RM35JA32MR Current control relay 0.15A 15A, 2 C/O

Transcription

1 Characteristics Current control relay 0.15A 15A, 2 C/O Main Range of product Product or component type Relay type Relay name Relay monitored parameters Time delay type Switching capacity in VA Measurement range Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current Oct 9, 2018 Zelio Control Modular measurement and control relays Current control relay RM35JA Overcurrent or undercurrent detection Overcurrent or undercurrent in window mode Adjustable s, +/- 10 % of the full scale value on crossing the threshold Tt 2000 VA 150 ma...15 A current AC/DC 50/60 Hz A E1-M terminals A E2-M terminals A E3-M terminals <= 1500 ms at maximum voltage 250 V AC 10 ma at 5 V DC 8 A AC [Us] rated supply voltage V AC/DC, 50/60 Hz (+/- 10 %) Supply voltage limits Operating limits Power consumption in VA Power consumption in W Resistance across terminals Output contacts Nominal output current Internal input resistance V AC/DC - 15 % + 10 % Un 3.5 VA AC 1.5 W DC Ohm at E3-M terminals Ohm at E2-M terminals 0.05 Ohm at E1-M terminals 2 C/O 8 A 0.05 Ohm Ohm Ohm 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

2 Setting accuracy of the switching threshold Switching threshold drift Setting accuracy of time delay Time delay drift Hysteresis Run-up delay at power-up Measuring cycle Repeat accuracy Measurement error Response time +/- 10 % of the full scale <= 0.05 % per degree centigrade depending permissible ambient air temperature <= 1 % within the supply voltage range 10 P <= 0.05 % per degree centigrade depending permissible ambient air temperature <= 1 % within the supply voltage range % adjustable of threshold setting for overcurrent or undercurrent detection 3 % fixed of full scale for window mode 0.3 s Threshold setting % 100 ms measurement cycle as true rms value +/- 0.5 % input and measurement circuit +/- 2 % time delay < 1 % over the whole range with voltage variation 0.05 %/ C with temperature variation <= 500 ms on crossing the threshold Overvoltage category III conforming to UL 508 III conforming to IEC Insulation resistance > 100 MOhm at 500 V DC conforming to IEC Insulation Mounting position Connections - terminals Between supply and measurement Any position Tightening torque N.m conforming to IEC Housing material Status LED Screw terminals 2 x x 2.5 mm² - AWG 20...AWG 14, solid cable without cable end Screw terminals 2 x x 1.5 mm² - AWG 24...AWG 16, flexible cable with cable end Screw terminals 1 x x 3.3 mm² - AWG 20...AWG 12, solid cable without cable end Screw terminals 1 x x 2.5 mm² - AWG 24...AWG 14, flexible cable with cable end Self-extinguishing plastic LED yellow for relay ON LED green for power ON Mounting support 35 mm DIN rail conforming to EN/IEC Electrical durability Mechanical durability cycles cycles Utilisation category AC-1 conforming to IEC DC-1 conforming to IEC AC-15 conforming to IEC DC-13 conforming to IEC Safety reliability data Contacts material Width Product weight MTTFd = years B10d = Cadmium free 35 mm 0.12 kg Environment Immunity to microbreaks 50 ms Electromagnetic compatibility Conducted and radiated emissions class B conforming to CISPR 22 Immunity for residential, commercial and light-industrial environments conforming to EN/IEC Electrostatic discharge 6 kv level 3 contact discharge conforming to IEC Electrostatic discharge 8 kv level 3 air discharge conforming to IEC Radiated radio-frequency electromagnetic field immunity test 10 V/m level 3 conforming to IEC Electrical fast transient/burst immunity test 4 kv level 4 direct conforming to IEC Electrical fast transient/burst immunity test 2 kv level 4 capacitive coupling conforming to IEC Surge immunity test 4 kv level 4 common mode conforming to IEC Surge immunity test 2 kv level 4 differential mode conforming to IEC Conducted and radiated emissions class B group 1 conforming to CISPR 11 Emission standard for residential, commercial and light-industrial environments except radiated emission conforming to EN/IEC Emission standard for industrial environments conforming to EN/IEC Immunity for industrial environments conforming to EN/IEC

3 Standards EN/IEC Product certifications CCC CE CSA GL UL RCM EAC China RoHS Ambient air temperature for storage C Ambient air temperature for operation Environmental characteristic C at 60 Hz C at 50 Hz AC/DC 3K3 level C Relative humidity % at C conforming to IEC Vibration resistance mm (f = Hz) (not in operation) conforming to IEC gn (f = Hz) (not in operation) conforming to IEC mm (f = Hz) (in operation) conforming to IEC gn (f = Hz) (in operation) conforming to IEC Shock resistance 15 gn for 11 ms (not in operation) conforming to IEC gn for 11 ms (in operation) conforming to IEC IP degree of protection IP20 on terminals conforming to IEC IP50 on front panel conforming to IEC IP30 on housing conforming to IEC Pollution degree 3 conforming to IEC conforming to UL 508 Dielectric test voltage 2.5 kv for 1 min AC 50 Hz conforming to IEC Offer Sustainability Sustainable offer status RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions Green Premium product Compliant - since Schneider Electric declaration of conformity Schneider Electric declaration of conformity Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Available Available 3

4 Dimensions Drawings Dimensions 4

5 Mounting and Clearance Mounting and Clearance Rail Mounting 5

6 Connections and Schema Current Measurement Relay Wiring Diagram A1,A2 : Supply voltage E1,E2,E3,M : Currents to be measured 11-14,12 : 1st C/O contact of output relay 21-24,22 : 2nd C/O contact of output relay 6

7 Technical Description Function Diagrams Undercurrent Detection Without memory ("No Memory" mode) With memory ("Memory" mode) Overcurrent Detection Without memory ("No Memory" mode) With memory ("Memory" mode) Legend Ti Starting inhibition time delay Tt Time delay after crossing of threshold Un Supply voltage I Monitored current H Hysteresis I> Overcurrent threshold I< Undercurrent threshold 11-12/11-14, 21-22/21-24 Output relay connections Relay status: black color = energized. NOTE: In "Memory" mode, the relay opens when crossing of the threshold is detected and then stays in that position. The power supply voltage must be switched off to reset the product. 7