HYC1216 Installation Guide. Digital Surveillance. Installation Guide HYC-1216

Transcription

1 Digital Surveillance Installation Guide HYC-1216

2 Content Main Function Features Page Packing Content Basic Kit Packing Content, Option Packing Content 2, 3 Set, Board Specification Recommended Set Specification, Board Specification 4, 5~6 Connection Description Board Connection Description, Connection with Extension Board 7,8~10 Connection Cable Description, Connection in Set 11, 12~13 Connection in Board Kit, Audio Connection 14~16, 17~18 OS and Driver Instalation, Resolution Setup, HDD Partition 19~21,22,23 SW Instalation Automatic SW instalation(ptz USB Driver) and Check points 24~27 Manual Driver Instalation and Check Points 28~33 Instaled SW description 34~37 DVR Window Description 38

3 Basic Board Kit Packing Content Basic Component HYC2416 or HYR1216 DVI 16 BNC 2RCA cable Watch-dog cable 2 Audio Cable DIO0404 PTZ Board Install CD USB cable RS422/485 cable 40 pin box cable 10 Pin Box Cable. Drivers. Software package. Manual. Other Application. Quick Install Guide 2

4 Option Packing Content Option Component EIO pin Box cable Audio16 D-sub 9pin 8 RCA cable X2 5pin Molex cable X4 Loop out 16 X2 D-sub 15pin 8 BNC cable X 4 40pin Box cable X2 3

5 Recommended Set Specification Item Specification Recommend Mother CPU Memory Intel 845 chip Over(VGA Express Support) Intel Celeron 3.0 Over (When using Video server use Intel Pentium 4 3.0GHz and over) 512MB VGA AGP/PCI Express ATI Power HDD N.B 300W Over SATA 250GB. When PCI chip set is not Intel chip set, please ask us and test (VIA, SIS, etc). VGA: 64MB Geforce (NVIDIA), ATI both Available Resolution: 1023X768, Color Resolution: 32bit 4

6 Board Specification HYC1216 ITEM Video Channel Display Audio channel Codec Audio codec Recording Size 16CH input 120/100 fps 2 (option 16-On Demand) Modified Mpeg4 PCM D1(704x480), 2CIF(704x240), CIF(352x240) Recording frame(at CIF) 120 fps Channel fps per CH Full, 1/2, 1/4,1/16,1/32 5

7 Board Specification Recording Mode Record Size (CIF ) DI/DO Pan/Tilt Port TV-out Loop out Watchdog PCI Slot type Multi board Support Network Codec VBR 2~3KB per 1 frame 16/4, DI (voltage Support) RS422/485 port (default USB serial converter) 1ch switching Spot monitor Option Loop-Out Software / Hardware watchdog PCI Not support Software Modified Mpeg4 6

8 Board Connection Description 40 pin box connector Camera input X16 DVI Connector Camera input X16 TV-out X1 40 pin box connector DIO 2x2 jumper pin Watch dog 2pin Molex Connector TV-out 6 jumper pin Chip program pin 7

9 Board connection with Extension Board DIO/PTZ Video input Video output 8

10 Board connection with Extension Board DIO card Item DIO0404 DIO1604 P/T/Z Image DI(Sensor IN) 16 EA 4 EA DO(Alram out) 4 EA 4 EA P/T/Z Support Support 9

11 Extension Boards Back panel 16 (Option) LoopoutEXT16(option) 1: J1~J16: Camera input connector (BNC) 2: J17 TV output connector (BNC) 3: J19, j20: 40Pin Box Connector (Video input) 4: J18: Video output This card connects the D-Sub and the 40 pin connector. It is used for 16 channel video loop-out or 16 channel video input. 10

12 Connection Cables description Name Image Function DVI 16BNC /1RCA Cable Camera 16EA TV-out 1EA 2 RCA Audio Cable Sound Card Line In cable (Connect Microphone) 40pin Box Cable To connect DIO Back panel connection 10 pin Box Cable Connect DIO (P/T/Z) with mother (in USB) 2pin Header Cable Molex 2pin Cable Connect Watch dog cable Mother Board with Reset Connect DVR with Back panel TVout connector 11

13 Board Connection Description (Set) In connecting Watch Dog Check +. (Ground) - + Mother board (PC) Mother board (PC) 12

14 Board Connection Description (Set)

15 Board Connection Description (Kit) BNC connector Video input RCA connector TV-out

16 Board Connection Description (Kit) BNC connector Video input RCA connector TV-out

17 Board Connection Description (Kit) with Loop-out BNC connector Video input RCA connector TV-out BNC connector Video output (8 BNC cable) 16

18 Audio Connection(Set) Hardware connection Sound card setting (Playback) Line In Input Speaker Check the Mute <N.B> When <Line In Mute> is not checked, <Audio> continuously play 17

19 Audio Connection (Setting) Sound card setting (Recording) Click the Advanced control Select It varies according to recording card Check the Line IN Select Recording source 18

20 O/S and Driver Installation Available OS <N.B> We recommend users to use <Hyper-Thread support Windows> (XP, 2003, VISTA), and not to use Multi boot O/S. Please partition HDD before installing O/S. Uses can not make <IMAGEDB> in C driver, so can not save this in C driver Recommend O/S size: More than 10GB 19

21 O/S and Driver Installation MB Board driver installation Mother board driver VGA board driver Have to install its own Mother Board driver and VGA board driver. <N.B>If you installed the plug and play drivers during XP installation, it is not exact drivers, so please have to install its own driver in its own installation CD 20

22 O/S and Driver Installation Application In <Windows 2003 or 2003 Server>, there is no <Direct X>. So users have to install < VGA card driver install > together. In Direct X Version: 8.0 over You have to check 2 points. <Check Direct draw > Start => Run => Open Enter <dxdiag > and run. To check <Direct X > => In <Display> tab, have to check in < Direct draw> <Direct draw Acceleration> Desktop=>Properties=>Setup Tab =>Advanced => Troblesho0t=> HW acceleration

23 Resolution Setup Desktop => Properties=>Set Setup Resolution and Color quality -Resolution: 1024*768 and over -Color: True color 32bit Desktop => Properties=>Screen Saver =>Setup as <None> Desktop => Properties=>Screen Saver =>Power Turn off Monitor, Turn off hard disks as <None> And System standby as <None> 22

24 HDD Partition <N.B> Can not make Image DB in C drive, so users have to make other Drives in < Disk partition > before make Image DB.. 23

25 SW installation When inserting, it starts automatically Automatically run <Driver install, Program install, Image DB> User can set Installation type(softwares) DVR program install Driver Install 24

26 SW installation Must Select this (Do not Restart) 25

27 SW installation Make <Image DB > Select Drive Select Image DB Size Have to Restart System to apply Installation is done 26

28 Other SW installation Other drivers (PTZ USB driver etc) and application Installation Can select and install each driver and Application s user want 27

29 Manual DVR Driver Installation(When needs) DVR board (HYC1216) P/T/Z USB driver install HYC1216 Driver install 28

30 Manual DVR Driver Installation(When needs) Multimedia controller driver install (Capture) Reinstall drive click Driver 29

31 Manual DVR Driver Installation(When needs) Check the right Installation 30

32 Manual DVR Driver Installation(When needs) USB Serial converter driver install (CP2102) 31

33 Manual DVR Driver Installation(When needs) Check the right installation 32

34 Create Image DB After DVR program installation, in rebooting, DBTool starts automatically. Add Recovery <N.B> Please enter Workspace No as the same or lower Than available workspace. ( NB) Select E driver, Enter workspace No: 1802)=> Yes 33

35 Installed SW and description All DVR SW are installed In C:\program files\dvr. <N.B> All system file are installed in System Directory Folder Description Log: system log, event log, network log Log2wayS: 2way Audio Log Config: DVR Configuration files Image: DVR image Language: Language file(menu) in DVR 34

36 Exe Files description EXE File Description EXE file Description To load and run <ImageDB check and Recovery, DVR,exe, SEngine.exe, Schedulebackup.exe> <N.B>This has to run only in starting DVR, when runs again, that can make a problem.. Run DVR program(main, setting) Search Data Make ImageDB Check <Watermark> 35

37 Exe Files description EXE File Description EXE file Description Make AVI file Run by DVR Loader, and run <Schedule backup, Direct backup> SW. (Icon is running in Task bar) To Manual backup. To search Backup data in Backup SW To search Event and can see <System log, event log> 36

38 Exe Files description EXE File Description EXE file Description Virtual key program To give Event Data to client program (Shown Icon in Tray Bar) SW to support 2-Way Audio (Shown Icon in Tray Bar) To access <imagedb> by Remote Client (Shown Icon in Tray Bar) 37

39 First Running of DVR Live View Window Login DVR setup Recording Data Search P/T/Z control Camera & Alarm Information TDS, Live Audio, Image Control and ETC Screen Division Exit DVR 38