microphone user guide

Transcription

1 microphone user guide for all Phonic Ear microphones AT0655 behind-the-neck boom mic AT0655M behind-the-neck boom mic with mute AT0655R behind-the-neck boom mic for Radium AT0513 over-the-head boom mic AT0795-L infrared lapel mic AT0814 earhook mic AT0814M earhook mic with mute AT0816 FM collar mic AT0817 infrared collar mic AT0720 conference mic AT0164-L omni-directional lapel mic AT0667-L omni-directional lapel mic AT0291-L directional lapel mic AT0668-L directional lapel mic

2 AT0655/AT0655M/AT0655R behind-the-neck boom mic The AT0655 boom microphone is a lightweight, noise-canceling microphone worn on the head. It is used in very noisy environments or with a sound field system. 1 2 Key Flexible Gooseneck Small Bend headband to suit head size 3 4 White dot faces mouth LEFT EAR 2.5cm 4cm (1 in 1.5 in) 5 6 Insert plug into transmitter /Ant jack If you have the mute feature: Red band visible MIC ON: Button down MIC MUTED: Button up and red band is visible Press and release button to enable/disable mute function (AT0655M only).

3 AT0513 over-the-head boom mic The AT0513 boom microphone is a lightweight, noise-canceling microphone worn on the head. It is used in very noisy environments or with a sound field system. 1 2 Headpad Earpad rophone Arm Adjust earphone and headpad to fit comfortably over head 3 4 RIGHT EAR 2.5cm 4cm (1 in 1.5 in) 5 Insert plug into transmitter /Ant jack

4 AT0795-L infrared lapel mic The AT0795-L infrared lapel microphone is a lightweight, noisecanceling microphone worn around the neck. It is used with the VOCALIGHT sound field system. 1 2 rophone plug Slide metal clip on back of lapel mic through holes on plastic lavalier holder Plastic lavalier holder 3 4 Place lavalier around neck and slide microphone up or down to adjust position 20cm (8 in) 5 Insert plug into transmitter /Ant jack

5 AT0814/AT0814M earhook mic The AT0814 boom microphone is a lightweight, noise-canceling microphone worn over the ear. It can be used with SOLARIS, SPRITE, or EASY LISTENER transmitters. 1 rophone 2 Ear piece Mute Switch (AT0814M only) plug Pull earpiece forward and place earhook over ear 3 4 Use clip to secure cord to clothing Push earpiece back to secure earhook to ear Insert plug into transmitter /Ant jack 5 Red band visible MIC ON: Button down MIC MUTED: Button up and red band is visible Press and release button to enable/disable mute function (AT0814M only).

6 AT0816/AT0817 collar mic (check for availability) The collar microphone is a lightweight, noise-canceling microphone worn around the neck. It is used in very noisy environments or with a sound field system. FM mic (AT0816) rophone Infrared mic (AT0817) rophone Mute Switch Infrared Emitter plug plug 1 2 Place collar mic around neck and cross over to secure around neck. Place mic against chin to help align mic with mouth 5cm 10cm (2in 4in) 3 4 FM mic Red band visible Insert plug into transmitter /Ant jack Push down on clip, slide along cord to adjust position, then clip to clothing MIC ON: Button down MIC MUTED: Button up and red band is visible Press and release button to enable/disable mute function (FM collar mic only).

7 AT0720 conference mic The conference microphone is a small, unobtrusive omni-directional condenser microphone. It is designed for communication in meetings, round table discussions, or split-table communications. PE 300T, 571T, 471T 1 2 Connect microphone to transmitter (MIC or MIC/ANT jack) or 481FST AT0720 AT0721 For range greater than 3m/10ft, use the AT0721 y-cord to use two conference mics PE 300T, 571T, 471T or 481FST AT0720 AT Place conference mic on any hard, smooth, bare surface such as: Tabletop (no tablecloth) 3m/10ft Dinner plate Driver s license 4 Straighten cord 5 Turn transmitter power switch to MIC/AUX MIC/AUX

8 AT0291-L & AT0668-L directional lapel mics AT0164-L & AT0667-L omni-directional lapel mics The AT0291-L and AT0668-L directional lapel microphones and the AT0164-L and AT0667-L omni-directional lapel microphones are small, lightweight microphones with a windscreen*, clip, and lavalier cord for use with FM transmitters. To reduce the chance of feedback, avoid using omnidirectional lapel microphones with a sound field system. In noisy environments, choose a directional microphone. directional lapel mics AT0291-L AT0668-L 1 Windscreen omni-directional lapel mics AT0164-L AT0667-L Windscreen (optional) Windscreen (optional) Cord Cord Cord Cord or or or Thread lavalier through holes on clip and place around neck Loop lavalier around neck and clip to mic or clip mic to clothing Loop lavalier around neck and clip to mic or clip mic to clothing Loop lavalier around neck and clip to mic or clip mic to clothing * No windscreen with AT0164-L omni-directional mic u.s.: , then press 5 canada: outside u.s./canada: Call your local Phonic Ear dealer website: Phonic Ear Inc. Phonic Ear and the names of Phonic Ear products are /Rev. E/ trademarks or registered trademarks of Phonic Ear Inc. in the U.S. and other countries.