SIMADYN D Digital Control System. Expansion Module IT41. User Manual. Edition DK No

Size: px
Start display at page:

Download "SIMADYN D Digital Control System. Expansion Module IT41. User Manual. Edition DK No"

Transcription

1 SIMADYN D Digital Control System User Manual Expansion Module IT41 Edition DK No

2 User Manual, Expansion Module IT41 Edition Status 1 Expansion Module IT Expansion Module IT Copying of this document and giving it to others and the use or communication of the contents thereof is forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. We have checked the contents of this Manual to ensure that they coincide with the described hardware and software. However, deviations cannot be completely ruled-out, so we cannot guarantee complete conformance. However, the information in this document is regularly checked and the necessary corrections included in subsequent editions. We are thankful for any recommendations or suggestions.

3 Inhalt Contents Warning information Ordering information Function description General information Board design Important application information Technical data General information Power supply Current drain Binary inputs (connector X7) Binary outputs (connector X7) Analog outputs (connector X6) Analog inputs (connector X7) Speed sensing inputs (connector X6) V three-phase encoder with/without zero pulse V 3-phase and 5V 2-phase encoder (without zero pulse) Monitoring inputs, pulse encoder V 3-phase encoder with/without zero pulse V 3-phase encoder and 5 V 2-phase encoder (alarm inputs) Alarm reset outputs Power supply connection for pulse encoders Connector assignments Connector X Connector X Struc mask, IT Supplementary components (optional) Interface modules Cable sets Others Attachments Block diagram Dimension drawing Layout diagram ESD instructions Siemens AG Dk No Edition 04.97

4 Warning information Edition Siemens AG Dk No

5 Warning information N O T E! The information in this Manual does not purport to cover all details or variations in equipment, nor to provide for every possible contingency to be met in connection with installation, operation or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser s purposes, please contact your local Siemens office. Further, the contents of this Manual shall not become a part of or modify any prior or existing agreement, committment or relationship. The sales contract contains the entire obligation of Siemens. The warranty contained in the contract between the parties is the sole warranty of Siemens. Any statements contained herein do not create new warranties nor modify the existing warranty.. Warning information W A R N I N G! Electrical equipment has components which are at dangerous voltage levels. If these instructions are not strictly adhered to, this can result in severe bodily injury and material damage. Only appropriately qualified personnel may work on this equipment or in its vicinity. This personnel must be completely knowledgeable about all the warnings and service measures according to this User Manual. The successful and safe operation of this equipment is dependent on proper handling, installation, operation and maintenance. Siemens AG Dk No Edition

6 Warning information Definitions * QUALIFIED PERSONNEL For the purpose of this User Manual and product labels, a Qualified person is someone who is familiar with the installation, mounting, start-up and operation of the equipment and the hazards involved. He or she must have the following qualifications: 1. Trained and authorized to energize, de-energize, clear, ground and tag circuits and equipment in accordance with established safety procedures. 2. Trained in the proper care and use of protective equipment in accordance with established safety procedures. 3. Trained in rendering first aid. * DANGER For the purpose of this User Manual and product labels, Danger indicates death, severe personal injury and/or substantial property damage will result if proper precautions are not taken. * WARNING For the purpose of this User Manual and product labels, Warning indicates death, severe personal injury or property damage can result if proper precautions are not taken. * CAUTION For the purpose of this User Manual and product labels, Caution indicates that minor personal injury or material damage can result if proper precautions are not taken. * NOTE For the purpose of this User Manual, Note indicates information about the product or the respective part of the User Manual which is essential to highlight. C A U T I O N! This board contains components which can be destroyed by electrostatic discharge. Prior to touching any electronics board, your body must be electrically discharged. This can be simply done by touching a conductive, grounded object immediately beforehand (e.g. bare metal cabinet components, socket protective conductor contact). W A R N I N G! Hazardous voltages are present in this electrical equipment during operation. Non-observance of the safety instructions can result in severe personal injury or property damage. It is especially important that the warning information in all of the relevant Operating Instructions are strictly observed. 2 Edition Siemens AG Dk No

7 Ordering information 1. Ordering information IT41: 6DD AC0 2. Function description 2.1. General information The IT41 expansion module is used in the SIMADYN D system to process general technological open-loop and closed-loop tasks, such as, for example, closed-loop speed or position controls. The IT41 expansion module is plugged-onto the PM4 basic processor board using a 96-pin plug connector. The expansion module power supply is realized through the basic processor board. If required, one additional IT41 or IT42 expansion module can be plugged-onto the IT41 expansion module. In addition to the analog and binary inputs/outputs, the IT41 has 4 pulse encoder inputs for closedloop speed or position controls, which can either be configured for 3-phase encoders (incremental encoder with 2 tracks displaced through 90, with/without zero pulse), or 2-phase encoders (incremental encoder, one track for the forwards- and track for the reverse pulses). All of the input/output signal conductors are not directly connected to the expansion module, but are indirectly connected through the interface modules. The interface modules are used as a mechanical connecting element and also to electrically adapt the incoming plant signals. Siemens AG Dk No Edition

8 Function description IT41 expansion module, periphery 50-pin, sub-d X6 50-pin, sub-d X7 Product release label, IT41 File : IT41_P1.DRW Fig.1: Front view of the IT41 4 Edition Siemens AG Dk No

9 Board design 3. Board design The IT41 expansion board has the following features * 2 front panel connectors X6 and X7 for the input and output signals * Board identification code * 4 analog inputs 12 bit resolution, typical 10-bit absolute accuracy over the complete temperature range * 4 analog outputs 16 bit resolution, 14-bit monotone, typical 13-bit absolute accuracy over the complete temperature range * 16 binary inputs * 16 binary outputs with P24 connection for an external supply * 4 pulse sensing inputs (for determining speed and position), floating using two internal board connectors per channel (X100,X101 to X400,X401), eachchannel can either be configured for 15 V 3-phase encoders, or for 5 V 3-phase encoders and 5 V 2-phase encoders (e.g. SONY encoder, type HA 705 LK / MSD 560). * 4 monitoring inputs for 15 V three-phase encoders * 4 interrupt inputs for 5 V 2/3 phase encoders (e.g. SONY encoder, type HA 705 LK / MSD 560) This should not be confused with the alarm inputs (connector X5) of the basic processor board PM4! * 4 outputs to reset the 5 V 2/3 phase encoder alarm signals Siemens AG Dk No Edition

10 Important application information 4. Important application information The subracks must be equipped with bus terminating modules or buffer memory boards. The expansion module can only be used with the PM4. The basic processor board and expansion board each occupy 1 slot. The board must be tightly screwed into the subrack to ensure perfect operation (also during start-up). If the board is inserted in an adapter for testing, the front panel must be connected to the housing through a short conductor. It is not permissible to insert or withdraw the board when the subrack is powered-up. All inputs and outputs are connected to the plant-side signal cables via appropriate interface modules (refer to Section...). Please observe the orientation of the coding plug (refer to Fig. 2)! The coding plug is assigned to the pulse encoder channels as follows : X100,X101 - Pulse encoder channel 1 X200,X201 - " 2 X300,X301 - " 3 X400,X401 - " 4 Depending on the coding plug orientation, either select the 15 V 3-phase encoder or 5 V 2-phase encoder (e.g. SONY encoder). The board is always set for a 15 V 3-phase encoder. Caution: Incorrectly inserted coding plugs can cause the inputs to be destroyed when pulses are fed-in! 6 Edition Siemens AG Dk No

11 Important application information X100 X200 X101 X201 Configured for 5 V encoder (e.g. SONY) X6 X300 X301 Configured for 15 V encoder. X400 X401 X7 (Component side, IT41). Fig. 2 File : IT41_P1.DRW Siemens AG Dk No Edition

12 Technical data 5.Technical data 5.1. General information Insulation group A acc. to VDE 0110, Para. 13, Group 2 at 24 V DC, 15 V DC, 5 V DC Ambient temperature 0 to +55 degrees C and fan operation Storage temperature -40 to +70 degrees C Humidity rating F acc. to DIN Altitude rating S acc. to DIN Mechanical stressing Installation in stationary but not necessarily vibration-free equipment Packaging system ES 902 C Dimensions mm * 220 mm Board width 1 slot = mm Weight 475g 5.2. Power supply Rated voltage Minimum Maximum Polarity Fusing reversal protection +5 V V V no no +15 V V V no no -15 V V V no no 5.3. Current drain Voltage Typical current drain +5 V 420 ma +15 V 450 ma (+ encoder loading) -15 V 175 ma 24 V (external) 100 ma (+ loading of the binary outputs) 8 Edition Siemens AG Dk No

13 Technical data 5.4. Binary inputs (connector X7) No. 16 non-floating (connector X7) 4 non-floating, interrupt-capable (connector X5) Input voltage +24 V nominal for a 0 signal -1 V to +6 V or open binary inputs for a 1 signal +13 V to +33 V Input current for a 0 signal 0 ma for a 1 signal 3 ma typ. Delay time 50 µsec 5.5. Binary outputs (connector X7) No. 16, non-floating Supply voltage external -nominal value 24 V DC -permissible range +20 V to 30 V incl. ripple -briefly +35 V, max. 0.5 sec Output current for a 1 signal -nominal current 50 ma -permissible range up to 50 ma Short-circuit protection electronic (thermal) Limiting inductive switch-off voltages Supply voltage + 1 V Total load 80 % at 50 degrees C, all outputs, 50 ma Residual current 20 µa at 0 signal Signal level -for a 0 signal max. 3 V -for a 1 signal V supply voltage Switching delay max. 15 µs 5.6. Analog outputs (connector X6) No. 4 Design output with associated ground, non-floating Output voltage range -10 V to +10 V Output current +/- 10 ma Resolution 16 bit Monotony 14 bit over the complete temperature range Absolute accuracy typ. 13 bits over the complete temperature range Short-circuit prot. to ground yes 5.7. Analog inputs (connector X7) No. 4 Design differential inputs, non-floating; Input voltage range -10 V +/- 4 LSB to +10 V +/- 4 LSB (1 LSB = 4.88 mv) Input resistance 470 kohm Input filter -3 db transition frequency: 1.5 khz Resolution 12 bit Absolute accuracy typ. 10 bits over the complete temperature range Max. conversion time 45 µsec Siemens AG Dk No Edition

14 Technical data 5.8. Speed sensing inputs (connector X6) V three-phase encoder with/without zero pulse No. of encoders max. 4 Design differential inputs, floating; Internal current limiting approx. 15 ma (electronic) Track signals A, B and zero pulse track N Tracks A and B phase-shifted through 90 degrees Pulse frequency max. 1 MHz (track frequency) Phase diff.of the track signals independent of the pulse frequency, min. 200 nsec Input signal level -for a 0 signal -30 V to +4 V (for 15 ma load) -for a 1 signal +8 V to + 30 V (for 15 ma load) Permissible input voltage range -30 V to +30 V differential voltage Fault pulse suppression per software, can be configured Note : The pulse encoders used must be able to output voltages in the above specified ranges with an approx. 15 ma loading V 3-phase and 5V 2-phase encoder (without zero pulse) No. of encoders max. 4 Design differential inputs, floating; Perm. input voltage range differential voltage, -5 V to +5 V Max. input current 15 ma (caution, is not limited by the board!) Input voltage -for a 0 signal -5 V to 0 V -for a 1 signal +3 V to +5 V Input circuit Series resistor + optocoupler, in parallel, a dynamic termination; Input resistance -steady-state 180 Ohm -dynamic 100 Ohm (corr. to the line impedance of a twisted-pair cable) Note : It is possible to directly connect a SONY encoder, HA 705 LK / MSD Edition Siemens AG Dk No

15 Technical data Monitoring inputs, pulse encoder V 3-phase encoder with/without zero pulse No. 4 Design as for the binary inputs, refer to V 3-phase encoder and 5 V 2-phase encoder (alarm inputs) No. 4 Design non-floating Perm. input voltage range 0 V to +5 V Input voltage -for a 0 signal < 1.4 V -for a 1 signal > 2.0 V Input current -for a 0 signal min. -5 ma, max. -3,6 ma -for a 1 signal min. -3 ma, max. 0 ma Note : It is possible to directly connect a SONY encoder - HA 705 LK / MSD Alarm reset outputs No. 4 Design non-floating Output voltage 15 V via 1 kohm output resistor Output voltage for 10 ma load 5 V Note : A SONY encoder HA 705 LK / MSD-560 can be directly connected Power supply connection for pulse encoders Output voltage Max. output current Design approx. 14 V 100 ma non-floating, electronic short- and overload protection Siemens AG Dk No Edition

16 Connector assignments 6. Connector assignments 6.1. Connector X6 50-pin sub-d, pulse inputs, analog outputs Pin No. Significance Connector 1 Incremental encoder 1, track A+ / SONY encoder 1 V+ X6A 34 " " A- / " " V- X6A 18 " " B+ / " " R+ X6A 2 " " B- / " " R- X6A 35 " " N+ X6A 19 " " N- X6A 3 Incremental encoder 2, track A+ / SONY encoder 2 V+ X6B 36 " " A- / " " V- X6B 20 " " B+ / " " R+ X6B 4 " " B- / " " R- X6B 37 " " N+ X6B 21 " " N- X6B 5 Incremental encoder 3, track A+ / SONY encoder 3 V+ X6C 38 " " A- / " " V- X6C 22 " " B+ / " " R+ X6C 6 " " B- / " " R- X6C 39 " " N+ X6C 23 " " N- X6C 7 Incremental encoder 4, track A+ / SONY encoder 4 V+ X6D 40 " " A- / " " V- X6D 24 " " B+ / " " R+ X6D 8 " " B- / " " R- X6D 41 " " N+ X6D 25 " " N- X6D 9 (15V encoder power supply) 42 Ground, encoder 26 Ground, encoder 10 Monitoring input 1 (for incremental encoder) X6A 43 " 2 " X6B 27 " 3 " X6C 11 " 4 " X6D 44 Interrupt input 1 (for SONY encoder) X6A 28 " 2 " X6B 12 " 3 " X6C 45 " 4 " X6D 29 Interrupt output 1 (or SONY encoder) X6A 13 " 2 " X6B 46 " 3 " X6C 30 " 4 " X6D 14 Alarm ground (for SONY encoder) 47 Ground, D/A converter 31 " " " " 15 Analog output 1+ X6E 48 " 1- X6E 32 " 2+ X6F 16 " 2- X6F 49 " 3+ X6G 33 " 3- X6G 17 " 4+ X6H 50 " 4- X6H 12 Edition Siemens AG Dk No

17 Connector assignments 6.2. Connector X7 50-pin sub-d, binary inputs/outputs, analog inputs Pin No. Significance Connector 1 Binary output 1 X7A 34 " " 2 X7A 18 " " 3 X7A 2 " " 4 X7A 35 " " 5 X7A 19 " " 6 X7A 3 " " 7 X7A 36 " " 8 X7A 20 External power supply (P24) 4 External ground (M24) 37 Binary output 9 X7B 21 " " 10 X7B 5 " " 11 X7B 38 " " 12 X7B 22 " " 13 X7B 6 " " 14 X7B 39 " " 15 X7B 23 " " 16 X7B 7 External power supply (P24) 40 External ground (M24) 24 Binary input 1 / trigger input 1 X7C 8 " " 2 / trigger input 2 X7C 41 " " 3 / trigger input 3 X7C 25 " " 4 / trigger input 4 X7C 9 " " 5 X7C 42 " " 6 X7C 26 " " 7 X7C 10 " " 8 X7C 43 External power supply (P24) 27 External ground (M24) 11 Binary input 9 X7D 44 " " 10 X7D 28 " " 11 X7D 12 " " 12 X7D 45 " " 13 X7D 29 " " 14 X7D 13 " " 15 X7D 46 " " 16 X7D 30 External power supply (P24) 14 External ground (M24) 47 Ground, A/D converter 31 " " " " 15 Analog input 1+ X7E 48 " " 1- X7E 32 " " 2+ X7F 16 " " 2- X7F 49 " " 3+ X7G 33 " " 3- X7G 17 " " 4+ X7H 50 " " 4- X7H Siemens AG Dk No Edition

18 Struc mask, IT41 7. Struc mask, IT41 : IT41 "Technology module, LE-Bus" X6A 4K < "Speed sensing 1" X6B 4K < "Speed sensing 2" X6C 4K < "Speed sensing 3" X6D 4K < "Speed sensing 4" X7C 8K < "Binary inputs 1" X7D 8K < "Binary inputs 2" X7E 1K < "A/D converter 1" X7F 1K < "A/D converter 2" X7G 1K < "A/D converter 3" X7H 1K < "A/D converter 4" X6E 1K > "D/A converter 1" X6F 1K > "D/A converter 2" X6G 1K > "D/A converter 3" X6H 1K > "D/A converter 4" X7A 8K > "Binary outputs 1" X7B 8K > "Binary outputs 2" 8. Supplementary components (optional) 8.1. Interface modules The signal cables on the plant side must be fed to the board via an interface module. The following SE modules are recommended: - SB10 6DD AE2 8 x 24 V binary inputs or outputs, LED non-floating - SB60 6DD AF4 8, 220/24V binary inputs, LED floating - SE61 6DD EB3 8, 48 V / 24 V binary inputs, LED floating - SU12 6DD AJ1 10 terminals / 10-pin connector - SU10 6DD FG0 26 terminals / 26-pin connector acc. to DIN Edition Siemens AG Dk No

19 Supplementary components (optional) 8.2. Cable sets The following cables can be used to connect the interface modules to the board: - SC49 6DD EK0 50-core, twisted pair cable; changes-over from 50-pin sub-d plug connector, according to DIN 41652, to a 2 x 26-pin socket connector, according to DIN 41651; - SC54 6DD FE0 50-core twisted pair cable; changes-over between 50-pin sub-d plug connector, according to DIN 41652, to a 5 x 10-pin socket connector, according to DIN Cable SC53 and SU10 interface modules are recommended for connectors X6 and X7. When using this cable, the connector assignment is changed-over according to the following tables: Siemens AG Dk No Edition

20 Supplementary components (optional) For connector X6: Socket connector acc. to DIN (or connector assign. SU10) Sub-D plug connector acc. to DIN (or connector assign. X6) Significance A1 1 Incremental encoder 1, track A+ / SONY encoder 1 V+ A2 34 " " A- / " " V- A3 18 " " B+ / " " R+ A4 2 " " B- / " " R- A5 35 " " N+ A6 19 " " N- A7 3 Incremental encoder 2, track A+ / SONY encoder 2 V+ A8 36 " " A- / " " V- A9 20 " " B+ / " " R+ A10 4 " " B- / " " R- A11 37 " " N+ A12 21 " " N- A13 5 Incremental encoder 3, track A+ / SONY encoder 3 V+ A14 38 " " A- / " " V- A15 22 " " B+ / " " R+ A16 6 " " B- / " " R- A17 39 " " N+ A18 23 " " N- A19 7 Incremental encoder 4, track A+ / SONY encoder 4 V+ A20 40 " " A- / " " V- A21 24 " " B+ / " " R+ A22 8 " " B- / " " R- A23 41 " " N+ A24 25 " " N- A25 9 (15V encoder power supply) B1 42 Ground, encoder B2 26 Ground, encoder B3 10 Monitoring input 1 (for incremental encoders) B4 43 " 2 " B5 27 " 3 " B6 11 " 4 " B7 44 Alarm input 1 (for SONY encoder) B8 28 " 2 " B9 12 " 3 " B10 45 " 4 " B11 29 Alarm output 1 (or SONY encoder) B12 13 " 2 " B13 46 " 3 " B14 30 " 4 " B15 14 Alarm ground (for SONY encoders) B16 47 Ground, D/A converter B17 31 " " " " B18 15 Analog output 1+ B19 48 " 1- (ground, D/A converter) B20 32 " 2+ B21 16 " 2- (ground, D/A converter) B22 49 " 3+ B23 33 " 3- (ground, D/A converter) B24 17 " 4+ B25 50 " 4- (ground, D/A converter) 16 Edition Siemens AG Dk No

21 Supplementary components (optional) For connector X7: Socket connector acc. to DIN (or connector assign. SU10) Sub-D plug connector acc. to DIN (or connector assign. X7) Significance A1 1 Binary output 1 A2 34 " " 2 A3 18 " " 3 A4 2 " " 4 A5 35 " " 5 A6 19 " " 6 A7 3 " " 7 A8 36 " " 8 A9 20 External power supply (P24) A10 4 External ground (M24) A11 37 Binary output 9 A12 21 " " 10 A13 5 " " 11 A14 38 " " 12 A15 22 " " 13 A16 6 " " 14 A17 39 " " 15 A18 23 " " 16 A19 7 External power supply (P24) A20 40 External ground (M24) A21 24 Binary input 1 A22 8 " " 2 A23 41 " " 3 A24 25 " " 4 A25 9 " " 5 B1 42 " " 6 B2 26 " " 7 B3 10 " " 8 B4 43 External power supply (P24) B5 27 External ground (M24) B6 11 Binary input 9 B7 44 " " 10 B8 28 " " 11 B9 12 " " 12 B10 45 " " 13 B11 29 " " 14 B12 13 " " 15 B13 46 " " 16 B14 30 External power supply (P24) B15 14 External ground (M24) B16 47 Ground, A/D converter B17 31 " " " " B18 15 Analog input 1+ B19 48 " " 1- B20 32 " " 2+ B21 16 " " 2- B22 49 " " 3+ B23 33 " " 3- B24 17 " " 4+ B25 50 " " 4- Siemens AG Dk No Edition

22 Supplementary components (optional) The SC49 cable can also be used connector X7. The following chnageover is obtained according to the following table : For connector X7: 5 x socket connectors acc. to DIN Sub-D plug connector acc. to DIN (and connector assign. X7) Significance A1 1 Binary output 1 A2 34 " " 2 A3 18 " " 3 A4 2 " " 4 A5 35 " " 5 A6 19 " " 6 A7 3 " " 7 A8 36 " " 8 A9 20 External power supply (P24) A10 4 External ground (M24) B1 37 Binary output 9 B2 21 " " 10 B3 5 " " 11 B4 38 " " 12 B5 22 " " 13 B6 6 " " 14 B7 39 " " 15 B8 23 " " 16 B9 7 External power supply (P24) B10 40 External ground (M24) C1 24 Binary input 1 C2 8 " " 2 C3 41 " " 3 C4 25 " " 4 C5 9 " " 5 C6 42 " " 6 C7 26 " " 7 C8 10 " " 8 C9 43 External power supply (P24) C10 27 External ground (M24) D1 11 Binary input 9 D2 44 " " 10 D3 28 " " 11 D4 12 " " 12 D5 45 " " 13 D6 29 " " 14 D7 13 " " 15 D8 46 " " 16 D9 30 External power supply (P24) D10 14 External ground (M24) E1 47 Ground, A/D converter E2 31 " " " " E3 15 Analog input 1+ E4 48 " " 1- E5 32 " " 2+ E6 16 " " 2- E7 49 " " 3+ E8 33 " " 3- E9 17 " " 4+ E10 50 " " 4-18 Edition Siemens AG Dk No

23 Others 9. Others 9.1. Attachments Block diagram Pulse sensing 1/2 Pulse sensing 3/4 Electrical isolation Changeover switch Changeover switch Changeover switch Changeover switch Incremental-, SONYinputs Driver T filter Binary inputs Latch 50 ma driver Binary outputs Monitoring inputs, alarm identification, alarm reset Monitoring inputs D A IT41 controller D A Analog outputs Address bus Data bus Control bus D D A A Dual port RAM D A M U X + - Analog inputs Address bus Data bus Control bus P5 M P15 N15 Local expansion bus File : IT41_P1.DRW Siemens AG Dk No Edition

24 Dimension drawing Dimension drawing, with view of the IT41 front panel 2SE MB Layout diagram Layout diagram IT41 2SE AO 20 Edition Siemens AG Dk No

25 ESD instructions 10. ESD instructions Components which can be destroyed by electrostatic discharge (ESD) Generally, electronic boards should only be touched when absolutely necessary. The human body must be electrically discharged before touching an electronics board. This can be simply done by touching a conductive, grounded object directly beforehand (e.g. bare metal cubicle components, socket outlet protective conductor contact). Boards must not come into contact with highly-insulating materials - e.g. plastic foils, insulated desktops, articles of clothing manufactured from man-made fibers. Boards must only be placed on conductive surfaces. When soldering, the soldering iron tip must be grounded. Boards and components should only be stored and transported in conductive packaging (e.g. metalized plastic boxes, metal containers). If the packing material is not conductive, the boards must be wrapped with a conductive packing material, e.g. conductive foam rubber or household aluminum foil. The necessary ESD protective measures are clearly shown in the following diagram. a = Conductive floor surface b = ESD table c = ESD shoes d = ESD overall e = ESD chain f = Cubicle ground connection Seated Standing Standing / sitting Siemens AG Dk No Edition

26 ESD instructions Drives and Standard Products Motors and Drive Systems Group Postfach 3269, D Erlangen System-Based Drive Technology 22 Edition Siemens AG Dk No

27 ESD instructions Siemens AG Dk No Edition

SIMADYN D Digital Control System. Fiber-Optic Rack Coupling CS12. User Manual. Edition DK No

SIMADYN D Digital Control System. Fiber-Optic Rack Coupling CS12. User Manual. Edition DK No SIMADYN D Digital Control System User Manual Fiber-Optic Rack Coupling CS12 Edition 05.95 DK No. 237741 User Manual, Fiber-Optic Rack Coupling CS12 Edition Status 1 Fiber-Optic Rack Coupling CS12 05.95

More information

SIMADYN D Digital Control System. Processor Module PM4. User Manual. Edition DK No

SIMADYN D Digital Control System. Processor Module PM4. User Manual. Edition DK No SIMADYN D Digital Control System User Manual Processor Module PM4 Edition 05.95 DK No. 221744 User Manual, Processor Module PM4 Edition Status 1 Processor Module PM4 05.95 Copying of this document and

More information

SIMADYN D Digital Control System. Subrack SR24.x. User Manual. Edition DK No

SIMADYN D Digital Control System. Subrack SR24.x. User Manual. Edition DK No SIMADYN D Digital Control System User Manual Subrack SR24.x Edition 04.97 DK No. 213843 User Manual, Subrack SR24.x Edition Status 1 Subrack SR24.x 05.95 2 Subrack SR24.x 04.97 Copying of this document

More information

SINAMICS G130. Terminal Module 150 (TM150) Operating Instructions 03/2013 SINAMICS

SINAMICS G130. Terminal Module 150 (TM150) Operating Instructions 03/2013 SINAMICS SINAMICS G130 Operating Instructions 03/2013 SINAMICS s Safety information 1 General information 2 SINAMICS SINAMICS G130 Mechanical installation 3 Electrical installation 4 Technical specifications 5

More information

SINAMICS G130. Voltage Sensing Module 10 (VSM10) Operating Instructions 05/2010 SINAMICS

SINAMICS G130. Voltage Sensing Module 10 (VSM10) Operating Instructions 05/2010 SINAMICS SINAMICS G130 Operating Instructions 05/2010 SINAMICS s Safety information 1 General 2 SINAMICS SINAMICS G130 Voltage Sensing Module 10 (VSM10) Mechanical installation 3 Electrical installation 4 Technical

More information

SINAMICS G130. Voltage Sensing Module 10 (VSM10) Operating instructions 03/2011 SINAMICS

SINAMICS G130. Voltage Sensing Module 10 (VSM10) Operating instructions 03/2011 SINAMICS SINAMICS G130 Operating instructions 03/2011 SINAMICS s Safety information 1 General 2 SINAMICS SINAMICS G130 Voltage Sensing Module 10 (VSM10) Mechanical installation 3 Electrical installation 4 Technical

More information

Siemens Industrial s

Siemens Industrial s SINAMICS G130 Operating Instructions 05/2010 SINAMICS Siemens Industrial s Sinusoidal filter Safety information 1 General 2 SINAMICS SINAMICS G130 Mechanical installation 3 Electrical installation 4 Technical

More information

SIMADYN D Digital Control System. Processor module PM16. User Manual. Edition DK-Nr

SIMADYN D Digital Control System. Processor module PM16. User Manual. Edition DK-Nr SIMADYN D Digital Control System User Manual Processor module PM16 Edition 05.95 DK-Nr. 221441 User Manual, Processor module PM16 Edition Edition status 1 Processor module PM16 03.91 2 Processor module

More information

SINAMICS. SINAMICS G120P dv/dt filter plus Voltage Peak Limiter. Safety information 1. General. Mechanical installation. Electrical installation 4

SINAMICS. SINAMICS G120P dv/dt filter plus Voltage Peak Limiter. Safety information 1. General. Mechanical installation. Electrical installation 4 Safety information 1 General 2 SINAMICS SINAMICS G120P dv/dt filter plus Voltage Peak Limiter Operating Instructions Mechanical installation 3 Electrical installation 4 Maintenance and servicing 5 Technical

More information

dv/dt filter compact plus Voltage Peak Limiter SINAMICS SINAMICS G120P dv/dt filter compact plus Voltage Peak Limiter Safety information 1 General 2

dv/dt filter compact plus Voltage Peak Limiter SINAMICS SINAMICS G120P dv/dt filter compact plus Voltage Peak Limiter Safety information 1 General 2 dv/dt filter compact plus Voltage Peak Limiter SINAMICS SINAMICS G120P dv/dt filter compact plus Voltage Peak Limiter Operating Instructions Safety information 1 General 2 Mechanical installation 3 Electrical

More information

SIMADYN D Digital Control System. Installation- and EMC Guidelines. User Manual. Edition DK No

SIMADYN D Digital Control System. Installation- and EMC Guidelines. User Manual. Edition DK No SIMADYN D Digital Control System User Manual Installation- and EMC Guidelines Edition 04.97 DK No. 201040 User Manual, Installation- and EMC Guidelines Edition Status 1 Installation- and EMC Guidelines

More information

SIMADYN D Digital Control System. Interface module CS51. User Manual. Edition DK-Nr

SIMADYN D Digital Control System. Interface module CS51. User Manual. Edition DK-Nr SIMADYN D Digital Control System User Manual Interface module CS51 Edition 05.95 DK-Nr. 247142 User Manual, Interface module CS51 Edition Edition status 1 Interface module CS51 10.93 2 Interface module

More information

COM32. Installation & Operation Manual

COM32. Installation & Operation Manual COM32 Installation & Operation Manual DANGER ElectricaI equipment contains hazardous voltages and high speed moving parts. Can cause death, serious injury or property damage. See safety instruction contained

More information

IV-30 Operating Manual for Pulse Distributor Cassette with potential separation

IV-30 Operating Manual for Pulse Distributor Cassette with potential separation IV-30 Operating Manual for Pulse Distributor Cassette with potential separation Edition-/Rev.-Date: 09/08/2006 Document-/Rev.-No.: TR - EAK - BA - GB - 0093-02 Software version: - File name: TR-EAK-BA-GB-0093-02.DOC

More information

Line filter SINAMICS. SINAMICS G130 Line filter. Safety information 1. General 2. Mechanical installation 3. Electrical installation 4

Line filter SINAMICS. SINAMICS G130 Line filter. Safety information 1. General 2. Mechanical installation 3. Electrical installation 4 Safety information 1 General 2 SINAMICS SINAMICS G130 Mechanical installation 3 Electrical installation 4 Technical specifications 5 Operating Instructions Control version V4.8 07/2016 A5E00331460A Legal

More information

SIMADYN D Control System

SIMADYN D Control System SIMADYN D Control System /2 Introduction /4 Subracks / SR6 Subracks /6 SR12 Subracks /8 SR24 Subracks /10 SR 8x Slot Cover /11 CPU Modules /12 PM CPU Module /13 PM6 CPU Module /14 Accessories for CPU Modules

More information

SIMATIC. FM 356 Application Function Module, Installation and Startup. Preface, Contents. User Information. Product Overview

SIMATIC. FM 356 Application Function Module, Installation and Startup. Preface, Contents. User Information. Product Overview Preface, Contents User Information SIMATIC FM 356 Application Function Module, Installation and Startup Manual Product Overview 1 Designing the Mechanical Configuration 2 Addressing the M7-300 Modules

More information

Operating instructions. Standstill monitor A / / 2011

Operating instructions. Standstill monitor A / / 2011 Operating instructions Standstill monitor A300 UK 1 2 3 4 5 6 7 8 7390337 / 01 02 / 2011 1 2 3 4 5 6 7 8 switchpoint min max pulse/min power Made in Germany ifm electronic gmbh D 45127 Essen func. I II

More information

GS202 Encoder Switch

GS202 Encoder Switch GS202 Encoder Switch 20:2 encoder switch 20 encoder inputs (TTL / RS422 standard) Input signals A, /A, B, /B, Z, /Z on each encoder input 2 x 6 control inputs (HTL / PNP) 2 encoder outputs (TTL / RS422

More information

Line reactors SINAMICS. SINAMICS G130 Line reactors. Safety information 1. General. Mechanical installation 3. Electrical installation

Line reactors SINAMICS. SINAMICS G130 Line reactors. Safety information 1. General. Mechanical installation 3. Electrical installation Safety information 1 General 2 SINAMICS SINAMICS G130 Mechanical installation 3 Electrical installation 4 Technical specifications 5 Operating Instructions Control version V4.7 04/2014 A5E00331462A Legal

More information

SIMADYN D. Application Module FM 458. Contents. Definitions. Product description. Mounting. Configuring. ESD guidelines.

SIMADYN D. Application Module FM 458. Contents. Definitions. Product description. Mounting. Configuring. ESD guidelines. s SIMADYN D Application Module FM 458 User Manual Contents Definitions Product description Mounting Configuring 1 2 3 4 ESD guidelines 5 Order No.: 6DD1904-0AE0 Safety guidelines This Manual contains notices

More information

SCHOTT FLM 4 Fiber Lighting Modul. Operating Instructions

SCHOTT FLM 4 Fiber Lighting Modul. Operating Instructions SCHOTT FLM 4 Fiber Lighting Modul Operating Instructions Contents 1. Important information 3 2. Scope of Delivery 3 3. Intended use 3 4. Safety information 4 5. Operation 5 5.1. LED Optics Module 5 5.2.

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current. Power loss. Memory

General information. Display. Supply voltage. Input current. Encoder supply. Output current. Power loss. Memory Data sheet SIPLUS S7-1200 CPU 1214C DC/DC/DC -40...+70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7214-1AG40-0XB0. COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC 10 DO 24 V DC 2 AI 0-10V DC, POWER

More information

Siemens Spares. Preface 1. Scope of Delivery 2 SIPLUS CMS4000. Product Characteristics 3 ION PROFIBUS DP SPY T001 Installation and Maintenance 4

Siemens Spares. Preface 1. Scope of Delivery 2 SIPLUS CMS4000. Product Characteristics 3 ION PROFIBUS DP SPY T001 Installation and Maintenance 4 Preface 1 Scope of Delivery 2 Product Characteristics 3 Industrial I/O-Node ION PROFIBUS DP SPY T001 Installation and Maintenance 4 6AT8000-1BA00-5XA0 Notes on the CE Mark 5 References 6 Appendix 7 Release

More information

Line reactors SINAMICS. SINAMICS G120P Line reactors. Safety information 1. General. Mechanical installation 3. Electrical installation 4

Line reactors SINAMICS. SINAMICS G120P Line reactors. Safety information 1. General. Mechanical installation 3. Electrical installation 4 Safety information 1 General 2 SINAMICS SINAMICS G120P Mechanical installation 3 Electrical installation 4 Technical specifications 5 Operating Instructions Control version V4.6 11/2013 A5E32845290B AA

More information

CONTROL CABINET KR C1 A. Technical Data. KRC1A_Tech.Dat en. 1of 11

CONTROL CABINET KR C1 A. Technical Data. KRC1A_Tech.Dat en. 1of 11 CONTROL CABINET KR C1 A Technical Data 1of 11 e Copyright KUKA Roboter GmbH This documentation or excerpts therefrom may not be reproduced or disclosed to third parties without the express permission of

More information

TM3TI4 module TM3-4 inputs temperature

TM3TI4 module TM3-4 inputs temperature Characteristics module TM3-4 inputs temperature Complementary Analogue input resolution Permissible continuous overload Input impedance LSB value Conversion time Sampling duration Main Range of product

More information

S7-300 Programmable Controller

S7-300 Programmable Controller S7-300 Programmable Controller This description belongs to the following documentation packages with the order numbers given: S7 300 Programmable Controller 6ES7 398 8AA02 8BA0 ET 200M Distributed I/O

More information

SITOP power supply. Selectivity modules. Overview. Safety notes. Description, device design, dimension drawing. Mounting/removal 3

SITOP power supply. Selectivity modules. Overview. Safety notes. Description, device design, dimension drawing. Mounting/removal 3 Overview Safety notes 1 SITOP power supply Manual Description, device design, dimension drawing 2 Mounting/removal 3 Mounting position, mounting clearances 4 Installation 5 Technical data 6 Safety, approvals,

More information

Industriefunkuhren. Technical Manual. Signal Converter. for DIN Rail Mounting Series 4800xx-yy ENGLISH

Industriefunkuhren. Technical Manual. Signal Converter. for DIN Rail Mounting Series 4800xx-yy ENGLISH Industriefunkuhren Technical Manual Signal Converter for DIN Rail Mounting Series 4800xx-yy ENGLISH Version: 01.01-19.07.2007 2 / 23 Signal Converter 4800 - V01.01 INPORTANT NOTES Downloading Technical

More information

HITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions

HITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions HITACHI EH-150 series PLC Resistance Temperature Detective input module Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction

More information

Central processing units CPU 221, CPU 222, CPU 224, CPU 224 XP, CPU 224 XPsi, CPU 226

Central processing units CPU 221, CPU 222, CPU 224, CPU 224 XP, CPU 224 XPsi, CPU 226 Overview CPU 226 The high-performance package for complex technical tasks With additional PPI port for more flexibility and communication options With 40 inputs/outputs on board Expansion capability for

More information

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes. Input current

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes. Input current Datasheet SIPLUS S7-1200 CPU 1214C DC/DC/DC -40... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7214-1AG31-0XB0. COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER

More information

H Series PLC. ! : Indicates Compulsion. EH-150 Analog input module EH-AXH8M Instruction manual. Safety precautions DANGER CAUTION COMPULSION

H Series PLC. ! : Indicates Compulsion. EH-150 Analog input module EH-AXH8M Instruction manual. Safety precautions DANGER CAUTION COMPULSION H Series PLC EH-150 Analog input module EH-AXH8M Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction manual and all the

More information

Rhino Buffer Module PSM24-BFM600S. Operating Instructions

Rhino Buffer Module PSM24-BFM600S. Operating Instructions Rhino Buffer Module PSM24-BFM600S Operating Instructions RHINO BUFFER MODULE PSM24-BFM600S Description The PSM24-BFM600S Buffer Module will hold the output voltage of a 24 VDC power supply after brownouts

More information

DANGER indicates that death or severe personal injury will result if proper precautions are not taken.

DANGER indicates that death or severe personal injury will result if proper precautions are not taken. Preface SIMATIC ET 200S distributed I/O Digital electronic module 2RO NO/NC DC24..48V/5A AC24..230V/5A (6ES7132-4HB50-0AB0) SIMATIC ET 200S distributed I/O Digital electronic module 2RO NO/NC DC24..48V/5A

More information

Description. SIMATIC Sensors. RF systems Wide-range power supply unit for SIMATIC RF systems. Operating Instructions 11/2007 J31069-D0169-U001-A4-7618

Description. SIMATIC Sensors. RF systems Wide-range power supply unit for SIMATIC RF systems. Operating Instructions 11/2007 J31069-D0169-U001-A4-7618 1 SIMATIC Sensors RF systems Wide-range power supply unit for SIMATIC RF systems Operating Instructions 11/2007 J31069-D0169-U001-A4-7618 Safety Guidelines This manual contains notices you have to observe

More information

Operating instructions. Speed monitor D / / 2014

Operating instructions. Speed monitor D / / 2014 Operating instructions Speed monitor D200 80005257 / 00 05 / 2014 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5 2.2 Target group...5

More information

General information. Display. Supply voltage

General information. Display. Supply voltage Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 6 DI 24V DC; 4 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information Product

More information

Supply voltage. Input current. Encoder supply. Memory

Supply voltage. Input current. Encoder supply. Memory Data sheet SIMATIC S7-200, CPU 224XP COMPACT UNIT, DC POWER SUPPLY 14 DI DC/10 DO DC, 2 AI, 1 AO 12/16 KB CODE/10 KB DATA, 2 PPI/FREEPORT PORTS Supply voltage Rated value (DC) 24 V DC Load voltage L+ Rated

More information

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02-0AA0) Preface. Properties 2. Diagnostics 3.

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02-0AA0) Preface. Properties 2. Diagnostics 3. Preface 1 Properties 2 SIMATIC Diagnostics 3 ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02- Manual 01/2008 A5E01254028-01 Safety Guidelines This manual contains notices

More information

SIWAREX JB Aluminum Housing. Instruction Manual Edition 03/2006

SIWAREX JB Aluminum Housing. Instruction Manual Edition 03/2006 s SIWAREX JB Aluminum Housing Instruction Manual Edition 03/2006 Table of Contents Table of Contents... 2 Warning and Safety Terms... 3 General... 4 1 Technical Description... 5 1.1 Area of Application...

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Data sheet SIMATIC S7-1200F, CPU 1215 FC, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24VDC; 10 DO 24V DC 0.5A; 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA

More information

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01-0AA0) Preface. Properties 1. Diagnostics 2.

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01-0AA0) Preface. Properties 1. Diagnostics 2. SIMATIC ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01- SIMATIC Preface Properties 1 Diagnostics 2 ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A

More information

DM-918 OPERATIONS MANUAL AUTORANGING MULTIMETER

DM-918 OPERATIONS MANUAL AUTORANGING MULTIMETER DM-918 OPERATIONS MANUAL AUTORANGING MULTIMETER SAFETY INFORMATION The following safety information must be observed to ensure maximum personal safety during the operation of this meter: This meter is

More information

Operating Instructions (Compact) SIMATIC. Industrial PC SIMATIC Microbox PC 420. Siemens. Release 11/2006 A5E

Operating Instructions (Compact) SIMATIC. Industrial PC SIMATIC Microbox PC 420. Siemens. Release 11/2006 A5E Operating Instructions (Compact) 1 SIMATIC Industrial PC Release 11/2006 A5E00344128-04 Siemens Safety Guidelines This manual contains notices you have to observe in order to ensure your personal safety,

More information

VersaMax IP I/O Module

VersaMax IP I/O Module Module accepts four digital input signals and provides four digital outputs. It connects to a local bus that is interfaced to a Profibus-DP / PROFINET network by a Profibus Interface Unit (IC677PBI001)

More information

Analog Monitor Installation Manual

Analog Monitor Installation Manual Analog Monitor Installation Manual Part Number: 144-23919 Copyright 2011 Magnetek 1. Preface and Safety Magnetek manufactures products used as components in a wide variety of industrial systems and equipment.

More information

DANGER indicates that death or severe personal injury will result if proper precautions are not taken.

DANGER indicates that death or severe personal injury will result if proper precautions are not taken. SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O Digital electronic module 4DI DC24V HF (6ES7131-4BD01-0AB0) Manual Preface Properties 1 Parameters 2 Diagnostics 3 04/2007 A5E01077141-01

More information

Manual Release 09/2002. cm-lon FOR LOGO! Communication with LOGO! with LON systems

Manual Release 09/2002. cm-lon FOR LOGO! Communication with LOGO! with LON systems Manual Release 09/2002 cm-lon FOR LOGO! Communication with LOGO! with LON systems s LOGO! Expansion Module Manual Chapters Safety Notices 1 Getting to know 2 Mounting and wiring the 3 Putting the into

More information

Analog Input Installation Manual

Analog Input Installation Manual Analog Input Installation Manual August 2011 Part Number: 144-23917 Copyright 2011 Magnetek 1. Preface and Safety Magnetek manufactures products used as components in a wide variety of industrial systems

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Datasheet SIMATIC S7-1200, CPU 1212C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 8 DI 24V DC; 6 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information Engineering

More information

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes Datasheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO 24V DC 0.5A 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY:

More information

ST (6ES7132-6FD00-0BB1)

ST (6ES7132-6FD00-0BB1) SIMATIC ET 200SP Digital output module DQ 4x24..230VAC/2A ST (6ES7132-6FD00-0BB1) Manual Edition 02/2014 Answers for industry. DQ 4x24..230VAC/2A ST Preface Guide to documentation 1 SIMATIC ET 200SP DQ

More information

ET 200S distributed I/O system 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

ET 200S distributed I/O system 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0) 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32- SIMATIC Preface 1 Properties 2 Diagnostics 3 ET 200S distributed I/O system 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32- Manual 10/2015

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Data sheet SIMATIC S7-1200F, CPU 1214 FC, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY 125 KB General information

More information

Instruction manual. Output chokes 690V. Safety information 1. General 2. Mechanical installation 3. Electrical installation 4

Instruction manual. Output chokes 690V. Safety information 1. General 2. Mechanical installation 3. Electrical installation 4 Instruction manual Output chokes 690V Safety information 1 General 2 Mechanical installation 3 Electrical installation 4 Maintenance and servicing 5 Technical specifications 6 Copyright 2018 Legal information

More information

PSR-PC50. SIL 3 coupling relay for safety-related switch on. Data sheet. 1 Description

PSR-PC50. SIL 3 coupling relay for safety-related switch on. Data sheet. 1 Description SIL 3 coupling relay for safety-related switch on Data sheet 105818_en_01 PHOENIX CONTACT 2014-08-18 1 Description The PSR-PC50 SIL coupling relay can be used for power adaptation and electrical isolation

More information

DI 8x24VDC ST digital input module SIMATIC. ET 200SP DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) Preface. Documentation guide

DI 8x24VDC ST digital input module SIMATIC. ET 200SP DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) Preface. Documentation guide DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) SIMATIC ET 200SP DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) Manual Preface Documentation guide 1 Product overview 2 Connecting 3 Parameter

More information

TM3TM3 module TM3-2 temperature inputs and 1 analog output

TM3TM3 module TM3-2 temperature inputs and 1 analog output Characteristics module TM3-2 temperature inputs and 1 analog output Main Range of product Product or component type Range compatibility Analogue input number 2 Analogue input type Analogue output number

More information

Shutter Assembly Guide Frame Accessory

Shutter Assembly Guide Frame Accessory Shutter Assembly Guide Frame Accessory SIZE: FS1 3-pole Cat. No.: WLG3SHUT1L For Use With: Circuit Breaker Adapters WLG _ 13 Installation Instructions Instruction No.: 923 99902 176 Danger Peligro Danger!

More information

V E1B Snap-in I/O Module

V E1B Snap-in I/O Module V200-18-E1B Snap-in I/O Module The V200-18-E1B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 16 isolated digital

More information

EMMS-T A00 SIERS. Siemens integrated electrical racking system instruction manual. usa.siemens.com/mvswitchgear

EMMS-T A00 SIERS. Siemens integrated electrical racking system instruction manual. usa.siemens.com/mvswitchgear EMMS-T40013-01-4A00 SIERS Siemens integrated electrical racking system instruction manual usa.siemens.com/mvswitchgear SIERS Siemens Integrated Electrical Racking System Instruction Manual Hazardous voltages

More information

TRIO-DIODE/12-24DC/2X10/1X20

TRIO-DIODE/12-24DC/2X10/1X20 Redundancy module INTERFACE Data sheet 104278_en_00 1 Description PHOENIX CONTACT 20100423 Features TRIO DIODE is the DINrail mountable redundancy module from the TRIO POWER product range. Using the redundancy

More information

Serial PROFIBUS Interface

Serial PROFIBUS Interface Installation Manual Serial PROFIBUS Interface Version: EN-062016-2.3 Copyright 2016 Softing Industrial Automation GmbH Disclaimer of liability The information contained in these instructions corresponds

More information

Sigma DeviceNet Tool Change Systems USER S GUIDE Rev 05

Sigma DeviceNet Tool Change Systems USER S GUIDE Rev 05 Sigma DeviceNet Tool Change Systems USER S GUIDE 94018 Rev 05 648 Saratoga Road Glenville, NY 12302 USA Phone: 518 384 1000 Fax 518 384 1200 www.arobotics.com 1. PRECAUTIONS 1 Sigma DNET Module 1 2.0 DNET

More information

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes. Input current

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes. Input current Datasheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information Engineering

More information

Operating Instructions Edition 01/2005. Digital I/O module CPCI-EA221. sicomp

Operating Instructions Edition 01/2005. Digital I/O module CPCI-EA221. sicomp Operating Instructions Edition 01/2005 Digital I/O module sicomp INDUSTRIAL MICROCOMPUTERS Introduction 1 Description 2 SICOMP Industrial Microcomputers Digital I/O module Technical Specifications 3 Replacement

More information

GFK-2415A March Type of sensor connection

GFK-2415A March Type of sensor connection VersaMax IP Expansion Module has four analog differential inputs that can be configured as current or voltage inputs. It connects to a local bus that is interfaced to a Profibus-DP / PROFINET network by

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Data sheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 100 KB General information Firmware

More information

Operating instructions. Switching amplifier DN0210 DN / / 2015

Operating instructions. Switching amplifier DN0210 DN / / 2015 Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5

More information

Display. Supply voltage. Input current. Encoder supply. Output current. Power losses. Memory

Display. Supply voltage. Input current. Encoder supply. Output current. Power losses. Memory Datasheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB Display with display Supply

More information

V E1B Snap-in I/O Module

V E1B Snap-in I/O Module V200-18-E1B Snap-in I/O Module The V200-18-E1B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 16 isolated digital

More information

2-Axis Counter BDD 622

2-Axis Counter BDD 622 2-Axis Counter BDD 622 Technical Description, User's Guide english No. 622-221 D/E. Edition 0701; Subject to modification. www.balluff.com Balluff GmbH Schurwaldstrasse 9 73765 Neuhausen a.d.f. Germany

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO 24V DC 0.5A 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information Engineering

More information

General information. Display. Supply voltage

General information. Display. Supply voltage Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information

More information

BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) SIMATIC. ET 200SP BaseUnits. Preface. Guide to the documentation 1. Product overview 2

BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) SIMATIC. ET 200SP BaseUnits. Preface. Guide to the documentation 1. Product overview 2 BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) SIMATIC ET 200SP BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) Manual Preface Guide to the documentation 1 Product overview 2 BaseUnits for I/O modules 3 BaseUnits

More information

IO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs

IO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs IO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs The IO-DI8-TO8 and IO-DI8-TO8-L are I/O expansion modules that can be used in conjunction with specific Unitronics OPLC controllers. The

More information

RS 485 Mini Modbus 1AO

RS 485 Mini Modbus 1AO RS 485 Mini Modbus 1AO Version 1.0 14/08/2014 Manufactured for Thank you for choosing our product. This manual will help you with proper support and proper operation of the device. The information contained

More information

SINAMICS Siemens Controlss

SINAMICS Siemens Controlss SINAMICS G150 / S150 / S120 Cabinet Modules / G130 Operating Instructions 10/2008 SINAMICS Siemens Controlss Preface Introduction 1 SINAMICS G150 / S150 / S120 Cabinet Modules / G130 Operating Instructions

More information

IB ST 24 AO 4/EF. INTERBUS-ST analog output module, 4 outputs, 0-10 V, ±10 V, 0-20 ma, 4-20 ma. Data sheet. 1 Description

IB ST 24 AO 4/EF. INTERBUS-ST analog output module, 4 outputs, 0-10 V, ±10 V, 0-20 ma, 4-20 ma. Data sheet. 1 Description INTERBUS-ST analog output module, 4 outputs, 0-10 V, ±10 V, 0-20 ma, 4-20 ma Data sheet 105597_en_01 PHOENIX CONTACT 2014-10-24 1 Description The module is designed for use within an ST station. It is

More information

PHOENIX CONTACT - 07/2006

PHOENIX CONTACT - 07/2006 Buffer module with maintenance-free capacitor-based power storage device INTERFACE Data sheet 102035_03_en PHOENIX CONTACT - 07/2006 Description Short-term mains interruptions are bridged by QUINT BUFFER,

More information

TELEPERM M. Signal Module (6DS1916-8RR) Manual. Version V 2.2

TELEPERM M. Signal Module (6DS1916-8RR) Manual. Version V 2.2 s TELEPERM M Signal Module (6DS1916-8RR) Manual Release: 09/2005 Version V 2.2 Contents 1 INFORMATIONS ON SAFETY...3 1.1 SAFETY-RELATED GUIDELINES FOR THE USER...3 1.1.1 General...3 1.1.2 Qualified Personnel...3

More information

Medium-Voltage Drive SINAMICS SM150. Type 6SL3845. Tests carried out on drives This documentation pertains to SM150 wassergekühlt G20 F03 F72 F79 F76

Medium-Voltage Drive SINAMICS SM150. Type 6SL3845. Tests carried out on drives This documentation pertains to SM150 wassergekühlt G20 F03 F72 F79 F76 Tests carried out on drives This documentation pertains to SM150 wassergekühlt G20 F03 F72 F79 F76 Reference Manual Medium-Voltage Drive SINAMICS SM150 Type 6SL3845 Edition 02/2019 www.siemens.com/drives

More information

Overvoltage Protection Devices

Overvoltage Protection Devices Siemens AG 2010 Overvoltage Protection Devices /2 Introduction /3 Lightning Arresters, Type 1 /5 Combination Surge Arresters, Type 1 and Type 2 /7 Surge Arresters, Type 2 /11 Surge Arresters, Type 3 /12

More information

General information. Display. Supply voltage

General information. Display. Supply voltage Data sheet SIMATIC S7-1200, CPU 1212C, COMPACT CPU, DC/DC/RLY, ONBOARD I/O: 8 DI 24V DC; 6 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information Product

More information

General information Engineering with Programming package. Display with display

General information Engineering with Programming package. Display with display Datasheet SIPLUS S7-1200 CPU 1212C AC/DC/RLY -40... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7212-1BE31-0XB0. COMPACT CPU, AC/DC/RELAY, ONBOARD I/O: 8 DI 24V DC 6 DO RELAY 2A 2 AI 0-10V DC, POWER

More information

DF PROFI II CPCI. Installation Instructions V Project No.: 5302 Doc-ID.: DF PROFI II CPCI KUNBUS

DF PROFI II CPCI. Installation Instructions V Project No.: 5302 Doc-ID.: DF PROFI II CPCI KUNBUS DF PROFI II CPCI Installation Instructions V1.7 27.02.2017 Project No.: 5302 Doc-ID.: DF PROFI II CPCI KUNBUS h:\dokumente\project\5302_df_profi_ii\anwenderdoku\installation\cpci\kunbus\version_1.6\df

More information

XPSMF40. Main. Safety module name. Monitoring safety detection discrete input Monitoring safety dialogue discrete output

XPSMF40. Main. Safety module name. Monitoring safety detection discrete input Monitoring safety dialogue discrete output Product datasheet Characteristics XPSMF4000 Preventa safety PLC compact - Safe Ethernet Main Range of product Product or component type Safety module name Safety module application Preventa Safety automation

More information

Instruction Manual for 1-Phase 1Q-Power Controller Temvar GE_3

Instruction Manual for 1-Phase 1Q-Power Controller Temvar GE_3 Instruction Manual for 1-Phase 1Q-Power Controller TABLE OF CONTENTS 1 SAFETY AND APPLICATION NOTES FOR DRIVE CONVERTERS... 2 2 DEVICE DESCRIPTION... 3 2.1 General... 3 2.2 Device Construction... 3 2.3

More information

Supply voltage. Input current. Encoder supply. Memory SIMATIC S7-200, CPU 221 COMPACT UNIT, DC POWER SUPPLY 6 DI DC/4 DO DC, 4 KB CODE/2 KB DATA,

Supply voltage. Input current. Encoder supply. Memory SIMATIC S7-200, CPU 221 COMPACT UNIT, DC POWER SUPPLY 6 DI DC/4 DO DC, 4 KB CODE/2 KB DATA, Data sheet SIMATIC S7-200, CPU 221 COMPACT UNIT, DC POWER SUPPLY 6 DI DC/4 DO DC, 4 KB CODE/2 KB DATA, Supply voltage Rated value (DC) 24 V DC Load voltage L+ Rated value (DC) permissible range, lower

More information

DX561 Digital Input/Output Module

DX561 Digital Input/Output Module Ordering Data DATA SHEET DX561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2301 1TNE 968 901 R3101 DX561, digital input/output module, 8 DI

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Data sheet SIMATIC S7-1200, CPU 1217C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT ONBOARD I/O: 10 DI 24V DC; 4 DI RS422/485; 6 DO 24V DC; 0,5A; 4 DO RS422/485; 2 AI 0-10V DC, 2 AQ 0-20MA; POWER SUPPLY: DC

More information

Monitoring technique. VARIMETER Voltage relay MK 9064N, MH 9064

Monitoring technique. VARIMETER Voltage relay MK 9064N, MH 9064 Monitoring technique VARIMETER Voltage relay MK 9064N, MH 9064 0269462 Your Advantages Preventive maintenance For better productivity Quicker fault locating Precise and reliable Min-, Max. value or window

More information

Resolver to Digital Expansion Board

Resolver to Digital Expansion Board Resolver to Digital Expansion Board Catalog No. EXB009A01 Installation and Operating Manual 6/98 MN1313 Table of Contents Section 1 General Information............................. 1-1 Introduction....................................

More information

Definitions and support Product description SIMATIC Mounting Application Module Configuring FM DP Assembly guidelines User Manual

Definitions and support Product description SIMATIC Mounting Application Module Configuring FM DP Assembly guidelines User Manual s SIMATIC Application Module FM 458-1 DP User Manual Edition 03/2009 A5E01078222-02 Contents Definitions and support Product description Mounting Configuring Assembly guidelines Index 1 2 3 4 5 Safety

More information

XE2 DC current relay for loss of excitation protection. Manual XE2 (Revision A)

XE2 DC current relay for loss of excitation protection. Manual XE2 (Revision A) XE2 DC current relay for loss of excitation protection Manual XE2 (Revision A) Woodward Manual XE2 GB Woodward Governor Company reserves the right to update any portion of this publication at any time.

More information

DC562, digital input/output module,

DC562, digital input/output module, Ordering Data DATA SHEET DC562 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 231 900 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE

More information

Fieldbus Independent I/O Modules 2 AI 4-20 ma, Single-Ended Manual

Fieldbus Independent I/O Modules 2 AI 4-20 ma, Single-Ended Manual Fieldbus Independent 2 AI 4-20 ma, Single-Ended 750-466 Manual Version 1.0.2 ii General Copyright 2006 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße

More information