INDEP PRODUCT o v e r v i e w

Main components 1 A, high efficiency adjustable single inductor dual mode buckboost DC-DC converter

DN0007 Design note STBB1 buck-boost converter used as a 500mA LED driver with 1.8VDC-5.5VDC Vin Designs from our labs describe tested circuit designs from ST labs which provide optimized solutions for

AL5812EV3 User Guide 150mA, 60V Low-side Adjustable Linear LED Driver

General Description The AL5812 is an adjustable Linear LED driver offering excellent temperature stability and output handling capability. The AL5812 simplifies the design of linear and isolated or non-isolated

10 Degree of Freedom IMU Sensor +-16G, dps, +-8Gauss, hPa

DOF10W 10 Degree of Freedom IMU Sensor +-16G, +-2000 dps, +-8Gauss, 350-700hPa Technical Reference Manual PCB Rev 1.0 www.soc-robotics.com Copyright 2011. SOC Robotics, Inc. 1 Manual Rev 0.9 Warranty Statement

BD027-14E Low-Voltage Nanopower Digital Switch for Medical Devices

BD27-14E Low-Voltage Nanopower Digital Switch for Medical Devices Key Features Low Voltage Operation to.9 V Power Consumption 45 nw Maximum at.9 V Digital Switch Output Precise Detection of Low Magnetic

5B Series 16 Channel Backplane 5B01 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

5B Series 16 Channel Backplane 5B01 FEATURES Mix and Match 5B Series I/O Module Capability Factory Mutual (FM) Approved Approved for Use in Class I, Division2, Groups A, B, C, and D Locations. CE Certified:

CM68 4 Channel NTSC/PAL Video Decoder

CM68 4 Channel NTSC/PAL Video Decoder Technical Reference Guide PCB Rev 1.0 www.soc-robotics.com Copyright 2009. SOC Robotics, Inc. 1 Manual Rev 0.90 Warranty Statement SOC Robotics warrants that the Product

EPROM. Application Note CMOS EPROM. Interfacing Atmel LV/BV EPROMs on a Mixed 3-Volt/5- Volt Data Bus

Interfacing Atmel LV/BV EPROMs on a Mixed 3-volt/5-volt Data Bus Introduction Interfacing Atmel Corporation s low voltage (LV/BV) EPROMs on a common data bus with standard 5-volt devices can be achieved

SPEC NO: DSAJ9211 REV NO: V.6B DATE: SEP/06/2014 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED:

T-1 (3mm) SOLID STATE LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: WP7104VW1C White Features Low power consumption. Popular T-1 diameter package.

Low forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior

Rev. 02 15 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Schottky barrier triple diode with an integrated guard ring for stress protection. Three electrically isolated

Description. Kingbright

8mm (0.32INCH) SINGLE DIGIT NUMERIC DIS- PLAY Part Number: SC32-11GWA Green Features 0.32 inch digit height. Low current operation. Excellent character appearance. High light output. Easy mounting on P.C.

Wasp Embedded Controller

Wasp Embedded Controller Wasp16/32/64 Hardware Reference Guide PCB Rev 1.0 WASP16 WASP32 WASP64 MC433 Hardware Reference Guide Manual Revision 0.85 Table of Contents Warranty Statement...2 1.0 Introduction....4

CM Mpixel CMOS Imaging Camera

CM130 1.3Mpixel CMOS Imaging Camera Technical Reference Guide PCB Rev 1.0 www.soc-robotics.com Copyright 2009. SOC Robotics, Inc. 1 Manual Rev 0.90 Warranty Statement SOC Robotics warrants that the Product

BD020 Nanopower Medical Magnetic Sensor

Datasheet BD020 Nanopower Medical Magnetic Sensor Key Features Ultraminiature 1.1 mm x 1.1 mm x 0.45 mm ULLGA package Solid-State Reliability Precise Detection of Low Magnetic Fields Low Voltage Operation

Description. Kingbright

10.2mm (0.4INCH) THREE DIGIT NUMERIC DISPLAY Part Number: BC04-11SEKWA Super Bright Orange Features 0.4 inch digit height. Low current operation. Excellent character appearance. Easy mounting on P.C. boards

PMEG3015EH; PMEG3015EJ

Rev. 03 13 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for

PMEG1030EH; PMEG1030EJ

Rev. 04 15 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for

IS31AP2145A Class-D Audio Amplifier Evaluation Board Guide

Description The IS31AP2145A demo board is a fully assembled and tested PCB that uses the IS31AP2145A Class-D audio amplifier to drive speakers with 4Ω load or larger. The device is designed for battery

User Guide. PD-IM MH and PD-IM T4H Four 2-Pair Ports and Four 4-Pair Ports Evaluation Boards

User Guide PD-IM-7604+4MH and PD-IM-7604+4T4H Four 2-Pair Ports and Four 4-Pair Ports Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Evaluation System Features... 4

Series III Programmer Installation Manual

Series III Programmer Installation Manual Table of Contents Connecting the Programmer... 2 Installing the Device Driver... 2 Installing the Application Software... 5 Installing the Development Kit Software...

Single-Phase 6.0A Glass Passivated Bridge Rectifier

0 Single-Phase 6.0A Glass Passivated Bridge Rectifier 0 Features D3K Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface

550 MHz, 34 db gain push-pull amplifier

Rev. 01 31 May 2006 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module in SOT115BA package operating at a supply voltage of 24 V (DC). CAUTION This

SY89645L. General Description. Features. Block Diagram. Applications. Markets. Precision Low Skew, 1-to-4 LVCMOS/LVTTL-to-LVDS Fanout Buffer

Precision Low Skew, 1-to-4 LVCMOS/LVTTL-to-LVDS Fanout Buffer General Description The is a 3.3V, fully differential, low skew, 1:4 LVDS fanout buffer that accepts LVTTL or LVCMOS inputs. It is capable

Distributed by: www.jameco.com -800-83-4242 The content and copyrights of the attached material are the property of its owner. SOLID-STATE HEXADECIMAL DISPLAY WITH INTEGRAL TTL CIRCUIT TO ACCEPT, STORE,

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic

GRF AN003. GRF4003 Broadband Performance Optimization

GRF4003 has been developed with the RF system designer in mind. The device offers simple configuration handles which, when adjusted, suit a wide range of applications. The standard evaluation board (EVB)

DRAGON-X. Technical Operating Data DATA SHEET

DATA SHEET DRAGON-X DX1 RoHS Compatible Benefits Featuring High Flux GOLDEN DRAGON LED on Metal-Core PCB Thermally managed for almost immediate application Secondary Optics Options of 12 o, 30 o and 60

L298 based Motor Driver Probots. Starter Guide

L298 based Motor Driver Probots Starter Guide Contents 1) Overview 2) Features 3) Using the board to drive motors 4) Internal and external logic supply for the board 5) Troubleshooting and getting help

Broadband system applications i.e. WCDMA, CATV, etc. General purpose Voltage Controlled Attenuators for high linearity applications

Rev. 2 6 March 2012 Product data sheet 1. Product profile 1.1 General description Quad PIN diode in a SOT753 package. 1.2 Features and benefits 4 PIN diodes in a SOT753 package 300 khz to 4 GHz High linearity

OpenVReg. Open Voltage Regulator Specification. Type 0 Revision 1.0. June 10, 2011

OpenVReg Open Voltage Regulator Specification Type 0 Revision 1.0 June 10, 2011 Contents 1 Introduction 1 1.1 Motivation........................................ 1 1.2 Overview.........................................

Features. Applications

Ultra-Precision 1:8 CML Fanout Buffer with Internal I/O Termination General Description The is a 2.5V/3.3V precision, high-speed, fully differential CML 1:8 fanout buffer. The is optimized to provide eight

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic

VENUS_ Driving Board and 39.6 Prism Display

VENUS_ Driving Board and 39.6 Prism Display Table of Contents 1 Hardware Requirements... 1 (1) PACKAGE CONTENTS... 1 (2) VENUS Specification... 2 (3) Prism product Specification... 3 2 Hardware Guide...

BoxLED ECO M Plus G3. Product family datasheet. LED modules for light advertising and backlighting

BoxLED ECO M Plus G3 LED modules for light advertising and backlighting Areas of application _ Signage and illuminated advertising _ Illumination of single and double-sided light boxes _ Permanent outdoor

Two-Wire Sensor Interfaces

Application Bulletin AB-26 Two-Wire Sensor Interfaces Two-wire sensors are common in industrial control to simplify wiring. But for many sensors, competing constraints make designing two-wire interface

GRF2870 Guerrilla Bloc Ultra-LNA GHz

Product Description is a fully integrated amplifier offering industry leading ultra-low noise and high linearity over 0.6 to 1.0 GHz with no external matching or bias de-coupling required. Features Reference:

Description. Kingbright

T-1 (3mm) SOLID STATE LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-7104GD-12V Green Features Description Low power consumption. Popular T-1 diameter

Evaluation Board User Guide UG-047

Evaluation Board User Guide UG-047 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com Evaluating the ADT7310/ADT7410 Temperature Sensors

Features. Applications

3.3V Ultra-Precision 1:4 LVDS Fanout Buffer/Translator with Internal Termination General Description The is a 3.3V, high-speed 2GHz differential low voltage differential swing (LVDS) 1:4 fanout buffer

TD62M8600FG TD62M8600FG 8CH LOW SATURATION VOLTAGE SOURCE DRIVER FEATURES SCHEMATICS PIN CONNECTION (TOP VIEW)

TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT MULTI CHIP TD62M8600FG TD62M8600FG 8CH LOW SATURATION VOLTAGE SOURCE DRIVER TD62M8600FG is Multi Chip IC incorporates 8 low saturation discrete transistors equipped

GRF5110. Preliminary dbm Power-LNA Tuning Range: GHz. Product Description

Preliminary Product Description is a high linearity PA /Linear Driver with low noise figure (NF). It delivers excellent P1dB, IP3 and NF over a wide range of frequencies with fractional bandwidths of roughly

F360L-4C-S Side-Emitter Lens for Seoul Semiconductor Z Power TM LEDs

F360L-4C-S Side-Emitter Lens for Seoul Semiconductor Z Power TM LEDs High efficiency High-temperature material Easy assembly The F360L-4C-S lens is specifically designed for the Seoul Semiconductor Z Power

LD A very low drop adjustable positive voltage regulator. Description. Features

7 A very low drop adjustable positive voltage regulator Description Datasheet - production data Features P ² PAK Output current limit Low-dropout voltage: typically 400 mv at 7 A output current Output

NAND32GW3F4A. 32-Gbit (4 x 8 Gbits), two Chip Enable, 4224-byte page, 3 V supply, multiplane architecture, SLC NAND flash memories.

32-Gbit (4 x 8 Gbits), two Chip Enable, 4224-byte page, 3 V supply, multiplane architecture, SLC NAND flash memories Features High-density SLC NAND flash memory 32 Gbits of memory array 1 Gbit of spare

OBSOLETE. Isolated, Linearized, Thermocouple Input 3B47 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

FEATURES Interfaces, amplifies, filters, isolates, & linearizes analog input voltages from a J, K, T, E, R, S or B-type thermocouple Thermocouple input signal is internally linearized High accuracy internal

Features. Applications

2.5/3.3V 1-to-1 Differential to LVCMOS/LVTTL Translator Precision Edge General Description Micrel s is a 1-to-1, differential-to-lvcmos / LVTTL translator. The differential input is highly flexible and

F360L-4C-S Side-Emitter Lens for LG Innotek Ceramic 3535 TM LEDs

High efficiency High-temperature material Easy assembly The F360L-4C-S lens is specifically designed for the 3535 Ceramic LEDs from LG Innotek 1. A software-optimized profile provides a 360-degree pattern

Isolated Wideband Voltage Input 3B40 / 3B41 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

Isolated Wideband Voltage Input 3B40 / 3B41 FEATURES Interfaces, amplifies, protects& filters wide-bandwidth (h0 khz) single-channel analog voltage inputs. Module provides simultaneous precision voltage

SPEC NO: DSAE9407 REV NO: V.6B DATE: JAN/19/2015 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:

T-1 3/4 (5mm) ROUND LED LAMP Part Number: WP7143SGC Super Bright Green Features Outstanding material efficiency. Reliable and rugged. Low current capability. RoHS compliant. Description The Super Bright

3-TERMINAL POSITIVE VOLTAGE REGULATOR

FEATURES Output current in excess of 0.5A No external components required Internal short circuit current limiting Output oltage of 5, 6, 8, 9, 12, 15, 18, 24 Internal thermal overload protection Output

TIL311 HEXADECIMAL DISPLAY WITH LOGIC

SOLID-STATE HEXADECIMAL DISPLAY WITH INTEGRAL TTL CIRCUIT TO ACCEPT, STORE, AND DISPLAY -BIT BINARY DATA 7,6-mm (0.300-Inch) Character Height High Brightness Internal TTL MSI Chip With Latch, Decoder,

FCM-series Lenses for Luminus Devices SST-50 and SST-90 LEDs

FCM-series Lenses for Luminus Devices SST-50 and SST-90 LEDs Highly efficient TIR collimation lenses Homogeneous beam Bright central spot with minimal halo The FCM-series lenses are specifically designed

GRF6011. Preliminary. SPDT Failsafe Switch GHz. Product Description. Features. Applications

Product Description Features Path: RFC to RF1: (1.9 GHz); Vdd: 3.3V Insertion Loss: 0.43 db IP1dB: 32.0 dbm IIP3: 49.5 dbm is linear, ultra-low loss SPDT switch that has been designed with failsafe characteristics

Zener diode UDZS15B UDZS15B. Diodes. Rev.C 1/4. Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control 0.9MIN.

Zener diode Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control 0.9MIN. Features 1) Compact, 2-pin mini-mold type for high-density mounting. (UMD2) 2) High reliability.

MIDI CPU Hardware Rev K. User Manual

MIDI CPU Hardware Revision K User Manual Updated 2010-09-08 Additional documentation available at: http://highlyliquid.com/support/ Page 1 / 18 Table of Contents 1.0 Important Safety Information...2 2.0

Descriptions. The Hyper Red source color devices are made with Low power consumption.

T-1 3/4 (5mm) FULL COLOR LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-154A4SURKQBDZGW Features Descriptions Uniform light output. The source

IMPORTANT NOTICE. use

Rev. 05 2 January 2008 Product data sheet IMPORTANT NOTICE Dear customer, As from October 1st, 2006 Philips Semiconductors has a new trade name -, which will be used in future data sheets together with

Craft Port Tiny RS-232 Transceiver for Portable Applications ADM101E. Data Sheet FUNCTIONAL BLOCK DIAGRAM

Data Sheet FEATURES 460 kbit/s Transmission Rate Single 5 V Power Supply Compatible with RS-232 Input/Output Levels 0.1 μf Charge Pump Capacitors One Driver and One Receiver On-Board DC-DC Converter ±4.2

Isolated Process Current Input 7B32 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

Isolated Process Current Input 7B32 FEATURES Interfaces, amplifies and filters a process-current input. Module provides a precision output of either +1 V to +5 V or 0 V to +10 V, linear with temperature.

VPX 6U 18V - 40V Continuous Input Voltage VITA 62 Compliant Power Supply Input EMI Filtering 5 Outputs 1000W Maximum Output Power Operation: -40 C to

6U 18V - 40V Continuous Input Voltage VITA 62 Compliant Power Supply Input EMI Filtering 5 Outputs 1000W Maximum Output Power Operation: -40 C to 85 C (at Card Edge) 91% Typical Efficiency Features Outputs:

STEVAL-IPMnM2N. Motor control power board based on the SLLIMM-nano 2 nd series. Description. Features. RoHS compliant

Motor control power board based on the SLLIMM-nano 2 nd series Data brief RoHS compliant Features Input voltage: from 125 to 400 VDC Nominal power: up to 100 W Nominal current: up to 1.2 A rms Input auxiliary

NWP2081T. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. Half-bridge driver IC

Rev. 1 3 September 2013 Product data sheet 1. General description The is a high-voltage monolithic integrated circuit made using the latch-up free Silicon-On-Insulator (SOI) process. The circuit is designed

ESD Protection Diode in LLP1006-2L

VESD3A1C-HD1 ESD Protection Diode in LLP16-2L 2 1 2856 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) DESIGN SUPPORT TOOLS Models Available 21121 click logo

GRF2012. Released. Broadband Linear Gain Block 0.05 to 3.8 GHz. Product Description. Features. Applications

Product Description Features Reference: 5V/90mA/900 MHz Gain: 14.8 db OIP3: 40.0 dbm OP1dB: 23.0 dbm NF: 2.7 db Reference: 8V/100mA/900 MHz is a broadband gain block with low noise figure and industry

TD62382AP,TD62382AF TD62382AP/AF 8CH LOW INPUT ACTIVE SINK DRIVER FEATURES PIN CONNECTION (TOP VIEW) SCHEMATICS (EACH DRIVER)

TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62382AP,TD62382AF TD62382AP/AF 8CH LOW INPUT ACTIVE SINK DRIVER The TD62382AP / AF are non inverting transistor array which are comprised

Isolated Voltage Input 3B30 / 3B31 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

Isolated Voltage Input 3B30 / 3B31 FEATURES Interfaces, amplifies, & filtersanalog input voltages. Narrow-bandwidth (3Hz) single-channel single conditioning. Module provides simultaneous precision voltage

Isolated, Process Current Output 7B39 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

Isolated, Process Current Output 7B39 FEATURES Interfaces, isolates and filters a 0 V to + 10 V or +1 V to +5 V input signal. Provides an isolated process current output of 0 ma to 20 ma or 4 ma to 20

Slot Style Photoelectric Sensors

HPV Series GL Series Slot Style Photoelectric Sensors FE5V Series FE8V Series GL Series See pages 622-623 Useful for edge detection and end of travel applications Simplified thru-beam mounting and beam

Bidirectional Symmetrical (BiSy) Low Capacitance, Single-Line ESD Protection Diode in LLP1006-2M

VBUS5L1-DD1 Bidirectional Symmetrical (BiSy) Low Capacitance, Single-Line ESD Protection Diode in LLP16-2M 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table

MIC706P/R/S/T, MIC708R/S/T

MIC706P/R/S/T, MIC708R/S/T µp Supervisory Circuit General Description The MIC706 and MIC708 are inexpensive microprocessor supervisory circuits that monitor power supplies in 3.0 and 3.3 microprocessor-based

VoIP Intercom II PoE. Data Sheet

VoIP Intercom II PoE Data Sheet Version 1.17 October 18 th 2016 0.1 Legals Copyright 2006-2015 Oregano Systems Design & Consulting GesmbH ALL RIGHTS RESERVED. Oregano Systems does not assume any liability

Silvertel. Ag Features. 2. Description. Compliant with PoH and IEEE802.3at Type 1(af) & Type 2. Small SIL package size 50.

Silvertel V1.0 Aug 2012 Datasheet Pb 1. Features Compliant with PoH and IEEE802.3at Type 1(af) & Type 2 Small SIL package size 50.8mm (L) x 35mm (H) Low cost Output power up to 95W Minimal (low cost) external

AN2408 Application note

Application note 900mA standalone linear Li-Ion battery charger with thermal regulation Introduction One way to minimize the size and complexity of a battery charger is to use a linear-type charger. The

Technical Specification VPX 3U Block Diagram for VPX-3U-DC28P VOUT Vin+ Vin rtn EMI Filter (Passive) Isolated Non-isolated +5VOUT Non-isolated

18V - 40V Continuous Input Voltage VITA 62 Compliant Power Supply Input EMI Filtering 6 Outputs 500W Maximum Output Power Operation: -40 C to 85 C (at card edge) 91% Typical Efficiency VPX Features Outputs:

Octagon Systems Corporation, the Octagon logo, the Micro PC log and Micro PC are trademarks of Octagon Systems Corporation.

5974 PC 104 Card COPYRIGHT Copyright 1993 Octagon Systems Corporation. All rights reserved. However, any part of this document may be reproduced provided that Octagon Systems Corporation is cited as the

CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.

Rev. 2 28 September 2010 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module operating at a supply voltage of 24 V (DC) in an SOT115J package. The module

MIC24051 Evaluation Board

6A, High-Efficiency, Synchronous DC/DC Buck Regulator with Hyper Speed Control SuperSwitcher II General Description The MIC2451 DC/DC synchronous buck regulator operates over an input supply range of 4.5V

Zener diode KDZ22B KDZ22B. Diodes. Rev.F 1/4. Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Voltage regulation

Zener diode Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Voltage regulation Features 1) Small power mold type. (PMDU) 2) High ESD tolerance Construction Silicon epitaxial planar EX.

AC/DC Solid State Power Controller Module

AC/DC Solid State Power Controller Module Description: The Solid State Power Controller (SSPC) Module is a microcontroller based Solid State Relay designed to be used in Aircraft or Navy in 115VAC/150VDC

UM0401 User manual. User manual for eight bit port expander STMPE801 demonstration board. Introduction

User manual User manual for eight bit port expander STMPE801 demonstration board Introduction This document explains the functioning of the demo board for the port expander Chip STMPE801 with a PC GUI

Zener diode TDZ30 TDZ30. Diodes. Rev.D 1/4. Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control

Zener diode Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control Features 1) Small mold type. (TUMD2) 2) High reliability. 3) Can be mounted automatically, using chip

FLT Lens Series for LG Innotek 3535 Ceramic 1 LEDs

FLT Lens Series for LG Innotek 3535 Ceramic 1 LEDs High efficiency Available in 3 different beams Easy assembly The FLT lens series offers three lenses specifically designed for the 3535 Ceramic LEDs from

AN LAN9xxx Series Migration

AN 24.16 LAN9xxx Series Migration 1 Introduction This application note details the differences one should be aware of when migrating from older to newer generation SMSC Ethernet Controllers. The discussion

Intel 865PE/P Chipset

Intel 865PE/P Chipset Specification Update Intel 82865PE/82865P Chipset Memory Controller Hub (MCH) September 2003 Notice: The Intel 82865PE/Intel 82865P MCH may contain design defects or errors known

ESD Protection Diode in LLP1006-2L

VESD5A1B-HD1 ESD Protection Diode in LLP16-2L 2855 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) 2 1 21121 2856 DESIGN SUPPORT TOOLS click logo to get started

74ABT General description. 2. Features and benefits. 3. Ordering information. Quad 2-input AND gate

Rev. 3 20 November 2015 Product data sheet 1. General description The high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The is a quad

Battery-Voltage. 16K (2K x 8) Parallel EEPROMs AT28BV16. Features. Description. Pin Configurations

Features 2.7 to 3.6V Supply Full Read and Write Operation Low Power Dissipation 8 ma Active Current 50 µa CMOS Standby Current Read Access Time - 250 ns Byte Write - 3 ms Direct Microprocessor Control

GRF2133. Preliminary. Ultra-High Gain LNA Tuning Range: 0.1 to 2.7 GHz. Product Description. Features. Applications

Product Description is a broadband linear gain block featuring ultra-high gain and sub 0.85 db noise figure for small cell, cellular booster, wireless infrastructure and other high performance applications.

MIC A Evaluation Board

75V/4A Hyper Speed Control Synchronous DC/DC Buck Regulator General Description meter and V IN at Vin and GND terminals with voltmeter. Do not apply power until Step 5. The MIC28500 DC/DC regulator operates

Ant6. 6 Channel H Bridge 3-Axis Bipolar Stepper Motor Controller. Technical Reference Manual PCB Rev 1.0.

Ant6 6 Channel H Bridge 3-Axis Bipolar Stepper Motor Controller Technical Reference Manual PCB Rev 1.0 www.soc-robotics.com Copyright 2008. SOC Robotics, Inc. 1 Manual Rev 0.9 Warranty Statement SOC Robotics

GRF2541. Preliminary High Gain, Ultra-LNA w/bypass ac: GHz. Product Description. Features. Applications

Product Description GRF2541 is an ultra-low noise amplifier (LNA) with bypass designed for IEEE 802.11a/n/ac/p applications in the 5GHz band (5.1 GHz to 5.925 GHz). The device exhibits outstanding de-embedded

MIC705/706/707/708. General Description. Features. Applications. Typical Application. µp Supervisory Circuit

µp Supervisory Circuit General Description The MIC705, MIC706, MIC707, and MIC708 are inexpensive microprocessor supervisory circuits that monitor power supplies in microprocessor-based systems. The circuit

FML Series Lens for the Cree XLamp 1 LEDs

High efficiency Available in five different beam profiles High homogeneity of the light beam Patent pending Designed for use with Cree XLamp 1 LEDs (please contact Fraen for suitability of this lens with

GRF2051. Ultra-Low Noise Amplifier; Tuning Range: GHz. Features. Applications. Preliminary. Product Description. Functional Block Diagram Ven

Ultra-Low Noise Amplifier; Tuning Range: 0.7 3.8 GHz Package: 2.0 x 2.0 mm QFN-12 Product Description Features Reference Condition: 1.9 GHz, 5.0 V and 70 ma Gain: 19.2 db Eval Board NF: 0.37 db De-embedded

UNIVERSITY OF NORTH CAROLINA AT CHARLOTTE Department of Electrical and Computer Engineering

UNIVERSITY OF NORTH CAROLINA AT CHARLOTTE Department of Electrical and Computer Engineering EXPERIMENT 5 ZENER DIODE VOLTAGE REGULATOR, DIODE CLIPPERS AND CLAMPERS OBJECTIVES The purpose of this experiment

DataFlash and Serial Flash BGA Package. Design Note. DataFlash and Serial Flash BGA Package. Introduction

DataFlash and Serial Flash BGA Package Introduction Adesto Technologies, DataFlash (AT45DB) and Serial Flash Devices (AT25DF) have been offered for sale in different Ball Grid Array (BGA) package options.

PNP 500 ma, 50 V resistor-equipped transistor; R1 = 2.2 kω, R2 = open

PNP 500 ma, 50 V resistor-equipped transistor; R1 = 2.2 kω, R2 = open Rev. 4 8 November 2010 Product data sheet 1. Product profile 1.1 General description 500 ma PNP Resistor-Equipped Transistor (RET)

FLT Lens Series for Cree XLamp 1 LEDs

FLT Lens Series for Cree XLamp 1 LEDs High efficiency Available in 3 different beams Easy assembly The FLT lens series offers three lenses specifically designed for XB-D, XP-E, XP-G, XP- G2 and XT-E XLamp

Technical Committee. Addendum to ATM Physical Medium Dependent Interface Specification for 155 Mb/s Over Twisted Pair Cable (af-phy-0015.

Technical Committee Addendum to ATM Physical Medium Dependent Interface Specification for 155 Mb/s Over Twisted Pair Cable (af-phy-0015.000) af-phy-0053.000 January 1996 af-phy-053.000 ATM Forum Technical

STBC ma standalone linear Li-Ion battery charger with thermal regulation. Description. Features. Applications

800 ma standalone linear Li-Ion battery charger with thermal regulation Description Datasheet - production data Features Programmable charge current up to 800 ma No external MOSFET, sense resistors or