I-7520: RS-232 to RS-485. Input: RS-232 protocol Output:RS-485/RS-422 Speed: Self Tuner 'inside, auto switching baud rate, 300~ BPS
|
|
- Shannon Horn
- 5 years ago
- Views:
Transcription
1 I-7520 RS-232 to RS-485 Converter I-7510 RS-485 Repeater RS-232 RS-485 I-7000 SERIES Common Specifications Isolation voltage: 3000VDC Speed: 1200, 2400, 4800, 9600, 19200, 38400, 57600, Dual watchdog inside require: +10 ~ +30V reverse protection Plug-in screw terminal Operating temperature: 14 F to 158 F Storage temperature: 13 F to 185 F Humidity: 5 ~ 95%, non-condensing I-7520: RS-232 to RS-485 Converter Input: RS-232 protocol Output:RS-485/RS-422 Speed: Self Tuner 'inside, 256 modules max. in one RS-485 network without 2048 modules max. in one RS-485 network with Isolation Voltage: 3000VDC Repeater request: 4,000 feet or over 256 modules consumption: 2.2W max. I-7510: RS-485 Repeater Input: RS-485 protocol (two wire) Output: RS-485 protocol (two wire) Speed: Self Tuner inside, Isolation Voltage: 3000VDC consumption: 2.2W max.
2 I-7520R RS-232 to RS-485 Conve I-7520A RS-232 to RS-485/422 C I-7510A RS-422 Repeater RS-232 RS-485 I-7520R: RS232 to RS-485 Converter Input: RS-232 protocol Output: RS-485 protocol Speed: Self Tuner inside, 256 modules max. in one RS-485 network without 2048 modules max. in one RS-485 network with Isolation voltage: 3000VDC Repeater request: 4,000 feet or over 256 modules consumption: 2.2W max. I-7520A: RS-232 to RS-422/ Converter Input: RS-232 protocol Output: RS-485/RS-422 protocol Speed: Self Tuner inside, 256 modules max. in one RS-485/422 network without 2048 modules max. in one RS-485/422 network with Isolation Voltage: 3000VDC Repeater request: 4,000 feet or over 256 modules consumption: 2.2W max. I-7510A: RS-422 Repeater Input: RS-422 protocol Output: RS-422 protocol Speed: Self Tuner inside, Isolation voltage: 3000VDC consumption: 2.2W
3 I-7011/I-7011D M I-7018 Module I-7014D Module A/IN I-7011: Thermocouple input module I-7011D: I-7011 with display Type: thermocouple, mv, V or ma Channels: 1 Thermocouple type: J=0 C ~ 760 C K=0 C ~ 1000 C T= 100 C ~ +400 C E=0 C ~ 1000 C R=500 C ~ 1750 C S=500 C ~ 1750 C B=500 C ~ 1800 C N= 270 C ~ 1300 C C=0 C ~ 2320 C Voltage range: ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V Current range: ±20mA Sampling rate: 10 samples/sec Bandwidth: 4Hz Zero drift: ±0.033 ppm/ C Span drift: 25ppm/ C 50/60Hz: 150dB 50/60Hz: 100dB Over voltage protection: ±10V Channel: 1 Logic 0: 0 to 1V Logic 1: 3.5V to 30V Input frequency: 50Hz max. Input pulse width: 1ms min. Channels: 2 Open collector to 30V, 30mA load max. dissipation: 300mW Display LED: 4 1/2 digit (I-7011D) consumption: 1.5W for I W for I-7011D I-7018: 8-Channel Thermocouple Input Type: thermocouple, mv, V, or ma Channels: 6 differential + 2 single-ended or 8 differential (jumper select) Thermocouple type: J=0 C ~ 760 C K=0 C ~ 1000 C T= 100 C ~ +400 C E=0 C ~ 1000 C R=500 C ~ 1750 C S=500 C ~ 1750 C B=500 C ~ 1800 C N= 270 C ~ 1300 C C=0 C ~ 2320 C Voltage range: ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V Current range: ±20mA Sampling rate: 10 samples/sec (total) Bandwidth: 13.1Hz Zero drift: ±0.033 ppm/ C 50/60Hz: 150dB 50/60Hz: 100dB Span drift: 25ppm/ C Over voltage protection: ±35V Baud rate: 115.2K BPS Modules: 140 A/I Channels: 140 x 8 = 1120 High speed command = #01 Throughput: 1120 channels/sec consumption: 2W I-7014D: Module with LED Display Channels: 1 Input type: v, mv, ma Input range: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA Sampling rate: 10 samples/sec Bandwidth: 4Hz Zero drift: ±6µV/ C Span drift: ±25ppm/ C Isolated loop power: 30mA 50/60Hz: 150dB 50/60Hz: 100dB Liner input converter Over voltage protection: ±10V Display LED indicator: 4 1/2 digit Digital input Channel: 1 Logic 0: 0 to 1V Logic 1: 3.5V to 30V Input frequency: 50Hz max. Input pulse width: 0.5ms min. Channel: 2 Open Collector to 30V, 30mA max. load dissipation: 300mW Consumption: 2.2W
4 I-7012/I-7012D Mo I-7017 Module I-7013/I-7013D Mo A/IN I-7012: Module I-7012D: I-7012 with display Channels: 1 Type: mv, V, ma Voltage range: ±150mA, ±500mV, ±1V, ±5V, ±10V Current range: ±20mA Sampling rate: 10 samples/sec Bandwidth: 4Hz Zero drift: ±0.033µV/ C Span drift: ±25PPm/ C 50/60Hz: 150dB 50/60Hz: 100dB Over voltage protection: ±10V Same as I-7011 Same as I-7011 Display LED: 4 1/2 digit (I-7012D) consumption 1.2W for I W for I-7012D I-7017: 8 Channel Analog Input Module Channels: 6 differential + 2 single-ended or 8 differential (jumper select) Input type: mv, V, ma Input range: ±150mV, ±500mV, ±1V, ±5V, ±10V and ±20mA Sample rate: 10 sample/sec(total) Bandwidth: 13.1Hz Accuracy: ±0.1% or better Zero drift: ±0.03µV/ C Span drift: ±25ppm/ C 50/60Hz: 92dB min Over voltage protection: ±35V Consumption: 2W I-7013: Module I-7013D: I-7013 with display Channel: 1 Input Type: Pt, Ni RTD temperature range Pt C to +100 C α= Pt100 0 C to +100 C α= Pt100 0 C to +200 C α= Pt100 0 C to +600 C α= Pt C to +100 C α= Pt100 0 C to +100 C α= Pt100 0 C to +200 C α= Pt100 0 C to +600 C α= Ni C to +100 C Ni120 0 C to +100 C Sampling rate: 10 samples/sec Bandwidth: 4Hz Wire connection: 2 3/4 wire Zero drift: ±0.3µV/ C 50/60Hz: 92dB min 50/60Hz: 100dB Span drift: ±25ppm/ C Consumption 2W for I W for I-7013D Baud rate = 115.2K BPS Modules = 213 A/I channels = 213 x 8 = 1704 High speed command: $AAA Throughout = 1704channels/sec
5 I-7021 Analog Output Module I-7050 Digital I/O Module I-7052 Module A/O DI/O I-7021: Analog Output Module I-7050: Digital I/O Module I-7052: Isolated Module Analog output Channels: 1 Output type: ma, V Output range: 0 to 20mA, 4 to 20mA and 0 to 10V Accuracy: ±0.1% of FSR Read back accuracy: ±1% of FSR Resolution: ±0.02% of FSR Zero drift: Voltage output: ±30µV/ C Current output: ±20µA/ C Span temperature coefficient: ±25ppm/ C Programmable output slope: to 128 ma/sec to 64.9 V/sec Current load resistor: 500Ω for internal power 1050Ω for external power (PWR-24, P21) consumption: 2W Channels: 7 Logic level 1: +3.5V ~ +30V Channels: 8 Open collector to 30V, 30mA max. load dissipation: 300mW consumption: 0.4W Channels: 8 6 fully independent channels 2 common ground channels Digital input Level Logic level 1: +3.5V to +30V Characteristics Isolation voltage: 5000Vrms Input impedance: 3KΩ/0.5W consumption: 0.4W
6 I-7060 Digital I/O Module I-7067 Module I-7053 Module DI/O I-7060: Digital I/O Module I-7067: module I-7053: 16-channel Digital Input Module Channels: 4 Four isolated channels with common power Digital input: Logic level 1: +3.5 to 30V Isolation voltage: 3,750Vrms Input impedance: 3KΩ/0.5W Relay output Channels: 4 Two form A relay SPST N.O. Two form C relay SPDT Dry contact Characteristics Contact rating: AC: DC: Breakdown voltage: 500VAC (50/60Hz) Relay on time (typical): 3ms Relay off time (typical): 1ms Total switching time: 10ms Insulation resistance: 1000MΩ min. at 500Vdc consumption: 0.8W Relay Output Channels: 7 Form A relay SPST N.O. Dry Contacts AC DC Surge strength: 1500VAC Relay on time (typical): 5 ms consumption: 0.8W Channels: 16 Digital input level: DRY contact: logic level 0: close to GND logic level 1: open Wet contact: logic level 0: +2V max. logic level 1: +4V to +30V Effective distance for dry contact: 500m max. consumption: 0.8W
7 I-7041 Module I-7042 Module I-7043 Module DI/O I-7041: 14-Channel Isolated Module I-7042: 13-Channel Isolated O.C. Output Module I-7043: Non-isolated Digital Output Module Channels: 4 Four isolated channels with common power Digital input level: Logic level 1: +3.5 to 30V Isolation voltage: 3,750V Input impedance: 3KΩ/0.5W consumption: 0.8W Channels: 13 Open collector to 30V max. Output current: 100mA per channel Isolation voltage: 3,750V Direct drive power relay module consumption: 0.8W Accessory RM-104/108/116: 4/8/16 channels of form-c, Din-Rail Mounting Relay Module, SPST, 400V AC, 16A RM-204/208/216: 4/8/16 channels of form-c, Din-Rail Mounting Relay Module, SPDT, 400V AC, 5A Channels: 16 Open collector to 30V Output current: 100mA per channel, total 3A max. Direct drive power relay module consumption: 0.6W (no load) Accessory RM-104/108/116: 4/8/16 channels of form-c, Din-Rail Mounting Relay Module, SPST, 400V AC, 16A RM-204/208/216: 4/8/16 channels of form-c, Din-Rail Mounting Relay Module, SPDT, 400V AC, 5A
8 I-7044 Isolated Digital I/O M I-7080/I-7080D Counter/Freque I-7188 Embedded Controller Will be Available Will be Available DI/O I-7044: Isolated Digital I/O Module Channels: 4 Isolated channel with common power Digital input level: Logic level 1: +3.5 to 30V Isolation voltage: 3,750V Input impedance: 3KΩ/0.5W Channels: 8 Open collector to 30V Output current: 600mA per channel, total 3A max. consumption: 0.8W I-7080: Counter/Frequency Module I-7080D: I-7080 with display Counter Input Channels: 2 independent 32 bit counters Input frequency: 50KHz max. Input mode: Isolated or nonisolated Isolated input levels: Logic level 1: +3.5 to 30V Isolation voltage: 5,000Vrms Non-Isolated input level: Programmable Threshold voltage Logic level 0: 0 to +5V Logic level 1: 0 to +5V Input pulse width: >10us Maximum count: 32 bit Programmable digital noise filter: 8 us to 262 ms Alarming: high/low alarm comparator on counter 1 Display (for I-7080D) LED Indicator: 5-digit, CH0 or CH1 Frequency Measurement Range: 5Hz to 50Hz Programmable built-in gate time: 1.0/0.1 sec Same as I-7011 consumption 2W for I W for I-7080D I-7188: Embedded Controller w CPU: RAM: 128K Flash ROM: 128K COM1: RS-232/RS-485 COM2: RS-232/RS Channels D/I/O Built-in RTC Built-in 5-digit LED Built-in watchdog supervisory ckt Program download consumption: 2W
RS-485 I/O Modules: ADAM-4000
RS-485 I/O Modules: ADAM-4000 23 ADAM-4000 Series Overview ADAM-4000 Series Remote Data Acquisition and Control Modules Overview 23-2 and Controller Module Selection Guide 23-4 I/O Module Selection Guide
More informationADAM-5000 Series. I/O Module User's Manual
ADAM-5000 Series I/O Module User's Manual 2.4 rd Edition May 2008 Introduction This manual introduces the detail specifications functions and application wiring of each ADAM-5000 I/O modules. To organize
More informationFeatures. :. Introduction. :. Leader 5000 Appearance. Ethernet-Based Block I/O System
Features 10/100Mbps Ethernet full duplex Auto Negotiation Support C++/C Modbus/TCP drivers and OPC server Support configuration via built-in Web browsing, (HTML), Device Finder and I/O configuration utilities
More informationADAM-5000 Series. I/O Module User's Manual. Copyright Notice
ADAM-5000 Series I/O Module User's Manual Copyright Notice This document is copyrighted, 1997, by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd., reserves the right to make improvements
More informationEthernet I/O Modules: ADAM-6000
Ethernet I/O Modules: ADAM-6000 16 ADAM-6000 Series Overview ADAM-6000 Series 16-2 Peer-to-Peer Technology 16-4 Graphic Condition Logic (GCL) Technology 16-6 ADAM-6000 Selection Guide 16-8 I/O Modules
More informationADAM-6200 Series. Feature. Transition and Vision on Remote DAQ Device 19-13
ADAM-6200 Series Feature DI/O LED Indication Flexible user-defined Modbus address 19 20 21 DAQ Boards Signal Conditioning Industrial USB I/O Modules22 Transition and Vision on Remote DAQ Device In 2002,
More informationICP DAS. ICP DAS 2015 M2M WLAN Wireless Solutions
ICP DAS 2015 M2M WLAN Wireless Solutions Industrial Computer Industrial Product Data Computer Acquisition Product System Data Acquisition System PAC WLAN Wireless Solutions Wi-Fi Products WLAN Converter
More informationiothinx 4500 Series (45MR) Modules
iothinx 4500 Series (45MR) Modules Modules for iothinx 4500 Series Feature and Benefits Easy tool-free installation and removal Built-in LED indicators for IO channels Wide operating temperature range:
More informationEthernet I/O Modules: ADAM-6000
Ethernet I/O Modules: ADAM-6000 24 EtherNet/IP I/O Modules EtherNet/IP I/O Module Introduction 24-2 ADAM-6100 Series Selection Guide 24-3 ADAM-6117EI (New) ADAM-6118EI (New) ADAM-6150EI (New) ADAM-6160EI
More informationICP DAS. ICP DAS 2013 M2M ZigBee Wireless Solutions
2013 M2M ZigBee Wireless Solutions Industrial Computer Industrial Product Data Computer Acquisition Product System Data Acquisition System PAC New ZigBee Solutions: ZT-2000 Series Products ZigBee Wireless
More informationEthernet I/O Modules: ADAM-6000
Ethernet I/O Modules: ADAM-6000 5 ADAM-6000 Series Smart Web Ethernet I/O Modules 5-2 ADAM-6000 Series I/O System Architecture & Product Category 5-4 ADAM-6000 Series System Configuration & Application
More informationFeatures and Benefits. Certifications
iologik R1200 Series RS-485 remote I/O Features and Benefits Dual RS-485 remote I/O with built-in repeater Supports the installation of multidrop communications parameters Install communications parameters
More informationWHERE THE FUTURE MEETS THE PRESENT. Datascan. solo Network Based Data Acquisition System
WHERE THE FUTURE MEETS THE PRESENT Datascan solo Network Based Data Acquisition System CONTENTS INTRODUCTION 1 ANALOG INPUT/OUTPUT MODULES &3 DIGITAL INPUT/OUTPUT MODULES PRODUCT FEATURES &5 NETWORK CONTROLLERS,
More informationADAM-5511 User s Manual
ADAM-5511 User s Manual Support Firmware 1.01 or above Contents Chapter 1 Introduction... 1-1 1.1 Standalone Data Acquisition and Control System.... 1-2 1.2 Features... 1-2 1.2.1 Control flexibility with
More informationEthernet I/O Modules: ADAM-6000
Ethernet I/O Modules: ADAM-6000 5 ADAM-6000 Series Smart Web Ethernet I/O Modules 5-2 ADAM-6000 Series I/O System Architecture & Product Category 5-4 ADAM-6000 Series System Configuration & Application
More informationEthernet Remote I/O Modules. OME-ET-7000/ OME-PET-7000 Series. Features
Ethernet Remote I/O Modules OMEET7000/ OMEPET7000 Series U MultiFunction Web Based Ethernet I/O Modules Models Available For Thermocouple, RTD, Analog Voltage and Current Input U BuiltIn Web Server for
More informationiologik E2200 Series Smart Ethernet remote I/O with Click&GO Logic Introduction Remote I/O PC-Free Alarm and Control Intelligence
iologik E2200 Series Smart Ethernet remote I/O with Click&GO Logic Active communication with patented MX-AOPC UA Server and Active OPC server Smart alarm management with email, SNMP traps, TCP, UDP Save
More informationPROFIBUS Products. ICP Electronics Australia Pty Ltd Overview P 5-1
5.1 Overview P 5-1 Selection Guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 5-2 5.2 Converters & Repeaters P 5-3 5.3 Gateways P 5-5 5.4
More informationFeatures and Benefits. Certifications
iologik E2200 Series Smart Ethernet remote I/O with Click&Go Logic Features and Benefits Front-end intelligence with patented Click&Go control logic, up to 24 rules Active communication with MX-AOPC UA
More informationi-7000 SERIES Remote I/O Modules Remote Data Acquisition Introduction Piggy Back
Remote I/O Modules Controller Remote Data Acquisition Introduction The I-7000 series provides cost-effective protection and conditioning for a wide range of valuable industrial control signals and systems.
More informationSignal Conditioning Modules and Terminal Boards
Signal Conditioning Modules and Terminal Boards Terminal Board Selection Guide 17-2 Isolated Signal Conditioning Modules ADAM-3000 Series Isolated Signal Conditioning Modules 17-4 ADAM-3011 ADAM-3013 ADAM-3014
More informationSafety: UL508 EMC: CE IEC , IEC Vibration: IEC (2 g s during operation) Warranty
NA-4020/4021 RS-485 or RS-232 network adaptors ioogik 4000 Modbus RS-485 NA-4020 SYS TxD RxD I/O Field Power CH0 24V 0V SG SG System Power (0 VDC) System Power (24 VDC) Shielding Ground Non-isolation Switching
More informationiologik 4000 Series (M) Modules
iologik 4000 Series (M) s Remote I/O modules Features and Benefits I/O expansion without a backplane Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy configuration with Modular ioadmin
More informationiologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch Introduction Remote I/O
iologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch Active communication with patented MX-AOPC UA Server and Active OPC Server 2 switched Ethernet ports for daisy-chain topologies Easy
More informationTechnical specification
Technical specification EXPERT i/o extension modules Version 01.00.00 23-02-2017 This manual contains technical documentation which allows for easy installation and use of the i/o extension module product
More informationiologik E4200 Modular Active Ethernet I/O adaptor IT and Instrumentation for industry Introduction Specifications LAN Regulatory Approvals Warranty
ioogik E4200 Modular Active Ethernet I/O adaptor Supports up to 16 I/O modules Dual Ethernet ANs and one RS-232 port Front-end intelligence that supports 80 Click&Go rules Unicode Active Messaging with
More informationLGR-5325 Specifications
s Revision 1.0, April, 2010 Copyright 2010, Measurement Computing Corporation s All specifications are subject to change without notice. Typical for 25 C unless otherwise specified. s in italic text are
More informationIsolated, Voltage or Current Input 7B30 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Voltage or Current Input 7B30 FEATURES Interfaces, amplifies and filters unipolar and bipolar millivolt and voltage inputs. Provides a protected precision output of either +1 V to +5 V or 0 V
More informationIsolated Voltage Input 7B31 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated Voltage Input 7B31 FEATURES Interfaces, amplifies, and filters unipolar and bipolar voltage inputs. Module provides a precision output of either +1 V to +5 V or 0 V to +10 V, linear with temperature.
More informationADAM-6000 Series. Ethernet-based Data Acquisition and Control Modules. User Manual
ADAM-6000 Series Ethernet-based Data Acquisition and Control Modules User Manual Copyright The documentation and the software included with this product are copyrighted 2012 by Advantech Co., Ltd. All
More informationDigital Panel Meters Modular signal s conditioner Type USC-DIN
Digital Panel Meters Modular signal s conditioner Type DIN Linearization of V and A inputs up to 6 points Multiinput modular signal s conditioner 0.% RDG basic accuracy TRMS AC current and voltage measurements
More informationD1000M SERIES FOR MODBUS SENSOR TO COMPUTER INTERFACE MODULES
D1000M SERIES FOR MODBUS SENSOR TO COMPUTER INTERFACE MODULES D1000 FEATURES Complete sensor to RS-232/RS-485 interface. 500V rms analog input isolation. 15 bit measurement resolution. Continuous self-calibration;
More informationiologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch Introduction Remote I/O Daisy-Chained Ethernet I/O Connection
iologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch User-definable Modbus/TCP Slave addressing Supports EtherNet/IP* adapter mode Supports RESTful API for IIoT applications 2-port Ethernet
More informationADAM-6000 Series. Ethernet-based Data Acquisition and Control Modules. User Manual
ADAM-6000 Series Ethernet-based Data Acquisition and Control Modules User Manual Copyright The documentation and the software included with this product are copyrighted 2014 by Advantech Co., Ltd. All
More information8 Channel Analog Input Module Datasheet. Address / Baud rate / range configurable by the user
8 Channel Analog Input Module Datasheet User s Manual Overview: DAM module is a new generation data acquisition and control system based on modular embedded systems. Adopting standard DIN35 rail mounting
More informationXT-9100 Technical Bulletin
System 9100 Technical Manual 636.4 Technical Bulletins Section Technical Bulletin Issue Date 0896 XT-9100 Technical Bulletin XT-9100 Extension Module/XP-910x Expansion Modules Page 3 Introduction 3 SX
More informationUSB-1602HS-2AO Specifications
s Revision 1.0, March, 2009 Copyright 2009, Measurement Computing Corporation s All specifications are subject to change without notice. Typical for 25 C unless otherwise specified. All signal names refer
More informationNI2400/NI816/NI4866 DATALOGGER NI2400/NI816/NI /16/24 CHANNEL ETHERNET DATA LOGGER with Embedded Web Server
DATALOGGER NI2400/NI816/NI4866 8/16/24 CHANNEL ETHERNET DATA LOGGER with Embedded Web Server DATASHEET Rev. 08 del 08/10/2018 Redatto da R&D Approvato da MKT GENERAL 1SPECIFICATIONS NI4866 NI816 NI2400
More informationLAUREL. Laureate Digital Panel Meter for Load Cell & Microvolt Input ELECTRONICS, INC. Features. Description
Description LAUREL ELECTRONICS, INC. Features Laureate Digital Panel Meter for Load Cell & Microvolt Input 20, 50, 100, 250 & 500 mv ranges Span adjust from 0 to ±99,999, zero adjust from -99,999 to +99,999
More informationIsolated Voltage Input 3B30 / 3B31 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated Voltage Input 3B30 / 3B31 FEATURES Interfaces, amplifies, & filtersanalog input voltages. Narrow-bandwidth (3Hz) single-channel single conditioning. Module provides simultaneous precision voltage
More informationWide Bandwidth Strain Gage Input 3B18 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Wide Bandwidth Strain Gage Input 3B18 FEATURES Wideband (20 khz) single-channel signal conditioning module. Module Bandwidth is user-selectable between 20 khz and 100Hz, with user-supplied filter caps
More informationIsolated Process Current Input 7B32 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated Process Current Input 7B32 FEATURES Interfaces, amplifies and filters a process-current input. Module provides a precision output of either +1 V to +5 V or 0 V to +10 V, linear with temperature.
More information8B SLX300 Data Acquisition System
8B SLX300 Data Acquisition System Description Dataforth s newest data acquisition system builds on the proven reliability of the SLX200 SCM5B-based system and also takes advantage of the miniature size
More informationProcess displays For current and voltage
Features Voltage input TRMS-AC/DC up to 600 V Current input AC/DC 1 A, 5 A and shunt (precision resistor) 60 or 100 mv With 2 or 4 limits Display range can be linearised Min, Max, Hold functions 4 20 ma
More informationADAM Data Acquisition Modules User's Manual
ADAM 4000 Data Acquisition Modules User's Manual ADAM 4000 Series Data Acquisition Modules User s Manual Copyright Notice This document is copyrighted, 1997, by Advantech Co., Ltd. All rights are reserved.
More informationLGR-5327 Specifications
s Revision 1.0, April, 2010 Copyright 2010, Measurement Computing Corporation All specifications are subject to change without notice. Typical for 25 C unless otherwise specified. s in italic text are
More informationZigBee Products. ICP Electronics Australia Pty Ltd Overview P ZigBee Converters P5-2-1
ZigBee Products.1 Overview P11.2 ZigBee Converters P21.3 ZigBee I/O Modules P31 Overview.1. Overview ZigBee Products ZigBee Host ZB270T(PA)/20T(PA) ZigBee DIO 1 Overview ZigBee Repeater ZB210T Based on
More informationIsolated Wideband Voltage Input 3B40 / 3B41 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated Wideband Voltage Input 3B40 / 3B41 FEATURES Interfaces, amplifies, protects& filters wide-bandwidth (h0 khz) single-channel analog voltage inputs. Module provides simultaneous precision voltage
More informationADAM-6000 Series. Ethernet-based Data Acquisition and Control Modules. User Manual
ADAM-6000 Series Ethernet-based Data Acquisition and Control Modules User Manual Copyright The documentation and the software included with this product are copyrighted 2017 by Advantech Co., Ltd. All
More informationUser s Guide OME-ET-7000 AND OME-PET-7000 SERIES. Ethernet I/O Modules
egister Table User s Guide Shop online at omega.com e-mail info@omega.com For latest product manuals omegamanual.info OME-ET-7000 AND OME-PET-7000 SEIES Ethernet I/O Modules OMEGAnet On-Line Service omega.com
More informationZigBee Products 5.1 Overview P ZigBee Converters P ZigBee I/O Modules P5-3-1
ZigBee Products.1 Overview P11.2 ZigBee Converters P21.3 ZigBee I/O Modules P31 Overview.1. Overview ZigBee Products ZigBee Host ZB270T(PA)/20T(PA) ZigBee DIO 1 Overview ZigBee Repeater ZB210T Based on
More informationOBSOLETE. Isolated, Linearized, Thermocouple Input 3B47 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
FEATURES Interfaces, amplifies, filters, isolates, & linearizes analog input voltages from a J, K, T, E, R, S or B-type thermocouple Thermocouple input signal is internally linearized High accuracy internal
More informationMIC-2 MKII, Multi-instrument DATA SHEET
MIC-2 MKII, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
More informationIndustrial USB I/O Modules
Industrial USB I/O Modules 21 USB Data Acquisition (DAQ) Series Overview 21-2 USB I/O Module Selection Guide 21-4 USB Hubs USB-4620 USB-4622 USB DAQ Modules USB-4702 USB-4704 5-port Full-speed Isolated
More informationUser Manual ADAM-6100EI Series. EtherNet/IP I/O Modules
User Manual ADAM-6100EI Series EtherNet/IP I/O Modules Copyright The documentation and the software included with this product are copyrighted 2009 by Advantech Co., Ltd. All rights are reserved. Advantech
More informationiologik R1200 Series User s Manual
User s Manual First Edition, April 2013 www.moxa.com/product 2013 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used
More informationLAUREL. Laureate Dual-Channel Pulse Input Totalizer With Two Independently Scalable Input Channels & Presets ELECTRONICS, INC. Features.
Description LAUREL ELECTRONICS, INC. Laureate Dual-Channel Pulse Input Totalizer With Two Independently Scalable Input Channels & Presets Features Frequencies up to 1 MHz Totals stored in non-volatile
More informationLAUREL. Laureate Digital Panel Meter for Process and Ratiometric Signals ELECTRONICS, INC. Features. Description
LAUREL ELECTRONICS, INC. Laureate Digital Panel Meter for Process and Ratiometric Signals Features Reads process signals from ±200 mv to ±600V or ±2 ma to ±5A full scale Ratiometric mode for bridges and
More information-10 to 10V to User range setting. 4 to 20mA 0 to to 20mA 500.0nA
Analog I/O Analog Input Modules R60AD4 R60ADV8 Number of Analog Input Points 4 points (4 channels) 8 points (8 channels) Analog Input 10 to 10 VDC (input resistance 1MΩ) Analog Input DC (input resistance
More information1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882
1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882 This manual is intended for use in support of installation, commissioning and configuration of the 1/32-DIN Temperature
More informationIsolated Process Current Input with Loop Power 7B35
Isolated Process Current Input with Loop Power 7B35 FEATURES Single-channel signal conditioning current input module that interfaces with two-wire transmitters. Module provides a precision output of either
More informationET-7000 series Ethernet Remote I/O Module
ET-7000 series Ethernet Remote I/O Module User Manual Warranty All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year, starting from the date of
More informationTransducers for Pt-100/1000, Resistors
Transducers for Pt-100/1000, Resistors Microprocessor-based technology General Description Isolating transducers with digital programming of ranges, for DIN-rails or for printed circuit boards. Modules
More informationRS 485 Mini Modbus 1AO
RS 485 Mini Modbus 1AO Version 1.0 14/08/2014 Manufactured for Thank you for choosing our product. This manual will help you with proper support and proper operation of the device. The information contained
More informationD7000 SERIES MODBUS TCP/IP ETHERNET INTERFACE MODULES
11/17 D7000 SERIES MODBUS TCP/IP ETHERNET INTERFACE MODULES D7000 FEATURES Complete data acquisition systems. Analog and Digital I/O models available. RJ-45 Ethernet 10/100MB interface. Modbus TCP/IP Ethernet
More informationSX90 Process Controller
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSignal Conditioning Modules and Terminal Boards ADAM-3000
Signal Conditioning Modules and Terminal Boards ADAM-3000 8 Terminal Boards Selection Guide 8-2 Signal Conditioning Modules ADAM-3000 Series Isolated Signal Conditioning Modules 8-4 ADAM-3011 Isolated
More informationC160 Wall-/Pipe Mounted Universal Process Indicator
Data sheet DS/ EN Rev. I Wall-/Pipe Mounted Universal Process Indicator reliable process indicator, wherever it s needed High visibility LED display the clearest view of your process status 0.1% measurement
More informationiologic E1200 Series Remote Ethernet I/O with 2-port Ethernet Switch Introduction Industrial I/O
iologic E1200 Series Remote Ethernet I/O with 2-port Ethernet Switch Build-in 2-port Ethernet switch for daisy-chained topology Free push-based Moxa Active OPC Server Lite support Seamlessly connect to
More informationFeatures. RoHS COMPLIANT 2002/95/EC
PCIE-1730 32-ch TTL and 32-ch Isolated Digital I/O PCI Express Card 32-ch isolated DI/O (16-ch digital input, 16-ch digital output) 32-ch TTL DI/O (16-ch digital input,16-ch digital output) High output
More informationBACnet Controller for General-purpose Building Applications
Specifications BACnet Controller for General-purpose Building Applications General Model WJ-1101 is the BACnet controller to be used for a wide range of building applications such as air-conditioning and
More informationR1M-GH THERMOCOUPLE & DC INPUT MODULE MODEL. Remote I/O R1M Series. (16 points)
Remote I/O R1M Series THERMOCOUPLE & DC INPUT MODULE (16 points) MODEL MODEL & SUFFIX CODE SELECTION R1MGH2T MODEL Modbus protocol I/O TYPE GH2 : Thermocouple or DC input, 16 points FIELD TERMINAL TYPE
More informationUSB-1616FS. Analog Input and Digital I/O. Specifications
Analog Input and Digital I/O Specifications Document Revision 1.6 May 2012 Copyright 2012 Specifications All specifications are subject to change without notice. Typical for 25 C unless otherwise specified.
More informationDual Channel Monitor for Measurement of Speed and Ratio with SIL1 requirements Series D224.xx
D224 Dual Channel Monitor for Measurement of Speed and Ratio with SIL1 requirements Series D224.xx D224 Front View KEY FEATURES SIL1 / IEC 61508:2010 compliant Dual Channel Speed and Ratio Monitor with
More informationIntrinsically Safe Barriers
Intrinsically Safe Barriers Description Page No. Safety Barriers 464-472 Din Rail Isolated Barriers 473-488 477 Intrinsically Safe Barriers Product Overview We have simplified intrinsic safety! Cooper
More informationMICRO SERIES PROCESS DISPLAYS LARGE DIGIT MODELS
The MICRO SERIES PROCESS DISPLAYS LARGE DIGIT MODELS Mighty-5 DPM MODELS Micro-P & Mighty-1 Mighty-1 Micro-P ELECTRO-NUMERICS, INC. Introduction The Electro-Numerics family of Digital Panel Meters and
More informationTime Counters mini "h", DC Version
Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable
More informationPID with. Controllers W A T L O W CPC400 SERIES. Multi-Loop
CPC400 SERIES W A T L O W The Watlow Anafaze CPC400 controllers provide performance and flexibility in a compact design and integrate full-featured closed-loop control with user-written logic. Programmable
More informationA variety of ECONseries modules provide economical yet flexible solutions. Waveform Generation
ECONseries BUS: USB Type: Economy, Mini-Instruments ECONseries Economy USB Mini-Instruments Flexible Yet Economical A variety of low-cost ECONseries modules are available to provide flexible yet economical
More informationIsolated, Voltage or Current Input 7B41 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Voltage or Current Input 7B41 FEATURES Interfaces, amplifies and filters unipolar and bipolar voltage inputs. Module provides a precision output of either +1 V to +5 V or 0 V to +10 V. All 7B41
More informationY800 Plus Frequency, Rate & Period Meter With dual, independently field-scalable channels
Y800 Plus Frequency, Rate & Period Meter With dual, independently field-scalable channels Description Features Frequencies from 0.005 Hz to 1 MHz 6-digit resolution at update rates up to 25/s Selectable
More informationEnergy Management Modular Energy meters Type EM2-96
Energy Management Modular Energy meters Type EM2-96 Product Description µp-based modular energy meter with a built-in configuration key-pad. The energies are both partial and total counted. The housing
More information20.4VDC to 28.8VDC with less than 10% ripple. Input impedance 10mSec typical, when used as normal digital inputs
Vision OPLC V130-33-RA22 Technical Specifications This guide provides specifications for Unitronics model V130-33-RA22. General features include: 12 pnp/npn Digital, including 2 Analog, 2 PT100/TC, 1 HSC/Shaft-encoder
More informationPU5 5-digit digital panel meter in 96x48 mm (BxH) Universal measuring inputs: Pt100, current, voltage, shunt, thermocouple, resistance
PU5 5-digit digital panel meter in 96x48 mm (BxH) Universal measuring inputs: Pt100, current, voltage, shunt, thermocouple, resistance red display of -9999 99999 digits installation depth: 120 mm without
More informationiologik R1200 Series User s Manual
User s Manual Edition 3.2, November 2017 www.moxa.com/product 2017 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used
More informationIsolated, Field Configurable Analog Input 6B11 / 6B11HV FEATURES APPLICATIONS PRODUCT OVERVIEW
Isolated, Field Configurable Analog Input 6B11 / 6B11HV FEATURES Single-channel isolated signal-conditioning modules. Accepts outputs from Thermocouple, millivolt, volt and current signals. Complete microcomputer-based
More informationDINALOG A 144 x 36 A1400 Light-Strip Indicator
DINALOG A x 6 A00 Light-Strip Indicator -9-0-0 /.00 Front panel dimensions: x 6 mm Light-strip indicator with 7 high-contrast LEDs Red LED display color Digital display range for portrait format: 999 to
More informationiologik E1200H Series
iologik E1200H Series Ethernet remote I/O for offshore wind power applications Features and Benefits User-definable Modbus TCP Slave addressing 2-port Ethernet switch for daisy-chain topologies Active
More informationDIGITAL INDICATING CONTROLLER
DB1000 SERIES DIGITAL INDICATING CONTROLLER The DB1000 series is a 96 96mm digital indicating controller with the indicating accuracy of ±0.1% and the control cycle of approximately 0.1 seconds. Various
More informationAmplifiers, Counters, Timers & Controls
Amplifiers, Counters, Timers & Controls Panel Meter 814 Counter/Timer/Rate Indicator 815-817 Speed Monitor 818-819 Signal Converter 820-822 Power Supplies/Amplifier 823-824 813 Panel Meter Panel Meter
More informationWP-Line 351 MK ll Combi I/O. control systems. Optimized I/O Combi module. 2 serial COM-ports
Optimized I/O Combi module 2 serial COM-ports 16 digital outputs/26 digital inputs/4 high-speed counter inputs 4 analog outputs/8 analog inputs/8 PT100 inputs/2 thermistor inputs Compact design Improved
More informationTC Type Range Conformity Error. J -210 C to +760 C (-347 F to F) ±0.09 C (±0.16 F) K -244 C to C (-408 F to F) ±0.1 C (±0.
LAUREL ELECTRONICS, INC. Laureate Thermocouple Panel Meter / Controller Features Factory calibrated for thermocouple types J, K, T, E, N, R, S Entire range of each thermocouple in one scale Highly accurate
More informationNetBiter I/O Extender User Manual
User Manual Part no. 0920-9999-009 IntelliCom Innovation AB Pilefeltsgatan 73 SE-302 50 Halmstad SWEDEN Phone +46 35 17 29 90 Fax +46 35 17 29 09 email info@intellicom.se www www.intellicom.se Revision
More informationiologik E1200 Series User s Manual
User s Manual Tenth Edition, April 2013 www.moxa.com/product 2013 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. User s Manual The software described in this manual is furnished
More informationMCX08M2 Programmable controller
Data sheet MCX08M2 Programmable controller MCX08M2 is an electronic controller that holds all the typical functionalities of MCX controllers in the compact size of 8 DIN modules: programmability connection
More informationIndustrial USB I/O Modules
Industrial USB I/O Modules 11 Advantech USB Data Acquisition (DAQ) Series 11-2 USB I/O Module Selection Guide 11-4 USB-based DAQ Modules USB-4622 5-port USB 2.0 Hub 11-6 USB-4711A 150 ks/s, 12-bit, 16-ch
More information8520/8520R. User Manual
/R User Manual Warranty All products manufactured by SuperLogics are warranted against defective materials for a period of one year from the date of delivery to the original purchaser. Disclaimer SuperLogics
More informationPBSCONTROL. AMS-R4000 Modular RTU. Remote Terminal Unit
PBSCONTROL AMS-R4000 Modular RTU Remote Terminal Unit AMS-R4000 Introduction The documentation and the software included with this product are copyrighted 2017 by pbscontrol Company. AMS-4000 System is
More informationLAUREL. Laureate Pulse or Analog Input Batch Controller Automatic batch control for repetitive liquid fill operations ELECTRONICS, INC.
Description LAUREL ELECTRONICS, INC. Laureate Pulse or Analog Input Batch Controller Automatic batch control for repetitive liquid fill operations Features Available for turbine flow meter pulse signals
More informationRelated Products. 1. CAN Bus to Ethernet Gateway 2. Serial Device to Ethernet Gateway. Wireless ZigBee Series. Ethernet Layer.
Related Products 1. CAN Bus to Ethernet Gateway 2. Serial Device to Ethernet Gateway 3. Wireless ZigBee Series SCADA Data Server RS405 RS405 Ring RS405 RS405 Ethernet Layer RS405 Fieldbus Layer CAN Bus
More information