MAX3814 Evaluation Kit. Evaluates: MAX3814
|
|
- Isaac Peters
- 5 years ago
- Views:
Transcription
1 -04; Rev 0; /0 General Description The MAX4 evaluation kit (EV kit) simplifies evaluation of the MAX4 TMDS equalizer/driver. This EV kit allows for quick testing of the MAX4 with either a DVI or HDMI environment. The MAX4 EV kit is fully assembled and tested. Ordering Information PART TEMP RANGE IC PACKAGE MAX4EVKIT 0 C to +0 C TQFP Component List DESIGNATION QTY DESCRIPTION C C, C chip capacitors (00) C 0.4μF chip capacitor (00) C 0μF chip capacitor (00) C 000pF chip capacitor (00) C0 μf capacitor (005) C 00μF capacitor (0) J, J J HDMI connectors Molex Power jack,.mm CUI PJ-00A J4, J5 Test points Digi-Key 5000K-ND JU, JU, JU Jumper block, pins 0.in spacing L.μH inductor Coilcraft MSS5-MX R R4, R R0 00, ±% chip resistors (00) R5, R 0, ±% chip resistor (00) R, R (open) R 00 ±% chip resistor (00) R4 0k ±% chip resistor (00) U, U4 MAX4CHJ+ U, U DVI connector Molex U5 MAX55ETB U MAX4XR4-T U 5V wall plug switching power supply CUI DPS05000UPS-P5P-SZ MAX4 DVI/HDMI+ Equalizer Rev A Evaluation Board MAX4 Evaluation Kit Fully Assembled and Tested Includes AC-Powered Battery Eliminator Features Quick Start ) Connect the wall plug power supply (U) to the power jack J. Jumper JU to connect the board supply to the wall plug supply (WWART). ) For DVI use, connect the input cable/board to the DVI input and connect a DVI monitor or DVI receiver to the MAX4 EV kit output. Change jumper JU to enable DVI equalizer. Jumper JU can remain disabled. The default setting is LEVEL = with back terminations. ) For HDMI use, connect the cable or board to the HDMI input and connect a monitor or receiver to the HDMI output. Change jumper JU to enable the HDMI equalizer. The default setting is LEVEL = with back terminations. Other Adjustments ) To choose the lower power (LEVEL = 0) setting without the back termination resistors, remove resistors R, R, R, R4, and R5 for DVI channel. Install a 0Ω resistor for R. For the HDMI channel, remove R, R, R, R0, and R. Install a 0Ω resistor for R. ) To use a separate.v supply, move the supply select jumper (JU) to the EXT position. Then connect the.v supply V CC to J4 (.V) and ground to J5 (GND). See Figure. Scope Measurements The DVI and HDMI connectors make it difficult to make electrical measurements with an oscilloscope that has SMA connectors. To make such measurements with the MAX4 EV kit, adapter boards can be purchased from Tektronix. The part numbers are DVI-TPA-R-DI for the DVI socket and HDMI-TPA-P for the HDMI socket. You can also contact Maxim s Customer Applications Group for the MAX4 to get adapter board layouts. Table. Adjustment and Control Descriptions (See Quick Start First) NAME JU JU JU FUNCTION Selects external power supply or wall plug switching power supply (WWART). Selects enable/disable for DVI channel. Selects enable/disable for HDMI channel. Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at ---44, or visit Maxim s website at
2 U DDCCI DDCD VSYNC 5VP 5VG HPD BLUE HSYNC RED GREEN A_GND C C C ENABLE 0 5 VCC INA- INA+ LEVEL VEE OUTA+ OUTA- VEE 4 INB+ OUTB+ INB- 4 VCC 5 VCC OUTB- VEE 0 VEE OUTC+ INC+ INC- VCC IND+ IND- ENABLE 0 DIS JU U MAX4 OUTC- VEE OUTD- OUTD+ VEE 4 5 R4 R OPEN R R R R5 0Ω U DDCCI DDCD VSYNC 5VP 5VG HPD BLUE HSYNC RED GREEN A_GND DVI CONNECTOR DVI OUTPUT ENABLE DVI OUTPUT LEVEL DVI CONNECTOR INPUT R OUTPUT J HDMI CONNECTOR C4 C5 C 0 5 VCC INA- INA+ LEVEL VEE OUTA+ OUTA- VEE 4 INB+ OUTB+ INB- 4 VCC 5 VCC OUTB- VEE 0 VEE OUTC+ INC+ INC- VCC IND+ IND- ENABLE 0 U4 MAX4 OUTC- VEE OUTD- OUTD+ VEE 4 5 R0 R R J HDMI CONNECTOR R OPEN R 0Ω EN DIS JU DVI OUTPUT LEVEL HDMI OUTPUT ENABLE R 00Ω C 0.4μF REGULATOR 0 IN D GND C 0μF EXT. +.V J4 GND J5 U MAX4 GND RESET VCC C 000pF R4 0kΩ SS U5 INP MAX55 LX 4 PGND OUT 5 SHDN D L.μH JU C0 μf C0 μf C0 μf CUI PJ-00A J GND GND POS U WALL PLUG SUPPLY EXTERNAL DPS05000UPS-P5P-SZ WALL POWER-SUPPLY CONNECTOR Figure. MAX4 Customer Board Electrical Schematic
3 Figure. MAX4 Evaluation Kit Assembly
4 Figure. MAX4 Evaluation Kit Component Placement 4
5 Figure 4. MAX4 Evaluation Kit Component Side 5
6 Figure 5. MAX4 Evaluation Kit Ground Plane
7 Figure. MAX4 Evaluation Kit Power Plane
8 Figure. MAX4 Evaluation Kit Solder Side Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 0 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.
JU1 JU6, JU15 JU20. Maxim Integrated Products 1
9-9; Rev 0; /0 MAX9 Evaluation Kit General Description The MAX9 evaluation kit (EV kit) contains a flowthrough low-voltage differential signaling (LVDS) quad differential line driver (MAX9) and receiver
More informationMaxim Integrated Products 1
19-3093; Rev 0; 12/03 MAX3942 Evaluation Kit General Description The MAX3942 evaluation kit (EV kit) is an assembled demonstration board that provides electrical evaluation of the MAX3942 10.7Gbps modulator
More informationMaxim Integrated Products 1
9-904; Rev 0; 7/0 MAX406 Evaluation Kit General Description The MAX406 evaluation kit (EV kit) is a fully assembled and tested circuit board that uses the MAX406 lownoise microphone amplifier IC designed
More informationMAX3804 Evaluation Kit. Evaluates: MAX3804. Features DC-Coupled EV Kit SMA Connectors for All High-Speed Inputs and Outputs Fully Assembled and Tested
19-2821; Rev 1; 2/09 General Description The MAX3804 DC-coupled evaluation kit (EV kit) simplifies evaluation of the MAX3804 12.5Gbps settable equalizer. The EV kit enables full testing of the device functions
More informationMAX3872/MAX3874 Evaluation Kits
9-2767; Rev 0, 2/03 MAX3872/MAX3874 Evaluation Kits General Description The MAX3872/MAX3874 evaluation kits (EV kits) simplify evaluation of the MAX3872 and MAX3874 clock and data recovery with limiting
More informationMaxim Integrated Products 1
9-366; Rev ; 2/06 General Description The MAX8727 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains a pulse-width-modulated (PWM) step-up DC-DC converter.
More informationMAX14535E Evaluation Kit. Evaluates: MAX14535E
19-4510; Rev 0; 3/09 General Description The MAX14535E evaluation kit (EV kit) demonstrates the MAX14535E double-pole/double-throw (DPDT) analog switch featuring negative signal capability, low onresistance
More informationMAX3983 SMA Connector Evaluation Kit
19-3340; Rev 0, 7/04 MAX3983 SMA Connector Evaluation Kit General Description The MAX3983 SMA Connector evaluation kit (EV Kit) is an assembled demonstration board that provides electrical evaluation of
More informationMAX5097A Evaluation Kit. Evaluates: MAX5097A
19-0718; Rev 0; 1/07 MAX5097A Evaluation Kit General Description The MAX5097A evaluation kit (EV kit) demonstrates the MAX5097A in a standard application circuit demonstrating high efficiency. The EV kit
More informationR1, R2, R3 3 R4, R5, R6 3. Maxim Integrated Products 1
19-2163; Rev 0; 9/01 MAX7428 Evaluation Kit General Description The MAX7428 evaluation kit (EV kit) is an assembled and tested circuit board that demonstrates the MAX7428 standard-definition video reconstruction
More informationMaxim Integrated Products 1
9-97; Rev 0; 8/04 MAX406 Evaluation Kit General Description The MAX406 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that demonstrates the MAX406 logarithmic amplifier.
More informationMAX3161E Evaluation Kit. Evaluates: MAX3161E. Features
19-0803; Rev 0; 4/07 MX3161E Evaluation Kit General Description The MX3161E evaluation kit (EV kit) circuit demonstrates the RS-232/RS-485/RS-422 multiprotocol transceivers using the MX3161E IC. The circuit
More informationS Application Circuit with SATA Input/Output S Eye Diagram Test Circuit with SMA Inputs/ Outputs
19-4953; Rev 0; 9/09 MAX4951AE Evaluation Kit General Description The MAX4951AE evaluation kit (EV kit) provides a proven design to evaluate the MAX4951AE dual-channel buffer. The EV kit contains four
More informationMAX5591 Evaluation Kit/Evaluation System
19-3366; Rev 2; 4/06 MAX5591 Evaluation Kit/Evaluation System General Description The MAX5591 evaluation system (EV system) (MAX5591EVCMOD2) is a complete 8-channel, 12-bit data-generation system consisting
More information+Denotes lead-free and RoHS-compliant.
19-3107; Rev 0; 12/07 MAX1493 Evaluation Kit General Description The MAX1493 is a low-power, 4.5-digit analog-to-digital converter (ADC) with integrated liquid-crystal display (LCD) drivers. The MAX1493
More information+Denotes lead-free and RoHS-compliant
19-0997; Rev 0; 9/07 MAX4208 Evaluation Kit General Description The MAX4208 evaluation kit (EV kit) simplifies evaluation of the MAX4208 ultra-low offset/drift, adjustable gain, precision instrumentation
More informationS Complete 2:1 VGA Multiplexer S VGA Connections and Power S LED Indicators for Switch Connections S VGA Inputs/Outputs S Fully Assembled and Tested
19-5030; Rev 0; 10/09 MAX4885AE Evaluation Kit General Description The MAX4885AE evaluation kit (EV kit) is a fully assembled and tested circuit board that evaluates the MAX4885AE VGA 2:1 multiplexer.
More informationR23 R34 0. Maxim Integrated Products 1
19-2360; Rev 0; 3/02 MAX7432 Evaluation Kit General Description The MAX7432 evaluation kit (EV kit) is an assembled and tested circuit board that demonstrates the MAX7428, MAX7430, and MAX7432 standard
More information+Denotes lead-free and RoHS compliant. C38 C43, C62, C64, C65, C66, C68, C70, C72, C73, C74, C76 C44 C49, C67, C75 C63, C69, C71, C77
19-4354; Rev 0; 10/08 MAX17108 Evaluation Kit General Description The MAX17108 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the MAX17108 10-channel, high-voltage
More informationMAX4951C Evaluation Kit Evaluates: MAX4951C
19-5944; Rev 0; 6/11 MAX4951C Evaluation Kit General Description The MAX4951C evaluation kit (EV kit) provides a proven design to evaluate the MAX4951C dual-channel buffer. The EV kit contains four sections:
More informationMaxim Integrated Products 1
19-3717; Rev 1; 11/05 MAX1179 Evaluation Kit General Description The MAX1179 evaluation kit (EV kit) is an assembled and tested circuit board that demonstrates the MAX1179 analog-to-digital converter.
More informationS Proven PCB Layout S Fully Assembled and Tested. Maxim Integrated Products 1
19-5059; Rev 1; 4/10 General Description The MAX4951B evaluation kit (EV kit) provides a proven design to evaluate the MAX4951BE dual-channel redriver. The EV kit contains four sections: application circuit,
More informationMaxim Integrated Products 1
19-4581; Rev 0; 4/09 MAX4989 Evaluation Kit General Description The MAX4989 evaluation kit (EV kit) provides a proven design to evaluate the MAX4989 Hi-Speed 2-of-4 USB 2.0 crosspoint switch. The EV kit
More informationMAX17116Q Evaluation Kit Evaluates: MAX17116 in a 24-Pin TQFN Package
19-5846; Rev 0; 5/11 MAX17116Q Evaluation Kit General Description The MAX17116Q evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the MAX17116 dual-output DC/DC power
More informationMAX4899AE Evaluation Kit. Evaluates: MAX4899AE/MAX4899E
19-4025; Rev 0; 1/08 General Description The MAX4899AE evaluation kit (EV kit) provides a proven design to evaluate the MAX4899AE USB 2.0 high-speed, fault-tolerant 4:1 multiplexer. The EV kit routes a
More information+Denotes lead-free and RoHS-compliant.
9-4067; Rev 0; /08 MAX95 Evaluation Kit General Description The MAX95 evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that simplifies the evaluation of the MAX95 400Mbps,
More informationC10, C12, C14 3 C11, C13, C15, C16 C18, C19, C20 3. Maxim Integrated Products 1
9-57; Rev. 0; 7/0 MAX70 Evaluation Kit General Description The MAX70 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that demonstrates the MAX70B power-management IC.
More informationMAX3160E Evaluation Kit. Evaluates: MAX3160E. Features
9-076; Rev 0; 4/07 MAX60E Evaluation Kit General Description The MAX60E evaluation kit (EV kit) circuit demonstrates the RS-/RS-485/RS-4 multiprotocol transceivers using the MAX60E IC. The circuit can
More informationMaxim Integrated Products 1
19-2881; Rev 0; 6/03 General Description The MAX1543 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that provides the voltages and features required for active-matrix,
More information+Denotes lead-free and RoHS-compliant.
19-0993; Rev 0; 9/07 MAX4209 Evaluation Kit General Description The MAX4209 evaluation kit (EV kit) simplifies evaluation of the MAX4208 ultra-low offset/drift, fixed gain, precision instrumentation amplifier
More informationS Low-Power Shutdown Input S Fully Assembled and Tested. Maxim Integrated Products 1
19-5599; Rev 0; 10/10 MAX98303 Evaluation Kit General Description The MAX98303 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX98303 stereo 3.1W Class D amplifier in a
More informationCLK1, CLKIN, CLKOUT, OUTA, OUTB
9-82; Rev 2; 5/ Evaluation Kit General Description The evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary for evaluating the. The is a dual,0-bit,
More informationS One SATA Host Connector S Two SATA Device Connectors
19-5166; Rev 0; 2/10 MAX4986 Evaluation Kit General Description The MAX4986 evaluation kit (EV kit) provides a proven design to evaluate the MAX4986 SAS/SATA 2:1/1:2 multiplexer/demultiplexer. The EV kit
More information+Denotes lead(pb)-free and RoHS compliant. Maxim Integrated Products 1
19-4957; Rev 0; 9/09 General Description The MAX3162 evaluation kit (EV kit) provides a proven design to evaluate the MAX3162 programmable RS-232/ RS-485/422 multiprotocol transceiver. The MAX3162 EV kit
More informationS USB-PC Connection (Cable Not Included) S USB Powered (No External Power Supply Required) S Real-Time Data Acquisition Through the USB
19-5610; Rev 1; 8/11 MAXADClite Evaluation Kit General Description The MAXADClite evaluation kit (EV kit) evaluates the MAX11645, Maxim's smallest, very-low-power, 12-bit, 2-channel analog-to-digital converter
More informationEvaluates: MAX MAX14970 Evaluation Kit. General Description. Quick Start (Application Circuit) Features. Table 1. Default Shunt Positions
General Description The MAX14970 evaluation kit (EV kit) provides a proven design to evaluate the MAX14970 dual-channel buffer. The EV kit contains four sections: an application circuit, characterization
More informationMAX14972 Evaluation Kit Evaluates: MAX14972
19-6165; Rev 0; 12/11 MAX14972 Evaluation Kit General Description The MAX14972 evaluation kit (EV kit) provides a proven design to evaluate the MAX14972 dual SuperSpeed USB 3.0 equalizer/redriver utilizing
More information+Denotes lead-free and RoHS compliant.
19-2446; Rev 1; 6/08 MAX17062 Evaluation Kit General Description The MAX17062 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages required for active-matrix,
More informationMAX6651 Evaluation Kit/Evaluation System
19-1980; Rev 1; 5/07 MAX6651 Evaluation Kit/Evaluation System General Description The MAX6651 evaluation kit (EV kit) is an assembled and tested printed-circuit board (PCB) that demonstrates the MAX6651
More informationS On-Board Clock Generator Capable of 33MHz and 16.5MHz. S Accessible Headers to All 8 Input/Output (I/O) Channels
19-5067; Rev 0; 11/09 MAX13055E Evaluation Kit General Description The MAX13055E evaluation kit (EV kit) provides a proven design to evaluate the MAX13055E 8-channel, bidirectional level translator. The
More information+Denotes lead-free and RoHS compliant.
19-4387; Rev 0; 11/08 MAX9675 Evaluation Kit General Description The MAX9675 evaluation kit (EV kit) provides a proven design to evaluate the MAX9675 nonblocking 16 x 16 video crosspoint switch with buffered
More informationMAX14579E Evaluation Kit Evaluates: MAX14579E/MAX14579AE
19-5995; Rev 0; 8/11 General Description The MAX14579E evaluation kit (EV kit) provides a proven design to evaluate the MAX14579E headset detection IC. The EV kit is designed to demonstrate the IC s headset
More informationINSTALL.EXE. Maxim Integrated Products 1
9-258; Rev 0; 9/02 MAX06 Evaluation Kit General Description The MAX06 evaluation kit (EV kit) is designed to evaluate the MAX06. The MAX06 is an 8-bit four-channel (two-differential-channel) ADC with a
More information+Denotes lead(pb)-free and RoHS compliant. FOUTL-, FOUTL+, FOU TR-, FO U TR+, V D D, P G N D
19-4071; Rev 1; 9/09 MAX9736A Evaluation Kit General Description The MAX9736A evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that configures the MAX9736A Class D amplifier
More informationMaxim Integrated Products 1
9-2479; Rev 0; 6/02 MAX28 Evaluation Kit General Description The MAX28 evaluation kit (EV kit) is designed to evaluate the MAX28. The MAX28 is a 2-bit, 2-channel (six differential-channel) ADC with a 2-wire
More informationEvaluate: MAX14589E/MAX14594E/ MAX MAX14589E/MAX14594E/ MAX14689 Evaluation Kits. Features and Benefits. General Description.
Evaluation Kits General Description The MAX14589E/MAX14594E/ evaluation kits (EV kits) are fully assembled and tested circuit boards that demonstrate the functionality of the MAX14589E, MAX14594E, and
More informationMAX6642 Evaluation System/Evaluation Kit
19-3417; Rev 0; 9/04 MAX6642 Evaluation System/Evaluation Kit General Description The MAX6642 evaluation kit (EV kit) is an assembled and tested PC board with a mounted MAX6642. The EV kit allows full
More informationS 27-Bit Parallel Interface S Rosenberger Connector (Cable Included) S Proven PCB Layout S Fully Assembled and Tested. Maxim Integrated Products 1
19-90; Rev 0; 9/09 MAX97/MAX98 Evaluation Kit General Description The MAX97/MAX98 evaluation kit (EV kit) provides a proven design to evaluate the MAX97 7-bit,.5MHz to MHz DC-balanced LVDS serializer and
More informationMAX2009/MAX2010 Evaluation Kits
19-2972; Rev 0; 9/03 MAX2009/MAX2010 Evaluation Kits General Description The MAX2009/MAX2010 evaluation kits (EV kits) simplify the evaluation of the MAX2009 and MAX2010. These kits are fully assembled
More informationPART. Maxim Integrated Products 1
9-05; Rev 0; 5/0 General Description The MAX6654 evaluation system (EV system) consists of a MAX6654 evaluation kit (EV kit) and a companion system management bus (SMBus ) interface board. The MAX6654
More informationMAX6966 Evaluation Kit/Evaluation System
19-3999; Rev 1; 5/08 MAX6966 Evaluation Kit/Evaluation System General Description The MAX6966 evaluation (EV) kit is an assembled and tested PCB that demonstrates the capabilities of the MAX6966 constant-current
More informationMAX9768 Evaluation Kit/Evaluation System
9-; Rev 0; /07 MAX9768 Evaluation Kit/Evaluation System General Description The MAX9768 evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that demonstrates the capabilities
More informationS IEEE 802.3af/at-Compliant PSE Circuit. Maxim Integrated Products 1
19-5740; Rev 0; 1/11 MAX5971A Evaluation Kit General Description The MAX5971A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet single-port power-sourcing
More information+Denotes lead(pb)-free and RoHS compliant. C76, C77, C83 C86
19-5061; Rev 0; 11/09 MAX11046 Evaluation Kit General Description The MAX11046 evaluation kit (EV kit) provides a proven design to evaluate the MAX11046 8-channel, 16-bit, simultaneous-sampling ADC. The
More informationMAX9729 Evaluation Kit/Evaluation System
19-0958; Rev 0; 8/07 MAX9729 Evaluation Kit/Evaluation System General Description The MAX9729 evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that evaluates the MAX9729
More informationMAX54X Evaluation Kit Evaluates: MAX541/MAX542
19-6340; Rev 0; 5/12 MAX54X Evaluation Kit General Description The MAX54X evaluation kit (EV kit) provides a proven design to evaluate the MAX541/MAX542 serial-input, voltage-output, 16-bit digital-to-analog
More informationMAX6692 Evaluation System/Evaluation Kit
19-2707; Rev 0; 10/02 MAX6692 Evaluation System/Evaluation Kit General Description The MAX6692 evaluation system (EV system) consists of a MAX6692 evaluation kit (EV kit) and a companion Maxim SMBus interface
More informationMAX1707 Evaluation Kit/Evaluation System
19-3904; Rev 0; 12/05 MAX1707 Evaluation Kit/Evaluation System General Description The MAX1707 evaluation system (EV system) includes a MAX1707 evaluation kit (EV kit) and a Maxim command module (CMODUSB).
More informationMAX6960 Evaluation Kit/Evaluation System
9-85; Rev 0; 0/05 Evaluation Kit/Evaluation System General Description The evaluation kit (EV kit) provides a proven design to evaluate the 8 x 8 graphic LED tile display driver. The EV kit board contains
More informationMaxim Integrated Products 1
19-2467; Rev 0; 4/02 MAX1236 Evaluation Kit General Description The MAX1236 evaluation kit (EV kit) is designed to evaluate the MAX1236. The MAX1236 is a 12-bit, four-channel (two differential-channel)
More informationMAX3535E Evaluation Kit. Evaluates: MAX3535E
9-076; Rev 0; /06 MX55E Evaluation Kit General Description The MX55E evaluation kit (EV kit) is a fully assembled and tested PC that contains a 500V RMS isolated RS-485/RS-4 transceiver with ESD protection.
More informationMAX15096/A/D Evaluation Kits. Evaluate: MAX15096/MAX15096A/MAX15096D. General Description. Features. Component List
General Description The MAX15096/A/D evaluation kit (EV kit) provides a proven design to evaluate the MAX15096 hot-swap controller with an integrated 6A MOSFET. The EV kit is configured to pass 6A in a
More informationMaxim Integrated Products 1
9-005; Rev ; /06 General Description The MAX557 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that evaluates the MAX557 digital potentiometer. Included software generates
More informationDS1070K EconOscillator Programming Kit
Rev 0; 5/04 DS070K EconOscillator Programming Kit General Description The DS070K EconOscillator programming kit is a complete hardware/software solution for programming Dallas Semiconductor s 2-wire EconOscillator
More informationMAX6620 Evaluation Kit/Evaluation System
19-4069; Rev 0; 3/08 MAX6620 Evaluation Kit/Evaluation System General Description The MAX6620 evaluation system (MAX6620EVCMAXQU+) consists of the MAX6620 evaluation kit (MAX6620EVKIT+) and the Maxim CMAXQUSB+
More informationEV-110 AAT1157 EVAL 1MHz 1.4A Buck Regulator
Introduction The AAT1157 evaluation board demonstrates performance, along with the suggested size and placement of external components, for the AAT1157 integrated buck regulator. The external components
More informationMAX7311 Evaluation Kit. Evaluates: MAX7311
19-4151; Rev 0; 5/08 General Description The MAX7311 evaluation kit (EV kit) provides a proven design to evaluate the MAX7311 I 2 C-compatible 16-bit I/O port expander, with each port configurable as input
More informationMAX544X Evaluation Kit Evaluates: MAX5441 MAX5444
19-6314; Rev 0; 5/12 MAX544X Evaluation Kit General Description The MAX544X evaluation kit (EV kit) provides a proven design to evaluate the MAX5441 MAX5442 serial-input, voltage-output, 16-bit digital-to-analog
More informationMAX14850PMB1 Peripheral Module
9-633; Rev 0; 5/2 General Description The MAX4850PMB peripheral module utilizes the MAX4850 digital isolator to isolate another SPI- or UARTbased module from any host system that utilizes Pmod K - compatible
More informationMaxim Integrated Products 1
19-1883; Rev 1; 2/07 MAX1799 Evaluation System/ General Description The MAX1799 evaluation system (EV system) consists of a MAX1799 evaluation kit (EV kit) and a companion Maxim CMAXQUSB board. The MAX1799
More information+Denotes lead(pb)-free and RoHS compliant.
19-4545; Rev 0; 4/09 General Description The MAX13235E evaluation kit (EV kit) provides a proven design to evaluate the MAX13235E, a 3Mbps RS-232 transceiver with low-voltage interface and enhanced electrostatic
More information+Denotes lead(pb)-free and RoHS compliant. C35 1 C36 1 D2 1 D3 1 FB1 1 P1 1
19-4306; Rev 0; 10/08 General Description The MAX9132 evaluation kit (EV kit) provides a proven design to evaluate the MAX9132 high-speed multipleport LVDS crossbar switches. The MAX9132 has three input
More informationMAX6653 Evaluation System/Evaluation Kit
9-908; Rev 0; 7/0 MAX665 Evaluation System/Evaluation Kit General Description The MAX665 evaluation system (EV system) consists of a MAX665 evaluation kit (EV kit) and a companion Maxim system management
More informationS U1 Configured for Filterless Output S U2 Configured for Filtered Output S Fully Assembled and Tested. Maxim Integrated Products 1
19-5505; Rev 0; 9/10 MAX98400B Evaluation Kit General Description The MAX98400B evaluation kit (EV kit) configures the MAX98400B Class D amplifier to drive 2x12W into a pair of 8I speakers in stereo mode
More informationMAX1587AEVKIT. Maxim Integrated Products 1
19-3137; Rev 1; 2/07 General Description The MAX1587A evaluation system (EV system) consists of a MAX1587A evaluation kit (EV kit) and a companion Maxim CMAXQUSB board. The MAX1587A evaluation kit (EV
More informationMAX8858 Evaluation Kit. Evaluates: MAX8858
19-4449; Rev 0; 2/09 General Description The MAX8858 evaluation kit (EV kit) is a fully assembled and tested PCB for evaluating the MAX8858 powermanagement IC (PMIC). The MAX8858 PMIC provides a compact
More informationMAX5216PMB1 Peripheral Module
9-6; Rev 0; 5/ MAX56PMB Peripheral Module General Description The MAX56PMB peripheral module provides the necessary hardware to interface the MAX56 6-bit DAC to any system that utilizes PmodK-compatible
More informationGeneral Description. Features. Component List. Component Suppliers
General Description The MAX5911 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that demonstrates the MAX5911 fully integrated hot-swap solution for negative supply
More informationMaxim Integrated Products 1
19-5229; Rev 0; 4/10 MAX14885E Evaluation Kit General Description The MAX14885E evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that utilizes the MAX14885E device to implement
More informationFeatures. General Description. Ordering Information. Component List
General Description The MAX2117 evaluation kit (EV kit) simplifies the testing and evaluation of the device direct-conversion tuner. The evaluation kit is fully assembled and tested at the factory. Standard
More informationMaxim Integrated Products 1
9-99; Rev 0; /06 MAX96 Evaluation Kit General Description The MAX96 evaluation kit (EV kit) is a fully assembled and tested PC board that evaluates the MAX96 - channel, single-ended, -bit, SAR ADC. The
More informationEvaluates: MAX2120. MAX2120 Evaluation Kit. General Description. Features. Ordering Information. Component List
General Description The MAX2120 evaluation kit (EV kit) simplifies the testing and evaluation of the IC direct-conversion tuner. The evaluation kit is fully assembled and tested at the factory. Standard
More informationMAX31723PMB1 Peripheral Module
19-6332; Rev 0; 5/12 MAX31723PMB1 Peripheral Module General Description The MAX31723PMB1 peripheral module provides the necessary hardware to interface the MAX31723 digital thermometer and thermostat to
More informationEvaluates: MAX MAX31865PMB1 Peripheral Module. General Description. Features and Benefits. Peripheral Module Board Photo
General Description The MAX31865PMB1 peripheral module (Pmod ) provides the necessary hardware to interface the MAX31865 RTD-to-digital converter to any system that utilizes Pmodcompatible expansion ports
More informationMAX15090/MAX15090A Evaluation Kits. Evaluate: MAX15090/MAX15090A. Features. General Description. Component List
General Description The MAX5090 evaluation kit (EV kit) provides a proven design to evaluate the MAX5090 hot-swap controller with an integrated 2A MOSFET. The MAX5090 EV kit is configured to pass 2A in
More information+Denotes lead-free and RoHS compliant. JU5, JU6, JU9 JU13 LED1, LED3 LED14
19-4303; Rev 0; 10/08 MAX6956 Evaluation Kit General Description The MAX6956 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that contains a MAX6956 IC. The MAX6956 is a 28-port
More informationMAX17065 Evaluation Kit. Evaluates: MAX17065
19-4310; Rev 0; 10/08 MAX17065 Evaluation Kit General Description The MAX17065 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the high-efficiency MAX17065 organic
More informationMAX14830 Evaluation Kit Evaluates: MAX14830
19-6127; Rev 1; 7/12 MAX14830 Evaluation Kit General Description The MAX14830 evaluation kit (EV kit) provides a proven design to evaluate the MAX14830 quad-channel universal asynchronous receiver-transmitter
More informationMAXQ USB-to-JTAG EV Kit
19-5185; Rev 1; 11/10 MAXQ USB-to-JTAG Evaluation Kit General Description The MAXQM USB-to-JTAG evaluation kit (EV kit) is a preprogrammed interface board that acts as a USB-to-JTAG programming and debugging
More informationMAX44000PMB1 Peripheral Module
19-6335; Rev 0; 5/12 MAX44000PMB1 Peripheral Module General Description The MAX44000PMB1 peripheral module provides the necessary hardware to interface the MAX44000 ambient and infrared proximity sensor
More informationMAX14521E Evaluation Kit. Evaluates: MAX14521E
19-4422 Rev 0; 1/09 General Description The MAX14521E evaluation kit (EV kit) provides a proven design to evaluate the MAX14521E quad, highvoltage EL lamp drivers. The EV kit also includes Windows 2000/XP-
More information+Denotes lead(pb)-free and RoHS compliant. R1, R2, R3, R103
19-4544; Rev 0; 4/09 MAX6662 Evaluation Kit General Description The MAX6662 evaluation kit (EV kit) provides a proven design to evaluate the MAX6662 12-bit + sign temperature sensor with SPI -compatible
More informationS +10.8V to +13.2V Supply Voltage S Output Voltages
19-5088; Rev 0; 12/09 General Description The MAX17113 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages and features required for thin-film transistor
More informationMAX13335E Evaluation Kit Evaluates: MAX13335E/MAX13336E
19-6290; Rev 0; 4/12 General Description The MAX13335E evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX13335E automotive audio receiver. The IC features a dual automotive
More information*Note: Operation beyond this range is possible, but has not been characterized. PART. Maxim Integrated Products 1
19-8; Rev ; 2/ EVALUATION KIT AVAILABLE 8MHz to MHz Variable-Gain General Description The MAX6 general-purpose, high-performance variable-gain amplifier (VGA) is designed to operate in the 8MHz to MHz
More informationMAX16128/MAX16129 Evaluation Kits. Evaluate: MAX16128/MAX General Description. Features. Component List
General Description The MAX16128/MAX16129 evaluation kits (EV kits) demonstrate high overvoltage protection of the MAX16128/ MAX16129 for automotive applications that must survive load-dump and high-voltage
More informationMAX3232PMB1 Peripheral Module
19-6319; Rev 0; 5/12 MAX3232PMB1 Peripheral Module General Description The MAX3232PMB1 peripheral module provides the necessary hardware to interface the MAX3232E true RS-232 transceiver to any system
More information+Denotes lead-free/rohs-compliant. J5 1 J10 J13 4 J17 1 L1 1 L2 1 L4 L7 4
19-4156; Rev 0; 5/08 E V A L U A T I O N K I T A V A I L A B L E General Description The MAX3674 evaluation kit (EV kit) is a fully assembled and tested demonstration board that simplifies evaluation of
More informationMAX17105 Evaluation Kit/Evaluation System
19-4589; Rev 0; 4/09 MAX17105 Evaluation Kit/Evaluation System General Description The MAX17105 evaluation system (EV system) consists of the MAX17105 evaluation kit (EV kit) and the Maxim CMAXQUSB+ command
More informationEVALUATION KIT AVAILABLE High-Bandwidth, VGA 2:1 Switch with ±15kV ESD Protection
19-5; Rev ; 1/9 EVALUATION KIT AVAILABLE High-Bandwidth, VGA :1 Switch General Description The integrates high-bandwidth analog switches, level-translating buffers, and level-translating FET switches to
More information