SFP/XFP/SFP+ Transceivers

Transcription

1 Product page > Data Sheet SFP/XFP/SFP+ Transceivers Fiber optic or electrical transceiver units, providing pluggable interfaces according to known standards and specifications MSA (Multi-Source Agreement) compliance SFP (Small Form-factor Pluggable) transceivers (SFPs) are hot-swappable input/output optical and electrical transceiver units, each providing a different interface according to known compliance standards and pre-determined specifications. The units are plugged into other products to provide the required interface, thus enabling optimal combination of Capex reduction, ease of network planning and stock flexibility. RAD's SFP transceivers are fully compliant with the Multisource Agreement (MSA) specifications, and are fully interoperable with third-party standards-based devices. On account of their small size, SFPs allow higher port densities than with other transceivers, resulting in more efficient host device design. The intuitive squeeze-and-pull mechanism makes it easy to install SFP transceivers and remove them. Rather than replacing an entire circuit board containing several soldered-in modules, individual SFPs are unplugged and replaced for repair or upgrade, with cost savings both in maintenance and in upgrading efforts. Built-in digital diagnostic monitoring (DDM) functionality is available for designated SFP types, allowing users to monitor the unit's transmitter optical output power, receiver input optical power, internal temperature, supply voltage and transmitter bias current levels in real-time. The XFP (10 Gigabit Small Form-factor Pluggable) and SFP+ (Enhanced Small Form-factor Pluggable) are transceivers designed for 10G network applications. XFP/SFP+ modules are hot-swappable providing different interfaces according to known compliance standards and predetermined specifications. RAD's XFP/SFP+ transceivers are fully compliant with the Multisource Agreement (MSA) specifications, and are fully interoperable with third-party standards-based devices. The intuitive squeeze-and-pull mechanism makes it easy to install XFP/SFP+ transceivers and remove them. Rather than replacing an entire circuit board containing several soldered-in modules, individual XFPs/SFP+s are unplugged and replaced for repair or upgrade, with cost savings both in maintenance and in upgrading efforts. XFP/SFP+ support built-in digital diagnostic monitoring (DDM) functionality allowing users to monitor the unit's transmitter optical output power, receiver input optical power, internal temperature, supply voltage and transmitter bias current levels in real-time.

2 Specifications FIBER OPTIC INTERFACES Notes: Commercial SFP/XFP/SFP+ Transceivers are designed to withstand temperatures between 0 70 C ( F). Some of RAD s SFP/XFP/SFP+ Transceivers are available with extended temperature range between C ( F) or in industrially hardened versions, designed to withstand temperatures between C ( F). The specified typical range may vary according to the specific product in which the SFP/XFP/SFP+ is used. For more information, refer to the data sheet of the specific product. Table 1. Fiber Optic Fast Ethernet/STM-1/STM-4 SFPs SFP-1, SFP-1D* Standards Transmitter 1310, 62.5/ BaseFX, (FE) LED ANSI T (STM-1) SFP-2, SFP-2D*, 100BaseLX10, SFP-2DH*, SFP-2H* (FE), G.957 S1.1 (STM-1) SFP-3, SFP-3D*, SFP-3H* SFP-4, SFP-4D* G.957 L1.1 (STM-1) G.957 L1.2 (STM-1) SFP-10A, SFP-10AD*, Tx 1310/Rx 1550, 100BaseBX10, SFP-10ADH* 9/125 (FE) G.957 (STM-1) SFP-10B, SFP-10BD*, Tx 1550/Rx 1310, 100BaseBX10, SFP-10BDH* 9/125 (FE) G.957 (STM-1) SFP-14D* STM-4, LC, DDM, internal calibration SFP-15, SFP-15DH* STM-4, LC 1310, 62.5/ G.957 S * Legend: D internal DDM calibration; H industrially hardened SFP C ( F); ED external DDM calibration 2

3 Data Sheet Table 1. Fiber Optic Fast Ethernet/STM-1/STM-4 SFPs (cont.) SFP-16 STM-4, LC Standards Transmitter G.957 L SFP-18A, SFP-18AED* Tx 1310/Rx 1550, /125 SFP-18B, SFP-18BED* Tx 1550/Rx 1310, /125 SFP-24 SFP-75D STM-4, LC 850, 50/ , 62.5/125 VCSEL VCSEL * Legend: D internal DDM calibration; H industrially hardened SFP C ( F); ED external DDM calibration 3

4 Table 2. Fiber Optic Gigabit Ethernet SFPs SFP-5, SFP-5D*, SFP-5DH*, SFP-5H* Standards Transmitter Output Power 850, 50/ BaseSX, VCSEL (GbE) SFP-6, SFP-6D*, SFP-6DH*, SFP-6H* 1000BaseLX10, (GbE) SFP-7, SFP-7D*, SFP-7DH* SFP-8, SFP-8D*, SFP-8DH*, SFP-8H* SFP-17A, SFP-17AD*, SFP-17AH* Tx 1310/Rx 1490, 1000BaseBX10, /125 (GbE) SFP-17B, SFP-17BD*, SFP-17BH* Tx 1490/Rx 1310, 1000BaseBX10, /125 (GbE) SFP-20, SFP-20EDH* SFP-21A, SFP-21AED*, SFP-21AH* Tx 1310/Rx 1490, /125 SFP-21B, SFP-21BED*, SFP-21BH* Tx 1490/Rx 1310, /125 SFP-22A, SFP-22AH* Tx 1490/Rx 1570, 9/125 SFP-22B, SFP-22BH* Tx 1570/Rx 1490, 9/125 SFP-23A, SFP-23AED* Tx 1310/Rx 1550, /125 SFP-23B, SFP-23BED* Tx 1550/Rx 1310, /125 SFP-28A, SFP-28AD* Tx 1310/Rx /125 SFP-28B, SFP-28BD* Tx 1550/Rx 1310, /125 * Legend: D internal DDM calibration; H industrially hardened SFP C ( F); ED external DDM calibration 4

5 Data Sheet Table 2. Fiber Optic Gigabit Ethernet SFPs (cont.) SFP-27D*, SFP-27DH* SFP-29D*, SFP-29DH* SFP-31D*, SFP-31DH* SFP-33D*, SFP-33DH* SFP-35D*, SFP-35DH* SFP-37D*, SFP-37DH* SFP-39D*, SFP-39DH* SFP-41D*, SFP-41DH* SFP-43D*, SFP-43DH* SFP-45D*, SFP-45DH* SFP-47D*, SFP-47DH* SFP-49D*, SFP-49DH* SFP-51D*, SFP-51DH* SFP-53D*, SFP-53DH* SFP-55D*, SFP-55DH* SFP-57D*, SFP-57DH* SFP-59D*, SFP-59DH* SFP-61D*, SFP-61DH* Standards Transmitter 1270, 9/125 (CWDM) , 9/125 (CWDM) (CWDM) , 9/125 (CWDM) , 9/125 (CWDM) , 9/125 (CWDM) , 9/125 (CWDM) , 9/125 (CWDM) , 9/125 G.694.2, CWDM (CWDM) , 9/125 (CWDM) , 9/125 (CWDM) 1490, 9/125 (CWDM) 1510, 9/125 (CWDM) 1530, 9/125 (CWDM) (CWDM) 1570, 9/125 (CWDM) 1590, 9/125 (CWDM) 1610, 9/125 (CWDM) * Legend: D internal DDM calibration; H extended temperature range C ( F) 5

6 Table 2. Fiber Optic Gigabit Ethernet SFPs (cont.) SFP-70DH-27* Standards Transmitter 1270, 9/125 G.694.2, CWDM SFP-70DH-29* SFP-70DH-31* SFP-70DH-33* SFP-70DH-35* SFP-70DH-37* SFP-70DH-39* SFP-70DH-41* SFP-70DH-43* SFP-70DH-45* SFP-70DH-47* SFP-70DH-49* SFP-70DH-51* SFP-70DH-53* SFP-70DH-55* SFP-70DH-57* SFP-70DH-59* SFP-70DH-61* 1290, 9/125 G.694.2, CWDM G.694.2, CWDM 1330, 9/125 G.694.2, CWDM 1350, 9/125 G.694.2, CWDM 1370, 9/125 G.694.2, CWDM 1390, 9/125 G.694.2, CWDM 1410, 9/125 G.694.2, CWDM 1430, 9/125 G.694.2, CWDM 1450, 9/125 G.694.2, CWDM 1470, 9/125 G.694.2, CWDM 1490, 9/125 G.694.2, CWDM 1510, 9/125 G.694.2, CWDM 1530, 9/125 G.694.2, CWDM G.694.2, CWDM 1570, 9/125 G.694.2, CWDM 1590, 9/125 G.694.2, CWDM 1610, 9/125 G.694.2, CWDM SFP-GPON-1DH* Gigabit Ethernet, GPON ONT Class B+, SC, industrially hardened Tx 1310/Rx /125 (Tx: Mb/s Rx: Mb/s) G * Legend: D internal DDM calibration; H industrially hardened SFP C ( F)

7 Data Sheet Table 2. Copper STM-1/Fast Ethernet/Gigabit Ethernet/10 Gigabit Ethernet SFP/XFP SFP-9G, SFP-9-GH* Gigabit Ethernet, RJ-45, SerDes interface Standards Cable Impedance (Attenuation) [Ω] [m] [ft] 1000BaseT, UTP, CAT SFP-11 STM-1E, mini BNC, DIN 1.0/2.3 SFP-11PP STM-1E, Push-Pull mini BNC, DIN 1.0/2.3 SFP-30, SFP-30H* Gigabit Ethernet, RJ-45, SGMII Interface XFP Gigabit Ethernet, Copper, 3 meter length DAC (Direct attached copper) G.703, supports CMI encoder/decoder G.703, supports CMI encoder/decoder 10/100/1000BaseT, Coaxial (12.7 db)** Coaxial (12.7 db)** UTP, cat Twinax AWG SFP-26D* multirate 100 Mbps 2.67 Gbps, Gigabit Ethernet/Fiber Channel/ Fast Ethernet/STM-16/STM-4/ STM-1, LC SFP-74ED-17 to SFP-74ED-61* multirate 155Mbps 2.67 Gbps Gigabit Ethernet/Fiber Channel/ STM-16/ STM-4/ STM-1, LC Table 4. Fiber Optic Multirate SFPs Standards Transmitter C-Band, Channels 17 to 61, 9/ (2.67 Gbps/ OC-48/FE) ITU Grid, 100 Ghz spacing, C-Band Channels [DWDM] -21 (2 x FC/GbE/1x FC, STM-4/STM-1) Notes: * Legend: D internal DDM calibration; H industrially hardened SFP C ( F); ED external DDM calibration ** With SFP-11/SFP-11PP, a 135m range is attainable when using RG59 B/U (at 78 MHz, in accordance with the square root of frequency law). 7

8 Table 5. Fiber Optic 10 Gigabit Ethernet XFPs XFP-1D*, XFP-1DH* 10 XFP-2D*, XFP-2DH* 10 XFP-3D*, XFP-3DH* 10 XFP-4D* 10 Standards Transmitter 850, 50/125 10GBASE-LR/LW 10GBASE-ZR/ZW 10GBASE-ER/EW 10GBASE-SR/SW VCSEL XFP-5D-17 to XFP-5D-61* C-Band, Channels 17 to 10GBase-ER/EW [DWDM] , 9/125 ITU grid, 100 Ghz spacing, C-Band channels XFP-7D-17 to XFP-7D-61* C-Band, Channels 17 to 10GBase-ZR/ZW [DWDM] , 9/125 ITU grid, 100 Ghz spacing, C-Band channels Table 6. Fiber Optic 10 Gigabit Ethernet SFP+ SFP-P-1DH* 10 Standards Transmitter 1310nm, 9/125 single 10GBase-LR/LW mode SFP-P-2DH* nm, 9/125 single mode 10GBase-ZR/ZW SFP-P-3DH* 1550nm, 9/125 single 10GBase-ER/EW mode SFP-P-4DH* 850nm, 50/125 10GBase-SR/SW VCSEL SFP-P-5ADH* 10 Tx 1330 Rx /125 10GBase-LR/LW SFP-P-5BDH* 10 Tx 1270/ Rx /125 10GBase-LR/LW * Legend: D internal DDM calibration; H industrially hardened SFP C ( F)

9 Data Sheet Ordering To order an SFP/XFP/SFP+ unit, use its ordering name as listed in Tables 1 6. Note: It is strongly recommended to order RAD products with original RAD SFPs/XFPs/SFP+s installed. This will ensure that prior to shipping; RAD has performed comprehensive functional quality tests on the entire assembled unit, including the SFP/XFP/SFP+ devices. RAD cannot guarantee full compliance to product specifications for products using non-rad SFPs/XFPs/SFP+s. SUPPLIED ACCESSORIES CBL-MINIBNC-BNC Two adapter cables for converting mini BNC connectors to regular BNC coaxial connectors (for SFP-11) CBL-MINIBNC/PP-BNC Two adapter cables for converting mini BNC Push-Pull connectors to regular BNC coaxial connectors (for SFP-11/PP) /17 () Specifications are subject to change without prior notice RAD Data Communications Ltd. RAD products/technologies are protected by registered patents. To review specifically which product is covered by which patent, please see ipr.rad.com. The RAD name, logo, logotype, and the product names MiNID, Optimux, Airmux, IPmux, and MiCLK are registered trademarks of RAD Data Communications Ltd. All other trademarks are the property of their respective holders. International Headquarters 24 Raoul Wallenberg Street Tel Aviv 69719, Israel Tel Fax , market@rad.com North American Headquarters 900 Corporate Drive Mahwah, NJ 07430, USA Tel Toll free Fax market@radusa.com Order this publication by Catalog No