UL Standards Update EES Conference. Scott Jezwinski UL LLC July 13, 2016
|
|
- Melina Melton
- 5 years ago
- Views:
Transcription
1 UL Standards Update 2016 EES Conference Scott Jezwinski UL LLC July 13, 2016
2 Agenda Inverters Energy Storage Cybersecurity 2
3 Inverter Standards for Power Conversion and Grid Interconnection USA UL1741 (includes Supplement SA for advanced inverters) UL UL General (published) - UL Inverter specific (in process) IEEE 1547 and IEEE Canada CSA C22.2 No (present) CSA (future) - Allows for use of IEEE 1547 and
4 UL1741SA Consensus Process Standards Development Organization Standards Technical Panel 26 Producers 5 Users 7 Government 7 AHJ 13 Supply chain 19 General 4 Testing & Stds Proposal Anyone UL CSDS system Preliminary Review STP Standard Subscribers Ballot closed on 6/16/2016 adoption approved but 200+ comments need to be resolved & recirculated expect publication in late August/early September We are here Submitter s Review of Comments Considers comments May revise proposal Ballot STP votes Standard subscribers review Public review Comment Resolution STP resolves all comments Re-ballot Changes to proposal based on comments STP confirms or changes vote Adoption or Failure Consensus needed to adopt Proposal fails if consensus is not achieved 4
5 UL1741SA for Grid Support Utility Interactive Inverters Mandatory Anti-Islanding L/HVRT L/HFRT Must Trip Test Normal Ramp Rate Soft-Start Ramp Rate Fixed Power Factor Volt/Var Mode Other / Optional Communications Interface Data Model Monitor Alarms Monitor DER Status and Output Frequency Watt 5
6 Agenda Inverters Energy Storage Cybersecurity 6
7 Energy Storage Standards UL Safety Standards: UL 9540, Energy Storage Systems and Equipment (ANSI in progress) ANSI UL 1973, Batteries for Use in Light Electric Rail (LER) and Stationary Applications UL 1974, Evaluation Of Batteries For Repurposing (under development) ANSI UL 1741, Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources IEC TC 120 Standards (under development): IEC (terminology) Electrical Energy Storage (EES) systems - Part 1: Terminology IEC (performance) Electrical Energy Storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification IEC (planning and installation) Electrical Energy Storage (EES) systems - Part 3-1: Planning and installation- General specification IEC (environment) Electrical Energy Storage (EES) systems - Part 4-1: Guidance on environmental issues - General specification IEC (safety) Electrical Energy Storage (EES) systems - Part 5-1: Safety considerations - General specification 7
8 UL Scope Safety of energy storage systems: Includes energy storage systems that are: Standalone to provide energy for local loads For use in utility-interactive applications in compliance with UL1741, IEEE 1547 and IEEE or Other applications intended to provide grid support functionality, Able to perform multiple operational modes May include balance of plant and other ancillary equipment of the system 8
9 Overview of UL 9540 Requirements Types of Energy Storage Systems Electrochemical UL 1973 Chemical CSA FC1, NFPA 2, UL 2200, etc. Mechanical (fly wheel, CAES systems - under development) ASME B & PV Code, ASME B31 piping codes UL 9540 moving parts tests Thermal (Thermal heat system under development) ASME B & PV Code, ASME B31 piping codes 9
10 UL Overview ES system technology tests Electric tests Normal operations Dielectric voltage withstand Grounding and bonding Insulation resistance Mechanical tests Over speed test Faulted securement test Broken part Fluid containment tests Leakage Strength Environmental tests 10
11 Agenda Inverters Energy Storage Cybersecurity 11
12 UL 2900 Vulnerabilities and Exploits Software Weaknesses Security Controls 12
13 UL 2900 Standards General Product Requirements Industry Product Requirements General Process Requirements UL Software Cybersecurity UL Healthcare Systems UL Industrial Control Systems UL General Process Requirements UL SDLC UL X TBD 13
14 What is UL CAP? 14
15 THANK YOU.
CERTIFICATE OF COMPLIANCE
Issued to: SMA Solar Technology AG Sonnenallee 1 34266 Niestetal GERMANY This is to certify that representative samples of STATIC INVERTERS, CONVERTERS AND ACCESSORIES FOR USE IN INDEPENDENT POWER SYSTEMS
More informationC E R T I F I C A T E O F C O M P L I A N C E
Issued to: Huawei Technologies Co., Ltd. Administration Building Headquarters of Huawei Technologies Co., Ltd. Bantian, Longgang District Shenzhen Guangdong 518129 CHINA This is to certify that representative
More informationBifacial Module Certification Requirements
UL Bifacial Module Certification Requirements Kent Whitfield, Principal Engineer Copyright 2017 UL LLC. All rights reserved. No portion of this material may be reprinted in any form without the express
More informationListing Constructional Data Report (CDR)
Listing Constructional Data Report (CDR) 1.0 Reference and Address Report Number 160114055GZU-001 Original UL SUBJECT 9540 Issued: 2014/06/30 Ed: 1 Outline Of Investigation Energy Storage Systems And Equipment
More informationUL 508 A standard-compliant design of industrial control panel
UL 508 A standard-compliant design of industrial control panel Axel Jöhnke System Architecture Expert 14-15 SEPTEMBER 2011, MUNICH Agenda www.infoplc.net Origin and Comprehension Organizations Certificates
More informationConnecting the Dots: How inverters have, can, and should be used for ancillary services. Donny Zimmanck Principal Engineer Enphase Energy
Connecting the Dots: How inverters have, can, and should be used for ancillary services Donny Zimmanck Principal Engineer Enphase Energy History of Inverter Participation Sparse grid connected systems
More information9926 Series Branch Rated Circuit Breakers AC Version
Branch Rated AC Version Hydraulic Magnetic Single pole and double pole versions 20/240 VAC, 50/60 Hz Up to 25A Just 3 mm wide Mounts on 35mm DIN-rail UL 489 listed, CSA C22.2 No. 5-02, CE VDE Ordering
More informationDistributor Information Bulletin Distributed Generation (Codes, Publications & Standards)
GENERAL: This bulletin highlights some of the most commonly referenced technical codes, publications and standards when reviewing a connection to under the Feed-in Tariff (FIT) Program, including micro-fit.
More informationBulletin Installation of Solar Photovoltaic Systems Section 50; Rules: , , ; Tables 11 and 19 Issued July 2010
Ontario Electrical Safety Code - Bulletins 50-1-0 Bulletin 50-1-0 Installation of Solar Photovoltaic Systems Section 50; Rules: 84-020, 84-024, 84-030; Tables 11 and 19 Issued July 2010 Scope (1) Introduction
More informationSRI LANKA STANDARD CODE OF PRACTICE FOR GRID CONNECTED PHOTOVOLTAIC POWER SYSTEMS SLS 1522:2016
SRI LANKA STANDARD CODE OF PRACTICE FOR GRID CONNECTED PHOTOVOLTAIC POWER SYSTEMS SLS 1522:2016 BY H S W Karunaratne Assistant Director - Engineering Sri Lanka Standards Institution. 1 DEFINITIONS Ac module:
More informationDevelopment System (UL CSDS)
UL Collaborative Standards Development System (UL CSDS) s UL CSDS Basics What is UL CSDS? The UL Collaborative Standards Development System (CSDS) was created to further enhance the maintenance of UL's
More informationIntroduction Circuit Protection
Introduction Circuit Protection Weidmuller s DIN-rail mounted circuit breakers are available for use in applications where circuit protection must be able to distinguish between circuit overloads and short
More informationSWITCHING POWER SUPPLY SPECIFICATION TEMPLATE
SWITCHING POWER SUPPLY SPECIFICATION TEMPLATE SWITCHING POWER SUPPLY 1.0 Scope 2.0 Input requirements 2.1 Voltage 2.2 Stead-state current 2.3 Inrush current 3.0 Output requirements 3.1 DC load requirements
More informationPCM SLK- Series Inverter Specification
PCM SLK- Series Inverter Specification Page 1 of 7 General Specification Introduction Environment The inverters are designed to be outdoor types. Models In field applications, the power demands from 1.5kW
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationDESIGN BASIS VERIFICATION AND PRESERVICE TESTING CONSIDERATIONS FOR OM CODE MANDATORY APPENDIX III
Proceedings of the ASME/NRC 2017 13th Pump and Valve Symposium PVS2017 July 17-18, 2017, Silver Spring, Maryland PVS2017-3504 DESIGN BASIS VERIFICATION AND PRESERVICE TESTING CONSIDERATIONS FOR OM CODE
More informationApplication Note on Modifying Disconnect Settings for Xantrex GT Series Single Phase Inverters and Conext TX Series Inverters
Application Note on Modifying Disconnect Settings for Xantrex GT Series Single Phase Inverters and Conext TX Series Inverters 976-0312-01-01 Revision A DANGER RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION, AND
More informationUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL
UL 943 ISBN 0-7629-1123-9 Ground-Fault Circuit- Interrupters FEBRUARY 1, 2006 UL 943 tr1 Underwriters Laboratories Inc. (UL) 333 Pfingsten Road Northbrook, IL 60062-2096 UL Standard for Safety for Ground-Fault
More informationPlease use the Q & A utility to ask us any questions concerning the material being presented.
Webinar Notes Please use the Q & A utility to ask us any questions concerning the material being presented. Please contact Brittany Socha on the chat line or email Brittany.socha@ikonixusa.com if you would
More informationNational Fire Protection Association. 1 Batterymarch Park, Quincy, MA Phone: Fax:
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org M E M O R A N D U M TO: NEC Code-Making Panel 14 FROM: Kimberly Shea,
More information.2 Section General Commissioning (Cx) Requirements. .3 Section Common Work Requirements - Electrical
Issued for Review Section 26 28 16.01 Air Circuit Breakers Page 1 of 7 PART 1 GENERAL 1.1 GENERAL.1 This specification serves to define requirements for a replacement of low voltage circuit breaker of
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2012-02-09 Page 1 of 13 Report Reference # E116994-A76-UL UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES60601-1:2005, 3rd ed. (Medical Electrical Equipment - Part 1: General Requirements
More informationTRANSMISSION ENGINEERING STANDARDS SUBSTATIONS
This standard was reviewed and approved by key managers on. Officer approval of this revision is not required. 1.0 SCOPE 1.1 This guide applies to the interconnection of a generating plant with the Oncor
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
More informationPower Measurements. Technology Consulting
Technology Consulting William H. Hardy, PhD 565 Glen Abbey Blvd Knoxville, TN 37934 Cell: (865) 279-1090 www.powermeasurements.com Bill.Hardy@PowerMeasurements.com ANSI Standards Update June 2012 The Presenter
More informationInverter Advanced Functions, Operability and Communication Update
Inverter Advanced Functions, Operability and Communication Update Tom Key and Brian Seal tkey@epri.com bseal@epri.com UWIG Solar Integration Workshop Maui, HI October 11, 2011 Smart Grid Vision for Advanced
More informationRequirements for machine approval in North America under the new NEC 2017
Requirements for machine approval in North America under the new NEC 2017 2 Rittal NEC 2017 The NEC 2017 introduces increased requirements for SCCR Rittal has long been prepared Rittal always responds
More informationPRODUCT SPECIFICATION
RECEPTACLE 1.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME
More informationPierre Sebellin. Systems Technical Officer International Electrotechnical Commission
Pierre Sebellin Systems Technical Officer International Electrotechnical Commission Introduction IEC is a global organization that publishes consensus-based international Standards and manages Conformity
More informationAgenda and General Information
Agenda and General Information IEEE 802.3cb Task Force 2.5 Gb/s and 5 Gb/s Backplane Dan Smith, Chair Seagate Technology Geneva, Switzerland, Jan-2018 Agenda Welcome and Introductions Approve TF Meeting
More information1492-SP Supplementary Protectors
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Approval marks are easily visible on dome Terminal design helps prevent wiring misses Scratch-
More informationUtility Interconnection. Highlights of the New Fast Track Process Proposed by FERC and Changes to IEEE 1547
Utility Interconnection Highlights of the New Fast Track Process Proposed by FERC and Changes to IEEE 1547 1 4/16/2013 Agenda Review of Status of Distributed Energy Resources Standards Changes Review of
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS Section PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE STANDARDS 2.1 Regulatory
More informationCPV STANDARDS: UPDATE OF THE CURRENT TESTING STANDARDS AND FUTURE DEVELOPMENTS
CPV STANDARDS: UPDATE OF THE CURRENT TESTING STANDARDS AND FUTURE DEVELOPMENTS Paul F. Robusto, PhD Intertek Testing and Certification, Inc. 25791 Commercenter Drive, Lakeforest, CA 92630 paul.robusto@intertek.com
More informationE1 Plus Electronic Overload Relay
ROCKWELL AUTOMATION PROCUREMENT SPECIFICATION PROCUREMENT SPECIFICATION E1 Plus NOTICE: The specification guidelines in this document are intended to aid in the specification of products. Specific installations
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2014-10-31 Page 1 of 18 Report Reference # E182560-A123-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: ANSI/AAMI ES60601-1 (2005 + C1:09 + A2:10)(Medical Electrical Equipment
More informationSERIES L: CONSTRUCTION, INSTALLATION AND PROTECTION OF CABLES AND OTHER ELEMENTS OF OUTSIDE PLANT
International Telecommunication Union ITU-T L.1201 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (03/2014) SERIES L: CONSTRUCTION, INSTALLATION AND PROTECTION OF CABLES AND OTHER ELEMENTS OF OUTSIDE
More informationMultiple Patient Leakage and Mains on AP Leakage Measurements with the and Scanner
Chroma Systems Solutions, Inc. Multiple Patient Leakage and Mains on AP Leakage Measurements with the 902 and 5000-0 Scanner 902 Series Electrical Safety Analyzer, 5000-0 Scanner Keywords 902 Series Electrical
More informationALLTEC PROTECTION PYRAMID TM FOR PHOTOVOLTAIC SOLAR FIELD
64 Catalyst Drive Canton, North Carolina, 28716 USA +1.828.646.9290 +1.828.646.9527 (Fax) +1.800.203.2658 (Toll Free) www.alltecglobal.com ALLTEC PROTECTION PYRAMID TM FOR PHOTOVOLTAIC SOLAR FIELD Photovoltaic
More informationRefurbishment of Switchgear and Switchgear Devices
White Paper Refurbishment of Switchgear and Switchgear Devices Low and Medium Voltage Products Introduction There are many suppliers who suggest to users that switchgear assemblies, circuit breakers, and
More informationPUBLICLY AVAILABLE SPECIFICATION
IEC/IEEE/PAS 63547 PUBLICLY AVAILABLE SPECIFICATION Edition 1.0 2011-09 Interconnecting distributed resources with electric power systems INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE V ICS 29.240.99
More informationStandard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Description of Current Draft
More informationAn Urgent Bulletin from CSA Group
An Urgent Bulletin from CSA Group Photovoltaic Equipment No. 5 Date: September 21, 2015 See Attachment 1 for Effective Dates. See Attachment 1 for Application Due Dates Announcing: Publication of List
More informationOperational Equipment Power and Environment Standard
Operational Equipment Power and Environment Standard Contents 1 Scope -3 2 Invitation to Tender Response -3 3 Generic Requirements for Equipment Environment -3 3.1 Environmental Conditions -3 3.2 Specific
More informationThe Drive To Transactive Energy
The Drive To Transactive Energy Building the Enabling Network for DER Participation Leveraging the IEEE 1547 based Grid Interconnection for Transactive Energy Services Presented By: Paul Heitmann Businovation,
More informationENGINEERING AND SERVICES FIRM THAT SPECIALIZES IN HYDROELECTRIC POWER AND CONTROL SYSTEM DESIGN, OUR TEAM OF PROFESSIONALS HAVE WORKED TOGETHER
smallhydro PRIME ENGINEERING LIMITED IS AN ELECTRICAL ENGINEERING AND SERVICES FIRM THAT SPECIALIZES IN HYDROELECTRIC POWER AND CONTROL SYSTEM DESIGN, IMPLEMENTATION AND MAINTENANCE. OUR TEAM OF PROFESSIONALS
More information802.3CG OVERVIEW 10 MB/S SINGLE PAIR. G. Zimmerman CME Consulting ETHERNET
802.3CG OVERVIEW 10 MB/S SINGLE PAIR G. Zimmerman CME Consulting ETHERNET WHERE WE BEGAN From IEEE 802.3 Call for Interest, Consensus Building Presentation, July 2016 11/2/2017 G. Zimmerman - CME Consulting,
More informationNew SACE Emax 2 for UL 1066 From Circuit Breaker to Power Manager
New SACE Emax 2 for UL 1066 From Circuit Breaker to Power Manager 2 1SXP200002B0201 New SACE Emax 2 for UL 1066 Circuit breakers switch power SACE Emax 2 manages it. SACE Emax 2 is the new benchmark of
More informationKUANTECH (SHEN ZHEN) COMPANY LIMITED KSAFD W1UK
1 GENERAL... 2 1.1 Description... 2 2 INPUT REQUIREMENTS... 2 2.1 Input Conditions... 2 2.2 AC Inrush Current... 2 3 OUTPUT REQUIREMENTS... 2 4 MECHANICAL... 3 4.1 Enclosure And Layout... 3 4.2 Input and
More informationEFASOLAR PVStation Solutions
www.efacec.com EFASOLAR PVStation Solutions EFASOLAR PVStation EFASOLAR PVStation Solutions 0,5 MW 1 x EFASOLAR 50 0,50 MW 1 x EFASOLAR 500M 1 MW 1,46 MW Efacec is a century-long experienced company in
More informationABL8BBU24400 battery control module V DC - 24 V - 40 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 40 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Complementary
More informationSwitching Power Supply S82J. Ordering Information. Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W
Switching Power Supply Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W Models range from 10 to 600 W UL 508 approval on 100-W 150-W, 300-W, and 600-W models Wide range of output
More informationAtras Network Communications
Atras Network Communications Guide to Information and Communications Technology (ICT) Standards developed and published by the Telecommunications Industry Association (TIA) The Telecommunications Industry
More informationEnergy efficiency management and environmental impact assessment for ICTs
http://eustandards.in/ Energy efficiency management and environmental impact assessment for ICTs Beniamino Gorini (ETSI TC-EE chairman) 2 Contents What is required to define sustainable ICT products/networks/services
More informationTRINIDAD AND TOBAGO BUREAU OF STANDARDS
TRINIDAD AND TOBAGO BUREAU OF STANDARDS STANDARDS WORK PROGRAMME OCTOBER 2016 MARCH 2017 (STATUS AS OF OCTOBER 2016) Date: 2017-02-24 TRINIDAD AND TOBAGO BUREAU OF STANDARDS Location: 1-2 Century Drive
More informationINSTALLATION AND COMMISSIONING CHECKLIST
Installation environment Ensure installation site meets environmental and physical constraints. [ ] Good [ ] Poor 2 Unpacking Check inverter condition after unpacking. [ ] Good [ ] Poor 3 Mounting bracket
More informationStandards Update Notice (SUN) Issued: August 11, 2017
Standard Information Standard Number: UL 621 Standard Name: Ice Cream Makers Standard Edition and Issue Date: 7 th Edition Dated May 7, 2010 Date of Revision: February 15, 2017 Date of Previous Revision
More informationIEEE P1564 Voltage Sag Indices Task Force Meeting
100 Va Vb Vc Voltage (%) 50 0-50 -100-2 0 2 4 6 8 10 12 Time (c) IEEE P1564 Voltage Sag Indices Task Force Meeting Daniel Sabin Electrotek Concepts, Inc. d.sabin@ieee.org 23 July 2013 Vancouver, British
More informationDRAFT. Application Note: Modbus/RS485 Wiring for Conext Core XC Series Inverters. 1.0 Introduction DANGER. 1.1 Related Documents
Application Note: Modbus/RS485 Wiring for Conext Core XC Series Inverters AP-XC-025 Revision B 1.0 Introduction DANGER RISK OF ELECTRIC SHOCK, EXPLOSION, ARC FLASH, AND FIRE This Application Note is in
More informationPRODUCT SPECIFICATION
RECEPTACLE.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2. PRODUCT NAME AND
More informationScanner 2000 Steam Mass Flow Transmitter
3352051/2 IM-P335-24 MI Issue 2 Scanner 2000 Steam Mass Flow Transmitter Installation and Maintenance Instructions 1. Safety information 2. Mechanical installation 3. Configuring software 4. Wiring procedures
More informationInverter grounding and overvoltages. Michael Ropp, Ph.D., P.E. Northern Plains Power Technologies
1 Inverter grounding and overvoltages Michael Ropp, Ph.D., P.E. Northern Plains Power Technologies 2 Scope This presentation will focus on inverter-based DG Includes all DC and variable-frequency primary
More informationIEEE Transformers Committee Coordination of Standards with the International Electrotechnical Commission (IEC)
IEEE Transformers Committee Coordination of Standards with the International Electrotechnical Commission (IEC) 1. Overview The IEEE Transformers Committee has developed this paper to assist its subcommittees/working
More informationFully-Automated Multi-Function Electrical Safety Compliance Analyzers
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) OMNIA Series Fully-Automated Multi-Function Electrical Safety Compliance Analyzers U.S. Patent Nos. (6,054,865, 6,011,398,
More informationABL1RPM24100 regulated SMPS - single phase V input - 24 V output W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 240 W Complementary Input voltage limits Network frequency limits Inrush current Main Range of product Product or component
More informationPRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
More informationIEEE GBASE-T T Study Group Agenda and General Information. Vancouver, BC January 9, 2003
IEEE 802.3 10GBASE-T T Study Group Agenda and General Information Vancouver, BC January 9, 2003 Agenda Welcome and Introductions Select Recording Secretary Goals for this Meeting Reflector and Web Ground
More informationV3.0 Networked Lighting Controls Technical Requirement Release. June 21, 2018
V3.0 Networked Lighting Controls Technical Requirement Release June 21, 2018 Agenda 1. Introduction 2. Energy Monitoring 3. New Documentation Requirements 4. Product Families 5. DC/PoE 6. Cybersecurity
More informationABL1REM24100 regulated SMPS - single phase V input - 24 V output W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 240 W Complementary Input voltage limits Network frequency limits Inrush current Main Range of product Product or component
More informationSwitching Power Supply S8E1. Ordering Information. Compact and Economical Switching Power Supply
Switching Power Supply Compact and Economical Switching Power Supply Models range from 10 to 50 W Open-frame and covered types Wide range of output voltage: 5-, 12-, 15- and 24-V models UL, CSA approved
More informationIEEE P1564 Voltage Sag Indices Task Force Meeting
IEEE P1564 Voltage Sag Indices Task Force Meeting Dan Sabin Electrotek Concepts, Inc. d.sabin@ieee.org January14, 2013 Memphis, Tennessee, USA IEEE P1564 Task Force Meeting Agenda Introductions Patent
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationSENSIBLE Project Technical innovations
Energising Communities: Nottingham s Energy Revolution SENSIBLE Project Technical innovations Filipe Guerra EDP Labelec October 18th, 2018 SENSIBLE Overview and highlights Scope Demonstration of energy
More informationCGI Deliverables Approval and Maintenance Process
CGI Management CGI Deliverables Approval and Maintenance Process Approved 02 September 2011 1. Introduction The following describes the official approval and maintenance process for the Common Global Implementation
More informationOperating instructions IO-Link master CabinetLine AL19xx
Operating instructions IO-Link master CabinetLine AL19xx 80273036/00 02/2018 1 Preliminary note Technical data, approvals, accessories and further information at www.ifm.com. 2 Safety instructions Read
More informationProject Update on PV AFCI, PV Plastics, US Adoption of IEC 61730
Project Update on PV AFCI, PV Plastics, US Adoption of IEC 61730 Evelyn Butler, Underwriters Laboratories Tim Zgonena, Underwriters Laboratories October 30, 2009 PV Arc Fault Interrupter (AFCI) The PV
More informationSafety Control. FS1A Multi-function Safety Relay. Optional Parts. Connecting Tool. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide
Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2017-04-20 Page 1 of 21 Report Reference # E182560-V4-S73 UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES60601-1 (2005/(R)2012 + A1:2012, C1:2009/(R)2012 + A2:2010/(R)2012) - Amendment
More informationFully-Automated, Multi-Functional Electrical Safety Compliance Analyzers
Fully-Automated, Multi-Functional Electrical Safety Compliance Analyzers Designed to Meet Safety Agency Standards such as UL, CSA, IEC, VDE, TÜV and the European Norms including the Low Voltage Directive
More informationNational Fire Protection Association. 1 Batterymarch Park, Quincy, MA Phone: Fax:
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org M E M O R A N D U M TO: Code-Making Panel 5 FROM: Kimberly Shea DATE:
More informationINTERCONNECTION STANDARDS FOR GENERATING FACILITIES (GF) CONNECTED TO THE FORT COLLINS DISTRIBUTION SYSTEM. July 2011 UPDATED STANDARDS
INTERCONNECTION STANDARDS FOR GENERATING FACILITIES (GF) CONNECTED TO THE FORT COLLINS DISTRIBUTION SYSTEM July 2011 UPDATED STANDARDS Rev 9.0 July 2011 2 TABLE OF CONTENTS 1.0 SCOPE AND GENERAL REQUIREMENTS...5
More informationHypot III. Graphic Liquid Crystal Display. 10 Memories with 3 Steps per Memory. Low Limit Detection System. SmartGFI Circuit (Patent Pending)
Hypot III DIELECTRIC WITHSTAND TESTERS For Production Line Safety Agency Compliance Testing Graphic Liquid Crystal Display 10 Memories with 3 Steps per Memory Low Limit Detection System 3605 AC Hipot SmartGFI
More informationSupplemental Information
Retirement of NPCC Directory# 3 Supplemental Information On April 1, 2015, NPCC Directory# 3 was retired upon the effective date of PRC-005-2 Protection System Maintenance which is subject to a 12 year
More informationIEEE C Common Requirements Standard
IEEE C37.100.1 Common Requirements Standard Why, How, and What's Next September 29, 2009 1 IEEE C37.100.1 Why Common Requirements? How is the standard used? What is next for the standard? 2 Product standards
More informationPRODUCT SPECIFICATION File: EA-A0601HE-12 Model: SSA-0601HE-12 Date: Apr. 17, 2015
SWITCHING POWER SUPPLY Rev.: A0(+12V/5A) Page: 1 of 5 1.0 Introductions: 2 2.0 AC Input Characteristics: 2 2.1 Input Voltage Rating:. 2 2.2 Input Voltage Range: 2 2.3 Input Frequency: 2 2.4 AC Inrush current:
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62040-3 First edition 1999-03 Uninterruptible power systems (UPS) Part 3: Method of specifying the performance and test requirements This English-language version is derived
More informationCompactBlock Guard I/O EtherNet/IP Safety Modules
Installation Instructions CompactBlock Guard I/O EtherNet/IP Safety Modules Catalog Numbers 1791ES-IB8XOBV4, 1791ES-IB16 Topic Page Important User Information 2 North American Hazardous Location Approval
More informationStandard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Description of Current Draft
More informationCONTENTS 3 EN :2006
3 EN 60950-1:2006 CONTENTS INTRODUCTION...9 0 Principles of safety...9 0.1 General principles of safety...9 0.2 Hazards...10 0.3 Materials and components...14 1 General...15 1.1 Scope...15 1.2 Definitions...17
More informationNERC Relay Loadability Standard Reliability Standards Webinar November 23, 2010
Transmission Relay Loadability FERC Order 733 Project 2010-1313 NERC Relay Loadability Standard Reliability Standards Webinar November 23, 2010 Project Overview 2 Standards Involved PRC-023-2 Transmission
More informationPower Supply System for BTS Site
Power Supply System for BTS Site 48V300A extendable to 350A FnS Power Technology Inc. www.sacredsun.com, www.fnspower.com Page 1 of 7 48V300A(15KW) Power System Solutions and configurations 1 FS-Rectifier-48V50A
More informationSPECIFICATION FOR APPROVAL AC/DC ADAPTOR
CUSTOMER SPECIFICATION FOR APPROVAL AC/DC ADAPTOR CUSTOMER SPEC:INPUT: 100-240V AC 50/60Hz OUTPUT: 5VDC 3000mA CUSTOMER DWG./PART NO. PART NO. KSAS0180500300VU(ROHS) SAMPLE NO: S79570 REV.: A ISSUE DATE:
More informationHuawei FusionHome Smart Energy Solution
Smarter Energy for a Better Life Huawei FusionHome Smart Energy Solution Smart Energy Center SUN2000-3.8/5/7.6/9/10/11.4KTL-USL0 Higher Yields High efficiency inverter topology, CEC efficiency 99% Simple
More informationABL1REM24025 regulated SMPS - single phase V input - 24 V output - 60 W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 60 W Main Range of product Product or component type Power supply type Rated power in W Input voltage Output voltage Power
More informationAdvanced Protection and Control Technologies for T&D Grid Modernization
Advanced Protection and Control Technologies for T&D Grid Modernization i-pcgrid Workshop San Francisco, CA March 31, 2016 Jeff Shiles, Principal Manager Protection & Automation Engineering Southern California
More informationIEEE Working Group November 2014 Plenary Week
IEEE 802.3 Working Group November 2014 Plenary Week David Law Chair, IEEE 802.3 Working Group dlaw@hp.com Web site: www.ieee802.org/3 Page 1 Current IEEE 802.3 activities IEEE 802.3 Task Forces IEEE P802.3bm
More informationSLI 15 Inverter Series Data Sheet 1500 Watt, 1U Compact Inverters
Applications Telecom IT Industrial Safety in compliance with IEC60950:1999, 3 rd edition; EN60950:2000; UL60950, 3 rd edition; CSA Standard C22.2 No.60950-00, 3 rd edition Features New, compact design:
More informationDielectric Withstand and Ground Bond Testers
Dielectric Withstand and Ground Bond Testers For Safety Agency Production Line Compliance Testing U.S. patent#: 5,548,501, 6,054,865. Other patents pending. Safety agency listed. ENHANCED GRAPHIC LCD The
More informationABL1REM Main. Rated power in W. Power supply output current V. <= 100 Aat 230 V AC. 2.5 Aat 240 V
Product datasheet Characteristics ABL1REM24062 Complementary Input voltage limits Network frequency Inrush current Main Cos phi 0.65 Range of product Product or component type Power supply type Rated power
More informationTactical Microgrid Standardization Update to the EGSA Government Relations Committee
Tactical Microgrid Standards Consortium Tactical Microgrid Standardization Update to the EGSA Government Relations Committee Current as of 15 September 2017 US Army Engineer R&D Center (ERDC) US Army Communications-Electronics
More information