Thanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443

Transcription

1 Thanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item # IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST: 2 Metal Plate Stands 5 Greenery Sections 16 Spare Bulbs 6 Spare Fuses NOTES: Suitable for indoor / outdoor use. 8.5 ft. Height / 57 in. Outer Length / 42 in. Inner Length Save carton for future storage. To order, call West Chester, OH Made in China 0816 If you have any questions regarding this product, call and ask for our product specialists (Mon.-Fri. 9:00-5:00 EST) or productspecialist@improvementscatalog.com See many more products on the Internet! Canterbury Doorway Arch # Current instructions at Page 1 of 5

2 ASSEMBLY INSTRUCTIONS FOR THE FOLLOWING 5 STEPS, PLEASE REFERENCE THE BELOW DIAGRAM. Step 1: Take a Metal Plate Stand and connect it to the Greenery Section without a letter on one end and a letter A on the other end. The side without a letter should be placed down onto the stand. Step 2: Locate the Greenery Section with a letter A on one end and a letter B on the other end. Take the side with the letter A and connect it to to the matching letter A. Where the sections meet, there are 2 sets of nuts and screws. The nuts and screws are already in the holes, so you will need to screw them apart, insert the Greenery Section, then fasten the nuts and screws back. Step 3-4: Continue the process from Step 2 by matching up sections B to B, C to C, and D to D. Step 5: Take the other Metal Plate Stand and connect it to the Greenery Section with a D on the end. METAL PLATE STAND Canterbury Doorway Arch # Current instructions at Page 2 of 5

3 Step 6: Your arch is pre-lit with 380 miniature incandescent lights. Where each Greenery Section meets, there is a light set connection which has to be made. Starting on the left hand side of the arch, locate the male plug from the 1 st section and connect it to the female plug from the 2 nd section until you have worked your way around the whole arch. Take the last male plug from the 5 th section and insert it into a 120V wall outlet or into a U.L. approved extension cord or power strip (not included). NOTE: There are extra bulbs enclosed. If a bulb goes out, replace it in a timely manner, as it will lengthen the life of your light sets. Female Plug Male Plug STORAGE 1. Unplug the arch from the power source in your home or office. 2. Be sure to unplug the light set cords between sections. 3. Remove any ornaments and decorations that were added by you and did not come with the arch. 4. Disassemble the sections from one another. Continue until all sections, including the stands, are separated. 5. Place all the parts back into the storage box. When packing up the arch, please ensure that there is no undue strain or stress on the light sets so as to ensure they do not get cut, frayed, or damaged. The box will help prevent the arch from being damaged should it get bumped in your garage, basement, or other storage location. Tape the box shut to keep out any dust or insects. 6. Be sure to store the arch in a cool, dry area away from sunlight to ensure your arch will be ready for next season. Exposing your arch to excessive heat or humidity may damage your arch. DO NOT STORE ARCH IN A DAMP AREA OR IN AN AREA WHERE THE TEMPERATURE EXCEEDS 100ºF. DO NOT STORE THE CARTON UPRIGHT ON ITS SHORT END. STORE THE CARTON FLAT. Canterbury Doorway Arch # Current instructions at Page 3 of 5

4 CARE INSTRUCTIONS Dust gently using a soft cloth or fabric duster. Do not use any chemicals or solvents to clean. Handle light strings gently. Do not pull or tug light strings as this may inadvertently loosen the bulbs. TROUBLESHOOTING FOR LIGHTS If your lights are not working properly, following are some troubleshooting steps to try: 1. Check that the light set plugs are properly connected to your home or office wall outlet or other power source. 2. Check that there is power to the wall outlet or power source. 3. Check that all the plugs within the arch are securely connected and positioned correctly. 4. Check for loose bulbs or poor contacts in bulb sockets. Follow along the non-working light set and ensure each bulb is seated firmly inside each socket with its tab securely locked. DO NOT TWIST BULBS. 5. Look for any broken, burned out, or missing bulbs and replace as needed. 6. Replace non-working, missing, or broken bulbs as soon as discovered to avoid reducing the longevity of the light set. Not replacing bulbs promptly will cause too much voltage to go to the remaining lit bulbs. 7. Replace only with bulbs that came with the product or recommended by the manufacturer. Spare bulbs were included with your purchase. To Remove a Bulb: Undo bulb locking tab located on one side of the socket. Gently grasp the plastic base of the bulb. Do not pull on the glass bulb section. Pull up and out from socket. To Replace a Bulb: Align base of bulb and locking tab to socket. Push in until firmly seated. Lock tab securely. DO NOT TWIST BULB. Locking Tab 8. If none of the lights are working, check the fuse in the light set plug. If the fuse is blown (usually has darkened glass), replace the blown fuse by following the steps in the following diagram. There are spare fuses included for easy replacement. To Remove a Fuse: Gently slide the plug cover open. Lift blown fuse out of the socket. To Replace a Fuse: Place the new fuse into empty socket. Gently close cover. Canterbury Doorway Arch # Current instructions at Page 4 of 5

5 SAFETY INSTRUCTIONS PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS AND WARNING TAGS INCLUDED WITH THIS ARCH. SAVE FOR FUTURE USE. THIS ARCH IS SAFE FOR INDOOR AND OUTDOOR USE. Do not operate this product if the power cord or plug is damaged. Always inspect light sets and electrical cords for signs of damage or wear. If there are any observable defects, immediately dispose of them and replace with ones that are in working order. Be careful not to overload electrical circuits and do not string more than the manufactured recommended number of light set cords together. This seasonal use product is not intended for permanent installation or use. This product is not intended for commercial purposes. Do not secure the wiring of this product with staples or nails or place on sharp hooks or nails. Do not alter the construction of the wiring in anyway. Do not let lamps rest on the supply cord or on any wire. Unplug the product when leaving the house, retiring for the night or if left unattended. This is an electrical product - not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played with or placed where small children can reach it. Do not use this product for anything other than its intended use. Do not hang ornaments or other objects from the cord, wire or light string. Do not close doors or windows on the product or extension cords as this may damage the wire insulation. Do not cover the product with cloth, paper, or any material not part of the product when in use. Do not mount or support strings in a manner that can cut or damage the wire insulation. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. Do not place your arch where it is likely to wobble due to uneven floors or thick carpeting. Place arch on a level, hard, flat surface. This product should not be used with a voltage converter. Use only manufacturer specified replacement bulbs. Canterbury Doorway Arch # Current instructions at Page 5 of 5