SIMATIC S /2 Introduction

Size: px
Start display at page:

Download "SIMATIC S /2 Introduction"

Transcription

1 /2 Introduction /4 Central processing units /4 CPU 221, 222, 224, 224 XP, 226 /22 SIPLUS central processing units /22 SIPLUS central processing units /2 Digital modules /2 Digital modules /0 SIPLUS digital modules /0 SIPLUS digital modules /1 Analog modules /1 Analog modules /4 EM 21 thermocouple module /6 EM 21 RTD module /8 SIPLUS analog modules /8 SIPLUS analog modules /9 Function modules /9 EM 25 positioning module /41 Communication /41 EM 241 modem /42 EM 277 PROFIBUS DP module /4 CP 24-2 /44 CP 24-1 /45 CP 24-1 IT /46 Power supplies /46 Power supplies /48 Human Machine Interface /48 TD 200 text display /49 TD 200C text display /50 SIMATIC TP 177micro /5 SIMATIC OP 7micro /55 Software /55 Software Siemens ST

2 SIMATIC S7-200 Introduction S7-200 Overview SIMATIC S7-200 SIMATIC S7-200 The micro PLC offers maximu m automation at minimum cost Extremely simple installation, programming and operation Large-scale integration, space-saving, powerful Can be used both for simple controls and for complex automation tasks All CPUs can be used in stan dalone mode, in networks and within distributed structures Suitable for applications where programmable controllers would not have been viable in the past With outstanding real-time performance and powerful communication options (PPI, PROFIBUS DP, AS-Interface) Shipbuilding certification from - American Bureau of Shipping (ABS) - Bureau Veritas (BV) - Des Norske Veritas (DNV) - Germanischer Lloyd (GL) - Lloyds Register of Shipping (LRS) - Registro Italiano Navale (RINA) - Nippon Kaiji Kyokai (NK) SIPLUS S7-200 The PLC for use in the hars hest environmental conditions With extended temperature range from -25 to +70 C Suitable for extraordinary medi al load (pollution gas atmosphere) Occasional short-term conden sation and increased mechanical loading permissible With the proven PLC te chnology of the S7-200 Convenient handling, programmi ng, maintenance and service Ideal for use in the automotive industry, environmental technology, mining, chemical plants, production technology, food industry etc. The alternative to expe nsive custom solutions More Information you can find at: /2 Siemens ST

3 Introduction S7-200 Technical specifications General Technical specifications SIMATIC S7-200 Degree of protection IP20 in accordance with IEC 529 Ambient temperature Operation (95% relative humidity) - With horizontal mounting 0 to 55 C - With vertical mounting 0 to 45 C Transport and storagegeneral -40 to +70 C - with 95% relative humidity 25 to 55 C Isolation 5/24 V DC circuits Test voltage 500 V AC 115/20 V AC circuits to ground Test voltage 1500 V AC 115/20 V AC circuits to Test voltage 1500 V AC 115/20 V AC circuits 20 V AC circuits to Test voltage 1500 V AC 5/24 V DC circuits 115 V AC circuits to Test voltage 1500 V AC 5/24 V DC circuits Electromagnetic compatibility Requirements of EMC law Noise immunity to EN Emitted interference according to EN and EN Mechanical rating Vibrations, tested according to/tested with Shock, tested according to/tested with Tested according to: IEC 801-2, IEC 801-, IEC 801-4, EN 50141, EN 50204, IEC 801-5, VDE 0160 Tested according to EN 55011, Class A, Group 1 and EN 55011, Class B, Group 1 IEC 68, Part 2-6: 10 to 57 Hz; constant amplitude 0. mm; 58 to 150 Hz; constant acceleration 1 g (mounted on DIN rail) or 2 g (mounted in control cabinet); type of vibration: frequency cycles with a rate of change of 1 octave/minute; vibration duration: 10 frequency cycles per axis in each direction of the mutually perpendicular axes IEC 68, Part 2-27/half-sine: shock strength 15 g (peak value), duration 11 ms, 6 shocks on each of the mutually perpendicular axes General Technical specifications SIPLUS S7-200 Ambient temperature Temperature Horizontal mounting: -25 C to 70 C Vertical mounting: -25 C to 50 C Relative humidity 5 to 95%; transient condensation permissible, corresponding to relative humidity (RH-) stress grade 2 according to IEC and IEC Cl. K5 Transient icing -25 C to 0 C IEC Cl. K5 Atmospheric pressure 1080 to 795 hpa corresponding to a height of to 2000 m Pollutant concentration SO2: < 0,5 ppm; relative humidity <60% Test: 10 ppm, 4 days H2S: < 0,1 ppm; relative humidity <60% Test: 1 ppm, 4 days (according to IEC 721 -; Class C) Mechanical environmental conditions Vibrations Type of vibration: frequency progressions changing at 1 octave per minute. 2 Hz f 9 Hz, constant amplitude,0 mm 9 Hz f 150 Hz, constant acceleration 1 g; Duration of vibration: 10 frequency progressions per axis in each direction of the three mutually perpendicular axes; Vibration testing according to IEC 68 section 2-6 (Sinus) and IEC 721 -, Class M4 Shock Type of shock: semisinusoidal shock strength: 15 g peak value, duration shock direction 11 ms: shocks each in +/- direction on each of the mutually perpendicular axes Shock testing according to IEC 68 section 2-27 Conformity EN (railroad applications - electronical device on rail vehicles) Siemens ST /

4 Central processing units CPU 221, 222, 224, 224 XP, 226 Overview The smart compact solution With 10 inputs/outputs on board Not expandable The compact high-performance CPU With 24 inputs/outputs on board Expandable with up to 7 expansion modules The superior compact solution With 14 inputs/outputs on board Expandable with up to 2 expansion modules The power CPU With 24 digital and analog inputs/outputs onboard Expandable with up to 7 expansion modules /4 Siemens ST

5 Central processing units CPU 221, 222, 224, 224 XP, 226 Overview The high-performance package for complex technical tasks With additional PPI port for added flexibility and communication options With 40 inputs/outputs on board Expansion capability for max. 7 expansion racks Technical specifications Supply voltages 6ES AA2-0XB0 6ES BA2-0XB0 6ES AB2-0XB0 6ES BB2-0XB0 Rated value - 24 V DC Yes Yes - permissible range, 20.4 V 20.4 V lower limit (DC) - permissible range, upper limit (DC) 28.8 V 28.8 V V AC Yes Yes - 20 V AC Yes Yes - permissible range, 85 V 85 V lower limit (AC) - permissible range, 264 V 264 V upper limit (AC) - permissible frequency range, 47 Hz 47 Hz lower limit - permissible frequency range, 6 Hz 6 Hz upper limit Voltages and currents Load voltage L+ - Rated value (DC) 24 V 24 V 24 V 24 V - permissible range, 20.4 V 5 V 20.4 V 5 V lower limit (DC) - permissible range, 28.8 V 0 V 28.8 V 0 V upper limit (DC) Load voltage L1 - Rated value (AC) 100 V; 100 to 20 V AC 100 V; 100 to 20 V AC - permissible range, 5 V 5 V lower limit (AC) - permissible range, 250 V 250 V upper limit (AC) - permissible frequency range, 47 Hz 47 Hz lower limit - permissible frequency range, 6 Hz 6 Hz upper limit Current consumption Inrush current, max. 10 A; at 28.8 V 20 A; at 264 V 10 A; at 28.8 V 20 A; at 264 V from supply voltage L+, max. 450 ma; 80 to 450 ma 500 ma; 85 to 500 ma, output current for expansion modules (5 V DC) 40 ma from supply voltage L1, max. 120 ma; 15 to 60 ma (240 V), 0 to 120 ma (120 V); output current for expansion modules (5 V DC) 40 ma 140 ma; 20 to 70 ma (240 V), 40 to 140 ma (120 V); output current for expansion modules (5 V DC) 40 ma Siemens ST /5

6 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) back-up battery - Backup time 50 h; (min. 8 h at 40 C); 200 days (typ.) with optional battery module Memory/backup Memory - Number of memory modules (optional) 6ES AA2-0XB0 6ES BA2-0XB0 6ES AB2-0XB0 6ES BB2-0XB0 1; pluggable memory module, content identical to integral EEPROM, in addition, recipes, data logs and other files can be saved. 50 h; (min. 8 h at 40 C); 200 days (typ.) with optional battery module 1; pluggable memory module, content identical to integral EEPROM, in addition, recipes, data logs and other files can be saved. 50 h; (min. 8 h at 40 C); 200 days (typ.) with optional battery module 1; pluggable memory module, content identical to integral EEPROM, in addition, recipes, data logs and other files can be saved. Data memory and program memory - Data memory, max. 2 KByte 2 KByte 2 KByte 2 KByte - Program memory, max. 4 KByte 4 KByte 4 KByte 4 KByte Backup - available Yes; Program: entire program maintenancefree in integral EEPROM, programmable via CPU; data: entire DB 1 loaded from PG/PC maintenance-free in integral EEPROM, current values of DB 1 in RAM, retentive flags, timers, counters etc., maintenance free via super capacitor; optional battery Yes; Program: entire program maintenancefree in integral EEPROM, programmable via CPU; data: entire DB 1 loaded from PG/PC maintenance-free in integral EEPROM, current values of DB 1 in RAM, retentive flags, timers, counters etc., maintenance free via super capacitor; optional battery Yes; Program: entire program maintenancefree in integral EEPROM, programmable via CPU; data: entire DB 1 loaded from PG/PC maintenance-free in integral EEPROM, current values of DB 1 in RAM, retentive flags, timers, counters etc., maintenance free via super capacitor; optional battery CPU/processing times for bit instruction, max. 0,22 µs 0,22 µs 0,22 µs 0,22 µs Timers/counters and their retentive characteristics S7 counter -Number of which retentive with battery - adjustable Yes; via super capacitor or battery Yes; via super capacitor or battery Yes; via super capacitor or battery - lower limit upper limit Counting range - lower limit upper limit S7 times -Number of which retentive with battery - adjustable Yes; via super capacitor or battery Yes; via super capacitor or battery Yes; via super capacitor or battery - upper limit Timing range - lower limit 1 ms 1 ms 1 ms 1 ms - upper limit 54 min; 4 times, 1 ms to 0 s 16 times, 10 ms to 5 min 26 times, 100 ms to 54 min 54 min; 4 times, 1 ms to 0 s 16 times, 10 ms to 5 min 26 times, 100 ms to 54 min 54 min; 4 times, 1 ms to 0 s 16 times, 10 ms to 5 min 26 times, 100 ms to 54 min 50 h; (min. 8 h at 40 C); 200 days (typ.) with optional battery module 1; pluggable memory module, content identical to integral EEPROM, in addition, recipes, data logs and other files can be saved. Yes; Program: entire program maintenancefree in integral EEPROM, programmable via CPU; data: entire DB 1 loaded from PG/PC maintenance-free in integral EEPROM, current values of DB 1 in RAM, retentive flags, timers, counters etc., maintenance free via super capacitor; optional battery Yes; via super capacitor or battery Yes; via super capacitor or battery 54 min; 4 times, 1 ms to 0 s 16 times, 10 ms to 5 min 26 times, 100 ms to 54 min /6 Siemens ST

7 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 6ES AA2-0XB0 6ES BA2-0XB0 6ES AB2-0XB0 6ES BB2-0XB0 Data areas and their retentive characteristics Flags -Number 2 Byte 2 Byte 2 Byte 2 Byte - adjustable retentivity Yes; M0.0 to M1.7 Yes; M0.0 to M1.7 Yes; M0.0 to M1.7 Yes; M0.0 to M1.7 - of which retentive with battery - of which retentive without battery Configuration Connectable programming devices/pcs Central units/expansion units, max. 0 to 255, via super capacitor or battery, adjustable 0 to 112 in EEPROM, adjustable SIMATIC PG/PC, Standard PC 0 to 255, via super capacitor or battery, adjustable 0 to 112 in EEPROM, adjustable SIMATIC PG/PC, Standard PC 0 to 255, via super capacitor or battery, adjustable 0 to 112 in EEPROM, adjustable SIMATIC PG/PC, Standard PC 2 expansion modules. Only expansion modules of the S7-22x series can be used. Because of the limited output current, the use of expansion modules may be subject to restrictions. I/O expansions - Analog inputs/outputs, max. 10; max. 8 inputs and 2 outputs (EM) or max. 0 inputs and 4 outputs (EM) - Digital inputs/outputs, max. 78; max. 40 inputs and 8 outputs (CPU+EM) - AS interface inputs/outputs, max. Connection system 1; AS interface slaves (CP 24-2) 0 to 255, via super capacitor or battery, adjustable 0 to 112 in EEPROM, adjustable SIMATIC PG/PC, S tandard PC 2 expansion modules. Only expansion modules of the S7-22x series can be used (because of the limited output current, the use of expansion modules may be subject to restrictions.) 10; max. 8 inputs and 2 outputs (EM) or max. 0 inputs and 4 outputs (EM) 78; max. 40 inputs and 8 outputs (CPU+EM) 1; AS interface slaves (CP 24-2) Pluggable I/O terminals No No No No 1st interface Type of interface integrated RS 485 interface integrated RS 485 interface integrated RS 485 interface integrated RS 485 interface Physical RS 485 RS 485 RS 485 RS 485 Functionality -MPI Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S7-400-CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s - PPI Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s - Serial data Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4.8/9.6/19. 2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S7-400-CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4.8/9.6/19. 2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S7-400-CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4.8/9.6/19. 2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters S7-00/S7-400-CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4.8/9.6/19. 2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Siemens ST /7

8 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 6ES AA2-0XB0 6ES BA2-0XB0 6ES AB2-0XB0 6ES BB2-0XB0 MPI - Transmission rates, max kbit/s kbit/s kbit/s kbit/s - Transmission rates, min kbit/s 19.2 kbit/s 19.2 kbit/s 19.2 kbit/s CPU/ programming Programming language -LAD Yes Yes Yes Yes -FBD Yes Yes Yes Yes -STL Yes Yes Yes Yes Instruction set User program protection/password protection Bit logic compare timer counter clock integer math floating-point math numeric functions, move table logic shift and rotate conversion program control interrupt and communications logic stack instructions Yes; -stage password protection Program execution free cycle (OB 1), interrupt-driven, time-driven (1 to 255 ms) Program organization 1 OB, 1 DB, 1 SDB subprograms with/without parameter transfer Bit logic compare timer counter clock integer math floating-point math numeric functions, move table logic shift and rotate conversion program control interrupt and communications logic stack instructions Yes; -stage password protection free cycle (OB 1), interrupt-driven, time-driven (1 to 255 ms) 1 OB, 1 DB, 1 SDB subprograms with/without parameter transfer Bit logic compare timer counter clock integer math floating-point math numeric functions, move table logic shift and rotate conversion program control interrupt and communications logic stack instructions Yes; -stage password protection free cycle (OB 1), interrupt-driven, time-driven (1 to 255 ms) 1 OB, 1 DB, 1 SDB subprograms with/without parameter transfer Number of sub-programs, max Digital inputs Number of digital inputs 6; integrated 6; integrated 8 8 Length of cable - Length of cable shielded, max 500 m; Standard input: 500m, fast counters: 50m - Length of cable unshielded, max 00 m; not for high-speed signals 500 m; Standard input: 500m, fast counters: 50m 00 m; not for high-speed signals 500 m; Standard input: 500m, fast counters: 50m 00 m; not for high-speed signals Bit logic compare timer counter clock integer math floating-point math numeric functions, move table logic shift and rotate conversion program control interrupt and communications logic stack instructions Yes; -stage password protection free cycle (OB 1), interrupt-driven, time-driven (1 to 255 ms) 1 OB, 1 DB, 1 SDB subprograms with/without parameter transfer 500 m; Standard input: 500m, fast counters: 50m 00 m; not for high-speed signals m/p reading Yes; optional, per group Yes; optional, per group Yes; optional, per group Yes; optional, per group Input voltage - Rated value, DC 24 V 24 V 24 V 24 V - for signal "0" 0 to 5 V 0 to 5 V 0 to 5 V 0 to 5 V - for signal "1" min. 15 V min. 15 V min. 15 V min. 15 V Input current - for 1 signal, typical 2.5 ma 2.5 ma 2.5 ma 2.5 ma Input delay (at rated value of the input voltage) For standard inputs - Parameterizable Yes; all Yes; all Yes; all Yes; all - at 0 after 1, min. 0.2 ms 0.2 ms 0.2 ms 0.2 ms - at 0 after 1, max ms 12.8 ms 12.8 ms 12.8 ms for alarm inputs - parameterizable Yes; I0.0 to I0. Yes; I0.0 to I0. Yes; I0.0 to I0. Yes; I0.0 to I0. for counters/technological functions - parameterizable Yes; (E0.0 to E0.5) 0 khz Yes; (E0.0 to E0.5) 0 khz Yes; (E0.0 to E0.5) 0 khz Yes; (E0.0 to E0.5) 0 khz /8 Siemens ST

9 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 6ES AA2-0XB0 6ES BA2-0XB0 6ES AB2-0XB0 6ES BB2-0XB0 Digital outputs Number of digital outputs 4; Transistor 4; Relay 6; Transistor 6; Relay Length of cable shielded, max. 500 m 500 m 500 m 500 m Length of cable unshielded, max. 150 m 150 m 150 m 150 m Short-circuit protection No; provided externally No; provided externally No; provided externally No; provided externally of the output Limitation of voltage induced on circuit interruption to 1 W 1 W Switching capacity of the outputs - at resistive load, max A 2 A 0.75 A 2 A - at lamp load, max. 5 W 0 W DC, 200 W AC 5 W 0 W DC, 200 W AC Output voltage - for 1 signal 20 V DC L+/L1 20 V DC L+/L1 Output current - for 1 signal rated value 750 ma 2 A 750 ma 2 A - for 0 signal residual current, max. 0.1 ma 0 ma 10 µa 0 ma Output delay at resistive load - "0" after "1", max. 15 µs; of standard outputs, max. (A0.2 to A0.) 15 µs; of pulse outputs, max. (A0.0 to A0.1) 2 µs - "1" after "0", max. 10 µs; of standard outputs, max. (A0.2 to A0.) 100 µs; of pulse outputs, max. (A0.0 to A0.1) 10 µs 10 ms; all outputs 15 µs; of standard outputs, max. (A0.2 to A0.5) 15 µs; of pulse outputs, max. (A0.0 to A0.1) 2 µs 10 ms; all outputs 10 µs; of standard outputs, max. (A0.2 to A0.5) 100 µs; of pulse outputs, max. (A0.0 to A0.1) 10 µs Parallel switching of 2 outputs - to increase power Yes No Yes No Switching frequency - of pulse outputs, at resistive 20 khz; A0.0 to A khz; A0.0 to A0.1 load, max. Summation current of the outputs (per group) - up to 40 C, max. A 6 A 4.5 A 6 A - horizontal installation, up to 55 C, max. A 6 A 4.5 A 6 A Relay outputs Number of operating cycles Analog inputs Number of analog potentiometers 1; Analog potentiometer; resolution 8 bits 10,000,000; mechanical 10 million, at rated load voltage 100,000 1; Analog potentiometer; resolution 8 bits 1; Analog potentiometer; resolution 8 bits 10 ms; all outputs 10 ms; all outputs 10,000,000; mechanical 10 million, at rated load voltage 100,000 1; Analog potentiometer; resolution 8 bits Sensor supply 24 V - sensor supply - 24 V Yes; permissible range: 15.4 to 28.8 V Yes; permissible range: 20.4 to 28.8 V Yes; permissible range: 15.4 to 28.8 V Yes; permissible range: 20.4 to 28.8 V - Short-circuit protection Yes; electronic at 600 ma Yes; electronic at 600 ma Yes; electronic at 600 ma Yes; electronic at 600 ma - Output current, max. 180 ma 180 ma 180 ma 180 ma Sensor Connectable encoders - 2-wire BEROS Yes Yes Yes Yes - permissible closed-circuit current (2-wire BEROS), max. 1 ma 1 ma 1 ma 1 ma Siemens ST /9

10 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) Integral functions Number of counters 6ES AA2-0XB0 6ES BA2-0XB0 6ES AB2-0XB0 6ES BB2-0XB0 4; fast counters (each 0 khz), 2 bits (incl. sign), usable as up/down counter or for connecting 2 incremental encoders with 2 pulse trains offset by 90 (max. 20 khz (A/B counter)); parameterizable enable and reset input; interrupt options (incl. Call up a sub-program with any content) when the setpoint value is reached; change of count direction etc. 4; fast counters (each 0 khz), 2 bits (incl. sign), usable as up/down counter or for connecting 2 incremental encoders with 2 pulse trains offset by 90 (max. 20 khz (A/B counter)); parameterizable enable and reset input; interrupt options (incl. Call up a sub-program with any content) when the setpoint value is reached; change of count direction etc. 4; fast counters (each 0 khz), 2 bits (incl. sign), usable as up/down counter or for connecting 2 incremental encoders with 2 pulse trains offset by 90 (max. 20 khz (A/B counter)); parameterizable enable and reset input; interrupt options (incl. Call up a sub-program with any content) when the setpoint value is reached; change of count direction etc. 4; fast counters (each 0 khz), 2 bits (incl. sign), usable as up/down counter or for connecting 2 incremental encoders with 2 pulse trains offset by 90 (max. 20 khz (A/B counter)); parameterizable enable and reset input; interrupt options (incl. Call up a sub-program with any content) when the setpoint value is reached; change of count direction etc. Count frequency (counters) max. 0 khz 0 khz 0 khz 0 khz Number of alarm inputs 4; 4 rising edges 4; 4 rising edges 4; 4 rising edges 4; 4 rising edges and/or 4 falling edges and/or 4 falling edges and/or 4 falling edges and/or 4 falling edges Number of pulse outputs 2; fast outputs, 20 khz, with interrupt option; pulse width and frequency modulation 2; fast outputs, 20 khz, with interrupt option; pulse width and frequency modulation 2; fast outputs, 20 khz, with interrupt option; pulse width and frequency modulation 2; fast outputs, 20 khz, with interrupt option; pulse width and frequency modulation Cut-off frequency (pulse) 20 khz 20 khz 20 khz 20 khz Potentials/ electrical isolation Digital output functions - between the channels Yes; Optocoupler Yes; Relay Yes; Optocoupler Yes; Relay - between the channels, 4 1 and 6 in groups of Digital input functions - between the channels Yes Yes Yes Yes - between the channels, in groups of 2 and 4 2 and Permissible potential difference between different circuits Environmental requirements Environmental conditions 500 V DC between 24 V DC and 5 V DC For other ambient conditions: see "S7-200 Programmable Controller, System Manual" 500 V DC between 24 V DC and 5 V DC; 1500 V AC between 24 V DC and 20 V AC For other ambient conditions: see "S7-200 Programmable Controller, System Manual" 500 V DC between 24 V DC and 5 V DC For other ambient conditions: see "S7-200 Programmable Controller, System Manual" Operating temperature - vertical mounting, min. 0 C 0 C 0 C 0 C - vertical mounting, max. 45 C 45 C 45 C 45 C - horizontal mounting, min. 0 C 0 C 0 C 0 C - horizontal mounting, max. 55 C 55 C 55 C 55 C Air pressure - permissible range, min 860 hpa 860 hpa 860 hpa 860 hpa - permissible range, max 1,080 hpa 1,080 hpa 1,080 hpa 1,080 hpa Relative humidity - Operation, min. 5 % 5 % 5 % 5 % - Operation, max. 95 %; RH stressing level 2 in accordance with IEC %; RH stressing level 2 in accordance with IEC %; RH stressing level 2 in accordance with IEC Degree of protection and class of protection -IP 20 Yes Yes Yes Yes Dimensions and weight Weight, approx. 270 g 10 g 270 g 10 g Width 90 mm 90 mm 90 mm 90 mm Height 80 mm 80 mm 80 mm 80 mm Depth 62 mm 62 mm 62 mm 62 mm 500 V DC between 24 V DC and 5 V DC; 1500 V AC between 24 V DC and 20 V AC For other ambient conditions: see "S7-200 Programmable Controller, System Manual" 95 %; RH stressing level 2 in accordance with IEC /10 Siemens ST

11 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 1AD2-0XB0 1BD2-0XB0 2AD2-0XB0 2BD2-0XB0 6ES AD2-0XB0 Supply voltages Rated value - 24 V DC Yes Yes Yes - permissible range, lower limit 20.4 V 20.4 V 20.4 V (DC) - permissible range, upper limit (DC) 28.8 V 28.8 V 28.8 V V AC Yes Yes Yes - 20 V AC Yes Yes Yes - permissible range, lower limit 85 V 85 V 85 V (AC) - permissible range, upper limit 264 V 264 V 264 V (AC) - permissible frequency range, lower 47 Hz 47 Hz 47 Hz limit - permissible frequency range, 6 Hz 6 Hz 6 Hz upper limit Voltages and currents Load voltage L+ - Rated value (DC) 24 V 24 V 24 V 24 V 24 V 24 V - permissible range, lower limit 20.4 V 5 V 20.4 V 5 V 20.4 V 5 V (DC) - permissible range, upper limit (DC) 28.8 V 0 V 28.8 V 0 V 28.8 V 0 V Load voltage L1 - Rated value (AC) 100 V; 100 to 20 V AC - permissible range, lower limit (AC) - permissible range, upper limit (AC) - permissible frequency range, lower limit - permissible frequency range, upper limit 100 V; 100 to 20 V AC 5 V 5 V 5 V 250 V 250 V 250 V 47 Hz 47 Hz 47 Hz 6 Hz 6 Hz 6 Hz 6ES BD2-0XB0 100 V; 100 to 20 V AC Current consumption Inrush current, max. 12 A; at 28.8 V 20 A; at 264 V 12 A; at 28.8 V 20 A; at 264 V 10 A; at 28.8 V 20 A; at 264 V from supply voltage L+, max. from supply voltage L1, max. 700 ma; 110 to 700 ma, output current for expansion modules (5 V DC) 660 ma back-up battery - Backup time 100 h; (min. 70 h at 40 C); 200 days (typ.) with optional battery module 200 ma; 0 to 100 ma (240 V), 60 to 200 ma (120 V); output current for expansion modules (5 V DC) 600 ma 100 h; (min. 70 h at 40 C); 200 days (typ.) with optional battery module 900 ma; 120 to 900 ma, output current for expansion modules (5 V DC) 660 ma 100 h; (min. 70 h at 40 C); 200 days (typ.) with optional battery module 220 ma; 5 to 100 ma (240 V), 70 to 220 ma (120 V); output current for expansion modules (5 V DC) 600 ma 100 h; (min. 70 h at 40 C); 200 days (typ.) with optional battery module 1,050 ma; 150 to 1050 ma, output current for expansion modules (5 V DC) 1000 ma 100 h; (min. 70 h at 40 C); 200 days (typ.) with optional battery module 20 ma; 40 to 160 ma (240 V), 80 to 20 ma (120 V); output current for expansion modules (5 V DC) 1000 ma 100 h; (min. 70 h at 40 C); 200 days (typ.) with optional battery module Siemens ST /11

12 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) Memory/backup Memory - Number of memory modules (optional) 1AD2-0XB0 1; pluggable memory module, content identical to integral EEPROM, in addition, recipes, data logs and other files can be saved. 1BD2-0XB0 1; pluggable memory module, content identical to integral EEPROM, in addition, recipes, data logs and other files can be saved. 2AD2-0XB0 1; pluggable memory module, content identical to integral EEPROM, in addition, recipes, data logs and other files can be saved. 2BD2-0XB0 1; pluggable memory module, content identical to integral EEPROM, in addition, recipes, data logs and other files can be saved. 6ES AD2-0XB0 1; pluggable memory module, content identical to integral EEPROM, in addition, recipes, data logs and other files can be saved. 6ES BD2-0XB0 1; pluggable memory module, content identical to integral EEPROM, in addition, recipes, data logs and other files can be saved. Data memory and program memory - Data memory, max. 8 KByte 8 KByte 10 KByte 10 KByte 10 KByte 10 KByte - Program memory, max. 12 KByte; 8 Kbytes for active run-time edit Backup - available Yes; Program: entire program maintenancefree in integral EEPROM, programmable via CPU; data: entire DB 1 loaded from PG/PC maintenance-free in integral EEPROM, current values of DB 1 in RAM, retentive flags, timers, counters etc., maintenance free via super capacitor; optional battery 12 KByte; 8 Kbytes for active run-time edit Yes; Program: entire program maintenancefree in integral EEPROM, programmable via CPU; data: entire DB 1 loaded from PG/PC maintenance-free in integral EEPROM, current values of DB 1 in RAM, retentive flags, timers, counters etc., maintenance free via super capacitor; optional battery 16 KByte; 12 Kbytes for active run-time edit Yes; Program: entire program maintenancefree in integral EEPROM, programmable via CPU; data: entire DB 1 loaded from PG/PC maintenance-free in integral EEPROM, current values of DB 1 in RAM, retentive flags, timers, counters etc., maintenance free via super capacitor; optional battery 16 KByte; 12 Kbytes for active run-time edit Yes; Program: entire program maintenancefree in integral EEPROM, programmable via CPU; data: entire DB 1 loaded from PG/PC maintenance-free in integral EEPROM, current values of DB 1 in RAM, retentive flags, timers, counters etc., maintenance free via super capacitor; optional battery 24 KByte; 16 Kbytes with active run-time edit Yes; Program: entire program maintenancefree in integral EEPROM, programmable via CPU; data: entire DB 1 loaded from PG/PC maintenance-free in integral EEPROM, current values of DB 1 in RAM, retentive flags, timers, counters etc., maintenance free via super capacitor; optional battery 24 KByte; 16 Kbytes with active run-time edit Yes; Program: entire program maintenancefree in integral EEPROM, programmable via CPU; data: entire DB 1 loaded from PG/PC maintenance-free in integral EEPROM, current values of DB 1 in RAM, retentive flags, timers, counters etc., maintenance free via super capacitor; optional battery CPU/processing times for bit instruction, max µs 0.22 µs 0.22 µs 0.22 µs 0.22 µs 0.22 µs Timers/counters and their retentive characteristics S7 counter - Number of which retentive with battery - adjustable Yes; via super capacitor or battery Yes; via super capacitor or battery Yes; via super capacitor or battery Yes; via super capacitor or battery Yes; via super capacitor or battery Yes; via super capacitor or battery - lower limit upper limit Counting range - lower limit upper limit 2,767 2,767 2,767 2,767 2,767 2,767 /12 Siemens ST

13 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 1AD2-0XB0 1BD2-0XB0 2AD2-0XB0 2BD2-0XB0 6ES AD2-0XB0 S7 times - Number of which retentive with battery - adjustable Yes; via super capacitor or battery Yes; via super capacitor or battery Yes; via super capacitor or battery Yes; via super capacitor or battery Yes; via super capacitor or battery - upper limit Timing range - lower limit 1 ms 1 ms 1 ms 1 ms 1 ms 1 ms - upper limit 54 min; 4 times, 1 ms to 0 s 16 times, 10 ms to 5 min 26 times, 100 ms to 54 min Data areas and their retentive characteristics 54 min; 4 times, 1 ms to 0 s 16 times, 10 ms to 5 min 26 times, 100 ms to 54 min 54 min; 4 times, 1 ms to 0 s 16 times, 10 ms to 5 min 26 times, 100 ms to 54 min 54 min; 4 times, 1 ms to 0 s 16 times, 10 ms to 5 min 26 times, 100 ms to 54 min 54 min; 4 times, 1 ms to 0 s 16 times, 10 ms to 5 min 26 times, 100 ms to 54 min 6ES BD2-0XB0 Yes; via super capacitor or battery 54 min; 4 times, 1 ms to 0 s 16 times, 10 ms to 5 min 26 times, 100 ms to 54 min Flags - Number 2 Byte 2 Byte 2 Byte 2 Byte 2 Byte 2 Byte - adjustable retentivity Yes; M0.0 to M1.7 - of which retentive with battery 0 to 255, via super capacitor or battery, adjustable - of which retentive without battery 0 to 112 in EEPROM, adjustable Configuration Connectable programming devices/pcs Central units/expansion units, max. SIMATIC PG/PC, Standard PC 7 expansion modules. Only expansion modules of the S7-22x series can be used. (Because of the limited output current, the use of expansion modules may be subject to restrictions.) I/O expansions - Analog inputs/outputs, max. 5; max. 28 inputs and 7 outputs (EM) or max. 0 inputs and 14 outputs (EM) - Digital inputs/outputs, max. 168; max. 94 inputs and 74 outputs (CPU+EM) - AS interface inputs/outputs, max. 62; AS interface A/B slaves (CP 24-2) Yes; M0.0 to M1.7 0 to 255, via super capacitor or battery, adjustable 0 to 112 in EEPROM, adjustable SIMATIC PG/PC, Standard PC 7 expansion modules. Only expansion modules of the S7-22x series can be used. (Because of the limited output current, the use of expansion modules may be subject to restrictions.) 5; max. 28 inputs and 7 outputs (EM) or max. 0 inputs and 14 outputs (EM) 168; max. 94 inputs and 74 outputs (CPU+EM) 62; AS interface A/B slaves (CP 24-2) Yes; M0.0 to M1.7 0 to 255, via super capacitor or battery, adjustable 0 to 112 in EEPROM, adjustable SIMATIC PG/PC, Standard PC 7 expansion modules. Only expansion modules of the S7-22x series can be used. (Because of the limited output current, the use of expansion modules may be subject to restrictions.) 8; 2 on board inputs and one output, in addition max. 28 inputs and 7 outputs (EM) or max. 0 inputs and 14 outputs (EM) 168; max. 94 inputs and 74 outputs (CPU+EM) 62; AS interface A/B slaves (CP 24-2) Yes; M0.0 to M1.7 0 to 255, via super capacitor or battery, adjustable 0 to 112 in EEPROM, adjustable SIMATIC PG/PC, Standard PC 7 expansion modules. Only expansion modules of the S7-22x series can be used. (Because of the limited output current, the use of expansion modules may be subject to restrictions.) 8; 2 on board inputs and one output, in addition max. 28 inputs and 7 outputs (EM) or max. 0 inputs and 14 outputs (EM) 168; max. 94 inputs and 74 outputs (CPU+EM) 62; AS interface A/B slaves (CP 24-2) Yes; M0.0 to M1.7 0 to 255, via super capacitor or battery, adjustable 0 to 112 in EEPROM, adjustable SIMATIC PG/PC, Standard PC 7 expansion modules. Only expansion modules of the S7-22x series can be used. (Because of the limited output current, the use of expansion modules may be subject to restrictions.) 5; max. 28 inputs and 7 outputs (EM) or max. 0 inputs and 14 outputs (EM) 148; max. 128 inputs and 120 outputs (CPU+EM) 62; AS interface A/B slaves (CP 24-2) Yes; M0.0 to M1.7 0 to 255, via super capacitor or battery, adjustable 0 to 112 in EEPROM, adjustable SIMATIC PG/PC, Standard PC 7 expansion modules. Only expansion modules of the S7-22x series can be used. (Because of the limited output current, the use of expansion modules may be subject to restrictions.) 5; max. 28 inputs and 7 outputs (EM) or max. 0 inputs and 14 outputs (EM) 148; max. 128 inputs and 120 outputs (CPU+EM) 62; AS interface A/B slaves (CP 24-2) Siemens ST /1

14 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 1AD2-0XB0 1BD2-0XB0 2AD2-0XB0 2BD2-0XB0 6ES AD2-0XB0 Connection system Pluggable I/O terminals Yes Yes Yes Yes Yes Yes 1st interface Type of interface integrated RS 485 interface integrated RS 485 interface integrated RS 485 interface integrated RS 485 interface integrated RS 485 interface 6ES BD2-0XB0 integrated RS 485 interface Physical RS 485 RS 485 RS 485 RS 485 RS 485 RS 485 Functionality -MPI Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s - PPI Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s - Serial data Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4. 8/9.6/19.2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4. 8/9.6/19.2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4. 8/9.6/19.2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4. 8/9.6/19.2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4. 8/9.6/19.2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4. 8/9.6/19.2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter MPI - Transmission rates, max kbit/s kbit/s kbit/s kbit/s kbit/s kbit/s - Transmission rates, min kbit/s 19.2 kbit/s 19.2 kbit/s 19.2 kbit/s 19.2 kbit/s 19.2 kbit/s /14 Siemens ST

15 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 2nd interface Type of interface 1AD2-0XB0 1BD2-0XB0 2AD2-0XB0 integrated RS 485 interface 2BD2-0XB0 integrated RS 485 interface 6ES AD2-0XB0 integrated RS 485 interface 6ES BD2-0XB0 integrated RS 485 interface Physical RS 485 RS 485 RS 485 RS 485 Functionality -MPI Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s - PPI Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s - Serial data Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4. 8/9.6/19.2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4. 8/9.6/19.2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4. 8/9.6/19.2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter Yes; as MPI Slave for data exchange with MPI Masters (S7-00/S CPUs, OPs, TDs, Push Button Panels); internal S7-200 CPU/CPU communication is limited in the MPI network; rates 19.2/187.5 kbit/s Yes; with PPI protocol for programming functions, HMI functions (TD 200, OP), S7-200 internal CPU/CPU communication; rates 9.6/19.2/187.5 kbit/s Yes; as a freely programmable interface with an interrupt option for serial data with external units with ASCII ptotocol baud rates: 0./0.6/1.2/2.4/4. 8/9.6/19.2/8.4 kbit/s; at 1.2 to 8.4 kbit/s, the PC/PPI cable can be used as an RS22/RS485 converter MPI - Transmission rate, max kbit/s kbit/s kbit/s kbit/s - Transmission rate, min kbit/s 19.2 kbit/s 19.2 kbit/s 19.2 kbit/s Siemens ST /15

16 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 1AD2-0XB0 1BD2-0XB0 2AD2-0XB0 2BD2-0XB0 6ES AD2-0XB0 6ES BD2-0XB0 CPU/ programming Programming language -LAD Yes Yes Yes Yes Yes Yes -FBD Yes Yes Yes Yes Yes Yes -STL Yes Yes Yes Yes Yes Yes Instruction set Bit logic compare timer counter clock integer math floatingpoint math numeric functions, move table logic shift and rotate conversion program control interrupt and communications logic stack instructions Bit logic compare timer counter clock integer math floatingpoint math numeric functions, move table logic shift and rotate conversion program control interrupt and communications logic stack instructions Bit logic compare timer counter clock integer math floatingpoint math numeric functions, move table logic shift and rotate conversion program control interrupt and communications logic stack instructions Bit logic compare timer counter clock integer math floatingpoint math numeric functions, move table logic shift and rotate conversion program control interrupt and communications logic stack instructions Bit logic compare timer counter clock integer math floatingpoint math numeric functions, move table logic shift and rotate conversion program control interrupt and communications logic stack instructions Bit logic compare timer counter clock integer math floatingpoint math numeric functions, move table logic shift and rotate conversion program control interrupt and communications logic stack instructions User program protection/password protection Program execution Program organization Yes; -stage password protection free cycle (OB 1), interrupt-driven, time-driven (1 to 255 ms) 1 OB, 1 DB, 1 SDB subprograms with/without parameter transfer Yes; -stage password protection free cycle (OB 1), interrupt-driven, time-driven (1 to 255 ms) 1 OB, 1 DB, 1 SDB subprograms with/without parameter transfer Yes; -stage password protection free cycle (OB 1), interrupt-driven, time-driven (1 to 255 ms) 1 OB, 1 DB, 1 SDB subprograms with/without parameter transfer Yes; -stage password protection free cycle (OB 1), interrupt-driven, time-driven (1 to 255 ms) 1 OB, 1 DB, 1 SDB subprograms with/without parameter transfer Yes; -stage password protection free cycle (OB 1), interrupt-driven, time-driven (1 to 255 ms) 1 OB, 1 DB, 1 SDB subprograms with/without parameter transfer Number of sub-programs, max Digital inputs Number of digital inputs Length of cable - Length of cable shielded, max - Length of cable unshielded, max m/p reading 500 m; Standard input: 500m, fast counters: 50m 00 m; not for high-speed signals Yes; optional, per group 500 m; Standard input: 500m, fast counters: 50m 00 m; not for high-speed signals Yes; optional, per group 500 m; Standard input: 500m, fast counters: 50m 00 m; not for high-speed signals Yes; optional, per group 500 m; Standard input: 500m, fast counters: 50m 00 m; not for high-speed signals Yes; optional, per group 500 m; Standard input: 500m, fast counters: 50m 00 m; not for high-speed signals Yes; optional, per group Input voltage - Rated value, DC 24 V 24 V 24 V 24 V 24 V 24 V - for signal "0" 0 to 5 V 0 to 5 V 0 to 5 V; 0 to 1V (I0. to I0.5) - for signal "1" min. 15 V min. 15 V min. 15 V; at least 4V (I0. to I0.5) Input current - for 1 signal, typical 2.5 ma 2.5 ma 2.5 ma; 8 ma for I0. to I0.5 0 to 5 V0 to 1V (I0. to I0.5) min. 15 V at least 4V (I0. to I0.5) 2.5 ma; 8 ma for I0. to I0.5 0 to 5 V 0 to 5 V min. 15 V Yes; -stage password protection free cycle (OB 1), interrupt-driven, time-driven (1 to 255 ms) 1 OB, 1 DB, 1 SDB subprograms with/without parameter transfer 500 m; Standard input: 500m, fast counters: 50m 00 m; not for high-speed signals Yes; optional, per group min. 15 V 2.5 ma 2.5 ma /16 Siemens ST

17 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 1AD2-0XB0 1BD2-0XB0 2AD2-0XB0 2BD2-0XB0 6ES AD2-0XB0 6ES BD2-0XB0 Input delay (at rated value of the input voltage) For standard inputs - Parameterizable Yes; all Yes; all Yes; all Yes; all Yes; all Yes; all - at 0 after 1, min. 0.2 ms 0.2 ms 0.2 ms 0.2 ms 0.2 ms 0.2 ms - at 0 after 1, max ms 12.8 ms 12.8 ms 12.8 ms 12.8 ms 12.8 ms for alarm inputs - parameterizable Yes; I0.0 to I0. Yes; I0.0 to I0. Yes; I0.0 to I0. Yes; I0.0 to I0. Yes; I0.0 to I0. Yes; I0.0 to I0. for counters/technological functions - parameterizable Yes; (E0.0 to E1.5) 0 khz Yes; (E0.0 to E1.5) 0 khz Yes; (E0.0 to E1.5) up to 200 khz Yes; (E0.0 to E1.5) up to 200 khz Yes; (E0.0 to E1.5) 0 khz Yes; (E0.0 to E1.5) 0 khz Digital outputs Number of digital outputs 10; Transistor 10; Relay 10; Transistor 10; Relay 16; Transistor 16; Relay Length of cable shielded, max. 500 m 500 m 500 m 500 m 500 m 500 m Length of cable unshielded, max. 150 m 150 m 150 m 150 m 150 m 150 m Short-circuit protection of the output Limitation of voltage induced on circuit interruption to No; provided externally No; provided externally No; provided externally No; provided externally 1 W 1 W 1 W No; provided externally Switching capacity of the outputs - at resistive load, max A 2 A 0.75 A 2 A 0.75 A 2 A - at lamp load, max. 5 W 200 W; 0 W DC, 200 W AC 5 W 200 W; 0 W DC, 200 W AC No; provided externally 5 W 200 W; 0 W DC, 200 W AC Output voltage - for 1 signal 20 V DC L+/L1 L+ minus 0.4V L+/L1 20 V DC L+/L1 (5V/20,4V for A0.0 to A0.4; 20,4V A0.5 to A1.1) Output current - for 1 signal rated value 750 ma 2 A 750 ma 2 A 750 ma 2 A - for 0 signal residual current, max. 10 µa 0 ma 10 µa 0 ma 10 µa 0 ma Output delay at resistive load - "0" after "1", max. 15 µs; of the standard outputs, max. (A0.2 to A1.1) 2 µs; of the pulse outputs, max. (A0.0 to A0.1) 2 µs - "1" after "0", max. 10 µs; of the standard outputs, max. (A0.2 to A1.1) 10 µs; of the pulse outputs, max. (A0.0 to A0.1) 10 µs 10 ms; all outputs 10 ms; all outputs 15 µs; of the standard outputs, max. (A0.2 to A1.1) 15 µs; of the pulse outputs, max. (A0.0 to A0.1) 0.5 µs 10 µs; of the standard outputs, max. (A0.2 to A1.1) 10 µs; of the pulse outputs, max. (A0.0 to A0.1) 1.5 µs 10 ms; all outputs 10 ms; all outputs 15 µs; of the standard outputs, max. (A0.2 to A1.1) 2 µs; of the pulse outputs, max. (A0.0 to A0.1) 2 µs 10 µs; of the standard outputs, max. (A0.2 to A1.1) 10 µs; of the pulse outputs, max. (A0.0 to A0.1) 10 µs Parallel switching of 2 outputs - to increase power Yes No Yes No Yes No Switching frequency - of pulse outputs, at resistive load, max. 20 khz; A0.0 to A0.1 1 Hz 100 khz; A0.0 to A0.1 1 Hz 20 khz; A0.0 to A0.1 Summation current of the outputs (per group) - up to 40 C, max. 6 A 10 A.75 A 10 A 6 A 10 A - horizontal installation, up to 55 C, max. 6 A 10 A.75 A 10 A 6 A 10 A 10 ms; all outputs 10 ms; all outputs 1 khz Siemens ST /17

18 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 1AD2-0XB0 1BD2-0XB0 Relay outputs Number of operating cycles 10,000,000; mechanical 10 million, at rated load voltage 100,000 Analog inputs Number of analog potentiometers 2; Analog potentiometer; resolution 8 bits Sensor supply 24 V - sensor supply - 24 V Yes; permissible range: 15.4 to 28.8 V - Short-circuit protection Yes; electronic at 280 ma 2; Analog potentiometer; resolution 8 bits Yes; permissible range: 20.4 to 28.8 V Yes; electronic at 280 ma 2AD2-0XB0 2; Analog potentiometer; resolution 8 bits Yes; permissible range: 15.4 to 28.8 V Yes; electronic at 280 ma 2BD2-0XB0 10,000,000; mechanical 10 million, at rated load voltage 100,000 2; Analog potentiometer; resolution 8 bits Yes; permissible range: 20.4 to 28.8 V Yes; electronic at 280 ma 6ES AD2-0XB0 2; Analog potentiometer; resolution 8 bits Yes; permissible range: 15.4 to 28.8 V Yes; electronic at 400 ma 6ES BD2-0XB0 10,000,000; mechanical 10 million, at rated load voltage 100,000 2; Analog potentiometer; resolution 8 bits Yes; permissible range: 20.4 to 28.8 V Yes; electronic at 400mA - Output current, max. 280 ma 280 ma 280 ma 280 ma 400 ma 400 ma Sensor Connectable encoders - 2-wire BEROS Yes Yes Yes Yes Yes Yes - permissible closed-circuit current (2-wire BEROS), max. 1 ma 1 ma 1 ma 1 ma 1 ma 1 ma Integral functions Number of counters 6; fast counters (each 0 khz), 2 bits (incl. sign), usable as up/down counter or for connecting 4 incremental encoders with 2 pulse trains offset by 90 (max. 20 khz (A/B counter)); parameterizable enable and reset input; interrupt options (incl. Call up a subprogram with any content) when the setpoint value is reached; change of count direction etc. 6; fast counters (each 0 khz), 2 bits (incl. sign), usable as up/down counter or for connecting 4 incremental encoders with 2 pulse trains offset by 90 (max. 20 khz (A/B counter)); parameterizable enable and reset input; interrupt options (incl. Call up a subprogram with any content) when the setpoint value is reached; change of count direction etc. 6; fast counters (2 to 200 khz and 4 to 0 khz), 2 bits (incl. sign), usable as up/down counter or for connecting 2 incremental encoders with 2 pulse trains offset by 90 (max. 1 to 100 khz and to 20 khz (A/B counter)); parameterizable enable and reset input; interrupt options (incl. Call up a subprogram with any content) when the setpoint value is reached; change of count direction etc. 6; fast counters (2 to 200 khz and 4 to 0 khz), 2 bits (incl. sign), usable as up/down counter or for connecting 2 incremental encoders with 2 pulse trains offset by 90 (max. 1 to 100 khz and to 20 khz (A/B counter)); parameterizable enable and reset input; interrupt options (incl. Call up a subprogram with any content) when the setpoint value is reached; change of count direction etc. 6; fast counters (each 0 khz), 2 bits (incl. sign), usable as up/down counter or for connecting 4 incremental encoders with 2 pulse trains offset by 90 (max. 20 khz (A/B counter)); parameterizable enable and reset input; interrupt options (incl. Call up a subprogram with any content) when the setpoint value is reached; change of count direction etc. 6; fast counters (each 0 khz), 2 bits (incl. sign), usable as up/down counter or for connecting 4 incremental encoders with 2 pulse trains offset by 90 (max. 20 khz (A/B counter)); parameterizable enable and reset input; interrupt options (incl. Call up a subprogram with any content) when the setpoint value is reached; change of count direction etc. Count frequency (counters) max. 0 khz 0 khz 200 khz 200 khz 0 khz 0 khz Number of alarm inputs 4; 4 rising edges and/or 4 falling edges 4; 4 rising edges and/or 4 falling edges 4; 4 rising edges and/or 4 falling edges 4; 4 rising edges and/or 4 falling edges 4; 4 rising edges and/or 4 falling edges 4; 4 rising edges and/or 4 falling edges Number of pulse outputs 2; fast outputs, 20 khz, with interrupt option; pulse width and frequency modulation 2; fast outputs, 20 khz, with interrupt option; pulse width and frequency modulation 2; fast outputs, 20 khz, with interrupt option; pulse width and frequency modulation 2; fast outputs, 20 khz, with interrupt option; pulse width and frequency modulation 2; fast outputs, 20 khz, with interrupt option; pulse width and frequency modulation Cut-off frequency (pulse) 20 khz 20 khz 20 khz 20 khz 20 khz 20 khz 2; fast outputs, 20 khz, with interrupt option; pulse width and frequency modulation /18 Siemens ST

19 Central processing units CPU 221, 222, 224, 224 XP, 226 Technical specifications (continued) 1AD2-0XB0 1BD2-0XB0 2AD2-0XB0 2BD2-0XB0 6ES AD2-0XB0 6ES BD2-0XB0 Potentials/ electrical isolation Digital output functions - between the channels Yes; Yes; Relay Yes; Yes; Relay Yes; Yes; Relay Optocoupler Optocoupler Optocoupler - between the channels, 5, and 4 5, and 4 8 and 8 4, 5 and 7 in groups of Digital input functions - between the channels Yes Yes Yes Yes Yes Yes; Optocoupler - between the channels, 6 and 8 6 and 8 6 and 8 6 and 8 1 and 11 1 and 11 in groups of Permissible potential difference between different circuits 500 V DC between 24 V DC and 5 V DC 500 V DC between 24 V DC and 5 V DC 500 V DC between 24 V DC and 5 V DC Environmental requirements Environmental conditions For other ambient conditions: see "S7-200 Programmable Controller, System Manual" 500 V DC between 24 V DC and 5 V DC; 1500 V AC between 24 V DC and 20 V AC For other ambient conditions: see "S7-200 Programmable Controller, System Manual" For other ambient conditions: see "S7-200 Programmable Controller, System Manual" 500 V DC between 24 V DC and 5 V DC; 1500 V AC between 24 V DC and 20 V AC For other ambient conditions: see "S7-200 Programmable Controller, System Manual" For other ambient conditions: see "S7-200 Programmable Controller, System Manual" 500 V DC between 24 V DC and 5 V DC; 1500 V AC between 24 V DC and 20 V AC For other ambient conditions: see "S7-200 Programmable Controller, System Manual" Operating temperature - vertical mounting, min. 0 C 0 C 0 C 0 C 0 C 0 C - vertical mounting, max. 45 C 45 C 45 C 45 C 45 C 45 C - horizontal mounting, min. 0 C 0 C 0 C 0 C 0 C 0 C - horizontal mounting, max. 55 C 55 C 55 C 55 C 55 C 55 C Air pressure - permissible range, min 860 hpa 860 hpa 860 hpa 860 hpa 860 hpa 860 hpa - permissible range, max 1,080 hpa 1,080 hpa 1,080 hpa 1,080 hpa 1,080 hpa 1,080 hpa Relative humidity - Operation, min. 5 % 5 % 5 % 5 % 5 % 5 % - Operation, max. 95 %; RH stressing level 2 in accordance with IEC Degree of protection and class of protection 95 %; RH stressing level 2 in accordance with IEC %; RH stressing level 2 in accordance with IEC %; RH stressing level 2 in accordance with IEC %; RH stressing level 2 in accordance with IEC %; RH stressing level 2 in accordance with IEC IP 20 Yes Yes Yes Yes Yes Yes Dimensions and weight Weight, approx. 60 g 410 g 90 g 440 g 550 g 660 g Width mm mm 140 mm 140 mm 196 mm 196 mm Height 80 mm 80 mm 80 mm 80 mm 80 mm 80 mm Depth 62 mm 62 mm 62 mm 62 mm 62 mm 62 mm Siemens ST /19

20 Central processing units CPU 221, 222, 224, 224 XP, 226 Ordering Data Order No. Order No. CPU 221 Compact CPU, 4 KB RAM, 24 V DC supply voltage, 6 DI/4 DO integrated A) Compact CPU, 4 KB RAM, 100 to 20 V AC supply voltage, 6 DI/4 DO integrated, relay outputs A) CPU 222 Compact CPU, expandable, 4 KB RAM, 24 V DC supply voltage, 8 DI/6 DO integrated A) Compact CPU, expandable, 4 KB RAM, V AC, 8 DI/6 DO integrated, relay outputs A) CPU 224 Compact CPU, expandable, 8/12 KB RAM for program, 8 KB RAM for data, 24 V DC supply voltage, 14 DI/10 DO, integrated A) Compact CPU, expandable, 8/12 KB RAM for program, 8 KB RAM for data, V AC supply voltage, 14 DI/10 DO, integrated, relay outputs A) CPU 224 XP Compact CPU, expandable, 12/16 KB RAM for program, 10 KB RAM for data, 24 V DC supply voltage, 14 DI/10 DO/ 2 AI/1 AO integrated A) Compact CPU, expandable, 12/16 KB RAM for program, 10 KB RAM for data, V AC supply voltage, 14 DI/10 DO (relay outputs) 2 AI/1 AO integrated A) CPU 226 Compact CPU, expandable, 16/24 KB RAM for program, 10 KB RAM for data, 24 V DC supply voltage, 24 DI/16 DO, integrated A) Compact CPU, expandable, 16/24 KB RAM for program, 10 KB RAM for data, V AC supply voltage, 24 DI/16 DO, integrated, relay outputs A) 6ES AA2-0XB0 6ES BA2-0XB0 6ES AB2-0XB0 6ES BB2-0XB0 1AD2-0XB0 1BD2-0XB0 2AD2-0XB0 2BD2-0XB0 6ES AD2-0XB0 6ES BD2-0XB0 S7-200 True Power Box Complete package consisting of CPU 222, STEP 7 Micro/WIN V, combined clock and battery modules, intelligent RS 22/PPI multimaster cable, manual; delivered in a practical box German C) English C) French C) Spanish C) Italian C) Memory module MC 291, EEPROM A) for CPU 221/222/224/224 XP/226 Memory module MC 291, EEPROM for CPU 221/222/224/224 XP/226 6ES AA20-0AA2 6ES AA20-0BA2 6ES AA20-0CA2 6ES AA20-0DA2 6ES AA20-0EA2 6ES GE20-0XA0 64 KB A) 6ES GF2-0XA0 256 KB A) 6ES GH2-0XA0 Grounding terminal 6ES MA11 10 items Front flap set A) 6ES7 291-AX20-0XA0 contains different covering flaps for CPU and EM; Spare part SIM 274 simulator (optional) with 8 connection terminals for 6ES XF00-0XA0 CPU 221/222 A) with 14 connection terminals for 6ES XH00-0XA0 CPU 224/224 XP A) with 24 connection terminals for 6ES XK00-0XA0 CPU 226 A) Terminal block for field wiring (optional) for CPU 221/222, 10 items A) 6ES AA00-0XA0 for CPU 224, 10 items A) Plug-in terminal block (spare part) with 12 connections (for CPU 22x) A) with 18 connections (for CPU 224) A) with 14 connection terminals (for CPU 226/226 XM) A) Intelligent RS 22/PPI multimaster cable A) for connecting devices with an RS 22 interface to the SIMATIC S7-200 or PPI network; master in the multimaster PPI network Intelligent USB/PPI multimaster cable A) for connecting devices with an USB interface to the SIMATIC S7-200 or PPI network; master in the multimaster PPI network MPI cable 5 m for connecting the S7-200 to the MPI 6ES BA00-0XA0 6ES AE20-0AA0 6ES AG20-0AA0 6ES AF20-0AA0 6ES7 901-CB0-0XA0 6ES7 901-DB0-0XA0 6ES BF00-0AA0 A) Subject to export regulations: AL: N and ECCN: EAR99H C) Subject to export regulations: AL: N and ECCN: EAR99T /20 Siemens ST

21 Central processing units CPU 221, 222, 224, 224 XP, 226 Ordering Data Order No. Order No. Backplane bus expansion cable A) for connecting the two equipment tiers in a two-tier configuration, for CUP 222/224/224 XP/226 Optional battery module A) Optional combined clock and battery module A) for CPU 221/222 only S7-200 programmable controller, system manual for CPU 221/222/224/224 XP/226 and STEP 7-Micro/Win V4 German English French Spanish Italian Chinese SIMATIC Manual Collection B) Electronic manuals on CD-ROM, 5 languages: S7-200/00/400, C7, LOGO!, SIMATIC DP, PC, PG, STEP 7, Engineering Software, Runtime Software, PCS 7, SIMATIC HMI, SIMATIC NET SIMATIC Manual Collection update service for 1 year B) Up-to-date Manual Collection CD as well as the three subsequent updates 6ES AA20-0XA0 6ES BA20-0XA0 6ES AA2-0XA0 6ES FA24-8AH0 6ES FA24-8BH0 6ES FA24-8CH0 6ES FA24-8DH0 6ES FA24-8EH0 6ES FA24-8FH0 6ES XC01-8YE0 6ES XC01-8YE2 STEP 7 Micro/WIN V4 programming software Target system: All CPUs of the SIMATIC S7-200 range Requirements: Windows 2000/XP on PG or PC delivery type: English, German, French, Spanish, Italian, Chinese; with online documentation Single license B) 1) B) Upgrade single license PROFIBUS bus connector IP20 with 90 cable feeder without PG connection with PG connection PROFIBUS bus connector IP20 with 5 cable feeder without PG connection with PG connection PROFIBUS FC Standard Cable for connecting to PPI; standard type with special design for quick mounting, 2-wire, shielded, sold by the meter, up to 1000m, minimum order 20 m Repeater RS 485 for PROFIBUS 6ES CC0-0YX0 6ES CC0-0YX 6ES BA12-0XA0 6ES BB12-0XA0 6ES BA41-0XA0 6ES BB41-0XA0 6XV1 80-0EH10 6ES AA01-0XA0 1) Upgrade for all previous STEP 7 Micro/WIN and STEP 7 Micro/DOS versions A) Subject to export regulations: AL: N and ECCN: EAR99H B) Subject to export regulations: AL: N and ECCN: EAR99S Siemens ST /21

22 SIMATIC S7-200 SIPLUS central processing units SIPLUS central processing units Overview The SIPLUS S7-200 CPUs for us e in the harshest environmental conditions With extended temperature range from -25 to +70 C Suitable for extraordinary medi al load (pollution gas atmosphere) Occasional short-term conden sation and increased mechanical loading permissible With the proven PLC te chnology of the S7-200 Convenient handling, programmi ng, maintenance and service The alternative to expe nsive custom solutions More Information you can find at: /22 Siemens ST

23 Overview SIMATIC S7-200 Digital modules Digital modules Digital inputs/outputs to suppl ement the onboard I/Os of the CPUs For flexible adaptation of PLC to respective task For subsequent upgrading of th e system with additional inputs Ordering Data Technical specifications EM 221 6ES BH22-0XA0 6ES BF22-0XA0 6ES EF22-0XA0 Current consumption from backplane bus 5 V DC, max. 70 ma 0 ma 0 ma Power dissipation, typical W 2 W W Connection system Pluggable I/O terminals Yes Yes Yes Digital inputs Number of digital inputs Length of cable - Length of cable shielded, max 500 m 500 m 500 m - Length of cable unshielded, max 00 m 00 m 00 m m/p reading Yes Yes Input characteristic to comply with IEC 111, Type 1 Yes Input voltage - Rated value, AC 20 V; 220/20 V AC (47 to 6 Hz) - Rated value, DC 24 V 24 V - for signal "0" 0 to 5 V 0 to 5 V to 20 V AC - for signal "1" 15 to 0 V 15 to 0 V 79 V AC ( at 2.5 ma min.) Input current - for 1 signal, typical 4 ma 4 ma 2.5 ma Input delay (at rated value of the input voltage) For standard inputs - at 0 after 1, max. 4.5 ms 4.5 ms 15 ms Sensor Connectable encoders - 2-wire BEROS Yes Yes Yes - permissible closed-circuit 1 ma 1 ma 1 ma current (2-wire BEROS), max. Potentials/ electrical isolation Digital input functions - Electrical isolation, Yes; Optocoupler Yes; Optocoupler Yes; Optocoupler digital input functions - between the channels, 4 4 1; (8 groups) in groups of Dimensions and weight Weight, approx. 160 g 150 g 160 g Width 71.2 mm 46 mm 71.2 mm Height 80 mm 80 mm 80 mm Depth 62 mm 62 mm 62 mm Yes Siemens ST /2

24 Digital modules Digital modules Technical specifications EM 222 6ES BD22-0XA0 Voltages and currents Load voltage L+ - Rated value (DC) 24 V 24 V - permissible range, 20.4 V 20.4 V lower limit (DC) - permissible range, upper limit (DC) 28.8 V 28.8 V Current consumption Digital outputs from backplane bus 5 V DC, max. 40 ma 50 ma Power dissipation, typical W 2 W Connection system Pluggable I/O terminals Yes Yes Digital outputs Number of digital outputs 4 8 Length of cable shielded, max. 500 m 500 m Length of cable unshielded, max. 150 m 150 m Short-circuit protection of the output Limitation of voltage induced on circuit interruption to No; provided externally (see manual package "Installing an S7-200") L+ (-48 V) L+ (-48 V) 6ES BF22-0XA0 Output voltage - for 1 signal 20 V DC 20 V Output current - for 1 signal permissible range 5 A 750 ma for 0 to 55 C, max. - for 0 signal residual current, max. 0 µa 10 µa Parallel switching of 2 outputs - to increase power Yes Summation current of the outputs (per group) - up to 40 C, max. 20 A A - horizontal installation, 20 A A up to 55 C, max. - Maximum current 5 A A per wire/group Relay outputs Switching capacity of the contacts - at inductive load, max. 5 A 0.75 A - at lamp load, max. 50 W 5 W - at resistive load, max. 5 A 0.75 A Potentials/ electrical isolation Digital output functions - Electrical isolation, Yes; Optocoupler Yes; Optocoupler digital output functions - between the channels, 1; 4 groups 4 in groups of Dimensions and weight Weight, approx. 120 g 150 g Width 45 mm 45 mm Height 80 mm 80 mm Depth 62 mm 62 mm No; provided externally (see manual package "Installing an S7-200") /24 Siemens ST

25 Digital modules Digital modules Technical specifications (continued) 6ES HD22-0XA0 6ES HF22-0XA0 6ES EF22-0XA0 Voltages and currents Load voltage L+ - Rated value (DC) 24 V 24 V - permissible range, 12 V 5 V lower limit (DC) - permissible range, upper limit (DC) 0 V 0 V Load voltage L1 - Rated value (AC) 24 V; 24 to 20 V AC 24 V; 24 to 20 V AC 20 V; 220/20 V AC - permissible range, 12 V 5 V 65 V lower limit (AC) - permissible range, 250 V 250 V 264 V upper limit (AC) - permissible frequency range, 47 Hz 47 Hz lower limit - permissible frequency range, upper limit 6 Hz 6 Hz Current consumption Digital outputs - from load voltage L+, max. 80 ma; 20 ma per switched output 72 ma; 9 ma per switched output from backplane bus 5 V DC, max. 0 ma 40 ma 110 ma Power dissipation, typical 4 W 2 W 4 W Connection system Pluggable I/O terminals Yes Yes Yes Digital outputs Number of digital outputs 4; Relay 8; Relay 8 Length of cable shielded, max. 500 m 500 m 500 m Length of cable unshielded, max. 150 m 150 m 150 m Short-circuit protection of the output Limitation of voltage induced on circuit interruption to No; provided externally (see manual package "Installing an S7-200") provided externally (see manual package "Installing an S7-200") No; provided externally (see manual package "Installing an S7-200") provided externally (see manual package "Installing an S7-200") No; provided externally (see manual package "Installing an S7-200") provided externally (see manual package "Installing an S7-200") Output voltage - for 1 signal L1 (-0.9 V) Output current - for 1 signal permissible range 10 A 2 A 500 ma; AC for 0 to 55 C, max. - for 1 signal minimum load 50 ma current - for 0 signal residual current, max. 0 ma 0 ma 1.8 ma; at 264 V AC Summation current of the outputs (per group) - up to 40 C, max. 40 ma 8 A 0.5 A - horizontal installation, 20 ma 8 A 0.5 A up to 55 C, max. - Maximum current per wire/group 10 A 8 A 0.5 A Relay outputs Number of operating cycles 0,000,000; mechanical 0 million, at rated load voltage 0,000 10,000,000; mechanical 10 million, at rated load voltage 100,000 Switching capacity of the contacts - at inductive load, max. A; 2 A (DC), A (AC) 2 A 0.5 A - at lamp load, max. 1,000 W; 100/1000 W (DC/AC) 200 W; 0/200 W (DC/AC) 60 W - at resistive load, max. 10 A 2 A 0.5 A Siemens ST /25

26 Digital modules Digital modules Technical specifications (continued) Potentials/ electrical isolation Digital output functions - Electrical isolation, digital output functions - between the channels, in groups of 6ES HD22-0XA0 6ES HF22-0XA0 6ES EF22-0XA0 Yes; Relay Yes; Relay Yes; Optocoupler 1; 4 groups 4 1; 8 groups Dimensions and weight Weight, approx. 150 g 170 g 170 g Width 45 mm 45 mm 71.2 mm Height 80 mm 80 mm 80 mm Depth 62 mm 62 mm 62 mm Technical specifications EM 22 Voltages and currents 6ES7 22-1BF22-0XA0 6ES7 22-1BH22-0XA0 6ES7 22-1BL22-0XA0 Load voltage L+ - Rated value (DC) 24 V 24 V 24 V - permissible range, 20.4 V 20.4 V 20.4 V lower limit (DC) - permissible range, upper limit (DC) 28.8 V 28.8 V 28.8 V Current consumption from backplane bus 5 V DC, max. 40 ma 80 ma 160 ma Power dissipation, typical 2 W W 6 W Connection system Pluggable I/O terminals Yes Yes Yes Digital inputs Number of digital inputs Input voltage - Rated value, DC 24 V 24 V 24 V - for signal "0" 0 to 5 V 0 to 5 V 0 to 5 V - for signal "1" 15 to 0 V DC 15 to 0 V DC 15 to 0 V DC Input current - for 1 signal, typical 4 ma 4 ma 4 ma Input delay (at rated value of the input voltage) For standard inputs - at 0 after 1, max. 4.5 ms 4.5 ms 4.5 ms Digital outputs Number of digital outputs Length of cable shielded, max. 500 m 500 m 500 m Length of cable unshielded, max. 150 m 150 m 150 m Short-circuit protection No; provided externally No; provided externally No; provided externally of the output Limitation of voltage induced L+ (-48 V) L+ (-48 V) L+ (-48 V) on circuit interruption to Output voltage - for 0 signal (DC), max. 0.1 V 0.1 V 0.1 V - for 1 signal 20 V 20 V 20 V Output current - for 1 signal rated value 750 ma 750 ma 750 ma Summation current of the outputs (per group) - Maximum current per wire/group A A A; //6 /26 Siemens ST

27 Digital modules Digital modules Technical specifications (continued) 6ES7 22-1BF22-0XA0 6ES7 22-1BH22-0XA0 6ES7 22-1BL22-0XA0 Relay outputs Switching capacity of the contacts - at inductive load, max A; per output 0.75 A; per output 0.75 A; per output - at lamp load, max. 5 W 5 W 5 W - at resistive load, max A; per output 0.75 A; per output 0.75 A; per output Sensor Connectable encoders - 2-wire BEROS Yes Yes Yes - permissible closed-circuit 1 ma 1 ma 1 ma current (2-wire BEROS), max. Insulation Insulation tested with 500 V AC 500 V AC 500 V AC Potentials/ electrical isolation Digital output functions - Electrical isolation, Yes; Optocoupler Yes; Optocoupler Yes; Optocoupler digital output functions - between the channels, 4 4 4; 4 / 4 / 8 in groups of Digital input functions - Electrical isolation, Yes; Optocoupler Yes; Optocoupler Yes; Optocoupler digital input functions - between the channels, in groups of Dimensions and weight Weight, approx. 160 g 200 g 60 g Width 46 mm 71.2 mm 17.5 mm Height 80 mm 80 mm 80 mm Depth 62 mm 62 mm 62 mm 6ES7 22-1HF22-0XA0 6ES7 22-1PH22-0XA0 6ES7 22-1PL22-0XA0 Voltages and currents Load voltage L+ - Rated value (DC) 24 V 24 V 24 V - permissible range, 5 V 5 V 5 V lower limit (DC) - permissible range, 0 V 0 V 0 V upper limit (DC) Load voltage L1 - Rated value (AC) 20 V; 24 to 20 V AC 20 V; 24 to 20 V AC 20 V; 24 to 20 V AC - permissible range, 5 V 5 V 5 V lower limit (AC) - permissible range, 250 V 250 V 250 V upper limit (AC) Current consumption from backplane bus 5 V DC, max. 40 ma 80 ma 150 ma from coil current, max. 9 ma; per output for signal "1" 9 ma; per output for signal "1" 9 ma; per output for signal "1" from sensor current or ext. power supply (24 V DC), max. 72 ma 72 ma 72 ma Power dissipation, typical 2 W W 6 W Connection system Pluggable I/O terminals Yes Yes Yes Siemens ST /27

28 Digital modules Digital modules Technical specifications (continued) 6ES7 22-1HF22-0XA0 6ES7 22-1PH22-0XA0 6ES7 22-1PL22-0XA0 Digital inputs Number of digital inputs Input voltage - Rated value, DC 24 V 24 V 24 V - for signal "0" 0 to 5 V 0 to 5 V 0 to 5 V - for signal "1" 15 to 0 V DC 15 to 0 V DC 15 to 0 V DC Input current - for 1 signal, typical 4 ma 4 ma 4 ma Input delay (at rated value of the input voltage) For standard inputs - at 0 after 1, max. 4.5 ms 4.5 ms 4.5 ms Digital outputs Number of digital outputs 4; Relay 8; Relay 16; Relay Length of cable shielded, max. 500 m 500 m 500 m Length of cable unshielded, max. 150 m 150 m 150 m Short-circuit protection No; provided externally No; provided externally No; provided externally of the output Output voltage - for 0 signal (DC), max. 0.1 V; with 10 kohm load 0.1 V; with 10 kohm load 0.1 V; with 10 kohm load - for 1 signal L+/L1 L+/L1 L+/L1 Output current - for 1 signal rated value 2,000 ma 2,000 ma 2,000 ma Summation current of the outputs (per group) - Maximum current per wire/group 8 A 8 A 8 A Relay outputs Number of operating cycles 10,000,000; mechanical: 10 million, at rated load voltage: ,000,000; mechanical: 10 million, at rated load voltage: ,000,000; mechanical: 10 million, at rated load voltage: Switching capacity of the contacts - at inductive load, max A; per output 0.75 A; per output 0.75 A; per output - at lamp load, max. 200 W; 0/200 W (DC/AC) 200 W; 0/200 W (DC/AC) 200 W; 0/200 W (DC/AC) - at resistive load, max A; per output 0.75 A; per output 0.75 A; per output Sensor Connectable encoders - 2-wire BEROS Yes Yes Yes - permissible closed-circuit 1 ma 1 ma 1 ma current (2-wire BEROS), max. Insulation Insulation tested with 500 V AC 500 V AC 500 V AC Potentials/ electrical isolation Digital output functions - Electrical isolation, Yes; Relay Yes; Relay Yes; Relay digital output functions - between the channels, in groups of Digital input functions - Electrical isolation, Yes; Optocoupler Yes; Optocoupler Yes; Optocoupler digital input functions - between the channels, in groups of Dimensions and weight Weight, approx. 160 g 00 g 400 g Width 46 mm 71.2 mm 17.5 mm Height 80 mm 80 mm 80 mm Depth 62 mm 62 mm 62 mm /28 Siemens ST

29 Digital modules Digital modules Ordering Data Order No. Order No. Digital input module EM 221 Front flap set A) 6ES7 291-AX20-0XA0 For CPU 221/222/224/224 XP/226 8 inputs, 24 V DC, 6ES BF22-0XA0 galvanically isolated, source/sink switching A) 16 inputs, 24 V DC, 6ES BH22-0XA0 galvanically isolated, source/sink switching A) 8 inputs, 120/20 V AC, 6ES EF22-0XA0 galvanically isolated, source/sink switching A) Digital output module EM 222 For CPU 221/222/224/224 XP/226 4 outputs, 24 V DC; 5 A, 6ES BD22-0XA0 galvanically isolated A) 8 outputs, 24 V DC; 0.75 A, 6ES BF22-0XA0 galvanically isolated A) 4 outputs, 24 V DC/24 V AC up 6ES HD22-0XA0 to 20 V; 10 A, galvanically isolated, relay outputs A) 8 outputs, 24 V DC/24 V AC up 6ES HF22-0XA0 to 20 V; 2 A, galvanically isolated, relay outputs A) 8 outputs, AC 12 0/20 V; 0.5 A, 6ES EF22-0XA0 galvanically isolated A) Digital input/output module EM 22 For CPU 221/222/224/224 XP/226 4 inputs 24 V DC, 6ES7 22-1BF22-0XA0 4 outputs 24 V DC; 0.75 A, galvanically isolated A) 8 inputs 24 V DC, 6ES7 22-1BH22-0XA0 8 outputs 24 V DC; 0.75 A, galvanically isolated A) 16 inputs 24 V DC, 6ES7 22-1BL22-0XA0 16 outputs 24 V DC; 0.75 A, galvanically isolated A) 4 inputs 24 V DC, 6ES7 22-1HF22-0XA0 4 outputs, relay A) 8 inputs 24 V DC, 6ES7 22-1PH22-0XA0 8 outputs, relay A) 16 inputs 24 V DC, 6ES7 22-1PL22-0XA0 16 outputs, relay A) contains different covering flaps for CPU and EM; Spare part Plug-in terminal block (spare part) with 7 connection terminals (for EM 221/222) A) with 12 connection terminals (for EM 22) A) SIM 274 simulator (optional) A) with 8 connection terminals for EM 221 and EM 22 S7-200 programmable controller, system manual for CPU 221/222/224/224 XP/226 and STEP 7-Micro/Win V4 German English French Spanish Italian Chinese 6ES AD20-0AA0 6ES AE20-0AA0 6ES XF00-0XA0 6ES FA24-8AH0 6ES FA24-8BH0 6ES FA24-8CH0 6ES FA24-8DH0 6ES FA24-8EH0 6ES FA24-8FH0 A) Subject to export regulations: AL: N and ECCN: EAR99H Siemens ST /29

30 SIPLUS digital modules SIPLUS digital modules Overview Technical specifications 6AG BF22-2XB0 6AG BH22-2XA0 6AG BF22-2XB0 see 6ES BF22-0XA0 see 6ES BH22-0XA0 see 6ES BF22-0XA0 6AG HF22-2XB0 see 6ES HF22-0XA0 6AG1 22-1BF22-2XB0 see 6ES7 22-1BF22-0XA0 6AG1 22-1BH22-2XB0 see 6ES7 22-1BH22-0XA0 6AG1 22-1BL22-2XB0 see 6ES7 22-1BL22-0XA0 6AG1 22-1HF22-2XB0 see 6ES7 22-1HF22-0XA0 6AG1 22-1PH22-2XB0 see 6ES7 22-1PH22-0XA0 6AG1 22-1PL22-2XB0 see 6ES7 22-1PL22-0XA0 Digital inputs/outputs to supp lement the integral I/Os of the CPUs For flexible adaptation of the controller to the task For subsequent upgrading of the system with additional inputs and outputs These modules are designed for an ambient range of 25 C to + 70 C, condensation permissible extraordinary medial load (for example by chloric and sulphuric atmospheres) Ordering Data SIPLUS EM 221 digital input module (extended temperature range) for CPU 222/224/224 XP/226 Order No. 8 inputs, 24 V DC, 6AG BF22-2XB0 electrically isolated, P-M switching A) 16 inputs, 24 V DC, 6AG BH22-2XA0 electrically isolated, P-M switching A) SIPLUS EM 222 digital output module (extended temperature range) for CPU 222/224/224 XP/226 8 outputs, 24 V DC; 0.75 A, 6AG BF22-2XB0 electrically isolated A) 8 outputs, 24 V DC / 24 to 20 V 6AG HF22-2XB0 AC; 2 A, electrically isolated, relay outputs A) EM 22 digital input/output module (extended temperature range) for CPU 222/224/224 XP/226 4 inputs, 24 V DC, 6AG1 22-1BF22-2XB0 4 outputs, 24 V DC; 0.75 A, electrically isolated A) 8 inputs, 24 V DC, 6AG1 22-1BH22-2XB0 8 outputs, 24 V DC; 0.75 A, electrically isolated A) 16 inputs, 24 V DC, 6AG1 22-1BL22-2XB0 16 outputs, 24 V DC; 0.75 A, electrically isolated A) 4 inputs, 24 V DC, 6AG1 22-1HF22-2XB0 4 outputs, relays A) 8 inputs, 24 V DC, 6AG1 22-1PH22-2XB0 8 outputs, relays A) 16 inputs, 24 V DC, 6AG1 22-1PL22-2XB0 16 outputs, relays A) Accessories see ordering data for S7-200 digital modules A) Subject to export regulations: AL: N and ECCN: EAR99H /0 Siemens ST

31 Analog modules Analog modules Overview Analog inputs and outputs for the SIMATIC S7-200 With extremely short conversion times For connections of analog sensors and actuators without additional amplifier For solving the more complex automation tasks Technical specifications EM 21 6ES7 21-0HC22-0XA0 Current consumption from load voltage L+ (no load), 60 ma max. from backplane bus 5 V DC, max. 20 ma Power dissipation, typical 2 W Connection system Pluggable I/O terminals No Analog inputs Number of analog inputs 4; Differential Length of cable shielded, max 100 m; to sensor Permissible input voltage for the 0 V voltage input (destruction limit), max. Permissible input voltage for the 2 ma current input (destruction limit), max. Input ranges (rated values), voltages - 0 to +5 V Yes - 0 to +10 V Yes V to +2.5 V Yes - -5 V to +5 V Yes Input ranges (rated values), currents - 0 to 20 ma Yes Characteristic curve linearization - for voltage measurement no - for current measurement no Temperature compensation - parameterizable No Analog value formation Integration and conversion time/triggering per channel - with over-range (bits incl. sign), max - Interference voltage suppression for interference frequency f1 in Hz 6ES7 21-0HC22-0XA0 12 Bit 40 db, DC up to 60 V for interference frequency 50 / 60 Hz - Conversion time (per channel) 250 µs Displayable conversion value range - bipolar signals -2,000 to +2,000 - unipolar signals 0 to 2000 Error/accuracies Interference voltage suppression for f = n x (fl +/- 1 %) - Common-mode voltage, max. 12 V Potentials/ electrical isolation Analog output functions - Electrical isolation, No analog inputs Dimensions and weight Weight, approx. 18 g Width 71.2 mm Height 80 mm Depth 62 mm Siemens ST /1

32 Analog modules Analog modules Technical specifications EM 22 Technical specifications EM 25 Current consumption from backplane bus 5 V DC, max. from sensor current or ext. power supply (24 V DC), max. Power dissipation, typical Connection system Pluggable I/O terminals Analog outputs Number of analog outputs 2 6ES7 22-0HB22-0XA0 20 ma 70 ma 2 W No Output ranges, voltage to +10 V Yes Output ranges, current - 4 to 20 ma Yes Burden resistance (in the nominal output range) - at voltage outputs, min. 5 kω - at current outputs, max. 0.5 kω Analog value formation Integration and conversion time/triggering per channel - with over-range U/12 bits, I/11 bits Settling time - for voltage output function 100 µs - for current output function 2 ms Displayable conversion value range - bipolar signals -2,000 to +2,000 - unipolar signals 0 to 2,000 Error/accuracies Operational limit in the entire temperature range - Relative to the output range, +/- 2 % voltage - Relative to the output range, +/- 2 % current Basic error limit (operational limit at 25 C) - relative to the output range, +/- 0.5 % voltage - relative to the output range, +/- 0.5 % current Potentials/ electrical isolation Analog output functions - Electrical isolation, No analog output functions Dimensions and weight Weight, approx. 148 g Width 46 mm Height 80 mm Depth 62 mm 6ES7 25-0KD22-0XA0 Current consumption from backplane bus 5 V DC, max. 0 ma from sensor current or ext. 60 ma power supply (24 V DC), max. Power dissipation, typical 2 W Connection system Pluggable I/O terminals No Analog inputs Number of analog inputs 4; Differential Permissible input voltage for the 0 V voltage input (destruction limit), max. Permissible input voltage for the 2 ma current input (destruction limit), max. Input ranges (rated values), voltages -Voltage Yes - 0 to +50 mv Yes - 0 to +100 mv Yes - 0 to +500 mv Yes - 0 to +1 V Yes - 0 to +5 V Yes - 0 to +10 V Yes - -1 V to +1 V Yes V to +10 V Yes mv to +100 mv Yes V to +2.5 V Yes mv to +25 mv Yes mv to +250 mv Yes - -5 V to +5 V Yes mv to +50 mv Yes mv to +500 mv Yes Input ranges (rated values), currents - Current Yes - 0 to 20 ma Yes Characteristic curve linearization - for voltage measurement No - for current measurement No Temperature compensation - parameterizable No Analog outputs Number of analog outputs 1 Output ranges, voltage to +10 V Yes Output ranges, current - 0 to 20 ma Yes Burden resistance (in the nominal output range) - at voltage outputs, min. 5 kω - at current outputs, max. 0.5 kω /2 Siemens ST

33 Analog modules Analog modules Technical specifications (continued) Ordering Data Order No. 6ES7 25-0KD22-0XA0 Analog value formation Integration and conversion time/triggering per channel - with over-range 12 Bit; 11 bits for power output (bits incl. sign), max - Basic conversion time, ms < 0.25 ms - Interference voltage 40 db, DC to 60 Hz suppression for interference frequency f1 in Hz Settling time - for voltage output function 100 µs - for current output function 2 ms Displayable conversion value range - bipolar signals -2,000 to +2,000 - unipolar signals 0 to 2,000 Error/accuracies Operational limit in the entire temperature range - Relative to the output range, +/- 2 % voltage - Relative to the output range, +/- 2 % current Basic error limit (operational limit at 25 C) - relative to the output range, +/- 0.5 % voltage - relative to the output range, +/- 0.5 % current Interference voltage suppression for f = n x (fl +/- 1 %) - Common-mode voltage, max. 12 V Potentials/ electrical isolation Analog output functions - Electrical isolation, No analog output functions Analog input functions - Electrical isolation, No analog inputs Dimensions and weight Weight, approx. 186 g Width 71.2 mm Height 80 mm Depth 62 mm EM 21 analog input module A) for CPU 222/224/224 XP/226; 4 inputs, 0-10 V, 12-bit resolution EM 22 analog output module A) for CPU 222/224/224 XP/226; 2 outputs, ± 10 V, 12-bit resolution EM 25 analog input/output A) for CPU 222/224/224 XP/226; 4 inputs, 1 output, ±10 V DC, 12-bit resolution Grounding terminal 10 items Front flap set A) contains different covering flaps for CPU and EM; Spare part S7-200 programmable controller, system manual for CPU 221/222/224/224 XP/226 and STEP 7-Micro/Win V4 German English French Spanish Italian Chinese 6ES7 21-0HC22-0XA0 6ES7 22-0HB22-0XA0 6ES7 25-0KD22-0XA0 6ES MA11 6ES7 291-AX20-0XA0 6ES FA24-8AH0 6ES FA24-8BH0 6ES FA24-8CH0 6ES FA24-8DH0 6ES FA24-8EH0 6ES FA24-8FH0 A) Subject to export regulations: AL: N and ECCN: EAR99H Siemens ST /

34 Analog modules EM 21 thermocouple module Overview For user-friendly, high precision temperature detection 7 standard types of th ermocouple can be used For measuring low-level analog signals ( ±80 mv), as well Easy to install in an existing system Technical specifications 6ES7 21-7PD22-0XA0 Current consumption from load voltage L+ (no load), 60 ma max. from backplane bus 5 V DC, max. 87 ma Power dissipation, typical 1.8 W Connection system Pluggable I/O terminals No Analog inputs Number of analog inputs 4 Length of cable shielded, max 100 m; to sensor Permissible input voltage for the 0 V voltage input (destruction limit), max. Loop resistance line 100 Ω Update time (all channels) 405 ms Input ranges (rated values), voltages mv to +80 mv Yes Input ranges (rated values), thermocouples - Type E Yes - Type J Yes - Type K Yes - Type N Yes - Type R Yes - Type S Yes - Type T Yes 6ES7 21-7PD22-0XA0 Analog value formation Measuring principle Sigma-Delta Integration and conversion time/triggering per channel - with over-range (bits incl. sign), 16 Bit; Temperature 0.1 C / 0.1 F max - Interference voltage 85 db at 50 / 60 / 400 Hz suppression for interference frequency f1 in Hz Displayable conversion value range - bipolar signals -27,648 to +27,648 Error/accuracies Cold connection point +/-1.5 C Repeatability in the settled state +/ % at 25 C (relative to the output range) Operational limit in the entire temperature range - Relative to the output range, +/- 0.1 % voltage Interference voltage suppression for f = n x (fl +/- 1 %) - Common-mode voltage, max. 120 V; AC - Common-mode interference, 120 db; at 120 V AC min Potentials/ electrical isolation Analog output functions - Electrical isolation, Yes analog inputs Dimensions and weight Weight, approx. 210 g Width 71.2 mm Height 80 mm Depth 62 mm /4 Siemens ST

35 Analog modules EM 21 thermocouple module Ordering Data Order No. Order No. EM 21 thermocouple module A) 4 inputs +/- 80 mv, 15-bit resolution + sign, thermocouples type J, K, S, T, R, E, N Grounding terminal 10 items Backplane bus expansion cable A) for connecting the two equipment tiers in a two-tier configuration, for CUP 222/224/224 XP/226 6ES7 21-7PD22-0XA0 6ES MA11 6ES AA20-0XA0 S7-200 programmable controller, system manual for CPU 221/222/224/224 XP/226 and STEP 7-Micro/Win V4 German English French Spanish Italian Chinese 6ES FA24-8AH0 6ES FA24-8BH0 6ES FA24-8CH0 6ES FA24-8DH0 6ES FA24-8EH0 6ES FA24-8FH0 A) Subject to export regulations: AL: N and ECCN: EAR99H Siemens ST /5

36 Analog modules EM 21 RTD module Overview For user-friendly, high precision temperature detection Supports 1 standard resistance temperature sensors Easy to install in an existing system Technical specifications 6ES7 21-7PB22-0XA0 Current consumption from load voltage L+ (no load), 60 ma max. from backplane bus 5 V DC, max. 87 ma Power dissipation, typical 1.8 W; Sensor: 1 mw Connection system Pluggable I/O terminals No Analog inputs Number of analog inputs 2 Length of cable shielded, max 100 m; to sensor Permissible input voltage for the voltage input (destruction limit), max. Loop resistance line 0 V; 0 V DC (sensor), 5 V DC (source) 20 Ω; max. 2.7 ohms for Cu Update time (all channels) 405 ms; 700 ms at Pt Input ranges (rated values), resistances - 0 to 150 ohms Yes - 0 to 00 ohms Yes - 0 to 600 ohms Yes Input ranges (rated values), resistance thermometer -Cu 10 Yes -Ni 10 Yes - Ni 1000 Yes -Ni 120 Yes - Pt 100 Yes - Pt 1000 Yes - Pt Yes - Pt 200 Yes - Pt 500 Yes 6ES7 21-7PB22-0XA0 Analog value formation Measuring principle Sigma-Delta Integration and conversion time/triggering per channel - with over-range (bits incl. sign), 16 Bit; Temperature 0.1 C / 0.1 F max - Interference voltage 85 db at 50 / 60 / 400 Hz suppression for interference frequency f1 in Hz Displayable conversion value range - bipolar signals -27,648 to +27,648 Error/accuracies Repeatability in the settled state +/ % at 25 C (relative to the output range) Operational limit in the entire temperature range - Relative to the output range, +/- 0.1 % voltage Interference voltage suppression for f = n x (fl +/- 1 %) - Common-mode voltage, max. 0 V - Common-mode interference, 120 db; at 120 V AC min Potentials/ electrical isolation Analog output functions - Electrical isolation, Yes analog inputs Dimensions and weight Weight, approx. 210 g Width 71.2 mm Height 80 mm Depth 62 mm /6 Siemens ST

37 Analog modules EM 21 RTD module Ordering Data Order No. Order No. EM 21 RTD module A) 2 inputs for thermistors Pt100/200/500/1000/10000, Ni100/120/1000, Cu10; resistance 150/00/600 Ohms, 15-bit resolution + sign Grounding terminal 10 items Backplane bus expansion cable A) for connecting the two equipment tiers in a two-tier configuration, for CUP 222/224/224 XP/226 6ES7 21-7PB22-0XA0 6ES MA11 6ES AA20-0XA0 S7-200 programmable controller, system manual for CPU 221/222/224/224 XP/226 and STEP 7-Micro/Win V4 German English French Spanish Italian Chinese 6ES FA24-8AH0 6ES FA24-8BH0 6ES FA24-8CH0 6ES FA24-8DH0 6ES FA24-8EH0 6ES FA24-8FH0 A) Subject to export regulations: AL: N and ECCN: EAR99H Siemens ST /7

38 SIPLUS analog modules SIPLUS analog modules Overview Technical specifications 6AG1 21-0HC22-2XB0 6AG1 22-0HB22-2XB0 6AG1 25-0KD22-2XB0 see 6ES7 21-0HC22-0XA0 see 6ES7 22-0HB22-0XA0 see 6ES7 25-0KD22-0XA0 Analog inputs and outputs for the SIMATIC S7-200 With extremely short conversion times For connections of analog sensors and actuators without additional amplifier For solving the more complex automation tasks These modules are designed for an ambient range of 25 C to + 70 C, condensation permissible extraordinary medial load (for example by chloric and sulphuric atmospheres) Ordering Data Order No. SIPLUS EM 21 analog input 6AG1 21-0HC22-2XB0 module A) (extended temperature range) for CPU 222/224/224 XP/226; 4 inputs, 0-10 V, resolution 12 bit SIPLUS EM 22 analog output 6AG1 22-0HB22-2XB0 module A) (extended temperature range) for CPU 222/224/224 XP/226; 2 outputs, ± 10 V, resolution 12 bit SIPLUS EM 25 analog 6AG1 25-0KD22-2XB0 input/output module A) (extended temperature range) for CPU 222/224/224 XP/226; 4 inputs, 1 output, ±10 V DC, resolution 12 bit Accessories siehe Ordering Data for S7-200 analog modules A) Subject to export regulations: AL: N and ECCN: EAR99H /8 Siemens ST

39 Function modules EM 25 positioning module Overview Function modules for simple positioning tasks (1 axis) Stepper motors and servo moto rs from the Micro Stepper to the high-performance servo drive can be connected Flexible connection possibilities Full support from STEP 7-Micro/WIN with parameterization and startup Technical specifications Supply voltages Rated value - permissible range, lower limit (DC) - permissible range, upper limit (DC) Current consumption from backplane bus 5 V DC, max. from supply voltage L+, max. Configuration Number of modules per CPU 6ES7 25-1AA22-0XA0 11 V 0 V 190 ma 00 ma; from 12 V DC, 10 ma from 24 V DC max. 5 with CPU 226/226XM, max. with CPU 224, max. 1 with CPU 222 Digital inputs Number of digital inputs 5 Functions Stop (STP), reference point switch (RPS), upper limit switch (LMT+), lower limit switch (LMT-), zero point (ZP) Length of cable - Length of cable shielded, max 100 m; STP, RPS, LMT+, LMT- 100 m, ZP 10 m - Length of cable unshielded, max 0 m; STP, RPS, LMT+, LMT- 0 m, ZP not advisable Type IEC Type 1, p-reading Input voltage - Rated value, DC 24 V - for signal "0" STP, RPS, LMT+, LMT- DC 5 V; ZP DC 1 V - for signal "1" STP, RPS, LMT+, LMT- DC 15 V; ZP DC V Input delay (at rated value of the input voltage) For standard inputs - Parameterizable Yes; STP, RPS, LMT+, LMT- 0.2 to 12.8 ms ZP min 2 µs Sensor Connectable encoders - 2-wire BEROS Yes - permissible closed-circuit 1 ma current (2-wire BEROS), max. Drive interface Signal output I - Number 4; choice of RS422/RS485 or 5 V DC - Type RS422/RS485 electrically isolated (P0+, P0-, P1+, P1-) - Differential output voltage, min. 2.8 V; RL=200 ohms - Pulse frequency 200 khz; P0+, P0-, P1+, P1-, P0, P1 - Length of cable, max. 10 m; 10 m shielded; 1 m unshielded Signal output III - Type 5 V DC isolated (P0, P1, DIS, CLR) - Output voltage 0 V DC - Output current 50 ma; output delay (DIS, CLR) max. 0 µs Potentials/ electrical isolation Digital input functions - between the channels Yes - between the channels, in groups of Dimensions and weight Weight, approx. Width Height Depth 1 (STP, RPS, ZP), 2 (LMT-, LMT+) 190 g 71.2 mm 80 mm 62 mm Siemens ST /9

40 Function modules EM 25 positioning module Ordering Data Order No. Order No. EM 25 positioning module A) for activating stepper motors or servo drives Grounding terminal 10 items Backplane bus expansion cable A) for connecting the two equipment tiers in a two-tier configuration, for CUP 222/224/224 XP/226 6ES7 25-1AA22-0XA0 6ES MA11 6ES AA20-0XA0 S7-200 programmable controller, system manual for CPU 221/222/224/224 XP/226 and STEP 7-Micro/Win V4 German English French Spanish Italian Chinese 6ES FA24-8AH0 6ES FA24-8BH0 6ES FA24-8CH0 6ES FA24-8DH0 6ES FA24-8EH0 6ES FA24-8FH0 A) Subject to export regulations: AL: N and ECCN: EAR99H /40 Siemens ST

41 Communication EM 241 modem Overview Modem expansion modu le for SIMATIC S7-200 The Plug&Play solution for a ll classical modem tasks in the PLC field Used for remote maintenance/ remote diagnostics, CPU-to- CPU/PC communication or SMS/pager messaging Minimal engineering outlay required Replaces external modems connected via the communications interface of the CPU Easy to retrofit Technical specifications Ordering Data Order No. 6ES AA22-0XA0 Voltages and currents Load voltage L+ - Rated value (DC) 24 V - permissible range, 20.4 V lower limit (DC) - permissible range, 28.8 V upper limit (DC) Current consumption from load voltage L+ (no load), 70 ma max. from backplane bus 5 V DC, max. 80 ma; from expansion bus Power dissipation, typical 2.1 W Communication functions Bus protocol/transfer protocol PPI, Modbus Connection system Phone lines RJ11 (4 cables, 6 contacts) Modem Standards Bell 10, Bell 212, V. 21, V. 22, V. 22 bis, V. 2c, V. 2, V. 2 bis, V. 4 (preset) Tone dialing Yes Pulse dialing Yes Dimensions and weight Weight, approx. 190 g Width 71.2 mm Height 80 mm Depth 62 mm EM 241 modem A) Analog modem for remote maintenance/remote diagnostics; CPU-to-CPU/PC communication, SMS/pager messaging Grounding terminal 10 items S7-200 programmable controller, system manual for CPU 221/222/224/224 XP/226 and STEP 7-Micro/Win V4 German English French Spanish Italian Chinese 6ES AA22-0XA0 6ES MA11 6ES FA24-8AH0 6ES FA24-8BH0 6ES FA24-8CH0 6ES FA24-8DH0 6ES FA24-8EH0 6ES FA24-8FH0 A) Subject to export regulations: AL: N and ECCN: EAR99H Siemens ST /41

42 Communication EM 277 PROFIBUS DP module Overview For connection of the S7-22x to PROFIBUS DP (as slave) and MPI Can be simultaneously operat ed as MPI slave and DP slave Transmission rate max. 12 Mbps Can be used with CPU from version 6ES7 22x-xxx 21-xxxx Technical specifications 6ES AA22-0XA0 Voltages and currents Load voltage L+ - Rated value (DC) 24 V - permissible range, 20.4 V lower limit (DC) - permissible range, 28.8 V upper limit (DC) Current consumption from backplane bus 5 V DC, max. 150 ma from sensor current or ext. 180 ma; 0 to 180 ma power supply (24 V DC), max. Power dissipation, typical 2.5 W Configuration Connectable stations Communication functions Bus protocol/transfer protocol TD 200 from V2.0, OP, TP, PG/PC, S7-00/400, PROFIBUS DP-Master PROFIBUS DP (Slave), MPI (Slave) Number of connections - MPI connections, max. 6 - MPI connections reserved 1 for OP communication - MPI connections reserved 1 for PG communication Interfaces Number of RS485 interfaces 1 5 V DC - Output current, max. 90 ma 24 V DC - Voltage range 20.4 to 28.8 V - Output current, max. 120 ma - Current limiting 0.7 to 2.4 A Connection system Pluggable I/O terminals PROFIBUS DP Transmission rate, max. 6ES AA22-0XA0 No 12 Mbit/s; 9.6 / 19.2 / / 9.75 / / 500 kbit/s 1 / 1.5 / / 6 / 12 Mbit/s Station addresses 0 to 99, adjustable Length of cable, max. 1,200 m; 100 to 1200 m, depending on the rate Number of stations in the system, 126; of which max. 99 EM 277 max. Number of stations per segment, 2 max. Automatic Yes speed detection Dimensions and weight Weight, approx. 175 g Width 71.2 mm Height 80 mm Depth 62 mm Ordering Data Order No. Order No. PROFIBUS DP EM 277 input module A) for CPU 222/224/224 XP/226, for connecting to PROFIBUS DP (slave) and MPI 6ES AA22-0XA0 SIPLUS PROFIBUS DP EM 277 input module (extended temperature range) for CPU 222/224/224 XP/226, for connecting to PROFIBUS DP (slave) and MPI 6AG AA22-2XA0 A) Subject to export regulations: AL: N and ECCN: EAR99H /42 Siemens ST

43 Communication CP 24-2 Overview The CP 24-2 is the AS-Interface master for the innovated generation of SIMATIC S The communications processor (6GK1 24-2AX01-0AX0) supports the extended AS-Interface specification V2.1 and has the following functions: Up to 62 AS-Interface slaves can be connected and integrated analog value transfer (according to the extended AS-Interface specification V2.1) Supports all AS-Interface master functions in accordance with the extended AS-Interface specification V2.1 Status displays for operating states and display of the functional readiness of connected slaves with LEDs in the front panel Indication of errors (incl. AS-Interface voltage errors, configuration errors) with LEDs in the front panel Compact enclosure designed to match the new generation of SIMATIC S Technical specifications AS-Interface specification V 2.1 Interfaces Address space used in the PLC Corresponding to 2 I/O modules (8 DI/8 DO and 8 AI/8 AO) AS-Interface connection Terminal Current consumption Via AS-Interface Max. 100 ma Through backplane bus Typ. 220 ma at DC 5 V Power loss Approx. 2 W Perm. environmental conditions Operating temperature - Horizontal mounting 0 C to +55 C - Vertical mounting 0 C to +45 C Transport/storage temperature - 40 C to +70 C Relative humidity Max. 95% at +25 C Design Module format S7-22x expansion module Dimensions (W x H x D) in mm 71.2 x 80 x 62 (H+16 mm with holes for wall mounting) Weight Approx. 250 g Space required 1 slot Ordering Data CP 24-2 communications processor A) For connection of SIMATIC S7-200 (2 nd generation) to AS-Interface with bus connector Manual for CP 24-2 Including AS-Interface fundamentals and diskette with program examples paper version German English French Spanish Italian Order No. 6GK7 24-2AX01-0XA0 6GK7 24-2AX00-8AA0 6GK7 24-2AX00-8BA0 6GK7 24-2AX00-8CA0 6GK7 24-2AX00-8DA0 6GK7 24-2AX00-8EA0 A) Subject to export regulations: AL: N and ECCN: EAR99H Siemens ST /4

44 Communication CP 24-1 Overview Connection of SIMATIC S7-200 to Industrial Ethernet with - 10/100 Mbit/s - Half/full duplex - RJ 45 socket - TCP/IP Configuration, remote programmi ng and service is possible with STEP 7-Micro/WIN through Industrial Ethernet (program upload and download, status) CPU/CPU communication is poss ible through Industrial Ethernet (Client + Server, 8 S7 connections + 1 PG connection) Thanks to integration in S7-O PC, further processing of PLC data in PC applications is possible Modules can be replaced with out the need for a programming device Technical specifications Data rate 10/100 Mbit/s autosensing Interfaces 10 BaseT, 100 Base TX RJ45 Connection for power supply 24 V DC (± 5%) Current consumption From backplane bus 55 ma From external 24 V DC 60 ma Power loss at 24 V DC 1.75 W Perm. environmental conditions Operating temperature - Horizontal mounting 0 C to +55 C - Vertical mounting 0 C to +45 C Transport/storage temperature -40 C to +70 C Relative humidity Max. 95% at +25 C Design Dimensions (W x H x D) in mm 71.2 x 80 x 62 Weight 150 g Performance data S7 communication/ PG communication Number of usable connections Configuration Ordering Data CP 24-1 communications processor D) for connection of SIMATIC S7-200 to Industrial Ethernet; for S7 communication, PG communication with electronic manual on CD-ROM, German, English, French, Italian, Spanish Programming software STEP 7- Micro/WIN2 V.2 for SP and higher Target system: All CPUs of the SIMATIC S7-200 Prerequisite: Windows 95/98/NT/2000/XP on PG or PC with or Pentium processor delivery package: German, English, French, Spanish, Italian; with online documentation Single license B) Single license Upgrade 1) B) 6ES7 8 S7 connections + 1 PG connection With STEP 7-Micro/WIN (V.2 SP1 and higher) Order No. 6GK7 24-1EX00-0XE0 6ES CC0-0YX CC0-0YX 1) Upgrade for all previous STEP 7-Micro/WIN and STEP 7-Micro/DOS versions B) Subject to export regulations: AL: N and ECCN: EAR99S D) Subject to export regulations: AL: N and ECCN: 5D992B1 /44 Siemens ST

45 Communication CP 24-1 IT Overview Connection of SIMATIC S7-200 to Industrial Ethernet with - 10/100 Mbit/s - Half/full duplex - RJ45 socket - TCP/IP Configuration, remote programmi ng and service is possible with STEP 7-Micro/WIN through Industrial Ethernet (program upload and download, status) CPU/CPU communication is poss ible through Industrial Ethernet (Client + Server, 8 S7 connections + 1 PG connection) IT communication - Web function - function - FTP Client function for program-controlled data exchange (e.g. DOS, UNIX, LINUX, embedded systems) FTP server with 8 Mbyte memory OPC enables further processing of PLC data in PC applications Technical specifications Data rate 10/100 Mbit/s autosensing Interfaces 10BaseT, 100BaseTX RJ45 Connection for power supply 24 V DC (± 5%) Current consumption From backplane bus 55 ma From external 24 V DC 60 ma Power loss at 24 V DC 1.75 W Perm. environmental conditions Operating temperature - Horizontal mounting 0 C to +55 C - Vertical mounting 0 C to +45 C Transport/storage temperature -40 C to +70 C Relative humidity Max. 95% at +25 C Design Dimensions (W x H x D) in mm 71.2 x 80 x 62 Weight 150 g Performance data IT communication Number of connections to an 1 server client 2 s with max characters Number of FTP connections 1 Number of HTTP connections 4 Adjustable access enable 8 users program Memory capacity of the Flash 8 MB Memory file system Service life of the Flash Memory 1,000,000 write cycles cells S7 communication/ PG communication Number of usable connections 8 S7 connections + 1 PG connection Configuration With STEP 7-Micro/WIN, V.2 SP and higher Ordering Data CP 24-1 IT communications processor D) for connection of SIMATIC S7-200 to Industrial Ethernet; for S7 communication, PG communication and WWW server; with electronic manual on CD-ROM German, English, French, Italian, Spanish Programming software STEP 7- Micro/WIN2 V.2 for SP and higher Target system: All CPUs of the SIMATIC S7-200 Prerequisite: Windows 95/98/NT/2000/XP on PG or PC with or Pentium processor Delivery package: German, English, French, Spanish, Italian; with online documentation Single license B) Single license Upgrade 1) B) 6ES7 Order No. 6GK7 24-1GX00-0XE0 6ES CC0-0YX CC0-0YX 1) Upgrade for all previous STEP 7-Micro/WIN and STEP 7-Micro/DOS versions B) Subject to export regulations: AL: N and ECCN: EAR99S D) Subject to export regulations: AL: N and ECCN: 5D992B1 Siemens ST /45

46 Power supplies Power supplies Overview The regulated load power supply for the SIMATIC S Coordinated design and functiona lity, can be integrated easily into the PLC network. For reliably powering the controller, encoders and sensors with 24 V DC,.5 A. Flexible implementation, either in industry or in the domestic supply system Technical specifications Type.5 A Order No. 6EP1 2-1SH1 Input Single-phase AC Rated voltage V in rated 120/20 V AC Settable using wire jumper Voltage range 9 to 12 V/187 to 264 V AC Overvoltage strength 2. x V inrated, 1. ms Mains buffering I out rated > 20 ms at V in = 187 V Rated line frequency; range 50/60 Hz, 47 to 6 Hz Rated currenti in rated 1.65/0.95 A Inrush current limitation (+25 C) < A, < ms (V in = 20 V) I 2 t < 1.0 A 2 s Integrated line-side fuse T 2.5 A/250 V (not accessible) Recommended circuit-breaker (EC 898) in mains supply line Output Rated voltage V out rated Two-pole circuit-breaker from 10 A, Characteristic C or from 6 A, Characteristic D Stabilized, floating direct voltage 24 V DC Total tolerance ± 5 % (typ. ± 2 %) Stat. mains compensation Approx. ± 0.1 % Stat. load compensation Approx. ± 0.2 % Residual ripple (clock frequency: < 150 mv pp (typ. 0 mv pp ) approx. 50 khz) Spikes (bandwidth: 20 MHz) < 240 mv pp (typ. 110 mv pp ) Setting range - Status display - Power ON/OFF behavior No overshoot of V out (soft start) Starting delay/voltage rise < 1 s/typ. 80 ms Rated current I out rated.5 A Current range Up to +45 C 0 to.5 A Up to +60 C 0 to.5 A Dyn. V/I with Starting on short circuit typ. 5 A for 100 ms Short-circuit in operation typ. 5 A for 100 ms Parallel connection for increased Yes, up to 5 output Type.5 A Order No. 6EP1 2-1SH1 Efficiency Efficiency at V out rated, I out rated Approx. 84 % Power loss at V out rated, I out rated Approx. 16 W Control Dyn. mains compensation ± 0. % V out (V in rated ±15 %) Dyn. load compensation < ± 10 % V out (typ. ± % V out ) (I out : 50/100/50 %) Settling time Load step from 50 to 100% < 5 ms Load step from 100 to 50% < 5 ms Protection and monitoring Output overvoltage protection Current limitation.8 A Short-circuit protection Stabilized current characteristic to typ. 14 V, electronic shutdown below that, automatic restart RMS sustained short-circuit < 4 A current Overload/short-circuit indicator - Safety Galvanic isolation primary/secondary Protective class Discharge current TÜV test CE-marking UL/cUL (CSA), approval FM approval - Appr. for use in marine vessels - Degree of protection (EN 60529) IP20 Yes, SELV output voltage V out acc. to EN Class I <.5 ma Yes Yes Yes, culus listed (UL 508, CSA 22.2 No. 14-M91), File E14289 /46 Siemens ST

47 Power supplies Power supplies Technical specifications (Continued) Ordering Data Order No. Type Order No. EMC Interference emission.5 A 6EP1 2-1SH1 EN Class B Line harmonics limitation EN Interference immunity EN Operating specifications Ambient temperature range Transportation and storage temperature range Humidity rating Mechanical specifications Connections Mains input L, N, PE Output L+ Output M Dimensions (W x H x D) in mm Weight approx. Mounting Accessories 0 to +60 C with natural convection -25 to +85 C Climatic class K acc. to EN 60721, no condensation One screw-type terminal each for 0.5 to 1 mm 2 finely stranded, 0.5 to 1.5 mm 2 single-core 1 screw-type terminal for 0.5 to 1 mm 2 2 screw-type terminals for 0.5 to 1 mm x 80 x kg Snap-mounting on DIN rail EN x15/7.5, wall mounting Mounting bracket Stabilized load power supply 6EP1 2-1SH1 SITOP power.5 A A) 120/20 V AC, 24 V/.5 A DC Mounting bracket 6EP AA01 for space-saving installation of power supply on the cabinet rear panel (the power supply is mounted with the side wall on the rear panel of the housing); for switchgear cabinets with a depth of 240 mm or more A) Subject to export regulations: AL: N and ECCN: EAR99H Siemens ST /47

48 Human Machine Interface TD 200 text display Overview The user-friendly text display for the S7-200 For control and monitoring: Message text display, intervention in PLC program, setting of inputs and outputs Direct connection to CPU interf ace using supplied cable or incorporation into network (also via EM 277) No separate power supply required No separate parameterization software required Addressing and setting of contrast in supplied menu Ordering Data Text Display TD 200 for connecting to SIMATIC S7-200; used with STEP 7 Micro/WIN V.2 SP4 and higher. PROFIBUS bus connector IP20 with 90 cable feeder without PG connection with PG connection PROFIBUS bus connector IP20 with 5 cable feeder without PG connection with PG connection PROFIBUS FC Standard Cable for connecting to PPI; standard type with special design for quick mounting, 2-wire, shielded, sold by the meter, up to 1000 m, minimum order 20 m Order No. 6ES AA0-0YA0 6ES BA12-0XA0 6ES BB12-0XA0 6ES BA41-0XA0 6ES BB41-0XA0 6XV1 80-0EH10 Technical specifications 6ES AA0-0YA0 Power supply Input voltage - Rated value (DC) 24 V; Power supplied through the S7-200 communications interface or optional external power supply unit. The CPU sensor power supply (24 V DC) is not brought into load Input current - Rated value at 24 V DC 120 ma MPI Transmission rate (PPI), max kbit/s 1st interface Physical RS 485 Functionality -PPI Yes PPI - Number of stations 126; S7-200, OP, TP, TBP, PG/PC Operator control and monitoring Display - Type LCD backlit - Number of lines 2 - Number of characters per line 20; Chars/line: ASCII, Cyrillic; 10 chars per line: Chinese - Height of characters 5 mm Environmental requirements Operating temperature -min. 0 C -max. 60 C Storage/transportation temperature -min. -40 C -max. 70 C Degree of protection and class of protection -IP 65 Yes; frontal Dimensions and weight Weight, approx. 250 g Width 148 mm Height 76 mm Depth 27 mm Installation cutout, width 18 mm Installation cutout, height 68 mm Cabinet/control panel thickness 0. mm; 0. to 4 mm /48 Siemens ST

49 Human Machine Interface TD 200C text display Overview The user-friendly text display fo r the S7-200 with customizable display For control and monitoring: Message text display, intervention in PLC program, setting of inputs and outputs Direct connection to CPU interf ace using supplied cable or incorporation into network (also via EM 277) No separate power supply required No separate parameterization software required Frontpanel design can be individually selected Addressing and setting of contrast in supplied menu Ordering Data Text Display TD 200C A) With individually configurable control elements on the front of the device; for connecting to SIMATIC S7-200; can be used with STEP 7-Micro/WIN V4 and higher PROFIBUS bus connector IP20 with 90 cable feeder without PG connection with PG connection PROFIBUS bus connector IP20 with 5 cable feeder without PG connection with PG connection PROFIBUS FC Standard Cable for connecting to PPI; standard type with special design for quick mounting, 2-wire, shielded, sold by the meter, up to 1000 m, minimum order 20 m Order No. 6ES AA10-0YA0 6ES BA12-0XA0 6ES BB12-0XA0 6ES BA41-0XA0 6ES BB41-0XA0 6XV1 80-0EH10 Technical specifications 6ES AA10-0YA0 Power supply Input voltage - Rated value (DC) 24 V; Power supplied through the S7-200 communications interface or optional external power supply unit. The CPU sensor power supply (24 V DC) is not brought into load Input current - Rated value at 24 V DC 120 ma MPI Transmission rate (PPI), max kbit/s 1st interface Physical RS 485 Functionality -PPI Yes PPI - Number of stations 126; S7-200, OP, TP, TBP, PG/PC Operator control and monitoring Display - Type STN graphics display, LED backlighting - Number of lines 2 - Number of characters per line 20; Chars/line: ASCII, Cyrillic; 10 chars per line: Chinese - Height of characters 5 mm Environmental requirements Operating temperature -min. 0 C -max. 60 C Storage/transportation temperature -min. -20 C -max. 70 C Degree of protection and class of protection -IP 65 Yes; frontal Dimensions and weight Weight, approx. 200 g Width 148 mm Height 76 mm Depth 28 mm Installation cutout, width 18 mm Installation cutout, height 68 mm Cabinet/control panel thickness 0. mm; 0. to 4 mm A) Subject to export regulations: AL: N and ECCN: EAR99H Siemens ST /49

50 SIMATIC S7-200 Human Machine Interface SIMATIC TP 177micro Overview Configuration Configuring is carried out with the engineering software SIMATIC WinCC flexible Micro, Compact, Standard or Advanced (see HMI software/engineering software SIMATIC WinCC flexible). The necessary HardwareSupportPackage (HSP) can be downloaded free of charge via the following link: Importing of TP-Designer projects (TP 070) into WinCC flexible is not possible. A PC/PPI adaptor cable is needed to download the configuration. Touch panel for operator cont rol and monitoring of small machines and plants Low-cost starter unit in the cate gory of touch panels with graphics capability complete with all the basic functions required for simple tasks Pixel graphics 5.7" STN Touch Screen (analog/resistive), Bluemode (4 levels) Specifically for SIMATIC S7-200: Communication to the PLC is performed via the integrated interface over a point-to-point connection Connected to the PLC via MPI or PROFIBUS DP cable The SIMATIC TP 177micro is th e innovative successor to the SIMATIC TP 070/TP 170micro Touch Panels Ships end of 4th quarter 2004 /50 Siemens ST

51 Human Machine Interface SIMATIC TP 177micro Technical specifications Type TP 177micro Display STN liquid crystal display (LCD) Size 5.7" Resolution (W x H in pixels) 20 x 240 (240 x 20 with vertical design) Colors 4 blue levels MTBF backlighting (at 25 C) Approx. 50,000 hours Control elements Touch screen Numeric/alphanumeric input Yes / Yes 1) Processor ARM CPU Memory Type Flash / RAM Usable memory 256 KB for user data Ports 1 x RS 485 Interface with PLC S7-200 Power supply 24 V DC Permitted range +18 V to +0 V DC Nominal current 0.24 A Clock Software clock, without battery backup Degree of protection Front IP65 (in installed state), NEMA 4, NEMA 4x, NEMA 12 Rear IP20 Certification Available soon: FM, culus, CE, C-Tick Dimensions Front W x H (mm) 212 x 156 Cut-out W x H (mm) 198 x 142 Weight 0.7 kg Ambient conditions Mounting position Vertical - Max. permissible angle of inclination without forced ventilation 2) Temperature - Operation (vertical installation) 0 C to +50 C 2) - Operation (max. inclination) 2) - Transport, storage -20 C to +60 C Max. relative humidity 2) 1) English font only can be displayed 2) Status not yet established before going to print ) Not battery-backed Type TP 177micro Functions Message system No. of messages 500 Bit messages Yes Analog messages No No. of process values per message 8 Message buffer Circulating buffer, 128 entries each ) Process diagrams 250 Text objects 500 text elements Variables per diagram 20 Entries per diagram 20 Graphics objects Bitmaps, icons, background images Dynamic objects Bars - Directories Yes Variables 250 User administration (security) Yes Online languages 5 Project languages (incl. system messages) Character set Configuration tool Danish, German, traditional Chinese, simplified Chinese, English, Finnish, French, Greek, Italian, Japanese, Korean, Dutch, Norwegian, Polish, Portuguese, Russian, Swedish, Spanish, Czech, Turkish, Hungarian WinCC flexible, ideographic languages From WinCC flexible 2004 Micro HSP for OP 7micro, OP 7, OP 77A, TP 177micro, TP 177A (to be ordered separately) Configuration transfer Serial via RS 485 Note: All specified values are maximum values. The total number of configurable elements is limited by the size of the user memory. Siemens ST /51

52 Human Machine Interface SIMATIC TP 177micro Ordering Data Order No. Order No. SIMATIC TP 177micro E) Touch Panel for connection to the SIMATIC S7-200, 5.7" STN display Starter pack TP 177micro E) comprising: TP 177micro touch panel SIMATIC WinCC flexible Micro engineering software SIMATIC HMI Manual Collection, 5 languages (English, German, French, Italian, Spanish) comprising all currently available user manuals, product manuals and communication manuals for SIMATIC HMI MPI cable (5 m) Configuration 6AV CA11-0AX0 6AV DA01-0AA0 with SIMATIC WinCC flexible see catalog ST 80 HSP OP 7micro, OP 7, OP 77A, TP 177micro, TP 177A: WW/view/en/ Documentation (to be ordered separately) Instruction manual OP 7micro, TP 177micro German 6AV DF01-0AA0 English 6AV DF01-0AB0 French 6AV DF01-0AC0 Italian 6AV DF01-0AD0 Spanish 6AV DF01-0AE0 User manual WinCC flexible Micro German 6AV AA01-0AA0 English 6AV AA01-0AB0 French 6AV AA01-0AC0 Italian 6AV AA01-0AD0 Spanish 6AV AA01-0AE0 SIMATIC HMI Manual Collection 6AV SA01-0AX0 Electronic documentation, on CD-ROM 5 languages (English, French, German, Italian and Spanish) comprising all currently available user manuals, product manuals and communication manuals for SIMATIC HMI Accessories for supplementary ordering Protective foil 6AV XC00-0AX0 (pack of 10) Service package 6AV XA00-4AX0 comprising: Gaskets Clamp-type terminals Plug-in terminal strip (block of two) PC/PPI cable Multimaster 1) A) 6ES7 901-CB0-0XA0 for connecting the S7-200 to serial PC/OP interface and for downloading the configuration for Micro Panels PROFIBUS 80-1T connecting 6XV1 80-1CH0 cable For connection of data terminal, precut/preassembled with two sub D connectors, 9-pin, m System interfaces see catalog ST 80 Connecting cables see catalog ST 80 1) The PC/PPI cable with Order No. 6ES7 901-BF21-0XA0 can also still be used A) Subject to export regulations AL: N and ECCN: EAR99H E) Subject to export regulations AL: N and ECCN: 5D002ENCA /52 Siemens ST

53 Overview SIMATIC S7-200 Human Machine Interface SIMATIC OP 7micro Operator panel for operator co ntrol and monitoring of small machines and plants A new dimension in graphics: small and clever Pixel graphics " LCD, monochrome 8 system keys, 4 freely co nfigurable function keys Specifically for SIMATIC S7-200: Communication with the controller is point-to-point using the integral interface Connected to the PLC via MPI or PROFIBUS DP cable Start of delivery approximately end of 4th quarter 2004 Technical specifications Type OP 7micro Display LCD Size Resolution (W x H in pixels) 160 x 48 Colors Monochrome (yellow-green) MTBF of background lighting Approx. 100,000 hours (at 25 C) Control elements Membrane keyboard Function keys, programmable 4 function keys System keys 8 Numeric/alphanumeric input Yes/yes 1) Processor ARM CPU Memory Type Flash Usable memory for user data 128 KB Ports 1 x RS 485 Interface with PLC S7-200 Power supply 24 V DC Permitted range +18 to +0 V DC Nominal current 0.1 A Clock Software clock, without battery backup Degree of protection Front IP65 (in installed state) NEMA 12, NEMA 4x, NEMA4 Rear IP20 Certification Available soon: FM, culus, CE, C-Tick Dimensions Front W x H (mm) 154 x 84 Cut-out W x H (mm) 18 x 68 Weight 0. kg 1) English font only can be displayed 2) Status not yet established before going to print ) Not battery-backed Note: All specified values are maximum values. The total number of configurable elements is limited by the size of the user memory. Type OP 7micro Ambient conditions Mounting position Vertical - max. permissible angle of 2) inclination without forced ventilation Temperature - Operation (vertical installation) 0 C to +50 C - Operation (max. inclination) 2) - Transport, storage -20 C to +70 C Max. relative humidity 2) Functions Message system No. of messages 250 Bit messages Yes Number of process values 8 per message Message buffer Circulating buffer, 128 entries each ) Process diagrams 250 Text objects 1000 text elements Variables per diagram 20 Fields per diagram 20 Graphics objects 250 Dynamic objects Bars - Directories Yes Variables 500 User administration (security) Yes Online languages 5 Project languages (incl. system messages) Character set Help system Task planner Configuration tool Transfer of the configuration Danish, German, traditional Chinese, simplified Chinese, English, Finnish, French, Greek, Italian, Japanese, Korean, Dutch, Norwegian, Polish, Portuguese, Russian, Swedish, Spanish, Czech, Turkish, Hungarian WinCC flexible, ideographic languages Yes Yes From WinCC flexible 2004 Micro HSP for OP 7micro, OP 7, OP 77A, TP 177micro, TP 177A (to be ordered separately) Serially via RS485 Siemens ST /5

SIMATIC S /2 3/4 3/22 SIPLUS 3/26 3/33 SIPLUS

SIMATIC S /2 3/4 3/22 SIPLUS 3/26 3/33 SIPLUS /2 Introduction /4 Central processing units /22 SIPLUS central processing units /26 Digital modules / SIPLUS digital modules /5 Analog modules /5 Analog modules /8 EM 21 thermocouple module /9 EM 21 RTD

More information

Supply voltage. Input current. Encoder supply. Memory

Supply voltage. Input current. Encoder supply. Memory Data sheet SIMATIC S7-200, CPU 224XP COMPACT UNIT, DC POWER SUPPLY 14 DI DC/10 DO DC, 2 AI, 1 AO 12/16 KB CODE/10 KB DATA, 2 PPI/FREEPORT PORTS Supply voltage Rated value (DC) 24 V DC Load voltage L+ Rated

More information

Supply voltage. Input current. Encoder supply. Memory SIMATIC S7-200, CPU 221 COMPACT UNIT, DC POWER SUPPLY 6 DI DC/4 DO DC, 4 KB CODE/2 KB DATA,

Supply voltage. Input current. Encoder supply. Memory SIMATIC S7-200, CPU 221 COMPACT UNIT, DC POWER SUPPLY 6 DI DC/4 DO DC, 4 KB CODE/2 KB DATA, Data sheet SIMATIC S7-200, CPU 221 COMPACT UNIT, DC POWER SUPPLY 6 DI DC/4 DO DC, 4 KB CODE/2 KB DATA, Supply voltage Rated value (DC) 24 V DC Load voltage L+ Rated value (DC) permissible range, lower

More information

CPU 224. The compact high-performance CPU With 24 inputs/outputs on board Expandable with up to 7 expansion modules Design

CPU 224. The compact high-performance CPU With 24 inputs/outputs on board Expandable with up to 7 expansion modules Design CPU 224 The compact high-performance CPU With 24 inputs/outputs on board Expandable with up to 7 expansion modules Design The CPU 224 is equipped with the following: Integral 24 V encoder/load current

More information

Central processing units CPU 221, CPU 222, CPU 224, CPU 224 XP, CPU 224 XPsi, CPU 226

Central processing units CPU 221, CPU 222, CPU 224, CPU 224 XP, CPU 224 XPsi, CPU 226 Overview CPU 226 The high-performance package for complex technical tasks With additional PPI port for more flexibility and communication options With 40 inputs/outputs on board Expansion capability for

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet *** SPARE PART*** SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General

More information

General information. Display. Supply voltage. Input current. Encoder supply. Power losses

General information. Display. Supply voltage. Input current. Encoder supply. Power losses Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/RELAY, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A, 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA

More information

Display. Supply voltage. Input current. Encoder supply. Output current. Power losses. Memory

Display. Supply voltage. Input current. Encoder supply. Output current. Power losses. Memory Datasheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, AC/DC/RLY, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: AC 85-264 V AC AT 47-63 HZ, PROGRAM/DATA MEMORY: 75 KB Display with

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information

More information

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes. Input current

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes. Input current Datasheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information Engineering

More information

General information. Display. Supply voltage

General information. Display. Supply voltage Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/RELAY, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Data sheet SIMATIC S7-1200F, CPU 1214 FC, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY 125 KB General information

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Data sheet SIMATIC S7-1200F, CPU 1215 FC, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24VDC; 10 DO 24V DC 0.5A; 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Datasheet SIMATIC S7-1200, CPU 1212C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 8 DI 24V DC; 6 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information Engineering

More information

General information. Display. Supply voltage

General information. Display. Supply voltage Data sheet SIMATIC S7-1200, CPU 1212C, COMPACT CPU, DC/DC/RLY, ONBOARD I/O: 8 DI 24V DC; 6 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information Product

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, AC/DC/RELAY, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A, 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: AC 85-264 V AC AT 47-63 HZ, PROGRAM/DATA

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, AC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: AC 85-264 V AC AT 47-63 HZ, PROGRAM/DATA MEMORY: 50 KB General information

More information

General information. Supply voltage. Input current. Encoder supply. Power loss. Memory

General information. Supply voltage. Input current. Encoder supply. Power loss. Memory Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, AC/DC/RELAY, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A, 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: AC 85-264 V AC AT 47-63 HZ, PROGRAM/DATA

More information

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes Datasheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO 24V DC 0.5A 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY:

More information

Display. Supply voltage. Input current. Encoder supply. Output current. Power losses. Memory

Display. Supply voltage. Input current. Encoder supply. Output current. Power losses. Memory Datasheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB Display with display Supply

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Data sheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 100 KB General information Firmware

More information

General information. Display. Supply voltage

General information. Display. Supply voltage Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 6 DI 24V DC; 4 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information Product

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information Engineering

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO 24V DC 0.5A 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Data sheet SIMATIC S7-1200, CPU 1217C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT ONBOARD I/O: 10 DI 24V DC; 4 DI RS422/485; 6 DO 24V DC; 0,5A; 4 DO RS422/485; 2 AI 0-10V DC, 2 AQ 0-20MA; POWER SUPPLY: DC

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current. Power loss. Memory

General information. Display. Supply voltage. Input current. Encoder supply. Output current. Power loss. Memory Data sheet SIPLUS S7-1200 CPU 1214C DC/DC/DC -40...+70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7214-1AG40-0XB0. COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC 10 DO 24 V DC 2 AI 0-10V DC, POWER

More information

General information. Display. Supply voltage. Input current. Encoder supply. Output current

General information. Display. Supply voltage. Input current. Encoder supply. Output current Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO 24V DC 0.5A 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA

More information

General information. Display. Supply voltage. Input current

General information. Display. Supply voltage. Input current Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO 24V DC 0.5A 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA

More information

General information Engineering with Programming package. Display with display

General information Engineering with Programming package. Display with display Datasheet SIPLUS S7-1200 CPU 1212C AC/DC/RLY -40... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7212-1BE31-0XB0. COMPACT CPU, AC/DC/RELAY, ONBOARD I/O: 8 DI 24V DC 6 DO RELAY 2A 2 AI 0-10V DC, POWER

More information

6ES7212-1BD30-0XB0. permissible range, lower limit (DC) permissible range, upper limit (DC)

6ES7212-1BD30-0XB0. permissible range, lower limit (DC) permissible range, upper limit (DC) 6ES7212-1BD30-0XB0 Page 1 Product data sheet 6ES7212-1BD30-0XB0 SIMATIC S7-1200, CPU 1212C, COMPACT CPU, AC/DC/RLY, ONBOARD I/O: 8 DI 24V DC; 6 DO RELAY 0,5A; 2 AI 0-10V DC, POWER SUPPLY: AC 85-264 V AC

More information

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes. Input current

General information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes. Input current Datasheet SIPLUS S7-1200 CPU 1214C DC/DC/DC -40... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7214-1AG31-0XB0. COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER

More information

CPU 1214C. Overview. Design. The compact CPU 1214C has:

CPU 1214C. Overview. Design. The compact CPU 1214C has: CPU 1214C Overview The compact high-performance CPU With 24 integral input/outputs Expandable by: 1 signal board (SB) or communication board (CB) 8 signal modules (SM) Max. 3 communication modules (CM)

More information

General information. Engineering with. Supply voltage. Load voltage L+ Input current. Power losses. Memory. Work memory.

General information. Engineering with. Supply voltage. Load voltage L+ Input current. Power losses. Memory. Work memory. Product data sheet SIMATIC S7-300, CPU 314C-2DP COMPACT CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), INTEGRATED DP INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 64 KBYTE WORKING

More information

Data sheet CC 03, Commander Compact (603-1CC21)

Data sheet CC 03, Commander Compact (603-1CC21) Data sheet CC 03, Commander Compact (603-1CC21) Technical data Order. Type 603-1CC21 CC 03, Commander Compact General information Note - Features Display: 2 x 20 characters Interface: MP²I User memory:

More information

SIPLUS CPU 313C-2DP. Function

SIPLUS CPU 313C-2DP. Function SIPLUS CPU 313C-2DP Function Password protection; a password concept protects the user program from unauthorized access. Block encryption; the functions (FCs) and function blocks (FBs) can be stored in

More information

Product type designation. General information. Supply voltage. Input current

Product type designation. General information. Supply voltage. Input current Data sheet SIMATIC S7-300, CPU 312C COMPACT CPU WITH MPI, 10 DI/6 DO, 2 FAST COUNTERS (10 KHZ), INTEGRATED 24V DC POWER SUPPLY, 64 KBYTE WORKING MEMORY, FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD

More information

General information. Supply voltage

General information. Supply voltage Data sheet SIMATIC S7-300, CPU 313C-2DP COMPACT CPU WITH MPI, 16 DI/16 DO, 3 FAST COUNTERS (30 KHZ), INTEGRATED DP INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 128 KBYTE WORKING MEMORY, FRONT CONNECTOR (1

More information

Siemens AG /24RC 12/24RCo

Siemens AG /24RC 12/24RCo Siemens AG 008 Introduction Micro Automation LOGO!: Technology with a future which simplifies many things The compact, user-friendly and low-cost solution for simple control tasks. For universal applications

More information

Product type designation. General information. Supply voltage

Product type designation. General information. Supply voltage Data sheet SIMATIC S7-300, CPU 313C-2DP COMPACT CPU WITH MPI, 16 DI/16 DO, 3 FAST COUNTERS (30 KHZ), INTEGRATED DP INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 128 KBYTE WORKING MEMORY, FRONT CONNECTOR (1

More information

FEATURES DESCRIPTION FEATURES

FEATURES DESCRIPTION FEATURES FEATURES Two High Speed Counters Two Pulse Train Outputs Two Pulse Width Modulation Outputs 24 Sinking or Sourcing Inputs 16 Outputs 1 RS232 Port 2 RS485 Ports Supports Modbus RTU Protocol Communicate

More information

Data sheet VIPA CPU 115DP (115-6BL22)

Data sheet VIPA CPU 115DP (115-6BL22) Data sheet VIPA CPU 115DP (115-6BL22) Technical data Order no. Type 115-6BL22 VIPA CPU 115DP General information Note - Features Work memory [KB]: 16 Load memory [KB]: 24 Onboard 16x DI / 12x DO / 4x DIO

More information

Data sheet CPU 115 (115-6BL02)

Data sheet CPU 115 (115-6BL02) Data sheet CPU 115 (115-6BL02) Technical data Order no. 115-6BL02 Type CPU 115 General information Note - Features 16 (20) inputs 16 (12) outputs from which are 2 PWM 50 khz outputs 16 kb work memory,

More information

64 kbyte ; 64 KB / 21K instructions RAM (integrated) Yes ; 4 KB: bit memory, counter, times and data

64 kbyte ; 64 KB / 21K instructions RAM (integrated) Yes ; 4 KB: bit memory, counter, times and data Product data sheet SIMATIC S7-300, CPU 315-2 DP CPU WITH INTEGRATED 24 V DC POWER SUPPLY, 64 KBYTE WORKING MEMORY 2ND INTERFACE DP- MASTER/SLAVE Supply voltage Rated voltage/dc permissible range, lower

More information

Programming package STEP 7 V5.2 SP1 or higher with HSP 0126

Programming package STEP 7 V5.2 SP1 or higher with HSP 0126 Product data sheet SIMATIC S7-300, CPU 315F CENTRAL UNIT FOR S7-300F, 192 KB WORKING MEM., 40MM WIDE, 384 BYTES PAE/384 BYTES PAA, 2 INTERFACES: 1 MPI UND 1 DP INTEGRATED 24V DC POWER SUPPLY, MICRO MEMORY

More information

Commander compact. Commander compact Lines displays. System SLIO. System 100V. Lines displays Commander compact 603-1CC CC21.

Commander compact. Commander compact Lines displays. System SLIO. System 100V. Lines displays Commander compact 603-1CC CC21. 0-CC 0-CC Order number 0-CC 0-CC Figure Type CC 0, Commander Compact CC 0DP, Commander Compact, PROFIBUS-DP slave General information Note - - Features x 0 characters, x 0 characters, Integrated PLC-CPU,

More information

Product type designation. General information. Supply voltage. Input current. Power loss

Product type designation. General information. Supply voltage. Input current. Power loss Data sheet SIMATIC S7-300, CPU 315-2DP CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 256 KBYTE WORKING MEMORY 2. INTERFACE DP-MASTER/SLAVE MICRO MEMORY CARD NECESSARY Product type designation

More information

Supply voltage. Input current. Power loss. Memory. Battery. CPU processing times

Supply voltage. Input current. Power loss. Memory. Battery. CPU processing times Data sheet SIMATIC S7-400H, CPU 417H CENTRAL UNIT FOR S7-400H 4 INTERFACES: 1 MPI/DP, 1 DP A. 2 FOR SYNC MODULES 4MB MEMORY (2MB CODE/2MB DATA) Supply voltage Rated value (DC) 24 V DC Input current from

More information

SIPLUS S7-200TD 200. Overview

SIPLUS S7-200TD 200. Overview SIPLUS S7-200TD 200 Overview The user-friendly text display for the S7-200 For operation and monitoring: display of message texts, interventions in the control program, setting of inputs and outputs Direct

More information

General information. Supply voltage. Input current

General information. Supply voltage. Input current Data sheet SIMATIC S7-300, CPU 315F-2DP FAILSAFE CPU WITH MPI INTERFACE INTEGRATED 24V DC POWER SUPPLY, 384 KB WORKING MEMORY, 40MM WIDE, 2. INTERFACE DP- MASTER/SLAVE MICRO MEMORY CARD REQUIRED General

More information

FEATURES DESCRIPTION SPECIFICATIONS

FEATURES DESCRIPTION SPECIFICATIONS KNC-PLC-KS105 - Series FEATURES Four High-Speed Counters, Max 200 khz Four High-Speed Outputs, Max 200 khz 24VDC Power Required 8 Digital Inputs, 8 Digital Outputs 3 Year Lithium Battery for Data Retention

More information

Product type designation. General information. Supply voltage. Input current. Power losses

Product type designation. General information. Supply voltage. Input current. Power losses Data sheet SIMATIC S7-300, CPU317-2 DP, CENTRAL PROCESSING UNIT WITH 1 MBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE DP-MASTER/SLAVE, MICRO MEMORY CARD NECESSARY Product type designation

More information

SIMATIC S7-400, CPU KB WORKING MEMORY (384 KB CODE, 384 KB DATA) 1. INTERFACE MPI/DP 12 MBIT/S 2.IF PROFIBUS DP, 3.

SIMATIC S7-400, CPU KB WORKING MEMORY (384 KB CODE, 384 KB DATA) 1. INTERFACE MPI/DP 12 MBIT/S 2.IF PROFIBUS DP, 3. Product data sheet SIMATIC S7-400, CPU 414-3 768 KB WORKING MEMORY (384 KB CODE, 384 KB DATA) 1. INTERFACE MPI/DP 12 MBIT/S 2.IF PROFIBUS DP, 3.IF FOR IFM CiR - Configuration in RUN CiR synchronization

More information

CPU 317F-2 DP. Page 1603 Mar 2008 Siemens ITS

CPU 317F-2 DP. Page 1603 Mar 2008 Siemens ITS CPU 317F-2 DP Function Password protection; a password concept protects the user program from unauthorized access. Diagnostics buffer; the last 100 errors and interrupt events are saved in a buffer for

More information

CPU 319F-3 PN/DP. Page 1682 Mar 2008 Siemens ITS

CPU 319F-3 PN/DP. Page 1682 Mar 2008 Siemens ITS CPU 319F-3 PN/DP Function Password protection; a password concept protects the user program from unauthorized access. Diagnostics buffer; the last 100 error and interrupt events are stored in a buffer

More information

Data sheet CPU 013C (013-CCF0R00)

Data sheet CPU 013C (013-CCF0R00) Data sheet CPU 013C (013-CCF0R00) Technical data Order no. 013-CCF0R00 Type CPU 013C Module ID - General information Note - Features Technical data power supply Power supply (rated value) Power supply

More information

CPU 412H. Function. Parameterizable properties

CPU 412H. Function. Parameterizable properties CPU 412H Function Block protection: In addition to the keylock switch, a password concept protects the user program from unauthorized access. Integrated HMI services: In the case of HMI devices, the user

More information

o SIPLUS LOGO! MODULAR BASIC VARIANTS

o SIPLUS LOGO! MODULAR BASIC VARIANTS o SIPLUS LOGO! MODULAR BASIC VARIANTS The space-saving basic variants Interface for the connection of expansion modules, up to 24 digital inputs, 16 digital outputs, 8 analog inputs and 2 analog outputs

More information

Product type designation. General information. CiR - Configuration in RUN. Supply voltage. Input current. Power loss. Memory

Product type designation. General information. CiR - Configuration in RUN. Supply voltage. Input current. Power loss. Memory Data sheet SIMATIC S7-400, CPU 417-4 CENTRAL PROCESSING UNIT WITH: 30 MB WORKING MEMORY, (15 MB CODE; 15 MB DATA) 1. INTERFACE MPI 12 MBIT/S, 2. INTERFACE PROFIBUS DP, 3./4. IF IFM MODULES PLUGGABLE Product

More information

Part Number Total I/O Power Voltage Input Voltage Output Type Maximum Digital I/O Maximum Analog I/O V AC Relay 24V DC.

Part Number Total I/O Power Voltage Input Voltage Output Type Maximum Digital I/O Maximum Analog I/O V AC Relay 24V DC. MicroSmart FC6A PLC CPU Module Specifications KEY FEATURES Embedded Ethernet port Embedded SD memory port Modbus TCP and RTU Embedded RS232C/RS485 user selectable Maximum 520 digital I/O Maximum 126 analog

More information

Siemens AG SIMATIC S Micro Controller for Totally Integrated Automation. Catalog ST 70 N April 2009 SIMATIC. Answers for industry.

Siemens AG SIMATIC S Micro Controller for Totally Integrated Automation. Catalog ST 70 N April 2009 SIMATIC. Answers for industry. SIMATIC S7-1200 Micro Controller for Totally Integrated Automation Catalog ST 70 N April 2009 SIMATIC Answers for industry. Related Catalogs SIMATIC NET Industrial Communication IK PI E86060-K6710-A101-B6-7600

More information

STEP 7. Function. Page 1791 Mar 2008 Siemens ITS

STEP 7. Function. Page 1791 Mar 2008 Siemens ITS STEP 7 Function STEP 7 blocks STEP 7 files all user-written programs and all the data required by those programs in blocks. The possibility of calling other blocks within one block, as though they were

More information

General information. Supply voltage. Input current

General information. Supply voltage. Input current Data sheet SIMATIC S7-300 CPU 315-2 PN/DP, CENTRAL PROCESSING UNIT WITH 384 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY

More information

General information. Supply voltage. Input current

General information. Supply voltage. Input current Data sheet SIMATIC S7-300 CPU 317-2 PN/DP, CENTRAL PROCESSING UNIT WITH 1 MB WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY

More information

Motion Control System SIMOTION Controller based Platform. Update Catalog PM 10 September simotion. Update Catalog PM

Motion Control System SIMOTION Controller based Platform. Update Catalog PM 10 September simotion. Update Catalog PM Motion Control System SIMOTION Controller based Platform Update Catalog PM 10 September 2006 simotion s Update Catalog PM 10 2005 1 General Information Overview Design SIMOTION C is the modular controller

More information

General information. Supply voltage. Input current

General information. Supply voltage. Input current Data sheet SIMATIC S7-300 CPU319F-3 PN/DP, CENTRAL PROCESSING UNIT WITH 2.5 MBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE DP-MASTER/SLAVE, 3. INTERFACE ETHERNET PROFINET, WITH 2 PORT

More information

General information. Supply voltage. Input current

General information. Supply voltage. Input current Data sheet SIMATIC S7-300 CPU315F-2 PN/DP, CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY

More information

6ES7151-8AB01-0AB0. 5/18/2011 Siemens Industry IA/DT/BT Service&S. siemens.com/ww/llisapi.dll?func=csl 1/10 ET200S, IM151-8 PN/DP CPU, 192 KB

6ES7151-8AB01-0AB0. 5/18/2011 Siemens Industry IA/DT/BT Service&S. siemens.com/ww/llisapi.dll?func=csl 1/10 ET200S, IM151-8 PN/DP CPU, 192 KB Automation Technology > Automation Systems > Industrial Automation Systems SIMATIC > Distributed I/Os SIMATIC ET200 > ET 200 systems for the cabinet > ET 200S > Interface modules > Interface modules with

More information

TM221M16TG controller M IO transistor PNP spring

TM221M16TG controller M IO transistor PNP spring Characteristics controller M221 16 IO transistor PNP spring Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete output type Discrete

More information

Parameterizable properties The S7 configuration as well as the properties and response of the CPUs can be parameterized using STEP 7:

Parameterizable properties The S7 configuration as well as the properties and response of the CPUs can be parameterized using STEP 7: CPU 315-2 PN/DP Function Password protection; a password concept protects the user program from unauthorized access. Block encryption; the functions (FCs) and function blocks (FBs) can be stored in the

More information

TM241C40U controller M IO transistor NPN

TM241C40U controller M IO transistor NPN Characteristics controller M241 40 IO transistor NPN Main Range of product Product or component type [Us] rated supply voltage 15/12/2018 Modicon M241 Logic controller 24 V DC Discrete input number 24

More information

TM241C24T controller M IO transistor PNP

TM241C24T controller M IO transistor PNP Characteristics controller M241 24 IO transistor PNP Main Range of product Product or component type [Us] rated supply voltage Feb 13, 2018 Modicon M241 Logic controller 24 V DC Discrete input number 14

More information

TM221M32TK controller M IO transistor PNP

TM221M32TK controller M IO transistor PNP Characteristics controller M221 32 IO transistor PNP Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete output type Discrete

More information

100 ms. 30 µs; Time per I/O byte. 24 V DC No; Power supply via system power supply. Not relevant for 400 series (300 series set)

100 ms. 30 µs; Time per I/O byte. 24 V DC No; Power supply via system power supply. Not relevant for 400 series (300 series set) 6ES7412-2XJ05-0AB0 SIMATIC S7-400, CPU 412-2 CENTRAL PROCESSING UNIT WITH: 512 KB WORKING MEMORY, (256 KB CODE, 256 KB DATA), 1. INTERFACE MPI/DP 12 MBIT/S, 2. INTERFACE PROFIBUS DP Product type designation

More information

Product type designation. General information. CiR - Configuration in RUN. Supply voltage. Input current. Power loss. Memory

Product type designation. General information. CiR - Configuration in RUN. Supply voltage. Input current. Power loss. Memory Data sheet SIMATIC S7-400H, CPU 414-5H, CENTRAL UNIT FOR S7-400H AND S7-400F/FH, 5 INTERFACES: 1X MPI/DP, 1X DP, 1X PN AND 2 FOR SYNC MODULES 4 MB MEMORY (2 MB DATA/2 MB CODE) Product type designation

More information

Overview. Application. Function. Technical specifications. Home

Overview. Application. Function. Technical specifications. Home Page 1 of 6 Home Full Navigation Path Siemens Industry Catalogue Automation technology Automation Systems SIMATIC Industrial Automation Systems Controllers SIMATIC S7 modular controllers S7-1200 Signal

More information

Programmable Relay ZEN V2 Units

Programmable Relay ZEN V2 Units Programmable Relay ZEN V2 Units Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty

More information

Data sheet VIPA CPU 214PG (214-2BE03)

Data sheet VIPA CPU 214PG (214-2BE03) Data sheet VIPA CPU 214PG (214-2BE03) Technical data Order. General information Note - 214-2BE03 VIPA CPU 214PG Features Work memory [KB]: 96 Interface [RJ45]: Ethernet PG/OP communication Interface [RS485]:

More information

Display. Control elements

Display. Control elements Data sheet SIMATIC TOUCH PANEL TP 177MICRO FOR SIMATIC S7-200 5.7" BLUE MODE STN DISPLAY CONFIGURABLE WINCC FLEXIBLE 2004 MICRO HSP UPWARDS; CONTAINS OPEN-SOURCE-SW, WHICH IS PROVIDED FREE OF CHARGE. FOR

More information

TM241C40R controller M IO relay

TM241C40R controller M IO relay Characteristics controller M241 40 IO relay Main Range of product Product or component type [Us] rated supply voltage Mar 09, 2017 Modicon M241 Logic controller 100...240 V AC Discrete input number 24

More information

TM241CE24U controller M IO transistor NPN Ethernet

TM241CE24U controller M IO transistor NPN Ethernet Characteristics controller M241 24 IO transistor NPN Ethernet Main Range of product Product or component type [Us] rated supply voltage Mar 09, 2017 Modicon M241 Logic controller 24 V DC Discrete input

More information

Data sheet VIPA CPU 214NET PG (214-2BT13)

Data sheet VIPA CPU 214NET PG (214-2BT13) Data sheet VIPA CPU 214NET PG (214-2BT13) Technical data Order. 214-2BT13 VIPA CPU 214NET PG General information Note - Features Work memory [KB]: 96 Integrated Ethernet CP 243 Interface [RJ45]: active

More information

SIMATIC S Central processing units

SIMATIC S Central processing units SIMATIC S7-1500 Siemens AG 2013 Overview CPU 1511-1 PN PROFINET IO Controller for operating distributed I/O on PROFINET PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under

More information

Product type designation. General information. CiR - Configuration in RUN. Input current. Power loss. Memory

Product type designation. General information. CiR - Configuration in RUN. Input current. Power loss. Memory Data sheet SIMATIC S7-400, CPU 412-2 CENTRAL PROCESSING UNIT WITH: 512 KB WORKING MEMORY, (256 KB CODE, 256 KB DATA), 1. INTERFACE MPI/DP 12 MBIT/S, 2. INTERFACE PROFIBUS DP Product type designation General

More information

TM221M16R controller M IO relay

TM221M16R controller M IO relay Product data sheet Characteristics TM221M16R controller M221 16 IO relay Complementary Main Discrete I/O number 16 Number of I/O expansion module Supply voltage limits Inrush current Power consumption

More information

General information. Configuration control. Display. Control elements. Supply voltage

General information. Configuration control. Display. Control elements. Supply voltage Data sheet SIMATIC S7-1500 COMPACT CPU CPU 1511C-1PN, CENTRAL PROCESSING UNIT WITH WORKING MEMORY 175 KB FOR PROGRAM AND 1 MB FOR DATA, 16 DIGITAL INPUTS, 16 DIGITAL OUTPUTS, 5 ANALOG INPUTS, 2 ANALOG

More information

RIC PROGRAMMABLE INTELLIGENT CONTROLLER

RIC PROGRAMMABLE INTELLIGENT CONTROLLER Section F PROGRAMMABLE INTELLIGENT CONTROLLER intelligent controller is a new type of programmable controller. It is programmed by the use of a Function Block Diagram. The programming of is easier to learn

More information

Data sheet CPU 315SB/DPM (315-2AG12)

Data sheet CPU 315SB/DPM (315-2AG12) Data sheet CPU 315SB/DPM (315-2AG12) Technical data Order no. 315-2AG12 CPU 315SB/DPM General information Note - Features SPEED-Bus - SPEED7 technology 1 MB work memory Memory extension (max. 2 MB) PROFIBUS-DP

More information

Product type designation. Control elements. Installation type/mounting

Product type designation. Control elements. Installation type/mounting Datasheet SIMATIC HMI KP32F PN, KEY PANEL, 32 SHORT-STROKE KEYS WITH MULTI-COLOR LED'S, PROFINET INTERFACES WITH PROFISAFE, 16DI+16DI/DO, 4 SAFETY DI PINS, 24V DC LOOP THROUGH CONFIGURABLE FROM STEP7 V5.5

More information

TM221ME16T controller M IO transistor PNP Ethernet

TM221ME16T controller M IO transistor PNP Ethernet Characteristics controller M221 16 IO transistor PNP Ethernet Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete output type

More information

General information. Configuration control. Display. Control elements. Supply voltage

General information. Configuration control. Display. Control elements. Supply voltage Data sheet SIMATIC S7-1500, CPU 1516-3 PN/DP, CENTRAL PROCESSING UNIT WITH WORKING MEMORY 1 MB FOR PROGRAM AND 5 MB FOR DATA, 1. INTERFACE: PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE: ETHERNET, 3. INTERFACE:

More information

SIMATIC S /4 Central processing units 4/4 Compact CPUs 4/21 Standard CPUs 4/43 Technology CPUs 4/51 Fail-safe CPUs

SIMATIC S /4 Central processing units 4/4 Compact CPUs 4/21 Standard CPUs 4/43 Technology CPUs 4/51 Fail-safe CPUs Siemens AG 2007 /2 Introduction / Central processing units / Compact CPUs /21 Standard CPUs /3 Technology CPUs /51 Fail-safe CPUs /6 SIPLUS central processing units /6 SIPLUS Compact CPUs /76 SIPLUS Standard

More information

TM221CE40R controller M IO relay Ethernet

TM221CE40R controller M IO relay Ethernet Characteristics controller M221 40 IO relay Ethernet Main Range of product Product or component type [Us] rated supply voltage Jan 6, 2019 Modicon M221 Logic controller 100...240 V AC Discrete input number

More information

Data sheet CPU 315SB/DPM (315-2AG12)

Data sheet CPU 315SB/DPM (315-2AG12) Data sheet CPU 315SB/DPM (315-2AG12) Technical data Order no. 315-2AG12 CPU 315SB/DPM General information Note - Features SPEED-Bus - SPEED7 technology 1 MB work memory Memory extension (max. ) PROFIBUS-DP

More information

TM241CE24T controller M IO transistor PNP Ethernet

TM241CE24T controller M IO transistor PNP Ethernet Product data sheet Characteristics TM241CE24T controller M241 24 IO transistor PNP Ethernet Complementary Main Discrete I/O number 24 Number of I/O expansion module Supply voltage limits Inrush current

More information

Data sheet VIPA CPU M13C (M13-CCF0000)

Data sheet VIPA CPU M13C (M13-CCF0000) Data sheet VIPA CPU M13C (M13-CCF0000) Technical data Order no. M13-CCF0000 Type VIPA CPU M13C Module ID - General information Note - Features Technical data power supply Power supply (rated value) Power

More information

Distributed I/Os SIMATIC ET 200

Distributed I/Os SIMATIC ET 200 Distributed I/Os SIMATIC ET 200 /2 SIMATIC ET 200S /2 Introduction /4 IM 151-1 interface modules /7 IM 151-3 PN interface modules /9 IM 151-7 CPU interface modules /12 Master interface module for IM 151-7

More information

TM221CE24T controller M IO transistor PNP Ethernet

TM221CE24T controller M IO transistor PNP Ethernet Characteristics controller M221 24 IO transistor PNP Ethernet Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete output type

More information

TM241CE24T controller M IO transistor PNP Ethernet

TM241CE24T controller M IO transistor PNP Ethernet Characteristics controller M241 24 IO transistor PNP Ethernet Main Range of product Product or component type [Us] rated supply voltage Apr 10, 2018 Modicon M241 Logic controller 24 V DC Discrete input

More information