Equipped with Vertical Machining Center

Transcription

1 Machining Center Equipped with Vertical Machining Center

2 Durable Universal Reliable Affordable Accurate Dura means new value in machine tools With its strength through simplicity and high flexibility and versatility, the Dura Series offers the confidence of stable operation and high-precision, high-quality machining, with excellent cost performance. In order to meet all the requirements demanded of a machine tool, we thoroughly refined the basic functions to create a completely new machine. This new concept machine, which takes basic performance and reliability to the highest level, will provide powerful support for our customers machining.

3 Vertical Machining Center Photo: 5060 Within Japan, only the 5060 will be sold. C O N T E N T S High precision/high-precision equipment/machining ability 4 Basic structure 5 Operability, Maintenance 6 Peripheral equipment 7 MAPPS 8 General view 12 MAPPSMori Advanced Programming Production System Standard & Optional features 13 Numerical control unit specifications 14 Machine specifications 15 The photo shows the machine outfitted with options. Actual nameplate layout may differ from the photo. Figures in inches were converted from metric measurements.

4 High precision Roundness Machine type Previous model 5060 Roundness <actual results> <Actual results> 5060 Material <JIS> Tool Machining diameter Spindle speed Cutting feedrate A5052 (Aluminum) End mill 20 mm ( 3/4 in.) <4 teeth> 110 mm( 4.3 in.) 6,000 min -1 2,000 mm/min (78.7 ipm) A5052 (Aluminum) Carbide end mill 16 mm ( 5/8 in.) <4 teeth> 90 mm( 3.5 in.) 6,000 min -1 2,000 mm/min (78.7 ipm) This value was achieved on a machine installed according to Mori Seiki s specified conditions, with an ambient temperature of 22 C. Filter1-50 High-precision equipment Coolant cooling unit (separate type) The coolant temperature rises because of heat generated by machining. Circulating the coolant also raises the temperature. Increases in the oil temperature have a major effect on thermal displacement in the machine and the dimensional accuracy of the workpiece. This unit prevents the coolant from heating. When using oil-based coolant, the oil temperature can become extremely high even with the standard coolant pump, so we strongly recommend this unit. Please consult with your Mori Seiki representative if you are using oil-based coolant. We cannot guarantee that this unit will completely control the coolant temperature. It is designed to help prevent oil temperature increases. Machining ability Face milling Other company s machine Previous model 5060 Material removal rate Material <JIS> Tool diameter Spindle speed Feedrate Depth of cut S45C 50 mm ( 2 in.) 796 min mm/min (25.0 ipm) 2.5 mm (0.10 in.) S45C 80 mm ( 3.1 in.) 600 min mm/min (18.9 ipm) 2.0 mm (0.08 in.) S50C 80 mm ( 3.1 in.) <7 teeth> 1,000 min -1 1,890 mm/min (74.4 ipm) Material removal rate <comparison with previous model> 2.5 mm (0.10 in.) 3.9 Drilling Other company s machine Previous model 5060 Material removal rate Material <JIS> Tool diameter Spindle speed Feedrate S45C 25 mm ( 1 in.) 318 min mm/min (1.9 ipm) S45C 38 mm ( 1.5 in.) 210 min mm/min (0.8 ipm) S50C 35 mm ( 1.4 in.) <2 teeth> 227 min -1 Material removal rate <comparison with previous model> 61 mm/min (2.4 ipm) 1.3 Tapping Other company s machine Previous model 5060 Tool Material <JIS> Spindle speed Feedrate S45C 298 min mm/min (23.5 ipm) S45C 95 min mm/min (11.2 ipm) S50C 106 min mm/min (14.6 ipm) JIS: Japanese Industrial Standard S45C, S50C Carbon steel The cutting test results indicated in this catalog are provided as an example. The results indicated in this catalog may not be obtained due to differences in cutting conditions and environmental conditions during measurement.

5 Option Basic structure Body size Machine type Previous model Width mm (in.) 2, ) 1,900 (74.8) 2,180 (85.8) 2,740 (107.9) Height Depth mm (in.) 2, ) 2,400 (94.5) Height <from floor> mm (in.) 2, ) 2,674 (105.3)<at shipment 2,566 (101.0)> Depth Width Work envelope Machine type Previous model 5060 Compared with conventional machine X-axis travel mm(in.) 560 (22.0) 600 (23.6) times longer Y-axis travel mm (in.) 410 (16.1) 530 (20.9) times longer Z-axis travel mm (in.) 460 (18.1) 510 (20.1) times longer Table working surface mm (in.) ( ) ( ) times bigger Table loading capacity kg (lb) 300 (660) 500 (1,100) times bigger Z-axis Y-axis X-axis Spindle Max. spindle speed min -1 10,000 Spindle acceleration time sec ,000 min -1 Spindle speed-torque/output-rotation speed diagram Max. spindle speed 10,000 min -1 15/11 kw (20/15 HP) <5 min/cont> Spindle deceleration time sec ,0000 min -1 Tool-clamping force N (lbf) 7,840 (1,762.4) Spindle lubrication Oil-air lubrication Oil supply volume is held to the minimum, reducing friction and loss. The air purge effect also preventsdust penetration. Oil jacket cooling An oil jacket is placed around a spindle to suppress thermal displacement.

6 Operability, Maintenance Adjustable operating panel Available distance Door opening width 785 mm (30.9 in.) 900 mm (35.4 in.) 640 mm (25.2 in.) mm (8.7 in.) An easy-to-use operation panel which can swivel from Visibility while operating is also improved. To make setup operations easier, the distance from the front of the machine to the spindle is shorter. With a wider door opening than conventional machines, workpiece loading and unloading and maintenance inside the machine is easier. <with automatic door specifications, 630 mm (24.8 in.)> Internal chip conveyor (spiral type) Workpiece delivery (with hand lift) Workpiece delivery (with crane) 650 mm (25.6 in.) 95 mm (3.7 in.) 723 mm (28.5 in.) The spiral type internal chip conveyor is standard. This improves chip disposal capacity. With a space at the base of the machine which gives better access for hand lifts, heavy workpieces can be loaded and unloaded easily. The ceiling shutter opens and closes, allowing smooth setup changes using a crane. Daily maintenance & inspection Chip bucket (front ejection type) Tool clamp/unclamp button Spindle head side 285 mm (11.2 in.) Rear of machine To reduce the time for maintenance and inspection, equipment which requires frequent inspection is placed behind the machine. The chip bucket can be pulled out to the front, keeping maintenance space to the minimum. Operation panel side To make tool clamp/unclamp easier, we have put a tool clamp/unclamp button on both the operation panel side and the spindle head side on all models.

7 Option Peripheral equipment External chip conveyor Available specifications Workpiece material and chip size OptimumPossible Not suitable Steel Cast metal Aluminum, non-ferrous metal Long Short Powdery Short Long Short Powdery Hinge type Scraper type Magnet scraper type Approximate chip size Short: chips shorter than 50 mm (2.0 in.), blocks of chips shorter than 40 mm (1.6 in.). Long: chips longer than those indicated above. The options table below the general options when using coolant. Changes may be necessary if you are not using coolant, or depending on the amount of coolant, compatibility with machines, or the specifications required. Please select a chip conveyor to suit the shape of your chips. When machining special or difficult-to-cut material (cutting hardness HRC 45 or higher), please consult with your Mori Seiki representative. Through-spindle coolant system The through-spindle coolant system effectively eliminates chips, cooling the machine point and lengthening the lives of your tools. Recommended equipment Coolant cooling unit (separate type) Discharge pressure 7.0 MPa (1,015 psi) Discharge pressure 1.5 MPa (217.5 psi) Coolant tank Side-through Center-through High-pressure coolant system (separate type) High-pressure coolant system Tank-mounted coolant The high-pressure coolant unit generates a lot of heat because it discharges coolant at high pressure. The coolant cooling unit controls the temperature of the coolant and suppresses temperature increases in the workpiece, tools and table, ensuring stable machining accuracy. This is essential equipment when using high-pressure coolant. A unit with a heater will be customized. Oil mist collector Coolant gun (Machining side) Signal tower (3-stage)

8 A New High-Performance Operating System for Machining Centers The CPU s processing power has been improved, with many functions which dramatically reduce the time for programming and setup. The 3rd generation NC unit MAPPS is designed for productivity. A new interface connecting person and machine inch operation panel Improved hardware specs Equipped with a USB interface Data can be transferred easily between the machine and your PC. ( For the USB memory, please use Mori Seiki specified products. We cannot guarantee correct operations with other peripheral equipment such as USB hard disks) A large MAPPS user memory area We have prepared an area which is separate from the NC memory, where programs can be stored in MAPPS. Standard 50 MB <tape memory length equivalent to 127,000 m (416,687 ft)> Card DNC operation 1 GB Select the program needed from within the user memory area and use it for DNC operation for the NC unit. ( Macro programs such as GOTO, IF and WHILE cannot be used in DNC operating programs) Programs in the user memory area can be edited, copied, deleted and renamed. (Programs up to 10 MB can be edited on the spot) A handy calculator function Network A calculator key is included, allowing the operator to call up a function calculator from any screen. MORI-SERVER Standard feature A network-enabled data management system for high-speed transfer of data between computer and machine. MORI-NET Global Edition Mori Seiki s MORI-NET Global Edition is a customer support service using the Internet. Programs can be transferred between the user memory area and an external device such as an NC memory, an RS-232-C connection, a card interface, a USB interface or the MORI-SERVER. Programs that call sub-programs stored in the user memory area using M98/G65 must be stored in the NC memory. Card DNC operation transfer speed: the maximum feed speed is 15 m/min for a program with 25-character blocks at a pitch of 1 mm. (These are not absolute values, and feedrate may occasionally deteriorate) Please see the product catalog for details. The photo shown may differ from actual machine. MAPPS: Mori Advanced Programming Production System

9 Option Faster creation of programs Conversational automatic programming Machining menu List display function Much of the programming process has been simplified due to the minimal key entry required for even the most complex shapes. Customers who often use the conversational function will be able to create programs more quickly by entering a lot more data on a single screen. For this reason, as well as the standard screen, we have prepared a list display function which allows you to enter conversational data on a single screen, and which can be used just by switching the parameters. Contour input Conversational direct operation function and conversational direct drawing function Automatic cross-point calculation function<patented in Japan> By entering the drawing dimensions, the necessary intersections and contact points for the program are automatically calculated. Circles and lines can be drawn as an extension of shapes, and it is easy to rotate or invert the shapes. Conversational data entered based on the drawings can be used to perform a drawing check (direct drawing) and to carry out direct operation, all without creating an NC program. After entry of the conversational data, the data can immediately be used for operation, reducing the setup time. Mirror Rotation Island shapes, open pockets MORI-POST advanced mode DXF import function Up to 127 islands can be defined. Definition of open pockets eliminates tool paths with no machining allowance, making it possible to create optimum paths. This function allows you to customize NC programs created using the MAPPS or MORI-AP Series automatic programming functions. It lets you make detailed NC programs to suit your needs. By importing 2D CAD data (DXF data), data for workpieces with complex contours can be input easily.

10 A New High-Performance Operating System for Machining Centers Faster creation of programs Program editing function Creating programs G code editing function Program check Extended editing A large number of sub-menus is available. Search Replace Top End Select Copy Cut Paste Simultaneous 3-way split display Three different screens can be displayed at once. The screens can be switched easily using the soft keys. Insert row Insert sequence No. Edit two programs simultaneously (background editing) Rapid registration Full programs and portions of programs that are used frequently can be registered and later pasted into other programs with a single operation. Program Coordinate display Tool info Synchronized drawing Register Insert Editing line number display, Undo/Redo function This allows for mistakes to be corrected when creating a program. Displays line number being edited Edited line numbers are displayed in red Actions can be undone any number of times (up to 400 kb) Batch replaces can also be undone or redone in a single step Simulations which are synchronized with actual machining can be made on the program check screen. Help When you get stuck, the G code guidance and PLC message details function are useful. High-speed canned cycles 1. High-speed side milling cycle 2. Z Feeding groove cycle 3. Trochoid cycle 4. Helical hole cycle 5. Surface cutting cycle 6. Square pocket cycle 7. Corner pocket cycle 8. Spherical milling cycle Number of patterns Thread milling cycle 10. Elliptical milling cycle 11. Polygonal milling cycle 12. Bolt-hole cycle 13. True circle cutting cycle 14. Pocket cutting cycle 15. Flat beveling chamfer cycle 16. Keyslot chamfer cycle Program management Sorting Data can be sorted according to different criteria. Group management Programs can be managed in groups for easier searching. Status display The status of the program - No Editing, Foreground and Background - is displayed. By number By date By size By comment Custom display Choose which information you want displayed. Date Size Comment Display/hide group

11 Option Faster setup Current tool offset Operators can display only the tools used in the current program. Work offsets can also be displayed. Minimizing machine down time Limit switch guidance function Insufficiency check This function searches the program for tools that are not registered in the tool magazine, eliminating tool registration errors that can occur. The status (on/off) of the limit switch can be checked, along with the layout diagram, without having to look at the electric diagram, shortening the time it takes to perform maintenance. Regular maintenance function Registration of tool comments The tool name and other comments can be registered for each tool number on the tool registration screen. Once a predetermined amount of time has passed, the screen automatically jumps to maintenance items that need attention. MORI Automatic Programming System for Machining Centers The comments set on the tool registration screen are also applied to the offset numbers for tool offset. Application systems which let you create machining programs easily on your PC. Easy operation, simply by entering the product shapes while following the instructions on the screen. Its functions, data and operability are fully compatible with the conversational programming system of the MAPPS operating systems. Prevent incorrect input of offset

12 General view Front view mm (in.) ( ) () Side view Plan view Chip conveyor (option) Hinge type Scraper type Hinge type <EN Standards> Scraper type <EN Standards> A mm (in.) 960 (37.8) 794 (31.3) 779 (30.7) 1,278 (50.3) 1,281 (50.4) 1,060 (41.7) 1,059 (41.7) 1,045 (41.1) B mm (in.) 1,005 (39.6) 1,013 (39.9) 1,005 (39.6) 1,028 (40.5) C mm (in.) 2,860 (112.6) 3,140 (123.6) 3,700 (145.7) 2,694 (106.1) 2,974 (117.1) 3,519 (138.5) 3,178 (125.1) 3,461 (136.3) 4,021 (158.3) 2,960 (116.5) 3,239 (127.5) 3,785 (149.0)

13 Standard & Optional features : Standard: Option: Not available Spindle Spindle speed 10,000 min -1 Spindle cooling specifications BT40 (dual contact) ATC Type of tool shank Type of retention knob Coolant Through-spindle coolant system Through-spindle coolant system interface BT40 CAT40 DIN40 MORI SEIKI DIN Separate type Coolant tank top installation type Separate type <only for Ogura Clutch> Coolant tank top installation type Side-through <7.0 MPa (1,015 psi)> Center-through <7.0 MPa (1,015 psi)> Side-through <1.5 MPa (217.5 psi)> Center-through <1.5 MPa (217.5 psi)> Side-through <7.0 MPa (1,015 psi)> Center-through <7.0 MPa (1,015 psi)> Side-through <1.5 MPa (217.5 psi)> Center-through <1.5 MPa (217.5 psi)> Shower coolant system Coolant cooling unit (separate type) <required when using oilbased coolant> Made by Matsushita Electric Industrial Co., Ltd. Coolant unit Tool tip The center-through coolant unit discharge pressure is usually 1.5 MPa (217.5 psi), but at 50Hz it will become 1.3 MPa (188.5 psi). With the system manufactured by Ogura Clutch, only discharge pressure of 7.0 MPa (1,015 psi) is available. Safety features Full cover Door interlock system Earth leakage breaker Tool magazine Tool storage capacity 30-tool Chip disposal Internal chip conveyor Spiral type Chip bucket Front ejection type Chip bucket (for external chip conveyor) Chip conveyor <discharge height 1,000 mm (31.5 in.)> Made by Tsubakimoto Mayfran, Inc. Hinge type <left disposal type> Scraper type <left disposal type> Magnet scraper type <left disposal type> Chip conveyor interface Left disposal type Coolant gun (machining side) Air blow Tool tip <compressed air supply of 300 L/min (79.2 gpm) is required for regular use> Operation support device/function Robot interface (incl. separate electrical cabinet) Indexable table interface cannot be selected Built-in worklight Automatic power-off system Workpiece counter <screen display> Automatic door With a tape switch Manual pulse generator <separate type> Signal tower 3-stage Additional in-machine light Measurement In-machine workpiece measurement system <probe sensor> In-machine tool measurement system <table-mounted sensor> Others Interface for rotary tables (with a motor, without a motor) Optical type <RENISHAW> Sensor <OMRON> 4/4000i A06B B000) 8/3000i A06B B000) Made by Nikken Kosakusho Works: CNC180LFA 1, CNC202LFA, CNC260LFA Made by Tsudakoma Corp. RNA-160L, RNA-200L Others Made by Tsudakoma Corp.: RNA-250L Others 12/3000i (A06B B100) Others Rotary table For models compatible with interface only Hydraulic fixture interface (2 hydraulic circuits+1 workpiece seating detection circuit) Made by Akamatsu Denki: HVS Oil mist collector Made by Akamatsu Denki: HVS Duct diameter 125 mm (4.9 in.) for HVS-100 Oil mist collector interface (duct only) External M-code Duct diameter 150 mm (5.9 in.) for HVS Duct diameter200 mm (7.9 in.) for HVS Coolant tank For hand lift Positioning block (for angle head) ATC shutter Dry anchor Indexable table interface Robot interface cannot be selected 1 Can be used with 4/4000i specifications. 2 Power must be supplied from outside, and is turned ON/OFF by the mist collector. The power supply for the mist collector is either 200 V or 220 V. The mist collector cannot be used in the countries whose power voltage is outside of these specified values. A separate mist collector interface is required. 3 Recommended by Mori Seiki Max. spindle speed: Depending on restrictions imposed by the workpiece clamping device, fixture and tool used, it may not be possible t o rotate at the maximum spindle speed. The details given above and the specifications are subject to change without notice. The information in this catalog is valid as of February Some options are not available in particular regions. For details contact Mori Seiki.

14 Numerical control unit specifications (MSX-504 ) StandardOptionNon available Controlled axes Controlled axes X, Y, Z Simultaneously controllable axes 4 Program input Least input increment mm ( in.) Least command increment mm ( in.) Max. command value ±99, mm (±9, in.) Absolute/Incremental programming Decimal point input Inch/Metric conversion Interpolation Positioning Linear interpolation You can change the electrical calculator type decimal point programming by changing a parameter. Circular interpolation CW/CCW Cylindrical interpolation Helical interpolation Full 2nd axis and 1 other axis Linear acceleration/deceleration after cutting feed interpolation Linear acceleration/deceleration before cutting feed interpolation Bell-shaped acceleration/deceleration for rapid traverse Feedrate Cutting feedrate Pulse handle feed Automatic acceleration/ deceleration 1 mm/min20,000 mm/min ( ipm) <AI look-ahead control (theoretical values)> 1 mm/min6,000 mm/min ( ipm) <non-look-ahead control> Manual pulse generator: 1 units 1, 10, 100 <per pulse> Bell-shaped <rapid traverse>/ Linear type <cutting feed> Rapid traverse rate override F0/1/10/25/100% Feedrate override 0200 <10% increments> Feedrate override cancel Spindle orientation Manual jog feed Feed per minute Feed per revolution F1-digit feed Program storage and editing 05,000 mm/min ( ipm) <20 steps> Program storage capacity 640 m (2,100 ft) <256 kb> Program editing Deletion, alteration, and insertion Number of stored programs 400 programs Program number/program name 4 digits/31 characters Operation and display Operation panel: Display section 10.4-inch TFT color LCD Display function Running time display/number of parts display Current position, command value, correction value, parameter, comment, ladder diagram Clock function Screen display I/O Functions and units I/O interface RS-232-C Screen hard copy Tape operation with RS-232-C External sub-program call Memory card interface User memory area 50 MB (for card DNC operation functions and data back-up) Fast data server Files up to 10 MB in size can be edited ATA card 1 GB CF card 1 GB + ATA adapter DNC with the memory card User memory area 1 GB (for card DNC operation functions and data back-up) STM functions Files up to 10 MB in size can be edited Spindle speed function (S function) 5-digit S code Spindle speed override % (10% increments) Tool function (T function) 4 digit T code Miscellaneous function (M function) 4-digit M code Tool offset Tool length offset Tool position offset Tool diameter offset C Number of tool offsets Tool offset data memory C MAPPS Tool Management System Coordinate system Manual zero return Automatic zero return 2nd zero return 3rd and 4th zero return Zero return check Return from zero point Automatic coordinate system setting Coordinate system setting Workpiece coordinate system selection Local coordinate system setting Machine coordinate system Number of workpiece coordinate systems Workpiece coordinate system preset Operation support functions Single block Optional stop Optional block skip Dry run Machine lock Auxiliary function lock Mirror image Z-axis command cancel Set zero Sequence number collation and stop Expanded tape editing Background editing Load meter display 400 sets (diameter + length = 1 set, number of offsets indicates that diameter and length are displayed separately) D/H code, geometry and wear offset data 48 sets Only possible with relative coordinates Removing controlled axes Parameter Programming support function User-defined angle, chamfer, corner R designation Hole machining canned cycle Sub-program Up to 4 nestings Custom macro Programmable mirror image Automatic corner override Exact stop check Exact stop check mode Programmable data input Programmable parameter input Substitute for programmable data input Custom macro common variables: 600 variables Scaling Coordinate system rotation Polar coordinate command F10/11 format Synchronized tapping Automatic corner deceleration Feed speed clamp by circular radius AI look-ahead control AI contour control High-speed canned cycle High-speed side milling cycle Trochoid cycle Surface cutting cycle Corner pocket cycle Thread milling cycle Polygon milling cycle True circle cutting cycle Flat beveling chamfer cycle Island shape, open pocket Mori-Post Advanced Mode DXF import function Z Feed groove cycle Helical hole cycle Square pocket cycle Spherical milling cycle Elliptical milling cycle Bolt-hole cycle Pocket cutting cycle Keyslot chamfer cycle Mechanical accuracy compensation Backlash compensation ±9,999 pulses Pitch error compensation Uni-directional positioning Rapid traverse/cutting feed backlash compensation Machine control support function Axis interlock Automatic support function Tool life management 128 sets High-speed skip terminal interface (for in-machine workpiece measuring system specifications) Safety and maintenance Emergency stop Overtravel Self-diagnosis Door interlock Alarm history display Help function Operation history display Operator message history display Software damper Includes alarm display, I/O signal diagnosis and ladder diagram Used for abnormal load detection function The information in this catalog is valid as of February 2008.

15 Machine specifications Travel Table Spindle Feedrate ATC Item X-axis travel <longitudinal movement of table> mm (in.) 600 (23.6) 800 (31.5) 1,050 (41.3) Y-axis travel <cross movement of saddle> mm (in.) 530 (20.9) Z-axis travel <vertical movement of spindle head> mm (in.) 510 (20.1) Distance from table surface to spindle gauge plane mm (in.) ( ) Table working surface mm (in.) ( ) 1, ( ) 1, ( ) Table loading capacity kg (lb.) 500 (1,100) 800 (1,760) 1,000 (2,200) Table surface configuration 18 mm (0.7 in.) T-slot6 Max. spindle speed min -1 10,000 Number of spindle speed ranges Stage 1 Type of spindle taper hole No.40 Spindle bearing inner diameter mm (in.) 70 (2.8) X-axis mm/min (ipm) 36,000 (1,417.3) Rapid traverse rate Y-axis mm/min (ipm) 36,000 (1,417.3) Z-axis mm/min (ipm) 20,000 (787.4) Cutting feedrate mm/min (ipm) 1-6,000 ( ) 1-20,000 ( ) <When using look-ahead control (theoretical values)> Jog feedrate mm/min (ipm) 1-5,000 ( ) <20-stage> Type of tool shank BT40 CAT40 Type of retention knob MORI SEIKI 90 MAS- 45 MAS- 60 Tool storage capacity 30 With adjacent tools mm (in.) 80 (3.1) Max. tool diamete Without adjacent tools mm (in.) 125 (4.9) Max. tool length mm (in.) 300 (11.8) Max. tool mass kg (lb.) 8 (17.6) Method of tool selection Technical memory random Tool-to-tool s 1.3 Motors Power sources Tool changing time Chip-to-chip The time differences are caused by the different conditions (travel distances, etc) for each standard. ISO , JIS B s Max. tool changing time 9.20 Min. tool changing time 3.46 MAS 011 s 4.13 VDI s 4.10 Spindle drive motor <5 min/cont> kw (HP) 15/11 (20/15) <High-speed winding side> Feed motor kw (HP) X, Y: 1.8 (2.4) Z: 2.5 (3.3) Coolant pump motor kw (HP) (0.84)50 Hz )60 Hz Electrical power supply kva Compressed air supply MPa (psi), L/min (gpm) 0.5 (72.5), 200 (52.8) <ANR> Tank capacity Coolant tank capacity L (gal.) 160 (42.2) 200 (52.8) 300 (79.2) Machine size Option Machine height (from floor) mm (in.) 2,674 (105.3) <at shipment 2,566 (101.0)> Floor space (width depth) mm (in.) 1,9002,400 ( ) 2,180 2,400 ( ) 2,740 2,400 ( ) Mass of machine kg (lb.) 5,800 (12,760) 6,100 (13,420) 6,400 (14,080) Max. spindle speed: Depending on restrictions imposed by the workpiece clamping device, fixture and tool used, it may not be possible to rotate at the maximum spindle speed. ANR: ANR refers to a standard atmospheric state; i.e., temperature at 20 C (68 F); absolute pressure at kpa (14.7 psi); and relative humidity at 65%. Power sources, machine size: the actual values may differ from those specified in the catalog, depending on the optional features and peripheral equipment. The information in this catalog is valid as of February 2008.

16 <Precautions for Machine Relocation> EXPORTATION: All contracts are subject to export permit by the Government of Japan. Customer shall comply with the laws and regulations of the exporting country governing the exportation or re-exportation of the Equipment, including but not limited to the Export Administration Regulations. The Equipment is subject to export restrictions imposed by Japan and other exporting countries and the Customer will not export or permit the export of the Equipment anywhere outside the exporting country without proper government authorization. To prevent the illegal diversion of the Equipment to individuals or nations that threaten international security, it may include a Relocation Machine Security Function that automatically disables the Equipment if it is moved following installation. If the Equipment is so-disabled, it can only be re-enabled by contacting Mori Seiki or its distributor representative. Mori Seiki and its distributor representative may refuse to re-enable the Equipment if it determines that doing so would be an unauthorized export of technology or otherwise violates applicable export restrictions. Mori Seiki and its distributor representative shall have no obligation to re-enable such Equipment. Mori Seiki and its distributor representative shall have no liability (including for lost profits or business interruption or under the limited service warranty included herein) as a result of the Equipment being disabled. DCG, DDM, BMT and ORC are trademarks or registered trademarks of Mori Seiki Co., Ltd. in Japan, the USA and other countries. If you have any questions regarding the content, contact your nearest Mori Seiki distributor or Technical Center. The information in this catalog is valid as of February 2008 Designs and specifications are subject to change without notice. Mori Seiki is not responsible for differences between the information in the catalog and the actual machine. DURAVERTICAL-EB01V V.0802.CDT.0000 Created in Japan