TYPE APPROVAL CERTIFICATE

Transcription

1 TYPE APPROVAL CERTIFICATE Certificate No: TAA000001M This is to certify: That the Peripheral Equipment with type designation(s) RS900-24, RS900-HI, RS900G-24, RS900G-HI, RSG2100 Issued to Siemens Canada Limited Concord ON, Canada is found to comply with Det Norske Veritas' Rules for Classification of Ships, High Speed & Light Craft and Det Norske Veritas' Offshore Standards Application : Product(s) approved by this certificate is/are accepted for installation on all vessels classed by DNV GL. Location classes: Temperature D* Humidity B Vibration A EMC A Enclosure A * Tested to -40 C and +85 C This Certificate is valid until Issued at Høvik on DNV GL local station: Montreal for DNV GL Approval Engineer: Nils Jarem Odd Magne Nesvåg Head of Section This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. Form code: TA 1411a Revision: Page 1 of 5 DNV GL DNV GL and the Horizon Graphic are trademarks of DNV GL AS.

2 Product description RUGGEDCOM INDUSTRIAL ETHERNET SWITCH MODELS: RS900, RS900G and RSG2100 RS900-PS-M-P7P8-P9-MOD PS: Power Supply 24 = 24 VDC (10-36 VDC) HI = VAC or VDC M: Mounting Option P = Panel Mount P7, P8, P9: Port 7-9 Options* 00 = No port TX = 10/100TX (if selected, port 7&8 must both be TX) 1x 100FX MJ = 1 x 100FX - Multimode 1300nm, MTRJ connector MC = 1 x 100FX - Multimode 1300nm, SC connector MT = 1 x 100FX - Multimode 1300nm, ST connector ML = 1 x 100FX - Multimode 1300nm, LC connector T2 = 1 x 100FX - Singlemode 1310nm, ST connector, Standard 20km L2 = 1 x 100FX - Singlemode 1310nm, LC connector, Standard 20km L5 = 1 x 100FX - Singlemode 1310nm, LC connector, Intermediate Reach 50km L9 = 1 x 100FX - Singlemode 1310nm, LC connector, Long Reach 90km C2 = 1 x 100FX - Singlemode 1310nm, SC connector, Standard 20km C5 = 1 x 100FX - Singlemode 1310nm, SC connector, Intermediate Reach 50km C9 = 1 x 100FX - Singlemode 1310nm, SC connector, Long Reach 90km XX = None RS900G-PS-M-P9P10-MOD PS: Power Supply 24 = 24 VDC (10-36 VDC) HI= VDC or VAC M: Mounting Option P = Panel Mount P9P10 Transceiver Options (21: 2SFP = Dual 1000X SFP (Mini-GBIC). Order SFP Optics Separately. 2LCMM = Dual 1000SX Multimode LC 850nm 500m 2LC10 = Dual 1000LX Singlemode LC 1310nm 10km 2LC25 = Dual 1000LX Singlemode LC 1310nm 25km 2SC10 = Dual 1000LX Singlemode SC 1310nm 10km 2SC25 = Dual 1000LX Singlemode SC 1310nm 25km SFP (Mini-GBIC) Transceiver Options <1H2>: = 1000SX SFP, Multimode, LC, 850nm, 500m 1~ = 1000LX SFP, Singlemode, LC, 1310nm, 10 km = 1000LX SFP, Singlemode, LC, 1310nm, 25 km = 1000LX SFP, Singlemode, LC, 1550nm, 70 km 1~ = 1000TX SFP, RJ45 Form code: TA 1411a Revision: Page 2 of 5

3 XX= None RSG2100 Main-Mount-PS1- PS2- S1- S2- S3- S4- S5- S6- S7- S8- S9- S10- MOD Main: Ethernet and Power Connectors R = Ethernet on rear; LED panel on front; power connector on rear F = Ethernet on front; LED panel on front; power connector on rear B = Ethernet on rear; LED panel on top; power connector on rear T = Ethernet on front; LED panel on top; power connector on rear Mount: Mounting Options RM = 19 Rack Mount Kit PS1 and PS2: Power Supply 1 and 2(5) 24 = 24VDC (10-36VDC), screw terminal block HI = VDC or VAC, screw terminal block 24P = 24VDC (10-36VDC), pluggable terminal block HIP = VDC or VAC, pluggable terminal block XX = No Power Supply (PS2 Only) S1, S2, S3, S4, S7, S8, S9 and S10: Ethernet Modules for Slots 1, 2, 3, 4, 7, 8, 9 and 10 XXXX = Empty TX01 = 2 x 10/100Tx RJ45 TX02 = 2 x 10/100Tx micro-d FL01 = 2 x 10FL - Multimode, 850nm, ST FX01 = 2 x 100FX - Multimode, 1300nm, ST FX02 = 2 x 100FX - Multimode, 1300nm, SC FX11 = 2 x 100FX - Multimode, 1300nm, LC FX03 = 2 x 100FX - Multimode, 1300nm, MTRJ FX04 = 2 x 100FX - Singlemode, 1310nm, ST, 20km FX05 = 2 x 100FX - Singlemode, 1310nm, SC, 20km FX06 = 2 x 100FX - Singlemode, 1310nm, LC, 20km FX07 = 2 x 100FX - Singlemode, 1310nm, SC, 50km FX08 = 2 x 100FX - Singlemode, 1310nm, LC, 50km FX09 = 2 x 100FX - Singlemode, 1310nm, SC, 90km FX10 = 2 x 100FX - Singlemode, 1310nm, LC, 90km S5, S6: Gigabit Ethernet Modules for slot 5 and 6. XXXX = Empty CG01 = 2 x 10/100/1000TX RJ45 CG02 = 2 x 10/100/1000TX micro-d FG01 = 2 x 1000SX - Multimode, 850nm, LC, 500m FG02 = 2 x 1000LX - Singlemode, 1310nm, SC connectors, 10km FG03 = 2 x 1000LX - Singlemode, 1310nm, LC connectors, 10km FG04 = 2 x 1000LX - Singlemode, 1310nm, SC connectors, 25km FG05 = 2 x 1000LX - Singlemode, 1310nm, LC connectors, 25km FG50 = 2 x 1000LX SFP - Blank (no optical transceiver) FG51 = 2 x 1000SX SFP - Multimode, 850nm, LC, 500m FG52 = 2 x 1000LX SFP - Singlemode, 1310nm, LC, 10km FG53 = 2 x 1000LX SFP - Singlemode, 1310nm, LC, 25km FG54 = 2 x 1000LX SFP - Singlemode, 1550nm, LC, 70km FG70 = 2 x 1000LX GBIC - Blank (no optical transceiver) FG71 = 2 x 1000LX GBIC - Singlemode, 1310nm, SC, 10km Form code: TA 1411a Revision: Page 3 of 5

4 FG72 = 2 x 1000LX GBIC - Singlemode, 1310nm, SC, 25km FG73 = 2 x 1000LX GBIC - Singlemode, 1550nm, SC, 70km XX = None Approval conditions The Type Approval covers hardware listed under Product description. When the hardware is used in applications to be classed by DNV, documentation for the actual application is to be submitted for approval by the manufacturer of the application system in each case. Reference is made to DNV Rules for Ships Pt.4 Ch.9 Control and Monitoring Systems. Application/Limitation For mounting in areas where vibration location class A is required, mounting kits are needed, DIN rail mounting is not sufficient. RSG2100 must be mounted with rack mountings both front and back. Compass safe distances: - RS900-24: Standard: 45cm, Steering: 30cm - RS900-HI: Standard: 60cm, Steering: 45cm - RS900G: Standard: 65cm, Steering: 45cm - RSG2100: Standard: 140cm, Steering: 90cm Type Approval documentation Data sheets: RuggedSwitch RS900G rev. 2h RuggedSwitch RS900NC rev. 2t RuggedSwitch RSG2100NC rev. 3d Manuals: RC1024-EN-02 dated , RUGGEDCOM RS900 Installation Guide RC1025-EN-02 dated , RUGGEDCOM RS900G Installation Guide RC1040-EN-04 dated , RUGGEDCOM RSG2100 Installation Guide Test reports: rev rev S rev R4 rev rev. 2 TIC rev. 1 DNV GL Montreal type approval assessment report dated Tests carried out Applicable tests according to Standard for Certification No. 2.4, April For the bridge mounted components the Compass safe distance was measured according to section 11.2 of IEC th edition (2002). Marking of product The products to be marked with: - model name - manufacturer name - serial number Form code: TA 1411a Revision: Page 4 of 5

5 Periodical assessment The scope of the periodical assessment is to verify that the conditions stipulated for the type are complied with, and that no alterations are made to the product design or choice of systems, software versions, components and/or materials. The main elements of the assessment are: Ensure that type approved documentation is available Inspection of factory samples, selected at random from the production line (where practicable) Review of production and inspection routines, including test records from product sample tests and control routines Ensuring that systems, software versions, components and/or materials used comply with type approved documents and/or referenced system, software, component and material specifications Review of possible changes in design of systems, software versions, components, materials and/or performance, and make sure that such changes do not affect the type approval given Ensuring traceability between manufacturer s product type marking and the type approval certificate Periodical assessment is to be performed at least every second year and at renewal of this certificate. END OF CERTIFICATE Form code: TA 1411a Revision: Page 5 of 5