SUN KTL-USH0 Quick Guide. Issue: 01 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

Size: px
Start display at page:

Download "SUN KTL-USH0 Quick Guide. Issue: 01 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD."

Transcription

1 SUN KTL-USH0 Quick Guide Issue: 01 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

2 NOTICE The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied Only qualified and trained electricians are allowed to operate the device. They should understand the composition and working principles of the grid-tied PV power system and local regulations. Before installing the device, carefully read the user manual to get familiar with product information and safety precautions. Huawei shall not be liable for any consequences caused by the violation of the storage, transportation, installation, and operation regulations specified in this document and the user manual. Use insulated tools when installing the device. For personal safety, wear proper personal protective equipment. 1 Overview (1) Maintenance compartment door (2) LED Indicators (3) Host panel cover (4) Mounting bracket (5) Heat sink (7) USB port (USB) (8) Auxiliary handle (9) DC input terminals (+/ ; controlled by DC SWITCH 1) (11) 2-1/2-inch waterproof AC output cable gland (AC OUTPUT) (6) 3/4-inch communication cable glands (COM1/COM2/COM3) (10) DC input terminals (+/ ; controlled by DC SWITCH 2) (12) 3/4-inch reserved cable gland (RESERVE) (13) PV side ground point (GND) (14) DC switch 1 (DC SWITCH 1) (15) DC switch 2 (DC SWITCH 2) 1 Copyright Huawei Technologies Co., Ltd All rights reserved.

3 2 Installation Requirements Angle Space Recommended: 600 mm (23.62 in.) Bottom space 730 mm (28.74 in.) Dimensions 3 Installing the SUN2000 NOTE The M12x40 bolt assemblies are delivered with the SUN2000. If the bolt assembly length does not meet the installation requirements, prepare M12 bolt assemblies by yourself and use them together with the delivered M12 nuts. Before installing the mounting bracket, remove the security torx wrench and save it for later use. The following describes how to install the SUN2000 by using support-mounted installation as an example. For details about wall-mounted installation, see the user manual. Position for bundling a security torx wrench 2

4 1. Install the mounting bracket. You are advised to apply anti-rust paint on the hole positions for protection. 2. Install the SUN2000 on the mounting bracket. 3. Tighten security torx screws. 4 Electrical Connection NOTICE Connect cables in accordance with the installation laws and regulations of the country or region where the project is located. 4.1 Selecting a Connection Method Cables can be connected to the maintenance compartment through a cable gland and through a tube. Select a connection method based on site requirements. The following describes how to route cables through a cable gland and through a tube, using the AC OUTPUT cable gland as an example. The process for connecting cables through other cable glands is similar. Following are the reference torque values for the cable gland and tube. Observe the requirements of the specific manufacturer, if any. AC OUTPUT: 15 N m (plastic) COM port and RESERVE port: 7.5 N m (plastic) NOTE Rubber liner operations are required only for the AC OUTPUT cable gland instead of the other cable glands. 3

5 Connection Through a Cable Gland If you choose the cable gland connection, prepare appropriate cables by yourself. 1. Remove the locking cap, plug, and rubber liner from the cable gland. 2. Select an appropriate rubber liner based on the cable outer diameter. 3. Install the cable. 4. Tighten the locking cap. 5. Check that the cable is connected correctly and securely. Then seal the cable glands and cable holes. 6. Clear foreign matter from the maintenance compartment. Connection Through a Tube If you choose the tube connection, prepare appropriate cables and tube conduits by yourself. NOTE The tube conduit specifications should comply with the cable gland specifications. For example, for a 2-1/2-inch cable gland, prepare a 2-1/2-inch tube conduit. The tube conduit appearance shown in the following figure is for reference only. Tube Diameters of bottom cable holes Nut Fitting Conduit 1. Remove the locking cap, plug, and rubber liner from the cable gland, and then remove the cable gland. 2. Secure the tube conduit fitting to the enclosure using the nuts delivered with the tube conduit. 3. Install the cable. 4. Connect the conduit and fittings of the tube. 5. Check that the cable is connected correctly and securely. Then take proper measures to ensure that the tube conduit and fittings are secured, and seal the cable holes. 6. Clear foreign matter from the maintenance compartment. 4

6 4.2 Preparing Cables No. Cable Type Conductor Cross-Sectional Area Range Outer Diameter 1 PE cable PV side ground cable AC output power cable DC input power cable RS485 communications cable (connected to the terminal block; recommended) RS485 communications cable (network port connection) Outdoor copper-core cable and M8 OT terminal Outdoor copper-core cable and M6 OT terminal Use cables that can withstand 90 C (194 F) or 105 C (221 F). Connection through a cable gland: If you connect a ground cable to the ground point on the enclosure, you are advised to use a three-core (L1, L2, and L3) outdoor copper cable. If you connect a ground cable to the ground point in the maintenance compartment, you do not need to prepare a PE cable but are advised to use a four-core (L1, L2, L3, and PE) outdoor copper 3 AWG cable and M8 OT terminals (PE). Connection through a tube: If you connect a ground cable to the ground point on the enclosure, you are advised to use three single-core outdoor copper cables (L1, L2, and L3). If you connect a ground cable to the ground point in the maintenance compartment, you do not need to prepare PE cables but are advised to use four single-core outdoor copper cables (L1, L2, L3, and PE) and M8 OT terminals (PE). PV cable that meets the 1500 V standard A multi-paired, individually foil shielded cable that complies with UL2919, CM/CMG (NEC type), or CMH (CSA type), and M6 OT terminals CAT 5E outdoor shielded network cable with internal resistance 1.5 ohms/10 m (1.5 ohms/ inches), as well as a shielded RJ45 connector 6 AWG N/A 6 AWG N/A 8 AWG 14 AWG N/A Cable gland connection: mm ( inches) Tube connection: mm ( inch) mm ( inch) mm ( inch) 7 9 mm ( inch) 5

7 4.3 Installing the Ground Cable Proper grounding is helpful for resisting the impact of surge voltage and improving the electromagnetic interference (EMI) performance. Before connecting the AC power cable, DC power cable, and communications cable, connect ground cables to the PE point and PV side ground point. NOTE It is recommended that the ground cable be connected to a nearby ground point. Connect the ground points of all SUN2000s in the same PV array to ensure equipotential connections to ground cables. To enhance the corrosion resistance of a ground terminal, you are advised to apply silica gel or paint on it after connecting the ground cable. 1. Connect the ground cable to the PE point (on the enclosure). 2. Connect the ground cable to the PV side ground point. Reserved PE point 4.4 Opening the Maintenance Compartment Door CAUTION Never open the host panel of the SUN2000. Before opening the SUN2000 maintenance compartment door, turn off the downstream AC output switch and the two DC switches at the bottom. Do not open the maintenance compartment door in rainy or snowy days. If unavoidable, take protective measures to prevent rain or snow from entering the maintenance compartment. Do not leave unused screws in the maintenance compartment. 6

8 1. Loosen the screws on the maintenance compartment door. 2. Open the maintenance compartment door and install the support bar. 3. Remove the cover and hang it on the hook of the enclosure door. 4.5 Installing the AC Output Power Cable NOTICE To avoid damaging the rubber liner, do not route a cable with a crimped OT terminal directly through it. Do not adjust the cable when the locking cap is tightened. Otherwise, the rubber liner will shift, which affects the IP rating of the device. Ensure that AC terminations provide firm and solid electrical connections. Otherwise, the device may fail to operate or experience any fault that will damage the terminal block. If the AC output power cables are subject to a pulling force because the inverter is not installed stably, ensure that the last cable that bears the stress is the PE cable. Ensure that the AC output power cable and cable connector are in good contact. Cable connector AC output power cable 7

9 4.6 Installing the DC Input Power Cable Requirements for selecting DC input terminals 1. Evenly distribute DC input power cables on the DC input terminals controlled by the two DC switches. 2. Maximize the number of connected MPPT circuits. CAUTION Ensure that the PV module output is well-insulated to ground. Before inserting the positive and negative connectors respectively into the positive and negative DC input terminals of the SUN2000, ensure that the DC voltage does not exceed 1500 V DC using a multimeter set to the DC position and check that the cable polarities are correct. Otherwise, the SUN2000 will be damaged. 8

10 CAUTION Ensure that the PV module output is well-insulated to ground. Before inserting the positive and negative connectors respectively into the positive and negative DC input terminals of the SUN2000, ensure that the DC voltage does not exceed 1500 V DC using a multimeter set to the DC position and check that the cable polarities are correct. Otherwise, the SUN2000 will be damaged. NOTICE 1. Use the Staubli MC4 positive and negative metal terminals and DC connectors supplied with the SUN2000. Using incompatible positive and negative metal terminals and DC connectors may result in serious consequences. The caused device damage is not covered under any warranty or service agreement. 2. Before connecting DC input power cables, label the cable polarities to ensure correct cable connections. Otherwise, the SUN2000 may be damaged. 3. Use a multimeter set to the DC position to measure the voltage at the DC input end. If the voltage is a negative value, the DC input polarity is incorrect. Correct the polarity. If the voltage is greater than 1500 V, too many PV modules are configured in the same string. Remove some PV modules. 4. If the DC input power cable is reversely connected and the DC switch is ON, do not immediately turn off the DC switch or reconnect the positive and negative connectors. Otherwise, the device may be damaged. The caused device damage is beyond the warranty scope. Wait until the solar irradiance declines and the PV string current reduces to below 0.5 A. Then turn the two DC switches to the OFF position, remove the positive and negative connectors, and rectify the connection of the DC input power cable. Positive metal terminal Positive connector Negative metal terminal PV-CZM Ensure that the cable cannot be pulled out after crimped. Negative connector Click Click DC voltage measurement range 1500 V DC Ensure that the locking nut is secured. PV-MS openend wrench 9

11 4.7 Selecting a Communication Mode The SUN2000 supports PLC and RS485 communication modes, but you can choose only one of them. NOTE If PLC is selected, no RS485 communications cable is required to connect to the SUN2000, but the AC power cable needs to connect to a SmartLogger2000 that supports PLC. For detailed operations, see SmartLogger2000 User Manual. When RS485 is selected, do not connect the AC power cable to the SmartLogger Installing the RS485 Communications Cable NOTICE 1. When routing communications cables, separate communications cables from power cables and connect the shield layer to the ground point to prevent communication from being affected by signal interference. 2. The RS485 communications cable can connect to a terminal block or an RJ45 network port. Select one in actual installation. 3. After the RS485 communications cable is installed, seal the cable gland. Connecting to a Terminal Block (Recommended) No. Definition Description No. Definition Description 1 RS485A IN RS485A, RS485 differential signal+ 3 RS485B IN RS485B, RS485 differential signal 2 RS485A OUT RS485A, RS485 differential signal+ 4 RS485B OUT RS485B, RS485 differential signal 10

12 Connecting to an RJ45 Network Port No. Definition No. Definition 1, 4 RS485A, RS485 differential signal+ 2, 5 RS485B, RS485 differential signal 5 Closing the Maintenance Compartment Door 1. Install the cover and install the support bar. 2. Close the maintenance compartment door. NOTE If the screws on the door are lost, use the spare screws in the fitting bag at the bottom of the enclosure. 11

13 6 Verifying the Installation No. 7 Powering On the System Before turning on the AC switch between the SUN2000 and the power grid, use a multimeter set to the AC position to check that the AC voltage is within the specified range. 1. Turn on the AC switch between the SUN2000 and the power grid. 2. Turn the DC switches at the bottom of the SUN2000 to the ON position. 3. Observe the LED indicators to check the SUN2000 operating status. Indicator Status Meaning PV connection At least one PV string is properly indicator connected, and the DC input voltage The indicator is steady green. of the corresponding MPPT circuit is at least 600 V. The SUN2000 disconnects from all PV The indicator is off. strings, or the DC input voltages of all MPPT circuits are less than 600 V. Grid-tied indicator Acceptance Criteria 1 The SUN2000 is installed correctly and securely. 2 The DC switches and downstream AC switch are OFF. 3 All cables are connected correctly and securely. 4 Used cable glands are sealed and locking caps are tightened. 5 Unused terminals and ports are locked by watertight caps. 6 The installation space is proper, and the installation environment is clean and tidy, without foreign matter. 7 The AC terminal cover is reinstalled. 8 The maintenance compartment door is closed and the door screws are tightened. NOTICE Communication indicator Alarm/Maintena nce indicator The indicator is steady green. The indicator is off. The indicator is blinking green. The indicator is off. Alarm status Local maintenance status The indicator is blinking red at long intervals (on for 1s and then off for 4s). The indicator is blinking red at short intervals (on for 0.5s and then off for 0.5s). The indicator is steady red. The indicator is blinking green at long intervals (on for 1s and then off for 1s). The indicator is blinking green at short intervals (on for 0.125s and then off for 0.125s). The indicator is steady green. 12 The SUN2000 is connected to the power grid. The SUN2000 is not connected to the power grid. The SUN2000 receives data over RS485 communication or PLC. The SUN2000 has not received data over RS485 communication or PLC for 10 seconds. A warning alarm is generated. A minor alarm is generated. A major alarm is generated. Local maintenance is in progress. Local maintenance fails. Local maintenance succeeds.

14 8 SUN2000 APP NOTE 1. The SUN2000 app enables the SUN2000 to communicate with the monitoring system through a USB data cable or Bluetooth for you to query alarms, configure parameters, and perform routine maintenance. The SUN2000 app is a convenient platform for local monitoring and maintenance. The app name is SUN Mobile phone operating system: Android 4.0 or later, ios 7.0 or later. 3. Access the Huawei App Store ( Google Play ( or App Store (ios), search for SUN2000, and download the SUN2000 app software package. 4. Connect a USB data cable or a Bluetooth module to the USB port of the SUN2000 to implement the communication between the SUN2000 and the app. Bluetooth connection USB data cable connection ios and Android Android Login screen Select a connection method Connect Bluetooth Select a user Quick settings Main menu screen NOTICE The screenshots in this document correspond to app (Android). The preset password for Common User, Advanced User, and Special User is 00000a. Upon the first login, it is recommended that you change the initial password immediately to ensure account security. Set the correct grid code based on the application region and scenario of the SUN

15 9 Grid Codes No. Grid Code Description No. Grid Code Description 1 IEEE 1547-MV800 US mediumvoltage power grid (IEEE 1547) 2 IEEE 1547a-MV800 US medium-voltage power grid (IEEE 1547a) 3 ELECTRIC RULE NO.21-MV800 US California medium-voltage power grid 4 HECO-MV800 US Hawaii mediumvoltage power grid 5 PRC_024_Eastern- MV800 Eastern US medium-voltage power grid 6 PRC_024_Western -MV800 Western US medium-voltage power grid 7 PRC_024_Quebec- MV800 Canada Quebec medium-voltage power grid 8 PRC_024_ERCOT- MV800 US Texas mediumvoltage power grid NOTE Grid codes are subject to change. The listed codes are for your reference only. 14

16 Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian, Longgang Shenzhen People's Republic of China

SUN KTL-M0 Quick Guide (Europe Edition) Issue: 01 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SUN KTL-M0 Quick Guide (Europe Edition) Issue: 01 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD. SUN2000-60KTL-M0 Quick Guide (Europe Edition) Issue: 01 Part Number: 91509499 Date: 2018-02-10 HUAWEI TECHNOLOGIES CO., LTD. NOTICE The information in this document is subject to change without notice.

More information

SUN2000-(55KTL, 60KTL) Series Quick Guide. Issue: 03 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-(55KTL, 60KTL) Series Quick Guide. Issue: 03 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD. SUN2000-(55KTL, 60KTL) Series Quick Guide Issue: 03 Part Number: 31508435 Date: 2017-12-12 HUAWEI TECHNOLOGIES CO., LTD. NOTICE 1. The information in this document is subject to change without notice.

More information

SUN2000-(33KTL, 36KTL, 40KTL)-US Quick Guide (Mounting Bracket Supplied with the SUN2000, Amphenol Helios H4)

SUN2000-(33KTL, 36KTL, 40KTL)-US Quick Guide (Mounting Bracket Supplied with the SUN2000, Amphenol Helios H4) SUN2000-(33KTL, 36KTL, 40KTL)-US Quick Guide (Mounting Bracket Supplied with the SUN2000, Amphenol Helios H4) Issue: 03 Part Number: 31508086 Date: 2017-11-06 HUAWEI TECHNOLOGIES CO., LTD. NOTICE 1. The

More information

SUN KTL-US-HV-D0 Quick Guide. Issue: 01 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SUN KTL-US-HV-D0 Quick Guide. Issue: 01 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD. SUN2000-45KTL-US-HV-D0 Quick Guide Issue: 01 Part Number: 31507792 Date: 2017-03-10 HUAWEI TECHNOLOGIES CO., LTD. 1 NOTICE 1. The information in this document is subject to change without notice. Every

More information

SUN2000-(2KTL-5KTL)-L0. Quick Guide. Issue: 01 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-(2KTL-5KTL)-L0. Quick Guide. Issue: 01 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD. SUN2000-(2KTL-5KTL)-L0 Quick Guide Issue: 01 Part Number: 31509986 Date: 2018-09-05 HUAWEI TECHNOLOGIES CO., LTD. 0 NOTICE 1. The information in this document is subject to change without notice. Every

More information

SUN2000-(33KTL, 40KTL) Quick Installation Guide. Issue: 05 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-(33KTL, 40KTL) Quick Installation Guide. Issue: 05 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD. SUN2000-(33KTL, 40KTL) Quick Installation Guide Issue: 05 Part Number: 31507079 Date: 2015-11-21 HUAWEI TECHNOLOGIES CO., LTD. NOTICE 1. The information in this document is subject to change without notice.

More information

SUN2000-(33KTL-A, 36KTL, 42KTL) Quick Guide. Issue: 03 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-(33KTL-A, 36KTL, 42KTL) Quick Guide. Issue: 03 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD. SUN2000-(33KTL-A, 36KTL, 42KTL) Quick Guide Issue: 03 Part Number: 31507637 Date: 2017-03-30 HUAWEI TECHNOLOGIES CO., LTD. NOTICE 1. The information in this document is subject to change without notice.

More information

SUN2000 (8KTL-28KTL) Quick Installation Guide. Issue: 13 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SUN2000 (8KTL-28KTL) Quick Installation Guide. Issue: 13 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD. SUN2000 (8KTL-28KTL) Quick Installation Guide 0 Issue: 13 Part Number: 31044 Date: 201-08-03 HUAWEI TECHNOLOGIES CO., LTD. NOTICE 1. Before you install the devices, closely read the SUN2000 (8KTL-28KTL)

More information

SUN KTL-US-HV-D0. User Manual. Issue 01. Date HUAWEI TECHNOLOGIES CO., LTD.

SUN KTL-US-HV-D0. User Manual. Issue 01. Date HUAWEI TECHNOLOGIES CO., LTD. Issue 01 Date 2017-03-10 HUAWEI TECHNOLOGIES CO., LTD. 2017. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of

More information

SUN2000 (8KTL-28KTL) Quick Installation Guide. Issue: 14 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SUN2000 (8KTL-28KTL) Quick Installation Guide. Issue: 14 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD. SUN2000 (8KTL-28KTL) Quick Installation Guide 0 Issue: 14 Part Number: 31044 Date: 2017-03-20 HUAWEI TECHNOLOGIES CO., LTD. NOTICE 1. Before you install the devices, closely read the SUN2000 (8KTL-28KTL)

More information

SUN2000-(55KTL, 60KTL) Series. User Manual. Issue 05. Date HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-(55KTL, 60KTL) Series. User Manual. Issue 05. Date HUAWEI TECHNOLOGIES CO., LTD. Issue 05 Date 2018-03-15 HUAWEI TECHNOLOGIES CO., LTD. 2018. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of

More information

SUN2000-(33KTL, 36KTL, 40KTL)-US. User Manual. Issue 04. Date HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-(33KTL, 36KTL, 40KTL)-US. User Manual. Issue 04. Date HUAWEI TECHNOLOGIES CO., LTD. Issue 04 Date 2017-11-06 HUAWEI TECHNOLOGIES CO., LTD. 2017. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of

More information

SmartLogger2000 Quick Guide. Issue: 01 Part number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SmartLogger2000 Quick Guide. Issue: 01 Part number: Date: HUAWEI TECHNOLOGIES CO., LTD. SmartLogger2000 Quick Guide Issue: 01 Part number: 31507740 Date: 2016-08-25 HUAWEI TECHNOLOGIES CO., LTD. 1. The information in this document is subject to change without notice. Every effort has been

More information

SmartLogger1000 Quick Guide. Issue: 10 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SmartLogger1000 Quick Guide. Issue: 10 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD. SmartLogger1000 Quick Guide Issue: 10 Part Number: 31505707 Date: 2017-06-13 HUAWEI TECHNOLOGIES CO., LTD. 1. The information in this document is subject to change without notice. Every effort has been

More information

SUN2000-(33KTL, 36KTL, 40KTL)-US. User Manual. Issue 01. Date HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-(33KTL, 36KTL, 40KTL)-US. User Manual. Issue 01. Date HUAWEI TECHNOLOGIES CO., LTD. Issue 01 Date 2017-04-01 HUAWEI TECHNOLOGIES CO., LTD. 2017. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of

More information

SUN2000-(33KTL-A, 36KTL, 42KTL) User Manual. Issue 03. Date HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-(33KTL-A, 36KTL, 42KTL) User Manual. Issue 03. Date HUAWEI TECHNOLOGIES CO., LTD. Issue 03 Date 2017-03-30 HUAWEI TECHNOLOGIES CO., LTD. 2017. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of

More information

SmartACU2000B Smart Array Controller Quick Guide (with PID Modules, 800 V AC)

SmartACU2000B Smart Array Controller Quick Guide (with PID Modules, 800 V AC) SmartACU2000B Smart Array Controller Quick Guide (with PID Modules, 800 V AC) Issue: 01 Part Number: 31508370 Date: 2017-02-05 HUAWEI TECHNOLOGIES CO., LTD. NOTICE 1. The information in this document is

More information

SmartACU2000B Smart Array Controller Quick Guide (with no PID Module, 800 V AC) Issue: 05 Part Number: Date:

SmartACU2000B Smart Array Controller Quick Guide (with no PID Module, 800 V AC) Issue: 05 Part Number: Date: SmartACU2000B Smart Array Controller Quick Guide (with no PID Module, 800 V AC) Issue: 05 Part Number: 31509274 Date: 2017-10-30 HUAWEI TECHNOLOGIES CO., LTD. 1. The information in this document is subject

More information

SUN2000P-375 W Smart PV Optimizer. User Manual. Issue 01. Date HUAWEI TECHNOLOGIES CO., LTD.

SUN2000P-375 W Smart PV Optimizer. User Manual. Issue 01. Date HUAWEI TECHNOLOGIES CO., LTD. Issue 01 Date 2017-08-01 HUAWEI TECHNOLOGIES CO., LTD. 2017. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of

More information

SUN2000-(25KTL, 30KTL)-US. User Manual. Date HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-(25KTL, 30KTL)-US. User Manual. Date HUAWEI TECHNOLOGIES CO., LTD. Issue Draft A Date 2015-08-28 HUAWEI TECHNOLOGIES CO., LTD. 2015. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent

More information

SmartPSB2000L Smart PV Safety Box Quick Guide. Issue: 03 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD.

SmartPSB2000L Smart PV Safety Box Quick Guide. Issue: 03 Part Number: Date: HUAWEI TECHNOLOGIES CO., LTD. SmartPSB2000L Smart PV Safety Box Quick Guide Issue: 03 Part Number: 31509508 Date: 2018-05-18 HUAWEI TECHNOLOGIES CO., LTD. NOTICE The information in this document is subject to change due to version

More information

SUN2000-(2KTL-5KTL)-L0. User Manual. Issue 01. Date HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-(2KTL-5KTL)-L0. User Manual. Issue 01. Date HUAWEI TECHNOLOGIES CO., LTD. Issue 01 Date 2018-08-30 HUAWEI TECHNOLOGIES CO., LTD. Copyright Huawei Technologies Co., Ltd. 2018. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any

More information

Huawei Solar Product Training HUAWEI TECHNOLOGIES CO., LTD.

Huawei Solar Product Training HUAWEI TECHNOLOGIES CO., LTD. Huawei Solar Product Training HUAWEI TECHNOLOGIES CO., LTD. Contents Overview of the Product Range Huawei Solar Inverter Technical Information Huawei Smartlogger Technical Information NetECO Portal Brief

More information

SUN2000 (8KTL-28KTL) User Manual. Issue 09. Date HUAWEI TECHNOLOGIES CO., LTD.

SUN2000 (8KTL-28KTL) User Manual. Issue 09. Date HUAWEI TECHNOLOGIES CO., LTD. Issue 09 Date 2017-02-21 HUAWEI TECHNOLOGIES CO., LTD. 2017. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of

More information

DRH Hardware Maintenance Guide

DRH Hardware Maintenance Guide Issue 1.0 Date 2013-04-10 HUAWEI TECHNOLOGIES CO., LTD. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of

More information

USP-070-B08 USP-104-B10, USP-104-M10 USP-156-B10

USP-070-B08 USP-104-B10, USP-104-M10 USP-156-B10 UniStream HMI Panel Installation Guide USP-070-B10, USP-070-B08 USP-104-B10, USP-104-M10 USP-156-B10 Unitronics UniStream platform comprises control devices that provide robust, flexible solutions for

More information

PV Module Installation Instructions

PV Module Installation Instructions Name 1601A Page 1 / 8 Name 1601A Page 2 / 8 1 Introduction Thanks for purchasing PV modules of HT SOLAR ENERGY JOINT STOCK COMPANY This manual refers to PV modules manufactured and sold by HT Turkey. This

More information

SAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS OUTDOOR HARDWIRE INSTALLATION INSTRUCTIONS Please read and save these instructions. Read carefully before using product. Protect yourself and others by observing all safety information, warnings and cautions.

More information

60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application

60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application WWW.PHIHONG.COM 60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3bt Standard Non-Vented Case with Mounting Bracket

More information

INSTALL INSTRUCTIONS RSXMR-9886-P-48

INSTALL INSTRUCTIONS RSXMR-9886-P-48 INSTALL INSTRUCTIONS RSXMR-9886-P-48 Installation Instructions RSXMR-9886-P-48 (CEQ. 20194) INSTALL INSTRUCTIONS RSXMR-9886-P-48 Contents Section Description Page 1 Copyright 2 1.1 Disclaimer 2 1.2 Warnings

More information

This guide provides basic information for Unitronics Models 230/260/280/290 (Non-color Screens).

This guide provides basic information for Unitronics Models 230/260/280/290 (Non-color Screens). Vision OPLC Installation Guide Models 230/260/280/290 (Non-color Screens) This guide provides basic information for Unitronics Models 230/260/280/290 (Non-color Screens). General Description Vision OPLCs

More information

BreezeMAX Wi² and BreezeACCESS Wi² Quick Installation Guide

BreezeMAX Wi² and BreezeACCESS Wi² Quick Installation Guide This Quick Installation Guide is intended for experienced installers. For more information refer to the relevant sections in the BreezeMAX Wi² and BreezeACCESS Wi² System Manual. Wi² Package Content Check

More information

OPLC Installation Guide

OPLC Installation Guide Samba OPLC SM35-J-R20/SM43-J-R20 SM70-J-R20 SM35-J-T20/SM43-J-T20 SM70-J-T20 OPLC Installation Guide 12 Digital Inputs, include 1 HSC/Shaft-encoder Input, 2 Analog inputs (only when the digital inputs

More information

Replacing the Power Supply

Replacing the Power Supply APPENDIX B This appendix includes information on how to replace the power supply for the Cisco AS550XM universal gateway and contains the following sections: Safety Recommendations, page B-1 Required Tools

More information

PowerLogic High Density Metering System 1-Meter Enclosure

PowerLogic High Density Metering System 1-Meter Enclosure PowerLogic High Density Metering System 1-Meter Enclosure Installation Guide 63230-508-211A1 Safety information PowerLogic High Density Metering System 1-Meter Enclosure Important information Read these

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Modules Installation Guide UIS-04PTN Uni-I/O is a family of Input/Output modules that are compatible with the UniStream control platform. This guide provides basic installation information for

More information

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application 33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection

More information

Three Phase Residential Solution for Australia, System Design and Installation Guidelines

Three Phase Residential Solution for Australia, System Design and Installation Guidelines Three Phase Residential Solution for Australia, System Design and Installation Guidelines This document describes how to design and install SolarEdge three phase inverters for residential installations.

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Modules Installation Guide UID-0808R, UID-0808T, UID-1600,UID-0016R, UID-0016T Uni-I/O is a family of Input/Output modules that are compatible with the UniStream control platform. This guide provides

More information

Installation Guide V290 (Color) This guide provides basic information for Unitronics LCD color touchscreen models V C30B and V T40B.

Installation Guide V290 (Color) This guide provides basic information for Unitronics LCD color touchscreen models V C30B and V T40B. Vision OPLC Installation Guide V290 (Color) This guide provides basic information for Unitronics LCD color touchscreen models V290-19-C30B and V290-19-T40B. General Description Vision OPLCs are programmable

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Modules Installation Guide UIA-0402N Uni-I/O is a family of Input/Output modules that are compatible with the UniStream control platform. This guide provides basic installation information for

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Wide Modules Installation Guide UID-W1616R, UID-W1616T Uni-I/O Wide is a family of Input/Output modules that are compatible with the UniStream control platform. Wide Modules are 1.5 times as wide

More information

Speed Dome Installation Manual

Speed Dome Installation Manual Speed Dome Installation Manual Version 1.0.2. Revised October 30 th, 2018 Contents Welcome... 3 Important Safeguards and Warnings... 3 1 INSTALLATION PREPARATION... 5 1.1 Basic Requirements... 5 1.2 Installation

More information

Vision OPLC V TR6/V350-J-TR6

Vision OPLC V TR6/V350-J-TR6 Vision OPLC V350-35-TR6/V350-J-TR6 Installation Guide The Unitronics V350-35-TR6/V350-J-TR6 offers the following onboard I/Os: 8 Digital Inputs, configurable via wiring to include 2 Analog (current/voltage)

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Modules Installation Guide UID-0808THS Uni-I/O is a family of Input/Output modules that are compatible with the UniStream control platform. This guide provides basic installation information for

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Wide Modules Installation Guide UIS-WCB1 Uni-I/O Wide is a family of Input/Output modules that are compatible with the UniStream control platform. Wide Modules are 1.5 times as wide as Uni-I/O

More information

MODEL SST3-MV INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SST3-MV SELECTABLE SIRENTONE-MULTI VOLT

MODEL SST3-MV INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SST3-MV SELECTABLE SIRENTONE-MULTI VOLT MODEL INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SELECTABLE SIRENTONE-MULTI VOLT INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SELECTABLE SIRENTONE-MULTI VOLT A. GENERAL. The Federal Model is a solid-state

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Vision OPLC V350-35-R34/V350-J-R34 Installation Guide The Unitronics V350-35-R34/V350-J-R34 offers the following onboard I/Os: 22 Digital Inputs, configurable via wiring to include 2 Analog and 3 HSC/Shaft-encoder

More information

AURORA. Photovoltaic Inverters INSTALLATION AND OPERATOR'S MANUAL

AURORA. Photovoltaic Inverters INSTALLATION AND OPERATOR'S MANUAL AURORA Photovoltaic Inverters INSTALLATION AND OPERATOR'S MANUAL Note: This document contains proprietary information of Power-One, Inc. The contents of this document or any part thereof should not be

More information

Outdoor PTZ. Mounting on the Ceiling Using Pendant Mount. Installation Guide. For Models: I93, I94, I95, I96, KCM /12/03

Outdoor PTZ. Mounting on the Ceiling Using Pendant Mount. Installation Guide. For Models: I93, I94, I95, I96, KCM /12/03 Outdoor PTZ Mounting on the Ceiling Using Pendant Mount For Models: I93, I94, I95, I96, KCM-8211 2013/12/03 Table of Contents Mounting Solutions... 3 Straight Tube Installation Procedures... 4 Step 1:

More information

GCI-5K INSTALLATION AND OPERATOR S MANUAL

GCI-5K INSTALLATION AND OPERATOR S MANUAL GCI-5K INSTALLATION AND OPERATOR S MANUAL Grid-tied inverter for wind Ningbo Ginlong Technologies 1 INTRODUCTION 2 SAFETY GUIDELINES AND WARNINGS 3 INSTALLATION 3.1 Selecting a location for the inverter

More information

Installation Manual SMA RS485 MODULE

Installation Manual SMA RS485 MODULE Installation Manual SMA RS485 MODULE MD.485-US-40 (PC-485.BG1) ENGLISH MD485-US-40-IA-en-10 Version 1.0 Legal Provisions SMA Solar Technology America LLC Legal Provisions No part of this document may be

More information

Solis Single Phase Inverter

Solis Single Phase Inverter PV Grid Tie Inverter Solis Single Phase Inverter Installation and Operation Manual Ningbo Ginlong Technologies Co., Ltd. No. 57 Jintong Road, Binhai Industrial Park, Xiangshan, Ningbo, Zhejiang, 315712,

More information

B-Box H Installation Guidance

B-Box H Installation Guidance B-Box H Installation Guidance 27th_Sep.2017 1 / 22 Contents SAFETY... 3 1 PRODUCT OVERVIEW... 4 2 BCU INTRODUCTION... 6 3 DESCRIPTION OF B-PLUS-H INTERFACE AND TERMINAL... 8 4 B-BOX HV INVERTER CONFIGURATION

More information

The identified danger could cause physical and property damage.

The identified danger could cause physical and property damage. Samba OPLC SM35-J-T20 Installation Guide The Unitronics SM35-J-T20 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include 2 Analog and 3 HSC/Shaft-encoder Inputs 8 Transistor

More information

UniStream HMI Panel. CPU-for-Panel

UniStream HMI Panel. CPU-for-Panel UniStream HMI Panel Installation Guide USP-070-B10,USP-104-B10, USP-156-B10 Unitronics UniStream platform comprises control devices that provide robust, flexible solutions for industrial automation. This

More information

22 Digital Inputs, including 2 Analog, 2 HSC/Shaft-encoder inputs 16 Transistor Outputs

22 Digital Inputs, including 2 Analog, 2 HSC/Shaft-encoder inputs 16 Transistor Outputs Vision PLC+HMI V130-33-T38/V130-J-T38 V350-35-T38/V350-J-T38 V430-J-T38 Installation Guide 22 Digital Inputs, including 2 Analog, 2 HSC/Shaft-encoder inputs 16 Transistor Outputs General Description All

More information

Huawei FusionHome Smart Energy Solution

Huawei FusionHome Smart Energy Solution Smarter Energy for a Better Life Huawei FusionHome Smart Energy Solution Smart Energy Center SUN2000-3.8/5/7.6/9/10/11.4KTL-USL0 Higher Yields High efficiency inverter topology, CEC efficiency 99% Simple

More information

Solar Combiner Enclosure

Solar Combiner Enclosure Installation Instructions Solar Combiner Enclosure Catalog Numbers 1000-SB006, 1000-SB012 Topic Page Description 1 Important Safety Instructions 3 Nameplate Data 4 Planning for Installation 4 Install the

More information

Bulletin Installation of Solar Photovoltaic Systems Section 50; Rules: , , ; Tables 11 and 19 Issued July 2010

Bulletin Installation of Solar Photovoltaic Systems Section 50; Rules: , , ; Tables 11 and 19 Issued July 2010 Ontario Electrical Safety Code - Bulletins 50-1-0 Bulletin 50-1-0 Installation of Solar Photovoltaic Systems Section 50; Rules: 84-020, 84-024, 84-030; Tables 11 and 19 Issued July 2010 Scope (1) Introduction

More information

User s Manual. ACS550-PD 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual

User s Manual. ACS550-PD 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual User s Manual ACS550-PD 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual 2 ACS550-PD 3R Irrigation Packaged Drive ACS550 Drive Manuals GENERAL MANUALS ACS550-U1 User s Manual (1 200 HP)

More information

SAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION. NI CompactDAQ Four-Slot Controller with Quad-Core Processor

SAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION. NI CompactDAQ Four-Slot Controller with Quad-Core Processor SAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION NI cdaq -9136 NI CompactDAQ Four-Slot Controller with Quad-Core Processor This document includes compliance precautions and connection information for

More information

EX-RC1 Remote I/O Adapter

EX-RC1 Remote I/O Adapter EX-RC1 Remote I/O Adapter The EX-RC1 interfaces between Unitronics Vision OPLCs and remote I/O Expansion Modules distributed throughout your system. The adapter is connected to a PLC via CANbus. Each adapter

More information

ILUMEN PID SOLUTION INDOOR OUTDOOR ILUMEN PIDBOX MINI INSTALLATION MANUAL. Ilumen PIDbox mini Version 1.5

ILUMEN PID SOLUTION INDOOR OUTDOOR ILUMEN PIDBOX MINI INSTALLATION MANUAL. Ilumen PIDbox mini Version 1.5 ILUMEN PID SOLUTION ILUMEN PIDBOX MINI INSTALLATION MANUAL INDOOR OUTDOOR Ilumen PIDbox mini Version 1.5 1 TABLE OF CONTENT 1 Information on this manual... 3 1.1 Validity... 3 1.2 Target group... 3 1.3

More information

Mounting on the Ceiling Using Flush Mount (Face Down)

Mounting on the Ceiling Using Flush Mount (Face Down) Mounting on the Ceiling Using Flush Mount (Face Down) Installation Guide 2014/02/14 Table of Contents Safety Information... 3 Installation Procedures... 5 Step 1: Drill a Hole on the Ceiling... 5 Step

More information

Installation Manual. Table of Contents

Installation Manual. Table of Contents Table of Contents Table of Contents... 4-1 4.1 Confirming the Installation Preparations... 4-1 4.2 Installation Flowchart... 4-1 4.3 Mounting the Switch to the Designated Position... 4-2 4.3.1 Mounting

More information

Model#: IN-DO3MIRF 3MP Outdoor Dome with True Day/Night, IR, Basic WDR, Fixed lens

Model#: IN-DO3MIRF 3MP Outdoor Dome with True Day/Night, IR, Basic WDR, Fixed lens Model#: IN-DO3MIRF 3MP Outdoor Dome with True Day/Night, IR, Basic WDR, Fixed lens Hardware User Manual (PoE) 2013/03/06 Table of Contents Precautions... 3 Introduction... 4 Package Contents... 4 Safety

More information

PV Rapid Shutdown device

PV Rapid Shutdown device PV Rapid Shutdown device Installation and Operation Manual Solis-RSD-1G(1:1) Solis-RSD-1G(2:2) Manufacturer: Ginlong (Ningbo) Technologies Co.,Ltd., Ningbo, Zhejiang, P.R.China US Office: 565 Metro Pl.

More information

Quick Start Guide. AR530&AR550 Series Industrial Switching Routers. Issue: 07 ( ) Part number: HUAWEI TECHNOLOGIES CO.

Quick Start Guide. AR530&AR550 Series Industrial Switching Routers. Issue: 07 ( ) Part number: HUAWEI TECHNOLOGIES CO. Quick Start Guide AR0&AR0 Series Industrial Switching Routers Issue: 0 (0--0) Part number: 0 HUAWEI TECHNOLOGIES CO., LTD Packing List AR0 series industrial switching router (with the product model on

More information

Instruction Manual: IM E

Instruction Manual: IM E Innovative Technology TVSS Products The I.T. Equalizer Installation Instruction Manual: IM01005011E Rev. 2 May 2009 Contents Page 1 Introduction... 1 1.1 Scope... 1 1.2 I.T. Equalizer Catalog Numbering

More information

User Manual. Solar Inverter for Water Pump

User Manual. Solar Inverter for Water Pump User Manual Solar Inverter for Water Pump SP Revival Series Version: 1.2 Table Of Contents ABOUT THIS MANUAL... 1 Purpose... 1 Scope... 1 SAFETY INSTRUCTIONS... 1 Inspection... 1 Installation... 1 Operation...

More information

Quick Start. This document describes how to install the Juniper Networks PTX5000 Packet Transport

Quick Start. This document describes how to install the Juniper Networks PTX5000 Packet Transport PTX5000 Packet Transport Router Quick Start September 2017 Part Number: 530-066788 Revision 01 This document describes how to install the Juniper Networks PTX5000 Packet Transport Router. Contents Quick

More information

PV Grid-Connected Inverter

PV Grid-Connected Inverter PV Grid-Connected Inverter Product Model: Sofar 50~70KTL (2018.03.07) ADD:Building NO.4,Antongda Industrial Park,NO.1,Liuxian Avenue, Bao an District,Shenzhen,China Shenzhen SOFARSOLAR Co.,Ltd. Preface

More information

Installation Guide for America Solar Wholesale Photovoltaic Modules

Installation Guide for America Solar Wholesale Photovoltaic Modules Installation Guide for America Solar Wholesale Photovoltaic Modules Mono Module Poly Module 1 ASW Photovoltaic Module Installation Guide Installation guide for American Solar Wholesale Photovoltaic modules

More information

V TU24 V350-J-TU24

V TU24 V350-J-TU24 Vision PLC+HMI V350-35-TU24 V350-J-TU24 Installation Guide 12 Digital Inputs, including 2 Analog, 2 PT100/TC,1 HSC/Shaft-encoder input 12 Transistor Outputs General Description All of the controllers covered

More information

INJ-24A Series Quick Installation Guide

INJ-24A Series Quick Installation Guide INJ-24A Series Quick Installation Guide Moxa High-Power PoE+ Injector Edition 4.1, August 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777

More information

Sunny Boy 2100TL Transformerless solar inverter Installation Guide

Sunny Boy 2100TL Transformerless solar inverter Installation Guide Sunny Boy 2100TL Transformerless solar inverter Installation Guide SB2100TL-11:SE0204 Table of Contents 1 Introduction................... 3 2 Safety Instructions............... 5 3 Overview.....................

More information

Thermal Hybrid PTZ Camera Quick Start Guide

Thermal Hybrid PTZ Camera Quick Start Guide Thermal Hybrid PTZ Camera Quick Start Guide Version 1.0.0 Table of Contents 1 PTZ INSTALLATION... 1 1.1 Installation Preparation... 1 1.1.1 Check installation space and intension... 1 1.1.2 About cable...

More information

User s Manual. ACS550-PD Stock 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual

User s Manual. ACS550-PD Stock 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual User s Manual ACS550-PD Stock 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual 2 ACS550-PD 3R Irrigation Packaged Drive ACS550 Drive Manuals GENERAL MANUALS ACS550-U1 User s Manual (1

More information

General Description V TR34/V130-J-TR34 V TR34/V350-J-TR34 V430J-R34 V R34/V130-J-R34 V R34/V350-J-R34

General Description V TR34/V130-J-TR34 V TR34/V350-J-TR34 V430J-R34 V R34/V130-J-R34 V R34/V350-J-R34 Vision OPLC V130-33-TR34/V130-J-TR34 V350-35-TR34/V350-J-TR34 V430-J-TR34 V130-33-R34/V130-J-R34 V350-35-R34/V350-J-R34 V430-J-R34 Installation Guide 22 Digital Inputs, including 3 HSC/Shaft-encoder Inputs,

More information

High Speed Remote I/O Module

High Speed Remote I/O Module High Speed Remote I/O Module EXF-RC15 The Unitronics EXF-RC15 is a High Speed Remote I/O Module that offers three High Speed Counter inputs and four high speed outputs. Overall, the EXF-RC15 offers 9 digital

More information

-5K-2G. Solar PV Grid Tie Inverter. inverter. Installation and Operation Manual. 2013, Ningbo Ginlong Technologies Co., Ltd.

-5K-2G. Solar PV Grid Tie Inverter. inverter. Installation and Operation Manual. 2013, Ningbo Ginlong Technologies Co., Ltd. Solar PV Grid Tie Inverter -5K-2G inverter Installation and Operation Manual Ver 1.0 Ningbo Ginlong Technologies Co., Ltd. No. 57 Jintong Road, Binhai Industrial Park, Xiangshan, Ningbo, Zhejiang, 315712,

More information

MAKING MODERN LIVING POSSIBLE DLX. Installation Guide DLX DLX DLX DLX 4.6 SOLAR INVERTERS

MAKING MODERN LIVING POSSIBLE DLX. Installation Guide DLX DLX DLX DLX 4.6 SOLAR INVERTERS MAKING MODERN LIVING POSSIBLE DLX Installation Guide DLX 2.0 - DLX 2.9 - DLX 3.8 - DLX 4.6 SOLAR INVERTERS Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed

More information

HITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions

HITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions HITACHI EH-150 series PLC Resistance Temperature Detective input module Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction

More information

GV-IPCam H.264. Hardware Manual. Vandal Proof IP Dome Target Vandal Proof IP Dome

GV-IPCam H.264. Hardware Manual. Vandal Proof IP Dome Target Vandal Proof IP Dome GV-IPCam H.264 Hardware Manual Vandal Proof IP Dome Target Vandal Proof IP Dome Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future

More information

Vision OPLC. V T38 Installation Guide. General Description

Vision OPLC. V T38 Installation Guide. General Description Vision OPLC V130-33-T38 Installation Guide The Unitronics V130-33-T38 offers the following onboard I/Os: 22 Digital Inputs, configurable via wiring to include 2 Analog and 2 HSC/Shaft-encoder Inputs 16

More information

F1000 User's Manual. (Version: V1.01)

F1000 User's Manual. (Version: V1.01) (Version: V1.01) Contents Chapter 1 Overview... 2 Chapter 2 Installation... 3 2.1 Installation guide... 3 2.1.1 Installation position... 3 2.1.2 NEMA4 standard installation... 3 2.1.3 Environment precautions...

More information

This guide provides basic information for Unitronics controller model V T2.

This guide provides basic information for Unitronics controller model V T2. Vision OPLC 12 pnp/npn Digital, including 2 Analog, 3 HSC/Shaftencoder Inputs, 12 Transistor Outputs This guide provides basic information for Unitronics controller model V350-35-T2. General Description

More information

UniStream CPU-for-Panel

UniStream CPU-for-Panel UniStream CPU-for-Panel Installation Guide USC-P-B10 Unitronics UniStream platform comprises control devices that provide robust, flexible solutions for industrial automation. This guide provides basic

More information

Installing Power Modules

Installing Power Modules This chapter contains the procedures for installing cards and modules into the chassis after the chassis has been installed into a rack. This chapter also describes how to connect cables to RSP, RP, alarm,

More information

Enphase S-Series Microinverter and Engage Cable Safety

Enphase S-Series Microinverter and Engage Cable Safety SAFETY Enphase S-Series Microinverter and Engage Cable Safety Important Safety Information (S280-60-LL and S230-60-LL) This document contains important instructions to use during installation of the Enphase

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-COM Modules Installation Guide UAC-01RS2,UAC-02RS2,UAC-02RSC Uni-COM is a family of communication modules that are compatible with the UniStream control platform. This guide provides basic installation

More information

TN-5308 Quick Installation Guide

TN-5308 Quick Installation Guide TN-5308 Quick Installation Guide Moxa ToughNet Switch Edition 6.0, February 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777

More information

NCH-1000 (Multiple Breaker Types) Installation Instructions

NCH-1000 (Multiple Breaker Types) Installation Instructions 20M1 12345678 NCH-1000 (Multiple Breaker Types) Installation Instructions DOC. #560502100 C 7/30/04 PRINTED IN U.S.A. Regulatory Compliance Safety This device has been tested and found to be in compliance

More information

Installation Guide V1210-T20BJ This guide provides basic information for Unitronics controllers V1210-T20BJ.

Installation Guide V1210-T20BJ This guide provides basic information for Unitronics controllers V1210-T20BJ. Vision OPLC V1210-T20BJ This guide provides basic information for Unitronics controllers V1210-T20BJ. General Description V1210 OPLCs are programmable logic controllers that comprise a built-in operating

More information

INSTALLATION GUIDE. AXIS 291 1U Video Server Rack ENGLISH FRANÇAIS DEUTSCH ITALIANO ESPAÑOL

INSTALLATION GUIDE. AXIS 291 1U Video Server Rack ENGLISH FRANÇAIS DEUTSCH ITALIANO ESPAÑOL INSTALLATION GUIDE AXIS 291 1U Video Server Rack ENGLISH FRANÇAIS DEUTSCH ITALIANO ESPAÑOL AXIS Video Server Rack Installation Guide Page 3 Axis Rack Mounted Video Server Solution This installation guide

More information

MODEL 8000MP LEVEL SENSOR

MODEL 8000MP LEVEL SENSOR 1 MODEL 8000MP LEVEL SENSOR INSTRUCTIONS FOR INSTALLATION, OPERATION & MAINTENANCE VISIT OUR WEBSITE SIGMACONTROLS.COM 2 SERIES 8000MP LEVEL SENSOR 1. DESCRIPTION The Model 8000MP Submersible Level Sensor

More information

M215 Microinverter Installation Planning

M215 Microinverter Installation Planning TECHNICAL BRIEF M215 Microinverter Installation Planning The M215 Microinverter The M215 Microinverter is a powerful and efficient grid-tied microinverter. It is compatible with most 60- cell PV modules

More information

Specifications, Installation, and Operating Instructions

Specifications, Installation, and Operating Instructions Specifications, Installation, and Operating Instructions Model: Power Vantage AC Panel Protector CAUTION: The installation of a surge protection device () must be done by qualified electrical personnel.

More information

SmartLogger1000. User Manual. Issue 09. Date HUAWEI TECHNOLOGIES CO., LTD.

SmartLogger1000. User Manual. Issue 09. Date HUAWEI TECHNOLOGIES CO., LTD. Issue 09 Date 2016-08-15 HUAWEI TECHNOLOGIES CO., LTD. 2016. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of

More information