Details of the Han-Terminal block connector Han D AV Han D AV Distributor Han E AV Han ES AV

Transcription

1 Contents -Terminal Block Connectors Page Details of the -Terminal block connector D D Distributor E ES Terminal block connectors accessories

2 D Details Mounting example Terminal block connector D with mountable distributor Distributor Terminal block connector D Possibilities in switch cabinet The terminal block connectors can be supplied for left hand or right hand applications. Hence the ground and connecting terminal for contact no. 1 will always be accessible from above in both types of installation. Left or right hand mounting in the switch cabinet, therefore allows use of the same pre-prepared interface cable. left hand version right hand version Internal use on standard rails in the switch cabinet in conjunction with -Snap. Distributor versions for rail mounting Distributor lockable on standard rails or mountable at terminal block connector D Assembly of terminal block connectors Terminal block connectors can be mounted from the inside of the switch cabinet into standard bulkhead housings. Therefore pre-assembly is possible. 02 Standard bulkhead housing Terminal block connector

3 E Details Possibilities in switch cabinet The terminal block connectors can be supplied for left hand or right hand applications. Hence the ground and connecting terminal for contact no. 1 will always be accessible from above in both types of installation. Left or right hand mounting in the switch cabinet, therefore allows use of the same pre-prepared interface cable. left hand version right hand version Internal use on standard rails in the switch cabinet in conjunction with -Snap. version for rail mounting Assembly of terminal block connector The terminal block connector is fixed in the standard bulkhead housing in the normal way. Male or female insert housing (bulkhead mounting) E and ES with 16 and 24 pins can be mounted from the inside of the switch cabinet into standard bulkhead housings. Therefore pre-assembly is possible. Standard housing (bulkhead mounting) Terminal block connector E Counterparts For suitable mating inserts with screw, cage-clamp or crimp terminals, hoods and bulkhead housings please refer to the chapter

4 D Technical characteristics Specifications DIN VDE 0627 DIN VDE 0110 Approvals, Current carrying capacity The current carrying capacity is limited by maximum temperature of materials for inserts and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature. Control and test procedures according to DIN IEC Inserts Number of contacts (see current carrying capacity) Working voltage Test voltage U rms Pollution degree Insulation resistance Material Temperature range Flammability acc. to UL 94 V 0 Mechanical working life - Mating cycles 500 Working voltage acc. to UL/CSA 40, 64 + PE 10 A max. 250 V 2 kv 3 (C) Ω Polycarbonate - 40 O C +125 O C 600 V Wire gauge 0.75 mm² s Material copper alloy Surface - mating side 3 µm Ag - termination side tin plated resistance 4 mω Ambient temperature Screw terminal - mm mm 2 - AWG Tightening/test torque 0.5 Nm Identification strips Multi contour (MK) the following identification strips may be used l HARTING l Murrplastik KPX 5/10-5 l Weidmüller dekafix 5 l Phoenix 4 K DST 5 l Phoenix DS 5 l Phoenix RBS 5 l Phoenix ZB 5 l WAGO WSB 5 Wire gauge 1.5 mm² Ambient temperature À 40 D Á 64 D 10 the following identification strips may be used l Murrplastik KWI 5/10 l Murrplastik KWI 5/10-5 l Murrplastik KWI l Wieland 9705 A 5/10 l WAGO Mini - WSB Identification The individual terminals have the same identification as on the mating face. In addition each circuit may be separately labelled with identification strips fitted in the adjacent slots.

5 D Number of contacts 40, 64 Terminal block connectors Number of Part No. Identification contacts Male insert Female insert Drawing Dimensions in mm Left hand version Multi contour (MK) for female insert Left hand version for female insert Right hand version Multi contour (MK) for female insert Right hand version for female insert a b 40 D 51, D ,0 Stock items in bold type 11

6 D Distributor Technical characteristics Specifications DIN VDE 0627 DIN VDE 0110 Approvals, Mounting example Distributor on standard rail Distributor with terminal block connector D Distributor Number of contacts 20, 2 x 10, 4 x 4 16 A max. Working voltage 750 V Test voltage U rms 4 kv Pollution degree 3 (C) Insulation resistance Ω Material Polycarbonate Temperature range - 40 O C +125 O C Flammability acc. to UL 94 V 0 Working voltage acc. to UL/CSA 600 V s Material copper alloy Surface - termination side tin plated Screw terminal - mm mm 2 - AWG Tightening/test torque 0.5 Nm Identification strips the following identification strips may be used l HARTING l Murrplastik KPX 5/10-5 l Phoenix 4 K DST 5 l Phoenix RBS 5 l Phoenix ZB 5 l Phoenix DS 5 Identification The individual terminals have the same identification as on the mating face. In addition each circuit may be separately labelled with identification strips fitted in the adjacent slots. 12

7 D Distributor Terminals 20 Distributors Identification Terminals Part No. Drawing Dimensions in mm Distributor with screw terminals x x Optionally mountable on terminal block connectors D Stock items in bold type 13

8 E ES (cage-clamp terminal) Technical characteristics Specifications DIN VDE 0627 DIN VDE 0110 Approvals, Inserts Number of contacts 6, 10, 16, 24, 32 (2 x 16), 48 (2 x 24) + PE 16 A max. (see current carrying capacity) Working voltage E 400 V Working voltage ES 500 V Test voltage U rms 3 kv Pollution degree 3 (C) Insulation resistance Ω Material Polycarbonate Temperature range Flammability acc. to UL 94 V 0 Mechanical working life - Mating cycles 500 Working voltage acc. to UL/CSA s Material - 40 O C +125 O C 600 V copper alloy Surface - mating side 3 µm Ag - termination side tin plated resistance 4 mω Screw terminal - mm mm 2 - AWG Tightening/test torque 0.5 Nm Cage-clamp terminal - Wire gauge mm 2 - AWG Current carrying capacity The current carrying capacity is limited by maximum temperature of materials for inserts and contacts including terminals. The current capacity-curve is valid for continuous, not interrupted current-loaded contacts of connectors when simultaneous power on all contacts is given, without exceeding the maximum temperature. Control and test procedures according to DIN IEC Wire gauge 1.5 mm² Ambient temperature Identification strips E Multi contour (MK) the following identification strips may be used l HARTING 6 x l Murrplastik KPX 6 / 10 l Weidmüller dekafix 6.5 l Phoenix 4 K DST 6 l Phoenix DST 6 l WAGO WSB Wire gauge 2.5 mm² Ambient temperature 14 the following identification strips may be used l Murrplastik KWI 6/10 l Wieland 9705 A/6.7 l WAGO Mini - WSB Identification strips ES the following identification strips may be used l HARTING (6 x 15) l Murrplastik KWI 6/15 l Wieland 9705 A/6.7 l WAGO Mini - WSB À 6 E /ES Á 10 E /ES Â 16 E /ES Ã 24 E /ES Identification The individual terminals have the same identification as on the mating face. In addition each circuit may be separately labelled with identification strips fitted in the adjacent slots.

9 E Number of contacts 6-24 Terminal block connectors Number of Part No. Identification contacts Male insert Female insert Drawing Dimensions in mm Left hand version Multi contour (MK) for female insert Left hand version for female insert Right hand version Multi contour (MK) for female insert Right hand version for female insert a b 6 E 20 44,0 10 E 34 57,0 16 E E ,0 Stock items in bold type 15

10 ES Number of contacts 6-24 Terminal block connectors (cage-clamp terminal) Number of Part No. Identification contacts Male insert Female insert Drawing Dimensions in mm Left hand version for female insert a b 6 E 20 44,0 10 E 34 57,0 16 E E ,0 Right hand version for female insert 16 a b 6 E 20 44,0 10 E 34 57,0 16 E E ,0 Stock items in bold type

11 Accessories Fixing element Identification Part No. Drawing Dimensions in mm Fixing element for terminal block connector D and distributor Terminal block connectors D, Distributor Fixing element C-rail EN C 30 G-rail EN G 32 Rail EN x 7.5 or -35 x 15 Fixing element for terminal block connector E terminal block connector ES Terminal block connectors E Fixing element C-rail EN C 30 G-rail EN G 32 Rail EN x 7.5 or -35 x 15 There are moulded slots at the rear of the terminal block connectors and distributors to accept the fixing elements. When used these elements, for example, can be used to secure the connectors inside the switch cabinets on standard rails. For mounting Terminal block connector E / ES Terminal block connector D 6 E = 1 fixing elements 40 D, 64 D = 2 fixing elements 10 E, 16 E and 24 E = 2 fixing elements Distributor = 1 fixing elements Stock items in bold type 17

12 Accessories Identification Part No. Drawing Dimensions in mm Identification strips 88 pieces in one block 5 mm width 10 mm long fits terminal block connector D and distributor Identification strips 64 pieces in one block 6 mm width 10 mm long fits terminal block connector E 15 mm long fits terminal block connector ES Adapter for E to fit identification strips (SK-contour) single E E E E a 6 E E E E 87.4 Stock items in bold type