Matrix Plus. digital intercom systems

Transcription

1 Matrix Plus digital intercom systems

2 The Matrix Plus 3 production comm connect multiple program audio in of interfaces give communications party-line or cam devices, and wire the highest audio Matrix Plus digital intercom systems that are expandable, MODULAR DESIGN The system design is highly modular, allowing for long-term expansion, plus the ability to customize to the exact needs of the user. The modular system consists of: a central card frame plus 8-port matrix cards where all audio switching and level adjustments occur; a wide variety of dedicated and modular intercom stations; and a set of modular interfaces to other communications equipment. With these basic elements, virtually any type of intercommunications system can be created. BROADCAST-QUALITY AUDIO Digital signal processing within the matrix frame, along with carefully designed audio circuitry, yields pristine audio and extremely low noise. Even when combining multiple sources, voices and program sources are clear and distinct. High +18 db output levels drive camera intercoms, earpieces, headphones, and IFB receivers directly from the matrix I/O ports. DDSP INTERNAL COMMUNICATIONS Patented distributed digital signal processing (DDSP) is the key to the incredibly fast and reliable communications of Matrix Plus 3, also yielding compact size and high system capacity. Each matrix card processes the audio signals from its eight send and receive channels (ports), and communicates directly with the other boards, digitally in real time. No central processor is present a potential bottleneck in larger systems even with the most powerful processors. MULTIPLE ON-BOARD CONFIGURATIONS The Matrix Plus 3 stores multiple configurations full system setups on-board for rapid recall and changeover of the system at the push of a button. Build up to four different configurations to cover your various operational scenarios and keep them in the system s memory, with the ability to edit them both on-line or off-line. Maintain as many configurations as you require on the programming computer, and download them as needed to the system. THE MATRIX CARDS Advanced circuit design is the hallmark of Matrix Plus 3. Precision 8-layer surface-mount boards contain custom DSP chips and processors. Boards are hot-patchable, allowing system expansion and maintenance during ongoing operations. SYSTEM FRAMES The matrix card frames hold a configuration card, where the system setup resides, and a quantity of eight-port matrix cards. Digital audio and digital communication busses are built into the frame. Both main and redundant power supplies, with audible alarm, are included. The Compact 72 offers up to 72 full-duplex ports in 6 RU, and the System 200 offers up to 200 ports in 9 RU. The 2-RU MicroMatrix frame holds up to three matrix cards for 24 ports, has six integral relay and GPI circuits, plus slots for two interface modules. 2

3 digital intercom system is a total unications network, designed to full-duplex channels of voice and any desired combination. A variety easy, reliable connection with other systems such as telephone, radio, era intercom, relays, control less intercommunications all with quality. Compact 72 System Frame flexible, and dependable CONNECTIONS TO THE FRAMES Connections to intercom stations, interface modules, and other audio devices are made via 8-conductor RJ-45 connectors. Panels are clearly labeled for ease of installation. POWERFUL, INTUITIVE PROGRAMMING SOFTWARE Powerful, easy-to-use software operating under Windows 95/98/2000/NT is used to create configurations encompassing all operating parameters of the complete system. Customize the matrix to any requirement with easy-to-grasp menus, tables, and contextsensitive help screens. Enable or inhibit features at any station, create groups and point-to-point connections, add passwords and priorities, and more. Create 5-character alpha-numeric labels, assignable to any port/station. Programming may be done on- or off-line, and real-time changes are easily accomplished. Compact 72 Rear Panel PGM-WIN Programming Software

4 System Frames from 8 to 200 ports for all sizes and co Three sizes of digital matrix card frames are provided, allowing flexibility for any type of installation and easy expandability as communications requirements grow. Stations and interfaces work with any of the frames, and the frames work with various generations of stations, helping secure the long-term investment in your production communications system.

5 mplexities of setup SYSTEM 200 The System 200 frame offers up to 200 input/output ports, plus main and redundant power supplies, in a 9-RU card frame. COMPACT 72 The Compact 72 frame offers up to 72 input/output ports, plus main and redundant power supplies, in a 6-RU card frame. MICROMATRIX The MicroMatrix frame is a self-contained 2-RU unit that holds one, two, or three 8-port digital matrix cards, slots for two modular interfaces, and provides six integral GPI (general- purpose input) and six relay circuits. It is also field-upgradable by a technician, allowing a system with 8 or 16 ports to be expanded to the full 24 ports. ANALOG & DIGITAL CARDS Matrix Plus card frames can contain any desired combination of eight-port matrix cards: MVX-A8 analog-transmission cards or MVX-D8 digitaltransmission cards. The frame connects with all Matrix Plus intercom stations, and either directly or through interfaces can connect with telephone lines, two-way radios, wired and wireless party-line intercom systems, cameras, IFB systems, and control systems of various kinds. Virtually any type of intercommunications system can be created. MULTIPLE ON-BOARD CONFIGURATIONS The Matrix Plus 3 stores multiple configurations full system setups on-board for rapid recall and changeover of the system at the push of a button. Build up to four different configurations to cover your various operational scenarios and keep them in the system s memory, with the ability to edit them both on-line or off-line. Maintain as many configurations as you require on the programming computer, and download them as needed to the system. VOX FEATURES AND FUNCTIONS Powerful VOX functions are integral to the system, residing in the MVX matrix cards and selected within the PGM-WIN configuration software. Functions include signal-presence tallies at these stations, voice activation of talk channels and call-signal functions, adjustable noise gating, and opening up preset audio paths with audio signals. ADVANCED COMMUNICATIONS FEATURES Some of the many advanced communications features that the combination of Matrix Plus hardware and software offers are: variable listen levels for each key on each station; adjustablelevel IFB interrupts; page override at stations for emergency communications; priority levels; programming from an attached PC or from certain intercom stations; DSP adjustments for all input and output levels; inward and outward DTMF telephone dialing. REDUNDANT POWER SUPPLIES Main and redundant power-supply modules, with separate AC inputs, come standard with the System 200 and Compact 72. Changeover between power supplies is completely transparent to the system, for fail-safe operation. The unit has both an audible failure alarm and failure relay contacts to activate a remote signal. An overtemperature sensor is connected to both an audible alarm and a warning LED, allowing the system operator to diagnose and correct any power anomalies while the system remains operational. Mix analog or digital cards Main and redundant power supplies Digital signal processing Full-bandwidth audio Variable level IFB interrupt Variable input/output levels +18 db port output level Multiple configurations for rapid setup changes Seamless interfacing with phone, radio, IFB Realtime events logging Interface with Clear-Com and other party-line intercoms Powerful, easy to use software Backwards compatible 5

6 Intercom Stations modular versatile easily configur Matrix Plus intercom key stations are advanced, low-profile units, offered in a variety of configurations. They give complete access and control over the numerous communications pathways within the matrix, so that each intercom position has the precise communications ability it requires. All stations are microprocessor controlled and are fully programmable. When a station is connected to the matrix, it is hot-patchable and self-initiating instantly programmed by the matrix system with its correct configuration. Station keys operate in either momentary or latching modes, and can be programmed to access any audio path, control circuit, or special function in the Matrix Plus system. Any key can be programmed to access a single station (port), a group of stations, a virtual party-line, and to DTMF dial a telephone or activate a communications path with an IFB or a two-way radio. Pushbutton keys may be assigned as talk, listen, or talk with listen. All stations include: listen and talk indicators; the ability to adjust the listen levels for each key; answer-back keys, with display of incoming calls on some stations; rear-panel connections for expansion panels; and integral speaker plus headset and gooseneck mic connectors. Some stations include backlit LED displays and others a write-in strip. They connect to the matrix frame via up to 10,000 feet (3,000 m) of 4-pair data cable. 6

7 able with a snap THE i-series INTERCOM STATIONS The i-series intercom stations are highly modular units that take full advantage of the advanced features of Matrix Plus. A number of models with different features and key counts are offered, and they may be easily expanded or modified in the field. Each 1-RU station front panel is built from a number of smaller modules display and non-display key modules, keypad/programming modules, connector modules, and level-control module. The same basic station architecture can be an 8-key non-display station, a 32-key display station with 16-button keypad, or an expansion or level-control panel. The AUX-101 rear-panel option offers: L & R headset out; balanced program in; hot mic out; line-level out; aux speaker out; aux mic input; plus 8 GPI inputs and 8 SPDT relay outputs that may be used locally or system-wide. Advanced menu features are accessible via the rotary encoder, allowing users to program IFB sources and destinations, party-line and fixed-group membership, cross-point force/inhibit status, camera ISO configurations, master volume for port inputs and outputs, speed dials for telephone interfaces, and more. The i-stations are engineered and built to be long-term rugged and reliable. Chassis of cold-rolled steel and modules of molded aluminum combine with highquality circuit boards, components, connectors, and switches. Super-long-life LED s and full-graphic backlit LCD displays are used throughout. All i-stations feature internal power supplies. THE ICS-SERIES STATIONS The ICS-series stations give the user an excellent balance of high performance and value. They are ideal for use with the MicroMatrix digital intercom system or with the larger Compact 72 and System 200 intercom frames. They are used with the MVX-8A analog matrix cards. The ICS-1016 and ICS-1008 are 1-RU stations. The ICS-1016 features 32 pushbutton keys that can be programmed for talk, listen, or talk-with-listen the ICS-1008 has 16 keys. The EXP-1016 is a 32-key expansion panel that may be used with either of the two stations for additional keys. They are backwards compatible with Matrix Plus II systems. Six function keys control speaker on/off, mic on/off, call/listen level, and listen level up and down. These last keys may also be programmed to activate localpage-override and local-exclusive operations. Gain trim, sidetone, and speaker-setup controls are accessible on the rear panel. This series also includes the ICS-21 single-channel, ICS-22 two-channel, and the ICS-24 four-channel wall-mount stations. The ICS-21 and ICS-22 are speaker stations that can be mounted in either a 4-gang electrical box or the optional DT-Box for tabletop use. The ICS-24 is a speaker station that mounts in a 2-gang electrical box. 7

8 System Interfaces communicate with phones, party-line and camera

9 intercoms, 2-way radios, and more INTERFACE FRAMES The IMF-3 holds up to 11 interface modules in 3-RU. Modular rear-mounted connector panels feature two RJ-45 connectors to the matrix ports and two DB-9 s attaching the connected devices. The frame is used in conjunction with the PSU-101 rack-mountable power supply, providing power to the enclosed interfaces. A second PSU-101 may be attached for redundancy. The IMF-102 interface frame combines an internal power supply, connection for a second redundant supply, a rear input/output connector panel, and slots for two modular interfaces - all in a 1-RU chassis. The compact frame offers a practical way to add a small quantity of interfaces to a MicroMatrix, Matrix Plus, or other digital intercom system. TEL-14 TELEPHONE INTERFACE The TEL-14 is a two-line, auto-nulling digital hybrid telephone interface module. Onboard DSP processors provide greater than 40-dB of trans-hybrid loss, as well as automatic echo-cancellation for the highest intelligibility and audio quality. Enable or disable auto-answer and auto-disconnect. The interface is perfect for establishing IFB connections between the main intercom and remote production trucks, linking intercom communications between remote systems, and enabling telephone calls directly to or from any intercom station in a Matrix Plus or other system. CCI-22 PARTY-LINE INTERFACE The CCI-22 connects two 2-wire full-duplex party-line circuits with the matrix. The interface supports Clear-Com signaling to and from the matrix system, deriving its power from the external party-line circuit. Levels and nulling are completely adjustable. The CCI-22 functions with Clear-Com and other two-wire intercom systems. FOR-22 4-WIRE/RADIO INTERFACE The FOR-22 connects two external 4-wire circuits to the matrix. Camera intercoms, two-way radios, microwave and satellite links, IFB s, and program audio in and out are candidates for the FOR-22. The module provides proper impedance matching, transformer isolation, and level adjustments between systems. It also supports external relay activation and call-sense circuitry. RLY-6 RELAYS The RLY-6 provides six fully programmable SPDT (single pole, double throw) relay outputs, to support dedicated switching functions external to the matrix system. It is not necessary to use audio I/O ports from the matrix to trigger relays and other logic control devices. GPI-6 GENERAL PURPOSE INPUTS The GPI-6 provides six generalpurpose logic inputs into the matrix, allowing external sources to trigger routing changes and other events through the matrix system. IFB-104 IFB ROUTING PANEL The IFB-104 is a 1-RU panel that directly connects up to four IFB feeds to the ports of a digital matrix system. Individual or multiple IFB earbuds or headphones may be powered directly from each connected matrix port. Alternately, an intercom power supply may be connected, allowing the use of active personal IFB receivers, such as the Clear-Com TR-50 or TR-532. The IFB-104 does not require external power to drive its circuitry. Each channel has a rear-mounted wet/dry switch, allowing either direct connection or powering via a party-line intercom power supply. The signal from the matrix port is transformer-coupled to the XLR-connector output. BAL-8 EIGHT-PORT GROUND ISOLATION INTERFACE The BAL-8 is a 1-RU interface containing eight transformer-isolated ports. The unit isolates the connection between Matrix Plus 3 ports and peripheral devices such as two-way radios. PSU-101 POWER SUPPLY The PSU-101 is the power supply for the IMF-3 interface frame. The one-rack-space unit may be connected with a second unit for fully redundant operation. It has both an audible failure alarm and failure relay contacts to activate a remote signal. A single PSU-101 will power a minimum of two interface frames, depending on the type of interfaces and their individual power requirements. Additional power supplies maybe added in installations with a large quantity of interfaces, to provide both sufficient power and redundancy. 9

10 SYSTEM FRAMES I-STATIONS MODULES i-1400 Blank Key Blank Mic i-1420 Blank Keypad Mic i-1410 Function Key No Keypad System 200 i-1430 Function Key w/ Keypad e-1400 Non-Display Display Compact 72 e-1410 Non-Display w/call Key v-1400 Display w/call Key MicroMatrix Stations can be configured with various combinations of modules. v-module KEY STATIONS INTERFACE FRAMES INTERFACES ICS Key Pushbutton Station IMF-3 Interface Frame (with installed interfaces) CCI-22 FOR-22 ICS Key Pushbutton Station IMF-102 Interface Frame w/internal Power Supply EXP Key Pushbutton Expansion Panel PSU-101 Power Supply GPI-6 RLY-6 IFB-104 IFB I/O Break-out Panel ICS-21 Flush-Mount Speaker Station ICS-22 Flush-Mount Speaker Station ICS-24 Flush-Mount Headset Station BAL-8 Transformer Isolation Adapter TEL-14 Back

11 SPECIFICATIONS OVERALL SYSTEM System Capacities System 200: 200 full-duplex audio/data ports Compact 72: 72 full-duplex audio/data ports MicroMatrix: 24 full-duplex audio/data ports MATRIX TYPE DDSP Distributed Digital Signal Processing Number of Onboard Configurations System 200, Compact 72: 4 MicroMatrix: 2 Input/Output Level Adjust Adjustable from PC Individual Crosspoint Level Control Selectable from any control panel Compatibility Compatible with all Matrix Plus II and Matrix Plus 3 stations, interfaces, and accessories Ports per Matrix Card 8 full-duplex audio/data ports Station Key Response Time Virtually instantaneous Individual Station Key Capacity From 5 keys in 1 RU to 84 keys in 5 RU (using expansion key panels) Data Transfer Rate 19.2 Kbps DDSP Format Audio: 32K samples/sec, Data: 16 bit ANALOG AUDIO INPUT/OUTPUT Frequency Response 20 Hz - 15 khz, +/-1 db Total Harmonic Distortion (THD) <0.09%, 20 Hz - 15 khz Signal-to-Noise Ratio (SNR) >80 db below +18 dbu Crosstalk -75 db Input Level Variable; 0dB, nominal Input Level Range 24 db Input Impedance 600 ohms, electronically balanced Output Level Variable Output Adjustment Range -12dB to +18 db Output Impedance 100 ohms, electronically balance FRAME-TO-STATION, DIGITAL MVX-D8 Card Data Rate 160 Kilobits/sec, full duplex Audio Frequency Response 30 Hz khz, +/- 1.5 db (transmission system only) S/N Ratio >70 db CONNECTORS MVX-A8 Card Matrix Frame One RJ-45 per channel for audio and data Control Stations One RJ-45 for audio and data MVX-D8 Card Matrix Frame RJ-45 Control Stations RJ-45 and coax connector FRAME -TO-STATION WIRING MVX-A8 Card Cable Type/Length: 4-twisted-pair CAT-3 >10,000' (3,000 m) MVX-D8 Card Cable Type/Length: Single-twisted-pair cable >10,000' (3,000 m), both ends transformer isolated 75-Ohm coax (RG-59 minimum), >10,000' (3,000 m), common grounded shield isolated SOFTWARE & PROGRAMMING Configuration Software PGM-WIN Software Operating Under Windows 95/98/2000/NT 4.0 PC Requirements Minimum: 486/66 MHz/8 MB RAM Recommended: Pentium/120 MHz/ 16 MB RAM or better Connection to Matrix DB-9F PC interface, RS-232 Diagnostics Real-time event logging and monitoring DIMENSIONS System 200 9RU 15.75" H x 19" W x 13.8" D (396 x 483 x 348 mm) Compact 72 6 RU 10.5" H x 19" W x 13.8" D (264 x 483 x 348 mm) MicroMatrix 2 RU 3.5" H x 19" W x 13.8" D (8.9 x 483 x 348 mm) WEIGHT (fully loaded frame) System lb (26.8 kg) Compact lb (18.2 kg) MicroMatrix 15 lb. (6.8 kg) POWER REQUIREMENTS AC Power System 200: VAC, Hz, 350 VA max Compact 72: VAC, Hz, 200 VA max MicroMatrix: VAC, Hz, 50 VA max Power Supplies System 200: Two primary plus two redundant with audible alarm, standard Compact 72: Primary plus redundant modules with audible alarm, standard MicroMatrix: In-line power supply with 3-pin EIA connector, UL listed INTERFACES IMF-3 Interface Frame Dimensions: 3 RU 5.25" H x 19" W x 13.75" D (132 x 483 x 345 mm) Capacity: 11 interface modules Interface I/O Connectors: Two DB-9M per interface Matrix to IMF-3 Connectors: Two RJ-45 per interface IMF-102 Interface Frame Dimensions: 1 RU 1.75" H x 19" W x 13.75" D (44 x 483 x 345 mm) Capacity: 2 interface modules Interface I/O Connectors: Two DB-9M per interface Matrix to IMF-3 Connectors: Two RJ-45 per interface Interface Types TEL-14 Dual Telephone FOR-22 Dual 4-Wire CCI-22 Dual Party-Line RLY-6 Relay GPI-6 General Purpose Input All specifications are subject to change without notice.

12 Clear-Com Intercom Systems 4065 Hollis Street Emeryville, CA USA Tel: Fax: Lit# Mtx 402