PMH. Safety Standards. Model Number:
|
|
- Leslie Rice
- 6 years ago
- Views:
Transcription
1 PMH Highlights & Features Household appliance approvals IEC/EN , IEC/EN and IEC/EN Universal AC input voltage Full power from -20 C to +50 C 5000m or ft. altitude Full corrosion resistant aluminium casing High MTBF > 700,000 hrs as per Telcordia SR-332 Versatile connector options available: IP20, Front Face and Harness connectors Safety Standards CB Certified for worldwide use General Description Model Number: PMH-24V50WCA Unit Weight: 0.21 kg (0.46 lb) Dimensions (H x W x D): 98 x 97 x 38 mm (3.86 x 3.82 x 1.50 inch) The PMH-24V50WCA offers universal input from 85Vac to 264Vac with nominal output voltage of 24V. The highly efficient convection cooling construction can operate from -30 C to 70 C. The PMH series is specifically designed for household electrical appliances with safety approvals including IEC/EN and IEC/EN , as well as IEC/EN/UL In addition, the product meets the EMC approvals to EN / EN for household appliances and EN / EN for residential environment without extra EMI filter required and comes with several connector options consisting of Terminal Block, IP20, Front Face and Harness connectors. Other available options include isolation or non-isolation between Primary Earth and output DC Return (-V pins on output connector). Model Information Model Number Input Voltage Range Rated Output Voltage Rated Output Current PMH-24V50WCA Vac ( Vdc) 24Vdc 2.10A Model Numbering PM H 24V 50W C A Panel Mount Product Type H Household Series Output Voltage Output Power Package Type C Enclosed No PFC Connector Type and Primary Earth to Output DC Return Connection. See options in table below 1 A,S J,U L,V H,T *Options
2 Specifications Input Ratings / Characteristics Nominal Input Voltage Input Voltage Range Nominal Input Frequency Input Frequency Range Nominal DC Input Voltage DC Input Voltage Range Input Current Efficiency at 100% Load Max Inrush Current (Cold Start) Leakage Current Vac Vac 50-60Hz 47-63Hz Vdc Vdc < 115Vac, < 230Vac > 115Vac, > 88.0% 230Vac < 115Vac, < 230Vac < 264Vac Output Ratings / Characteristics* Nominal Output Voltage 24Vdc Factory Set Point Tolerance 24Vdc ± 2% Output Voltage Adjustment Range Output Current Output Power Line Regulation Load Regulation 22-28Vdc 2.10A (50W max.) 50W < 0.5% (@ Vac input, 100% load) < 0.5% (@ Vac input, 0-100% load) PARD** (20MHz) < -20 C to 70 C < < -20 C to -30 C Rise Time Start-up Time Hold-up Time Dynamic Response (Overshoot & Undershoot O/P Voltage) Start-up with Capacitive Loads < nominal input (100% load) < nominal input (100% load) > 115Vac, > 230Vac (100% load) ± Vac input, 0-100% load (Slew Rate: 0.1A/μS, 50% duty 5Hz to 100Hz) 8,000µF Max (@ > -20 C, Vac input -20 C, Vac input) *For power de-rating from < -20 C to -30 C, and 50 C to 70 C, see power de-rating on page 3. **PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1µF ceramic capacitor & 47µF electrolytic capacitor. 2
3 Mechanical Case Chassis / Cover Dimensions (L x W x D) Unit Weight Indicator Aluminium 98 x 97 x 38 mm (3.86 x 3.82 x 1.50 inch) 0.21 kg (0.46 lb) Green LED (DC OK) Cooling System Convection Terminal PMH-24V50WCAA (S) M3.5 x 5 Pins (Rated 300V/15A) PMH-24V50WCAJ (U) PMH-24V50WCAL (V) PMH-24V50WCAH (T) Wire PMH-24V50WCAA (S) AWG PMH-24V50WCAJ (U) AWG PMH-24V50WCAL (V) M3.5 x 5 Pins (Rated 300V/20A) M3.5 x 5 Pins (Rated 300V/20A) Input: B3P( )-VH(LF)(SN) Output: B2P3-VH(LF)(SN) Noise (1 Meter from power supply) Sound Pressure Level (SPL) < 25dBA Environment Surrounding Air Temperature Operating -30 C to +70 C Storage -30 C to +85 C Power De-rating -20 C to -30 C de-rate power by 2.0% / C > 50 C de-rate power by 2.5% / C Operating Humidity Operating Altitude Shock Test (Non-Operating) 5 to 95% RH (Non-Condensing) 0 to 5,000 Meters (16,400 ft.) IEC , 30G (300m/S²) for a duration of 18ms,1 times per direction, 2 times in total Vibration (Non-Operating) Pollution Degree 2 IEC , 10Hz to 50m/S² (5G peak); displacement of 0.35mm; 20 min per axis for all X, Y, Z direction Protections Overvoltage Overload / Overcurrent Over Temperature Short Circuit Degree of Protection Protection Against Shock V range, Hiccup Mode, Non-Latching (Auto-Recovery) > 120% of rated load current, Hiccup Mode, Non-Latching (Auto recovery) < 75 C Ambient Temp@ 100% load, Non-Latching (Auto-recovery) Hiccup Mode, Non-Latching (Auto-recovery when the fault is removed). IP20 (PMH-24V50WCAJ and PMH-24V50WCAU) Class I with PE* connection *PE: Primary Earth 3
4 Reliability Data MTBF Expected Cap Life Time > 700,000 hrs, as per Telcordia SR-332 I/P: 115Vac, O/P: 100% load, Ta: 25 C 10 years (115Vac & 230Vac, 50% 40 C) Safety Standards / Directives Safety Entry Low Voltage Electrical Safety CE Material and Parts Output non-isolated to PE Output isolated to PE SIQ Bauart UL/cUL recognized CB scheme Galvanic Isolation Input to Output 5.0KVac Input to Ground Output to Ground PELV (EN 60335), SELV (EN 60950) SELV (EN 60335), SELV (EN 60950) EN , EN , EN , EN UL and CSA C22.2 No (File No. E191395) IEC , IEC , IEC , IEC In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU RoHS Directive 2011/65/EU Compliant 1.5KVac Output non-isolated to PE (common pins connect to PE) (PMH-24V50WCAA, PMH-24V50WCAJ, PMH-24V50WCAL, PMH-24V50WCAH) 1.5KVdc (Output isolated to PE) (PMH-24V50WCAS, PMH-24V50WCAU, PMH-24V50WCAV, PMH-24V50WCAT) 4
5 EMC EMC / Emissions CISPR 32, EN 55032, FCC Title 47: Class B, EN , EN Immunity to EN 55024, EN , EN Electrostatic Discharge IEC Level 4 Criteria A 1) Air Discharge: 15kV Contact Discharge: 8kV Radiated Field IEC Level 3 Criteria A 1) Electrical Fast Transient / Burst IEC Level 3 Criteria A 1) Surge IEC Level 3 Criteria A 1) 80MHz-1GHz, 10V/M with 1kHz tone / 80% modulation 1.4GHz-2GHz, 10V/M with 1kHz tone / 80% modulation 2GHz-2.7GHz, 10V/M with 1kHz tone / 80% modulation 2kV Common Mode 3) : 2kV Differential Mode 4) : 1kV Conducted IEC Level 3 Criteria A 1) Power Frequency Magnetic Fields IEC Criteria A 1) 150kHz-80MHz, 10Vrms 10A/Meter Voltage Dips and Interruptions IEC % of 100Vac, 20ms 40% of 100Vac, 200ms 70% of 100Vac, 500ms 70% of 100Vac, 600ms 0% of 100Vac, 6000ms 0% of 240Vac, 20ms 40% of 240Vac, 200ms 70% of 240Vac, 600ms 0% of 240Vac, 6000ms Low Energy Pulse Test (Ring Wave) IEC Level 3 Criteria A 1) Common Mode 3) : 2kV Differential Mode 4) : 1kV Voltage Fluctuation and Flicker IEC/EN ) Criteria A: Normal performance within the specification limits 2) Criteria B: Temporary degradation or loss of function which is self-recoverable 3) Asymmetrical: Common mode (Line to earth) 4) Symmetrical: Differential mode (Line to line) Criteria A 1) Criteria A 1) Criteria A 1) Criteria B 2) Criteria B 2) Criteria A 1) Criteria A 1) Criteria A 1) Criteria B 2) 5
6 Block Diagram Device Descriptions PMH-24V50WCAA (S): Terminal Block PMH-24V50WCAJ (U): IP20 Terminal Block PMH-24V50WCAL (V): Front Face PMH-24V50WCAH (T): Harness 1) Input & Output terminal block connector 2) DC voltage adjustment potentiometer (22V 28V) 3) DC OK control LED (Green) 6
7 Dimensions L x W x D: 98 x 97 x 38 mm (3.86 x 3.82 x 1.50 inch) (PMH-24V50WCAA: Terminal Block) Engineering Data Output Load De-rating VS Surrounding Air Temperature Note Fig. 1 De-rating for Vertical and Horizontal Mounting Orientation -20 C to -30 C de-rate power by 2.0% / C > 50 C de-rate power by 2.5% / C 1. Power supply components may degrade, or be damaged, when the power supply is continuously used outside the shaded region, refer to the graph shown in Fig If the output capacity is not reduced when surrounding air temperature >50 C, the device will run into Over Temperature Protection. When activated, the output voltage will go into bouncing mode and will recover when the surrounding air temperature is lowered or the load is reduced as far as necessary to keep the device in working condition. 3. In order for the device to function in the manner intended, it is also necessary to keep a safety distance of 20mm (0.78 inch) from adjacent units while the device is in operation. 4. Depending on the surrounding air temperature and output load delivered by the power supply, the device can be very hot! 5. If the device has to be mounted in any other orientation, please contact info@deltapsu.com for more details. 7
8 Output Load De-rating VS Input Voltage No output power de-rating across the entire input voltage range Assembly & Installation A B C Mounting holes for power supply assembly onto the mounting surface. The power supply shall be mounted on minimum 2 mounting holes using M3 screw minimum 5mm length. This surface belongs to customer s end system or panel where the power supply is mounted. Connector Side Mounting (Vertical) Base Mounting (Vertical) Side Mounting (Horizontal) Fig. 2 Mounting Orientation Use flexible cable (stranded or solid) with the following sizes: PMH-24V50WCAA (S) PMH-24V50WCAJ (U) PMH-24V50WCAL (V) AWG AWG AWG The torque at the Connector shall not exceed 13Kgf.cm (11.23 lbf.in). The insulation stripping length should not exceed or 7mm. 8
9 Installation of Mounting Accessories Only use M3 screw 6mm (0.23 inch) through the base mounting holes. This is to keep a safety distance between the screw and internal components. Recommended mounting tightening torque: 4~8Kgf.cm (3.47~6.94 lbf.in). Safety Instructions To ensure sufficient convection cooling, always maintain a safety distance of 20mm (0.78 inch) from all ventilated surfaces while the device is in operation. The device is not recommended to be placed on surface with low thermal conductivity, such as plastics, for example. Note that the enclosure of the device can become very hot depending on the ambient temperature and load of the power supply. Do not touch the device while it is in operation or immediately after power is turned OFF. Risk of burning! Do not touch the terminals while power is being supplied. Risk of electric shock. Prevent any foreign metal, particles or conductors from entering the device through the openings during installation. It may cause: Electric shock; Safety Hazard; Fire; Product failure The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Warning: When connecting the device, secure Earth connection before connecting L and N. When disconnecting the device, remove L and N connections before removing the Earth connection. The device is earthed and must be inaccessible. Accessories L-01: Latch P-03: Bracket These accessories are used to mount the panel mount power supply onto a DIN rail. 9
10 Functions Start-up Time The time required for the output voltage to reach 90% of its final steady state set value, after the input voltage is applied. Rise Time The time required for the output voltage to change from 10% to 90% of its final steady state set value. Hold-up Time Time between the collapse of the AC input voltage, and the output falling to 95% of its steady state set value. Graph illustrating the Start-up Time, Rise Time, and Hold-up Time Inrush Current Inrush current is the peak, instantaneous, input current measured and, occurs when the input voltage is first applied. For AC input voltages, the maximum peak value of inrush current will occur during the first half cycle of the applied AC voltage. This peak value decreases exponentially during subsequent cycles of AC voltage. Dynamic Response The power supply output voltage will remains within ±5% of its steady state value, when subjected to a dynamic load from 0% to 100% of its rated current. 50% duty cycle / 5Hz to 100Hz 10
11 Overload & Overcurrent Protections (Auto-Recovery) The power supply s Overload (OLP) and Overcurrent (OCP) Protections will be activated when output current exceeds 120% of I O (Max load). In such occurrence, the V O will start to droop and once the power supply has reached its maximum power limit, the protection is activated and the power supply will go into Hiccup mode (Auto-Recovery). The power supply will recover once the fault condition of the OLP and OCP is removed and I O is back within the specifications. Overvoltage Protection (Auto-Recovery) The power supply s overvoltage circuit will be activated when its internal feedback circuit fails. The output voltage shall not exceed its specifications defined on Page 3 under Protections. It is not recommended to prolong the duration of I O when it is <120% but >100%, since it may cause damage to the PSU. Short Circuit Protection (Auto-Recovery) The power supply s output OLP/OCP function also provides protection against short circuits. When a short circuit is applied, the output current will operate in Hiccup mode, as shown in the illustration in the OLP/OCP section on this page. The power supply will return to normal operation after the short circuit is removed. Over Temperature Protection (Auto-Recovery) As described in load de-rating section, the power supply also has Over Temperature Protection (OTP). In the event of a higher operating temperature at 100% load, the power supply will run into OTP when the operating temperature is beyond what is recommended in the de-rating graph. When activated, the output voltage will go into bouncing mode until the temperature drops to its normal operating temperature as recommended in the derating graph. 11
12 Operating Mode Fig. 3 Redundancy / Parallel Operation Connection Diagram Redundant Operation In order to ensure proper redundant operation for the power supply units (PSUs), the output voltage difference between the two units must be kept at 0.45~0.50V for these 24V supplies. Follow simple steps given below to set them up for the redundant operation: Step 1. Measure output voltage of PSU 1 and PSU 2. If PSU 1 is the master unit, then V O of PSU 1 must be higher than PSU 2. In order to set the output voltage, connect each power supply to 50% of rated load, and set the PSU 1 and PSU 2 output voltage. Step 2. Connect the right DRR-20N (or 20A) module to the power supply units PSU 1 and PSU at Vin 1 & Vin 2, respectively. Step 3. Connect the system load to V out. Please note that output voltage V out from DRR module will be = V O (output voltage of power supply) V drop* (in DRR module). Parallel Operation These DRR modules can also be used for Parallel function in order to increase the output power by N+1 (e.g. 2.5A + 2.5A = 5A or 2.5A + 2.5A + 2.5A = 7.5A) or current sharing, and thus increasing the power supply and system reliability. Though the PMH-24V50WCA is not designed for current sharing, a good current sharing between two power supplies can be achieved by following simple steps as below (Refer to Fig. 3 for the Connection Diagram). Step 1. Set output load condition for both supplies at 50% and measure the output voltages. Step 2. Adjust output voltages to the same level or within ±25mV difference. Step 3. Connect PSU 1 and PSU 2 with the DRR-20A module and measure at V in 1 & V in 2 to verify the voltage difference. Ensure the voltages are within ±25mV. Step 4. Output voltage from DRR module V out will be = V O (output voltage of power supply) V drop* (in DRR module). *V drop will vary from 0.60V to 0.90V (Typical 0.65V) depending on the load current and surrounding air temperature. 12
13 Others Delta RoHS Compliant Restriction of the usage of hazardous substances The European directive 2011/65/EU limits the maximum impurity level of homogeneous materials such as lead, mercury, cadmium, chrome, polybrominated flame retardants PBB and PBDE for the use in electrical and electronic equipment. RoHS is the abbreviation for Restriction of the use of certain hazardous substances in electrical and electronic equipment. This product conforms to this standard. 13
PMC. PMC Panel Mount Power Supply 24V 50W 1 Phase / PMC-24V050W1A. Highlights & Features. Safety Standards. Model Number: General Description
PMC Highlights & Features Universal AC input range from 85Vac to 264Vac without power de-rating Full Aluminium casing for lightweight and corrosion resistant handling Conform to harmonic current IEC/EN
Safety Standards. Model Number:
PMC Highlights & Features Universal AC input range from 85Vac to 264Vac without power de-rating High operating ambient temperature, > 60 o C de-rating power High MTBF > 700,000 hrs. as per Telcordia SR-332
PMT. PMT Panel Mount Power Supply 5V 50W 1 Phase / PMT-5V50W1A. Highlights & Features. Safety Standards. Model Number: General Description
PMT Highlights & Features Universal AC input range Power will not de-rate from input voltage 100Vac to 264Vac High MTBF > 700,000 hrs. per Telcordia SR-332 Short Circuit / Overvoltage / Overload / Over
PMT. Safety Standards. Model Number:
PMT Highlights & Features AC input range selectable by switch Full aluminium casing for light weight and corrosion resistant handling Built-in automatic fan speed control circuit MTBF > 700,000 hrs. as
PMT. Model Number: Model Number Input Voltage Range Output Voltage Output Current PMT-5V350W1A (Selectable by Switch)
PMT Highlights & Features AC input range selectable by switch Full Aluminium casing for light weight and corrosion resistant handling Built-in automatic fan speed control circuit Wide operating temperature
PMC. Model Number: Model Number Input Voltage Range Output Voltage Output Current PMC-12V060W1NA Vac ( Vdc) 12Vdc 5.
PMC Highlights & Features Universal AC input voltage without power de-rating Full corrosion resistant Aluminium chassis NEC Class 2 power supply and Limited Power Source (LPS) approvals High MTBF > 700,000
PMT. Model Number: CC Code PM 24V 200W 1 A Panel Mount Product Type T Enclosed L L Frame*
PMT Highlights & Features AC input voltage selectable by switch Full Aluminium casing for light weight and corrosion resistant handling Convection cooling Cold start -20 C at 100% load (200W) Low leakage
Model Number: Model Number Input Voltage Range Output Voltage Output Current PMC-24V100W1AX Vac ( Vdc) 24Vdc 4.17A
PMC Highlights & Features Universal AC input range from 85Vac to 264Vac without power de-rating Full Aluminum casing for light weight and corrosion resistant handling High MTBF > 700,000 hrs. as per Telcordia
Chrome Class II DIN Rail Power Supply 24V 10W 1 Phase (NEC Class 2 & Household) / DRC-24V10W1HZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Household appliance approvals IEC/EN 60335-1 4kV Electrical Fast Transient / Burst Universal AC input voltage
Safety Standards. Model Number:
PMC Highlights & Features Universal AC input range from 85Vac to 264Vac without power de-rating Full Aluminum casing for light weight and corrosion resistant handling High MTBF > 700,000 hrs. as per Telcordia
Safety Standards. Model Number:
PMC Highlights & Features Universal AC input range from 85Vac to 264Vac without power de-rating Full Aluminum casing for light weight and corrosion resistant handling High MTBF > 700,000 hrs. as per Telcordia
Chrome DIN Rail Power Supply 12V 9.96W 1 Phase (Class II & NEC Class 2) / DRC-12V10W1A
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
Chrome DIN Rail Power Supply 5V 7.5W 1 Phase (Class II & NEC Class 2) / DRC-5V10W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
PMT. Safety Standards. Model Number:
PMT Highlights & Features AC input voltage range selectable by switch Full aluminium casing for light weight and corrosion resistant handling Built-in automatic fan speed control circuit MTBF > 700,000
Chrome DIN Rail Power Supply 24V 10W 1 Phase (Class II & NEC Class 2) / DRC-24V10W1A
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
PMC. Safety Standards. Model Number:
PMC Highlights & Features Universal AC input range from 85Vac to 264Vac without power de-rating Full Aluminium casing for lightweight and corrosion resistant handling Conform to harmonic current IEC/EN
Chrome DIN Rail Power Supply 24V 60W 1 Phase (Class II & NEC Class 2) / DRC-24V60W1A
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
Chrome DIN Rail Power Supply 24V 10W 1 Phase (Class II & NEC Class 2) / DRC-24V10W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 80.0% @ 115Vac & 230Vac NEC Class 2 / Limited
PMC. Model Number: Model Number Input Voltage Range Output Voltage Output Current PMC-24V600W1BA Vac ( Vdc) 24Vdc 25.
PMC Highlights & Features Universal AC input range High PF > 0.99 @ 115Vac Power Boost of 200% for 5 seconds Meet Surge Immunity IEC 61000-4-5, Level 4 (CM: 4kV, DM: 2kV) Built-in fan speed control and
PMC. Model Number: Model Number Input Voltage Range Output Voltage Output Current PMC-48V150W1B Vac ( Vdc) 48Vdc 3.
PMC Highlights & Features Universal AC input voltage range Full Aluminium casing for lightweight and corrosion resistant handling High PF > 0.99 @ 115Vac Conform to harmonic current IEC/EN 61000-3-2, Class
CliQ DIN Rail Power Supply 24V 60W 1 Phase / DRP024V060W1AZ
7 Highlights & Features Universal AC input range Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds Rugged and compact design (Vibration 5G, Shock 30G) Wide operating
Model Number: Model Number Input Voltage Range Rated Output Voltage Rated Output Current PMT-24V100W2AA Vac 24Vdc 4.50A
PMT2 Highlights & Features Safety approvals : IEC60950-1,IEC 60335-1, IEC 61558-1 and IEC 61558-2-16 High line AC input range: 170-264Vac No load power consumption < 0.21W Low profile design : 30mm height
PMT. Model Number: Model Number Input Voltage Range Output Voltage Output Current PMT-12V35W1A Vac 12Vdc 2.92A
PMT Highlights & Features Universal AC input range Power will not de-rate from input voltage 90Vac to 264Vac High MTBF > 700,000 hrs. per Telcordia SR-332 Short Circuit / Overvoltage / Overload / Over
PMT. PMT Panel Mount Power Supply 12V 35W 1 Phase / PMT-12V35W1A. Highlights & Features. Safety Standards. Model Number: General Description
PMT Highlights & Features Universal AC input voltage range Power will not de-rate from input voltage 90Vac to 264Vac High MTBF > 700,000 hrs per Telcordia SR-332 Short Circuit / Overvoltage / Overload
PMT. Model Number: CC Code PM 24V 150W 1 A Panel Mount Product Type T Enclosed L L Frame*
PMT Highlights & Features Conforms to harmonic current IEC/EN 61000-3-2, Class A Selectable AC Switch (90-132Vac, 180-264Vac) High MTBF > 700,000 hrs. as per Telcordia SR-332 Versatile configuration options
Model Number: Model Number Input Voltage Range Rated Output Voltage Rated Output Current PMT-12V100W2B Vac 12Vdc 8.5A PMT-24V100W2B 24Vdc 4.
PMT2 Highlights & Features Household appliance approvals for pollution degree 3 to IEC/EN 60335-1, IEC/EN 61558-1 and IEC/EN 61558-2-16 Universal AC input voltage range No load power consumption < 0.3W
PMT. Model Number: Model Number Input Voltage Range Output Voltage Output Current PMT-D2V100W1A. V1: 3.50A (Selectable by Switch) V2: 5Vdc
PMT Highlights & Features Conforms to harmonic current IEC/EN 61000-3-2, Class A Selectable AC Switch (88-132Vac, 176-264Vac) High MTBF > 700,000 hrs. as per Telcordia SR-332 Versatile configuration options
PMT. Safety Standards. Model Number:
PMT Highlights & Features AC input voltage range selectable by switch (90-132Vac, 180-264Vac) Conforms to harmonic current IEC/EN 61000-3-2, Class A High MTBF > 700,000 hrs as per Telcordia SR-332 Versatile
PMR. PMR Panel Mount Power Supply 4.2V 252W 1 Phase / PMR-4V320WC A. Highlights & Features. Safety Standards. Model Number: General Description
PMR Highlights & Features Universal AC input voltage Full corrosion resistant aluminium case and chassis Built-in active PFC and conforms to harmonic current IEC/EN 61000-3-2, Class A and Class D Low profile
PMT. Safety Standards. Model Number:
PMT Highlights & Features AC input voltage range selectable by switch (85-132Vac, 176-264Vac) Conforms to harmonic current IEC/EN 61000-3-2, Class A High MTBF > 700,000 hrs as per Telcordia SR-332 Versatile
Sync DIN Rail Power Supply 5V 15W 1 Phase (NEC Class 2) / DRS-5V30W1NZ
Highlights & Features Ultra compact size Full power from -10 C to +55 C operation Universal AC input voltage Up to 79.0% efficiency Extreme low temperature cold start at -40 C NEC Class 2 / Limited Power
PMF. Safety Standards. Model Number:
PMF Highlights & Features Universal AC input voltage range Built-in active PFC and automatic fan speed control Full corrosion resistant aluminium casing Conforms to harmonic current IEC/EN 61000-3-2, Class
Chrome DIN Rail Power Supply 12V 25W 1 Phase (Class II & NEC Class 2) / DRC-12V30W1A
Highlights & Features Class II, Double Isolation (No Earth connection is required) Universal AC input voltage range and full power up to 55 C Power will not de-rate for the entire input voltage range Efficiency
PMT. Model Number: Model Number Input Voltage Range Rated Output Voltage Rated Output Current PMT-12V50W1A Vac 12Vdc 4.17A
PMT Highlights & Features Universal AC input voltage range Power will not de-rate from input voltage 90Vac to 264Vac High MTBF > 700,000 hrs per Telcordia SR-332 Short Circuit / Overvoltage / Overload
PMT. Safety Standards. Model Number:
PMT Highlights & Features AC input voltage range selectable by switch Full Aluminium casing for light weight and corrosion resistant handling Built-in automatic fan speed control circuit MTBF > 700,000
Safety Standards. Model Number:
PMC Highlights & Features Universal AC input range from 85Vac to 264Vac without power de-rating Full Aluminum casing for light weight and corrosion resistant handling High PF > 0.99 @ 115Vac Built-in Remote
PMT. Safety Standards. Model Number:
PMT Highlights & Features AC input voltage range selectable by switch (85-132Vac, 176-264Vac) Conforms to harmonic current IEC/EN 61000-3-2, Class A High MTBF > 700,000 hrs as per Telcordia SR-332 Versatile
PMC. Safety Standards. Model Number:
PMC Highlights & Features Universal AC input voltage range Power will not de-rate for the entire input voltage range Full corrosion resistant aluminium casing Conforms to harmonic current IEC/EN 61000-3-2,
PMR. PMR Panel Mount Power Supply 5V 300W 1 Phase / PMR-5V320WD A. Highlights & Features. Safety Standards. Model Number: General Description
PMR Highlights & Features Universal AC input voltage Full corrosion resistant aluminium case and chassis Built-in active PFC and conforms to harmonic current IEC/EN 61000-3-2, Class A and Class D Low profile
Chrome DIN Rail Power Supply 12V 72W 1 Phase (Class II) / DRC-12V100W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power from -25 C to +55 C operation Power will not de-rate for the entire
PMH. Safety Standards. Model Number:
PMH Highlights & Features Household appliance approvals IEC/EN 60335-1, IEC/EN 61558-1 and IEC/EN 61558-2-16 Universal AC input voltage Full power from -20 C to +50 C operation @ 5000m or 16400 ft. altitude
Sync DIN Rail Power Supply 24V 30W 1 Phase (NEC Class 2) / DRS-24V30W1AZ
Highlights & Features Ultra compact size and galvanic isolation up to 3.0KVac between input to output and input to ground Universal AC input voltage and full power from -10 C to +55 C operation Up to 88.0%
Sync DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRS-24V30W1AZ
Highlights & Features Ultra compact size Universal AC input voltage and full power up to 55 C High Efficiency 88.0% typ. @ 230Vac NEC Class 2 / Limited Power Source (LPS) certified Overvoltage / Overcurrent
PJ Open Frame Power Supply 24V 50W 1 Phase / PJ-24V50W NA
PJ Highlights & Features Universal AC input voltage range (85Vac 264Vac) Low Inrush Current / Low Leakage Current High efficiency and PF factor to conserve energy Conforms to harmonic current IEC/EN 61000-3-2,
Sync DIN Rail Power Supply 24V 50W 1 Phase (NEC Class 2) / DRS-24V50W1N
Highlights & Features Ultra-compact size and galvanic isolation up to 3.0KVac between input to output and input to ground Universal AC input voltage and full power from -10 C to +55 C operation Up to 90.0%
PJT Highlights & Features
PJT Highlights & Features Universal AC input voltage Standard industrial foot print of 3 x 5 Low leakage current < 0.1mA Convection cooled operating temperature range from -10 C to +70 C High MTBF > 700,000
Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1A
Highlights & Features Class II, Double Isolation (No Earth connection is required) Universal AC input voltage range and full power up to 55 C Power will not de-rate for the entire input voltage range Up
CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA
Highlights & Features Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed Designed for Class I Div. 2
Safety Standards. Model Number:
PMC Highlights & Features Universal AC input range from 85Vac to 64Vac without power de-rating Full Aluminum casing for light weight and corrosion resistant handling High PF > 0.99 @ 115Vac Built-in Remote
PJ Open Frame Power Supply 12V 100W 1 Phase / PJ-12V100W A
PJ Highlights & Features Universal AC Input (85Vac 264Vac) Low Inrush Current / Low Leakage Current High efficiency and PF factor to conserve energy Conforms to harmonic current IEC/EN 61000-3-2, Class
CliQ II DIN Rail Power Supply 24V 91.2W 1 Phase, NEC Class 2 / DRP-24V100W1NN
Highlights & Features Universal AC input range without power de-rating UL 1310 safety approval NEC Class 2 power supply and Limited Power Source (LPS) approvals Built-in active PFC, PF > 0.99 @ 115Vac
LNE. LED Driver LNE-100W Series / LNE- V100W. Highlights & Features. Safety Standards. Model Number: General Description
LNE Highlights & Features Universal AC input voltage from 90-305Vac High efficiency > 93.0% With IP65/ 67 protection for most outdoor applications Built-in Active PFC and conforms to harmonic current IEC/EN
Sync DIN Rail Power Supply 5V 50W Series / DRS-5V50W1A / DRS-5V50W1N
Highlights & Features Ultra-compact size and galvanic isolation up to 3.0KVac between input to output and input to ground Universal AC input voltage and full power from -10 C to +55 C operation Up to 82.0%
PJ Open Frame Power Supply 24V 100W 1 Phase / PJ-24V100W A
PJ Highlights & Features Universal AC Input (85Vac 264Vac) Low Inrush Current / Low Leakage Current High efficiency and PF factor to conserve energy Conforms to harmonic current IEC/EN 61000-3-2, Class
CliQ II DIN Rail Power Supply 24V 120W 2 Phase / DRP-24V120W2BN
Highlights & Features Designed for single phase input 180-305Vac (for L-N) or 2 of 3-Phase system 2 x 180-550Vac (for L-L) or 254-780Vdc Compact and corrosion resistant aluminium casing Up to 90.0% efficiency
CliQ DIN Rail Power Supply 12V 30W 1 Phase / DRP012V030W1A
Highlights & Features Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed With Conformal Coating on PCBA
CliQ II DIN Rail Power Supply 24V 60W 1 Phase, NEC Class 2 / DRP024V060W1N
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range UL 1310 safety approval NEC Class 2 and Limited Power Source (LPS) approvals Conformal coating
CliQ II DIN Rail Power Supply 24V 120W 3 Phase / DRP024V120W3B
Highlights & Features Universal AC input voltage: 3 x 320Vac 600Vac (3-Phase) or 2 x 360Vac 600Vac (2-Phase) Power will not de-rate for the entire input voltage range Power Boost of 150% for 5 seconds
CliQ DIN Rail Power Supply 12V 30W 1 Phase / DRP012V030W1A
http://www.famcocorp.com/ Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds Conformal coating on PCBAs to protect
CliQ DIN Rail Power Supply 24V 240W 3 Phase / DRP024V240W3AA
Highlights & Features Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed Designed for Class I, Div 2
CliQ II DIN Rail Power Supply 24V 480W 3 Phase / DRP024V480W3B
Highlights & Features Universal AC input voltage: 3 x 320Vac 600Vac (3-Phase) or 2 x 360Vac 600Vac (2-Phase) Power will not de-rate for the entire input voltage range Power Boost of 150% for 5 seconds
PMU Panel Mount Power Supply with Integrated DC-UPS PMU-155W Series / PMU- V155W A PMU. Model Number:
PMU Highlights & Features LED indicators for DC OK (Green) and Battery Reverse Polarity Connection (Red) Zero cut-over time from loss of AC, to battery operation Protection against reverse polarity battery
CliQ DIN Rail Power Supply 12V 100W 1 Phase / DRP012V100W1AA
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds Full corrosion resistant aluminium chassis Hazardous Locations
LYTE DIN Rail Power Supply 24V 120W 1 Phase / DRL-24V120W1A
Highlights & Features Universal AC input voltage Built-in constant current circuit for reactive loads Up to 88.0% efficiency Full power from -10 C to +50 C operation at 230Vac @ 5000 meters or 16400 feet
CliQ DIN Rail Power Supply 24V 480W 1 Phase / DRP024V480W1AA
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds and 200% for 2 seconds Full corrosion resistant aluminium chassis
CliQ II DIN Rail Power Supply 24V 60W 1 Phase / DRP024V060W1B
Highlights & Features Universal AC input voltage range Up to 90.0% efficiency Power Boost of 150% for 5 seconds Full corrosion resistant aluminium casing Extreme low temperature cold start at -40 C Conformal
CliQ DIN Rail Power Supply 24V 120W 1 Phase / DRP024V120W1AA
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds Full corrosion resistant aluminium chassis SEMI F47 certified
CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds Full corrosion resistant aluminium chassis SEMI F47 certified
CliQ II DIN Rail Power Supply 48V 480W 1 Phase / DRP048V480W1B
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 5 seconds and 200% for 2 seconds Full corrosion resistant aluminium chassis
LNV. Safety Standards. Model Number:
LNV Highlights & Features Designed for single phase (for L N) or two phase (for L L) wide input 180-528Vac Up to 94.0% efficiency 6kV common mode & 4kV differential mode surge immunity Active PFC. Meets
LNE. LED Driver LNE-185W Series / LNE- V185W. Highlights & Features. Safety Standards. Model Number: General Description
LNE Highlights & Features North American and International AC voltage options Up to 94.0% efficiency 6kV common mode & 4kV differential mode surge immunity Active PFC. Meets IEC/EN 61000-3-2, Class C Adjustable
CliQ II DIN Rail Power Supply 24V 60W 1 Phase / DRP024V060W1B
Highlights & Features Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation With Conformal Coating on PCBA (DRP024V060W1BN) Class I, Div 2 Hazardous
CliQ DIN Rail Power Supply 24V 480W 1 Phase / DRP024V480W1AA
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds and 200% for 2 seconds Full corrosion resistant aluminium chassis
Safety Standards. Model Number:
LNP-C Highlights & Features Constant current design Input voltage from 198-264Vac Up to 90.5% efficiency Independent type Meets IEC/EN 61000-3-2, Class C Fixed output current IP20 assembly for indoor applications
LYTE DIN Rail Power Supply 24V 480W 1 Phase / DRL-24V480W1A
Highlights & Features Universal AC input voltage Built-in constant current circuit for reactive loads Up to 88.0% efficiency Full power from -20 C to +50 C operation at 230Vac @ 5000 meters or 16400 feet
CliQ II DIN Rail Power Supply 24V 120W 2 Phase / DRP-24V120W2BN
Highlights & Features Designed for single phase input 180-305Vac (for L-N) or 2 of 3-Phase system 2 x 180-550Vac (for L-L) or 254-780Vdc Compact and corrosion resistant aluminium casing Up to 90.0% efficiency
CliQ II DIN Rail Power Supply 24V 480W 1 Phase / DRP024V480W1B
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 5 seconds and 200% for 2 seconds Full corrosion resistant aluminium chassis
CliQ II DIN Rail Power Supply 48V 240W 1 Phase / DRP048V240W1B
Highlights & Features Universal AC input voltage TNV-1 circuit approval to protection of equipment users from overvoltage on telecommunication networks Up to 92.0% efficiency Power Boost of 150% for 5
Safety Standards. Model Number:
LNP-C Highlights & Features Constant current design Input voltage from 198-264Vac Up to 89.5% efficiency Independent or built-in type Meets IEC/EN 61000-3-2, Class C Fixed output current IP20 assembly
CliQ DIN Rail Power Supply 24V 240W 3 Phase / DRP024V240W3AA
Highlights & Features Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed Designed for Class I Div. 2
Safety Standards. Model Number: Unit Weight:
MEA-250A24C Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1 Ed. & IEC 60950-1 Compliant with IEC 60601-1-2 3 th and 4 th Ed. Requirements IP22 ingress protection rating
CliQ II DC-UPS Module 24V 40A / DRU-24V40ABN
Highlights & Features Full corrosion resistant Aluminium chassis Suitable for 24V system up to 40A Built-in diagnostic monitoring for DC OK, Discharge and Battery Fail by relay contacts LED indicator for
CliQ II DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1B
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 5 seconds Full corrosion resistant aluminium chassis Conformal coating
040APS12 B MDS. MDS Medical AC-DC Open Frame 12Volt, 40Watt / MDS-040APS12 B ``` Highlights & Features. Safety Standards.
040APS12 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
Safety Standards. Model Number:
040APS15 B Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
CliQ II Buffer Module 24V 20A / DRB-24V020AB
Highlights & Features Full corrosion resistant aluminium chassis Minimum buffering time of 250ms @ 24V/20A Flexible operating buffering voltage modes: o Fixed mode at 22Vdc o Dynamic mode for V in -1V
CliQ DIN Rail Power Supply 24V 480W 1 Phase / DRP024V480W1AA
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds and 200% for 2 seconds Full corrosion resistant aluminium chassis
CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds Full corrosion resistant aluminium chassis SEMI F47 certified
Chrome DC-UPS Module 24V 10A / DRU-24V10ACZ
Highlights & Features Suitable for 24V system up to 10A Zero switch over time from loss of DC input to battery operation Built-in diagnostic monitoring for DC OK, Discharge and Battery Fail by relay contacts
CliQ II Buffer Module 24V 40A / DRB-24V040ABN
Highlights & Features Full corrosion resistant aluminium chassis Minimum buffering time of 200ms @ 24V/40A Flexible operating buffering voltage modes: o Fixed mode at 22Vdc o Dynamic mode for V in -1V
Safety Standards. Model Number:
040APS Highlights & Features Compliant to IEC 60601-1 3rd edition IT and medical safety approvals Low earth leakage Current (
PJ Open Frame Power Supply 12V 150W 1 Phase / PJ-12V150W
PJ Highlights & Features Universal C Input (85Vac 264Vac) Low Inrush Current / Low Leakage Current High efficiency and PF factor to conserve energy Conforms to harmonic current IEC/EN 61000-3-2, Class
TECHNICAL DATASHEET MDS Medical AC-DC Open Frame 065APS24 B Highlights & Features Safety Standards Model Number: Unit Weight Dimensions (W x L x H):
065APS24 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
Safety Standards. Model Number:
060AAS19 B Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
060AAS19 B MDS. MDS Medical AC-DC Adapter 19Volt, 60Watt / MDS-060AAS19 B. Highlights & Features. Safety Standards. Model Number: General Description
060AAS19 B Highlights & Features Safety Approvals to IEC 60601-1 3rd ed. & IEC 60950-1 Risk management report available Low touch current (
CliQ II Buffer Module 24V 20A / DRB-24V020AB
Highlights & Features Full corrosion resistant aluminium chassis Minimum buffering time of 250ms @ 24V/20A Flexible operating buffering voltage modes: o Fixed mode at 22Vdc o Dynamic mode for Vin -1V Supports
Safety Standards. Model Number:
065APS12 B Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (