contents 1. Overview... 3 1.1 Features... 3 1.2 Package Contents... 4 1.3 Dimensions... 5 1.4 Connectors... 6 2. Camera Cabling... 7 2.1 Connect
More informationAXIS Camera Station S20 Appliance Series AXIS Camera Station S2008 Appliance AXIS Camera Station S2016 Appliance AXIS Camera Station S2024 Appliance
AXIS Camera Station S2008 Appliance AXIS Camera Station S2016 Appliance AXIS Camera Station S2024 Appliance User Manual Table of Contents About the AXIS Camera Station S20 Appliance Series.............
More informationCRC220 and CRC221 INSTALLATION GUIDE. REF No.: DOC0014 ISSUE: 09
CRC220 and CRC221 INSTALLATION GUIDE REF No.: DOC0014 ISSUE: 09 30th July 2015 2 Contents CRC220 & CRC221 INSTALLATION GUIDE 1. Scope 1-1 2. Introduction 2-1 2.1 Features 2-1 2.1.1. PCB Features 2-1 2.1.2.
More informationGV-AS200 Controller. Hardware Installation Guide
GV-AS200 Controller Hardware Installation Guide Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 2008 GeoVision, Inc.
More informationEnCell Battery Cell Monitor
EnCell Battery Cell Monitor Instruction Manual Model RCM15S12 NERC Compliant YO R U H T PA TO Z O R E W O D N M I T E enchargepowersystems.com sales@enchargepowersystems.com (888) 407.5040 Contents 1 Warnings,
More informationVicon VAX SYSTEM OVERVIEW. Web-Based, Power Over the Ethernet (POE) Access Control System.
VAX Access Control VAX Components SYSTEM OVERVIEW Web-Based, Power Over the Ethernet (POE) Access Control System. POE Single Door Controller embedded with request to exit motion detector. POE Two Door
More informationIEI emerge MicroNode Install and Setup Guide. Contents
IEI emerge MicroNode Install and Setup Guide Contents Connecting power and the network to the MicroNode... 2 Using Power over Ethernet (PoE)... 3 or... 3 Using a 12 VDC power supply... 3 Connecting and
More informationIntelli-M eidc Quick Start Guide. infinias
Intelli-M eidc Quick Start Guide infinias Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus
More informationIS-BX-12 User Manual
IS-BX-12 User Manual Ver 1.0 Sentry360 2014 Table of Contents 1. Overview...3 1.1 Features... 3 1.2 Package Contents... 4 1.3 Dimensions... 4 1.4 Connectors... 5 1.5 Light Sensor... 6 2. Camera Cabling...6
More informationACCESS CONTROL PC BASED DOOR ACCESS CONTROL
ACCESS CONTROL PC BASED DOOR ACCESS CONTROL DESKTOP WEB MOBILE INSTALLATION & HARDWARE GUIDE: ISSUE 2019/1 Door Control Unit Installation... 4 Planning... 4 Power Supply... 4 Cable & Wiring Choices...
More informationOperating Manual. Version 7.3.4
Operating Manual Version 7.3.4 March 2011 Index Page 1. Installation instructions 4 1.1 System requirements 4 1.2 Installation procedure 4 1.3 Meitav-tec USB adaptor installation 7 2. Open Maxinet and
More informationSETUP GUIDE INSTALLATION HANDBOOK. For Integrators, Installers and Administrators. Everything on how to get Kisi up and running. getkisi.
SETUP GUIDE INSTALLATION HANDBOOK For Integrators, Installers and Administrators Everything on how to get Kisi up and running getkisi.com 1 TABLE OF CONTENT 13 14 INSTALLING KISI AS A STAND-ALONE SYSTEM
More informationDS-K2600 Series Access Controller. Quick Setup Guide. Ness V1.0
DS-K2600 Series Access Controller Quick Setup Guide Ness V1.0 This is a Quick Setup Guide for Ness Version of Hikvision DS-K2604 4 Door Access Controllers. For full details refer Ness Full User Manual
More informationSuprex Ethernet SPX-7200 Ethernet Reader-Extender
Suprex Ethernet SPX-7200 Ethernet Reader-Extender Product Manual 1 SPX-7200_MAN_181206 Cypress Integration Solutions 35 Years of Access Control Ingenuity CypressIntegration.com 2018 Cypress Computer Systems
More informationInstalling Sentor. Hardware Installation
Remote base site monitoring and control Installing Sentor Hardware Installation Copyright 2000 Sentor Monitoring Systems Pty Ltd Contents: 1 Introduction... 1 2 Sentor GUI... 2 3 ST3000 Controller... 3
More informationGV-I/O Box 4E. Contents
GV-I/O Box 4E Contents 1.1 Key Features... 2 1.2 System Requirements... 2 1.3 Packing List... 2 1.4 Overview... 3 1.5 Connecting to PC... 4 1.5.1 RS-485 Wiring... 4 1.6 Assigning Device ID to GV-I/O Box
More informationStartup Guide. NetAXS-123. Version 5.2
NetAXS-123 Startup Guide Version 5.2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
More informationIS-DM240, V User Manual. Ver 1.0
IS-DM240, V User Manual Ver 1.0 Sentry360 2014 Table of Contents 1. Overview... 3 1.1 Features... 3 1.2 Package Contents... 4 1.3 Dimensions... 6 1.4 Switch / Connector Definition... 7 2. Camera Cabling...
More informationC5S120 Installation and Connection Guide
C5S120 Installation and Connection Guide Version: V1.1 1. Cautions Please note the following cautions. Mis-operation may lead to personal injury or equipment failure: 1) Do not energize the system before
More informationF6-Fingerprint. Access Control/Reader. User Manual. F6 - Simplified Instruction. (Master Code) # (Factory default:1234) Enter the Programming Mode
-Fingerprint Access Control/Reader Function Description Enter the Programming Mode - Simplified Instruction Operation (Factory default:1234) Change the Master Code Add Fingerprint User Add Card User Add
More informationAmano (itrt) Intelligent Twin Reader Terminal INSTALLATION MANUAL
MODEL NUMBER: XRT910-0-0-AC-XX XRT920-0-0-AC-XX AMANO itrt Amano (itrt) Intelligent Twin Reader Terminal INSTALLATION MANUAL SPECIFICATIONS Working Environment Plastic Housing... Power Designed to work
More information801 Avenida Acaso, Camarillo, Ca (805) Fax: (805)
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 Fax: (805) 494-8861 www.sdcsecurity.com E-mail: service@sdcsecurity.com IP Pro IP-Based Single Door Controller Operations & Installation Manual P:\INSTALLATION
More informationSingle Door Standalone Access Control User Manual
Single Door Standalone Access Control User Manual Reading this manual carefully before install and use the device 1. Packing List Name Quantity Remarks Keypad User manual Screw driver Rubber plug Self
More informationOtis Compass Elevator Integration Guide
Otis Compass Elevator Integration Guide November 2015 SATEON Otis Compass Elevator Integration Guide Issue 2.0, released November 2015 Disclaimer Copyright 2015, Grosvenor Technology. All rights reserved.
More information1 IF-812 or IF-815 Terminal (Slave) 2 Intended Use. 3 Assembly and Installation _V IF-812/IF-815
95-10324_V2016-11-23 IF-812/IF-815 1 IF-812 or IF-815 Terminal (Slave) Thank you for choosing an Interflex system. With an IF-812 or IF-815 terminal (slave), you have purchased a reliable device for capturing
More information1 IF-810 or IF-811 Terminal (Slave) 2 Intended Use. 3 Assembly and Installation _V IF-810/IF-811
95-10326_V2016-10-20 IF-810/IF-811 1 IF-810 or IF-811 Terminal (Slave) Thank you for choosing an Interflex system. With an IF-810 or IF-811 terminal (slave), you have purchased a reliable device for capturing
More informationEC-11 Ethernet Converter
EC-11 Ethernet Converter PSTN Contact ID to TCP Converter Installation and Operations Manual Version 8.H3.MID 1 Table of Contents About EC-11 Ethernet Converter... 3 Circuit Board Layout and Wiring Diagram...
More informationDOLXFD1000B. Waterproof Access Control/Reader
DOLXFD1000B Waterproof Access Control/Reader INTRODUCTION The DOLXFD1000B is a single- entry multi-function Access Controller with integrated keypad and card reader. It is designed and manufactured to
More informationAccess Control System Document Number: , Rev. D. Installation Guide. Essential Essential Plus Elite 36 Elite 64
Essential Essential Plus Elite 36 Elite 64 Access Control System Document Number: 620-100239, Rev. D Installation Guide USA & Canada (800) 421-1587 & (800) 392-0123 (760) 438-7000 - Toll Free FAX (800)
More informationVertX. V100, V200 and V300. Installation Guide Barranca Parkway Irvine, CA USA. November Rev A.1
15370 Barranca Parkway Irvine, CA 92618 USA VertX V100, V200 and V300 Installation Guide November 2011 6080-930 Rev A.1. Contents Introduction... 3 Parts List... 3 Product Specifications... 3 Cable Specifications...
More informationConfiguration and Operation Manual for the SALTO
AxxonSoft Configuration and Operation Manual for the SALTO Integration Module Version 1.2 Moscow, 2011 Contents CONTENTS... 2 1 LIST OF TERMS... 3 2 INTRODUCTION... 4 2.1 Purpose of document... 4 2.2 Structure
More informationTAC I/NETTM 1284, 1280, Security Control Unit
TAC I/NETTM The SCU () family of modular, stand-alone controllers are basic building blocks of the I/NET Seven Security Management System, and provide a flexible mix of door control and alarm monitoring
More informationievo ULTIMATE INSTALLATION GUIDE
ievo ULTIMATE INSTALLATION GUIDE DOC0066 ISSUE: 03 26th April 2017 ievo READER INSTALLATION GUIDE Issue 03 2 ievo READER INSTALLATION GUIDE Issue 03 Contents 1. Introduction 1-1 1.1 Advice on User Registration
More informationAmano Nexus Lite Controller INSTALLATION MANUAL
SPECIFICATIONS Working Environment Plastic Housing... Power NEXUS LITE Amano Nexus Lite Controller INSTALLATION MANUAL MODEL NUMBER: ISC920-0-0-AC-XX ISC921-5-0-AC-XX Designed to work in an indoor (dry)
More informationInstallation Considerations: Included: Not Included:
Installation Considerations: See the Setup Guide for any details related to the steps in this guide; such as power requirements, rack mounting considerations, and other more in-depth instructions. The
More informationContents 1 Warnings, Cautions, and Notes Description Features... 1
EnCell Contents 1 Warnings, Cautions, and Notes... 1 2 Description... 1 3 Features... 1 3.1 STANDARD FEATURES... 1 3.2 FRONT PANEL FEATURES... 2 3.2.1 Display... 2 3.2.2 OK LED... 2 3.2.3 FAULT LED...
More informationS125 Multi-Purpose 125 KHz RFID Reader USER MANUAL. 9V/24V DC Operating Voltage, AC (optional) KHz RFID EM4100/2 Cards & Tags
S125 Multi-Purpose 125 KHz RFID Reader 44 mm USER MANUAL MULTI PURPOSE 84 mm ONLINE & OFFLINE MODE BUILT-IN RELAY 125 KHz RFID EM4100/2 Cards & Tags 9V/24V DC Operating Voltage, AC (optional) 3 Online
More informationGLOSSARY. See also: Access point
GLOSSARY A Access level A set of access points, each with a corresponding time schedule, that determine where and when a badge holder has permission to pass through an access point. See also: Access point
More information6222 Two Door Module Technical Operations Manual
6222 Two Door Module Technical Operations Manual TABLE OF CONTENTS Specifications...3 Overview...4 Operations...5 Custom Access Mode...5 Standard Access Mode...5 Offline Access Mode...5 Offline Memory...5
More informationInstallation Manual for D244X Series 24-volt Power Supplies
Installation Manual for D244X Series 24-volt Power Supplies D2441-B D2441-C D2443-B D2443-C D2445-B D2445-C D2400 Series 1A 24 volts 1A 24 volts 3A 24 volts 3A 24 volts 5A 24 volts 5A 24 volts Dycon Power
More informationSuprex RS-485 SPX-7500 Wired Reader-Extender
Suprex RS-485 SPX-7500 Wired Reader-Extender Product Manual SPX-7500_MAN_181206 Cypress Integration Solutions 35 Years of Access Control Ingenuity CypressIntegration.com 2018 Cypress Computer Systems 1778
More informationWiring Instructions v4
Wiring Instructions v4 GateKeeper h4.2 Technical Support support@gymmastersoftware.com USA: 415 678 1270 Australia: 03 9111 0323 : 03 974 9169 Copyright 2018 Treshna Enterprises. All rights reserved. 15
More informationUser Manual. cmt-svr Startup Guide
User Manual cmt-svr Startup Guide Table of Contents Chapter 1 Overview... 1 1.1 Specification... 1 1.2 Dimensions... 2 1.3 Connector pin designations... 3 1.4 USB host port and SD card slot... 3 1.5 Ethernet
More informationTable of Contents Overview... 2 Camera Cabling... 8 System Requirements Access Camera Setup Video Resolution... 18
Table of Contents 1. Overview... 2 1.1 Features... 2 1.2 Package Contents... 3 1.3 Dimensions... 5 1.4 Connectors (Indoor Only)... 6 1.5 Function Cables (Outdoor Only)... 7 2. Camera Cabling... 8 2.1 Power
More informationPower Xpert Meter 2000 Gateway Card Kit
Quick Start Guide IL02601011E Rev. 2 December 2011 PXM 2250 PXM 2260 IQ 250 IQ 260 Power Xpert Meter 2000 Gateway Card Kit Table of Contents Remove the Meter From Service.... 2 Disconnect Power Connections,
More informationSimple & Easy Installation
Security Alarm Simple & Easy Installation Integrated Security - Access Control Access Control Automation No Software Required Multiple Devices Inception is an integrated access control and security alarm
More information5.5 AS Layout. GeoVision Technical Handbook 77
5.5 AS400 5.5.1 Layout GeoVision Technical Handbook 77 5.5.2 Wiegand Reader Connection AS400 supports up to eight Wiegand 26 ~ 64bit readers Wiegand connection has a distance limitation of 30m (~ 100ft)
More informationINSTALLATION GUIDE. InBio Pro Series Access Control Panels. Date: June, 2016 Version: 1.3
INSTALLATION GUIDE InBio Pro Series Access Control Panels Date: June, 2016 Version: 1.3 2 What s in the Box 2 Screws & Anchors 2 Screwdriver 4 Diode CONTENT Contents What s in the Box...2 Optional accessories...4
More informationViZion DR + Wireless Install Guide
1 ViZion DR + Wireless Install Guide 1. Open the DR panel box. 2. Put aside the three cables from the top layer of Styrofoam for storage. These cables are only required for potential troubleshooting scenarios.
More informationDCP Data Collection PC
Ross Technologies Group, LLC DCP Data Collection PC The smart choice for your data collection needs The DCP family of terminals offers cost effective yet extremely powerful data collection functionality.
More informationSuprex Fiber Optic. Reader-Extender SPX-7400 SPX Product Manual. Reader-Extender. Manual. SPX-7400 Series EXP Suprex_FiberOptic_MAN_170502
Suprex Fiber Optic Reader-Extender SPX-7400 SPX-7410 Product Manual Reader-Extender Manual SPX-7400 Series EXP-2000 Suprex_FiberOptic_MAN_170502 Cypress Integration Solutions 30+ Years of Access Control
More informationHardware Installation
LOLM366912 The ipio-8 is a network attached, IP addressed digital input and output device. The ipio-8 can be controlled and monitored with a standard web browser. Multiple ipio-8 devices can communicate
More informationPRO3200 Professional Modular Access Control Hardware
PRO3200 Access Control Hardware As a part of the WIN-PAK software controlled hardware family the PRO3200 professional modular access control hardware is an advanced access control panel capable of providing
More informationInstallation Considerations: Included: Not Included:
Installation Considerations: See the Setup Guide for any details related to the steps in this guide; such as power requirements, rack mounting considerations, and other more in-depth instructions. The
More informationGateKeeperXpress Standalone or Networked Proximity Card Controller
RINGDALE GateKeeperXpress Standalone or Networked Proximity Card Controller Installation & User Manual Revision: 2.0 Date: August 2008 Part Number: Page 1 of 37 Table of Contents Table of Contents... 2
More informationOperations & Installation Manual
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 Fax: (805) 494-8861 www.sdcsecurity.com E-mail: service@sdcsecurity.com Operations & Installation Manual * Visit: sdcsec.com/ippro For Installation
More informationInstallation Guide. Avigilon ACM Embedded Controller
Installation Guide Avigilon ACM Embedded Controller 2016, Avigilon Corporation. Portions 2003-2014 HID Global Corporation. All rights reserved. AVIGILON, the AVIGILON logo, ACCESS CONTROL MANAGER and ACM
More informationWeb-based Access Control System. Employee access. EMBEDDED Web Browser
Web-based Access Control System NetAXS-123 Hybrid Access Control Panel Honeywell s web-based NetAXS controller provides solutions for installations of any size. NetAXS-123 enables users to securely manage
More informationAC-115 Compact Networked Single-Door Controller Hardware Installation and Programming
AC-115 Compact Networked Single- Controller Hardware Installation and Programming Copyright 2013 by Rosslare. All rights reserved. This manual and the information contained herein are proprietary to REL,
More informationWiring Guide. EP.NMiNi 2. Version 1.04 Last Updated:
Wiring Guide EP.NMiNi 2 Version 1.04 Last Updated: 31-01-2013 Before you begin Technical Support If you cannot find the answer to your question in this manual or in the Help files, we recommend you contact
More informationPRO2200 Professional Modular Access Control Hardware
PRO2200 Access Control Hardware As a part of the WIN-PAK software controlled hardware family the PRO2200 professional modular access control hardware is an advanced access control panel capable of providing
More informationOutdoor Motorized Dome. Quick Installation Guide 86085A
Outdoor Motorized Dome Quick Installation Guide 86085A3340020 Outdoor Motorized Dome Quick Installation Guide Please follow the installation steps below to set up Outdoor Motorized Dome IP Camera. Check
More informationVIS-3200 / VIS-3201 User Manual
2.4GHz Indoor Black Wireless Exit Button Receiver Keypad / Reader Access Control 500 Users Range of 50 Feet Delay and On/Off Toggle Mode Battery Operated Standalone No Software 1 VIS-3200 / VIS-3201 User
More informationMCX402DR-BRD I/O expander. Operating Manual
Roger Access Control System MCX402DR-BRD I/O expander Operating Manual Product version: 1.0 Firmware version: 1.0.2.255 Document version: Rev. B Design and application The MCX402DR-BRD is I/O expander
More informationIndustrial L2+ Multi-Port Full Gigabit. Managed Ethernet Switch IGS-10020MT / IGS-10020PT/HPT / IGS-10080MFT IGS-12040MT / IGS-20040MT / IGS-20160HPT
Industrial L2+ Multi-Port Full Gigabit Managed Ethernet Switch IGS-10020MT / IGS-10020PT/HPT / IGS-10080MFT IGS-12040MT / IGS-20040MT / IGS-20160HPT Quick Installation Guide Table of Contents 1. Package
More informationQuick Start Guide V5.0
Quick Start Guide V5.0 IDair, LLC Per the Unites States Government Code of Federal Regulations Title 47, Chapter I, Federal Communications Commission (FCC), this device complies with Subchapter A, Section
More informationSTANLEY MANUFACTURED ACCESS CONTROL ACCESS STARTER KIT EASY-TO-USE AND HIGHLY RELIABLE ACCESS CONTROL
STANLEY MANUFACTURED ACCESS CONTROL ACCESS STARTER KIT EASY-TO-USE AND HIGHLY RELIABLE ACCESS CONTROL 1 Access Control Starter Kit in-a-box 3 2 5 SIMPLE... EVERYTHING YOU NEED FOR A COMPLETE SYSTEM SCALABLE...
More informationCLIQ Web Manager. User Manual. The global leader in door opening solutions V 6.1
CLIQ Web Manager User Manual V 6.1 The global leader in door opening solutions Program version: 6.1 Document number: ST-003478 Date published: 2016-03-31 Language: en-gb Table of contents 1 Overview...9
More informationPower Xpert Meter 2000 Gateway Card Kit
Quick Start Guide IL02601011E PXM 2250 PXM 2260 IQ 250 IQ 260 Power Xpert Meter 2000 Gateway Card Kit Table of Contents Remove the Meter From Service... 2 Disconnect Power Connections, CTs, and Modbus....
More informationINSTALLATION INSTRUCTIONS 921P EntryCheck TM
80 Avenida Acaso, Camarillo, Ca. 90 (805) 494-06 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 9P EntryCheck TM The EntryCheck 9P Indoor/Outdoor Keypad is a surface mount
More informationAndover ContinuumTM Infinet II
Andover ContinuumTM Infinet II The i80 Series controllers are designed for control of Air Handling Units, Roof Top Units, and other mechanical plant equipment. Features 0 Choose the i80 model with the
More informationA list of distributors can be found on our website at -
8/04/203 Ins-30075-EX Net2 nano control unit Paxton For technical help please contact your distributor A list of distributors can be found on our website at - http://paxton.info/508 Documentation on all
More informationAX3000 Platine Terminal Ethernet TCP/IP
AX3000 Platine Terminal Ethernet TCP/IP Model 60 Installation Guide September 00 - Ref: I60IE010-1 Model AX3000/M60 The reproduction of this material, in part or whole, is strictly prohibited. For additional
More informationINSTALLATION INSTRUCTIONS 920P EntryCheck TM
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 920P EntryCheck TM The EntryCheck 920P Indoor/Outdoor Keypad is a surface-mount
More informationConnecting a Cisco Input Module
CHAPTER 4 Overview The optional Cisco Input Module (Figure 4-1) is attached to a Cisco Physical Access Gateway or Cisco Reader Module to provide additional connections for up to ten input devices. Each
More information2214 EVENT LOGGER MODULE FOR THE VX2200 SYSTEM
2214 EVENT LOGGER MODULE FOR THE VX2200 SYSTEM CONTENTS PAGE Manual Introduction 3 Product Overview 3 Operation and Connection 3 RS232 Connection 3-4 RS485 Connection 3-4 2214 PCB layout 5 RS485 Bus Terminal
More information