User Manual. Daffodil. 2.4GHz Wireless Mouse Souris Sans Fil 2.4GHz 2.4GHz Wireless Maus Mouse senza fili da 2.4 GHz Ratón Inalámbrica 2.

Transcription

1 Daffodil User Manual 2.4GHz Wireless Mouse Souris Sans Fil 2.4GHz 2.4GHz Wireless Maus Mouse senza fili da 2.4 GHz Ratón Inalámbrica 2.4GHz Model No. : UT-M3

2 User Manual Please follow the instructions below to set up this optical mouse: Part Names and Functions. Normal mode: Left button Show desktop / Show open windows Forward Backward Scroll wheel (Press the wheel down for middle button) Function button Daffodil Gaming mode: Left button Double left click Volume up Volume down Scroll wheel (Press the wheel down for middle button) Function button Daffodil -1-

3 Initial Set Up. Please follow the instructions below to set up this gaming mouse: 1. Remove the battery cover. 2. Insert 1xAA battery. See image in battery slot for polarity instructions. 3. Remove USB receiver from storage slot. 4. Plug the USB receiver into a free USB port on your computer. The driver should install automatically. 5. Replace the battery cover. 6. Turn on the mouse using the power switch. Note: For Mac OS X Users, when plugging in the USB receiver, the Keyboard Assistant dialog box may appear. You can just close this window. DPI Adjustment. 1. Press and hold the Function button until the lights red. 2. Use the scroll wheel to adjust the DPI. The status LED will flash to indicate the DPI selected, a faster flash indicates a higher DPI. 3. Click any button to exit DPI adjusting status. Mode Change Press the Function button to change between normal mode and gaming mode. Power Saving After 3 minutes idling, the mouse enters sleep mode. Press any button to reactivate it. When the computer switches off, the mouse will switch off automatically. After the computer switches on, click any buttons to reactivate it. -2-

4 Note: If the mouse stops working, please replace the battery. If the battery is full, the switch is on and the USB receiver is plugged into the computer and the mouse doesn t work, please follow the steps bellow to re-pair the USB receiver and the mouse: 1. Switch off the mouse and unplug the USB receiver. 2. Switch on the mouse. Then hold both middle button and right button until the flash red. 3. Plug the USB receiver back in. 4. If the flashes quickly, the repairing has been successful and the mouse should work. -3-

5 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/tv technician for help.