Pushbutton Units and Indicator Lights

Transcription

1 SIGNUM 3S3 Introduction Overview SIGNUM is a range of plastic and metal control devices for frontplate mounting and rear wire connection. SIGNUM is of modern industrial design with a very construction and can be installed rapidly by a single person. In addition, SIGNUM Metallic is designed for the world market with a high degree of protection according to IP 67 and NEMA 4. Specifications IEC , EN (DIN VDE 0660 Part 100), IEC , EN (DIN VDE 0660 Part 200) Design The plastic versions of the SIGNUM devices are available in flush, round and square designs, while the metal versions are available in the round design. A combination of membrane keyboards and 3S3 plastic elements supports the appearance. The construction makes cleaning easy. The operating surfaces of the pushbuttons and indicator lights are concave. The lenses of the indicator lights are convex. Inscription Inscriptions are possible by inscribing directly onto the actuator by means of a laser as well as by using labels, backing plates or the inscription system for SIGNUM. Design A command point consists of a front-mounted operating element or lens, a holder for mounting, contact block and/or lamp holder, behind the switch panel. The holder for the round version can be turned and can therefore be used for switch panel depths of 1 to 4 mm or 3 to 6 mm. The switch panel depth of 1 to 4 mm can be compensated with the holder for the square version. The normal version can be fitted with two contact blocks. When three contact blocks or one lampholder and two contact blocks are requi, an additional holder must be plugged into the operating element. A holder with pressure pieces is requi for operating a middle contact block including selector switches, safety locks or double pushbuttons. Complete units are offe for the most commonly used applications. Holder The holder is positioned when delive, at a switchboard thickness of 1 to 4 mm and is placed in the direction of the arrow on the actuator/indicator, 1 4 mm from the back. The fixing screw is located underneath, on the right. For a switchboard thickness of 3 to 6 mm, the holder is reversed and mounted in the direction of the arrow at 3 6 mm and the fixing screw is located on the upper right. In this case, the fixing screw must be rotated anticlockwise to its limit before mounting the holder. When legend holders, protective boots or similar accessories are used, the maximum permissible panel thickness must be uced by wall thickness of the accessory. Contact blocks and lampholders The contact blocks are fitted with a slow-action contact ( contact or 1 NC contact) with double operating contacts. These ensure a high switching reliability even with small voltages and currents of 5 V/1 ma and above. They are suitable for use in electronic systems as well as conventional controls. The switch contacts of the NC contact are positively driven. A lampholder for lamps with A 9s (screw connection) and W2 4.6 d (solder connection) are available for the illuminated pushbutton units and indicator lights in addition to the contact blocks. Contact blocks and lamp holders have terminal designations in accordance with EN Mounting SIGNUM devices are easily and rapidly connected: Actuators or indicator lights are positioned in the opening of the front panel from the front Position the holder from the rear Tighten the screw on the holder Snap on the contact block or the lamp holder directly onto the operating mechanism from the back Terminals Devices for Screw terminal connection, Cage clamp terminal connection and Solder connection (solder pins mm) are available. The 3S3 command devices have screw connections in the SIGUT termination system. The open terminals, captive screws, funnel-shaped wiring openings and screwdriver fed openings save time when connecting. Powe screwdrivers can be used. The connection with cage spring terminal is rapid and the actuators can be mounted flush against each other. Enclosure Plastic housings for 1, 2, 3, 4 or 6 actuators are available for the round model. Housings for more than 6 actuators can be supplied upon request. They are suitable for the round and square models. Communications-capable SIGNUM 3S3 control devices SIGNUM 3S3 control devices can be connected to the actuator-sensor interface (AS interface) networking system by means of the AS-Interface 4I/4O application module for mounting on printed circuit boards. With this, four mechanical connecting devices can be scanned or four indicator lights can be controlled. The illuminated command devices are supplied via the AS interface cable. Pushbutton unit, plastic, with button nsd0037h Pushbutton unit, metal, with button nsd0367h The following connections to the AS interface are possible: AS-i user module for printed circuit boards AS-i single connection AS-i front plate module AS-i housing For further information on the AS interface refer to Part 1. SIGNUM is also communications-capable via PROFIUS- DP. Configuring SIGNUM 3S3 configuring software The SIGNUM 3S3 control devices can be selected and orde using this software: Supply and ordering of customer-specific enclosures, Construction tool for designing control panels with SIGNUM 3S3 command devices, Easy selection of the most varied choice of inscriptions, Generation of parts lists, component mounting diagrams and drill templates, Generation of the completed order. 9/17

2 SIGNUM 3S3 Introduction Design Front plate mounting A C D E F Actuator Front plate Holder Contact block Lampholder Mounting element Used on printed-circuitboards A Actuator Front plate C Holder D Holder for printed-circuitboard E Lampholder F Contact block G PC Contact assignment For one contact block with 2 contacts, e. g. For 2 contact blocks each with 1contact, e.g. 1NO, 1NC For 2 contact blocks each with 2 contacts, e. g., 1NO + 1NC For one contact block with 2 contacts, e. g. and a lampholder Fixing depth Depth for contact blocks with 1 contact Depth for contact blocks with 2 contacts Carrier for 3 blocks Contact blocks, lamp holders Holder 9/18

3 Technical data according to IEC (DIN VDE 0660 Part 200) and EN 418 Rated insulation voltage U i Screw connection Solde connection Pushbutton Units and Indicator Lights 400 V 250 V Pollution degree Class 3 (according to DIN VDE 0110) Conventional free-air thermal current I th 10 A Rated operational voltage U e and the related rated operational current I e s and u data Rated voltage Contact block Indicator light Conventional free-air thermal current Switching capacity Contact stability Test voltage/test current Short-circuit protection (without any welding according to DIN VDE 0660, Part 200) DIAZED fuse link, utilization category gl/gg Miniature circuit-breaker with G characteristic acc. to DIN VDE 0641 Mechanical endurance Pushbutton units and contact blocks Actuators, rotary or maintained contact Illuminated pushbutton units Electrical endurance with AC-15 duty with 3TF3, 3TF40 to 3TF43 contactors with duty DC-12 or DC-13 Operating frequency Climatic withstand capability Ambient temperature Degree of protection acc. to IEC , DIN VDE 0470 Lampholders Screw terminal connection Solde connection Conductor cross-sections Screw terminal connection: finely stranded with end sleeve solid solid with end sleeves to DIN Solde connection Tightening torque of holder screw Tightening torque of terminal screws Terminal marking Device identification Safety measures for SIGNUM, plastic at 24 V 48 V 110 V 230 V 400 V AC 50 to 60 Hz DC I e /AC-12 I e /AC-15 I e /DC-12 I e /DC-13 Screw/solder connection A Screw terminals A Solder pins A Screw/solder connection A Screw/solder connection A AC 300 V 125 V AC; 2.5 W for A 9s, or 60 V AC; 1 W for wedge base W2 4.6 d 10 A A 300; R 300; A 600 same polarity 5 V/1 ma 10 A TDz, 16 A Dz 10 A operating cycles operating cycles operating cycles operating cycles The endurance life of the contacts is not only dependent on the breaking current but also on the voltage, the inductivity of the current circuit and the switching speed. General information data is not possible operating cycles per hour Climate-proof; suitable for use on board ship 25 to +70 C for LEDs or non-illuminated devices 25 to +60 C for illuminated device with filament bulbs IP 20 Contact block connections and lampholders behind the front panel IP 40 Switchrooms of the contact blocks behind the front panel IP 66 Enclosed plastic actuators and indicators; with IP 67 protective caps IP 67 NEMA type 4 metal actuators and indicators for lamps with A 9s base; incandescent, glow and LED lamps for lamp with wedge base W2 4.6 d; glow and LED lamps to 1.5 mm to 2.5 mm to 0.75 mm 2 Solder pins 0.8 mm 0.8 mm max. 1 Nm Nm acc. to EN : Sequence number on the holder Function number on the contact block through snap-on label Safety requirements are met automatically when the actuators and lens assemblies are mounted on metal front plates and housings. When mounted in insulated enclosures, the protective insulation safety requirements are met. Touch protection (screw connection) Finger-proof acc. to VG 4 and DIN VDE 0106 Shock resistance according to IEC Part g Devices without incandescent lamp 30 g Devices with incandescent lamp Shock duration 11 ms Shock form Half-sine SIGNUM 3S3 Introduction /19

4 SIGNUM 3S3, Complete units actuator Contacts for frontplate mounting } Prefer type Pushbutton unit } 3S3202-0AA with button 1 NC 3S3203-0AA11 1 NC } 3S3203-0AA21 3S3202-0AA31 } 3S3202-0AA41 3S3202-0AA51 } 3S3202-0AA61 Pushbutton unit with button Illuminated pushbutton unit with button 3S3201-0AA S3201-0AA21 3S3201-0AA31 3S3201-0AA41 3S3201-0AA51 3S3201-0AA61 Illuminated pushbutton 1) 1 NC } 3S3246-0AA with button 1) 3S3245-0AA31 with integrated LED 1) } 3S3245-0AA41 UC 24 V 1) 3S3245-0AA51 3S3245-0AA61 1) } 3S3245-0AA71 1) 3S3247-0AA ) 3S3247-0AA31 1) 3S3247-0AA41 1) 3S3247-0AA51 3S3247-0AA61 1) 3S3247-0AA71 1 with integrated LED 1) 1 NC 3S3250-0AA AC 110 V 1) 3S3257-0AA31 1) 3S3257-0AA41 1) 3S3257-0AA51 3S3257-0AA61 1) 3S3257-0AA71 1) 3S3251-0AA ) 3S3251-0AA31 1) 3S3251-0AA41 1) 3S3251-0AA51 3S3251-0AA61 1) 3S3251-0AA71 with integrated LED 1) 1 NC } 3S3254-0AA AC 230 V 1) 3S3253-0AA31 1) } 3S3253-0AA41 1) 3S3253-0AA51 3S3253-0AA61 1) } 3S3253-0AA71 1) 3S3255-0AA ) 3S3255-0AA31 1) 3S3255-0AA41 1) 3S3255-0AA51 3S3255-0AA61 1) 3S3255-0AA71 with A 9s lamp holder 1) 1 NC 3S3207-0AA without lamp 1) 3S3206-0AA31 1) 3S3206-0AA41 1) 3S3206-0AA51 3S3206-0AA61 1) 3S3206-0AA71 1) 3S3205-0AA ) 3S3205-0AA31 1) 3S3205-0AA41 1) 3S3205-0AA51 3S3205-0AA61 1) 3S3205-0AA71 1) Inscription by inserting a label is possible. 9/20

5 G-PRÜFZERT Pushbutton Units and Indicator Lights SIGNUM 3S3, Complete units Mushroom pushpull-button unit Mushroom push-pull button unit, 40 mm, latching, unlatching by pulling actuator/ Lock No. Contacts for frontplate mounting } Prefer type 1 NC } 3S CA S CA Selector switch nsd0560g Selector switch, 2 switching positions Switching sequence O I, operating angle 50 latching 00439g } 3S KA } 3S KA nsd0041g Selector switch, 3 switching positions Switching sequence I O II, operating angle 2 50 latching, } 3S DA , 3S DA g non-latching, } 3S EA , 3S EA g RONIS key operated switch RONIS key-operated switch,, 2 switching positions Switching sequence O I, latching, with key removable in any position, 50 operating angle S 30 } 3S AD S AD g nsd0042g EMERGENCY-STOP mushroom pushbutton unit EMERGENCY-STOP command devices acc. to EN 418 with backing plate, 80 mm, labelled, can also be used with 3TK28 contactor safety combinations (see Part 8) EMERGENCY-STOP mushroom pushbutton unit, 40 mm, with positive latching function, with turn unlatching mechanism } 3S HA NC A 3S HA nsd0045g bg Positive opening acc. to IEC , Appendix K, and DIN VDE 0660 Part /21

6 SIGNUM 3S3, Complete units Indicator light with smooth lens lens Operational volt- age } Prefer type Indicator light with smooth lens with integrated LED } 3S3244-6AA UC 24 V 3S3244-6AA30 } 3S3244-6AA40 3S3244-6AA50 3S3244-6AA60 } 3S3244-6AA70 with integrated LED 3S3248-6AA AC 110 V 3S3248-6AA30 3S3248-6AA40 3S3248-6AA50 3S3248-6AA60 3S3248-6AA70 with integrated LED } 3S3252-6AA AC 230 V 3S3252-6AA30 } 3S3252-6AA40 3S3252-6AA50 3S3252-6AA60 } 3S3252-6AA70 with A 9s lamp holder 3S3204-6AA without lamp 3S3204-6AA30 3S3204-6AA40 3S3204-6AA50 3S3204-6AA60 3S3204-6AA70 Indicator light with lens with concentric rings with integrated LED } 3S3244-6A UC 24 V 3S3244-6A30 } 3S3244-6A40 3S3244-6A50 3S3244-6A60 } 3S3244-6A70 Indicator light with lens with concentric rings with integrated LED 3S3248-6A AC 110 V 3S3248-6A30 3S3248-6A40 3S3248-6A50 3S3248-6A60 3S3248-6A70 with integrated LED } 3S3252-6A AC 230 V 3S3252-6A30 } 3S3252-6A40 3S3252-6A50 3S3252-6A60 } 3S3252-6A70 with A 9s lamp holder - } 3S3204-6A without lamp 3S3204-6A30 } 3S3204-6A40 3S3204-6A50 3S3204-6A60 } 3S3204-6A70 Audible signal device, IP 65 1 ) Continuous tone (2.4 khz) UC 24 V 3S3233-7A Min. operational current 10 ma UC 115 V 3S3234-7A10 Min. sound pressure 80 d/10 cm 230 V AC/ 3S3235-7A10 DC Audible signal device Drive for potentiometer 1 ) 2 ) 3S1000-7CH Drive for potentiometer 1) Cannot be used with 3S38 enclosures. 2) The potentiometer is not included in the scope of supply. 9/22

7 SIGNUM 3S3, Pushbuttons and switches Pushbutton with button actuator Inscription } Prefer type Pushbutton } 3S3000-0AA with button } 3S3000-0AA21 3S3000-0AA31 } 3S3000-0AA41 3S3000-0AA51 } 3S3000-0AA61 grey 3S3000-0A51 2) 3S3000-0AA71 Inscription I 3S3000-0AA81 Inscription O 3S3000-0A01 Inscription I 3S3000-0A11 Inscription O 3S3000-0A21 Pushbutton 3S3000-0A with raised button 3S3000-0A21 3S3000-0A31 3S3000-0A51 3S3000-0A61 Pushbutton with raised button Pushbutton, locking } 3S3000-0CA with raised button, 3S3000-0CA21 can be locked by depressing and turning clockwise; unlocking by turning anticlockwise Pushbutton with raised button, locking Pushbutton 3S3000-0AA with raised front ring 3S3000-0AA22 (Height 13 mm) 3S3000-0AA32 3S3000-0AA42 3S3000-0AA52 3S3000-0AA62 Pushbutton with raised front ring Pushbutton with raised front ring (castell.) Illuminated pushbutton with button Pushbutton 3S3000-0AA with raised front ring 3S3000-0AA with castellations, 3S3000-0AA (Height 13 mm) 3S3000-0AA Illuminated pushbutton 2) } 3S3001-0AA with button yell. 2) } 3S3001-0AA incl. holder for 3 elements 2) } 3S3001-0AA ) } 3S3001-0AA S3001-0AA ) } 3S3001-0AA Illuminated pushbutton 3S3001-0A with raised button 3S3001-0A incl. holder for 3 elements 3S3001-0A S3001-0A S3001-0A Pushbutton, latching, 3S3000-0DA with button 3S3000-0DA unlatching by repeated 3S3000-0DA pressing 3S3000-0DA S3000-0DA S3000-0DA grey 3S3000-0D51 Illuminated pushbutton, 2) 3S3001-0DA latching, yell. 2) 3S3001-0DA with button 2) 3S3001-0DA incl. holder for 3 elements, 2) 3S3001-0DA unlatching by repeated 2) 3S3001-0DA pressing 2) 3S3001-0DA Illuminated pushbutton with raised button 1)Also available without holder. Supplement Order No. with Z and quote order code 01. 2) Inscription by inserting a label is possible. Only supplied in packings 9/23

8 SIGNUM 3S3, Pushbuttons and switches Mushroom pushbutton, Ø 30 mm actuator } Prefer type Mushroom pushbutton, Ø 30 mm 3S3000-1DA S3000-1DA21 3S3000-1DA31 3S3000-1DA41 Mushroom pushbutton, Ø 40 mm } 3S3000-1GA } 3S3000-1GA21 3S3000-1GA31 3S3000-1GA41 Illuminated mushroom pushbutton, 3S3001-1DA Ø 30 mm 3S3001-1DA incl. holder for 3 elements 3S3001-1DA Illuminated mushroom pushbutton, 3S3001-1GA Ø 40 mm 3S3001-1GA41 incl. holder for 3 elements 3S3001-1GA61 Mushroom pushbutton, Ø 40 mm Push-pull button 3S3000-1EA Ø 30 mm, latching 2) 3S3000-1EA unlatching by pulling Illuminated mushroom pushbutton, Ø 30 mm Push-pull button } 3S3000-1CA Ø 40 mm, latching } 3S3000-1CA21 unlatching by pulling Illuminated mushroom pushbutton, Ø 40 mm Push-pull button, Ø 30 mm, 3S3001-1EA latching, illuminated 3S3001-1EA incl. holder for 3 elements, 3S3001-1EA unlatching by pulling 3S3001-1EA51 3S3001-1EA Push-pull button, Ø 30 mm Push-pull button, Ø 40 mm 3S3001-1CA latching, illuminated 3S3001-1CA31 incl. holder for 3 elements, 3S3001-1CA41 unlatching by pulling 3S3001-1CA51 3S3001-1CA71 Push-pull button, Ø 40 mm 1) Also available without holder. Supplement Order No. with Z and quote order code 01. 2) Maximum components provided: 3 single pole or 2 double-pole contact elements. When using the 3S A holder, the central command position must not be empty. 9/24 Only supplied in packings

9 SIGNUM 3S3, Selector switches Selector switch nsd0059g Illuminated selector switch nsd0060g Selector switches with 2 switching positions 00439g 00438g Switching sequence O I, latching, 50 operating angle Switching sequence O I, non-latching (return from the right), 50 operating angle actuator non-illuminated illuminated with holder for 3 elements non-illuminated illuminated with holder for 3 elements Selector switches with 3 switching positions 00448g 00445g 00446g Switching sequence I O II, latching, Switching sequence I O II, non-latching (return from the right and left, Switching sequence I O II, latching to the right, non-latching to the left (return from the left), non-illuminated illuminated with holder for 3 elements non-illuminated illuminated with holder for 3 elements nonilluminated 2 ) } Prefer type } } } } } 3S KA11 3S KA21 3S KA41 3S KA61 3S KA21 3S KA31 3S KA41 3S KA51 3S KA71 3S LA11 3S LA21 3S LA41 3S LA61 3S LA21 3S LA31 3S LA41 3S LA51 3S LA71 3S DA11 3S DA21 3S DA41 3S DA61 3S DA21 3S DA31 3S DA41 3S DA51 3S DA71 3S EA11 3S EA21 3S EA41 3S EA61 3S EA21 3S EA31 3S EA41 3S EA51 3S EA71 3S GA11 3S GA21 3S GA41 3S GA g Switching sequence I O II, latching to the left, non-latching to the right (return from the right), nonilluminated 2 ) 3S FA11 3S FA21 3S FA41 3S FA61 1) Also available without holder. When ordering, append Z to the order number and specify order code 01. 2) Also available as illuminated selector switch. When ordering, append Z to the order number and specify illuminated selector switch and the colour in plain text. Only supplied in packings 9/25

10 SIGNUM 3S3, Key operated switches RONIS key operated switch nsd0063g CES key operated switch nsd0562g IKON key operated switch nsd0563g KS key operated switch nsd0564g O.M.R. key operated switch nsd0067g Type Lock No./ colour Key removable in position Key operated switches with 2 keys and 2 switching positions 00439g 00444g 00441g Switching sequence O I, latching, 50 operating angle Switching sequence O I, latching, 50 operating angle Switching sequence O I, non-latching (return from the right), 50 operating angle RONIS RONIS } Prefer type S 30 O+I } 3S HD O } 3S HD01 I 3S HD21 S 30 O+I } 3S AD O } 3S AD01 I 3S AD21 CES SSG 10 O+I } 3S LD O } 3S LD01 I 3S LD21 LSG 1 O+I 3S LF01 O 3S LF11 IKON K1 O+I 3S LD O 3S LD01 KS O+I 3S AD O 3S AD01 I 3S AD21 E1 for VW 2 ) O+I 3S AE01 O 3S AE11 E2 for VW 2 ) O+I 3S AE21 O 3S AE31 E7 for VW 2 ) O+I 3S AE41 O 3S AE51 E9 for VW 2 ) O+I 3S AE61 O 3S AE71 O.M.R O+I 3S AG light O 3S AG O+I 3S AH11 O 3S AH01 I 3S AH21 O+I 3S AJ11 O 3S AJ01 O+I 3S AK11 O 3S AK01 RONIS S 30 O } 3S D CES SSG 10 O } 3S MD LSG 1 O A 3S MF11 IKON K1 O 3S MD KS O 3S D O.M.R. 3 ) light O 3S G O 3S H01 O 3S J01 O 3S K01 For special designs, see page 9/29. 1) Also available without holder. When ordering, append Z to the order number and specify order code 01. 2) Supplied without key. 3) In accordance with FIAT car company standards, can also be used by other users. 9/26

11 SIGNUM 3S3, Key operated switches RONIS key operated switch nsd0063g CES key operated switch Type Lock No./ colour Key removable in position Key operated switches with 2 keys and 3 switching positions 00448g Switching sequence I O II, latching, RONIS S 30 O+I+II 3S DD O 3S DD01 I+II 3S DD41 I 3S DD21 II 3S DD31 O+I 3S DD51 CES SSG 10 O+I+II 3S PD O 3S PD01 I+II 3S PD41 I 3S PD21 II 3S PD31 IKON K1 O+I+II 3S PD nsd0562g IKON key operated switch nsd0563g KS key operated switch 00445g KS O+I+II 3S DD O 3S DD01 II 3S DD31 O.M.R I+O+II 3S DG ) light O 3S DG I+O+II 3S DH11 O 3S DH I+O+II 3S DJ11 O 3S DJ I+O+II 3S DK11 O 3S DK01 Switching sequence RONIS S 30 O 3S ED I O II, non-latching (return from right and left), CES SSG 10 O 3S QD IKON K1 O 3S QD KS O 3S ED nsd0564g O.M.R. 2 ) light O 3S EG O 3S EH01 O 3S EJ01 O 3S EK01 O.M.R. key operated switch nsd0067g For special designs, see page 9/29. 1) Also available without holder. When ordering, append Z to the order number and specify order code 01. 2) In accordance with FIAT car company standards, can also be used by other users. 9/27

12 SIGNUM 3S3, Key operated switches RONIS key operated switch nsd0063g CES key operated switch Type Lock No./ colour Key removable in position Key operated switches with 2 keys and 3 switching positions 00446g 00447g Switching sequence I O II, latching to the right, non-latching to the left (return from the left), Switching sequence I O II, latching to the left, non-latching to the right (return from the right), RONIS S 30 O+II 3S GD O 3S GD01 II 3S GD31 CES SSG 10 O+II 3S SD O 3S SD01 II 3S SD31 KS O 3S GD RONIS S 30 O+I 3S FD O 3S FD01 I 3S FD21 CES SSG 10 O+I 3S RD O 3S RD01 I 3S RD21 IKON K1 O+I 3S RD nsd0562g IKON key operated switch KS O+I 3S FD O 3S FD01 I 3S FD21 O.M.R O 3S FG light I 3S FG I 3S FJ21 nsd0563g KS key operated switch nsd0564g O.M.R. key operated switch nsd0067g For special designs, see page 9/29. 1) Also available without holder. When ordering, append Z to the order number and specify order code 01. 9/28

13 SIGNUM 3S3, Key operated switches Special locks for keyswitches Special locks, which are listed in the table below. The average delivery time is 5 working days. In this case, append Z, the order code and the desi key operated switch number to the order number. Ordering example 3S LD01 Z Z = SSG11 Note For applications in which access security is important and several key operated switch numbers are used, we recommend the use of KS, CES or IKON locks. Order No. Possible special Order No. Possible special Order No. Possible special Code locks locks locks 3S3... 4AD.. Z 3S3... 4D.. Z 3S3... 4DD.. Z 3S3... 4ED.. Z 3S3... 4GD.. Z 3S3... 4FD.. Z 3S3... 1A20 Z S31 to S49, T421 to T455, T458 S31 to S49, T421 to T455, T458 3S3... 4LD.. Z 3S3... 4MD.. Z 3S3... 4PD.. Z 3S3... 4QD.. Z 3S3... 4SD.. Z 3S3... 4RD.. Z 3S3... 1KA20 Z SSG 11 to SSG 15 SSP 9 3S3... 5AD.. Z 3S3... 5D.. Z 3S3... 5DD01 Z 3S3... 5DD11 Z 3S3... 5DD41 Z 3S3... 5ED.. Z 3S3... 5GD01 Z 3S3... 5FD01 Z 3S3... 5FD51 Z 3S3... 1LA20 Z E1, E2, E7, E9 E 9 E2, E7, E9 Special locks which are not listed in the above table. The average delivery time is 25 working days. In this case, append Z, the order code Y01 and the desi key operated switch number to the order number. Ordering example 3S LD01 Z Y01 Z = SSG18 Note Special locks for VW (E1, E2,...) will be delive without keys, all others with 2 keys. Master and pass key systems Safety key operated switch actuators with KS, CES, IKON and O.M.R. can be supplied for use with: central key operated switch systems, master key systems, central master key systems, master pass key systems. Example of master pass-key system Please enquire for price and delivery time. 9/29

14 G-PRÜFZERT G-PRÜFZERT G-PRÜFZERT G-PRÜFZERT G-PRÜFZERT Pushbutton Units and Indicator Lights SIGNUM 3S3, EMERGENCY-STOP mushroom pushbuttons EMERGENCY-STOP mushroom pushbutton actuator, key withdrawable in position } Prefer type EMERGENCY-STOP command devices according to EN 418, 2 ), can also be used with 3TK28 contactor safety combinations (see Section 8) Mushroom pushbutton, 40 mm, with positive latching function unlatching by turning the knob to the left } 3S HA nsd0068g Mushroom pushbutton, 40 mm, with positive latching function, with RONIS lock Lock No. S 30, supplied with 2 keys, unlocking only possible using key ON/OFF S A EMERGENCY-STOP mushroom pushbutton with lock Mushroom pushbutton, 40 mm, with positive latching function, with CES lock Lock No. SSG 10, supplied with 2 keys, unlocking only possible using key ON/OFF S KA nsd0069g Mushroom pushbutton, 40 mm, with positive latching function, with KS lock Lock No. S1, supplied with 2 keys, unlocking only possible using key ON/OFF S LA Mushroom pushbutton, 40 mm, with positive latching function, with O.M.R. lock Lock No , supplied with 2 keys, unlocking only possible using key ON/OFF S MA Indicator lights and audible signal devices lens Indicator light nsd0565g Audible signal device nsd0071g Indicator light } Prefer type with smooth lens } 3S AA S AA30 } 3S AA40 3S AA50 3S AA60 } 3S AA70 with lens with concentric rings 3S A S A30 3S A40 3S A50 3S A60 3S A70 Audible signal device, IP 40 3 ) for audible signal transducer DC 24V 4 ) with A 9s holder 3S AA ) Also available without holder. When ordering, append Z to the order number and specify code 01. 2) The backing plate must be orde separately; see page 9/57. 3) Audible signal device, IP 65, see page 9/22. 4) Audible signal transducer must be orde separately when using the 3S A lampholder; see page 9/58. 9/30 Only supplied in packings

15 SIGNUM 3S3, Twin pushbuttons Colour Twin pushbutton with buttons Twin pushbutton, IP 65, with buttons 2 ) / inscription I/O 3S AC / inscription I/O 3S AC31 Twin pushbutton, IP 65, with and raised buttons 2 ) / inscription I/O 3S CC nsd0072g / inscription I/O 3S CC31 Twin pushbutton with indicator light, with and raised buttons Twin pushbutton with indicator light, IP 65, with buttons 2 ) incl. holders for 3 elements / inscription I/O / inscription I/O 3S C S C31 Twin pushbutton with indicator light, IP 65, with and raised buttons 2 ) incl. holder for 3 elements / inscription I/O / inscription I/O 3S DC S DC31 nsd0073g Accessories Inscription plate Label holder, 30 mm x 70 mm, for inscription plate 12.5 mm x 27 mm 3 ) 3S AY 10 nsd0074g Protective cap Protective cap,, silicone, for degree of protection IP 67, can be used for twin pushbutton with buttons 3S AQ 1 nsd0075g 1) Also available without holder. When ordering, append Z to the order number and specify code 01. 2) lack inscription with, and buttons, inscription with buttons. 3) For inscription plates, see pages 9/54 and 9/55. Only supplied in packings 9/31

16 G-PRÜFZERT Pushbutton Units and Indicator Lights SIGNUM 3S3, Complete units Square Programme, 26 mm 26 mm Pushbutton unit nsd0076g Illuminated pushbutton unit nsd0077g EMERGENCY-STOP mushroom pushbutton unit Pushbutton units with button Illuminated pushbutton units with button with integrated LED AC/DC 24 V with integrated LED AC 230 V actuator 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) with A 9s lamp holder 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) 1 ) Contacts for front plate mounting version 1 NC 1 NC 1 NC 1 NC 1 NC 3S AA11 3S AA11 3S AA21 3S AA31 3S AA41 3S AA51 3S AA61 3S AA11 3S AA21 3S AA31 3S AA41 3S AA51 3S AA61 3S AA21 3S AA31 3S AA41 3S AA51 3S AA61 3S AA71 3S AA21 3S AA31 3S AA41 3S AA51 3S AA61 3S AA71 3S AA21 3S AA31 3S AA41 3S AA51 3S AA61 3S AA71 3S AA21 3S AA31 3S AA41 3S AA51 3S AA61 3S AA71 3S AA21 3S AA31 3S AA41 3S AA51 3S AA61 3S AA71 3S AA21 3S AA31 3S AA41 3S AA51 3S AA61 3S AA EMERGENCY-STOP command devices according to EN 418 with backing plate, 80 mm, labelled, can also be used with 3TK28 contactor safety combinations (see Section 8) Mushroom pushbutton, 40 mm, with positive latching function, unlatching by turning 3S HA S HA nsd0078g bg ) Inscription by inserting a label is possible. 9/32

17 SIGNUM 3S3, Square Programme, 26 mm 26 mm Complete units lens Indicator light Indicator light with integrated LED AC/DC 24 V 3S AA20 3S AA30 3S AA40 3S AA50 3S AA60 3S AA nsd0079g with integrated LED AC 230 V 3S AA20 3S AA30 3S AA40 3S AA50 3S AA60 3S AA with A 9s lamp holder 3S AA20 3S AA30 3S AA40 3S AA50 3S AA60 3S AA Pushbuttons actuator Pushbutton Pushbutton with button 2 ) 3S AA11 3S AA21 3S AA31 3S AA41 3S AA51 3S AA61 3S AA nsd0080g Pushbutton with raised front ring (Height 13 mm) 3S AA12 3S AA22 3S AA Pushbutton with raised front ring with castellations (height 13 mm) 3S AA13 3S AA33 3S AA Illuminated pushbutton Illuminated pushbutton with button incl. holder for 3 elements 2 ) yell. 2 ) 2 ) 2 ) 2 ) 3S AA21 3S AA31 3S AA41 3S AA51 3S AA61 3S AA nsd0081g 1) Also available without holder. When ordering, append Z to the order number and specify code 01. 2) Inscription by inserting a label is possible. Only supplied in packings 9/33

18 SIGNUM 3S3, Pushbutton switches and selector switches Square Programme, 26 mm 26 mm actuator Pushbutton switch Pushbutton switch, latching, with button unlatching by pressing again 3S DA11 3S DA21 3S DA31 3S DA41 3S DA51 3S DA nsd0080g Illuminated pushbutton switch Illuminated pushbutton switch, latching, with button incl. holder for 3 elements unlatching by pressing again Selector switches with 2 switching positions Switching sequence O I, latching, 50 operating angle 00439g 2 ) yell. 2 ) 2 ) 2 ) 2 ) non-illuminated 3S DA21 3S DA31 3S DA41 3S DA51 3S DA61 3S DA71 3S KA11 3S KA21 3S KA41 3S KA Selector switch nsd0081g illuminated incl. holder for 3 elements 3S KA21 3S KA31 3S KA41 3S KA51 3S KA71 nsd0084g Illuminated selector switch Switching sequence O I, non-latching (return from the right), 50 operating angle 00438g non-illuminated illuminated incl. holder for 3 elements 3S LA11 3S LA21 3S LA41 3S LA61 3S LA21 3S LA31 3S LA41 3S LA51 3S LA71 Selector switches with 3 switching positions nsd0085g 00448g Switching sequence I O II, latching, 2 x 50 operating angle non-illuminated illuminated incl. holder for 3 elements 3S DA11 3S DA21 3S DA41 3S DA61 3S DA21 3S DA31 3S DA41 3S DA51 3S DA g Switching sequence I O II, non-latching (return from the right and left), non-illuminated illuminated incl. holder for 3 elements 3S EA11 3S EA21 3S EA41 3S EA61 3S EA21 3S EA31 3S EA41 3S EA51 3S EA g Switching sequence I O II, latching to the right, non-latching to the left (return from the left), nonilluminated 3 ) 3S GA11 3S GA21 3S GA41 3S GA g Switching sequence I O II, latching to the left, non-latching to the right (return from the right), nonilluminated 3 ) 3S FA11 3S FA21 3S FA41 3S FA61 1) Also available without holder. When ordering, append Z to the order number and specify code 01. 2) Inscription by inserting a label is possible. 3) Also available as illuminated selector switch. Append Z to the order number and specify illuminated selector switch and the colour in plain text. 9/34 Only supplied in packings

19 SIGNUM 3S3, Square Programme, 26 mm 26 mm Key operated switches RONIS key operated switch nsd0086g Type Lock No./ colour Key removable in position Key operated switches with 2 keys and 2 switching positions 00444g Switching sequence O-I, latching, 50 operating angle RONIS S 30 O+I 3S AD O 3S AD01 I 3S AD21 CES SSG 10 O+I 3S LD O 3S LD01 I 3S LD21 LSG 1 O 3S LF11 IKON K1 O 3S LD CES key operated switch nsd0566g O.M.R. key operated switch 00441g Switching sequence O I, non-latching (return from the right), 50 operating angle KS O+I 3S AD O 3S AD01 E1 for VW 2 ) O+I 3S AE01 E2 for VW 2 ) O 3S AE31 E7 for VW 2 ) O+IO 3S AE41 O 3S AE51 E9 for VW 2 ) O 3S AE71 O.M.R. 3 ) light O+I 3S AG O 3S AG01 O+I 3S AH11 O 3S AH01 O+I 3S AJ11 O 3S AJ01 O+I 3S AK11 O 3S AK01 RONIS S 30 O 3S D CES SSG 10 O 3S MD IKON K1 O 3S MD KS O 3S D nsd0088g For special designs, see page 9/29. O.M.R. 3 ) O 3S J ) Also available without holder. When ordering, append Z to the order number and specify code 01. 2) Supplied without the key. 3) In accordance with FIAT car company standards, can also be used by other users. 9/35

20 SIGNUM 3S3, Key operated switches Square Programme, 26 mm 26 mm RONIS key operated switch nsd0086g CES key operated switch Type Lock No./ colour Key removable in position Key operated switches with 2 keys and 3 switching positions 00448g 00445g Switching sequence I O II, latching, 2 x 50 operating angle Switching sequence I O II, non-latching (return from the right and left), RONIS S 30 I+O+II 3S DD O 3S DD01 I+II 3S DD41 CES SSG 10 I+O+II 3S PD O 3S PD01 O.M.R. 2 ) RONIS O 3S DH I+O+II 3S DJ11 O 3S DJ01 S 30 O 3S ED CES SSG 10 O 3S QD IKON K1 O 3S QD g Switching sequence I O II, latching to the right, non-latching to the left (return from the left), CES SSG 10 O 3S SD nsd0566g O.M.R. key operated switch 00447g Switching sequence I O II, latching to the left, non-latching to the right (return from the right), RONIS S 30 O 3S FD CES SSG 10 O+I 3S RD KS I 3S FD nsd0088g For special designs, see page 9/29. 1) Also available without holder. When ordering, append Z to the order number and specify code 01. 2) In accordance with FIAT car company standards, can also be used by other users. 9/36

21 G-PRÜFZERT G-PRÜFZERT G-PRÜFZERT G-PRÜFZERT G-PRÜFZERT Pushbutton Units and Indicator Lights SIGNUM 3S3, Square Programme, 26 mm 26 mm EMERGENCY-STOP mushroom pushbuttons EMERGENCY-STOP mushroom pushbutton actuator, key withdrawable in position EMERGENCY-STOP command devices according to EN 418, 2 ), can also be used with 3TK28 contactor safety combinations (see Section 8) Mushroom pushbutton, Ø 40 mm, with positive latching unlatching when turned to the left 3S HA nsd0089g Mushroom pushbutton, Ø 40 mm, with positive latching function, with RONIS lock Lock No. S 30, supplied with 2 keys, unlatching only by using the key ON/OFF S A EMERGENCY-STOP mushroom pushbutton with lock Mushroom pushbutton, Ø 40 mm, with positive latching function, with CES lock Lock No. SSG 10, supplied with 2 keys, unlatching only by using the key ON/OFF S KA nsd0090g Mushroom pushbutton, Ø 40 mm, with positive latching function, with KS lock Lock No. S1, supplied with 2 keys, unlatching only by using the key ON/OFF S LA Mushroom pushbutton, Ø 40 mm, with positive latching function, with O.M.R. lock Lock No , supplied with 2 keys, unlatching only by using the key ON/OFF S MA Indicator lights lens Indicator light Indicator light 3S AA S AA30 3S AA40 3S AA50 3S AA60 3S AA70 nsd0091g 1) Also available without holder. When ordering, append Z to the order number and specify code 01. 2) The backing plate must be orde separately; see page 9/57. Only supplied in packings 9/37