MU Type Fiber Optic Connectors

Size: px
Start display at page:

Download "MU Type Fiber Optic Connectors"

Transcription

1 MU Type Fiber Optic Connectors HMU Series Back panel side Package side Features. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and IEC MU intermate test by NTT certified connector.. Flame resistant Satisfies flammability rating UL94-V. Backplane MU Backplane connector has a self-holding mechanism which does not transfer any force on the back panel when both side of connector assemblies are fully connected. Back panel side connectors can be removed or inserted even both sides are mated. 4. Wide Variety of adapter type Number of Fiber connections Type Single Duplex 4 way 8 way 6 way Board Mounting K K --- K --- Snap-in Panel Mounting & Screw Panel Mounting K K K K K. Simplified plugs and Receptacles Extremely small size (only.mm Plug length). MU simplified plug is designed for equipments inside connection. Applications Optical terminal equipment, optical relay racks, test equipment, telecommunication equipment and other systems requiring Small Form Factor optical connections. Please contact us if you have any requests. Hirose will offer excellent solutions to meet your requirements.

2 Product Specifications Ratings Operating temperature range - C to + C Storage temperature range - C to + C Optical Characteristics Item Test Method (IEC 6/JIS C 96) Specifications SM Wavelength nm (LD).dB max. (AdPC) Insertion Loss MM(GI) Wavelength nm (LED).dB max. (AdPC) SM Return Loss Wavelength nm (LD) 4dB min. (AdPC) MM(GI) Mechanical Characteristics Environmental Characteristics Engagement and Separation forces Ferrule with drawal force Cable retention (Straight pull) Durability (cycles, mating/unmating) Measured with corresponding connector. Extract zirconia gauge.49 ±. mm diameter Copper alloy split sleeve N to N from split sleeve. Zirconia split sleeve N to.n N tensile loads for one minute. times (Backplane) times (Plug) Simplex plug Engagement force:. N max. Separation force:. N max. Duplex plug Engagement force: N max. Separation force: N max. ) Insertion loss fluctuation after test:.db max. ) No visible damage, dislocation of clamp or cable. Vibration Frequency: to Hz, single amplitude of. mm, hours in each of the axis. Acceleration of 98 m/s, 6 ms duration, Shock ) Insertion loss fluctuation after test:.db max. sin half-wave waveform, cycles in each of the axis. ) No visible damage, cracks or part dislocation. Humidity - C to 6 C, humidity: 9% to 96% (Temperature/ humidity- cycles) cycles Change of Temprature - C to + C cycles Dry heat 96 hours at 8 C Cold 96 hours at - C Salt mist 48 hours in a % concentration of salt mist No significant corrosion. Materials Part Simplex plug housing Spring Ferrule Simplex adapter housing Adapter metal fittings Simplified receptacle housing Simplified plug Backplane connector housing Split sleeve Dust cap Material Synthetic resin Steel Zirconia Synthetic resin Stainless steel or copper alloy (Nickel plating) Synthetic resin Zirconia Synthetic resin Zirconia or copper alloy Synthetic resin 6

3 Function diagram Duplex plug Terminator Simplex plug 8-position Backpanel side HMUA-P-H or HMUA-P-H and HMUA-F-A** HMUA-TM-P HMUA-P-H or HMUA-P-H and HMUA-F-A** HMUB-L8HA- or HMUB-L8HB- Dust cap HMUB-DP- 8-position package side HMUB-L8PA- Back panel Thickness:.4mm or.mm Package Gold plate Duplex backpanel side HMUB-LHA- or HMUB-LHB- Sleeve holder Dust cap Duplex package side Simplex J plug HMUB-SH- HMUB-DJ- HMUB-LPA- HMUAJ-P-H or HMUAJ-P-H and HMUA-F-A** Terminator HMUAJ-TM-P

4 Plug Housings Simplex Plug Housing for mm cable Part Number CL No. Boot color HMUA-P-H() Blue HMUA-P-H() --8- Light purple Simplex Plug Housing for.9mm fiber Part Number CL No. Boot color HMUA-P.9-H() -8-- Blue HMUA-P.9-H() -9-- Light purple Duplex Plug Housing for mm cable Part Number CL No. Boot color HMUA-P-H() Blue HMUA-P-H() --- Light purple Duplex Plug Housing for.9mm fiber Part Number CL No. Boot color HMUA-P.9-H() -6-- Blue HMUA-P.9-H() -6-- Light purple Simplex Plug Housing for.mm Cable Part Number CL No. Boot color HMUA-P.-H --9 Light purple Note: Ferrules, HMUA-FA-A*() should be needed for this plug. (see page 9) Certain assemble tools are also needed. Please contact sales representative for the details. 8

5 Ferrules For MU plugs Ø..6 Ø.49±. +. ØA (Hole diameter) Ø (Hole diameter) Ø Part Number CL No. A dimension Applicable Fiber cable HMUA-F-A() HMUA-F-A() ---. SM,MM HMUA-F-A6() For HMUA-P. -H* plugs Ø..6 Ø.49±. ØA +. (Hole diameter) Ø.6 (Hole diameter) Ø. Ø Part Number CL No. A dimension Applicable Fiber cable HMUA-FA-A() HMUA-FA-A() SM,MM HMUA-FA-A6()

6 Adapters Simplex Adapter / Snap-in Panel Mounting MU-A Panel thickness:.6mm.8 HMUA-A- --8 Zirconia Simplex Adapter / Screw Panel Mounting MU-AS Ø ± Ø.4 +. or -M.4 HMUA-AS- -4- Zirconia Simplex Adapter / Board Mounting BBoard Mounting Pattern MU-A MU-A 9..4.±. 4-Ø.4± ±. 6.6 Board thickness:.6mm. HMUA-AH- -- Zirconia

7 Duplex adapter / Snap-in Panel Mounting 4.mm Type 4. MU-A Panel thickness:.6mm HMUA-A Zirconia Duplex Adapter / Screw Panel Mounting 6.mm Type 6. Refer to page for details. HMUA-AK Zirconia Note:The outer dimension is the same as the above "HMUA-A-4". Duplex Adapter / Screw Panel Mounting Duplex Adapter / Board Mounting BBoard Mounting Pattern ±. ± Ø.4 +. or -M.4. ±.. ±. 4- Ø.4 ±. Board thickness:.6mm HMUA-AS Zirconia HMUA-AH Zirconia

8 Position Adapter / Snap-in Panel Mounting 6.8 MU-8A Panel thickness:.6mm HMUA-8A Zirconia 8-Position Adapter / Screw Panel Mounting 6 MU-8AS ±. ± Ø.4 4 -Ø.4 +. or -M.4 HMUA-8AS- --9 Zirconia 8-Position Adapter / Board Mounting MU-8A 6. BBoard Mounting Pattern 9 4.6±..± Ø.4±. Board thickness:.6mm HMUA-8AH- -6- Zirconia

9 Cost effective adapters 8-Position Adapter / Screw Panel Mounting Ø Ø.4 +. or -M ±. 6-Position Adapter / Screw Panel Mounting D B D B F 9 F 9 Panel thickness:.6mm HMUA-8A- -- Zirconia HMUA-8A-B -9-8 Copper alloy -Ø.. 6 MU-6A - Ø.4 +. or -M ± Panel thickness:.6mm HMUA-6A- -4- Zirconia HMUA-6A-B -- Copper alloy

10 Angled Adapters Duplex Angled Adapter / Snap-in Panel Mounting. +. (4 ) Mounting Angle HMUA-A Zirconia 4 4-Position Angled Adapter / Snap-in Panel Mounting Panel thickness:.mm. +. (4 ) Panel thickness:.mm Mounting Angle HMUA-4A Zirconia 4 4

11 Backpanel side Connector Housings Duplex Backpanel side Connector Housing 4-R.8 max..89± ± (-R) LHA ±..±. 8.±. (-R) Part Number CL No. Panel thickness HMUB-LHA mm HMUB-LHB- -8-.mm Note: Screw fastening torque:.nm 8-Position Backpanel side Connector Housing L8AH 4. 8-R.8 max..89± (4-R) ± Part Number CL No. Panel thickness HMUB-L8HA mm HMUB-L8HB- --.mm Note: Screw fastening torque:.nm

12 Package side Connector Housings Duplex Package side Connector Housing 9 BBoard Mounting Pattern.8 Ø. ±..8 ± ±. Part Number CL No. HMUB-LPA- -- Note : Screw fastening torque :.Nm. 8. LPA. ±. 4 pieces attached 4 pieces attached..8 Ø. ±. M.4 M.4 8-Position Package side Connector Housing 9 BBoard Mounting Pattern 6.4 Ø.±..8±. 8.6±..8. Part Number CL No pieces attached 4 pieces attached 9.±. Ø. ±. HMUB-L8PA- -6- Note : Screw fastening torque :.Nm L8PA. M.4.8 M.4 Sleeve Holder 8. Ø. Ø.9 Gold plated section HMUB-SH- -- Zirconia Note:This Sleeve Holder should be used for duplex and 8-position package side connector housing and J Plug Housing connector plug. Insert the Sleeve Holder using dedicated tool #HMUB-TS-. The gold plated section of the Sleeve Holder should be inserted into the package side connector housing. 6

13 J Plug Housing Simplex J Plug Housing for.9mm fiber Part Number CL No. Boot color HMUAJ-P.9-H() -6-- Blue HMUAJ-P.9-H() Light purple

14 Simplified Receptacles Simplex Simplified Receptacle / Screw Panel Mounting Ø.4. ± M U S R - Ø.4 +. or -M.4. 4 HMUA-SR Zirconia HMUA-SR-B -8-4 Copper alloy position Simplified Receptacle / Screw Panel Mounting 4. MU 8SR Ø.4 -Ø.4 +. or -M ±. 8 HMUA-8SR- I -- Zirconia HMUA-8SR-B -46- Copper alloy 8. 8

15 8-position Simplified Receptacle - for extremely high density applications F D B 9 F D B 9 8. HMUA-8SR- I -68- Zirconia HMUA-8SR-B -- Copper alloy 6-Position Simplified Receptacle - for extremely high density applications HMUA-6SR- -- Zirconia HMUA-6SR-B -- Copper alloy BMounting Example a 9

16 Simplified Plug Simplex simplified Plug for.9mm fiber Ø.49±. +. ØA (Hole diameter). +.. Part Number CL No. A dimension Ferrule Applicable Fiber cable HMUA-FK-A(4) HMUA-FK-A(4) Zirconia SM, MM HMUA-FK-A6(4) Split Sleeve HMUA-D() -4-- Zirconia HMUA-SLIT-SLEEVE() --- Copper alloy Extraction Tool for Simplified Plug... Part Number CL No. HMUA-FK-T -48-6

17 Attachment for Simplex Receptacle 4. Ø6 M. Ø. Ø. Ø4.4 HRPI-R-L Insert straight the MU-RA type receptacle attachment and tighten the screw. Part Number CL No. HMUA-RA- -4- For optical power (or other measurements) join the Receptacle Attachment using the tool HRPI-R-L and attach to a sensor or measuring instrument. Dust Caps Dust Cap for Backpanel side connector housings Part Number CL No. Applicable connector HMUB-DP- --4 Back panel side housing Dust Cap for Package side connector housings Ø. Ø4.4 MUDJ Ø6 4.6 Part Number CL No. Applicable connector housing HMUB-LPA- HMUB-DJ- -6- HMUB-L8PA- Dust Cap for Adapters Part Number CL No. Applicable connector HMUA-DP- -- Adapter, simplified receptacle

18 Cable assemblies Simplex Plug Cable assembly Part Number CL No. Connector Installation End Applicable Fiber cable Polishing type Cable Diameter HMUA-ASP-FQ-L -8-4 SM-9./ HMUA-ASP-FQ-L -9- AdPC Ømm HMUA-ASP-FP-L - GI-/ HMUA-ASP-FP-L --9 Duplex Plug Cable assembly Part Number CL No. Connector Installation End Applicable Fiber cable Polishing type Cable Diameter HMUA-ASP-FQW-L - HMUA-ASP-FQW-L -6- HMUA-ASP-FPW-L - HMUA-ASP-FPW-L -9-9 SM-9./ GI-/ Note : The "L" within the Part Number indicates the length of the cable illustrated the drawings. Please specify "L" in mm. Note : Please contact HIROSE for other specifications. AdPC Ømm

19 Simplex Plug Cable assembly L + % L + % Part Number CL No. Connector Installation End Applicable Fiber cable Polishing type Cable Diameter HMUA-ASPH-FL-L -- SM-9./ HMUA-ASPH-FL-L --4 AdPC Ø.9mm HMUA-ASPH-FM-L -- GI-/ HMUA-ASPH-FM-L -4- Duplex Plug cable assembly L + % L + % Part Number CL No. Connector Installation End Applicable Fiber cable Polishing type Cable Diameter HMUA-ASPK-FL-L -- HMUA-ASPK-FL-L -6- HMUA-ASPK-FM-L --8 HMUA-ASPK-FM-L -8- SM-9./ GI-/ Note : The "L" within the Part Number indicates the length of the cable illustrated the drawings. Please specify "L" in mm. Note : Please contact HIROSE for other specifications. AdPC Ø.9mm

20 Simplex J Plug cable assembly Part Number CL No. Connector Installation End Applicable Fiber cable Polishing type Cable Diameter HMUAJ-ASP-FQ-L -4- SM-9./ HMUAJ-ASP-FQ-L -4- AdPC Ømm HMUAJ-ASP-FP-L - GI-/ HMUAJ-ASP-FP-L - Simplex J Plug cable assembly L + % L + % Part Number CL No. Connector Installation End Applicable Fiber cable Polishing type Cable Diameter HMUAJ-ASPJ-FL-L -9- SM-9./ HMUAJ-ASPJ-FL-L -6- AdPC Ø.9mm HMUAJ-ASPJ-FM-L -6- GI-/ HMUAJ-ASPJ-FM-L -6-8 Note : The "L" within the Part Number indicates the length of the cable illustrated the drawings. Please specify "L" in mm. Note : Please contact HIROSE for other specifications. 4

21 Tools Insertion / Extraction Tool for Plug Part Number CL No. Color of Tip Remarks HMUA-TP- -4- Blue For Conventional Adapters HMUB-TP- --4 Brown For MU Backplane system Insertion / Extraction Tool for Plug Cost effective type Part Number CL No. HMU/HEMD-B - Extraction Tool for J Plug Part Number CL No. HMUB-TJ- -6- Insertion / Extraction Tool for Sleeve Holder Part Number CL No. HMUB-TS- --

22 Crimp Tools Part Number CL No. Applicable plug housing HMUA-P-H,H HMUA-TK- - HMUA-P-H,H Part Number CL No. Applicable plug housing HMUA-TK- - HMUAJ-P-H,H Stop Ring Insertion Tool Part Number CL No. Applicable connector HMUA.J/PR-MD MU plug housings except HMUA-P.-H 6

MU Type Fiber Optic Connectors

MU Type Fiber Optic Connectors Type Fiber Optic Connectors Features H Series Back panel side. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and IEC 64-6. intermate

More information

MU Type Fiber Optic Connectors

MU Type Fiber Optic Connectors Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. MU Type Fiber Optic Connectors HMU Series Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with

More information

SC Type Fiber Optic Connectors

SC Type Fiber Optic Connectors Type Fiber Optic Connectors H Series Attenuators POF / PCF Terminators Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with IEC 61754-4 and JIS C 573(F4). intermate

More information

SC Type Fiber Optic Connectors

SC Type Fiber Optic Connectors SC Type Fiber Optic Connectors HSC Series MU SC FC Features 1. JIS, IEC standards compliant and fully intermateable with NTT's SC products. JIS C 573 (F04 type fiber optic connectors) IEC 61754-4 2. Plugs

More information

FC Type Fiber Optic Connectors

FC Type Fiber Optic Connectors FC Type Fiber Optic Connectors HRFC Series MU SC FC Features 1. JIS, IEC standards compliantand and fully intermateable with NTT's FC products. JIC C 597 (F1 type fiber optic connectors). IEC 61754-13

More information

FC Type Fiber Optic Connectors

FC Type Fiber Optic Connectors Type Fiber Optic Connectors HR Series Features 1. JIS, IEC standard compliant and intermateability test certified. Comply with IEC 61754-13 and JIS C 5970(type F01). intermate test by NTT certified connector.

More information

SC Type Fiber Optic Connectors

SC Type Fiber Optic Connectors SC Type Fiber Optic Connectors SC HSC Series FC Jan.1.2018 Attenuators Copyright 2018 HIROSE Environment ELECTRIC CO., LTD. MU All Rights Reserved. Features 1. IEC, JIS standard compliant and intermateability

More information

0.4 mm Pitch, Space-saving Interface Connectors

0.4 mm Pitch, Space-saving Interface Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.

More information

DIAMOND Fiber Optic Components

DIAMOND Fiber Optic Components DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2000 Simplex PC/APC MULTIMODE PC Constant innovation in the field of fiber optics has created demand for products with ever increasing performance

More information

SPECIFICATION SINGLEMODE MULTIMODE. Premium Connector 0.08dB Typical 0.15dB Typical Standard Connector 0.12db Typical 0.20db Typical Return Loss

SPECIFICATION SINGLEMODE MULTIMODE. Premium Connector 0.08dB Typical 0.15dB Typical Standard Connector 0.12db Typical 0.20db Typical Return Loss 12 FC Connector Best used in single mode applications and known for exceptionally accurate positioning, the FC or Fixed Connection Connector is designed for use in unstable environments because of their

More information

DIAMOND Fiber Optic Components

DIAMOND Fiber Optic Components DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS F-3 Simplex PC/APC MULTIMODE PC Telecommunications and Fiber Optics are developing at an incredible speed. To keep up with tomorrow s requirements

More information

Connector SPECIFICATION SINGLEMODE MULTIMODE. 126μm +1/-0 Concentricity: 1μm. 127μm 125μm +1/-0 Concentricity: : 1μm

Connector SPECIFICATION SINGLEMODE MULTIMODE. 126μm +1/-0 Concentricity: 1μm. 127μm 125μm +1/-0 Concentricity: : 1μm 24 LC-UPC Unibody BTW Boot 2.0mm Round Connector Insertion Loss 0.08dB typical UPC 0.10dB typical APC 0.15dB typical 0.04dB typical Super Low Loss 55dB typical UPC 65dB typical APC Durability < 0.2dB typical

More information

Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard

Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission

More information

USB 2.0 Standard Connectors

USB 2.0 Standard Connectors USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization

More information

Modular Jack Connectors for High-Speed LAN Transmission

Modular Jack Connectors for High-Speed LAN Transmission Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B

More information

Ultra-small Rack/Panel Crimp Connectors

Ultra-small Rack/Panel Crimp Connectors All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

Modular Jack Connectors for High-Speed LAN Transmission

Modular Jack Connectors for High-Speed LAN Transmission Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Dec..207 Copyright 207 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Supports High-Speed LAN Transmission

More information

AMPMODU* MOD I Interconnection System

AMPMODU* MOD I Interconnection System Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection

More information

Interface Connectors for Miniature, Portable Terminal Devices

Interface Connectors for Miniature, Portable Terminal Devices All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

USB 2.0 Standard Connectors

USB 2.0 Standard Connectors USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization

More information

Modular Jack Connectors for High-Speed LAN Transmission

Modular Jack Connectors for High-Speed LAN Transmission NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements

More information

FISCHER MINIMAX TM SERIES

FISCHER MINIMAX TM SERIES TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases

More information

METRIC MIL-C-83522/16B w/amendment 1 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET

METRIC MIL-C-83522/16B w/amendment 1 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET METRIC MIL-C-83522/16B 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER

More information

Electrical Components Catalog Universal MATE-N-LOK Connector System

Electrical Components Catalog Universal MATE-N-LOK Connector System Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation

More information

Meet requirements of USB 2.0

Meet requirements of USB 2.0 NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission

More information

DIAMOND Fiber Optic Components

DIAMOND Fiber Optic Components DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2 Backplane PC/APC MULTIMODE PC Enthusiastic customers using the E-2 TM connector system on their equipment encouraged the development of

More information

Mating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX

Mating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial

More information

Cannon 50 Ohm Connectors

Cannon 50 Ohm Connectors SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial

More information

SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions

SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,

More information

Mini PCI Express Card Socket

Mini PCI Express Card Socket Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents

More information

SERIES MCX 50 MICRO MINIATURE CONNECTORS

SERIES MCX 50 MICRO MINIATURE CONNECTORS SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications

More information

Our Most Important Connection is with You. OSIS SECTION 7. OSIS Series

Our Most Important Connection is with You. OSIS SECTION 7. OSIS Series SECTION 7 OSIS OSIS Series Contents Introduction : One Step Interconnect Solution...7-3 Applications...7-3 International Standard Documents Compliance...7-3 Features and Benefits...7-3 Characteristics

More information

DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER FERRULE, EPOXY

DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER FERRULE, EPOXY METRIC MIL-DTL-83522/16C 28 June 2013 SUPERSEDING MIL-C-83522/16B 11 May 1995 DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER

More information

7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits

More information

Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch

Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch 1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where

More information

LX.5 (SFOC 1.25) High packing density. High performance. High reliability. High safety. High flexibility

LX.5 (SFOC 1.25) High packing density. High performance. High reliability. High safety. High flexibility Today, packing density is more important than ever. The LX.5- connector, based on the proven 1.25 mm ferrule technology, is the only standardized small form factor connector combining high packing density,

More information

1 : LC/PC 0 : None S : Simplex 09 : 0.9mm G : Green W : White. A : LC/APC S : SM D : Duplex 20 : 2.0mm L : Blue. M : MM 30 : 3.

1 : LC/PC 0 : None S : Simplex 09 : 0.9mm G : Green W : White. A : LC/APC S : SM D : Duplex 20 : 2.0mm L : Blue. M : MM 30 : 3. LC Connector The LC connector was the first small form factor connector on the market. The use of a high performance 1.25 mm ferrule gives the connector extremely high performance characteristics. The

More information

DIAMOND Fiber Optic Components

DIAMOND Fiber Optic Components DIAMOND Optic Components NETWORK ACCESSORIES Attenuators Family PC/APC MULTIMODE PC DESCRIPTION Attenuators are used to adapt the transmitted light power to the characteristics of the implanted receiver.

More information

C o n n e c t o r s C h a p t e r 183

C o n n e c t o r s C h a p t e r 183 Connectors Chapter 5 183 Connectors Contents Copper RJ45 FAMILY 700A8 185 LC FAMILY LC Connectors 186 LazrSPEED 189 LC Couplings 190 SC FAMILY SC Connectors 191 SC Connector Clip 192 SC Couplings 193 ST

More information

Interface Connectors for Portable Terminal Devices

Interface Connectors for Portable Terminal Devices Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.

More information

ZB4BA73134 green flush/red projecting/green flush tripleheaded pushbutton Ø22 with marking

ZB4BA73134 green flush/red projecting/green flush tripleheaded pushbutton Ø22 with marking Characteristics green flush/red projecting/green flush tripleheaded pushbutton Ø22 with marking Main Range of product Product or component type Device short name Bezel material Mounting diameter Sale per

More information

minisd TM Card Connectors

minisd TM Card Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

OSIS by Radiall One Step Interconnection Solution

OSIS by Radiall One Step Interconnection Solution FIBER OPTIC AND MULTISIGNAL APPLICATIONS OSIS by Radiall One Step Interconnection Solution Introduction The easiest outdoor interconnection solution: in only one click! To meet the requirements of telecommunication

More information

Electrical Test voltage (Vrms) Service sea level at m M I II

Electrical Test voltage (Vrms) Service sea level at m M I II Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522

More information

v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.

v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo

More information

Interface Connectors for Portable Terminal Devices

Interface Connectors for Portable Terminal Devices Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series

More information

Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.

Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to

More information

SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information

SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit   for more information SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...

More information

Interface Connectors for Portable Terminal Devices

Interface Connectors for Portable Terminal Devices Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output

More information

ITS-Z0344 Half Pitch Interface Connectors

ITS-Z0344 Half Pitch Interface Connectors All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

CONTENTS. Introduction Characteristics Product range. Pages

CONTENTS. Introduction Characteristics Product range. Pages R2CT TM Series R2CT CONTENTS R2CT TM Pages Introduction... 9-4 Characteristics...9-5 Product range R2CT TM standard plug kit...9-6 R2CT TM mini short plug kit... 9-7 R2CT TM standard receptacle...9-8 R2CT

More information

Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series

Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series CONNECTOR MB-0281-3

More information

SMA SERIES COAXIAL CONNECTORS

SMA SERIES COAXIAL CONNECTORS General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead

More information

07. har-link INTERFACE CONNECTORS

07. har-link INTERFACE CONNECTORS . INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism

More information

Table 1. Termini Types

Table 1. Termini Types 1. SCOPE. This NAVSEA Drawing covers multiple removable pin termini and socket termini which are required for circular, plug and receptacle style, fiber optic connectors respectively. The connector plugs

More information

SMU-C2 Series MU HOUSING - for ø 2 mm cord -

SMU-C2 Series MU HOUSING - for ø 2 mm cord - DOCUMENT NUMBER S05-H079-01E MU HOUSING - for ø 2 mm cord - TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477

More information

Commercial MATE-N-LOK Connectors

Commercial MATE-N-LOK Connectors MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe

More information

3 No Polish LC 50um Multimode Connector Environmental and Mechanical Test Report

3 No Polish LC 50um Multimode Connector Environmental and Mechanical Test Report January 009 No Polish LC 0um Multimode Connector Environmental and Mechanical Test Report Page Introduction The focus of this document is to report the results from a series of environmental and mechanical

More information

Right angle press-fit D-Sub connectors

Right angle press-fit D-Sub connectors Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN

More information

07. har-link Interface Connectors

07. har-link Interface Connectors . Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism

More information

2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)

2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X

More information

FMT4S. High Density Connectivity Solution

FMT4S. High Density Connectivity Solution FMT4S High Density Connectivity Solution 2 FMT4S Solution Illustration FMT4S Optical Distribution Frame (ODF) FMT4S series is an advanced ODF series offering premium quality Data Center connectivity solution.

More information

Product information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330

Product information 19 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330 Product information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330 1 Pcs. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius 40 mm, fastening material, labeling strips and

More information

AEROSPACE, DEFENSE & MARINE /// MC801 FIBER OPTIC CONNECTORS

AEROSPACE, DEFENSE & MARINE /// MC801 FIBER OPTIC CONNECTORS MC801 FIBER OPTIC CONNECTORS RUGGED, RELIABLE CONNECTIVITY COMBINING HIGH-PERFORMANCE ARINC 801 TERMINI WITH THE VERSATILITY AND FAMILIARITY OF D38999 SERIES III STYLE CONNECTORS MC801 FIBER OPTIC CONNECTORS

More information

0.6 mm Pitch, Docking Station Connectors

0.6 mm Pitch, Docking Station Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

LC Connectors and Adapters

LC Connectors and Adapters , Adapters and Cable Assemblies meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, singlemode and multimode options LC connectors reduce space requirements

More information

0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields

0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM

PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)

More information

Our Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M

Our Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel

More information

Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings

More information

FP 00C GS0 FP 00C HS0 FP 00C TS0 Crimpless Connector for Plastic Optical Fiber Data Sheet

FP 00C GS0 FP 00C HS0 FP 00C TS0 Crimpless Connector for Plastic Optical Fiber Data Sheet FP 00C GS0 FP 00C HS0 FP 00C TS0 Crimpless Connector for Plastic Optical Fiber Data Sheet DESCRIPTION The Firecomms crimpless connectors are for use with standard 1 mm core with 2.2 mm plastic optical

More information

Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5

Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5 Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70

More information

Series PC 3.5 precision subminiature connectors

Series PC 3.5 precision subminiature connectors Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable

More information

F-LINK INTER-CONNECT. Overview. Background. F-LINK Inter-Connect Solution

F-LINK INTER-CONNECT. Overview. Background. F-LINK Inter-Connect Solution F-LINK Inter-Connect Solution PRELIMINARY Overview Optical Cable Corporation (OCC ) introduces the F-LINK Inter-Connect platform, which is simply the most remarkable connector system ever conceived. Born

More information

ZB4BW963 blue flush illuminated pushbutton head Ø22 spring return for integral LED

ZB4BW963 blue flush illuminated pushbutton head Ø22 spring return for integral LED Characteristics blue flush illuminated pushbutton head Ø22 spring return for integral LED Main Range of product Product or component type Device short name Product compatibility Bezel material Head type

More information

Amphe-Lite Series contacts, sealing plugs, plastic dust caps

Amphe-Lite Series contacts, sealing plugs, plastic dust caps contacts, sealing plugs, plastic dust caps STANDARD CONTACTS FOR AMPHE-LITE SERIES Pin Socket 8 (Coax) 21-33102-21 21-33101-21 8 (Twinax) 21-33190-529 21-33191-530 10 (Power) 10-251415-105 10-407035-105

More information

DIAMOND Fiber Optic Components

DIAMOND Fiber Optic Components DIAMOND Fiber Optic Components E-2 Compact & Duplex CABLE ASSEMBLIES AND ADAPTES SINGLE MODE PC/APC MULTIMODE PC The E-2 COMPACT and DUPLEX combine the optical and mechanical performances of the E-2 simplex

More information

Connector Built-in U-shaped Micro Photoelectric Sensor. Approximately 60 % of previous model Detachable

Connector Built-in U-shaped Micro Photoelectric Sensor. Approximately 60 % of previous model Detachable 44 Connector Built-in Micro Photoelectric SERIES Related Information General terms and conditions... F-1 Glossary of terms... P.1~ selection guide... P.441~ General precautions... P.140 Amplifier Built-in

More information

INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST

INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7

More information

2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces

2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces 2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors

More information

zsfp+ (Small Form-factor Pluggable Plus) 25 Gbps Interconnect System

zsfp+ (Small Form-factor Pluggable Plus) 25 Gbps Interconnect System Molex launches the first complete for serial channels, delivering unparalleled signal integrity with superior EMI protection for next-generation Ethernet and Fibre Channel applications Molex s complete

More information

Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc.

Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc. Section Index Connectors Specifications... 93 Flexible Cable... 95 Panel Mount... 99 Bulkhead... 100 PCB Mount... 101 In Series Adaptors... 103 Other Information Assembly Instructions... 176 Cable Assembly...

More information

PERFORMANCE SPECIFICATION SHEET

PERFORMANCE SPECIFICATION SHEET INCH-POUND MIL-PRF-29504/5D 20 December 2006 SUPERSEDING MIL-PRF-29504/5C 29 July 2004 PERFORMANCE SPECIFICATION SHEET TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, SOCKET TERMINUS,

More information

0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY

0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY ONLINE CATALOG SWITCHCRAFT, INC. N. Elston Ave. Chicago, IL 00 77 79-700 FAX: 77 79-19 www.switchcraft.com EN MINI WEATHERTIGHT CONNECTOR SERIES EN CORD CONNECTOR 1.8 [9.8] 0. REF 0.70 dia. [17.8] PIN

More information

SMA Connectors. RF Coax Connectors. Product Facts

SMA Connectors. RF Coax Connectors. Product Facts SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes

More information

(MR) Miniature Rectangular Connectors (Continued)

(MR) Miniature Rectangular Connectors (Continued) Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug

More information

Introduction to High Current Card Edge Connectors

Introduction to High Current Card Edge Connectors Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled

More information

ZB4BD2 black selector switch head Ø22 2-position stay put

ZB4BD2 black selector switch head Ø22 2-position stay put Characteristics black selector switch head Ø22 2-position stay put Main Range of product Product or component type Device short name Bezel material Mounting diameter Head type Sale per indivisible quantity

More information

LEAD Fiber Optics PRODUCT CATALOGUE

LEAD Fiber Optics PRODUCT CATALOGUE LEAD Fiber Optics PRODUCT CATALOGUE OPTICAL TERMINATOR TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http:// Optical Terminator Optical Terminators are used to terminate unused fiber connector ports in

More information

ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic

ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently

More information

Standard Size Rotaries Series HS TS PS

Standard Size Rotaries Series HS TS PS Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical

More information

Nuclear Power Generation Range 8N45 SERIES. Reactor Containment Certified Connectors

Nuclear Power Generation Range 8N45 SERIES. Reactor Containment Certified Connectors Nuclear Power Generation Range 8N45 SERIES Reactor Containment Certified Connectors 1 8N45 SERIES Product Overview 8N45 Product Keys Description: Class 1E qualified connectors Quick connect ¼ turn bayonet

More information

13-SDMS-01 REV SDMS-01, REV.00 SEC DISTRIBUTION MATERIALS SPECIFICATION DATE: G

13-SDMS-01 REV SDMS-01, REV.00 SEC DISTRIBUTION MATERIALS SPECIFICATION DATE: G 13-SDMS-01 REV. 00 SPECIFICATIONS FOR FIBER OPTIC CONNECTIVITY COMPONENTS (PATCH CORDS, PIGTAILS, FAN-OUT CABLES AND CONNECTORS FOR INTERNAL INSTALLATIONS) This specification is property of SEC and subject

More information

SSC-PE Series Single mode SC CONNECTOR PLUG

SSC-PE Series Single mode SC CONNECTOR PLUG DOCUMENT NUMBER S05-H048-02E Single mode SC CONNECTOR PLUG TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477

More information

Application Note AN114

Application Note AN114 Application Note AN114 Fiber Optic Cabling System for Fiber Optic Rotational Sensors in Industrial Environments Objective This application note provides the engineer with guidance on designing and procuring

More information

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective

More information

PGA / BGA / PLCC SOCKETS

PGA / BGA / PLCC SOCKETS PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169

More information

07. har-link Interface Connectors

07. har-link Interface Connectors . Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism

More information

Singlemode SC Connector Kits Polymer Crimp Body. Housing Boot. 3.0 mm Jacketed. Simplex Blue Blue. Duplex Blue Blue

Singlemode SC Connector Kits Polymer Crimp Body. Housing Boot. 3.0 mm Jacketed. Simplex Blue Blue. Duplex Blue Blue One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules For 125 µm cladding diameter

More information

ZB4BA6. Main. Sale per indivisible quantity 1. Shape of signaling unit head Round. IP66 conforming to IEC IP69K IP69

ZB4BA6. Main. Sale per indivisible quantity 1. Shape of signaling unit head Round. IP66 conforming to IEC IP69K IP69 Product datasheet Characteristics ZB4BA6 Main Range of product Harmony XB4 Product or component type Head for non-illuminated push-button Device short name ZB4 Bezel material Chromium plated metal Mounting

More information