InView Communication Modules

Size: px
Start display at page:

Download "InView Communication Modules"

Transcription

1 Installation Instructions InView Communication Modules Catalog Numbers 2706-PxM, 2706-PxK, 2706-PxP Topic Page About This Publication 1 Important User Information 2 Power Supply Requirements 3 Mount the Communication Module to the 2706-P42 and 2706-P44 Displays 3 Wire the Communication Module to the 2706-P42 and 2706-P44 Displays 3 Mount the Communication Module to the 2706-P72 and 2706-P74 Displays 5 Wire the Communication Module to the 2706-P72 and 2706-P74 Displays 6 Mount the Communication Module to the 2706-P92 and 2706-P94 Displays 7 Wire the Communication Module to the 2706-P92 and 2706-P94 Displays 8 Using the Communication Module with a 2706-P22R Display 10 Specifications 11 Additional Resources 11 Configuration Utilities 11 About This Publication This publication shows how to connect the InView communication module to the InView display.

2 2 InView Communication Modules Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at describes some important differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual. Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited. Throughout this manual, when necessary, we use notes to make you aware of safety considerations. WARNING Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to personal injury or death, property damage, or economic loss. IMPORTANT Identifies information that is critical for successful application and understanding of the product. Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic loss. Attentions help you to identify a hazard, avoid a hazard, and recognize the consequences. SHOCK HAZARD Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may be present. BURN HAZARD Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach dangerous temperatures.

3 InView Communication Modules 3 Power Supply Requirements The 2706-PxM and 2706-PxK modules are powered by the InView 2706-P4x, 2706-P7x, and 2706-P9x displays. The 2706-PxP module requires an external 24V ±25%, 1 A dc power supply for use with the InView 2706-P22R panel mount display. Mount the Communication Module to the 2706-P42 and 2706-P44 Displays The InView communication module, catalog number 2706-PxM, is designed to mount to the track of the InView 2706-P42 and 2706-P44 displays. The back plate of the module has tabs for attaching to the track. Tighten mounting screws until they bottom out against the back plate. To TB1 To Controller (user-supplied cable) For ease in mounting, rotate module 90 so that the mounting holes are on top and bottom. Rotate the module clockwise over track until the alignment is horizontal. TB1 Wire the Communication Module to the 2706-P42 and 2706-P44 Displays Below is an illustration and description of the InView communication module and its connectors with relation to an InView 2706-P4x display. Back of InView Display (2706-P42 and 2706-P44) User-supplied cable routed through NEMA-rated cable grip (supplied). NEMA Type 12 enclosure with removable cover. Torque enclosure cover screws to 0.68 Nm (6 lb-in) PxM Serial cable to be connected to terminal block inside power supply cover on back of InView display. Cable to be routed through cable grip (supplied).

4 4 InView Communication Modules 1. Disconnect power to the InView display. Hazardous voltage. Contact with high voltage may cause death or serious injury. Always disconnect power to the InView display prior to servicing. 2. Remove the six screws from the power supply cover and remove cover. Set the screws and cover aside for a later step P42 and 2706-P44 Cover Screws Cover Screws 3. Feed the serial cable through the cable grip (shipped with module). 4. Insert the serial wires through the conduit opening on either the top or the bottom of the InView display. TB1 Terminal Block for Serial Connection Insert the serial wires with the cable grip into one of these conduit openings. Power Line 5. Mount the cable grip to the InView display housing, tighten the locknut finger-tight, and rotate an additional 1/2 turn.

5 InView Communication Modules 5 6. Connect the incoming serial wires to the TB1 terminal block. TIP Be sure to place the wires so they are not caught by screws when replacing the power supply cover and so they do not interfere with fan operation. TB1 TB1 Incoming Serial Wires Black (GND)1 Red (PWR, +5V)2 Orange (TX)3 Brown (RX) Incoming Serial Wires TIP The 2706-PxM communication modules are powered through the serial cable by the display (series C). 7. Torque the cable grip cap until the cable is securely fastened. 8. Replace the power supply back-cover with the six screws, torquing the screws to 2.7 Nm (24 lb-in). 9. Connect the power supply to a power source. Mount the Communication Module to the 2706-P72 and 2706-P74 Displays The 2706-P72 and 2706-P74 displays are equipped with a mounting plate inside the case for mounting the 2706-P_K communication kit. Follow these steps for mounting the communication kit. Hazardous voltage. Contact with high voltage may cause death or serious injury. Always disconnect power to the InView display prior to servicing. 1. Disconnect power to the InView display.

6 6 InView Communication Modules 2. Open the front of the InView display case by turning the latches counter clockwise and carefully lowering (opening) the front of the case. 3. Install the communication module to the mounting plate located near the TB1 terminal block by using the supplied standoffs and screws. 4. Torque the screws to 0.68 Nm (6 lb-in). TB1 To TB1 To Controller (user-supplied cable) A label is included in the hardware kit that indicates the default IP address for the 2706-PENETK EtherNet/IP communication module. The module is shipped with a default IP address of Please consult with personnel who will be configuring communication for the most appropriate placement of the label. Wire the Communication Module to the 2706-P72 and 2706-P74 Displays The power to the communication module is provided by the InView display (series C). Follow these steps for wiring the communcation module. 1. Connect the serial wires to the TB1 terminal block in the InView display. TB1 Black (GND)1 Red (PWR, +5V)2 Orange (TX)3 Brown (RX) Serial Wires TIP The 2706-PxK communication modules are powered through the serial cable by the display (series C).

7 InView Communication Modules 7 2. Route the user-supplied network cable through the cable grip and locknut that is provided. 3. Connect the user-supplied network cable to the communication module. 4. Verify that there is adequate slack in the cable by making a loop of cable inside the InView case. 5. Mount the cable grip to the InView display housing, tighten the locknut finger-tight, and rotate an additional 1/2 turn. 6. Torque the cable grip cap until the cable is securely fastened. 7. Carefully close the InView case and tighten the latches by turning them clockwise. 8. Connect the InView display to a power source. Mount the Communication Module to the 2706-P92 and 2706-P94 Displays The 2706-P92 and 2706-P94 displays are equipped with a mounting plate inside the case for mounting the 2706-P_K communication module. Follow these steps for mounting the communication kit. Hazardous voltage. Contact with high voltage may cause death or serious injury. Always disconnect power to the InView display prior to servicing. 1. Disconnect power to the InView display. 2. Open the front of the InView display case by turning the latches counterclockwise and carefully lowering (opening) the front of the case.

8 8 InView Communication Modules 3. Install the communication module to the mounting plate located near the TB1 terminal block by using the supplied standoffs and screws. 4. Torque the screws to 0.68 Nm (6 lb-in). Communication Module Front Cover A label is included in the hardware kit that indicates the default IP address for the 2706-PENETK EtherNet/IP communication module. The module is shipped with a default IP address of Please consult with personnel who will be configuring communication for the most appropriate placement of the label. Wire the Communication Module to the 2706-P92 and 2706-P94 Displays The power to the communication module is provided by the InView display. Follow these steps for wiring the communcation module.

9 InView Communication Modules 9 1. Connect the serial wires to the TB2, TB3 terminal block in the InView display. Communication Module To TB2 and TB3 TB2 TB3 TB2 - Aux +5V +5V (Red) GND (Black) TB3 - RS-232 TXD (Orange) RXD (Brown) RTS TIP CTS GND EGND The 2706-PxK communication modules are powered through the serial cable by the display (series A). 2. Route the user-supplied network cable through the cable grip and locknut that is provided. 3. Connect the user-supplied network cable to the communication module. 4. Verify that there is adequate slack in the cable by making a loop of cable inside the InView case. 5. Mount the cable grip to the InView display housing, tighten the locknut finger-tight, and rotate an additional 1/2 turn. 6. Torque the cable grip cap until the cable is securely fastened. 7. Carefully close the InView case and tighten the latches by turning them clockwise. 8. Connect the InView display to a power source.

10 10 InView Communication Modules Using the Communication Module with a 2706-P22R Display The 2706-P22R InView panel-mount display can be used with a 2706-PxP communication module. The module is mounted on a DIN rail inside the enclosure in which the 2706-P22R display is mounted. This maintains the NEMA 4x, 12, or 13 rating. The 2706-PxP communication module also requires a separate 24V dc power supply. This module does not receive power from the InView display. Follow these steps to mount and connect the communication module. Hazardous voltage. Contact with high voltage may cause death or serious injury. Always disconnect power to the InView display prior to servicing. 1. Disconnect power to the enclosure. 2. Mount the DIN rail somewhere in the enclosure, near the 2706-P22R display. 3. Snap the communication module to the DIN rail and lock the latches. 4. Connect the user-supplied network cable to the communication module. RS V dc (user-supplied) Network Port To Controller (user-supplied cable) DIN Rail 2706-NC13 Serial Cable (supplied) RS V dc Class 2 24V dc

11 InView Communication Modules Connect the communication module to the 2706-P22R display by using the supplied serial cable. 6. Provide 24V ±25%, 1 A dc to the communication module. Specifications InView Communication Module PxM, 2706-PxK, 2706-PxP Attribute Temperature, operating (inside panel) Temperature, storage Humidity (operating and noncondensing) Shock Vibration - channel mount Vibration - DIN rail mount Value 0 55 C ( F) C ( F) 5 95% 15 g max pulse operating 30 g max pulse nonoperating 10 Hz < f < 57 Hz in. p-p displacement 57 Hz < f 500 Hz 1.0 g 10 Hz < f < 57 Hz in. p-p displacement 57 Hz < f 500 Hz 2.0 g Additional Resources For more information regarding the InView communication module, see these publications. Resource InView Communication Module User Manual, publication 2706-UM PSW1 Online Help Description Provides information about the InView communication module. Details configuration set-up software. You can view or download publications at To order paper copies of technical documentation, contact your local Rockwell Automation distributor or sales representative. Configuration Utilities A copy of the utilities to configure the InView communication modules is included on the InView Messaging Software CD, version 1.3 or later (catalog number 2706-PSW1).

12 Rockwell Automation Support Rockwell Automation provides technical information on the Web to assist you in using its products. At you can find technical and application notes, sample code, and links to software service packs. You can also visit our Support Center at for software updates, support chats and forums, technical information, FAQs, and to sign up for product notification updates. In addition, we offer multiple support programs for installation, configuration, and troubleshooting. For more information, contact your local distributor or Rockwell Automation representative, or visit Installation Assistance If you experience a problem within the first 24 hours of installation, please review the information that's contained in this manual. You can also contact a special Customer Support number for initial help in getting your product up and running. United States or Canada Outside United States or Canada Use the Worldwide Locator at or contact your local Rockwell Automation representative. New Product Satisfaction Return Rockwell Automation tests all of its products to help ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures. United States Outside United States Contact your distributor. You must provide a Customer Support case number (call the phone number above to obtain one) to your distributor to complete the return process. Please contact your local Rockwell Automation representative for the return procedure. Documentation Feedback Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete this form, publication RA-DU002, available at Rockwell Automation maintains current product environmental information on its website at Allen-Bradley, InView, and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat: İçerenköy, İstanbul, Tel: +90 (216) Supersedes Publication 2706-IN015D-MU-P - April 2004 PN Copyright 2007 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

PowerMonitor 1000 Unit Catalog Number Upgrade

PowerMonitor 1000 Unit Catalog Number Upgrade Installation Instructions PowerMonitor 1000 Unit Catalog Number Upgrade Catalog Numbers 1408-UPT1-E3, 1408-UPT2-E3, 1408-UPE1-E3, 1408-UPE2-E3, 1408-UP485-ENT, 1408-UPT3-E3 Topic Important User Information

More information

InView Firmware Update

InView Firmware Update Installation Instructions InView Firmware Update Topic Page Hazardous Voltage 3 Change EPROM on 2706-P72, 2706-P74 Display 3 Change EPROM on 2706-P42, 2706-P44 Displays 5 Firmware Upgrade Kit 7 2 InView

More information

PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer

PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer Installation Instructions PCI Expansion Slot Kit for 6181P (1500P) Series D Integrated Display Computer Catalog Number 6189V-2PCI15R Topic Page About This Publication 1 Important User Information 2 Safety

More information

Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout

Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout Installation Instructions Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout Catalog Numbers 2711-NR5T, 2711P-RAT12E2 Topic Page About This Publication 1 Important User Information 2 About

More information

CompactLogix Power Supplies Specifications

CompactLogix Power Supplies Specifications Technical Data CompactLogix Power Supplies Specifications 1768 CompactLogix Power Supplies Catalog Numbers 1768-PA3, 1768-PB3 1769 Compact I/O Power Supplies Catalog Numbers 1769-PA2, 1769-PB2, 1769-PA4,

More information

Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494

Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494 Technical Data Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494 Topic Page 1494U Disconnect Switch Specifications 2 1494C, 1494F, 1494G, 1494R, 1494V Disconnect Switch

More information

Kinetix 6000 Axis Module and Shunt Module

Kinetix 6000 Axis Module and Shunt Module Installation Instructions Kinetix 6000 and Shunt Module Catalog Numbers 2094-AMxx, 2094-BMxx 2094-AMxx-S, 2094-BMxx-S 2094-BSP2 Topic Page About This Publication 1 Important User Information 2 Before You

More information

PowerFlex 755 Common DC Input Drives, Frames Interlock Assembly and Precharge Assembly Left-front Cover Retrofit Kit

PowerFlex 755 Common DC Input Drives, Frames Interlock Assembly and Precharge Assembly Left-front Cover Retrofit Kit Installation Instructions PowerFlex 755 Common DC Input Drives, Frames 8...10 Interlock Assembly and Precharge Assembly Left-front Cover Retrofit Kit Catalog Numbers 20G14x, 21G14x Topic Page General Precautions

More information

Allen-Bradley to-230V Conversion Kit Cat. Nos FC FC075

Allen-Bradley to-230V Conversion Kit Cat. Nos FC FC075 Installation Instructions IN Allen-Bradley 1397 460-to-230V Conversion Kit Cat. Nos. 1397-FC030 1397-FC075 What This Option Provides The 460-to-230V Conversion Kit provides (2) replacement fuses that are

More information

Solar Combiner Enclosure

Solar Combiner Enclosure Installation Instructions Solar Combiner Enclosure Catalog Numbers 1000-SB006, 1000-SB012 Topic Page Description 1 Important Safety Instructions 3 Nameplate Data 4 Planning for Installation 4 Install the

More information

Differential Liquid/Gas Pressure Transmitter

Differential Liquid/Gas Pressure Transmitter Installation Instruction Differential Liquid/Gas Pressure Transmitter Catalog Number(s) 1414-CPZ10FWFAA, 1414-IPZ10FWFAA Explosion Hazard WARNING Do not use in an explosive or hazardous environment, with

More information

Digital ac/dc (24V) Input Module

Digital ac/dc (24V) Input Module Installation Instructions Digital ac/dc (24V) Input Module Catalog Number 1771-IND, Series C Topic Page Important User Information 2 Before You Begin 3 Power Requirements 3 Prevent Electrostatic Discharge

More information

InView Marquee Message Display

InView Marquee Message Display Installation Instructions InView Marquee Message Display Introduction These instructions show how to change the serial address and how to mount InView series signs with NEMA Types 4, 4X, and 12 enclosures.

More information

USB-to-DeviceNet Cable

USB-to-DeviceNet Cable Installation Instructions USB-to-DeviceNet Cable Catalog Number 1784-U2DN Topic Page Important User Information 2 Environment and Enclosure 3 About the Cable 4 Install the Cable 5 Status Indicators 10

More information

1756 ControlLogix Chassis Specifications

1756 ControlLogix Chassis Specifications Technical Data 1756 ControlLogix Chassis Specifications Catalog Numbers 1756-A4/B, 1756-A7/B, 1756-A10/B, 1756-A13/B, 1756-A17/B, 1756-A4LXT, 1756-A5XT, 1756-A7LXT, 1756-A7XT Topic Page Standard ControlLogix

More information

MicroLogix 1400 Embedded Web Server

MicroLogix 1400 Embedded Web Server User Manual MicroLogix 1400 Embedded Web Server Bulletin 1766 Controllers Important User Information Solid-state equipment has operational characteristics differing from those of electromechanical equipment.

More information

Teaching Color-Sensing Connected Components Building Block. Quick Start

Teaching Color-Sensing Connected Components Building Block. Quick Start Teaching Color-Sensing Connected Components Building Block Quick Start Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment.

More information

Logix5000 Control Systems: Connect a PanelView Plus Terminal over an EtherNet/IP Network

Logix5000 Control Systems: Connect a PanelView Plus Terminal over an EtherNet/IP Network Quick Start Logix5000 Control Systems: Connect a PanelView Plus Terminal over an EtherNet/IP Network Catalog Numbers Logix5000 Controllers, 2711P PanelView Plus Terminals Important User Information Solid-state

More information

Catalog Numbers 9308-RSFB64ENE, 9308-RSFB256ENE, 9308-RSFB1024ENE

Catalog Numbers 9308-RSFB64ENE, 9308-RSFB256ENE, 9308-RSFB1024ENE Release Notes RSFieldbus Software Catalog Numbers 9308-RSFB64ENE, 9308-RSFB256ENE, 9308-RSFB1024ENE Topic Page Important User Information 2 Before You Begin 3 Software Requirements 4 Install the Software

More information

Reference Manual. Rockwell Automation Library of Process Objects: Condition Gate Delay (P_Gate) Version 3.5

Reference Manual. Rockwell Automation Library of Process Objects: Condition Gate Delay (P_Gate) Version 3.5 Reference Manual Rockwell Automation Library of Process Objects: Condition Gate Delay (P_Gate) Version 3.5 Important User Information Read this document and the documents listed in the additional resources

More information

Rockwell Automation Library of Steam Table Instructions

Rockwell Automation Library of Steam Table Instructions Reference Manual Original Instructions Rockwell Automation Library of Steam Table Instructions Version 4.0 Important User Information Read this document and the documents listed in the additional resources

More information

Color-Sensing Connected Components Building Block. Quick Start

Color-Sensing Connected Components Building Block. Quick Start Color-Sensing Connected Components Building Block Quick Start Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety

More information

ArmorPoint I/O Field Potential Distributor, Series A

ArmorPoint I/O Field Potential Distributor, Series A Installation Instructions ArmorPoint I/O Field Potential Distributor, Series A (Cat. No. 1738-FPD) The field potential distributor (Cat. no. 1738-FPD) lets you change the field power distribution source

More information

Kinetix 300 Memory Module Programmer

Kinetix 300 Memory Module Programmer Kinetix 300 Memory Module Programmer Catalog Number 2097-PGMR Topic About the Memory Module Programmer 1 Parts List 3 Batteries Operation 4 Using Memory Module Programmer 6 Switch On/Off Memory Module

More information

VersaView Industrial Non-display Computers

VersaView Industrial Non-display Computers Installation Instructions VersaView Industrial Non-display Computers Catalog Numbers 6155R-NSXPH, 6155R-NPXPH, 6155R-7SXPH, 6155R-7S2KH, 6155R-7PXPH, 6155R-7P2KH, 6155R-14SXPH, 6155R-14S2KH, 6155R-14PXPH,

More information

Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network

Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Quick Start Logix5000 Control Systems: Connect POINT I/O Modules over a DeviceNet Network Catalog Numbers Logix5000 Controllers, 1734 POINT I/O Modules Important User Information Solid-state equipment

More information

Using TLS3-GD2 Guardlocking Interlock with ArmorBlock Guard I/O and SmartGuard Controller

Using TLS3-GD2 Guardlocking Interlock with ArmorBlock Guard I/O and SmartGuard Controller Safety Application Example Using TLS3-GD2 Guardlocking Interlock with ArmorBlock Guard I/O and SmartGuard Controller Guardlocking with On-machine Components Safety Rating: Category 3, according to EN954-1

More information

ProcessLogix R510.0 Server Installation Instructions

ProcessLogix R510.0 Server Installation Instructions ProcessLogix R510.0 Server Installation Instructions Installation Instructions Before you begin... This publication guides you through the remaining processes required to initialize a ProcessLogix Server.

More information

PanelView 600 Terminals

PanelView 600 Terminals Installation Instructions PanelView 600 Terminals Catalog Numbers 2711-K6Cxx, 2711-B6Cxx Topic Page Hazardous Location Considerations 3 European Union Directive Compliance 4 Wiring and Safety Guidelines

More information

Compact Industrial Non-display Computers

Compact Industrial Non-display Computers Installation Instructions Compact Industrial Non-display Computers Catalog Numbers 6155R-NSXP, 6155R-NPXP, 6155R-NPXPDC, 6155F-NPXP, 6155F-NPWE, 6155F-NPXPDC, 6155F-NPWEDC Topic Page Important User Information

More information

GuardLogix: Dual Zone Gate Protection with E-stop and Trojan Interlock Switch

GuardLogix: Dual Zone Gate Protection with E-stop and Trojan Interlock Switch Safety Application Example GuardLogix: Dual Zone Gate Protection with E-stop and Trojan Interlock Switch Safety Rating: PLd, Cat. 3 to EN ISO 13849.1 2008 Introduction... 2 Important User Information...

More information

GuardLogix: Safety Gate Application with SensaGuard Switch

GuardLogix: Safety Gate Application with SensaGuard Switch Safety Application Example GuardLogix: Safety Gate Application with SensaGuard Switch Safety Rating: PLe, Cat. 4 to EN ISO 13849.1 2008 Introduction...2 Important User Information...2 General Safety Information...3

More information

GuardLogix: TLS Guardlocking Application

GuardLogix: TLS Guardlocking Application Safety Application Example GuardLogix: TLS Guardlocking Application Safety Rating: PLd, Cat. 3 to EN ISO 13849.1 2008 Introduction... 2 Important User Information... 2 General Safety Information... 3 Description...

More information

Embedded I/O Expansion Board with 10 Outputs

Embedded I/O Expansion Board with 10 Outputs Installation Instructions Embedded I/O Expansion Board with 10 Outputs Catalog Number 1799-OQ10X Topic Page Important User Information 2 Environment and Enclosure 3 About the Board 4 Install the Board

More information

PowerMonitor 5000 Unit Catalog Number Upgrade

PowerMonitor 5000 Unit Catalog Number Upgrade Installation Instructions PowerMonitor 5000 Unit Catalog Number Upgrade Catalog Numbers 1426-MxE-xxx Topic Page Upgrade the Device Catalog Number with the ControlFLASH Utility 3 Determine Communication

More information

ControlLogix HART Analog I/O Modules

ControlLogix HART Analog I/O Modules Release Notes ControlLogix HART Analog I/O Modules Catalog Numbers, Topic Page Before You Begin 2 Enhancements 4 Corrected Anomalies 4 Known Anomalies 6 Additional Resources 7 About This Publication These

More information

Simple Package Measurement Connected Components Building Block. Quick Start

Simple Package Measurement Connected Components Building Block. Quick Start Simple Package Measurement Connected Components Building Block Quick Start Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment.

More information

PowerMonitor 5000 USB Driver

PowerMonitor 5000 USB Driver Installation Instructions Original Instructions PowerMonitor 5000 USB Driver Bulletin Number 1426 Topic Page Overview 1 Summary of Changes 2 Download the USB Driver 2 Install Drivers 7 Configure the Connection

More information

ArmorPoint 24V dc Input Modules, Series A

ArmorPoint 24V dc Input Modules, Series A Installation Instructions ArmorPoint V dc Input Modules, Series A Cat. Nos. 8-IBM, -IBM8, -IBM, -IB8M8, -IB8M, -IB8M, -IVM, -IV8M8, -IV8M, -IV8M The ArmorPoint I/O family consists of modular I/O modules.

More information

Starter and Circuit Breaker Application with PowerFlex 7000

Starter and Circuit Breaker Application with PowerFlex 7000 Application Technique Starter and Circuit Breaker Application with PowerFlex 7000 Bulletins 7000A, 7000, 7000L Topic Page General Precautions 2 Document Scope 2 Purpose 3 Drive Associated MV Starters and

More information

Logix5000 Controllers Function Block Diagram

Logix5000 Controllers Function Block Diagram Logix5000 Controllers Function Block Diagram Catalog Numbers 1756 ControlLogix, 1769 CompactLogix, 1789 SoftLogix, 1794 FlexLogix, PowerFlex 700S with DriveLogix Programming Manual Important User Information

More information

PHOTOSWITCH Distance Measurement Sensor

PHOTOSWITCH Distance Measurement Sensor Installation Instructions Original Instructions Catalog Numbers 45DMS-B8LAT-D4, 45DMS-B8LGT-D5 Topic Description Save these instructions for future use. Description Features Sensor Configuration Precision

More information

Installation Instructions

Installation Instructions Installation Instructions (Cat. No. 1771-OBN Series B) Use this document as a guide when installing the catalog number 1771-OBN series B output module. Because of the variety of uses for the products described

More information

Allen-Bradley Motors

Allen-Bradley Motors Installation Instructions Firmware Update Instructions for Ethernet, Enhanced and ControlNet PLC-5 Programmable Controllers Purpose Firmware Update Kit Contents Hardware and Software Requirements This

More information

POINT I/O and ArmorPOINT I/O EtherNet/IP Adapters

POINT I/O and ArmorPOINT I/O EtherNet/IP Adapters Release Notes POINT I/O and ArmorPOINT I/O EtherNet/IP Adapters Firmware Revision: 5.016 Catalog Numbers 1734-AENT, 1738-AENT, 1734-AENTR, 1738-AENTR, Series B Topic Page About This Publication 1 Before

More information

DeviceNet ArmorBlock Network Powered 16-input Module

DeviceNet ArmorBlock Network Powered 16-input Module Installation Instructions DeviceNet ArmorBlock Network Powered 16-input Module Catalog number 1732D-IBDPM12MND, Series A Table of Contents Topic Page Important User Information 2 Environment and Enclosure

More information

PowerFlex 750-Series Power Option Cabinets

PowerFlex 750-Series Power Option Cabinets Installation Instructions PowerFlex 750-Series Power Option Cabinets Topic Page Introduction 1 Additional Resources 2 What the Kits Contain 2 Bus-bar Selection Tables 4 Approximate Dimensions 8 Remove

More information

Using GuardShield Light Curtains (Safe 4, Micro 400, or 440L), with ArmorBlock Guard I/O and SmartGuard Controller

Using GuardShield Light Curtains (Safe 4, Micro 400, or 440L), with ArmorBlock Guard I/O and SmartGuard Controller Safety Application Example Using GuardShield Light Curtains (Safe 4, Micro 400, or 440L), with ArmorBlock Guard I/O and SmartGuard Controller Light Curtain with On-machine Components Safety Rating: Category

More information

PowerFlex 700H AC Drive Safe Torque Off Option

PowerFlex 700H AC Drive Safe Torque Off Option User Manual PowerFlex 700H AC Drive Safe Torque Off Option Catalog Number 20C-DG01 Important User Information Solid-state equipment has operational characteristics differing from those of electromechanical

More information

Installation Instructions

Installation Instructions Installation Instructions Cat. No. 1771 P3, P4, P5 and P5E Use this document as a guide when installing the catalog number 1771-P3, -P4, -P5 or -P5E power supplies. Because of the variety of uses for the

More information

GuardLogix Controller to Kinetix 6000 Drive with Safe-Off using EtherNet/IP CompactBlock Guard I/O Module

GuardLogix Controller to Kinetix 6000 Drive with Safe-Off using EtherNet/IP CompactBlock Guard I/O Module Safety Application Example GuardLogix Controller to Kinetix 6000 Drive with Safe-Off using EtherNet/IP CompactBlock Guard I/O Module Safety Rating: SIL3/Category 3 (also see SIL3/CAT4 section), according

More information

Removing and Replacing the Line Interface Module Internal Components

Removing and Replacing the Line Interface Module Internal Components Installation Instructions Removing and Replacing the Line Interface Module Internal Components Catalog Numbers 09-ALS, 09-ALS, 09-AL0S, 09-AL7S, 09-BL0S, 09-BLS, 09-BL0S, 09-BL7S, 09-XL7S-C, 09-XL7S-C,

More information

DriveGuard. Safe-Off Option for PowerFlex 70 AC Drives. User Manual.

DriveGuard. Safe-Off Option for PowerFlex 70 AC Drives. User Manual. DriveGuard Safe-Off Option for PowerFlex 70 AC Drives User Manual www.abpowerflex.com Important User Information Solid state equipment has operational characteristics differing from those of electromechanical

More information

Reference Manual. Rockwell Automation Sequencer Object Version 4.0

Reference Manual. Rockwell Automation Sequencer Object Version 4.0 Reference Manual Rockwell Automation Sequencer Object Version 4.0 Important User Information Read this document and the documents listed in the additional resources section about installation, configuration,

More information

Kinetix 6200 and Kinetix 6500 IAM and AM Power Modules

Kinetix 6200 and Kinetix 6500 IAM and AM Power Modules Installation Instructions Kinetix 6200 and Kinetix 6500 IAM and AM Power Modules Catalog Numbers 2094-BC01-MP5-M, 2094-BC01-M01-M, 2094-BC02-M02-M, 2094-BC04-M03-M, 2094-BC07-M05-M, 2094-BMP5-M, 2094-BM01-M,

More information

Logix5000 Controllers Nonvolatile Memory Card

Logix5000 Controllers Nonvolatile Memory Card Programming Manual Logix5000 Controllers Nonvolatile Memory Card 1756 ControlLogix, 1756 GuardLogix, 1769 CompactLogix, 1769 Compact GuardLogix, 1789 SoftLogix, 5069 CompactLogix, Studio 5000 Logix Emulate

More information

PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers

PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers Installation Instructions PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers Topic Page Introduction, Compatibility 1 Additional Resources

More information

Installation Instructions. FLEX I/O D-Shell Terminal Base Units and Distribution Boards

Installation Instructions. FLEX I/O D-Shell Terminal Base Units and Distribution Boards FLEX I/O D-Shell Terminal Base Units and Distribution Boards 1794-TB37DS and 1794-TB62DS 1794-TB37EXD4VM8, 1794-TB37EXD4CM8 and 1794-TB62EXD4X15 Important User Information Solid state equipment has operational

More information

Installation Instructions

Installation Instructions Installation Instructions (Catalog Number 1771-OD) This document provides information on: Because of the variety of uses for the products described in this publication, those responsible for the application

More information

PowerFlex 70 Safe-Off Control EtherNet/IP Guard I/O Safety Module and GuardLogix Integrated Safety Controller

PowerFlex 70 Safe-Off Control EtherNet/IP Guard I/O Safety Module and GuardLogix Integrated Safety Controller Safety Application Example PowerFlex 70 Safe-Off Control EtherNet/IP Guard I/O Safety Module and GuardLogix Integrated Safety Controller Safety Rating: Category 3 (also see Achieving a Cat. 4 Safety Rating)

More information

Quick Start. Logix5000 Control Systems: Connect Kinetix 350 Drives over an EtherNet/IP Network

Quick Start. Logix5000 Control Systems: Connect Kinetix 350 Drives over an EtherNet/IP Network Quick Start Logix5000 Control Systems: Connect Kinetix 350 Drives over an EtherNet/IP Network Important User Information Read this document and the documents listed in the additional resources section

More information

Fork Sensors. Technical Data. Plastic Fork Sensors

Fork Sensors. Technical Data. Plastic Fork Sensors Technical Data Fork Sensors Catalog Numbers 5LSP2LNAP, 5LSP2LPAP, 5LSP2LNA2P, 5LSP2LPA2P, 5LSP2LNAP, 5LSP2LPAP, 5LSP2LNAP, 5LSP2LPAP, 5LSTLEAP, 5LSTLEA2P, 5LSTLEAP, 5LSTLEAP, 5LSTLEA5P, 5LSTLEA6P, 5LSTLEA7P

More information

Application Technique. Safety Function: Safety Camera with E-stop

Application Technique. Safety Function: Safety Camera with E-stop Application Technique Safety Function: Safety Camera with E-stop Products: Guardmaster Dual-input Safety Relay, Guardmaster SC300 Safety Camera Safety Rating: PLd, Cat. 3 to EN ISO 13849-1: 2008 2 Safety

More information

Logix5000 Controllers Produced and Consumed Tags

Logix5000 Controllers Produced and Consumed Tags Programming Manual Logix5 Controllers Produced and Consumed Tags Catalog Numbers 1756 ControlLogix, 1756 GuardLogix, 1768 Compact GuardLogix, 1769 CompactLogix, 1789 SoftLogix, PowerFlex with DriveLogix

More information

Logix5000 Controllers Messages

Logix5000 Controllers Messages Programming Manual Logix5000 Controllers Messages Catalog Numbers 1756-L1, 1756-L55, 1756-L61, 1756-L62, 1756-L63, 1769-L31, 1769-L32C, 1769-L32E, 1769-L35CR, 1769-L35E, 1789-L60, 1794-L34, PowerFlex 700S/SE

More information

Using a Guard Locking Interlock Switch and Light Curtains with DeviceNet Guard I/O and a GuardLogix Controller

Using a Guard Locking Interlock Switch and Light Curtains with DeviceNet Guard I/O and a GuardLogix Controller Safety Application Example Using a Guard Locking Interlock Switch and Light Curtains with DeviceNet Guard I/O and a GuardLogix Controller Safety Rating: Category 3, according to EN954-1 Introduction...

More information

Kinetix 5500 Servo Drives

Kinetix 5500 Servo Drives Installation Instructions Kinetix 5500 Servo Drives Catalog Numbers 98-H003-ERS, 98-H008-ERS, 98-H05-ERS, 98-H05-ERS, 98-H040-ERS, 98-H070-ERS, 98-H003-ERS, 98-H008-ERS, 98-H05-ERS, 98-H05-ERS, 98-H040-ERS,

More information

GV3000/SE General Purpose (Volts/Hertz) and Vector Duty AC Drive, HP, 230V AC

GV3000/SE General Purpose (Volts/Hertz) and Vector Duty AC Drive, HP, 230V AC Software Start-Up and Reference Manual D2-3416-2 GV3000/SE General Purpose (Volts/Hertz) and Vector Duty AC Drive, 30-100 HP, 230V AC Version 6.04 Important User Information Solid-state equipment has operational

More information

Installation Instructions

Installation Instructions Installation Instructions (Cat. No. 71-A1B, -A2B, -A3B, -A3B1, -A4B Series B) Because of the variety of uses for the products described in this publication, those responsible for the application and use

More information

Throughout this manual we use notes to make you aware of safety considerations:

Throughout this manual we use notes to make you aware of safety considerations: Because of the variety of uses for the products described in this publication, those responsible for the application and use of this control equipment must satisfy themselves that all necessary steps have

More information

Logix5000 Controllers Produced and Consumed Tags

Logix5000 Controllers Produced and Consumed Tags Logix5 Controllers Produced and Consumed Tags Catalog Numbers 1756 ControlLogix, 1756 GuardLogix, 1768 Compact GuardLogix, 1769 CompactLogix, 1789 SoftLogix, PowerFlex with DriveLogix Programming Manual

More information

ControlLogix SIL2 System Configuration

ControlLogix SIL2 System Configuration ControlLogix SIL2 System Configuration Using RSLogix 5000 Subroutines Application Technique (Catalog Numbers 1756 and 1492) Important User Information 8 / 2011 Solid state equipment has operational characteristics

More information

Micro800 Programmable Controllers

Micro800 Programmable Controllers Micro800 Programmable Controllers Bulletin 2080 Selection Guide Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety

More information

PanelView Plus 7 Standard Terminals

PanelView Plus 7 Standard Terminals Technical Data PanelView Plus 7 Standard Terminals Catalog Numbers 2711P-T4W21D8S, 2711P-T4W21D8S-B, 2711P-T6C21D8S, 2711P-T6C21D8S-B, 2711P-T7C21D8S, 2711P-T7C21D8S-B, 2711P-T9W21D8S, 2711P-T9W21D8S-B,

More information

Trusted Output Power Distribution Unit (Diode Protected)

Trusted Output Power Distribution Unit (Diode Protected) PD_T8297 Trusted Trusted Output Power Distribution Unit (Diode Protected) Product Overview The Trusted Output Power Distribution Unit is designed to provide 24 Vdc - 120 Vdc for use with Trusted Sourcing

More information

Installation Instructions

Installation Instructions Installation Instructions (Cat. No. 1794-TBN) 6 1 5 9 4 2 3 10 6 7 8 Component Identification 1 Female flexbus connector 2 Terminal base unit (1794-TBN) 3 Male flexbus connector 4 Keyswitch Set to the

More information

ArmorBlock 16-Point EtherNet/IP Module

ArmorBlock 16-Point EtherNet/IP Module Installation Instructions ArmorBlock 16-Point EtherNet/IP Module Catalog Numbers 1732E-IB16M12, 1732E-OB16M12, 1732E-16CFGM12, 1732E-16CFGM12W, 1732E-IB16M12W, Series A Topic Page Important User Information

More information

The following modules are North American Hazardous Location approved: 1766-L32AWA, 1766-L32AWAA, 1766-L32BWA, 1766-L32BWAA, 1766-L32BXB, 1766-L32BXBA If you would like a manual, you can: download a free

More information

Application Technique. Products: Guardmaster 440C-CR30 Configurable Safety Relay, PowerFlex 755 Drive. Safety Rating: CAT. 3, PLe to ISO : 2008

Application Technique. Products: Guardmaster 440C-CR30 Configurable Safety Relay, PowerFlex 755 Drive. Safety Rating: CAT. 3, PLe to ISO : 2008 Application Technique Safety Function: Actuator Subsystems Stop Category 0 or Stop Category 1 via a Configurable Safety Relay and PowerFlex 755 Drive with Hardwired Safe Torque-off Products: Guardmaster

More information

PowerFlex 400 Drive Firmware Version 7.01

PowerFlex 400 Drive Firmware Version 7.01 Release Notes PowerFlex 400 Drive Firmware Version 7.01 Catalog Number 22C These release notes correspond to major version 7, minor version 1 of firmware for the PowerFlex 400 drive. The following information

More information

Kinetix 2000 Integrated Axis Module and Axis Module

Kinetix 2000 Integrated Axis Module and Axis Module Installation Instructions Kinetix 2000 Integrated Axis Module and Axis Module Catalog Numbers 2093-AC05-MP1, 2093-AC05-MP2, 2093-AC05-MP5, 2093-AMP1, 2093-AMP2, 2093-AMP5, 2093-AM01, 2093-AM02 Topic Important

More information

Zener Barriers Bulletin 937Z

Zener Barriers Bulletin 937Z Technical Data Zener Barriers Bulletin 937Z Topic Page Introduction 2 Mounting 2 Housing 3 Operating Principle 3 Specifications 6 Introduction Allen-Bradley Zener barriers are a cost-effective solution

More information

DeviceNet ArmorBlock Network Powered 16-input Module, Series A

DeviceNet ArmorBlock Network Powered 16-input Module, Series A Installation Instructions DeviceNet ArmorBlock Network Powered 16-input Module, Series A Catalog Number 1732D-IB161212D Topic Page Important User Information 2 Environment and Enclosure 3 Prevent Electrostatic

More information

Remote I/O Scanner. Catalog Number 1747-SN. Installation Instructions. Publication

Remote I/O Scanner. Catalog Number 1747-SN. Installation Instructions. Publication Remote I/O Scanner Catalog Number 1747-SN Installation Instructions 2 Remote I/O Scanner Important User Information Because of the variety of uses for the products described in this publication, those

More information

DeviceNet ArmorBlock Network and Auxiliary Powered I/O Module

DeviceNet ArmorBlock Network and Auxiliary Powered I/O Module Installation Instructions DeviceNet ArmorBlock Network and Auxiliary Powered I/O Module Catalog Number 1732D-8X81212D Topic Page Important User Information 2 Environment and Enclosure 3 Prevent Electrostatic

More information

PCI 2 Axis Servo Card

PCI 2 Axis Servo Card Installation Instructions PCI 2 Axis Servo Card (Catalog Number 1784-PM02AE) This manual provides the instructions for installing the PCI 2 Axis Servo card (1784-PM02AE) in a PC computer using the NT operating

More information

ArmorBlock 2-Port EtherNet/IP Module

ArmorBlock 2-Port EtherNet/IP Module Installation Instructions ArmorBlock 2-Port EtherNet/IP Module Catalog Numbers 1732E-IB16M12R, 1732E-OB16M12R, 1732E-IB16M12DR, 1732E-OB16M12DR, 1732E-16CFGM12R, 1732E-IB16M12SOEDR, 1732E-8X8M12DR Table

More information

DeviceNet ArmorBlock Network and Auxiliary Powered Module, Series A

DeviceNet ArmorBlock Network and Auxiliary Powered Module, Series A Installation Instructions DeviceNet ArmorBlock Network and Auxiliary Powered Module, Series A Catalog Number 1732D-8X81212HD Topic Page Important User Information 2 Environment and Enclosure 3 Prevent

More information

DeviceNet Communications

DeviceNet Communications DeviceNet Communications For PanelView Plus and PanelPlus CE Terminals 2711P User Manual Important User Information Solid state equipment has operational characteristics differing from those of electromechanical

More information

Bidirectional (4-sensor, T-type) Muting With MSR42 Relay Connected Components Building Block

Bidirectional (4-sensor, T-type) Muting With MSR42 Relay Connected Components Building Block Bidirectional (4-sensor, T-type) Muting With MSR42 Relay Connected Components Building Block Catalog Numbers MSR42, MicroLogix 1100, GuardShield Micro 400 Light Curtains Quick Start Important User Information

More information

Isolated 24V dc Output Module

Isolated 24V dc Output Module Installation Instructions Isolated 24V Output Module (Cat. No. 1771OQ Series B) Contents Use this document as a guide when installing the catalog number 1771OQ Series B isolated output module. To See page

More information

Trusted 40 Channel Digital Input Versatile FTA

Trusted 40 Channel Digital Input Versatile FTA PD-T8843 Trusted Trusted 40 Channel Digital Input Versatile FTA Product Overview The Trusted 40 Channel Digital Input Versatile Field Termination Assembly (VFTA) T8843 is designed to act as the main interface

More information

PCI 2 Axis Servo Card

PCI 2 Axis Servo Card Installation Instructions PCI 2 Axis Servo Card (Catalog Number 1784-PM02AE) This manual provides the instructions for installing the PCI 2 Axis Servo card (1784-PM02AE) in a PC computer using the NT operating

More information

Kinetix 6200 and Kinetix 6500 Control Modules

Kinetix 6200 and Kinetix 6500 Control Modules Installation Instructions Kinetix 600 and Kinetix 6500 Control Modules Catalog Numbers 094-SE0F-M00-S0, 094-SE0F-M00-S1, 094-EN0D-M01-S0, 094-EN0D-M01-S1 Topic Page About the Control Modules 1 Catalog

More information

Using the Safety Distribution R Box

Using the Safety Distribution R Box Safety Application Example Using the Safety Distribution R Box Introduction...2 Important User Information...2 General Safety Information...3 Description...4 SensaGuard Connections...8 Tongue Interlock

More information

IntelliCENTER IEC Integration Unit

IntelliCENTER IEC Integration Unit Installation Instructions Original Instructions IntelliCENTER IEC 61850 Integration Unit Catalog Numbers 3300A-IU10J-A1-1, 3300A-IU10J-A1-1-PVP, 3300A-IU10J-A1-1-SSA, 3300A-IU10J-A1-1-PVP-SSA, 3300A-IU10J-A1-2,

More information

Trusted Power Distribution Unit 15-Way Fused

Trusted Power Distribution Unit 15-Way Fused PD_T8293 Trusted Trusted Power Distribution Unit 15-Way Fused Product Overview The Trusted Power Distribution Unit 15-way Fused provides 15 dual redundant fused power outputs from dual redundant 24 Vdc

More information

Micro800 Programmable Controllers: Getting Started with Motion Control Using a Simulated Axis

Micro800 Programmable Controllers: Getting Started with Motion Control Using a Simulated Axis Quick Start Micro800 Programmable Controllers: Getting Started with Motion Control Using a Simulated Axis Catalog Numbers Bulletin 2080-LC30, 2080-LC50 Important User Information Solid-state equipment

More information

Micro800 Programmable Controllers, Plug-In Modules, and Accessories. Bulletin 2080 Selection Guide

Micro800 Programmable Controllers, Plug-In Modules, and Accessories. Bulletin 2080 Selection Guide Micro800 Programmable Controllers, Plug-In Modules, and Accessories Bulletin 2080 Selection Guide Important User Information Solid state equipment has operational characteristics differing from those of

More information

CompactBlock Guard I/O EtherNet/IP Safety Modules

CompactBlock Guard I/O EtherNet/IP Safety Modules Installation Instructions CompactBlock Guard I/O EtherNet/IP Safety Modules Catalog Numbers 1791ES-IB8XOBV4, 1791ES-IB16 Topic Page Important User Information 2 North American Hazardous Location Approval

More information