BLITZ 60L - BLITZ 55 - BLITZ 50. Double head sawing machine with motorized movement of the mobile head and electronic control of the head tilting
|
|
- Richard Edmund Johnson
- 6 years ago
- Views:
Transcription
1 BLITZ 60L - BLITZ 55 - BLITZ 50 Double head sawing machine with motorized movement of the mobile head and electronic control of the head tilting 12/08/ Page 1 of 12
2 Technical specifications: First head fixed, second head mobile with automatic positioning. Positioning carried out by servomotor and reducer with centesimal precision Minimum cut at 90 between the two heads: 350 mm (can be reduced with dedicated software, optional) Maximum cutting distance between the two heads: m. depending on the version supplied (can be increased with dedicated software, optional) Motor-driven cutting head tilted by means of a recirculating ball screw and nut offering high precision, repeatability and reliability Cutting angles vary according to the machine model, with electronic control of all graduations: - from 10 to 135 Blitz 50 - from 12 to 135 Blitz 55 - from 20 to 135 Blitz 60 L Accuracy to 2' of a degree No. 2 tungsten carbide saw blades ø 500 (Blitz 50)/550 (Blitz 55)/600 (Blitz 60L) mm according to machine model Oleo-pneumatic blade exit speed control (adjustable blade exit speed - rapid retraction) Blade exit speed regulator with numerical indicator Cutting area guard kit No. 4 horizontal vices which have a patented push system with a vertical component to guarantee contact with the machine horizontal table No. 2 vertical vices on internal side of the blade, automatically excludible for cuts with internal angles between 90 and 135 Movable head roller table (2.5 m.) Micro-drop pure oil blade lubrication system Direct motor to blade transmission Blade motors, three-phase 2.2 kw (3HP) 2800 rpm. Euro voltage 230/400V 50Hz; 275/480V 60 Hz Electric panel separate from pneumatic panel in lateral position Set-up for the installation of a chips and fumes extraction system Horizontal profile support tables in ground hardened steel and vertical in stainless steel (replaceable) Large size swarf collection box to allow easy collection Set up for the installation of a central motor-driven conveyor belt for collecting waste material and chips including inclined end Real time control of functions by NC Working pressure: 7 bar Air consumption per cycle 53 NL/cycle Touch-screen consolle for E and C versions Cable-carrying chain to the console located inside the base. The possibility of breakage is reduced helping the operator during the bar loading and piece offloading operations Flashing lights to warn when the machine is in operation Electric brake to stop the blade in less than 10 seconds 12/08/ Page 2 of 12
3 Standard accessories: No. 2 tungsten carbide saw blades ø 500 (Blitz 50)/550 (Blitz 55)/600 (Blitz 60L) mm according to machine model Cutting area guard kit Movable head roller table (2.5 m.) No. 4 horizontal vices inside blade No. 2 vertical vices inside blade Micro-drop pure oil blade lubrication system Set-up for the installation of a chips and fumes extraction system FSTCut software licence USB port for data input from external software Set-up for Ethernet connection Teleservice contract for single machine (not available for version C, standard for version E) 12/08/ Page 3 of 12
4 Cutting diagram BLITZ 50 12/08/ Page 4 of 12
5 BLITZ 55 12/08/ Page 5 of 12
6 BLITZ 60L 12/08/ Page 6 of 12
7 MINIMUM CUTS* FIXED HEAD POSITION internal 45 external 45 external 10 external 12 external 20 external internal MOBILE HEAD MINIMUM DISTANCE BETWEEN POSITION HEADS (MINIMUM CUT) MM internal 45 external 45 external 10 external 12 external 20 external 45 internal NOTES Blitz 60L Blitz 60L Blitz Blitz 60L Blitz 50 Blitz 55 Blitz 60L Blitz 60L Blitz 60L *minimum cut is the blades distance measured internally between the two heads and at height 0 relative to the referential horizontal plane 12/08/ Page 7 of 12
8 Control unit TEX COMPUTER GRAPHICS (E) Electronic equipment description: Touch monitor 15'' LED backlighting Sliding control panel onboard machine on linear guides 5-wire resistive Touch screen Standard mouse and keyboard placed in a compartment under the display Kit label printing device (optional) NC box Power-E PC - HP ultra SLIM Solid State Drive 80 GByte Processor Intel Core i3-3,3ghz, cache 3 MB 2 GB Memory SDRAM DDR3 Operating system Windows 7 Professional 3-year warranty ''on site'' International Internal USB ports plus one IP65 on front panel LAN connection kit including Ethernet board FSTCUT software Teleservice 12/08/ Page 8 of 12
9 Description of functions and characteristic FSTCUT program: Semiautomatic cutting function with automatic profile height compensation, extrusion tolerance and piece counter with cutting disabling Direct import of DXF format Profiles archive can be organised by brand and by series. 2D display of the DXF associated with the profile and management of machining parameters associated with the profile Management of list filing folders with paths that can also be configured online Cutting lists imported via network or USB memory stick Cutting optimisation for lists Management of cutting statistics and blade wear Coating thickness and extrusion tolerance automatic corrector function Displaying 3D of profile Compatible with the format FOM FST datas (protocol P2K2) In the event of integration with FOM-FST frame designing programs, the element being machined is displayed on screen in a 2D graphic plan of the frame it is associated with Porgram for under size cuts Control of manual cutting lists Managing of users Management of profile colour archive Display of profile sections while executing cutting lists with indications of piece positioning on the machine Possibility of printing profile sections Possibility of printing profile sections and layout of the associated frame (only with cutting lists originating from Fom programs) Teleservice 12/08/ Page 9 of 12
10 SILVER (C) Electronic equipment description: Industrial numerical control built into cabinet with remote controlled 5-wire resistive Touch screen display on the control panel 15 LCD colour graphic display LAN connection kit including Ethernet board USB port for archive management of data and parameters The USB port is also used for managing cutting lists from control software (No. 1 USB key included) CD with software to install in customer s PC in office dedicated to managing and converting cutting lists and DXF Software description: FOM Multitasking Operating System with user graphic interface with window menu and icons Cutting lists imported via network or USB memory stick Profile archive with assignment to the various work parameters and to profile-shaped sections with the possibility of importing real DXF type profile sections by means of converter offered as standard with the machine Semiautomatic cutting function with automatic profile height compensation, extrusion tolerance and piece counter with cutting disabling Display of profile sections while executing cutting lists with indications of piece positioning on the machine (only with cutting lists originating from Fom programs) Possibility of highlighting on monitor the element being machined in a graphic representation of the associated frame (only with cutting lists originating from Fom programs) Formulae & Type software for up to 6 variables where each element is assigned a description of the machining operations to be performed Possibility to work more types simultaneously with cut optimisation Software for shuttering and English-style door Software for creating glazing and/or panel lists Software for entering cutting lists manually from keyboard 12/08/ Page 10 of 12
11 Optionals: Profile clamping (profile type to be specified) No. 4 Blade exit position transducer kit Blade rotation inverter kit Note: with standard voltages only Loading roller table 3 m. Loading roller table 4,2 m. Retractable pneumatic intermediate profile support kit Note: indicate whether it should be positioned as 1st or 2nd support Kit of receding external profile support (LH) for machines with 5 Mt. cutting length (to be fixed on the floor outside the machine) Receding external profile support (LH) for machines with 6.6 m. cutting length Adjustable clamping pad for vertical vice Adjustable double buffer kit for vertical vice Automatic profile height measuring device with lower mobile sensor + vertical vice Manual kit for under size cuts Intermediate profile lifter roller kit (for head loading area) Software licence for special cut-off (beyond measure and super minimum) and profile bevel cut for 45 cuttings Software licence kit for automatic step-by step cutting with photocells barrier Software licence kit for automatic step-by-step cutting with two-hand command key Software licence for conversion data not generated by FOM Programs Label printer Paper roll for printer; min. n. 10 pcs(58x35mm) Paper roll for printer; min. n. 10 pcs (100x36mm) (not available for version C, on request for version E) Teleservice contract for single machine (not available for version C, standard for version E) Kit for conveying chips to the middle of machine Swarf conveyor belt with inclined end (only for version 5 mt.)(unloading height 700 mm) Swarf conveyor belt with inclined end (only for version 6,6 mt.)(unloading height 700 mm) 5 m. integral guard system 6.6 m. integral guard system 12/08/ Page 11 of 12
12 Optional: Packing Crate packing - 5 m. Crate packing m. Working Cut 5 m. 6.6 m. A (mm) B (mm) /08/ Page 12 of 12 C (mm) Kg
ARES 30. Overall dimensions: A (mm) B (mm) C (mm) Kg
ARES 30 Numerically controlled copy router with -90, 0, +90 section rotation for working on 3 sides and quik release spinale for ISO 30 cone. Z axis manual down-feed with dimension display. The machine
More informationThe independent axes are controlled by brushless Yaskawa servomotors by means of:
ARGO 40 RM 1.0 BASIC SPECIFICATIONS 1.1 Structure The structure is made of a base with a sliding upright in its rear section. Both are in electrowelded steel duly stabilised after each work phase to ensure
More informationARGO 70 RM 1.0 BASIC SPECIFICATIONS. 1.1 Structure
ARGO 70 RM 1.0 BASIC SPECIFICATIONS 1.1 Structure The structure is made of a base with a sliding upright in its rear section. Both are in electrowelded steel duly stabilised after each work phase to ensure
More informationFLEN. CNC Machining Centre. A (mm) B (mm) C (mm) Kg
A (mm) B (mm) C (mm) Kg 8900 1750 2400 5300 1. Basic Specifications 1.1 Structure The structure is made of a base with a sliding upright in its rear section. Both are in electrowelded steel duly stabilised
More informationDALI 40. CNC Machining Centre. A (mm) B (mm) C (mm) Kg
A (mm) B (mm) C (mm) Kg 5591 1825 2341 2700 1. Basic Specifications 1.1. Structure The structure consists of a machine bed with a beam that slides across the top of it. Both parts are made of steel and
More informationDALI BASIC SPECIFICATIONS. 1.1 Structure
DALI 40 The Dali machining centre has been designed to perform boring and milling work on aluminium and PVC profiles. The mechanical specifications of this modern machining centre and of its control system
More informationDALI TECHNICAL CHARACTERISTICS
DALI 70 1. TECHNICAL CHARACTERISTICS The Dalì 70 machining centre has been designed to perform complex boring, milling and tapping operations on the three sides of aluminium or pvc. The mechanical specifications
More informationDG 142 DOUBLE MITRE SAW DOUBLE MITRE SAW DG 142. Description
DG 03.03.2016 12:59 Uhr Page 1 of 6 DG DOUBLE MITRE SAW DOUBLE MITRE SAW DG External-dimension cuts possible for all cutting variants Ideal machine for high-volume series production when cutting at 90
More informationHomag Single-Sided Edgebanding Machine, Model KAL 310/4/A20
Homag Single-Sided Edgebanding Machine, Model KAL 310/4/A20 The Homag KAL is a single-sided edgebanding machine for the application of coiled, strip, and solid wood band material. All stations are mounted
More informationThe independent axes are controlled by brushless Yaskawa servomotors by means of:
FLEN 1.0 BASIC SPECIFICATIONS 1.1 Structure The structure is made of a machine bed with a sliding carriage in its rear section. Both are in electrowelded steel duly stabilized after each work phase to
More informationHomag Single-Sided Softforming Machine, Model KLO 79/1/E12/S3
Tech. Spec. 14999 10/22/96 Homag Single-Sided Softforming Machine, Model KLO 79/1/E12/S3 The machine base is manufactured with a continuous machine frame, offtrim collection channel, centralized chip collection
More informationHOMAG Single-Sided Edgebanding Machine Model SE-9800/S2/CNC
Year 2000 Homag SE 9800 S2 Page 1 HOMAG Single-Sided Edgebanding Machine Model SE-9800/S2/CNC Working units on left-hand side as seen from the direction of infeed. Machine base manufactured with a continuous
More informationcnc serie 550 models customized housings, ready for installation on the machines tool cnc Serie Modules and interconnections
cnc serie 550 cnc serie 550 By developing the Serie 550, Esa/GV s intention was to update its range of numeric controls for press brakes, shears and plate rolls forming machines, true to its tradition
More informationPRECISION SURFACE GRINDING MACHINE
PRECISION SYSTEM 1 PRECISION SURFACE GRINDING MACHINE ACC 350 II Features : Powerful for precision grinding small component with minute, intricate like mold & die, jig & fixture etc. Operator centered
More informationd for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain
More information35 t Plus series. PLUS 35 t
35 t Plus series PLASTICS TECHNOLOGY INJECTION MOLDING TECHNOLOGY PLUS 35 t BATTENFELD Injection Molding Machines special features of the PLUS range THE PLUS Compact, powerful, profitable! The keyword
More informationMI-4 Melt Flow Indexer
Göttfert Werkstoff-Prüfmaschinen GmbH Siemensstraße 2 74722 Buchen E-Mail: info@goettfert.de Internet: http://www.goettfert.com WERKSTOFF-PRÜFMASCHINEN GMBH MI-4 Melt Flow Indexer This unique melt indexer
More informationGRM SERIES. Mechanical stamping and forming machines GRM 80E / GRM 80P
GRM SERIES Mechanical stamping and forming machines GRM 80E / GRM 80P More economical large-scale production Produce stamped and formed parts in large batches with even higher productivity. Benefit from
More informationHomag Double-Sided Automatic Edgebanding Machine, Model KAL 526/7/A12/25/S2
TECHNICAL SPECIFICATIONS PAGE 1 AUGUST 08, Homag Double-Sided Automatic Edgebanding Machine, Model KAL 526/7/A12/25/S2 Double-sided machine for edgebanding and post-processing of various coiled edge materials
More informationV2013NC V235 NC FNC 1P300FS VERTICAL MITRE SAWS PRECISION MITRE SAW SPECIALLY CONCEIVED FOR PICTURE FRAMES CUTTING.
V0NC V5 NC FNC VERTCL MTRE SWS P00FS PRECSON MTRE SW SPECLLY CONCEVED FOR PCTURE FRMES CUTTNG. V0 NC V5 NC VERTCL MTRE SWS utomatic cutting system for wood, PVC and aluminum profiles. The model V0NC has
More informationModel JET-1800 / 5 Axes CNC Machining Centre with Automatic Hopperfeed
Structure: The machine is composed by : A 900 mm wide stabilised and deeply ribbed frame, with constant section designed to grant the maximum rigidity and straightness of all the loading conditions in
More informationSBT SERIES. Swing Beam Touch Shear
SBT SERIES Swing Beam Touch Shear World s heaviest and most robust swing beam shear construction Proven reliable design frame with rigid swing style upper beam Optimized cutting angle for minimized distortion
More informationMI-3 Melt Flow Indexer
Göttfert Werkstoff-Prüfmaschinen GmbH Siemensstraße 2 74722 Buchen E-Mail: info@goettfert.de Internet: http://www.goettfert.com W E R K S T O F F - P R Ü F M A S C H I N E N G M B H MI-3 Melt Flow Indexer
More informationOPTIMUM PREMIUM CNC vertical machining center combines maximized productivity with low cost INCLUDING:
mill F 151HSC OPTIMUM PREMIUM CNC vertical machining center combines maximized productivity with low cost Heavy type High productivity The machine frame is analysed using FEM system to ensure optimum stability
More informationHEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
More informationKMH KMH1000/1250 HORIZONTAL MACHINING CENTERS
KMH KMH1000/1250 HORIZONTAL MACHINING CENTERS Index Cover 01 Cover Contents 02-03 Table of Contents Structure 04-07 Design & Rigidity 08-09 Main Sub-System 10 High Accuracy Inspection 11 Wash Down System
More informationHeight Gauges Pages Data Processing Height Gauges Pages
Height Gauges Height Gauges Pages 232-240 Data Processing Height Gauges Pages 241-244 for sale to the United Kingdom only. All products are intended to be sold to coercial customers. Therefore VAT is not
More informationV2013NC V235 NC FNC 1P300FS VERTICAL MITRE SAWS PRECISION MITRE SAW SPECIALLY CONCEIVED FOR PICTURE FRAMES CUTTING.
V03NC V35 NC FNC VERTCL MTRE SWS P300FS PRECSON MTRE SW SPECLLY CONCEVED FOR PCTURE FRMES CUTTNG. V03 NC V35 NC V35NC VERTCL MTRE SWS utomatic cutting system for wood, PVC and aluminum profiles. The model
More informationCNC Tube Bending Machine & its Software (On Turn key basis) SL. NO. DESCRIPTION OF REQUIREMENT REQUIRED 1 Scope
CNC Tube Bending Machine & its Software (On Turn key basis) Code No. PURPOSE: CNC tube bending machine for bending of MS/Al/SS tubes. SPECIFICATIONS: Qty. 01 Set SL. NO. DESCRIPTION OF REQUIREMENT REQUIRED
More informationPRESETTER SP40. Pesaro, September 2013
Pesaro, September 2013 1 PRESETTER SP40 TECHNICAL SPECIFICATIONS: AXIS DIMENSIONS: Diameter 600mm, Height XXXX mm MAIN STRUCTURE: Entirely made in C45 medium carbon steel it ensures greater strength and
More informationStronger, faster and. deeper bendings. 3 Axes (R Manual) CNC Press Brake. Stronger, faster and. deeper bendings;
3 Axes (R Manual) CNC Press Brake PowerBend Series machines were redesigned based on users preferences and it became unique machine with its electronic and mechanical features. Stronger, faster and deeper
More informationSTORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.
STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool
More informationroller shutters ALUMINIUM ROLLER SHUTTERS FOR SPECIAL VEHICLES
roller shutters ALUMINIUM ROLLER SHUTTERS FOR SPECIAL VEHICLES ROLLER SHUTTERS INTRODUCTION The main target of company SRS is to offer competence and reliability to the customers in the production of aluminium
More informationSystem concept. Hardware DATA SHEET VECTRON POS TOUCH 12 LIGHT
System concept The Vectron POS Touch 12 Light has been developed for the highest demands. Thanks to its outstanding features, Vectron POS Touch 12 Light is particularly suitable for use in difficult environments
More informationROLLER SHUTTER LOUVER WINDOWS. Contact us now for more information on Thailand or visit us at
The ONLY Roller Shutter With Adjustable Slats. More Than Just A Roller Shutter LLER SHUTTERS ROLLER SHUTTER LOUVER WINDOWS http://www.kssthailand.com 1 Roller Shutters With Adjustable Slats NEW to Thailand
More informationBUSCH. cutting material preparation outside the guillotine. JOGGER model series BR and BRA
BUSCH JOGGER cutting material preparation outside the guillotine» precise ream alignment» air removal roller for forming blocks of reams» productivity boost of the guillotine, due to continued cutting
More informationWorkholding. Workholding CHUCKS CENTRES 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS STEEL CENTRES 60º PLAINBACK FITTING CARBIDE CENTRES 60º
CENTRES CHUCKS STEEL CENTRES 60º 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS CARBIDE CENTRES 60º Taper Stock Code MT1 014-101 0.25kg MT2 014-102 0.25kg MT3 014-103 0.5kg MT4 014-104 1kg MT5 014-105 2.5kg
More informationKA3-6VS 300mm KA3-6VS 400mm Vertical Spindle
Vertical KA3-6VS 300mm KA3-6VS 400mm Vertical Spindle The Kira KA3- Series of traveling column (3) Axis CNC Machining Modules are an excellent choice for special application machine builders. These modules
More informationSTANDARD FEATURES with MXP-200FB (FANUC-32i)
STANDARD FEATURES with MXP-200FB (FANUC-32i) POWERFUL 30 HP SPINDLE OUTPUT HIGH SPEED 30 TOOL SWING-ARM ATC SYSTEM HIGH PRECISION CERAMIC SPINDLE BEARINGS RANDOM ACCESS & BI-DIRECTIONAL ATC MAGAZINE IDD
More informationBrillant 285 WET ABRASIVE CUT-OFF MACHINES
The industrial wet cut-off machine meets the highest of demands on space available and possibilities for cutting with its innovative concept for design, construction and operation. A water-cooled 15 kw
More information1551 S. Harris Court,. Anaheim, CA Phone: Fax:
1551 S. Harris Court,. Anaheim, CA 92806 Phone: 714.978.1551... Fax: 714.978.0431 Model 4KE / 4KEH Series: Semi-Automatic, Motorized Y/Z Axes, Wedge-Wedge, Ball- Wedge Triple-Convertible Wire Bonders Last
More informationPart Number Class Category Title UPC Code Image Download Country of Origin Cost MSRP. Short Description. Long Description. Main Specifications
Part Number Class Category Title UPC Code Image Download Country of Origin Cost MSRP Short Description Long Description Main Specifications Brand Form Factor Unit Dimension (DxWxH) Shipping Dimension (DxWxH)
More informationEC type-examination certificate UK/0126/0028 Revision 6
UK/0126/0028 MI-006 EC type-examination certificate UK/0126/0028 Revision 6 Issued by: The National Measurement Office Notified Body Number 0126 In accordance with the requirements of the Measuring Instruments
More informationTechnology to fascinate you: Wire Eroding System PA20
Technology to fascinate you: Wire Eroding System Official Supplier of BMW Sauber F1 Team The Mitsubishi Electric business area FA Mechatronics EDM was awarded the Global Market Leadership Award 2005 by
More informationDescription: IRB-540 Robot with 6-axis Flexi-Wrist Manipulator, S4P Controller, Conveyor Tracking, and Analog Paint Regulation (APR)
Standard Module # Description: IRB-540 Robot with 6-axis Flexi-Wrist Manipulator, S4P Controller, Conveyor Tracking, and Analog Paint Regulation (APR) The IRB-540 Flexi-Wrist finishing robot is specifically
More informationPlasma cutting. ATPL series Plasma Cutting Machines For Impressive Performances
Plasma cutting ATPL series Plasma Cutting s WWW.HACO.COM For Impressive Performances 1 CNC PLASMA CUTTING MACHINE A WELL-ENGINEERED MACHINE The ATPL features an over dimensioned table frame which is constituted
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationAUTOMATIC CEMENT COMPRESSION & FLEXURAL MACHINES
AUTOMATIC COMPRESSION & FLEXURAL MACHINES Product Code UTCM-6331 250 kn Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz UTCM-6331/110 250 kn Automatic Cement Compression Testing Machine
More informationTRUMPF TC 2000 R. CNC punching machine. Manufacture year 1999 Control BOSCH Typ 3 Machine number Max. punching force
TRUMPF TC 2000 R CNC punching machine Manufacturer Model TRUMPF TC 2000 R Manufacture year 1999 Control BOSCH Typ 3 Machine number 700111 Working area Max. punching force 1.270 x 2.020 mm 180 kn KISTNER
More informationForm Measurement ROUNDTEST RA-1600
Form Measurement ROUNDTEST RA-1600 A new PC-compliant Roundness and Cylindricity form measuring instrument with extensive analysis features to enable measurement of a wide variety of workpieces. Powerful
More informationAUTOMATIC TENSION & COMPRESSION TESTING MACHINE
Product Code UTM-3000 Automatic 500 kn Tension and 1000 kn Compression Testing Machine Standards GENERAL PROPERTIES UTM-3000 automatic 500 kn tension and 1000 kn compression testing machine has been designed
More informationPROCESSING INDUSTRY CAPTURE QUALITY
CAPTURE QUALITY PROCESSING INDUSTRY VISIT OUR WEBSITE: WE CAPTURE QUALITY IN OVER 70 COUNTRIES WORLDWIDE... TURBOVAC: CAPTURING QUALITY THAT LASTS! COMPLETE PRODUCT LINE TURBOVAC OFFERS A COMPLETE PRODUCT
More informationUser & Maintenance Manual (original)
User & Maintenance Manual (original) Type: IMPORTANT Carefully read this User Manual and follow the instructions and warnings before operating the machine. Any modification or change may cause the loss
More informationLPC-08 Series. Quick Reference Guide. 8 Multi-functional Touch Panel PC. Copyright Notice. 2 nd Ed May 2010
8 Multi-functional Touch Panel PC Quick Reference Guide 2 nd Ed May 2010 Copyright Notice Copyright 2010 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No. E201708A1A1R Contents 1. Getting Started...3
More informationCopyright by Silc. ca S.p.A All Rights Reserved
OMNIA MAX Omnia Max epitomizes i Silca s entire experience in duplicating bit and double bit (male and female), pump keys, adaptable gorges keys, central and rear stop keys and keys with vertical cuts.
More informationDL4S Profile. Light source 480 W RGBW LED engine. LIGHT OUTPUT lm. Zoom range 10-45
DL4S Profile Extending the possibilities of the playful, colorful DLS Profile, the new DL4S is equipped with enhanced version of the ROBE RGBW LED module for brighter saturated colours and more powerful
More informationBIESSE A U S T R A L I A
MODEL: ROVER BG 1224 WITH SPECIAL Z CLEARANCE NUMERICALLY CONTROLLED MACHINING CENTRES SERIES ROVER B G FT STANDARD FEATURES: As guarantee of the quality of its products and services, BIESSE has been certified
More informationTP SERIES TURRET PUNCH DURMA
BETTER PARTS BETTER PROFITS TP SERIES Standard Equipment Siemens 840Dsl CNC Control Remote Diagnostic via Ethernet Automatic Clamp Positioning Alignment Tool Oil Cooler Brush Table Up to Six Indexable
More informationRIPMR Regional Institute for Physical Medicine and Rehabilitation Kallettumkara, Irinjalakuda
RIPMR Regional Institute for Physical Medicine and Rehabilitation Kallettumkara, Irinjalakuda File No: SJD/Purchase/RIPMR/05/2015 Department: Social Justice 1. Name of Institution : Regional Institute
More informationUSYS Monitoring, Data Control, Acquisition and Display for Single and Multi Sensor Applications.
USYS 2100 Monitoring, Data Control, Acquisition and Display for Single and Multi Sensor Applications. New user friendly design Operator interface with choice of languages New menu driven, context sensitive
More information1 of 21. SGMT Technologies Sdn. Bhd. Optimum: OptiSaw Manual Cold Saw CS315. Optimum: OptiMill MT series
SGMT Technologies Sdn. Bhd. : OptiSaw Manual Cold Saw CS315 's circular saw CS315 comes standard with machine base. Specification: Motor power: 1.5 kw Coolant motor: 40 W Cutting angle: -45 to +45 Speed:
More informationPart Number Class Category Title UPC Code Image Download Country of Origin Cost MSRP. Short Description. Long Description. Main Specifications
Part Number Class Category Title UPC Code Image Download Country of Origin Cost MSRP Short Description Long Description Main Specifications Brand Form Factor Unit Dimension (DxWxH) Shipping Dimension (DxWxH)
More informationSHAKERS MIXERS MILLS BATH CRYOSTATS THERMOSTATIC BATHS
SHAKERS MIXERS MILLS BATH CRYOSTATS THERMOSTATIC BATHS SHAKERS AND MIXERS - Orbital Max. load (Kg) Amplitude (mm) Resolution (rpm) Timer (min) Useful surface (mm) OM10E 10000-01024 10 10 0-400 0-120 30
More informationA-SERIES BED MILLS. 3-Axis CNC for Job Shops, Tool Rooms, and Production Operations. Featuring Semi-Automatic + Conversational Programming + G-Code
A-SERIES BED MILLS 3-Axis CNC for Job Shops, Tool Rooms, and Production Operations Featuring Semi-Automatic + Conversational Programming + G-Code A-Series Bed Mills are offered in two styles: NC HEAD The
More informationCUBE.460. The system for automation in the manual soldering area
CUBE.460 The system for automation in the manual soldering area CUBE.460 The new entry-level selective soldering system The new CUBE.460 entry-level soldering system is designed as a production cell for
More informationSystem concept. Hardware DATA SHEET VECTRON POS TOUCH 15 II PCT
System concept The successor model of the Vectron POS Touch 15 provides increased performance thanks to new electronics. High-quality materials and careful processing make the POS system particularly suitable
More informationSX 6000 Paperless Recorder
SILVER AUTOMATION INSTRUMENTS HTTP://WWW.SILVERINSTRUMENTS.COM RUNYI GROUP SX 6000 Paperless Recorder Product Overview SX6000 Paperless Recorder color-screen paperless recorder has 16-channel universal
More informationWELDING CONSOLE KVS L
WELDING CONSOLE KVS L KVS-L 1x1 KVS-L 2x2 KVS-L 3,5x2 A (mm) AS REQUEST AS REQUEST AS REQUEST B (mm) 1000 2000 3500 C (mm) 1000 2000 2000 DIFFERENT WELDING PROCCESS TIG, MIG,MAG SAW TIG, MIG,MAG SAW TIG,
More informationworkstation acessories ErgoChair ergonomic chair designed for the factory worker
workstation acessories ErgoChair ergonomic chair ErgoChair ergonomic chair designed for the factory worker the backrest and seat foot ring adjustment ranges are designed to cover a large variety of production
More informationTable of Contents. Overview...2. Features...2. Packing List...3. Assembly...5. Installation...8. Front Panel...9
Table of Contents INTRODUCTION...1 SERVERLINK LCD CONSOLE Overview...2 Features...2 Packing List...3 Assembly...5 Installation...8 Front Panel...9 Replaceable Keyboard and Touch Pad... 10 LCD Specification...
More informationCombining the efficiency and ease of operation of flat sheet collating with the productivity, versatility and quality of a saddle-stitching system.
Combining the efficiency and ease of operation of flat sheet collating with the productivity, versatility and quality of a saddle-stitching system. The Horizon StitchLiner5500/6000 is an innovative saddle-stitching
More informationSUPER LEDF10HP DATASHEET
DATASHEET LED Fresnel Spotlight 330W - CRI>95 White light, either Tungsten or Daylight balanced OVERVIEW The Super LED F10HP is a high efficiency Fresnel lens spotlight using the innovative High Power
More informationAlignment. Featuring ProAlign. Software
Alignment Featuring ProAlign Software HawkEye Alignment Featuring ProAlign Software The HawkEye Alignment System featuring ProAlign alignment software functions on a Linux operating system. This unique
More informationCopyright by Silca S.p.A All Rights Reserved. products quality.
Futura Pro is the only electronic key cutting machine able to duplicate all types of residential and automotive keys (flat, cruciform, laser and dimple keys). * Keys cut with specific optional accessories.
More informationSystem concept. Hardware DATA SHEET VECTRON POS TOUCH 12 II PCT
System concept The successor of the Vectron POS Touch 12 is even more powerful thanks to its new electronics and comes with a scratch-proof and wear-free capacitive glass touch screen. High-quality materials
More informationOPERATING INSTRUCTIONS:
List OPERATING INSTRUCTIONS: Preparation For Installation, Product Identification Charging The Batteries ing And Adjusting The Lift Mounting Head s Brackets Mounting Clamps And Quick-Locking Arms Installation
More informationEasy 3D WLAN CCD kits for ML 1800 and ML TECH+ Wheel alignment with user PC
Easy 3D WLAN CCD kits for ML 1800 and ML TECH+ Wheel alignment with user PC Wireless transfer to tablet PC Saving space without PC cabinet and fewer cables Flexible, mobile and highly accurate Easy 3D:
More informationIT-467-*-BT 22" (1680 x 1050)
IT-467-*-BT 22" (1680 x 1050) The IT-467-*-BT with luminous 22" display is the Panel PC of the future for all widescreen applications in industrial areas. The 1680 x 1050 pixel resolution (WSXGA) is the
More informationPC100 - Concept. Advantages in comparison
PC100 - Concept The future of HMI-devices for the use in explosion endangered areas is less based on short lived proprietary products but more on all-purpose, modular products of latest technology and
More informationLU9715 Digital Projector Installation Guide
LU9715 Digital Projector Installation Guide English Table of Contents Product information... 3 Packing contents...3 Projector specifications...4 Projector exterior view...4 Terminals...5 Control panel...5
More informationautomatic cnc drilling and sawing (opt) lines
MAC s.r.1. MAC s.r.1. IMAC s.r.1. MAC s.r.1. IMAC s.r.1. MAC s.r.1. IMAC s.r.1. IMAC s.r.1. IMAC s.r.1. MAC s.r.1. IMAC s.r.1..e~!.'*imac s.r.1. IMAC s.r.1. IMAC s.r.1. MAC s.r.1. [MAC s.r.1. MAC s.r.1.
More informationFPC 08W Series. 8 Widescreen Multi-functional Touch Panel PC. Quick Reference Guide. 2 nd Ed 28 June, 2010
FPC 08W Series 8 Widescreen Multi-functional Touch Panel PC Quick Reference Guide 2 nd Ed 28 June, 2010 Copyright Notice Copyright 2010 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No. E201708WAA1R
More informationto alter products designs s, dimensions or info to im mprove
the products quality.headquarters, with express exclusion of any other court. Matrix Evo the products quality.headquarters, with express exclusion of any other court. Matrix Evo Matrix Evo is a key-cutting
More informationIndicator not included
Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when
More informationCutting devices, longitudinal 5
Cutting devices, longitudinal 5 SM-120 Multisystem Belt/tape width max. mm 120 inch 4.7 Cutting width per operation mm 120 inch 4.7 Belt/tape thickness max. mm 5 inch 0.2 Electric power supply V 3 230/400
More informationSpecifications/price list CMA CNC controlled gantry drilling machines type RAPID-DRILL GRD CNC and GRD 60Z CNCZ
Specifications/price list CMA CNC controlled gantry drilling machines type RAPID-DRILL GRD 25-42 CNC and GRD 60Z CNCZ This newly concepted drilling machine is designed for the fully automatic execution
More informationEdge banders CNC machining centres Vertical panel saws Pressure beam saws Panel Handling. Nesting Technology with High-End Format DYNESTIC 7521
Edge banders CNC machining centres Vertical panel saws Pressure beam saws Panel Handling Nesting Technology with High-End Format DYNESTIC 7521 P R O D U C T I V I T Y A N D P R E C I S I O N D Y N E S
More informationUnited Kingdom of Great Britain and Northern Ireland
(UK/0126/0028) MI-006 United Kingdom of Great Britain and Northern Ireland Certificate of EC type-examination of a measuring instrument Number: UK/0126/0028 revision 1 issued by the Secretary of State
More informationMultiCam 1000 Series CNC Router Feature and Specification Guide. Maximum Flexibility Made Affordable! MultiCam. Ideal for Cutting: Wood
MultiCam 1000 Series CNC Router Feature and Specification Guide Maximum Flexibility Made Affordable! MultiCam accepted the industry challenge to build a rigid, reliable CNC machine platform with excellent
More informationDL1000 DURABILITY & LUBRICITY TEST SYSTEM
OakRiver Technology s DL1000 provides accurate, reliable measurement of the durability and lubricity of hydrophilic coatings on catheters and guidewires. Engineered with robust components and controls,
More informationBelec IN-SPECT New Compact Spectrometer for Metal Analysis with latest 5GSO System
Belec IN-SPECT Specifications high performance ability due to the latest 5GSO System (5th Generation Spectrometer Optic System) latest state-of-the-art detectors, developed for spectroscopy application
More informationWireless Inspection Camera with recording LCD monitor. Product code: SRCAMV6 CAMERA NUMBER:
User Manual Super Cam V6 SRCAMV6 Wireless Inspection Camera with recording LCD monitor. Product code: SRCAMV6 CAMERA NUMBER: Please read this user manual carefully before using this product. CONTENTS Welcome...
More informationBelec Vario Lab. The Laboratory Spectrometer for Metal Analysis RELIABLE. QUALITY. CONTROL.
Belec Vario Lab RELIABLE. QUALITY. CONTROL. Maximum Flexibility The open sparking stand design of the Belec Vario Lab with easy access from three sides enables nondestructive tests of even huge and bulky
More informationCopyright by Si. ilca S.p.A All Right. ts Reserved
OMNIA Omnia epitomizes Silca s entire experience in duplicating bit and double bit (male and female), pump and central stop keys. Above-average performances and reliability make Omnia the most complete
More informationParts and Diagrams 3. HP Designjet T1100 MFP, 4500mfp, 4500 Scanner, 820 MFP Service Manual 3-1
3 3 3-3 Copier Covers 3-6 Top Assemblies 3-8 Inside Guide Plate 3-10 Drive Assemblies 3-12 Camera Components and Fan 3-14 Electronic Boards 3-16 Touch Screen 3-18 Touch Screen Cabinet Components (Part
More informationHTA-MB Wheel Alignment Systems
Form 5891-TE-05, 9/08 HTA-MB Wheel Alignment Systems Customized for Aligning All Mercedes-Benz Vehicles Mercedes-Benz HTA-MB-R Wheel Alignment Systems Approved Equipment for All Mercedes-Benz Workshops
More informationFuturaPRO. Electronic Key Cutting Machine
FuturaPRO Electronic Key Cutting Machine FuturaPRO The Next Generation The Ultimate Electronic Key Cutting Experience The original Futura electronic key cutting machine was the first machine on the market
More informationApplication Series Page. Electronic Indicators 900, 901, 903 E.2 E.3. Dial Indicators 450, 451, 458 E.4 E.5. Transducer Probes 971 E.
E Electronic Indicators, Dial Indicators, Digital Probes, Digital Readouts TABLE OF CONTENTS Application Series Page Electronic Indicators 900, 901, 903 E.2 E.3 Dial Indicators 450, 451, 458 E.4 E.5 Transducer
More informationRotary Microtomes. Tissue Processors. Embedding Centers. Microtomes. Cryostats. Water Bath & Slide Warmer. Staining Systems.
Rotary Microtomes All SLEE microtomes are produced at the company s seat in Mainz, Germany. The highly precise, modularly built rotary microtomes range from a manual unit, type CUT 4062, via the semi-automatic
More informationVIBRATION TEST CHAMBERS. Temperature- and Climatic Vibration test chambers. Vibration. test chambers
VIBRATION TEST CHAMBERS Temperature- and Climatic Vibration test chambers Vibration test chambers VIBRATION TEST CHAMBERS THERMODYNAMIC AND MECHANICAL ENVIRONMENTAL SIMULATION Quality, reliability and
More information