Redline AN80i Point-to-Point System Terminal (AN-80i)

Transcription

1 Product Name: Manufacturer: - Model Number: 80iRR Please Note: We no longer stock these products, please see our Point to Point products for an alternative solution. Redline AN-80i System Terminal with Point-to-Point (PTP) Up to 108Mbps uncoded burst rate, with a maximum channel size of 40MHz The Redline AN-80i radio platform delivers high capacity, highthroughput, long-range performance and low latencyfor PTP and PMP wireless communication links for awide range of specialized applications. Redline AN-80i at a glance Optimized for 4G / LTE networks Software configured for either PTP or PMP applications Operates in 3.5 GHz band, 4.9 GHz public safety band and the 5.2 to 5.8 GHz band High throughput 90 Mbps Ethernet PTP, 48 Mbps Ethernet PMP Exceptional long-range capabilities High capacity point-to-multipoint system Lowest end-to-end latency Flexible software controlled channel size and speed selections QoS controls to differentiate and prioritize traffic groups Dynamic time-division duplex (TDD) transmission Easy install with IEEE 802.3af PoE Highest security protection Available in the 4.9 GHz public safety band, the 5.2 GHz to 5.8 GHz band, the GHz band, and the 3.3 GHz to 3.8 GHz band, the Redline AN-80i is configured via software options and speed keys, allowing you to purchase the features and throughput performance you need today and upgrade later without having to replace any hardware. With a simple software download, the Redline AN-80i can be configured as point-to-point or point-to-multipoint, and it can run specialized applications, from video surveillance to data acquisition, from high performance to ultra-high performance. This common radio platform approach simplifies network design and logistics while providing a high level of future-proofing. In the PTP configuration, the Redline AN-80i delivers up to 90 Mbps Ethernet data rate more than double that of the nearest competitor making it an ideal choice for high-capacity backhaul applications. It has excellent range and is deployed in hundreds of links over 80 kilometers. In the PMP configuration, the Redline AN-80i delivers up to 48 Mbps Ethernet data rate the highest in its class and it supports a full range of Quality of Service (QoS) controls to enable business access services for voice, data and video services. Its industry-leading capacity also supports the largest number of video cameras with the highest video quality. With either configuration, the Redline System Terminal assures ultra-low latency as low as one millisecond up to 10 times better than the competition. The Redline AN-80i provides AES-128 and AES-256 encryption options and X.509 certificate-based authentication. As the only broadband wireless solution in its class to achieve FIPS certification, it delivers unparalleled security. Available with a wide variety of antennas, the System Terminal with Point-to-Point is quick and easy to install. The product is manageable over-the-air (OTA) via a standard web browser or through Redline's powerful Clearview NMS management software. The powerful, versatile and reliable Redline AN-80i is ideal for specialized point-to-point and point-to-multipoint wireless applications where high capacity, long range, security and reliability are paramount. op@support.4gon.co.uk Page 1/5

2 Software Options The Redline AN-80i common radio platform is configured by software options and speed keys that let you purchase the features and throughput you need today and upgrade later without having to replace hardware. With a simple software download, Redline radios can be configured as point-to-point or point-to-multipoint. They can also run specialized applications, from video surveillance to voice and data and from high performance to ultra-high performance. Speed Keys Standard: 3 Mbps Optional: Seamless in-field upgrade any time to 9 Mbps, 18 Mbps, 27 Mbps, 36 Mbps, 54 Mbps or 108 Mbps speed options. PtP: 9 Mbps, 18 Mbps, 27 Mbps, 36 Mbps, 54 Mbps or 108 Mbps PtMP: 18 Mbps, 27 Mbps, 36 Mbps sector controller speed options Software Options RapidLINK RapidLINK enables fast, efficient deployment of high-speed, long-range point-to-point links. Simply power up the radios, align them and let RapidLINK do the rest. Use RapidLINK for all point-to-point links. RapidLINK works with any speed key. MetroLINK MetroLINK is ideal for high-speed, premium access services in private networks and business access networks. MetroLINK expands RapidLINK capabilities by adding: Point-to-Multipoint capability VLAN support to enable multi-site Layer 2 networking Advanced Quality of Service (QoS) control to enable differentiated services MetroLINK works with any speed key and is the base level of software required to access the other software options. SmartLINK SmartLINK allows machine-to-machine communication where serial port polling and time-sensitive TDM protocols are used. SmartLINK can be added to any MetroLINK configuration to: Provide Serial Port Polling to ensure existing sensors, SCADA and AMI devices run seamlessly Eliminate timeouts over wireless and the costly and time-consuming configuration changes Deliver low latency in point-to-multipoint applications up to 10 times lower latency than the competition avoiding delays of critical information Provide advanced error correction for the highest data integrity op@support.4gon.co.uk Page 2/5

3 VideoLINK VideoLINK is designed for high-capacity, high-quality video surveillance solutions. VideoLINK can be added to any MetroLINK configuration to: Support variable uplink-downlink ratios to maximize the number of high-resolution cameras Provide multicast support and multicast groups to enable multiple security control centers Provide data shower caching and camera vendor-specific proprietary enhancements to eliminate lost images VideoLINK is recommended by top video camera manufacturers for high-resolution cameras. SecureLINK SecureLINK delivers FIPS certification with AES-256 encryption, X.509 wireless node and link level authentication, and supports Dynamic Key Exchange, SSH, HTTPS and SNMP V3 protocols. SecureLINK can be added to any RapidLINK or MetroLINK configuration. No other broadband radio offers this level of security and encryption, and no other broadband radio is certified FIPS Technical Specifications System Capability: LOS, optical-los, and non-los ( OFDM) RF Band: GHz TDD band GHz FCC / IC GHz TDD band GHz TDD UNII band GHz TDD band GHz TDD band1 Channel Size: PtP: 3.5, 5, 7, 10, 14, 20, 28, 40 MHz1 (software selectable) PtMP: 3.5, 5, 7, 10, 14, 20 MHz1 (software selectable) Data Rate: PtP:Up to 108 Mbps UBR, Up to 90 Mbps Ethernet Rate PtMP: Up to 54 Mbps UBR, Up to 48 Mbps Ethernet Rate Processing Speed: 176,000 PPS Max Range: 80 km (50 mi) Network Attributes: PtP: Transparent bridge, automatic link distance ranging, 802.3x, 802.1p, DHCP pass-through op@support.4gon.co.uk Page 3/5

4 PtMP: Transparent bridge, automatic link distance ranging, DHCP pass-through, 802.1Q VLAN, CIR,PIR support Modulation: BPSK to 64 QAM MAC: TDMA, Dynamic ARQ (per-link), Dynamic adaptive modulation (per-link), Dynamic TDD (per link) Over the Air Encryption: Proprietary private key encryption, AES-128 and AES-256 QoS: Multiple service flows per subscriber Dynamic Channel Control: DFS, ATPC Max Tx Power: +25 dbm (region specific) Rx Sensitivity: Mbps max. PoE Cable: Up to 91 m (300 ft) Network Connection: 10/100 Ethernet (RJ-45) Management: HTTP (Web) interface, SNMP v2 / v3, Telnet, HTTPS (SSL), SSH, ClearView NMS Operating Temp: -40 C to 60 C (-40 F to 140 F) Power Consumption: Standard IEEE 802.3af (15.4 W max.) Humidity: 100% humidity, condensing Power Supply: 110/220/240 VAC 50/60 Hz, VDC Compliance: Safety: IEC, EN, and UL/CSA EMC: EN , EN GHz: IC RSS-210, FCC part 15, ETSI EN GHz: IC RSS-210, FCC part 15, ETSI EN GHz: IC RSS-111, FCC part 15, FCC Part 90, ETSI EN GHz: IC RSS-192, FCC Part 15, FCC part 90, ETSI EN Dimensions: 289 mm x 190 mm x 51.5 mm (11.38 in x 7.50 in x 2.03 in) Weight: 2.0 Kg (4.5 lbs) without bracket or antenna 1 Availability restricted by regional regulations Please Enquire Options available for : AN-80i Indoor Power Supply Required Require Power Supply, Not Required. AN-80i Antenna Required Narrow Beam/Subscriber Flat Panel Antenna 2 foot, 28 dbi, 4.5 degree, Narrow Beam/Subscriber Parabolic Antenna 3 foot, 32 dbi, 4 degree, Narrow Beam/Subscriber Flat Panel Antenna 1 foot, 22 dbi, 9 degree, Narrow Beam/Subscriber Parabolic Antenna 2 foot, 29 dbi, 6 degree. AN-80i Mounting Kit Option Required Light-weight Mounting Kit, Stand-alone Mounting Kit, Heavy-duty Mounting Kit. AN-80i Lightning Protection Required Lightning Protection Required, Not Required. op@support.4gon.co.uk Page 4/5

5 Actual Throughput Options Up to 54Mbps, max channel size of 20MHz (80iRR-P-H-Tyy), Up to 18Mbps, max channel size of 10MHz (80iRR-P-B-Tyy), Up to 36Mbps, max channel size of 20MHz (80iRR-P-L-Tyy), Up to 108Mbps, max channel size of 40MHz (80iRR-P-T-Tyy), Up to 9Mbps, max channel size of 10MHz (80iRR-P-E-Tyy), Up to 27Mbps, max channel size of 10MHz (80iRR-P-F-Tyy). Page 5/5