ALPHA SIMBOX Small Distribution Boards

Transcription

1 ALPHA SIMBOX Small Distribution Boards /2 Introduction /3 Introduction /4 Flush-mounting and hollow-wall distribution boards /5 Surface-mounting and hood-type distribution boards /6 Accessories /7 Dimensional drawings SIMBOX LC /9 Introduction /9 Flush-mounting and surface-mounting versions / Dimensional drawings SIMBOX WP /2 Introduction /2 Surface-mounting distribution boards /4 Dimensional drawings Siemens ET A 0/2008

2 Overview Small distribution boards for modular installation devices with mounting depths of 55 mm and from 55 mm to 70 mm Modular width MW r 8 mm Cut-out height in the cover for shock protection: 45 mm Benefits Simple cable entry due to the plug-in and latching sliding flange Fast wiring through N/PE plug-in terminals (in flush mounting and hollow-wall distribution boards for modular installation devices up to a mounting depth or 70 mm) and tried and test strain-relief clamping terminals (remaining small distribution boards of the range) Convenient cable routing thanks to the wiring space that has been expanded to 2 mm in versions of the modular devices with a mounting depth of up to 70 mm The modern design of the steel sheet door and its handle enable fast concealed lock installation High mechanical strength due to - raised masking frame, - double-layer wall-recessed boxes made of impact-resistant plastic and - electrogalvanized steel sheet doors and masking frames with powder coating Masking frames provide flush mounting flexibility of up to 22 mm Standard mounting rails can be fitted in the wall-recessed box before installation Application Small distribution boards are suitable as sub-distribution boards or floor panel boards for all applications in electrical building installations. Due to their small mounting depth, they can be installed close to the respective load center in residential and nonresidential buildings, as well as in schools, commercial buildings and shops. Design Small distribution boards for flush-mounting, hollow-wall, surface-mounting and hood-type distribution boards (without door) are available in to 4-tier versions; hood-type distribution boards with doors are only available in the to 3-tier version. Equipment The distribution boards can be equipped with modular installation devices, such as MCBs and RCCBs, up to a mounting depth of 55 mm or 70 mm with mountings for snapping onto the 35 mm x 7.5 mm standard mounting rails according to EN Each tier can be fitted with devices up to 2 modular widths. For the 3 and 4-tier versions, the upper and lower tier can be extended to 3 modular widths by cutting out the knockouts in the shock protection cover. Technical specifications Rated current in A Up to 63 Rated voltage in V AC 400 Degree of protection Safety class Standards small distribution boards comply with DIN VDE 0603, DIN 4387 and EN N/PE terminals IP30 Clamping points - plug-in terminals Clamping points - screw terminals 2 (total insulation) Color Pure white RAL 900 Distribution board version Mounting depth Plug-in terminals mm Flush mounting Hollow-wall Surface mounting Hood Introduction Screw terminals Number of tiers Number of clamping points Spring-loaded terminals Screw terminals mm mm Number of tiers Number of clamping points Strain-relief clamping Screw terminals terminals mm mm Siemens ET A 0/2008 /3

3 Siemens AG 2008 Flush-mounting and hollow-wall distribution boards Overview According to DIN VDE 0603, DIN 4387 and EN Degree of protection IP30 Safety class 2 (total insulation) Standard mounting rail spacing 25 mm, standard mounting rails 35 mm x 7.5 mm according to EN 6075 With sliding flanges and N/PE terminals Color pure white RAL 900 Hollow-wall boxes made of flame-retardant material Cable binders for strain relief are included in delivery (hollow-wall distribution boards only) Selection and ordering data For accessories, see page /6. For dimensional drawings, see page /7. Version DT Order No. Price PU PS*/ P. PG unit Unit(s) Unit(s) Weight approx. kg Flush-mounting distribution boards Flush-mounting distribution boards, for 55 mm device mounting depth N/PE terminals (screw connection) Recess dimensions -tier 3 x x 333 x 65 x 2 A 8GB5 63 / tier 436 x x 333 x 65 2 x 2 A 8GB5 632 / tier 58 x x 333 x 65 3 x 2 ) A 8GB5 633 / GB tier 706 x x 333 x 65 4 x 2 ) A 8GB5 634 / ) For 3 and 4-tier distribution boards the upper and lower tier can be cut to 3 MW. Flush-mounting distribution boards, for up to 70 mm device mounting depth N/PE terminals (plug-in connection) Recess dimensions -tier 3 x x 333 x 92 x 2 A 8GB5 65- / tier 436 x x 333 x 92 2 x 2 A 8GB / tier 58 x x 333 x 92 3 x 2 ) A 8GB / GB tier 706 x x 333 x 92 4 x 2 ) A 8GB / ) For 3 and 4-tier distribution boards the upper and lower tier can be cut to 3 MW. Hollow-wall distribution boards Hollow-wall distribution boards, for 55 mm device mounting depth N/PE terminals (screw connection) 8GB5 64 8GB5 67- Recess dimensions -tier 3 x x 333 x 65 x 2 A 8GB5 64 / tier 436 x x 333 x 65 2 x 2 A 8GB5 642 / tier 58 x x 333 x 65 3 x 2 ) A 8GB5 643 / tier 706 x x 333 x 65 4 x 2 ) A 8GB5 644 / ) For 3 and 4-tier distribution boards the upper and lower tier can be cut to 3 MW. Hollow-wall distribution boards, for up to 70 mm device mounting depth N/PE terminals (plug-in connection) Recess dimensions -tier 3 x x 333 x 92 x 2 A 8GB5 67- / tier 436 x x 333 x 92 2 x 2 A 8GB / tier 58 x x 333 x 92 3 x 2 ) A 8GB / tier 706 x x 333 x 92 4 x 2 ) A 8GB / ) For 3 and 4-tier distribution boards the upper and lower tier can be cut to 3 MW. /4 Siemens ET A 0/2008 * You can order this quantity or a multiple thereof.

4 Surface-mounting and hood-type distribution boards Overview According to DIN VDE 0603, DIN 4387 and EN Degree of protection IP30 Safety class 2 (total insulation) Standard mounting rail spacing 25 mm, standard mounting rails 35 mm x 7.5 mm according to EN 6075 N/PE terminals with strain-relief clamping technology Color pure white RAL 900 Selection and ordering data Version DT Order No. Price PU PS*/ P. unit PG Weight approx. kg Unit(s) Unit(s) Surface-mounting distribution boards Surface-mounting distribution boards, for 55 mm device mounting depth External dimensions 8GB5 74 -tier 272 x 342 x 72.5 x 2 A 8GB5 74 / tier 397 x 342 x x 2 A 8GB5 742 / tier 542x 342x x 2 ) A 8GB5 743 / tier 667 x 342 x x 2 ) A 8GB5 744 / ) For 3 and 4-tier distribution boards the upper and lower tier can be cut to 3 MW. Hood-type distribution boards Hood-type distribution boards, for up to 70 mm device mounting depth External dimensions Without door --tier 22 x 275 x 74 x 2 ) A 8GB5 775 / tier 346 x 275 x 74 2 x 2 ) A 8GB5 776 / tier 49 x 275 x 74 3 x 2 ) A 8GB5 777 / tier 66 x 275 x 74 4 x 2 ) A 8GB5 778 / GB5 776 Complete, with pure white door (RAL 900) --tier 22 x 275 x 00 x 2 ) A 8GB5 76 / tier 346 x 275 x 00 2 x 2 ) A 8GB5 762 / tier 49 x 275 x 00 3 x 2 ) A 8GB5 763 / GB5 762 Complete, with blue transparent door --tier 22 x 275 x 00 x 2 ) A 8GB tier 346 x 275 x 00 2 x 2 ) A 8GB tier 49 x 275 x 00 3 x 2 ) A 8GB GB5 786 ) For 3 and 4-tier distribution boards the upper and lower tier can be cut to 3 MW. For accessories, see page /6. For dimensional drawings, see pages /7 and /8. * You can order this quantity or a multiple thereof. Siemens ET A 0/2008 /5

5 Siemens AG 2008 Accessories Selection and ordering data 8GB4 00 8GB GB6 224 Version DT Order No. Price PU PS*/ P. PG unit Unit(s) Unit(s) Weight approx. kg Wall anchors A 8GB4 00 set set For fixing wall recessed or hollow-wall boxes 2 sets are required per wall recessed or hollow-wall box set = 2 wall anchors Sleeves C 8GB For cable routing and the mechanical joining of wall recessed boxes or hollow-wall boxes N/PE terminal strips With plug-in technology - For to 2-tier distribution boards with 4 clamping points 4 mm² A 8GB and 3 clamping points 6 mm² - For 3 to 4-tier distribution boards with 2 clamping points 4 mm² A 8GB and 6 clamping points 6 mm² With strain-relief clamping technology A 8GB To be used as supplementary N or PE bar - Clamping points: 30 4 mm² and 6 6 mm² RCCB terminals C 8GB For to 4-tier distribution boards (can only be used in 3 and 4-tier small distribution boards if fitted with plug-in technology) For distributing the neutral conductor to two residual current operated circuit-breakers With 3 x mm 2 / x mm 2 clamping points For mounting in wall recessed boxes or hollow-wall boxes As well as for snapping onto a standard mounting rail 8GB GB GB4 577 Blanking strips For - to 4-tier distribution boards For 4 modular widths With bent support Pure white A 8GB Gray A 8GB Door locks C 8GB4 577 set set For flush-mounting, hollow-wall and surface-mounting distribution boards With key (9 different tumbler arrangements possible, on request) Door locking kits For hood-type distribution boards With key Pure white A 8GB4 378 set set GB GB4 383 Partitions 3-tier vertical C 8GB tier vertical C 8GB and 4-tier horizontal C 8GB /6 Siemens ET A 0/2008 * You can order this quantity or a multiple thereof.

6 Dimensional drawings Dimensional drawings Flush-mounting distribution boards I2_07332a I2_0733a Wall recess Plaster Wall thickness leveling Plaster 22 Wall recess for Wall thickness wall box leveling Hollow-wall distribution boards Device mounting depth 55 mm (left) and 70 mm (right) 70(97) 64(9) Wall cutout X 2) I2_06297c 2 row 3 row I2_0620b I2_06407b (2) ) Board thickness. 2) Minimum clearance -tier 290 mm, 2-tier 45 mm, 3-tier 560 mm, 4-tier 685 mm. 3) Required clearance for swinging out the fixing claws. Device mounting depth 55 mm (dimensions in parentheses apply to mounting depths of up to 70 mm) Surface-mounting distribution boards 6 to 32 ) min. 65 (min. 92) A 333 min. 20 3) 22 wall thickness leveling Device mounting depth: 55 mm Siemens ET A 0/2008 /7

7 Siemens AG 2008 Dimensional drawings Mounting dimensions Hood-type distribution boards with door -mm wiring space behind the standard mounting rail Hood-type distribution boards without door -mm wiring space behind the standard mounting rail /8 Siemens ET A 0/2008