Quick Start Guide. 4-PORT HDBaseT SPLITTER. Operating Instructions

Transcription

1 Quick Start Guide 4-PORT HDBaseT SPLITTER Features Incorporates HD Base-T technology Distributes 1 HDMI source to 4 HDMI Displays simultaneously. Full HD support: 1080p@60Hz@48 b/pixels, support 3D and 4Kx2K Extends HDMI and IR up to 328 feet (100 meters) using one CAT5e (or better) cable With Infrared control signal passing through function. Supports high bit-rate audio formats (Dolby True-HD / DTS Master Audio ) 100BaseT Ethernet &RS-232 Pass-Through (Output1) HDCP Compliant compliant. HDCP CEC Pass-Through DC 12V power supply 1

2 TABLE OF CONTENTS Package Contents Dimensional drawing Panel Descriptions Connecting and Operating Typical Application Maintenance Product Service Warranty Packing contents 1) Main Unit: 1x4 HDBaseT Splitter 2) Power supply DC 12V 2A 3) IR-TX cable x 4PCS 4) IR-RX cable x 4 PCS 5) M3x5 Screw x 6PCS 6) Operating Instructions 7) Mounting ear Dimensional drawing 33mm 160mm 295mm 2 8

3 -5 to +35 C(+23 to +95 F) 5 to 90%RH (No Condensation) 300MHz/9Gbps Up to 1080p@60Hz@48 b/pixels, support 3D,4K HDMI receptacle. RJ45 Power connector terminal Power DC receptacle IR Blaster D-Type 9pin plug 1080P 328FT/100m over single CAT5E/6 cable V/ 12VDC 2A power supply 12Watts Cold-Rolled (Cold Rolled) Steel W295xH160xT33mm 1400g 3

4 Front Panel Power ON/OFF Reset key Status indicator lamp:the LED will illuminate when the HDMI equipment is connected. Power indicator lamp:the LED will illuminate when the power is on Rear Panel RS232 port Output1 port ( Ethernet,RS232&IR pass-though) HDMI input port Ethernet port Output2,3&4 port ( IR pass-though) Power input port Connecting and operating 1) Connect the HDMI input sources into HDBaseT splitter. 2) Connect HDMI receiver over Cat5e/Cat6 cables to both the Cat5e/6 port of HDBaseT Splitter and Cat5e/6 port of Receiver,The RJ45 connections must follow EIA-TIA 568b standards. 3) Connect the HDMI output from the Receiver(RX) into the display HDMI input. emitter onto the source IR windows.. 5) Connect IR-RX cable into IR-RX port on the receiver and af x the receiver on the display frame /bezel or the display stand. Note Do not a x the emitter until the placement is tested. 6) Power up all units, the splitter,receiver sources and displays. 4

5 7) To get on the ethernet,pls connect as below steps: 1.Connect ethernet cable into ethernet port on HDBaseT splitter. 2.Connect ethernet cable with TV and ethernet extender receiver Note:1.The ethernet function is designed for ethernet compatible receiver units only. 2.Only output1 with ethernet function. 8) Copy EDID function Front Panel Copy the EDID of the sink which connected the OUTPUT3,it is suggested to put lowest or For example: One SDTV(480p),one HDTV(1080p), in order to make the 4 TV work, you need to put the SDTV is connected to the output 3. Power ON/OFF Reset key Status indicator lamp:the LED will illuminate when the HDMI equipment is connected. Power indicator lamp:the LED will illuminate when the power is on Rear Panel RS-232 pin assignment HDBaseT Splitter Computer RS232 port PIN Assignment 1 NC 1 NC 1 RS232 port 2 Ethernet port 3 Output1 2 port ( Ethernet,RS232&IR TX pass-though) 4 Output2,3&4 2 port ( IR pass-though) RX 5 HDMI input port 6 Power input port 3 RX 3 TX Connecting and operating 1) Connect 4the HDMI input NC sources into HDBaseT splitter. 4 NC 2) Connect HDMI receiver over Cat5e/Cat6 cables to both the Cat5e/6 port of HDBaseT Splitter and Cat5e/6 5 port of Receiver,The GND RJ45 connections must follow 5EIA-TIA 568b standards. GND 3) Connect the HDMI output from the Receiver(RX) into the display HDMI input. 6 NC 6 NC emitter 7onto the source IR NCwindows.. 7 NC 5) Connect IR-RX cable into IR-RX port on the receiver and af 8 NC x the 8receiver on the display NC frame /bezel or the display stand. Note Do 9 not a x the NC emitter until the placement 9 is tested. NC 6) Power up all units, the splitter,receiver sources and displays. 5 PIN Assignment

6 Router Internet HDMI cable Cat5e cable IR cable RS232 cable Output1 Receiver Receiver Receiver Receiver HDMI cable Ethernet cable IR-RX IR-RX HDTV HDTV HDTV Smart TV 6

7 2 7

8 8 8