PERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.

Size: px
Start display at page:

Download "PERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac."

Transcription

1 Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac handles, front panels and accessories. Take our handles for instance. Rittal offers a wide range of types, including the CompactPCI specified self-locking injector/extractor handle for high pin count applications and the Type VII flush profile Telecom handle for limited I/O. What s more is we can provide advanced features, such as front panel and ESD protection, a microswitch for full hot swap applications, keying with 4096 combinations and drive chassis. Add to that a whole line of 3U/6U EMC and Non-EMC front panels and your package is complete more solutions from The Original CompactPCI Company. 7

2 R I T T A L R I P A C CompactPCI Handles CompactPCI Type IV handles... Page 9 Telecom Type VII handles... Page 9 Front Panels Keying... Page 20 CompactPCI solder side covers... Page 20 Embedded microswitch assembly... Page 20 CompactPCI Front Panels EMC front panels... Page 2 Non-EMC front panels... Page 2 Front panel layout dimensions... Page 22 CompactPCI Adapters Front panel adapters... Page 23 Board adapters... Page 23 9 Vario Chassis Horizontal drive chassis... Pages Vertical drive chassis... Page 26 8

3 Perfect Handling Solutions With... COMPACTPCI HANDLES. CompactPCI Handle Solution, Type IV The Ripac CompactPCI injector/extractor handle referred to in the CompactPCI specification is designed to meet the IEEE 0.0 and IEEE 0. standards. This Ripac Type IV injector/extractor handle provides for full front panel I/O usage and is suitable for system (subrack) front and rear (I/O) mounted boards. The handle locking/ unlocking device activating in the handle s embedded microswitch is a Ripac design feature. This solution complies nicely with the CompactPCI full hot swap requirements. Other features of this handle are: Keying of plug-in boards (4096 combinations) ESD protection Grounding connection for plug-in boards Tying of multiple handles together CompactPCI Injector/Extractor Handle Single CompactPCI slot width (4 HP) Grey bottom Part No piece Grey top Part No piece Black bottom Part No piece Black top Part No piece For double, triple and quadruple width, use additional tying pin: Part No piece Telecom Handle Or Alternative Handle Solution, Type VII This injector/extractor handle solution has all the features of the IEEE 0.0/0. and CompactPCI requirements (with limited front panel I/O space) and is designed for systems (subracks) conforming to IEEE 0.0 and IEEE 0. standards. However, this handle has one more distinguishing feature: the solder side (component side 2) of the can be optionally increased by 2.54mm (0. ) to provide for more surface mounted component space (this additional feature cannot be implemented for CompactPCI). Suitable as pluggable power supply handle per PICMG Draft 2.. Tying together of multiple handles also available. The Telecom Injector/Extractor Handle Black bottom Part No piece Black top Part No piece For double, triple and quadruple width, use additional tying pin: Part No Note: By mid 999 there will be an all-metal version available dealing with yet higher injection and extraction forces. Please inquire for status. B Tying pin A Labeling Multiple Handle Tying CompactPCI applications which require multiple width front panels (8 HP, 2 HP, 6 HP) may also require multiple width injector/extractor handles. A precision pin will nicely gang these handles together. Part No piece Handle Labeling The most simple and cost effective method of labeling can be applied to both types of injector/extractor handles mentioned above. Just choose your own type of self adhesive label and have them made, printed on a roll or print these labels yourself by using a sophisticated Bar Code printer. The CompactPCI handle label: 20mm width (4 HP) / 0mm length The Telecom handle label: 20mm width (4 HP) / 5mm or 3mm length 9

4 0. Keying Printed board () Guide rail Horizontal rail C B A D E F Board type plug-in unit alignment pin chamber, front panel I/O ESD or front panel grounding socket mis-insertion barrier F E D A C B Programming key 2. Color Packs of Kit No. Grey Red Material: PBT Position Position 3 Position 2 Position 4 Keying/programming possibilities per chamber (total 4096 programming possibilities at six keying chambers). See page 63 for more keying information. For front loaded CPCI boards Keying chamber For rear loaded CPCI boards Key insertion tool Part No * * available third quarter 999. Lever Hinge Lever Contact Point Optional Retention Screws 23 (2) 8.5 E (5.5) 3.7 (6.6) 9.9 Optional Retention Screw Front panels with injector/extractor handles may retain the pluggable boards in the system by only using the self-locking feature of the handle or by using retention screws. Note: For EMC applications. When using these optional retention screws you may not need to use the horizontal gasketing mounted to the subrack system front/rear horizontal rails. Part No pieces Retention clip Retention clip CompactPCI Solder Side Covers For Hot Swap The CompactPCI specification for full hot swap calls out for two types of ESD protection:. The ESD strips on the (see CompactPCI hot swap specifications). 2. The use of ESD covers on the rear side of the boards. (The rear side is also called the component side 2 or backside ). The solder side cover will prevent accidental contact of conductive components with neighboring boards. The material is of an antistatic and non-conductive nature. Hot spots on the component side 2 may require vent holes in the area of the hot spot (see perforated version). The required mounting hole sizes and positions are defined in the IEEE 0. standard and the CompactPCI specifications. See page 65 for more details. Solder side covers, not UL but anti-static/ non-conductive 0.3mm thick. (see page 65 for material specifications) Size Solid Part No. 6U x 60mm piece 6U x 80mm piece 3U x 60mm piece Solder side covers, UL 94-VO anti-static/ non-conductive 0.5mm thick. Size Perforated Solid Part No. Part No. 6U x 60mm piece 6U x 80mm piece 3U x 60mm piece Retention clip Part No pieces Note: The perforation is 2mmØ at a 0mm pitch. The 2mm connector pins are covered as well. X 2: Lever Hinge Lever Contact Point (2) 8.5 ~25mm E (5.5) (6.6) -2 Microswitch lever pushed down: injector/ extractor handle in locked position. -3 Microswitch lever not pushed down: injector/ extractor handle unlocked. 9.9 Le no Lever H Ripac Products For Hot Swap Applications Suitable for CompactPCI and other hot swap applications using a front panel injector/extractor handle operated device. Note: The required blue LED on the front panel is not offered and may be obtained otherwise. Microswitch Technical Data. Ratings: 30V DC, 5-50mA, resistive load (30,000 cycles) 60V DC, 5mA, resistive load (30,000 cycles) 60V DC, 500mA, resistive load (5,000 cycles) Operating Temp. -3 F (25 C) to + 58 F (+70 C) Humidity: RH 85% max Vibration: 0Hz to 55Hz, 8g Shock: 30g, msec The Embedded Microswitch Cable Assembly May be inserted into both the CompactPCI and the Telecom handle. Microswitch assembly includes: Microswitch 3 wires, 25mm x # 32 AWG Plug Retention clip Part No ( assembly) The mounted header may be a through hole mounted header or a surface mounted header. Through hole mounted header Part No piece Surface mounted header Part No piece Note: Minimum quantity is 0 pieces. 20

5 Smart Protection With Rittal... COMPACTPCI FRONT PANELS. 4 HP 4 HP >4 HP > 4 HP Non-EMC Front Panels For s (Flat) For Single Handles U Part No. 4 HP 8 HP 2 HP 6 HP U 6U 3U 6U Material: 2.5mm aluminum sheet Finish: anodized HP=5.08mm (0.2 ) EMC Front Panels For s (U-Channel) For Single Handles For CPCI handles, see page 9. For filler panels, see page 3. Non-EMC (flat) EMC (U-channel) U Part No. 4 HP 8 HP 2 HP 6 HP Material: 2.5mm aluminum extruded Finish: clear chromated 3U EMC Front Panel Kits With (Single) Type IV Handles Kit Includes: U-channel front panel piece holder piece EMC gasket piece Injector/ejector handle assembly piece, black Assembly parts HP Packs of Kit No U EMC Front Panel Kits With (Single) Type IV Handles Kit Includes: U-channel front panel piece EMC gasket piece Injector/ejector handle assembly 2 pieces, black Assembly parts Order optional holders separately. HP Packs of Kit No U EMC Front Panel Kits With (Single) Type IV Handles Kit Includes: U-channel front panel piece EMC gasket piece Injector/ejector handle assembly 2 pieces, black Assembly parts Order optional holders separately. HP Packs of Kit No >4 HP >4 HP Material removed 3U When multiple handles are used, please lock the handles with the tying pin. See page 9. 6U Non-EMC Front Panels For s (Flat) For Multiple Handles U Part No. 8 HP 2 HP 6 HP Material: 2.5mm aluminum sheet Finish: anodized HP=5.08mm (0.2 ) EMC Front Panels For s (U-Channel) For Multiple Handles U Part No. 8 HP 2 HP 6 HP Material: 2.5mm aluminum extruded Finish: clear chromated EMC Gaskets For EMC Front Panels U Part No. piece Kit No. 0 pieces Material: stainless steel 2

6 ± ± Maximum component space on front end 3U= ±0. 3.5± ± ±0. 3.5± U = / 9U = U = ±0./ ±0. 6U = ±0. / 9U = 389.2± ± ± Maximum component space on front end 6U=24.5, 9U= U = / 9U = U = / Front Panel Layout Dimensions 3U Front Panels 6U And 9U Front Panels B (HP) 4 HP B Ø 4 HP B (HP) B ± Ø 7.5±0. B csk 0±0. 3.4± ±0. 0.± ±0. component side component side 0.0±0. 3.4± ±0. component side 0.± ±0. component side Component Side Top View HP U B B 2 B 3 B 4 Tolerance B - X 2 Non-EMC Flat Front Panel X X B 3 + X B - X EMC U-Channel Front Panel 2 3 Front panel Holder To be used for 3U s on the top end and 6U s in the middle (optional). Part No piece Kit No pieces Material: die cast aluminum Note: An electronic file of these drawings is also available. Please contact Rittal. 22

7 Adapt Quickly With Rittal... COMPACTPCI ADAPTERS. Front Panel Adapters A typical application is when a 3U x 4 HP EMC plug-in unit is installed into a 6U system. This adapter kit provides for an additional 3U EMC filler front panel to be attached to the top end of the CPCI EMC front panel via a bracket. Part No Note: The top handle is optional. Board Adapters A typical application is when two 3U CPU boards are on top of each other, creating a 6U board system, where the enviroment requires two times P/J-P2/J2 (typically two 3U 32-/64-bit CPCI boards in one slot). This kit provides for an adapter plate (FR4) to connect two CompactPCI boards to the front panel and solder side cover (back cover) mounting holes. A modified 6U front panel is required; please inquire for additional information. Part No Ø2.70 CSK 4 places For assembly use 4xM2.5x6 CSK screws, 4xM2.5 nuts. See assembly parts below. CompactPCI Assembly Parts To fasten Size (mm) Description Packs of Kit No. Horizontal rails to side plates and H/W dividers M4x2 Locking screw Backplanes to horizontal rails M2.5x0 Pozidrive/washer Guide rails to horizontal rails M2.26 Screw for plastic Front/rear panels to subrack M2.5x Screw w/retention Front/rear panels to subrack M2.5x2 Retention screw Front/rear panels to subrack M2.5x2 Retention screw to holder M2.5x8 Pozidrive Board adapter to M2.5x6 Pozidrive CSK Board adapter to M2.5 Nut hexagon

8 For 3 /2 & 5 /4 s & CD-ROMs... 9 VARIO DRIVE CHASSIS. The Ripac range of 9 Vario subracks was designed to house multiple horizontal 3 /2 and/or 5 /4 height drive chassis. The drive chassis are defined on pages and will accept the most popular sizes of hard drives (no cut out), tape drives, floppy disks, CD-ROMs, etc. The purpose of this subrack design is to provide a solution for a multiple drive application in a defined subrack, accepting pluggable 3 /2 drives to be plugged into a (custom) backplane. This subrack is a solution for horizontal mounted drives only. For vertical mounted drives, use any 3U, 4U or 6U Ripac subracks and drive chassis as defined on page 26. Features: Sizes available:, 4U, 6U Plug-in depth: 48.7mm Shock and vibration tested to: IEC (Fc) IEC (Ea) D 48.7 D Backplane position 2 HP 24 HP spare 30 HP For: 4 x 3 /2" Or 2 x 5 /4" Chassis U D Kit No Note: 20mm and 26mm 3 /2" drives can be dual in each 3 /2" drive chassis. 4U 48.7 D 4U For: 8 x 3 /2" Or 4 x 5 /4" Chassis U D Kit No Note: 20mm and 26mm 3 /2" drives can be dual in each 3 /2" drive chassis. 6U 6U For: 2 x 3 /2" Or 6 x 5 /4" Chassis Note: 20mm and 26mm 3 /2" drives can be dual in each 3 /2" drive chassis U D Kit No

9 Type H (Horizontal) Chassis For, 4U And 6U Ripac Vario Chassis Subracks s are H (horizontally) mounted Front removal drive chassis Will accept 5 /4" HH (CD-ROM) or 3 /2" drives 2x20mm and 2x26mm 3/2 drives can be mounted into a single drive chassis Backplane pluggable for 3 /2" drives Inquire for custom backplane designs W 2 HP H M2.5 type thread 3 /2" Chassis With Cut-Out For No. of drives H W Part No Material: aluminum extruded Finish: clear chromated W H 3 /2" Chassis With Cut-Out For 2 s No. of drives H W Part No. 2 (20) (26) HP Dual Brackets With Cut-Outs For 2 s Including Mounting Parts Bracket Kit No. pair W Material: aluminum extruded Finish: clear chromated H 5 /4" HH Or CD-ROM Chassis With Cut-Out For No. of drives H W Part No HP All dimensions are in millimeters (mm) 25

10 Type V (Vertical) Chassis For 3U, 4U And 6U Ripac Subracks EMC design s are V (vertically) mounted Front removal drive chassis Will accept 5 /4" HH (CD-ROM) or 3 /2" drives Suitable for Ripac EMC and Non-EMC subracks Vertical Chassis Support Guides Provide for a rigid support of the drive chassis in the CPCI system. Made of aluminum extrusion and are bolted on the top/bottom, front/rear horizontal rails. Each kit includes two (2) guides and mounting parts suitable for mounting one () vertical drive chassis. Part No: kit Note: For drive backplane designs, please inquire. There are no standard backplanes available. May be included into a custom CPCI backplane or a separate custom backplane. W HP Type V "Vertical" Mounted EMC Chassis Kit Includes: Front panel ( piece) Side plate ( piece) EMC gasket ( piece) Assembly parts Type V " Chassis" are suitable for Ripac Non-EMC and Ripac EMC subracks x 3 /2" x 3 /2" x 5 /4" Front panel Approximate depth Front panel Kit No. cut-out U HP of drive assembly H W x 3 /2" x x x M2.5 type thread x 5 /4" x H EMC Gasket Material: Front panel: Aluminum extruded Finish: Clear chromated Side plate: Sheet aluminum Finish: Clear chromated All dimensions are in millimeters (mm) 26

Pixus Technologies Catalog

Pixus Technologies Catalog The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 96.524.8242 CAN: 59.885.5775 Product Diversity

More information

Pixus Technologies Catalog

Pixus Technologies Catalog The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity

More information

KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)

KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858) KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,

More information

Ripac VME/VME64x Systems. Applications. Design Features

Ripac VME/VME64x Systems. Applications. Design Features Overview Of Systems For VMEbus Ripac VME/VME64x Slim-Box Ripac VME/VME64x Systems Ripac VME/VME64x Systems 1, 2, 3, 4U/2, 4, 6, 8 slot in AC input Order No. see pages 110-112 For backplanes see page 60

More information

Subracks. Subracks, 2U-9U, 19-21HP wide KEY FEATURES INDUSTRIES

Subracks. Subracks, 2U-9U, 19-21HP wide KEY FEATURES INDUSTRIES Subracks KEY FEATURES INDUSTRIES Modular extruded aluminum design For housing custom backplanes and motherboards with front (and/or rear) pluggable modules. (If standard architecture backplane is required,

More information

3: Handles. 3.1 Fluted Handles C 3_ Rigid-Mounted Unit Handles C 3_ Ejector Handles acc. to IEC C 3_4

3: Handles. 3.1 Fluted Handles C 3_ Rigid-Mounted Unit Handles C 3_ Ejector Handles acc. to IEC C 3_4 3.1 Fluted Handles 3_2 3.2 Rigid-Mounted Unit Handles 3_3 3.3 Ejector Handles acc. to IE 3_4 3.4 Injector/Ejector Handles acc. to IEEE 3_6 3.4.1 Ergonomic IEEE Standard Injector/Ejector Handle 3_6 3.4.2

More information

VEROTEC Electronics Packaging

VEROTEC Electronics Packaging VEROTEC Electronics Packaging KM6-HD Subracks Introduction: KM6-HD subracks KM6-HD HEAVY DUTY CARD FRAME Introduction The KM6-HD subrack system, although primarily designed for military use, would suit

More information

VEROTEC Electronics Packaging

VEROTEC Electronics Packaging VEROTEC Electronics Packaging KM6-HD Subracks 1 KM6 Subracks KM6-HD Subracks Value Added Services from Verotec CUSTOM KM6-HD SUBRACKS TecServ is the vehicle by which Verotec delivers its value added services.

More information

2: Front Panels for Plug-In Units

2: Front Panels for Plug-In Units C 2: Front Panels for Plug-In Units 2.1 Plug-In Units acc. to IEC C 2_3 2.1.1 Extruded Front Panel C 2_3 2.1.2 Front Panel with Cutout for IEC Ejector Handle C 2_5 2.2 EMC Plug-In Units acc. to IEC C 2_6

More information

SUBRACKS. A minimum of components a multitude of applications

SUBRACKS. A minimum of components a multitude of applications SURCKS minimum of components a multitude of applications SURCKS he modular concept of Ripac subracks facilitates a wide range of application options with a minimum of components. ll Ripac subracks are

More information

cpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies

cpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies cpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies IEEE 1101.10 and PICMG 2.0 Compliant Compact size and unique aesthetics Innovative positive locking, simple push button

More information

Pixus Technologies Catalog

Pixus Technologies Catalog The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 916.524.8242 CAN: 519.885.5775 Order Information

More information

Front Panels, Handles and Plug-in Units

Front Panels, Handles and Plug-in Units Front Panels, Handles and Plug-in Units Chapter Overview 1. Front Panels for Sub Racks and Enclosures Flat front panels EMC flat front panels Fan front panels Hinged front panels 2. Front Panels for Plug-In

More information

Pixus Technologies Catalog

Pixus Technologies Catalog The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 916.524.8242 CN: 519.885.5775 Contents Kaparel/Rittal

More information

100% RoHS compliant Front Panels, Handles & Accessories

100% RoHS compliant Front Panels, Handles & Accessories 100% RoHS compliant Enclosures & Components Comprehensive range of products and services for board manufacturers Front Panels, Handles & Accessories Enclosures & Components Backplanes System Platforms

More information

Europacpro Industrial Applications

Europacpro Industrial Applications Europacpro Industrial Applications for industrial applicationsdmain Catalogue Subracks EuropacPRO for Industrial Applications OVERVIEW MAIN KATALOG Cabinets....... 1 Wall mounted cases......... 2 Accessories

More information

Ejector Handles, Front Panels & Accessories. cpci, VME/64, VPX, VXS. Elma Electronic

Ejector Handles, Front Panels & Accessories. cpci, VME/64, VPX, VXS. Elma Electronic Ejector Handles, Front Panels & Accessories cpci, VME/64, VPX, VXS Elma Electronic Front Panels and EMC Springs Front Panels for Handles or Card Holders Panels for Use With Continuous EMC Gasket Grained,

More information

Installing the Cisco ADE 2130 and 2140 Series Appliance Hardware Options

Installing the Cisco ADE 2130 and 2140 Series Appliance Hardware Options CHAPTER 4 Installing the Cisco ADE 2130 and 2140 Series Appliance Hardware Options This chapter provides instructions for installing, replacing, and removing various hardware options in your Cisco ADE

More information

07. har-link INTERFACE CONNECTORS

07. har-link INTERFACE CONNECTORS . INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism

More information

Description of parts Panel mounting Insert mounting without/with Carrier element Plastic housings

Description of parts Panel mounting Insert mounting without/with Carrier element Plastic housings - Contents Page Features -... 11.02 Component range -... 11.03 Description of parts... 11.04 Latching parts without/with Strain relief and Panel mounting parts... 11.06 Panel mounting... 11.08 Insert mounting

More information

TopConsole system TP. Combination options 1-part 2-part 3-part. System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389

TopConsole system TP. Combination options 1-part 2-part 3-part. System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389 opconsole system P System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389 Enclosure: Sheet steel 1.5 mm Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in

More information

07. har-link Interface Connectors

07. har-link Interface Connectors . Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism

More information

FOR PC BOARD TO FLAT CABLE

FOR PC BOARD TO FLAT CABLE AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right

More information

Probably the fastest enclosure in the world

Probably the fastest enclosure in the world 95 9 enclosure system Probably the fastest enclosure in the world Sample configuration tools required no no tools required Vitaro can be assembled within less than 60 seconds. 00:00 00:0 00:08 00: 00:5

More information

Vandal-proof latching action switch MSM LA

Vandal-proof latching action switch MSM LA Product Manual Vandal-proof latching action switch MSM LA CONTENTS 1 PRODUCT DESCRIPTION... 2 2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS... 2 2.1 Technical Data... 2 2.2 Dimensional Drawings... 5 2.3 Hole

More information

CA2-FUNK CompactPCI to PCI Adapter

CA2-FUNK CompactPCI to PCI Adapter CA2-FUNK CompactPCI to PCI Adapter As an industrial standard, the CompactPCI bus is a modular solution for configuring industrial grade PC systems. Todays market is offering a broad variety of CPCI I/O

More information

ERNIPRESS Trapezoidal-Connectors Series TMC

ERNIPRESS Trapezoidal-Connectors Series TMC ERNIPRESS Trapezoidal-Connectors Series TMC Subminiatur-D Connectors to DIN 41 652/IEC 807-3 with Press-fit zone General Solderless press-in technology for connectors in bus systems permits rationalized

More information

Switches and Indicators 84

Switches and Indicators 84 Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories

More information

IT power distribution Power distribution units (PDU) Basic. Versions available:

IT power distribution Power distribution units (PDU) Basic. Versions available: IT PDU Basic 1 U With its IT PDU Basic 1 U, BACHMANN provides a huge choice of PDUs in a high-quality aluminium profile. With their extremely compact size of just 1 height unit, mm in depth and 1" in width,

More information

Vertiv VR Rack 1.0 GENERAL

Vertiv VR Rack 1.0 GENERAL 1.1 SUMMARY Vertiv VR Rack Guide Specifications 1.0 GENERAL This specification defines the mechanical characteristics and requirements for the Vertiv VR Rack. A series of adaptive and scalable electronic

More information

CPCI System Subrack 1 U

CPCI System Subrack 1 U User s Manual Product No.: Doc-No: 63972-165_R1.0 January 14, 2008 Rev. Date updated Change R1.0 January 14, 2008 Initial Release Impressum: Schroff GmbH D-75334 Straubenhardt, Germany The details in this

More information

CompactPCI Power Backplanes , , ,

CompactPCI Power Backplanes , , , Users guide CompactPCI Power Backplanes 23098-393, 23098-394, 23098-395, 23098-396 PICMG 2.11 defines the mechanical and electrical interface for pluggable power supplies in 3U or 6U height for powering

More information

Model 720 Electromechanical Hour Meter

Model 720 Electromechanical Hour Meter Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models

More information

vme, vme64x, vxs, vpx

vme, vme64x, vxs, vpx vme, vme4x, vxs, vpx VME, VME4x, VXS, VPXMain Catalogue Systems VME, VME4x, VXS, VPX OVERVIEW MAIN KATALOG Cabinets....... 1 Wall mounted cases.......... 2 for cabinets and wall mounted cases.. 3 Climate

More information

Sensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.

Sensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52. Retroreflectors Sensor Accessory AC Sensor Tester/Demonstrator Pilot Device E65 Control Unit.1 Retroreflectors and Retroreflective Tape Product............................................. 414 Application..........................................

More information

This Datasheet for the IC697CHS790. Rack, 9 Slots, Rear Mount.

This Datasheet for the IC697CHS790. Rack, 9 Slots, Rear Mount. This Datasheet for the IC697CHS790 Rack, 9 Slots, Rear Mount. http://www.cimtecautomation.com/parts/p-14771-ic697chs790.aspx Provides the wiring diagrams and installation guidelines for this GE Series

More information

modular enclosure MUREVA, IP65 weatherproof & versatile enclosures aesthetics multi-functional evolutionary ergonomics and time saving security

modular enclosure MUREVA, IP65 weatherproof & versatile enclosures aesthetics multi-functional evolutionary ergonomics and time saving security aesthetics c Elegant and robust design. c Colour easy to integrate in any environment. weatherproof & versatile enclosures multi-functional c Different solutions for: industrial control, electrical distribution,

More information

1993 Specifications CSJ SPECIAL SPECIFICATION ITEM Transportation Management Console

1993 Specifications CSJ SPECIAL SPECIFICATION ITEM Transportation Management Console 1993 Specifications CSJ 0598-01-057 1.0 Description SPECIAL SPECIFICATION ITEM 6398 Transportation Management Console This Item shall govern for the furnishing and installation of Transportation Management

More information

Preset counters, electromechanical

Preset counters, electromechanical The electromechanical preset counters (with manual reset) boast a robust construction. They are ideal for use in harsh industrial environments as stand-alone counters or as plugin variants in combination

More information

Elma Bustronic CompactPCI Reference Sheet

Elma Bustronic CompactPCI Reference Sheet Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma

More information

US FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.

US FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18. ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5

More information

Special-Purpose Proximity Sensor E2C

Special-Purpose Proximity Sensor E2C Special-Purpose Proximity Sensor E2C Cylindrical Inductive Sensors with Separate Amplifiers Provide Variable Detecting Capabilities Separate amplifier allows sensor to fit in space-confined sites, providing

More information

Thermal-Magnetic Circuit Breaker 2216-S

Thermal-Magnetic Circuit Breaker 2216-S Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional

More information

ME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description

ME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description Multifunctional housing for complex electronics Data sheet 105504_en_01 PHOENIX CONTACT 2013-04-08 1 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with

More information

Modules Front panels OVERVIEW MAIN KATALOG STANDARDS

Modules Front panels OVERVIEW MAIN KATALOG STANDARDS Front Panels Main Catalogue Modules OVERVIEW MAIN KATALOG Cabinets....... 1 Wall mounted cases......... 2 Accessories for cabinets and wall mounted cases.. Climate control.. 4 Electronics cases.........

More information

CPCI System Subrack 3 U

CPCI System Subrack 3 U User s Manual Product No.: Doc-No: 63972-227_R1.1 April 18, 2011 Rev. Date updated Change R1.0 January 14, 2008 Initial Release R1.1 April 18, 2011 Fan Tray with mini compression latch Impressum: Schroff

More information

ML200 Fanless Mini-ITX Enclosure

ML200 Fanless Mini-ITX Enclosure ML200 Fanless Mini-ITX Enclosure Assembly Guide Version 1.1 PN: ML200 1 Table of Contents I. Product Description... 3 II. Included Parts... 3 III. Basic Chassis Assembly... 5 IV. Installation... 12...

More information

Insulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals

Insulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals Insulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals Technical Data Type: KS 4401 KS 4402 KS 4403 KS 4461 KS 4404 KS 440 KS 4406 Article number * ) : 00636 00637 0063987 00614

More information

Oracle <Insert Picture Here>

Oracle <Insert Picture Here> Slide 1 Oracle Slide 2 WZT-6509 version B Sun Fire Nehalem and Westmere Rack-Mount Server Installation and Replacement Welcome to the installation and replacement

More information

Terminal Junction System (MIL-T and Commercial)

Terminal Junction System (MIL-T and Commercial) Introduction Product Facts The TJS connections are inherently more reliable than conventional threaded and solder terminations. The user s wiring is crimped to gold plated pin contacts, conforming the

More information

MIC-3001/8. 3U/4U CompactPCI. Enclosure for Rackmounting

MIC-3001/8. 3U/4U CompactPCI. Enclosure for Rackmounting MIC-3001/8 3U/4U CompactPCI Enclosure for Rackmounting Copyright Notice This document is copyrighted, 1999. All rights are reserved. The original manufacturer reserves the right to make improvements to

More information

EMC 10T "CE" Mechanical Upgrade Procedure

EMC 10T CE Mechanical Upgrade Procedure EMC 10T "CE" Mechanical Upgrade Procedure Kit Part Number: 009866-01 This procedure upgrades a non-ce compliant machine to the mechanical requirements of a CE compliant machine. Properly upgraded machines

More information

1 Airflow via normal convection or forced-air cooling devices in the enclosure or housing outside of the subrack.

1 Airflow via normal convection or forced-air cooling devices in the enclosure or housing outside of the subrack. T Accessories n Subrack Cooling n Vertical Cooling From Bottom To Top D 1 Airflow via normal convection or forced-air cooling devices in the enclosure or housing outside of the subrack. 2 Vertical forced

More information

Knurr Miracel Server Rack

Knurr Miracel Server Rack Knurr Miracel Server Rack Knurr Server Racks are featured in these Scenarios: Scenario A 1-2 Rack page 8 Scenario C 3-6 Racks page 12 Scenario D 7-10 Racks page 14 Scenario E 10-30 Racks page 16 Scenario

More information

P160 User s Manual Manuel de l utilisateur Anwenderhandbuch Manuale per l operatore Manual del usuario

P160 User s Manual Manuel de l utilisateur Anwenderhandbuch Manuale per l operatore Manual del usuario P10 User s Manual Manuel de l utilisateur Anwenderhandbuch Manuale per l operatore Manual del usuario At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible

More information

Single action door patch fittings

Single action door patch fittings Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame

More information

Ideal protection for your electrics: häwa cable ducts

Ideal protection for your electrics: häwa cable ducts Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in

More information

CPCI System Subrack 3 U

CPCI System Subrack 3 U User s Manual Product No.: Doc-No: 63972-224_R1.1 April 18, 2011 Rev. Date updated Change R1.0 January 14, 2008 Initial Release R1.1 April 18, 2011 Fan Tray with mini compression latch Impressum: Schroff

More information

A-100G6 - Basic frame assembly diagram

A-100G6 - Basic frame assembly diagram doepfer System A - 100 Rack system A-100 G A-100G6 - Basic frame assembly diagram Parts: 1 Rail with lip, and with tapped hole strip inserted (with M3 threads). 2 Rail with lip, with three M3 hexagon nuts

More information

Pulse counters, electromechanical

Pulse counters, electromechanical B 6 / B 8 The standard totalizers B 6 (with manual reset) and B 6, B 8 (without reset) offer a robust construction. They are ideal for use in harsh industrial environments as individual counters or as

More information

07. har-link Interface Connectors

07. har-link Interface Connectors . Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism

More information

CompactPCI PowerConnector

CompactPCI PowerConnector CompactPCI PowerConnector Table of Contents 1 Introduction............................................................. 2 Product Features......................................................... 3 Performance

More information

MIC-3001/8. 3U/4U CompactPCI Enclosure for Rack Mounting. User Manual

MIC-3001/8. 3U/4U CompactPCI Enclosure for Rack Mounting. User Manual MIC-3001/8 3U/4U CompactPCI Enclosure for Rack Mounting User Manual Copyright The documentation and the software included with this product are copyrighted 2004 by Advantech Co., Ltd. All rights are reserved.

More information

RACKS AND CABLE MANAGEMENT

RACKS AND CABLE MANAGEMENT F/ F/ Assemblies, 11.0 W W W. S I E M O N. C O M SECTION CONTENTS RS3 Rack System........ 11.2 11.3 RS3 Series Horizontal Managers........... 11.3 F/ RS Rack System............................. 11.4 Extended

More information

STORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.

STORAGE.   WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle. STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool

More information

Right angle press-fit D-Sub connectors

Right angle press-fit D-Sub connectors Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN

More information

C.M-IDE-421.HS. User s Manual. Introduction. Specification

C.M-IDE-421.HS. User s Manual. Introduction. Specification C.M-IDE-421.HS User s Manual Introduction The C.M.-IDE-421.HS is an IDE interface card drive in one inch height that allows computers with an IDE controller read and write PCMCIA ATA Flash & Compact Flash

More information

AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]

AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35] MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page

More information

3+1 U CPCI Serial System

3+1 U CPCI Serial System 3+ U CPCI Serial System User s Manual Product Number: 4579-46/47/48/49/40/4/4/43/44 Doc-No: 6397-349_R.0 January 06 R.0 January 06 Initial Release Impressum: Schroff GmbH Langenalber Str. 96-00 75334 Straubenhardt,

More information

GV-EL124S Electric Strike

GV-EL124S Electric Strike GV-EL124S Electric Strike Featured with a built-in door status sensor, the GV-EL124S is a fail-secure electric strike, but it is field convertible from fail secure to fail safe. It can be mounted either

More information

CA2-FUNK CompactPCI to PCI Adapter

CA2-FUNK CompactPCI to PCI Adapter Product Information CA2-FUNK CompactPCI to PCI Adapter Document Nr. 2199 Edition 2006-02 As an industrial standard, the CompactPCI bus is a modular solution for configuring industrial grade PC systems.

More information

User's Manual CPCI Basic 3U, 30HP CPCI Basic 3,5U, 42HP

User's Manual CPCI Basic 3U, 30HP CPCI Basic 3,5U, 42HP User's Manual CPCI Basic 3U, 30HP CPCI Basic 3,5U, 42HP www.hartmann-elektronik.de Rev. 1.2 Rev: R 1.0 26.05.2010 Borutta R 1.1 12.08.2010 Friedrich R 1.2 09.08.2011 F. Minich Impressum: Hartmann Elektronik

More information

OZLINX Solutions Australia Pty Ltd 21 Ayton Street, Sunshine North, Melbourne VIC3020 Australia Ph: Fax:

OZLINX Solutions Australia Pty Ltd 21 Ayton Street, Sunshine North, Melbourne VIC3020 Australia Ph: Fax: OZLINX Solutions Australia Pty Ltd 21 Ayton Street, Sunshine North, Melbourne VIC3020 Australia Ph: +61 3 93102440 Fax: +61 3 93102441 www.ozlinx.com OZLINX Cabinets OZLINX Cabinets OZLINX cabinets combine

More information

XL 4000 metal free-standing enclosures and cable compartments

XL 4000 metal free-standing enclosures and cable compartments 87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL metal free-standing enclosures and CONTENTS PAGE 1. General characteristics...1 2. Range...2 3. Overall dimensions...2 4. Equipment...3

More information

NRG 19" ENCLOSURE SYSTEM. These enclosures have the most possible height and width for 19" enclosures available on the market.

NRG 19 ENCLOSURE SYSTEM. These enclosures have the most possible height and width for 19 enclosures available on the market. NRG 19" ENCLOSURE SYSTEM No heat problems!...because the ventilation holes are at the SIDE of the enclosure, where they should be More space for your stuff! These enclosures have the most possible height

More information

Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch

Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................

More information

RittalXpress TS IT Enclosure Assemble-to-Order Program

RittalXpress TS IT Enclosure Assemble-to-Order Program RittalXpress TS IT Enclosure Assemble-to-Order Program DESIGN YOUR DATA CENTER BY THE NUMBERS. Count down to success: 4, 3, 2, 1... Complete four easy steps, your order can be shipped in three days and

More information

FPC connectors (0.2mm pitch) Back lock

FPC connectors (0.2mm pitch) Back lock 0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with

More information

High-density multi-pin connectors

High-density multi-pin connectors High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there

More information

Removal and Installation8

Removal and Installation8 8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever

More information

Argenta W A L L M O U N T I N G M E T A L C A B I N E T S

Argenta W A L L M O U N T I N G M E T A L C A B I N E T S Argenta W A L L M O U N T I N G M E T A L C A B I N E T S The ARGENTA Series is a group of metal enclosures used to house on the inside electrical or electronic switchgear, controlgear and equipment necessary

More information

PROLINE. Wall mounted cases FOR ROBUST INDUSTRIAL ENVIRONMENTS UP TO IP 66. Epcase OVERVIEW MAIN KATALOG

PROLINE. Wall mounted cases FOR ROBUST INDUSTRIAL ENVIRONMENTS UP TO IP 66. Epcase OVERVIEW MAIN KATALOG Wall Mounted Case PROLINE Main Catalogue Wall mounted cases OVERVIEW FOR ROBUST INDUSTRIAL ENVIRONMENTS UP TO IP 66 MAIN KATALOG Cabinets....... 1 Wall mounted cases......... 2 Accessories for cabinets

More information

RUGGED MILITARY GRADE

RUGGED MILITARY GRADE R4U-20A RUGGED MILITARY GRADE COTS Plus 4U ENCLOSURE Optimized for High Shock / Vibration Environments C6CHASSIS SYSTEMS ENGINEERED TO PERFORM The R4U-20A is designed to survive! Aircraft grade aluminum

More information

REMOTE HEAD ADAPTER INSTALLATION GUIDE

REMOTE HEAD ADAPTER INSTALLATION GUIDE REMOTE HEAD ADAPTER INSTALLATION GUIDE The Remote Head adapter is a valuable accessory for the Uniden BC-780, 785 and 796 scanners. It allows the scanner's control panel to be removed from the radio and

More information

Cat.8 Shielded Field Termination Plug Description

Cat.8 Shielded Field Termination Plug Description Description RiT s CAT8 Shielded field termination plug are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations.

More information

Insulated Enclosure KU 4090 to DIN for installation in distribution cabinets or surface mounting

Insulated Enclosure KU 4090 to DIN for installation in distribution cabinets or surface mounting Insulated Enclosure KU 4090 to DIN 43 880 for installation in distribution cabinets or surface mounting Width 105 mm Uo to 48 plus-minus-terminal screws with self raising terminal washers. Part insertion

More information

FISCHER MINIMAX TM SERIES

FISCHER MINIMAX TM SERIES TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases

More information

Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module

Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han

More information

Summary of shell housings and accessories Shell housing A Shell housing D EMC housing

Summary of shell housings and accessories Shell housing A Shell housing D EMC housing Directory chapter 20 Page Summary of shell and accessories........................... 20.02 housing C.......................... 20.04 housing A................................................. 20.08 housing

More information

7415 x. Made in Germany. fluid sensors and diagnostic systems. position sensors and object recognition bus, identification and control systems

7415 x. Made in Germany. fluid sensors and diagnostic systems. position sensors and object recognition bus, identification and control systems 7 x Made in Germany 00 fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control systems Easy adjustment and parameter setting. Clear CD display with

More information

KM-4800w. Installation Guide

KM-4800w. Installation Guide KM-4800w Installation Guide TABLE OF CONTENTS page 1 Installation Requirements 2 2 Unpacking 3 2. 1 Unpacking 3 2. 2 Confirmation of Accessories 5 3 Leveling the Machine 7 4 Setup of the Roll Deck 9 5

More information

Interlock Switches. Selection Guide. HS7A-DMC Magnetic Safety Switches

Interlock Switches. Selection Guide. HS7A-DMC Magnetic Safety Switches HSA-DMC Magnetic Safety Switches Key features: Compact size and easy positioning. Combination with proprietary relay modules achieves safety category 4 (EN954-1). Compact size ( 16 51mm) Positioning for

More information

Knürr Elicon Ergonomic, modular, future-proof Cost-optimized installation options. Technical Furniture

Knürr Elicon Ergonomic, modular, future-proof Cost-optimized installation options. Technical Furniture Knürr Elicon Ergonomic, modular, future-proof Cost-optimized installation options Technical Furniture Knürr Elicon Applications Capabilities 2 Knürr Elicon Strong points 4 Knürr Elicon Modules Side Panel

More information

PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.

PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials. Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction

More information

Product Information. CA2-FUNK CompactPCI to PCI Adapter. Document Nr April 2014

Product Information. CA2-FUNK CompactPCI to PCI Adapter. Document Nr April 2014 Product Information CA2-FUNK CompactPCI to PCI Adapter Document Nr. 2199 25 April 2014 As an industrial standard, CompactPCI is a modular solution for configuring industrial grade PC systems. The CA2-FUNK

More information

Robust Clamps Shock-proof load range

Robust Clamps Shock-proof load range Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific

More information

PLC Racks IC697CHS782/783

PLC Racks IC697CHS782/783 5 1 PLC Racks IC697CHS782/783 (IC697CHS782/783) datasheet Features Accepts 3rd Party VME modules which require 0.8 spacing. Accepts all IC697 PLC module types. Rear mount rack mounts in a 10 (254 mm) deep

More information

G12/G12x USER S MANUAL

G12/G12x USER S MANUAL G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5

More information

PHOENIX CONTACT - 01/2008

PHOENIX CONTACT - 01/2008 Ex Basic Terminal Blocks for Intrinsically Safe Signals With Knife Disconnection and Test Connections INTERFACE Data Sheet 102957_00_en PHOENIX CONTACT - 01/2008 1 Description PI-EX-TB and PI-EX-TB/T Ex

More information

Chapter 4 Replacement Procedures

Chapter 4 Replacement Procedures Chapter 4 Replacement Procedures 4 4-ii Satellite P30 Series Maintenance Manual Chapter 4 Contents 4.1 General... 4-1 4.2 Battery... 4-7 4.3 PC Card... 4-8 4.4 HDD... 4-10 4.5 Optical Drive Module... 4-12

More information