LIMO LM Medical Series Version March 01, 2010 HIGH-POWER DIODE LASER

Size: px
Start display at page:

Download "LIMO LM Medical Series Version March 01, 2010 HIGH-POWER DIODE LASER"

Transcription

1 SMA905 Plug & Play connector for optical fibres Compact dimensions Passively cooled 2 temperature s (NTC/PT100) Optical data 1 CW nominal output power (W) Centre wavelength λ (nm) , 940, Tolerance of λ (nm) ± 10 (± 3) 3 Spectral width (FWHM) (nm) < 5 (<4) 3 Temperature drift of λ 4 (nm/k) ~0.3 - ~0.4 data core diameter (µm) 200 Numerical aperture optic connector SMA905 Electrical data Typical operation current (start of lifetime) (A) Max. Operation current (start of lifetime) (A) Max. Operation current (end of lifetime) (A) Typical threshold current (A) Typical efficiency (%) Typical slope efficiency (W/A) Operation voltage (V) < 1.9 > 1.7 Reverse voltage 0 Thermal conditions Diode operation temperature 5 ( C) Storage temperature ( C) Other specifications Expected lifetime 6 (hours) 20,000 RoHS 2002/95/EC and CE compliant YES Dimensions of head (connectors not included) (mm) 109 x 25 x 37 Weight (g) Optical 25 C heat sink temperature, 2 Other wavelength on request, 3 optional, 4 Depending on wavelength, 5 Measured by NTC/PT100 at temperature measurement hole defined in drawing, 6 According ISO 17526:2003(E); Optional accessories beam beam output power (mw) > 0.7 beam wavelength (nm) 635 beam voltage (V) 4-5 beam current (ma) < 120 Monitor Operation voltage (V DC ) 5 Monitor signal (V) voltage (V) 12 1 current (ma) < type PNP Telephone: Fax: sales@2000.co.uk website:

2 Product name identification: LIMO.F -DL - Power core diameter Wavelength Wavelength Tolerance T0=±10nm M0= no ,976,977, 978,979,980 M3= P0=no P2 = FKS0= no FKS1= fibre Accessories LIMO-SMA905-F, 1.5m or 3m Laser Diode Driver and TEC-cooler Different beam shaping optics (focussing, collimating, fibre-fibre) available Installation service and personal introduction on request Turn-key systems available Customized modules and fibres on request Example: LIMO20-F200-DL980-T0M3P0FKS0 This is a class IV product regarding CDRH regulations and a Laserklasse 4 product regarding DIN:EN The light emitted from this is invisible and/or visible and may be harmful to the human eye. Avoid looking directly into the, into the collimated beam along its optical axis, or directly into the fibre when the device is in operation. Considerations in Safety and Operation Operating the outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. Output powers in excess of specification will accelerate device aging. Operation at higher temperatures will accelerate device aging. ESD PROTECTION Electrostatic discharge is the primary cause of unexpected failure. Take extreme precaution Do not use thermal contact paste! LIMO provides appropriate carbon foil to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling s. All data provided are typically measured with a heat sink temperature of 25 C. All measurements are made with a LIMO reference fibre 200/280 µm, length 1.5 m, and non AR coated. Copyright 2008 LIMO GmbH. All rights reserved. All LIMO products are patent pending. Subject to change without notice. March 2010 Telephone: Fax: sales@2000.co.uk website:

3 SMA905 Plug & Play connector for optical fibres Compact dimensions Passively cooled 2 temperature s (NTC/PT100) Optical data 1 CW nominal output power (W) Centre wavelength λ (nm) Tolerance of λ (nm) ± 10 (± 3) 3 Spectral width (FWHM) (nm) < 5 (<4) 3 Temperature drift of λ 4 (nm/k) ~0.28 data core diameter (µm) Numerical aperture optic connector SMA905 Electrical data Typical operation current (start of lifetime) (A) Max. Operation current (start of lifetime) (A) Max. Operation current (end of lifetime) (A) Typical threshold current (A) 10 Typical efficiency (%) Typical slope efficiency (W/A) Operation voltage (V) < 1.9 Reverse voltage 0 Thermal conditions Diode operation temperature 5 ( C) Storage temperature ( C) Other specifications Expected lifetime 6 (hours) 20,000 RoHS 2002/95/EC and CE compliant YES Dimensions of head (connectors not included) (mm) 109 x 25 x 37 Weight (g) Optical 25 C heat sink temperature, 2 Other wavelength on request, 3 optional, 4 Depending on wavelength, 5 Measured by NTC/PT100 at temperature measurement hole defined in drawing, 6 According ISO 17526:2003(E); Optional accessories beam beam output power (mw) > 0.7 beam wavelength (nm) 635 beam voltage (V) 4-5 beam current (ma) < 120 Monitor Operation voltage (V DC) 5 Monitor signal (V) voltage (V) 12 1 current (ma) < type PNP Telephone: Fax: sales@2000.co.uk website:

4 Product name identification: LIMO.F -DL - Power core diameter ,806,807, 808,809,810, ,806,807, 808,809,810, Wavelength Wavelength Tolerance T0=±10nm M0= no T3=±3nm M3= P0=no P2 = FKS0= no FKS1= fibre Accessories LIMO-SMA905-F, 1.5m or 3m Laser Diode Driver and TEC-cooler Different beam shaping optics (focussing, collimating, fibre-fibre) available Installation service and personal introduction on request Turn-key systems available Customized modules and fibres on request Example: LIMO40-F400-DL808-T0M3P0FKS0 This is a class IV product regarding CDRH regulations and a Laserklasse 4 product regarding DIN:EN The light emitted from this is invisible and/or visible and may be harmful to the human eye. Avoid looking directly into the, into the collimated beam along its optical axis, or directly into the fibre when the device is in operation. Considerations in Safety and Operation Operating the outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. Output powers in excess of specification will accelerate device aging. Operation at higher temperatures will accelerate device aging. ESD PROTECTION Electrostatic discharge is the primary cause of unexpected failure. Take extreme precaution Do not use thermal contact paste! LIMO provides appropriate carbon foil to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling s. All data provided are typically measured with a heat sink temperature of 25 C. All measurement s are made with a LIMO reference fibre 200/280 µm or 400/480 µm, length 1.5 m, and non AR coated. Copyright 2008 LIMO GmbH. All rights reserved. All LIMO products are patent pending. Subject to change without notice. March 2010 Telephone: Fax: sales@2000.co.uk website:

5 SMA905 Plug & Play connector for optical fibres Compact dimensions Passively cooled 2 temperature s (NTC/PT100) Optical data 1 CW nominal output power (W) Centre wavelength λ (nm) Tolerance of λ (nm) ± 10 (± 3) 3 Spectral width (FWHM) (nm) < 5 (<4) 3 Temperature drift of λ 4 (nm/k) ~0.28 data core diameter (µm) Numerical aperture optic connector SMA905 Electrical data Typical operation current (start of lifetime) (A) Max. Operation current (start of lifetime) (A) Max. Operation current (end of lifetime) (A) Typical threshold current (A) 10 Typical efficiency (%) Typical slope efficiency (W/A) Operation voltage (V) < 1.9 Reverse voltage 0 Thermal conditions Diode operation temperature 5 ( C) Storage temperature ( C) Other specifications Expected lifetime 6 (hours) 20,000 RoHS 2002/95/EC and CE compliant YES Dimensions of head (connectors not included) (mm) 109 x 25 x 37 Weight (g) Optical 25 C heat sink temperature, 2 Other wavelength on request, 3 optional, 4 Depending on wavelength, 5 Measured by NTC/PT100 at temperature measurement hole defined in drawing, 6 According ISO 17526:2003(E); Optional accessories beam beam output power (mw) > 0.7 beam wavelength (nm) 635 beam voltage (V) 4-5 beam current (ma) < 120 Monitor Operation voltage (V DC) 5 Monitor signal (V) voltage (V) 12 1 current (ma) < type PNP Telephone: Fax: sales@2000.co.uk website:

6 Product name identification: LIMO.F -DL - Power core diameter ,806,807, 808,809, ,806,807, 808,809,810 Wavelength Wavelength Tolerance T0=±10nm M0= no T3=±3nm M3= P0=no P2 = FKS0= no FKS1= fibre Accessories LIMO-SMA905-F, 1.5m or 3m Laser Diode Driver and TEC-cooler Different beam shaping optics (focussing, collimating, fibre-fibre) available Installation service and personal introduction on request Turn-key systems available Customized modules and fibres on request Example: LIMO40-F200-DL808-T0M3P0FKS0 This is a class IV product regarding CDRH regulations and a Laserklasse 4 product regarding DIN:EN The light emitted from this is invisible and/or visible and may be harmful to the human eye. Avoid looking directly into the, into the collimated beam along its optical axis, or directly into the fibre when the device is in operation. Considerations in Safety and Operation Operating the outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. Output powers in excess of specification will accelerate device aging. Operation at higher temperatures will accelerate device aging. ESD PROTECTION Electrostatic discharge is the primary cause of unexpected failure. Take extreme precaution Do not use thermal contact paste! LIMO provides appropriate carbon foil to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling s. All data provided are typically measured with a heat sink temperature of 25 C. All measurement s are made with a LIMO reference fibre 200/280 µm or 400/480 µm, length 1.5 m, and non AR coated. Copyright 2010 LIMO GmbH. All rights reserved. All LIMO products are patent pending. Subject to change without notice. March 2010 Telephone: Fax: sales@2000.co.uk website:

7 SMA905 Plug & Play connector for optical fibres Compact dimensions Passively cooled 2 temperature s (NTC/PT100) Optical data 1 CW nominal output power (W) Centre wavelength λ (nm) 915, 940, Tolerance of λ (nm) ± 10 (± 3) 3 Spectral width (FWHM) (nm) < 7 (<6) 3 Temperature drift of λ 4 (nm/k) ~ data core diameter (µm) Numerical aperture optic connector SMA905 Electrical data Typical operation current (start of lifetime) (A) Max. Operation current (start of lifetime) (A) Max. Operation current (end of lifetime) (A) Typical threshold current (A) 6 Typical efficiency (%) Typical slope efficiency (W/A) 0.9 Operation voltage (V) < 1.7 Reverse voltage 0 Thermal conditions Diode operation temperature 5 ( C) Storage temperature ( C) Other specifications Expected lifetime 6 (hours) 20,000 RoHS 2002/95/EC and CE compliant YES Dimensions of head (connectors not included) (mm) 109 x 25 x 37 Weight (g) Optical 25 C heat sink temperature, 2 Other wavelength on request, 3 optional, 4 Depending on wavelength, 5 Measured by NTC/PT100 at temperature measurement hole defined in drawing, 6 According ISO 17526:2003(E); Optional accessories beam beam output power (mw) > 0.7 beam wavelength (nm) 635 beam voltage (V) 4-5 beam current (ma) < 120 Monitor Operation voltage (V DC) 5 Monitor signal (V) voltage (V) 12 1 current (ma) < type PNP Telephone: Fax: sales@2000.co.uk website:

8 Product name identification: LIMO.F -DL - Power core diameter , 940, 975,976,977, 978,979, , 940, 975,976,977, 978,979,980 Wavelength Wavelength Tolerance T0=±10nm M0= no T3=±3nm M3= P0=no P2 = FKS0= no FKS1= fibre Accessories LIMO-SMA905-F, 1.5m or 3m Laser Diode Driver and TEC-cooler Different beam shaping optics (focussing, collimating, fibre-fibre) available Installation service and personal introduction on request Turn-key systems available Customized modules and fibres on request Example: LIMO60-F400-DL980-T0M3P0FKS0 This is a class IV product regarding CDRH regulations and a Laserklasse 4 product regarding DIN:EN The light emitted from this is invisible and/or visible and may be harmful to the human eye. Avoid looking directly into the, into the collimated beam along its optical axis, or directly into the fibre when the device is in operation. Considerations in Safety and Operation Operating the outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. Output powers in excess of specification will accelerate device aging. Operation at higher temperatures will accelerate device aging. ESD PROTECTION Electrostatic discharge is the primary cause of unexpected failure. Take extreme precaution Do not use thermal contact paste! LIMO provides appropriate carbon foil to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling s. All data provided are typically measured with a heat sink temperature of 25 C. All measurement s are made with a LIMO reference fibre 200/280 µm or 400/480 µm, length 1.5 m, and non AR coated. Copyright 2010 LIMO GmbH. All rights reserved. All LIMO products are patent pending. Subject to change without notice. March 2010 Telephone: Fax: sales@2000.co.uk website:

9 SMA905 Plug & Play connector for optical fibres Compact dimensions Passively cooled 2 temperature s (NTC/PT100) Optical data 1 CW nominal output power (W) Centre wavelength λ (nm) 915, 940, Tolerance of λ (nm) ± 10 (± 3) 3 Spectral width (FWHM) (nm) < 7 (<6) 3 Temperature drift of λ 4 (nm/k) ~ data core diameter (µm) Numerical aperture optic connector SMA905 Electrical data Typical operation current (start of lifetime) (A) Max. Operation current (start of lifetime) (A) Max. Operation current (end of lifetime) (A) Typical threshold current (A) 5 Typical efficiency (%) Typical slope efficiency (W/A) Operation voltage (V) < 1.7 Reverse voltage 0 Thermal conditions Diode operation temperature 5 ( C) Storage temperature ( C) Other specifications Expected lifetime 6 (hours) 20,000 RoHS 2002/95/EC and CE compliant YES Dimensions of head (connectors not included) (mm) 109 x 25 x 37 Weight (g) Optical 25 C heat sink temperature, 2 Other wavelength on request, 3 optional, 4 Depending on wavelength, 5 Measured by NTC/PT100 at temperature measurement hole defined in drawing, 6 According ISO 17526:2003(E); Optional accessories beam beam output power (mw) > 0.7 beam wavelength (nm) 635 beam voltage (V) 4-5 beam current (ma) < 120 Monitor Operation voltage (V DC) 5 Monitor signal (V) voltage (V) 12 1 current (ma) < type PNP Telephone: Fax: sales@2000.co.uk website:

10 Product name identification: LIMO.F -DL - Power core diameter ,940, 975,976,977, 978,979,980, ,940, 975,976,977, 978,979,980, 981 Wavelength Wavelength Tolerance T0=±10nm M0= no T3=±3nm M3= P0=no P2 = FKS0= no FKS1= fibre Accessories LIMO-SMA905-F, 1.5m or 3m Laser Diode Driver and TEC-cooler Different beam shaping optics (focussing, collimating, fibre-fibre) available Installation service and personal introduction on request Turn-key systems available Customized modules and fibres on request Example: LIMO40-F400-DL980-T0M3P0FKS0 This is a class IV product regarding CDRH regulations and a Laserklasse 4 product regarding DIN:EN The light emitted from this is invisible and/or visible and may be harmful to the human eye. Avoid looking directly into the, into the collimated beam along its optical axis, or directly into the fibre when the device is in operation. Considerations in Safety and Operation Operating the outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. Output powers in excess of specification will accelerate device aging. Operation at higher temperatures will accelerate device aging. ESD PROTECTION Electrostatic discharge is the primary cause of unexpected failure. Take extreme precaution Do not use thermal contact paste! LIMO provides appropriate carbon foil to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling s. All data provided are typically measured with a heat sink temperature of 25 C. All measurement s are made with a LIMO reference fibre 200/280 µm or 400/480 µm, length 1.5 m, and non AR coated. Copyright 2008 LIMO GmbH. All rights reserved. All LIMO products are patent pending. Subject to change without notice. March 2010 Telephone: Fax: sales@2000.co.uk website:

LIMO Line Laser System - PEX High Power Diode Laser System for Industrial Applications

LIMO Line Laser System - PEX High Power Diode Laser System for Industrial Applications General Description: Flat Panel Display The laser system is engineered to generate a homogeneous line of 80 mm x 0.2 mm. Componets: - 9x Laser modules - 9x Fibres - Beam Shaping Module - High power laser

More information

Up to 200 mw Uncooled 980 nm Pump Modules. TO T13 Series

Up to 200 mw Uncooled 980 nm Pump Modules. TO T13 Series Up to 200 mw Uncooled 980 nm Pump Modules TO T13 Series www.lumentum.com Data Sheet The Lumentum uncooled ultra-small form factor TO pump laser - T13 revolutionary chip and packaging design significantly

More information

600 mw Fiber Bragg Grating Stabilized 14xx nm Pump Modules with Ultra-Low Power Consumption. S35 Series

600 mw Fiber Bragg Grating Stabilized 14xx nm Pump Modules with Ultra-Low Power Consumption. S35 Series 600 mw Fiber Bragg Grating Stabilized 14xx nm Pump Modules with Ultra-Low Power Consumption S35 Series www.lumentum.com Data Sheet The Lumentum S35 series 14xx nm, Laser Diode pump is wavelength selected

More information

BRIGHTBOX-E1 LASER DIODE ENGINE

BRIGHTBOX-E1 LASER DIODE ENGINE 0 BRIGHTBOX-E1 BRIGHTBOX-E1 LASER DIODE ENGINE 1 GENERAL INFORMATION 2017 OPI Photonics S.R.L. All rights reserved. OPI Photonics S.R.L. reserves the right to make changes to this document at any time

More information

FAP 800-LB Series Long-Bundle Fiber Array Packages

FAP 800-LB Series Long-Bundle Fiber Array Packages Coherent Diode Lasers FAP FAP 8-LB Series Long-Bundle Fiber Array Packages Fiber Array Packages (FAP ) from Coherent are the highest quality fiber-coupled diode lasers in the industry, offering you the

More information

6W 808nm Uncooled Multimode Laser Diode Module

6W 808nm Uncooled Multimode Laser Diode Module 6W 808nm Uncooled Multimode Laser Diode Module BMU6-808-02-R01 Features: High output power of min. 6W 0.22NA 200μm core multimode optical fiber Hermetically sealed 2-pin package Floating anode/cathode

More information

FAP 600 Series. Highest quality fiber-coupled diode laser bars in the industry.

FAP 600 Series. Highest quality fiber-coupled diode laser bars in the industry. FAP 600 Series Highest quality fiber-coupled diode laser bars in the industry. Measurement tools for this laser: FieldMaster-GS SMA-Type Connector (P/N 33-1413-000) LM-150FS HTD (P/N 33-7873-000) Fiber

More information

Model 3955 DFB 1550nm Laser in TO-can

Model 3955 DFB 1550nm Laser in TO-can Model 3955 DFB 1550nm Laser in TO-can Applications Video signal distribution in HFC and FTTx nodes CWDM Signal distribution in L-band and wireless remoting links High linearity, low power fiber links Features

More information

10W 9xxnm Uncooled Multimode Laser Diode Module

10W 9xxnm Uncooled Multimode Laser Diode Module 10W 9xxnm Uncooled Multimode Laser Diode Module BMU10A-9xx-01/02-R Features: High output powers of 10W 0.15NA or 0.22NA 105μm core multimode optical fiber Hermetically sealed 2-pin package Floating anode/cathode

More information

1999PLU. Active Components Pump Laser Modules. Key Features. Applications. For more Info

1999PLU. Active Components Pump Laser Modules. Key Features. Applications. For more Info 1 Active Components s Key Features Up to 300 mw operating power Extended operating temperature range (5 C to +75 C) Fiber Bragg Grating (FBG) on PMF pigtail Telcordia GR468CORE qualified RoHS compliant

More information

ML-T-1550-FP-2G5 SERIES TECHNICAL SPECIFICATION

ML-T-1550-FP-2G5 SERIES TECHNICAL SPECIFICATION Document type: Document number: Version: Product specification TBD A1 Document name: ML-T-1550-FP-2G5 SERIES TECHNICAL SPECIFICATION Author: Reviewer: Approver: Release date: Pages: Sippe Savpe Uuspe 12-Apr-05

More information

RoHS COMPLIANT 2002/95/EC

RoHS COMPLIANT 2002/95/EC Superlum Broadband Light Sources cblmd-series (2nd Generation) Compact Broadband Light Technical Product Specification Document Number SL.3328.00.000D3 June 2017 Revision 001 ATTENTION ELECTROSTATIC SENSITIVE

More information

Genesis MX STM-Series

Genesis MX STM-Series Genesis MX STM-Series TEM00 Visible OEM and End-User OPS Laser Systems Applications like Flow Cytometry, Particle Counting, DNA Sequencing and Microscopy are enable by low noise, visible true CW lasers.

More information

D571-Type Digital, 1.5 µm Uncooled DFB Laser Module

D571-Type Digital, 1.5 µm Uncooled DFB Laser Module D571-Type Digital, 1.5 µm Uncooled DFB Laser Module Applications Long-reach SONET OC-3/STM-1, OC-12/STM-4 systems Telecommunications Secure digital data systems Benefits The low-profile D571-type laser

More information

976nm Laser Module Stabilized with Narrow-Bandwidth Grating

976nm Laser Module Stabilized with Narrow-Bandwidth Grating 976nm Laser Module Stabilized with Narrow-Bandwidth Grating Features: The II-VI Laser Enterprise single-mode laser module with narrow-bandwidth grating has been designed to provide the stringent noise

More information

A Global Laser Brand. Gated Cameo

A Global Laser Brand. Gated Cameo A Global Laser Brand The is a miniature laser diode module that has a threaded barrel for easy bulkhead mounting which ensures good thermal contact between module and heat sink. This new concept in laser

More information

SpectraTec X. Multi- λ Laser Light Source BLUE SKY RESEARCH WAVELENGTHS

SpectraTec X. Multi- λ Laser Light Source BLUE SKY RESEARCH WAVELENGTHS Multi- λ Laser Light Source BLUE SKY RESEARCH Up to four individual laser wavelengths One single mode PM fiber output Ultra-stable power output Compact : 165mm x 125mm x 34mm Integrated control and drive

More information

A Global Laser Brand. Versatile Module

A Global Laser Brand. Versatile Module A Global Laser Brand Versatile Module The Versatile Module The VM (Versatile Module) from Imatronic provides a high quality and cost effect OEM solution to a wide range of applications including Machine

More information

Cooled Dual Chip 14pin Butterfly 980nm Pump Laser Module. Applications

Cooled Dual Chip 14pin Butterfly 980nm Pump Laser Module. Applications Cooled Dual Chip 14pin Butterfly 980nm Pump Laser Module Features Two chips utilizing one carrier, one package and one TEC High output power, up to 600mW kink free Combined power of >1.0W with variable

More information

High Power Uncooled mbtf 980nm Pump Laser Module. Applications

High Power Uncooled mbtf 980nm Pump Laser Module. Applications UM96Z***-7* High Power Uncooled mbtf 980nm Pump Laser Module Features Up to 500mW kink-free power over full operating temperature range Operating temperature range from -5 C to +75 C (case) Polarization

More information

Monsoon Series. Data Sheet. High Power Laser Diode Bar on Micro-Channel Cooler and Multi-Bar Modules. Features:

Monsoon Series. Data Sheet. High Power Laser Diode Bar on Micro-Channel Cooler and Multi-Bar Modules. Features: Monsoon Series High Power Laser Diode Bar on Micro-Channel Cooler and Multi-Bar Modules Features: Mounted 10mm laser diode bar, various standard bar configurations (custom bar configurations available

More information

Ultra Low Noise Laser 1550nm

Ultra Low Noise Laser 1550nm Ultra Low Noise Laser 1550nm User Manual Version 1.01 Last Updated 07/13/17 www.apichip.com T: 310 642-7975 F: 310 642-7829 Page 1 of 10 Revision Table Revision Description 1.0 Initial release 1.01 Cable

More information

Genesis CX SLM-Series

Genesis CX SLM-Series Genesis CX SLM-Series Single Frequency UV and Visible OEM and End-User OPS Laser Systems Applications such as spectroscopy, interferometry, and holography require single-frequency lasers with narrow linewidths

More information

Uncooled mini-dil 980nm Pump Laser Module. Applications

Uncooled mini-dil 980nm Pump Laser Module. Applications LU96Z***-7* Uncooled mini-dil 980nm Pump Laser Module Features Up to 300mW kink-free power over full operating temperature range Operating temperature range from -5 C to +75 C Polarization maintaining

More information

Thread Mountable Cameo Laser Diode Module

Thread Mountable Cameo Laser Diode Module Thread Mountable Cameo Laser Diode Module Thread Mountable Cameo The Cameo is a unique, versatile, high quality industrial laser diode module widely used in alignment applications. Available in two models,

More information

StingRay and BioRay FEATURES

StingRay and BioRay FEATURES StingRay and BioRay Coherent s high-performance laser in a compact module, measuring only 19 mm in diameter, is the StingRay and BioRay product families. Modular design using the industries premier laser

More information

Single Photon Counting Module

Single Photon Counting Module Description Laser Components COUNT series of s has been developed to offer a unique combination of high quantum efficiency, wide dynamic range and ease of use for photon counting applications. Combining

More information

Coherent Magnum II. Structured Light Pattern Generating Laser FEATURES

Coherent Magnum II. Structured Light Pattern Generating Laser FEATURES Coherent Magnum II Structured Light Pattern Generating Laser Coherent s Magnum II structured light laser is a high-power line generator developed for the most demanding industrial applications. It is available

More information

Description. Applications

Description. Applications 3.5x3.5 mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features White SMD package, silicone resin. Low thermal resistance. Compatible

More information

980nm Pump Laser Module - Grating Stabilized, 300mW LC94

980nm Pump Laser Module - Grating Stabilized, 300mW LC94 980nm Pump Laser Module - Grating Stabilized, 300mW LC94 These lasers are designed as pump sources for Erbium-Doped Fiber Amplifier (EDFA) applications. Processes and techniques of coupling the fiber to

More information

Description. Kingbright

Description. Kingbright T-1 (3mm) SOLID STATE LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-7104GD-12V Green Features Description Low power consumption. Popular T-1 diameter

More information

Laser & Peltier - TEC - Driver

Laser & Peltier - TEC - Driver Laser & Peltier - TEC - Driver Type: ds11-la3.5v48-pa08v24-o8007-v0-598 Laser max.: 3.5A - 48V TEC max.: 8A - 24V (max. 150W) In: 110..230VAC - Analog or Digital Modulation - Bias Current option - Pilot

More information

High Power Uncooled mini-btf 980nm Pump Laser Module LU96***E-10R

High Power Uncooled mini-btf 980nm Pump Laser Module LU96***E-10R High Power Uncooled mini-btf 980nm Pump Laser Module LU96***E-10R Features: Up to 500mW kink-free power over full operating temperature range Operating temperature range from - 5 C to +75 C (case) Polarization

More information

UNION OPTRONICS CORP.

UNION OPTRONICS CORP. Features 1. Very narrow perpendicular divergence angle 2. High temperature operation 3. Standard optical power output:10mw (CW) 4. TO-56 (ψ5.6mm) Packaged, with Pb-free window cap. 5. Built-in Photo Diode

More information

NL-02 NL-02. The NL-02 InoxLaser uses time-offlight laser technology for continuous non-contact distance or level measurement.

NL-02 NL-02. The NL-02 InoxLaser uses time-offlight laser technology for continuous non-contact distance or level measurement. www.lightware.co.za info@lightware.co.za The InoxLaser uses time-offlight laser technology for continuous non-contact distance or level measurement. Able to measure to any solid surface, at any angle,

More information

SPEC NO: DSAO3608 REV NO: V.2B DATE: SEP/02/2015 PAGE: 1 OF 6 APPROVED:

SPEC NO: DSAO3608 REV NO: V.2B DATE: SEP/02/2015 PAGE: 1 OF 6 APPROVED: 1x1mm SMD CHIP LED LAMP (0.2mm Height) ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KPGF-1011GBRC-120 Features 1.0mmX1.0mm SMD LED, 0.2mm thickness.

More information

Descriptions. The Hyper Red source color devices are made with Low power consumption.

Descriptions. The Hyper Red source color devices are made with Low power consumption. T-1 3/4 (5mm) FULL COLOR LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-154A4SURKQBDZGW Features Descriptions Uniform light output. The source

More information

CC-M Multimode Cool & Control Module

CC-M Multimode Cool & Control Module CC-M Multimode Cool & Control Module A module to drive current and control temperature of high-brightness laser diodes up to 120W The Multimode Cool & Control (CC-M) module allows to control external single

More information

3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP. Descriptions. Features. Package Dimensions

3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP. Descriptions. Features. Package Dimensions 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APFA3010LSEEZGKQBKC Features 3.0x1.5x1.0mm right angle SMD LED,

More information

ic-tl6 BLCC Point Source LED

ic-tl6 BLCC Point Source LED Rev A1, Page 1/6 FEATURES High brightness Ultra Red LED Glass cover High temperature range -40 to 125 C SMD 1206 LED Package APPLICATIONS Illumination for high resolution optical encoder, PSDs and optical

More information

Descriptions. the LEDs. Kingbright

Descriptions. the LEDs. Kingbright T-1 3/4(5mm) BLINKING LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-56BHD Bright Red Features Descriptions T-1 3/4 package. The Bright Red

More information

300W 1.5kW, QUBE Fiber Lasers

300W 1.5kW, QUBE Fiber Lasers Technical Specification 300W 1.5kW, QUBE Fiber Lasers CONTENTS 1.1 SCOPE 2 1.2 OPTICAL SPECIFICATION 2 1.3 BEAM DELIVERY FIBER SPECIFICATION 3 1.4 ALIGNMENT LASER 3 1.5 POWER DISTRIBUTION 3 1.6 WATER COOLING

More information

UV-NIR LASER BEAM PROFILER

UV-NIR LASER BEAM PROFILER - Technical Data - CCD-1201 CCD-2301 CCD-2302 Standard Series Standard Series Standard Series SENSOR DATA Format: 1/2 2/3 2/3 Active area (without cover glass): 6.5mm x 4.8mm 9.0mm x 6.7mm 8.5mm x 7.1mm

More information

Survival Laser SL-VPB Laser Parts Bundle Assembly & Operation Instructions

Survival Laser SL-VPB Laser Parts Bundle Assembly & Operation Instructions Survival Laser SL-VPB Laser Parts Bundle Assembly & Operation Instructions WARNING: READ ALL INSTRUCTIONS AND THE ENCLOSED SAFETY PRECAUTIONS BEFORE ASSEMBLY AND USE Assemble and use these parts ONLY in

More information

5.0X6.0mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions

5.0X6.0mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions 5.0X6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA5060ZGS/E Green Features Single color. Suitable for all SMT assembly

More information

Descriptions. The Super Bright Red source color devices are made With built-in blinking IC.

Descriptions. The Super Bright Red source color devices are made With built-in blinking IC. T-1 3/4(5mm) BLINKING LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-56BSRD-B Super Bright Red Features Descriptions T-1 3/4 package. The Super

More information

Descriptions. Applications

Descriptions. Applications 3.5x3.5 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3535QB25Z1S Blue Features White SMD package, silicone resin. Low thermal

More information

LASERS FOR ANALYTICAL INSTRUMENTATION

LASERS FOR ANALYTICAL INSTRUMENTATION LASERS FOR ANALYTICAL INSTRUMENTATION CW Lasers (Broad and Narrow Spectrum) Nanosecond SLM Lasers Accessories ADVANTAGES One size One control interface One voltage (+5 VDC) One software Many wavelengths

More information

LASER SENSOR. Series LAS-T5 and LAS-T. Key-Features:

LASER SENSOR. Series LAS-T5 and LAS-T. Key-Features: LASER SENSOR Series LAS-T and LAS-T Key-Features: Content: Technical Data...2 Technical Drawing...3 Teach-In - Diagrams...3 Order Code... measurement ranges from 4 to mm linearity up to ±2 µm resolution

More information

panasonic.net/id/pidsx/global CCD The sensor can be used for various applications with its binary data output with four different sensing modes.

panasonic.net/id/pidsx/global CCD The sensor can be used for various applications with its binary data output with four different sensing modes. 1123 PHOTO PHOTO PARTICUR Type Edge Sensor SERIES Related Information General terms and conditions... F-3 About laser beam... P.1593~ guide... P.1021~ General precautions... P.1595 Conforming to FDA regulations

More information

LaserLyte-Flex Red & Green Alignment System

LaserLyte-Flex Red & Green Alignment System LaserLyte-Flex Red & Green Alignment System LaserLyte-Flex The LaserLyte-Flex is an entry-level laser alignment system. It uses interchangeable optics and a semiconductor laser diode to project a highly

More information

1500V - Vacuum Rated

1500V - Vacuum Rated Preliminary 8/20/2008 Mercury Digital Output Encoder System Installation Manual and Reference Guide 1500V - Vacuum Rated Customer Controller Vacuum Wall Manual No. IM-M1500V Rev S7 Introduction MicroE

More information

CUBE. Diode Laser System. Superior Reliability & Performance

CUBE. Diode Laser System. Superior Reliability & Performance Features Compact and modular OEM design Complete CDRH safety features for scientific and laboratory use TEC temperature-stabilized and conductively cooled through baseplate Analog and digital modulation

More information

Datasheet. Dragon1IR PowerStars. LED Solutions. ILH-ID01-xxxx-SC201-xx series. Product Overview. Applications. Technical Features:

Datasheet. Dragon1IR PowerStars. LED Solutions. ILH-ID01-xxxx-SC201-xx series. Product Overview. Applications. Technical Features: Datasheet Osram Oslon LEDs employed Dragon1IR PowerStars LED Solutions ILH-ID01-xxxx-SC201-xx series Product Overview Dragon1IR PowerStars employ the new Osram Opto Semiconductors Dragon Infrared LEDs.

More information

CinCam CCD - Technical Data -

CinCam CCD - Technical Data - - Technical Data - SENSOR DATA CCD-1201 CCD-1301 CCD-2301 CCD-2302 Format: 1/2 1/3 2/3 2/3 Active area: 6.5mm x 4.8mm 4.8mm x 3.6mm 9.0mm x 6.7mm 8.5mm x 7.1mm Number of pixel: 1388 x 1038 (1.4MPixel)

More information

Laser Diode Controller Instruction Manual

Laser Diode Controller Instruction Manual Russia, Moscow Tel. \ fax: (495) 333-93-01 www.nolatech.ru nolatech@mail.ru DLC-200 LD&TEC CONTROLLER Laser Diode Controller Instruction Manual Please read this Instruction Manual before using the unit.

More information

SPEC NO: DSAO1263 REV NO: V.1B DATE: JAN/23/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:

SPEC NO: DSAO1263 REV NO: V.1B DATE: JAN/23/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: 0.65X0.35mm SMD CHIP LED LAMP (0.2mm Height) PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KPG-0603PBC-TT-5MAV Blue Features 0.65mmX0.35mm

More information

5.0mm x 6.0mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions

5.0mm x 6.0mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions 5.0mm x 6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF5060QBFSURZGS Features Chips can be controlled separately. Suitable

More information

3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Descriptions. Package Dimensions

3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Descriptions. Package Dimensions 3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF3529LSEEZGKQBKS Features Outstanding material efficiency. Low power

More information

Diode Laser System. -with integrated water cooled Diode laser up to 400W optical output power

Diode Laser System. -with integrated water cooled Diode laser up to 400W optical output power Type: dst11-t19xx-ho -with integrated water cooled Diode laser up to 400W optical output power The product series dst11-t19-ho combines the features and reliability of OsTech Laser- and TEC controllers

More information

OSLON IR 72 PowerFlood

OSLON IR 72 PowerFlood OSLON IR 72 PowerFlood ILF-IO72-xxxx-SD40 series Product Overview At the heart of each Flood are 72 OSRAM IR OSLON Black Series which is today s smallest infrared LED with more than one watt of optical

More information

SLD-mCS/sCS-series Miniature High Power Broadband Light Source Modules

SLD-mCS/sCS-series Miniature High Power Broadband Light Source Modules SLD-mCS/sCS-series Miniature High Power Broadband Light Source Modules Technical Product Specification Document ID: SL.RD.01.001.170215 March 2017 Revision: 002 ATTENTION ELECTROSTATIC SENSITIVE DEVICES

More information

Models 1417 and 1437 User s Manual. High-Speed Photodetector Modules

Models 1417 and 1437 User s Manual. High-Speed Photodetector Modules Models 1417 and 1437 User s Manual High-Speed Photodetector Modules Handling Precautions The detector is sensitive to electrostatic discharges and could be permanently damaged if subjected even to small

More information

Safety. module carry a Class 4 Laser rating it emits invisible laser radiation(1064 central emission

Safety. module carry a Class 4 Laser rating it emits invisible laser radiation(1064 central emission Safety Please read this user manual carefully before operating the YDFLP fiber laser. It provides essential information regarding safety, product operation, and other necessary reference information. For

More information

OTEB-CO-B Series. Booster EDFA OPERATING MANUAL

OTEB-CO-B Series. Booster EDFA OPERATING MANUAL OTEB-CO-B Series Booster EDFA OPERATING MANUAL 24926 Highway 108 Sierra Village, CA 95346 Phone: (800) 545-1022 Fax: (209 586-1022 025-000533 Rev X6 E-Mail: sales@olsontech.com 27 Apr 2010 TABLE OF CONTENTS

More information

Single Photon Counting Module COUNT blue -Series

Single Photon Counting Module COUNT blue -Series Single Photon Counting Module COUNT blue -Series Description Laser Components COUNT blue series of Single Photon Counting Modules has been developed to offer a unique combination of high quantum efficiency,

More information

L-iC-282. Tunable White Linear LED Module, L-iC Series. 450 ma, 14.9 V. Electrical specifications. Lifetime specifications

L-iC-282. Tunable White Linear LED Module, L-iC Series. 450 ma, 14.9 V. Electrical specifications. Lifetime specifications L-iC-282 Tunable White Linear LED Module, L-iC Series 280 mm Tunable White module, adjustable colour temperature between 2700K and 6500 K High efficacy up to 165 lm/w at Tc = 50 C Accurate initial colour

More information

LASERS FOR ANALYTICAL INSTRUMENTATION

LASERS FOR ANALYTICAL INSTRUMENTATION LASERS FOR ANALYTICAL INSTRUMENTATION CW Lasers (Broad and Narrow Spectrum) Nanosecond SLM Lasers Accessories ADVANTAGES One size One control interface One voltage (+5 VDC) One software Many wavelengths

More information

Descriptions. Applications

Descriptions. Applications 3.5x3.5 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3535SEL1Z1S Hyper Orange Features White SMD package, silicone resin. Low

More information

Survival Laser SL-001.4PB Laser Parts Bundle Assembly & Operation Instructions

Survival Laser SL-001.4PB Laser Parts Bundle Assembly & Operation Instructions Survival Laser SL-001.4PB Laser Parts Bundle Assembly & Operation Instructions WARNING: READ ALL INSTRUCTIONS AND THE ENCLOSED SAFETY PRECAUTIONS BEFORE ASSEMBLY AND USE Assemble and use these parts ONLY

More information

RoHS COMPLIANT 2002/95/EC

RoHS COMPLIANT 2002/95/EC Document ID: SL.QC... May Revision: ATTENTION ELECTROSTATIC SENSITIVE DEVICES RoHS COMPLIANT /95/EC Page of 9 Contents Product Description / Applications / Features... Mechanical specification... Electrical

More information

F A B R Y - P E R O T L A S E R D I O D E S, P I G T A I L E D B U T T E R F L Y P A C K A G E

F A B R Y - P E R O T L A S E R D I O D E S, P I G T A I L E D B U T T E R F L Y P A C K A G E FABRY-PEROT LASER DIODES, PIGTAILED BUTTERFLY PACKAGE Integrated TEC Element FC/APC Connector Central Wavelength Between 785 nm and 2000 nm Application Idea Laser Diode with CLD1015 Mount FPL1009S 1550

More information

Turnkey Tabletop CW Laser Drive Module Part #LN-WLxx-RIN-Pxx

Turnkey Tabletop CW Laser Drive Module Part #LN-WLxx-RIN-Pxx Ver 3, 9-3-2018 Product Specification 5800 Uplander Way Culver City, CA 90230 Tel: (310) 642-7975 sales@apichip.com www.apichip.com Turnkey Tabletop CW Laser Drive Module Part #LN-WLxx-RIN-Pxx PRODUCT

More information

405 nm Diode Lasers. 14-pin BF, D-type OEM Module & Turn-key Systems. 405 nm Single-Mode Wavelength Stabilized Diode Lasers

405 nm Diode Lasers. 14-pin BF, D-type OEM Module & Turn-key Systems. 405 nm Single-Mode Wavelength Stabilized Diode Lasers 405 nm Diode Lasers 14-pin BF, D-type OEM Module & Turn-key Systems RPMC s proprietary Single-Mode Spectrum Stabilized Laser features high output power with ultra-narrow spectral bandwidth and a circularized

More information

SUBMINIATURE SOLID STATE LAMP. Features. Descriptions. Package Dimensions

SUBMINIATURE SOLID STATE LAMP. Features. Descriptions. Package Dimensions SUBMINIATURE SOLID STATE LAMP Part Number: AM2520SRC03 Super Bright Red ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Subminiature package. Gull wing lead.

More information

View. Angle 2Ө 1/2 ( ) Min.* Typ.* Typ. UVTOP355-FW-TO39

View. Angle 2Ө 1/2 ( ) Min.* Typ.* Typ. UVTOP355-FW-TO39 UVTOP355 v 2.1 20.09.2013 Description UVTOP355 is a series of AlGaN based deep UV-LEDs with a typical peak wavelength of 365nm and optical output power of 480-800 µw. It comes in hermetically sealed TO39

More information

SPEC NO: DSAJ9211 REV NO: V.6B DATE: SEP/06/2014 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED:

SPEC NO: DSAJ9211 REV NO: V.6B DATE: SEP/06/2014 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: T-1 (3mm) SOLID STATE LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: WP7104VW1C White Features Low power consumption. Popular T-1 diameter package.

More information

3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions

3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions 3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KA-3528ZGS Green Features Single color. Suitable for all SMT assembly

More information

Multimode Laser-532 Installation and Operation Manual

Multimode Laser-532 Installation and Operation Manual Multimode Laser-532 Installation and Operation Manual For Products: Model LASER-532-IP-LAB Document: 000-31000-010-02-201503 WARNING Protective Eye Wear Should Be Worn When Using This Instrument - Intense

More information

0603 SMD LED VAOL-S6SDRC C

0603 SMD LED VAOL-S6SDRC C Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself

More information

Laser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly

Laser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly Laser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly Laser Diode Collimators 48TE, 48-0, and 44TE, Laser Diode Base Unit 44TE LD Collimators Types 48TE, 48-0 and

More information

Chip LEDs with Bi-Color(Multi-Color)

Chip LEDs with Bi-Color(Multi-Color) Features: Package in 8 mm tape on 7 diameter reel. Compatible with automatic equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Description: The 19-22 SMD Taping

More information

JenLas D2.x. Disk Laser. Installation Instructions

JenLas D2.x. Disk Laser. Installation Instructions LASERS & MATERIAL PROCESSING I OPTICAL SYSTEMS I INDUSTRIAL METROLOGY I TRAFFIC SOLUTIONS I DEFENSE & CIVIL SYSTEMS Disk Laser JenLas D2.x Installation Instructions JENOPTIK l Lasers & Material Processing

More information

LX-562A. Linear LED Module, LX Series. 450 ma, 62.7 V. Electrical specifications. Lifetime specifications. Operating Conditions and Characteristics

LX-562A. Linear LED Module, LX Series. 450 ma, 62.7 V. Electrical specifications. Lifetime specifications. Operating Conditions and Characteristics LX-562A Linear LED Module, LX Series High lumen output 560 mm linear module, very high efficacy up to max. 179 lm/w at Tc = 65 C Extremely homogenous light distribution, pitch only 6,4 mm between single

More information

Diamond FLQ-Series. Q-Switched Fiber Lasers FEATURES & BENEFITS

Diamond FLQ-Series. Q-Switched Fiber Lasers FEATURES & BENEFITS Series Q-Switched Fiber Lasers The Coherent Series is a 1 μm pulsed laser delivering 1 mj pulse energy with a fast turn-on time and high peak power (up to 10 kw) over a wide range of repetition rates to

More information

SLD-CS-series Compact High Power Broadband Light Source Modules.

SLD-CS-series Compact High Power Broadband Light Source Modules. Superlum Broadband Light Sources SLD-CS-series Compact High Power Broadband Light Source Modules. Technical Product Specification Document ID: SL.RD.04.002.150508 December 2015 Revision: 002 ATTENTION

More information

5.0mm x 5.0mm SURFACE MOUNT LED LAMP. Features. Descriptions. Package Dimensions

5.0mm x 5.0mm SURFACE MOUNT LED LAMP. Features. Descriptions. Package Dimensions 5.0mm x 5.0mm SURFACE MOUNT LED LAMP Part Number: AAAF5051XQR412ZXS-N1 Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Suitable for all SMT assembly and solder

More information

3.5x2.8mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions

3.5x2.8mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions 3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAA3528SURKZGQBDS Features Suitable for all SMT assembly and solder process.

More information

MDM 011-Z1 Regen Resistor

MDM 011-Z1 Regen Resistor MDM 011-Z1 Regen Resistor Date of creation: 10.04.2017 Version date: 10.04.2017 Article number: 09-402-011-Z1-E Publisher: SIGMATEK GmbH & Co KG A-5112 Lamprechtshausen Tel.: 06274/4321 Fax: 06274/4321-18

More information

LED-Illumination with Control Unit Ident.-No

LED-Illumination with Control Unit Ident.-No A HAAG-STREIT COMPANY MÖLLER-WEDEL OPTICAL GmbH, Rosengarten 10, D-22880 Wedel with Control Unit Ident.-No. 773 190 01 Valid from Hardware / Software Rev. / SN 1.0 IDENT.-NO. 217 321 09 Document Version

More information

Mercury Manual No. IM-M1000 Rev G

Mercury Manual No. IM-M1000 Rev G Mercury 1000 Analog Output Encoder System Installation Manual and Reference Guide Manual No. IM-M1000 Rev G Introduction MicroE Systems was founded to advance encoder technology to a level never before

More information

Description. The Hyper Red device is based on light emitting diode chip Suitable for all SMT assembly and solder process.

Description. The Hyper Red device is based on light emitting diode chip Suitable for all SMT assembly and solder process. 5.0mm x 5.0mm FULL-COLOR SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KAAF-5050RGBS-13 Features Description Chips can be controlled

More information

Bridgelux Vero 13 Array Series. Product Data Sheet DS31

Bridgelux Vero 13 Array Series. Product Data Sheet DS31 Bridgelux Vero 13 Array Series Product Data Sheet DS31 BXRC-27x2000 30x2000 35x2000 40x2000 50x2000 Introduction Vero Vero represents a revolutionary advancement in chip on board (COB) light source technology

More information

LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC

LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC TM LTH3MM12V Series 3mm (T-1) Through Hole Built in Resistor for 12VDC LTH3MM12VFR44 - White Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 3 / 35 12 Volt Applications Automotive Indoor

More information

DigiPot Software Configuration Menu

DigiPot Software Configuration Menu C Option Centers the beam axially with the laser module s housing Available for the following modules: PM, PMT, SPM, & SPMT D Option Settings stored in nonvolatile memory Works with customer-supplied computer

More information

3.5x2.8mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions

3.5x2.8mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions 3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KAA-3528RGBS-11 Features Suitable for all SMT assembly and solder process.

More information

Laser Safety (Interlock) Shutter / X-RAY Shutter

Laser Safety (Interlock) Shutter / X-RAY Shutter Laser Safety (Interlock) Shutter / X-RAY Shutter EOP-SH-20 1 FEATURES AND ADVANTAGES Integrated return spring Model SH-10: 0.5" (13mm) aperture Model SH-20: 1" (25mm) aperture, larger optional Small size

More information

COBRA Slim Linescan Illuminator

COBRA Slim Linescan Illuminator COBRA Slim Linescan Illuminator Key Features Design: Slim and compact Field adjustable: focussing distance and diffusers Chip-on-Board: Extreme brightness and high uniformity Crystal Clear Line Scan Images

More information

Product Data Sheet DS32 BXRC-27x x x x x4000

Product Data Sheet DS32 BXRC-27x x x x x4000 Bridgelux Vero 18 Array Series Product Data Sheet DS32 BXRC-27x4000 30x4000 35x4000 40x4000 50x4000 Introduction Vero Vero represents a revolutionary advancement in chip on board (COB) light source technology

More information

A Global Laser Brand. LDM150, Sigma, LDM115, LDL175, LCG115 & LLM115

A Global Laser Brand. LDM150, Sigma, LDM115, LDL175, LCG115 & LLM115 A Global Laser Brand LDM150, Sigma, LDM115, LDL175, LCG115 & LLM115 Imatronic is a family of industry-standard laser diode modules from Global Laser. The ruggedised metallic housing of Imatronic lasers

More information