Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
|
|
- Job Watkins
- 5 years ago
- Views:
Transcription
1 echnical data sheet LR24A-MOD Communicative rotary actuator for ball valves orque motor 5 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion of sensor signals Communication via BACnet MS/P, Modbus RU, Belimo-MP-Bus or conventional control echnical data Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency 50/60 Hz Nominal voltage range AC V / DC V Power consumption in operation 2.5 W Power consumption in rest position 1.3 W Power consumption for wire sizing 5 VA Connection supply / control Cable 1 m, 6 x 0.75 mm² Functional data Nominal torque Min. 5 Nm Communicative control BACnet MS/P Modbus RU (ex works) MP-Bus Operating range Y DC V Operating range Y variable DC V Position feedback U DC V Position feedback U note Max. 1 ma Position feedback U variable Start point DC V End point DC V Position accuracy ±5% Manual override with push-button, can be locked Running time motor 90 s / 90 Running time motor variable s Adaption setting range manual (automatic on first power-up) Adaption setting range variable No action Adaption when switched on Adaption after pushing the gear disengagement button Override control, controllable via bus communication MAX (maximum position) = 100% MIN (minimum position) = 0% ZS (intermediate position) = 50% Override control variable MAX = (MIN 33%)...100% MIN = 0%...(MAX 33%) ZS = MIN...MAX Sound power level Motor 45 db(a) Position indication Mechanically, pluggable Safety Protection class IEC/EN III Safety Extra-Low Voltage (SELV) Protection class UL UL Class 2 Supply Degree of protection IEC/EN IP54 Degree of protection NEMA/UL NEMA 2, UL Enclosure ype 2 EMC CE according to 2014/30/EU Certification IEC/EN IEC/EN and IEC/EN Certification UL culus according to UL A, UL and CAN/CSA E :02 Mode of operation ype 1 Rated impulse voltage supply / control 0.8 kv Control pollution degree 3 Ambient temperature C Non-operating temperature C Ambient humidity Max. 95% r.h., non-condensing LR24A-MOD en-gb subject to changes 1
2 echnical data Safety Maintenance Maintenance-free Weight Weight 0.63 kg Safety notes! his device has been designed for use in stationary heating, ventilation and air conditioning systems and must not be used outside the specified field of application, especially in aircraft or in any other airborne means of transport. Outdoor application: only possible in case that no (sea)water, snow, ice, insolation or aggressive gases interfere directly with the actuator and that is ensured that the ambient conditions remain at any time within the thresholds according to the data sheet. Only authorised specialists may carry out installation. All applicable legal or institutional installation regulations must be complied during installation. he switch for changing the direction of rotation may only be operated by authorised specialists. he direction of rotation must not in particular be reversed in a frost protection circuit. he device may only be opened at the manufacturer s site. It does not contain any parts that can be replaced or repaired by the user. Cables must not be removed from the device. he device contains electrical and electronic components and must not be disposed of as household refuse. All locally valid regulations and requirements must be observed. Product features Mode of operation Converter for sensors Parameterisable actuators Combination analogue - (hybrid mode) Simple direct mounting Manual override Adjustable angle of rotation High functional reliability Home position he actuator is fitted with an integrated interface for BACnet MS/P, Modbus RU and MP-Bus. It receives the digital positioning signal from the control system and returns the current status. Connection option for a sensor (passive, active or with switching contact). In this way, the analogue sensor signal can be easily digitised and transferred to the bus systems BACnet, Modbus or MP-Bus. he factory settings cover the most common applications. Single parameters can be modified with the Belimo Service ools MF-P or ZH EU. he communication parameters of the bus systems (address, baud rate etc.) are set with the ZH EU. Pressing the Address button on the actuator while connecting the supply voltage, resets the communication parameters to the factory setting. Quick addressing: he BACnet and Modbus address can alternatively be set using the buttons on the actuator and selecting 1 to 16. he value selected is added to the «Basic address» parameter and results in the effective BACnet and Modbus address. With conventional control by means of an analogue positioning signal, BACnet or Modbus can be used for the position feedback Straightforward direct mounting on the ball valve with only one central screw. he assembly tool is integrated in the plug-in position indication. he mounting orientation in relation to the ball valve can be selected in 90 steps. Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked). Adjustable angle of rotation with mechanical end stops. he actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached. he first time the supply voltage is switched on, i.e. at the time of commissioning, the actuator carries out an adaption, which is when the operating range and position feedback adjust themselves to the mechanical setting range. he actuator then moves into the position defined by the positioning signal. Factory setting: Y2 (counter-clockwise rotation). 2 LR24A-MOD en-gb subject to changes
3 Product features Adaption and synchronisation An adaption can be triggered manually by pressing the Adaption button or with the PC-ool. Both mechanical end stops are detected during the adaption (entire setting range). Automatic synchronisation after pressing the gearbox disengagement button is configured. he synchronisation is in the home position (0%). he actuator then moves into the position defined by the positioning signal. A range of settings can be adapted using the PC-ool (see MF-P documentation) Accessories Description Electrical accessories Connecting cable 5 m, AB: RJ12 6/6, o ZH EU ZK1-GEN Connection cable 5 m, A: RJ11 6/4, B: Free wire end, o ZH EU ZK2-GEN Description Service ools Service tool for parametrisable and Belimo actuators / VAV controller and HVAC performance devices Belimo PC-ool, software for adjustments and diagnostics Adapter to Service ool ZH ype ype ZH EU MF-P MF-C Electrical installation! Wiring diagrams BACnet MS/P / Modbus RU Notes Connection via safety isolating transformer. he wiring of the line for BACnet MS/P / Modbus RU is to be carried out in accordance with applicable RS485 regulations. Modbus / BACnet: Supply and communication are not galvanically isolated. Connect earth signal of the devices with one another. GND D AC/DC 24 V D AC/DC 24 V D Cable colours: 1= black 2 = red 3 = white 5 = orange 6 = pink 7 = grey Signal assignement Modbus: C1 = D = A C2 = = B Connection with passive sensor, e.g. Pt1000, Ni1000, NC D Ni C Ω 2) MF D P C Ω 2) NC C 1) 200 Ω...60 kω 2) 1) depending on type 2) Resolution 1 Ohm LR24A-MOD en-gb subject to changes 3
4 Electrical installation Connection with active sensor, e.g C MF D - Possible voltage range: V (resolution 30 mv) Connection with switching contact, e.g. Δp monitor p MF D - Requirements for switching contact: he switching contact must be able to accurately switch a current of V. Modbus RU / BACnet MS/P with analog setpoint (hybrid mode) GND Y U DC (0)2 10 V DC 2 10 V AC/DC 24 V Operation on the MP-Bus Y U Sensor MP MF 4 LR24A-MOD en-gb subject to changes
5 Operating controls and indicators 4 Y1 1 Y2 Adaption 2 Power Address 3 Status 5 1 Direction of rotation switch Switch over: Direction of rotation changes 2 Push-button and LED display green Off: No power supply or malfuntion On: In operation Flashing: In address mode: Pulses according to set address (1...16) When starting: Reset to factory setting (Communication) Press button: In standard mode: riggers angle of rotation adaptation In address mode: Confi rmation of set address (1...16) 3 Push-button and LED display yellow Off: On: Flickering: Press button: Standard mode Adaptation or synchronising process active or actuator in address mode (LED display green fl ashing) BACnet / Modbus communication active In operation (>3 s): Switch address mode on and off In address mode: Address setting by pressing several times When starting (>5 s): Reset to factory setting (Communication) 4 Gear disengagement button Press button: Gear disengages, motor stops, manual override possible Release button: Gear engages, synchronisation starts, followed by standard mode 5 Service plug For connecting parameterisation and service tools Check power supply connection 2 Off and 3 On Possiple wiring error in power supply Service Quick adressing Service ools connection 1. Press the Address button until the green Power LED is no longer illuminated. LED flashes in accordance with the previously set address. 2. Set the address by pressing the Address button the corresponding number of times (1-16). 3. he green LED flashes in accordance with address that has been entered (1-16). If the address is not correct, then this can be reset in accordance with Step Confirm the address setting by pressing the green Adaption button. If no confirmation occurs for 60 seconds, then the address procedure is ended. Any address change that has already been started will be discarded. he resulting BACnet MS/P and Modbus RU address is made up of the set basic address plus the short address (e.g. 1007=107). he actuator can be parameterised by ZH EU via the service socket. For an extended parameterisation the PC tool can be connected. AC 24 V DC 24 V MP USB ZH EU i esc OK BELIMO PC-ool MF D USB LR24A-MOD en-gb subject to changes 5
6 Dimensions [mm] Dimensional drawings R Further documentation ool connections Description Protocol Implementation Conformance Statement PICS Description Modbus register Overview MP Cooperation Partners MP Glossary Introduction to MP-Bus echnology Overview Valve-actuator combinations Data sheets for ball valves Installation instructions for actuators and/or ball valves General notes for project planning 6 LR24A-MOD en-gb subject to changes
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet GM24A-MOD Communicative damper actuator for adjusting dampers in technical building installations orque motor 40 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NM24A-MOD Communicative damper actuator for adjusting dampers in technical building installations orque motor 10 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet SF24A-MOD Communicative spring-return actuator with emergency control function for adjusting dampers in technical building installations orque motor 20 Nm Nominal voltage AC/DC 24 V
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NR24A-MOD Communicative rotary actuator for ball valves Nominal torque 10 Nm Nominal voltage AC/DC 24 V Conversion of sensor signals Communication via Modbus RU (RS-485) echnical data
More informationSRQ24A. Technical data. Safety notes. Rotary actuator for ball valves Torque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s
SRQ24A Rotary actuator for ball valves orque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s echnical data Electrical data Nominal voltage AC 24V, 50/60Hz / DC 24V Nominal voltage range
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LM24A- Communicative damper actuator for adjusting dampers in technical building installations Air damper size up to approx. m² Nominal torque 5 Nm Nominal voltage AC/DC 24 V Control
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency. Draft
echnical data sheet LH24A-MF2-P Parmeterisable linear actuator for adjusting dampers and slide valves in technical building installations Air damper size up to approx. m² Actuating force 5 N Nominal voltage
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LM24A-MOD Communicative damper actuator for adjusting dampers in technical building installations Air damper size up to approx. 1 m² Nominal torque 5 Nm Nominal voltage AC/DC 24 V Conversion
More informationLM24A-MOD. Cable 1 m, 6 x 0.75 mm 2 RJ12 socket
echnical data sheet Damper actuator for Modbus for adjusting air dampers in ventilation and air conditioning systems in buildings orque 5 Nm Nominal voltage AC/DC 4V Communication via Modbus RU (RS-485)
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet Communicative damper actuator for adjusting dampers in technical building installations Air damper size up to approx. 1 m² Nominal torque 5 Nm Nominal voltage AC/DC 24 V Control Modulating
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet GK24A-MF Parameterisable SuperCap rotary actuator with emergency control function and extended functionalities for adjusting dampers in technical building installations and in laboratories
More information9.5 nominal torque 4.5 W 16 VA. Min. 30 nominal voltage Min. 30 Nm. Reversible with switch By mounting. MIN (minimum position)
echnical data sheet EF24A- Communicative spring return actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx.
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NKA-DKC L Modulating SuperCap rotary actuator with emergency control function and extended functionalities for adjusting dampers in technical building installations and in laboratories
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LH24A-00-P Communicative linear actuator adjusting dampers and slide valves in technical building installations Air damper size up to approx. m² Actuating force 50 N Nominal voltage
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet SF24A-MOD Communicative spring-return actuator with emergency control function for adjusting dampers in technical building installations Air damper size up to approx. 4 m² Nominal torque
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
Technical data sheet NKQ24A- SuperCap rotary actuator with emergency control function and extended functionalities for adjusting dampers in technical building installations and in laboratories Air damper
More informationTechnical data sheet. Technical data
echnical data sheet LMQ4A Damper actuator for adjusting air control dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx 8 m orque 4 Nm Nominal
More informationFunctional data Factory settings Variable Setting Torque Inhibiting torque
echnical data sheet GK4A-MF Parameterisable SuperCap rotary actuator with emergency setting function and extended functionalities for adjusting air dampers in ventilation and air-conditioning systems for
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet MQ24A-SR Modulating damper actuator for adjusting dampers in technical building installations Air damper size up to approx. 0.8 m² Nominal torque 4 Nm Nominal voltage AC/DC 24 V Control
More informations Spring return C / max C
echnical data sheet SF4A actuator for WORKS with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx. 4 m orque 0 Nm Nominal
More informationOverview of types. Technical data
echnical data sheet SH2A-MF.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NVK4A-SR-PC Modulating globe valve actuator for -way and 3-way globe valves Actuating force 000 N Nominal voltage AC/DC 4 V Control: modulating DC (0) V...0 V Nominal stroke 0 mm Design
More informationPower consumption In operation At rest For wire sizing
echnical data sheet Modulating damper actuator for adjusting air control dampers in ventilation and airconditioning systems for building services installations For air dampers up to approx 08 m orque Nm
More informationPower consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
echnical data sheet GK4A- Damper actuator with capacitor technology for adjusting air dampers with emergency control function and extended functionalities in ventilation and airconditioning systems for
More informationPower consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
echnical data sheet GK24A-SR Modulating SuperCap rotary actuator with emergency setting function and extended functionalities for adjusting air dampers in ventilation and air-conditioning systems for building
More informationTechnical data sheets
echnical data sheets Ready-to-connect spring return actuator with emergency function for VAV and CAV units in ventilation and air conditioning systems in buildings For air dampers up to approx. 4 m 2 orque
More informationSee «Overview of types» 90 s / 60 mm 150 s / 100 mm Manuelle Auslösung der Adaption durch Drücken der Taste «Adaption» oder mit dem PC-Tool
echnical data sheet LHA-MF..-P Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control
More informationTechnical data. PRCA-BAC-S2-T en-gb subject to changes 1
Technical data sheet PRCA-BAC-S2-T Rotary actuator for butterfly valves Torque motor 160 m ominal voltage AC 24...240 V / DC 24...125 V modulating,, hybrid mode with 2 integrated auxiliary switches Conversion
More informationProducts no longer available
echnical data sheet NVF4-MF(-E)-R Modulating linear actuator with emergency function for -way and 3-way globe valves Actuating force 800 N Nominal voltage AC/DC 4 V Modulating control DC 0... 10 V Position
More informationBrief description. Type overview
echnical data sheet VAV-Compact D3 VAV-Compact controller with integrated pressure sensor, VAV controller and damper actuator for pressure-independent VAV and CAV applications in the comfort zone Control:
More informationProducts no longer available
echnical data sheet NV4-MF(-) Modulating linear actuator for -way and 3-way globe valves Actuating force 1000 N Nominal voltage AC/DC 4 V Modulating control DC 0... 10 V Position osition feedback feedbac
More informationBrief description. Type overview
echnical data sheet VAV-Compact D3 VAV-Compact controller with integrated pressure sensor, VAV controller and damper actuator for pressure-independent VAV and CAV applications in the comfort zone Control:
More informationAV24-MFT AV24-MFT2 AV24-MFT2-C105. Power consumption In operation For wire sizing N 1700 N Control Control signal Y Operating range
echnical data sheet AV4-MF()(-C105) Multi-functional linear actuators for -way and 3-way globe valves Actuating force 500 N Nominal voltage AC/DC 4 V Control: modulating DC 0 10 V Position feedback DC
More informationFunctional data Communicative control Cloud: (call for clientapi ) Angle of rotation 90
Cloud capable and communicating valve actuator for adjusting flow in commercial HVAC applications. Non-Failsafe Power Supply AC/DC 24 V Used for CCV and LGCCV assemblies Ethernet 10/100 Mbit/s, TCP/IP,
More informationElectrical data Nominal voltage AC V / DC V Nominal voltage frequency
Technical data sheet PRKCA-BAC-S2-T Rotary actuator for butterfly valves Torque motor 160 m ominal voltage AC 24...240 V / DC 24...125 V modulating,, hybrid mode with 2 integrated auxiliary switches Conversion
More informationFunctional data Position indication reflective visual indicator (snap on) Communicative control Cloud: (call for clientapi )
Technical data sheet AKRB24 IP Cloud capable and communicating valve actuator for adjusting flow in commercial HVAC applications. Failsafe Power Supply AC/DC 24 V Used for CCV and LGCCV assemblies. Ethernet
More informationTechnical data. Safety notes. Product features
Technical data sheet BKN230-MOD 11-00002.F Communication and power supply unit for motorised fire dampers Communication via RTU (RS-48) AC 230 V supply via Euro plug Power is supplied to the actuators
More informationFunctional data Nominal torque min. 180 in lb [20 NM] Communicative control Cloud: (call for clientapi )
Cloud capable and communicating failsafe damper actuator for adjusting dampers in commercial HVAC applications. Failsafe Air Damper Size Up to approx. 45 sq. ft. Nominal Torque 180 in lb [20 NM] Power
More informationBrief description. Service tool ZTH, PC-Tool service socket: locally pluggable or via PP connection.
Product information VAV-Compact MOD A pressure sensor, digital VAV controller and damper actuator all in one, providing a compact solution with a communications capability for pressure-independent VAV
More informationVAV system solution for non-pressure dependent applications in enclosed spaces
System information VAV-Universal VAV system solution for non-pressure dependent applications in enclosed spaces able of contents echnical data sheet Brief description 3 echnical data 4 Safety notes 5 Dimensions
More informationFunctional data Communicative control Cloud: (call for clientapi ) Angle of rotation 90
Cloud capable and communicating failsafe valve actuator for adjusting flow in commercial HVAC applications. Failsafe Power Supply AC/DC 24 V Used for CCV and LGCCV assemblies. Ethernet 10/100 Mbit/s, TCP/IP,
More informationOutput Signal Active Note DC V. Electrical Data Power Supply DC V, ±10%, 1.4 W
Differential Pressure Sensor (Air) Differential pressure transmitter with 8 selectable ranges 0 to 5/10 V, 4 to 20 ma outputs and Modbus functionality. NEMA 4X / IP65 rated enclosure. For monitoring the
More informationTechnical data sheet
ZoneEase VAV Cloud VAV Controller set with Room Unit of Choice and Integrated pressure sensor, controller and damper actuator for pressure-independent temperature control VAV, Simple VAV and Demand Control
More informationBelimo Gateway MP to Modbus RTU - UK24MOD
Product information UK24MOD MODBUS RTU Belimo Gateway MP to Modbus RTU - UK24MOD Contents Complete overview 2 Technical data 3 Safety notes 4 Product features 4 Installation and commissioning 4 Electrical
More informationOutput Signal. 22DTM-16 BACnet DC V, DC V. Electrical data Power Supply DC V, ±10%, 0.3 W
Duct Sensor CO₂ / Humidity / Temperature Duct air quality sensor for combined detection of CO₂, relative humidity and temperature. Designed for control and monitoring applications. Type Overview Type Output
More informationNKQB24-1, NKQX24-1 On/Off, Electronic Fail-Safe, Direct Coupled, 24V
NKQB24-1, NKQX24-1 On/Off, Electronic Fail-Safe, Direct Coupled, 24V orque min. 54 in-lb for control damper surfaces up to 12 sq ft. Application For on/off, fail-safe control of dampers in HVAC systems.
More informationNKQB24-1, NKQX24-1 On/Off, Fail-Safe, Operation, Direct Coupled, 24V
NKQB24-1, NKQX24-1 On/Off, Fail-Safe, Operation, Direct Coupled, 24V orque min. 54 in-lb for control damper surfaces up to 12 sq ft. Application For proportional modulation of dampers in HVAC systems.
More informationOutput signal. 22DTM-16 BACnet DC V, DC V. Electrical data Power supply DC V, ±10%, 0.3 W
Duct Sensor CO₂ / Humidity / Temperature For combined measurement of CO₂, relative humidity and temperature in the duct. Dual channel CO₂ technology. The measured values are output via BACnet. NEMA 4X
More informationOutput Signal. Temperature 22DTH-56M BACnet DC V, DC V. Electrical Data Power Supply DC V, ±10%, 0.7 W
Duct Sensor Humidity / Temperature For measuring the relative or absolute humidity and temperature in duct applications. The measured values and absolute humidity, dewpoint and enthalpy are transmitted
More informationBelimo Gateway MP to Modbus RTU - UK24MOD
Product information UK24MOD MODBUS RTU Belimo Gateway MP to Modbus RTU - UK24MOD Contents Complete overview 2 Technical data 3 Safety notes 4 Product features 4 Installation and commissioning 4 Electrical
More informationOutput signal active note. Output signal. temperature DC V, DC V DC V, DC V DC V
Duct Air Quality Sensor Duct air quality sensor for detection of CO₂ with 0 to10 V output. Optional integrated, humidity, VOC sensors and LCD display. Type Overview Type active CO₂ 22DC-11 22DC-110L 22DCK-11
More informationRotary actuators for ball valves
s 4 655 Rotary actuators for ball valves for ball valves VA..60.. / VB..60.., AC 24 V / DC 24 V / AC 230 V GSD..41.9A Electromotoric rotary actuators without spring return For On-Off control (2 wire SPDT)
More informationA CLOSER LOOK. Electronic Fail-Safe Series Direct Coupled Actuators. The Belimo Difference. Brushless DC Motor for Added Accuracy and Controllability
Electronic Fail-Safe Series Direct Coupled Actuators A CLOSER LOOK Brushless DC Motor for Added Accuracy and Controllability Cut Labor Costs with Simple Direct Coupling Self-Centers on 1.05" or 3/4" with
More informationZN230-24MP-1 MP-BUS
Actuators for heating, ventilation, air conditioning.. 4.. 6. ZN0-4- Product Information -Bus Power Unit # s-009-e- -BUS ZN0-4 ZN0-4 ZN0-4 Subject to technical changes 04090 / / -Bus Power Unit ZN0-4 Contents
More informationAir Damper Actuators Modbus RTU
s OpenAir Air Damper Actuators Modbus RTU GEB.., GIB.. Non-spring return types Damper actuators 15 Nm / 35 Nm (non-spring return) with Modbus communication GEB.. 15 Nm nominal torque GIB.. 35 Nm nominal
More informationBUS. Adaptive control system for pressure applications (STP) Table of contents
Product information System STP Adaptive control system for pressure applications (STP) MP BUS TECHNOLOGY BY BELIMO Table of contents Overview of the system 2 System description 3 Technical data sheets
More informationEY-EM : Remote I/O module, ecolink
EY-EM 510...512: Remote I/O module, ecolink510...512 How energy efficiency is improved Optimum adjustment to applications by means of module technology. Reduction in wiring Features Part of the SAUTER
More informationAir Damper Actuators Modbus RTU
s OpenAir Air Damper Actuators Modbus RTU GMA.., GCA.. Spring return types Air Damper actuators 7 Nm / 18 Nm (spring return) with Modbus communication GMA.. 7 Nm nominal torque GCA.. 18 Nm nominal torque
More informationVAV compact controller KNX / PL-Link
s 3 547 OpenAir VAV compact controller KNX / PL-Link Series E GDB181.1E/KN GLB181.1E/KN Networked compact controller featuring KNX (S-mode / LTE-mode) and PL- Link capability for plants with variable air
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LR24ALON Communicative rotary actuator for ball valves Nominal torque 5 Nm Nominal voltage AC/DC 24 V Communication via LONWORKS (F-10A) Conversion of sensor signals Integrated temperature
More informationPower consumption motor (motion) 2,5 W Power consumption standby (end position) 1,0 W. Position feedback -
Actuators Technical data sheet 309-024-150/SL** Spindle actuator Description Linear spindle actuator for adjusting under floor diffusers, spin air diffusers and jet nozzles in HVAC installations Force
More informationRotary version, three-position control
4 622 Residential Air damper actuators GXD..31.1 Rotary version, three-position control Electric motor-driven actuators for three-position control 1.5 Nm nominal torque AC 24 V or AC 230 V rated voltage
More informationInstallation instructions Inclination sensor EC2019 EC / / 2013
Installation instructions Inclination sensor UK EC219 EC245 739215 / 3 1 / 213 Inhalt 1 Safety instructions 3 2 Mounting 4 3 Electrical connection 4 4 Dimensions 4 5 Technical Data 5 6 Characteristics
More informationSAX.. ACVATIX Electromotive actuators for valves. with a 20 mm stroke
s 4 501 ACVATIX Electromotive actuators for valves SAX.. with a 20 mm stroke SAX31.. Operating voltage AC 230 V, 3-position control signal SAX61.. Operating voltage AC/DC 24 V, control signal DC 0 10 V,
More informationElectrical Actuators
OEM Electrical Actuators for valves VVP459..., VXP459..., VMP459..., VXG48, VXI48, VVG549 SSC319 SSC819 SSC319 operating voltage AC 230 V 3-position control signal SSC819 operating voltage AC 24 V 3-position
More informationRoom Temperature Controller
3 023 Room Temperature Controller for four-pipe fan coil units RCC30 Outputs for on / off valve actuators Outputs for three-speed fan Control depending on room or return air temperature Operating modes:
More informationRoom Temperature Controller
3 023 Room Temperature Controller for four-pipe fan coil units RCC30 Outputs for on / off valve actuators Outputs for three-speed fan Control depending on room or return air temperature Operating modes:
More informationManual triggering of the adaption by pressing the «Adaption» button or with the PC-Tool
echnical data sheet GR4A-5 Rotary actuator for WORKS for butterfly valves orque 40 Nm Nominal voltage AC/DC 4 V Communications via WORKS (F-0A) Conversion of sensor signals Integrated temperature controller
More informationAir damper actuators
4 604 OpenAir Air damper actuators Rotary version, AC/DC 24 V and AC 230 V GQD...1 GQD 1 Electric motor-driven actuators for two-position and three-position control as well as DC 0 10 V control 2 Nm nominal
More informationManual triggering of the adaption by pressing the «Adaption» button or with the PC-Tool
echnical data sheet SR4A Rotary actuator for WORKS for - and -way characterised control valves orque 0 Nm Nominal voltage AC/DC 4 V Communications via WORKS (F-0A) Conversion of sensor signals Integrated
More informationElectrical Actuators
4 891 SSB without auxiliary switch SSB1 with auxiliary switch Electrical Actuators for small valves types VVP45, VXP45, VMP45 (max D25, k VS = 63 m 3 /h) SSB31 SSB81 SSB61 SSB31 operating voltage AC 230
More informationInstallation VAV-Compact Retrofit Set
VAV-Compact Retrofit Set NMV-D3-RE-SET VAV-Compact Retrofit Set for utilisation of existing VAV devices made by various manufacturers. for various air velocities Suitable for round VAV boxes only. General
More informationI/O module, universal, digital, S0 inputs, modu533
Product data sheet 5.1 92.046 EY-IO 533: I/O module, universal, digital, S0 inputs, modu533 How energy efficiency is improved SAUTER EY-modulo 5 technology: modular, fast and universal Features Part of
More informationElectrical Actuators
4 891 SSB without auxiliary switch Electrical Actuators for small valves types VVP45, VXP45, VMP45 (max D25, k VS = 63 m 3 /h) SSB1 with auxiliary switch SSB31 SSB61 SSB81 SSB31 operating voltage AC 230
More informationVAV Compact Controller Modbus RTU
s OpenAir VAV Compact Controller Modbus RTU G..B181.1E/MO VAV Compact Controllers 5 / 10 Nm with Modbus communication GDB181.1E/MO with 5 Nm nominal torque GLB181.1E/MO with 10 Nm nominal torque Operating
More informationRotary actuator for ball valves KNX / PL-Link
s ACVATIX Rotary actuator for ball valves KNX / PL-Link G..B111.9E/KN Rotary actuator 5 / 10 Nm with KNX communication for 6-port control ball valves and ball valves GDB111.9E/KN with 5 Nm nominal torque
More informationCLIMATIX STEQ, STCM DATASHEET FOR CONTROLLING, SWITCHING AND MONITORING FUNCTIONS. POWER SUPPLY RELAY OUTPUTS. Power supply. 4.
CLIMATIX STEQ, STCM DATASHEET FOR CONTROLLING, SWITCHING AND MONITORING FUNCTIONS. 4. Relays Power supply 2. Relays 8. Universal Inputs/ Process Bus (KNX) RS485 (Modbus) Tool (USB) Ethernet Tool (USB)/
More informationVAV compact controller GDB181.1E/3 GLB181.1E/3
s 3 544 OpenAir VAV compact controller DB181.1E/3 LB181.1E/3 Series E Compact controllers for plants with variable or constant airflow Integrated high-accuracy differential pressure sensor, actuator, and
More informationem4 Accessories Digital expansions
em4 Accessories Digital expansions Up to two digital / analog expansions can be added to the em4 nanoplc to expand up to 46 I/Os 6 digital / analog configurable inputs (0-10 VDC, 0-28.8 VDC, Potentiometer)
More informationInCos-P Pressure sensor 20 Pa Pa
InCos-P Pressure sensor 20 Pa... 7.500 Pa Electrical pressure / differential pressure sensors 24 VAC/DC supply voltage, 0...10 V / (0) analogue Compact. Easy installation. Universal. Cost effective. Safe.
More informationSignal Doublers. VariTrans A 20300
ProLine Interface Technology Signal Doublers Signal doublers with two switchable calibrated outputs in a 6 mm housing, also for applications with high output loads. The Task Isolation and transmission
More informationRXM39.1. PL-Link IO Block. Desigo TRA. Use with PXC3 series room automation station
s 3 836 3836P01 Desigo TRA PL-Link IO Block Use with PXC3 series room automation station RXM39.1 The PL-Link IO Block contains the inputs and outputs controlled by a room automation station via PL-Link.
More informationMeasuring transducers MI4x0 series Programmable transducers for RTD sensors MI450
Measuring transducers MI4x0 series Programmable transducers for RTD sensors MI450 o Measuring of resistance of RTD sensors (Pt100, Pt1000, Ni100, Cu10,...) o Accuracy class up to: 0.5 o Programmable input
More informationAndover Continuum Infinet II i2865/866 VAV Controllers with Built-in Actuator
Andover Continuum Infinet II i2865/866 VAV Controllers with Built-in Actuator The i2865 and i2866 are unique, low-cost VAV box controllers that come equipped with a built-in actuator to streamline hardware
More informationControl engineering information VARYCONTROL VAV Units VAV Compact flow rate controller BC0 BF0
Control engineering information VARYCONTROL VAV Units flow rate controller BC0 BF0 The art of handling air Contents 1 General information 3 Correct use 3 Materials 3 Maintenance 3 2 Field of application,
More informationRXL24.1. Room controller RXL. Communicating controller for chilled ceiling and radiator applications CC-02
s 3 878 RXL Room controller RXL24.1 Communicating controller for chilled ceiling and radiator applications CC-02 The RXL24.1 room controller is used for temperature control in individual rooms. For chilled
More informationSuper universal modules
s 8 174 TX-I/O Super universal modules TXM1.8X TXM1.8X-ML Two fully compatible versions: TXM1.8X: 8 inputs/outputs with LED signal / fault indication TXM1.8X-ML: As TXM1.8X, but with additional local override
More informationOperating instructions. Switching amplifier DN0210 DN / / 2015
Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5
More informationTXM1.8T. Triac module Used for Thermic and motor-driven actuators (AC 24 V) TX-I/O
s 8 179 8179p01 TX-I/O Triac module sed for Thermic and motor-driven actuators (AC 24 V) AC 24 V-controlled devices TXM1.8T 8 triac outputs (AC 24 V), configured individually for: Permanent contact Three-point
More informationZelio Control-modular measurement and control relays 1
Presentation, description 1 106439 RM35 TM111MW Presentation Motor temperature measurement and 50MW and RM35 TM250MW monitor the following, on 3-phase supplies: correct sequencing of phases L1, L2 and
More informationCompact actuating room automation stations, BACnet/IP, AC24 V (Actuating DXR)
Desigo Room Automation Compact actuating room automation stations, BACnet/IP, AC24 V (Actuating DXR) DXR2.E10PL-102B, DXR2.E10PLX-102B Combination room automation station and actuator for buildings with
More informationRoom Temperature Controllers
3 021 Room Temperature Controllers for two-pipe fan coil units RCC10 Output for on / off valve actuator Outputs for three-speed fan Control depending on the room or return air temperature (RCC10) Automatic
More informationElectromotoric actuators
4 861 ACVATIX Electromotoric actuators for Combi-valve types VPI45.., DN15 32 SSD31.. SSD81.. SSD61.. SSD31.. operating voltage AC 230 V 3-position control signal SSD81.. operating voltage AC 24 V 3-position
More informationUniversal Controller
3 342 Universal Controller For comfort control in HVAC & R-Systems Standalone electronic universal controller with P or PI response Operating voltage in accordance to type AC 24 V Control application selectable
More informationRXB10.1. Room controller. Siemens Building Technologies Building Automation DESIGO RXB. for chilled ceilings and radiators with EIB bus communication
3 870 DESIO RXB Room controller for chilled ceilings and radiators with EIB bus communication RXB10.1 The RXB10.1 controller is used for temperature control in individual rooms: For chilled ceilings and
More informationDigital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
More informationOperating instructions. Standstill monitor A / / 2011
Operating instructions Standstill monitor A300 UK 1 2 3 4 5 6 7 8 7390337 / 01 02 / 2011 1 2 3 4 5 6 7 8 switchpoint min max pulse/min power Made in Germany ifm electronic gmbh D 45127 Essen func. I II
More informationTM172PBG42R Modicon M172 Performance Blind 42 I/Os, Ethernet, Modbus
Product data sheet Characteristics TM172PBG42R Modicon M172 Performance Blind 42 I/Os, Ethernet, Modbus Product availability : Stock - Normally stocked in distribution facility Price* : 427.58 USD Main
More informationTXM1.8U TXM1.8U-ML. Universal modules TX-I/O
8 173 TX-I/O niversal modules TXM1.8 TXM1.8-ML Two fully compatible versions: TXM1.8: 8 inputs/outputs with LED signal / fault indication TXM1.8-ML: As TXM1.8, but with additional local override facility
More informationRXTH DUAL ROOM SENSOR / SWITCH
DUAL ROOM SENSOR / SWITCH FOR TEMPERATURE AND RELATIVE HUMIDITY Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE
More information