ABB 670 series version 1.2 IEC TICS (Tissue Implementation Extra Information)

Transcription

1 Copyright 2005 ABB. All rights reserved. ABB 670 series version 1.2 IEC TICS (Tissue Implementation Extra Information) Summary: This document contains the information about the supported Tissues from UCA user forum, implemented in ABB 670 series products, version 1.2 The TICS document is one of the conformance documents stated in the IEC standard. Type des. Prep. TP/T / Rolf Sievert Doc. kind Declaration of Conformity No. of p. Appr. / Apell Gert Title ABB 670 series ver IEC61850 Resp. dept TP/T Approved TICS Part. FILE: IED670_series_ver_1.2_IEC61850_TICS.doc; SAVEDATE: :36; TEPLATE: Techn_Doc_Stand_P.dot C; SKELETON: 1RG en B 1 8

2 of content: 1 Introduction Related documents Included Tissues Introduction IEC part 6 Tissues IEC part 7-2 Tissues IEC Part 7-3 Tissues IEC Part 7-4 Tissues IEC Part 8-1 Tissues IEC Part 10 Tissues Introduction This document serves as the PIXIT document for the IEC implementation in the ABB 670 series products.. The intention is to declare how the IEC is applied and used in the ABB 670 series, version 1.2. The document is organized according to the IEC standard and lists the different aspects within the defined scope of this paper. 2 Related documents Document Id IEC (2003) IEC (2003) IEC (2003) IEC (2003) IEC (2003) IEC (2003) Title Substations Part 5: Communication requirements for functions and device models Substations Part 6: Configuration description language for communication in electrical substations related to IEDs Substations Part 7-1: Basic communication structure for substation and feeder equipment Principles and models Substations Part 7-2: Basic communication structure for substations and feeder equipment Abstract communication service interface (ACSI) Substations Part 7-3: Basic communication structure for substation and feeder equipment Common data classes Substations Part 7-4: Basic communication structure for substation and feeder equipment Compatible logical de classes and data classes 1RG en B 2

3 Document Id IEC (2003) IEC (2005) ABB 1RK ABB 1RK ABB 1RG Title Substations Part 8-1: Specific communication service mapping (SCS) apping to S(ISO/IEC 9506 Part 1 and Part 2) Substations Part 10: Conformance testing ABB 670 series ver IEC ICS; odel Implementation conformance statement ABB 670 series ver 1.2- IEC PICS; Protocol Implementation conformance statement ABB 670 series ver IEC PIXIT; Protocol Implementation conformance statement 3 Included Tissues 3.1 Introduction The following Tissues in this chapter, according to the menclature of UCA users group, are supported in the ABB 670 series product family, version 1.2. This chapter contains the information about the tissues conformance statement The following is applied in this chapter: The conformance (/O) column indicates: x.y; andatory, tissue is included in the UCA Device conformance test procedures version x.y and stated as mandatory O ; tbd; Optional, the tissue is t yet included in the test procedures or it s a recommendation or it s optional in the IEC documents To be defined, the proposal is t defined in such detail to be implemented or tested - ; Not applicable, just editorial, change for implementation and testing The supported () column indicates: ; es the tissue is implemented in the device N ; No the tissue is t implemented in the device na ; Not applicable, the tissue is t applicable for the device 1RG en B 3

4 3.2 IEC part 6 Tissues Part 6 Tissue No Clause/ Subclau se 1 Annex A5 "[1-2]?\d{1,2}\.[1-2]?\d{1,2}\.[1-2]?\d{1,2}\.[1-2]?\d{1,2}" 3 Annex B Check the ENUs and complete the appendix: AutoRecSt, FltLoop, PmpCtl; The ICD/SCD files should include these ENUS when used 5 Annex A SCL_Enu Add definition for the following 8-1 attributes in ms.xsd part 6 / XL schema: SBO, SBOw, Oper, Cancel, Check 7 The unique key in SCL schema is the name without FC, therefore it is t possible to specify the same attribute with different FCs. This is also t needed: the only attribute with two FCs are setting parameters (FC=SG, SE), where each specification with SG implicitly means an SE on S level, if editing is supported at all. /O 8 Annex B Use name Watts for code 62 instead of W O 9 Annex A Change XL schema to allow control blocks O without a dataset reference 10 Annex A Add the btype Check to the schema, to be used O for the Check attribute. O 11 IED-Name could be used as a host name. To ensure interoperability the IP address shall be mandatory in the SCD-File. O 3.3 IEC part 7-2 Tissues Part 7-2 Clause/ Tissue Subclause h Figure/ Change sentence to The parameter T shall be the time when the client send the control Figure 26; and figure requests Add te: Applications may choose to publish both transitions of transient or pulsed data attribute values (e.g. a trip). Other applications could choose to publish only on a significant event (e.g. start). Change GoCB attribute name from AppID to GoID. /O 1RG en B 4

5 Part 7-2 Clause/ Tissue Subclause h Figure/ Add Attribute DstAddress after the Attribute NdsCom DstAddress The attribute DstAddress shall be the SCS specific addressing information like media access address, priority, and other information Change The parameter T shall be the time when the client sends the control requests. Add NOTE: Control requests can be Select, Operate, or Cancel Add new AddCause value: Object-t-selected , 34 Canceling a command as long as Oper_resp+ has been received. Compare new state diagram The SqNum shall be set to 0 to indicate the first GOOSE transmission initiated by a value (increment of StNum) change. /O O 1RG en B 5

6 IEC Part 7-3 Tissues Part 7 Tissue Clause/ Subclau se /O 3.4 IEC Part 7-4 Tissues Part 7-4 No Clause/ Subclau se Str, Op Str and Op in GAPC shall be optional CBOpCap Put it into optional. In Retrofit situation the SwOpCap information may t be available for the SAS AlmThm Declared as SPS (former ACT) 343 ATCC.Par Declared as SPS Op /O 1RG en B 6

7 IEC Part 8-1 Tissues Part 8-1 Tissue Clause / Subcla use 109 Annex B1 Extent address spaces in 5 th byte: B GOOSE 01-0c-cd bis 01-0c-cd- 01-FF-FF GSE 01-0c-cd bis 01-0c-cd-02-FF-FF ulticast Sampled values 01-0c-cd bis 01-0c-cd-04-FF-FF B1 is informative, restriction, it is just a recommendation 116 A S GetNameList request with a n-existing domain shall be responded by Confirmed Error- PDU The LD/ldname directories are only needed, if files exist, which belong to some LD; if only files exist which belong to the whole server, then the root directory (as mentioned in the existing te) is sufficient. /O O y IEC Part 10 Tissues Part 10 Tissue Clause/ Subclau se /O 1RG en B 7

8 REVISION Rev. ind. Page (P) Chapt. (C) Description A All Initial version for ABB 670 series version 1.2. Based upon 1RK Date Dept./Init TP/T RoSi 1RG en B 8