BACnet Controller for General-purpose Building Applications

Transcription

1 Specifications BACnet Controller for General-purpose Building Applications General Model WJ-1101 is the BACnet controller to be used for a wide range of building applications such as air-conditioning and plumbing. Model WJ-1101 provides excellent controls suitable for your building with scalable inputs and outputs (I/Os) and configurable control applications. s () and control applications can be added to Model WJ-1101 for a change in operation or for a retrofit, offering high extensibility. Features Open protocols for high connectivity: Model WJ-1101 supports BACnet/IP. Its RS-485 communication allows to connect BACnet MS/TP, Modbus ASCII, and Modbus RTU devices. Modifiable I/O combinations: Model WJ-1101 has 24 I/Os including universal inputs (UIs) for inputs of current, voltage, resistance (Pt100 Ω/Pt1000 Ω), and open collector. Besides these I/Os, Model WJ-1101 accepts up to 20 I/O modules () in any combination through the Ethernet connection. s away from Model WJ-1101: Ethernet connection enables to leave distance between s and Model WJ s mounted near field equipment thus accessible to Model WJ Visible I/O status: The LEDs of Model WJ-1101 for digital inputs (DIs), digital outputs (DOs), and UIs show the status of the feedback input from field equipment and the on/off output to field equipment. Controls configured for your instrumentation: To fulfill the instrumentation requirements of your building, Model WJ-1101 provides temperature and humidity controls and energy-saving operations through CO2 control, outdoor-air cooling control, etc. Control applications added and modified during operation: Model WJ-1101 allows the following even while it is in operation. - Adding another control application to Model WJ Modifying control applications in Model WJ You can therefore add a new control application and modify an existing control application without interrupting equipment operation. Manual override: The manual override function enables you to manually change the input and output data. This helps you to take temporary action against a failure. Autonomous distributed control: To reduce the risks of failures, Model WJ-1101 independently operates even when a part of the building management system (BMS) fails. 1

2 System Architecture Supervisory device Engineering tool Ethernet (BACnet/IP and multi-protocols)* 1 Supervisory network Switching hub BACnet Controller Model WJ-1101 Infilex VC Model WY5706C Ethernet (proprietary)* 2, * 4 RS-485 (BACnet MS/TP): Max. 50 devices and 1,200 m * 5, * 6 Infilex VC Model WY5706C Switching hub Switching hub RS-485 (Modbus RTU/Modbus ASCII): Max. 31 devices and 1,200 m * 5, * 7 Infilex VC Model WY5706C Third-party Modbus device * 3, * 4 Third-party Modbus device Third-party Modbus device Note: *1 Maximum wiring length between each device and the switching hub must be 100 m. *2 Because of the daisy-chained Ethernet locally connecting s, a switching hub is not required between adjacent devices (between Model WJ-1101 and its adjacent or between adjacent s). This connection between Model WJ-1101 and the I/O modules is called "local I/O network." The maximum wiring length between adjacent devices on the local I/O network must be 100 m. *3 The connection between Model WJ-1101 and s through the Ethernet of the supervisory and primary device networks is called "remote I/O network." Each on the remote I/O network requires a switching hub. Model WJ-1101 communicates with the s using our proprietary protocol. *4 Model WJ-1101 allows a maximum of 20 s to connect on the local I/O network and on the remote I/O network. *5 Model WJ-1101 as a primary device supports BACnet MS/TP and Modbus over RS-485 for communicating with the secondary devices. The maximum wiring length of each line of the secondary device network must be 1,200 m. BACnet MS/TP or Modbus communication is selectable through the S/W settings. *6 Model WJ-1101 allows a maximum of 50 MS/TP devices to connect on a single BACnet MS/TP line of the secondary device network. These 50 devices can include a maximum of 20 third-party devices. For connecting third-party devices only, Model WJ-1101 allows a maximum of 31 MS/TP devices to connect on a single BACnet MS/TP line of the secondary device network. *7 Model WJ-1101 allows a maximum of 31 Modbus devices to connect on a single Modbus line of the secondary device network. Primary device network Secondary device network Figure 1. System architecture example Model Number Model number WJ-1101W0000 Description BACnet controller for general-purpose building applications - Ethernet (BACnet/IP) communication V AC 240 V AC power 2

3 Specifications Basic specifications Item Specification Power Rated voltage range 100 V AC 240 V AC at 50 Hz/60 Hz Allowable voltage range 85 V AC 264 V AC at 50 Hz/60 Hz ± 3 Hz RAM and RTC backup battery Lithium battery (not rechargeable) CPU 32 bit Memory SDRAM: 256 MB, flash ROM: 32 MB, SRAM: 2 MB Communication Ethernet (LAN 0) Protocol BACnet /IP Communication speed 100 Mbps/1000 Mbps Type of connection Autonegotiation, auto MDI/MDI-X Ethernet for Protocol Proprietary protocol Communication speed 100 Mbps connection Type of connection Auto MDI/MDI-X (LAN 1, LAN 2) Number of s Max. 20 s for one Model WJ-1101 RS-485 Protocol BACnet MS/TP or Modbus (selected through S/W setting) Number of lines 2 Communication speed 4.8 kbps/9.6 kbps/19.2 kbps/38.4 kbps/76.8 kbps (selected through S/W setting) Number of devices 50 devices (31 devices) per line* 1 Housing material, color Modified PPE, black Weight Approx. 800 g Mounting On a DIN rail or with screws Mounting location In a control panel Environmental Rated operating Ambient temperature 0 C 50 C conditions conditions Ambient humidity 10 %RH 90 %RH (non-condensing) Vibration 5.9 m/s 2 or less at 10 Hz 150 Hz Transport and Ambient temperature -20 C 60 C storage conditions Ambient humidity 5 %RH 95 %RH (non-condensing) Vibration (for transport) 9.8 m/s 2 or less at 10 Hz 150 Hz Vibration (for storage) 5.9 m/s 2 or less at 10 Hz 150 Hz CPU: central processing unit MDI: medium dependent interface MDI-X: medium dependent interface crossover PPE: polyphenylene ether RAM: random-access memory ROM: read-only memory RTC: real-time clock SDRAM: synchronous dynamic random-access memory SRAM: static random-access memory Note: *1 The maximum number of devices that Model WJ-1101 allows is 50 for our own devices or 31 for third-party devices. 3

4 Input/output specifications Item Specification Digital input Number of inputs 4 Voltage/current 24 V DC typ./5 ma DC typ. Type of output from a Dry contact or open collector device in connection Pulse counting* 1 10 Hz or less Universal input Number of inputs 8 Voltage input Range 0 V DC 10 V DC/2 V DC 10 V DC/0 V DC 5 V DC/1 V DC 5 V DC Impedance 1 MΩ typ. Current input Range 4 ma 20 ma Impedance 100 Ω typ. Resistance Type of output from a Pt100, Pt1000 temperature detector (RTD) input sensor in connection Measuring range of a Pt100 sensor 0 C 50 C/0 C 100 C/0 C 200 C/-20 C 80 C/-20 C 30 C/ -50 C 100 C/-100 C 50 C Measuring range of a 0 C 50 C/0 C 100 C/-20 C 80 C/-20 C 30 C/-50 C 100 C Pt1000 sensor Digital input Voltage/current 5 V DC typ./ 1.5 ma DC typ. Type of output from a device in connection Open collector Digital output Number of outputs 6 Relay output Type of output Relay, N.O.(normally open) contact Contact rating Max. 24 V AC, 0.5 A (Inductive load: cos = 0.4 or greater Minimum applicable load 5 V DC, 10 ma DC Analog output Number of outputs 6 Voltage Range 0 V DC 10 V DC/2 V DC 10 V DC/0 V DC 5 V DC/1 V DC 5 V DC output Load resistance Min. 10 kω Current output Range 4 ma 20 ma Load resistance Max. 500 Ω Note: *1 Pulse counting for the digital inputs must meet the following pulse width and interval. Min. 30 ms Min. 100 ms Min. 30 ms 4

5 Dimensions Figure 2. Outside dimensions (mm) 5

6 Infilex is a trademark of Azbil Corporation in Japan or in other countries. BACnet is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). Modbus is a trademark or a registered trademark of Schneider Electric in France, the USA and other countries. Specifications are subject to change without notice. Building Systems Company Rev. 1.0 Apr AX-230E 6