Plexxi HCN Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
|
|
- Shana Mills
- 6 years ago
- Views:
Transcription
1 Plexxi HCN Plexxi Connect Installation, Upgrade and Administration Guide Release May 3, Innovative Way - Suite 3322 Nashua, NH Tel PLEX (7539)
2 Legal Notices The information contained herein is subject to change without notice. Plexxi, the Plexxi logo, and LightRail are registered trademarks, and Plexxi HCN, Plexxi Control and Plexxi Connect are trademarks of Plexxi, Inc. in the United States and other countries. Other product or service name may be trademarks or service marks of others. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Plexxi, Inc. Plexxi, Inc. reserves all rights of copyright in this documentation. PLEXXI, INC. PROVIDES THIS DOCUMENTATION AS IS, WITHOUT WARRANTY, TERM, OR CONDITION OF ANY KIND, EITHER IMPLIED OR EXPRESSED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES, TERMS, OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. Plexxi, Inc. reserves the right to make changes to equipment design or program components described in this documentation, as progress in engineering, manufacturing methods, or other circumstances may warrant. No responsibility is assumed for the use of Plexxi, Inc. software or hardware, all rights, obligations and remedies related to which are as set forth in the applicable sales and license agreements. Plexxi, Inc. 100 Innovative Way - Suite 3322 Nashua, NH Tel: PLEX (7539) Published May 3, 2018 Printed in United States of America. Copyright 2018 Plexxi, Inc. All rights reserved. 2 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
3 Table of Contents Legal Notices...2 Introduction...4 Related Documentation...4 Contacting Plexxi Support Installation Considerations...5 Prerequisites... 5 Required Plexxi Connect Software... 5 Supported Hypervisors... 5 Operating System... 5 VM Requirements... 5 Secure Passwords Deploying a Plexxi Connect VM using OVA in VMware vsphere...6 Downloading the OVA File... 6 Deploying the Plexxi Connect VM Installing Plexxi Connect using an ISO File Downloading the ISO File Preparing to Run the ISO - Nutanix Preparing to Run the ISO - VMWare Follow the ISO Prompts Troubleshooting Menu Creating Pack Configurations and Registering the VMware vsphere Plugin Upgrading Plexxi Connect Administering Plexxi Connect Assigning a Static IP Address to Plexxi Connect Changing the Plexxi Connect Hostname Plexxi Connect Installation, Upgrade and Administration Guide Release
4 Introduction This document, which describes Plexxi Connect installation/vm provisioning, is written for network installers and administrators who manage Plexxi fabrics connected to virtual environments running VMware vsphere and/or Nutanix Prism. You can install Plexxi Connect using either: OVA installation/deployment, or by creating a VM and installing Plexxi Connect on the VM using an ISO file. Related Documentation The following documentation supports this release: Plexxi Connect Release Notes for Release Plexxi Software Compatibility Matrix, version 10 or greater, which identifies compatibility between the versions of Plexxi software and identifies software upgrade paths/compatibility. Plexxi Connect UI Online Help, available in the Plexxi Connect UI This documentation (except the Online Help) is available on the Resources > Technical Publications page of Contacting Plexxi Support Plexxi Technical Support services are available to answer your questions and to make sure that your software and hardware continue to operate properly. You can contact Plexxi Support at: support@plexxi.com (US/Canada toll-free) (US/International) 4 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
5 1 Installation Considerations Prerequisites The appropriate version of Plexxi Control software is installed: IMPORTANT: For software version compatibility, refer to the latest version of the Plexxi Software Compatibility Matrix document available on the Resources > Technical Publications page of Required Plexxi Connect Software Plexxi Connect installation file using either the OVA or ISO format as defined in the install procedures. IMPORTANT: For software version compatibility, refer to the Plexxi Software Compatibility Matrix document available on the Resources > Technical Publications page of Supported Hypervisors VMware ESXi Nutanix AHV IMPORTANT: If you need to install Plexxi Connect on a different hypervisor, contact Plexxi Support before attempting the installation. Operating System The installation deploys a Linux (CentOS) VM. VM Requirements To support Plexxi Connect, the Plexxi Connect virtual machine (VM) must meet the following minimum requirements: 2 CPUs 8 GB RAM 50 GB disk Secure Passwords A secure Linux Administrator password to be configured after installing Plexxi Connect. A secure Plexxi Connect Administrator password to be configured after installing Plexxi Connect. Plexxi Connect Installation, Upgrade and Administration Guide Release
6 2 Deploying a Plexxi Connect VM using OVA in VMware vsphere Plexxi Connect can be installed from an OVA file designed for VMware vsphere environments. In this section, you will use OVA from a VMware vsphere Web Client to deploy a new VMware VM to host the Plexxi Connect software. Downloading the OVA File 1. Determine the version of Plexxi Connect software to install. IMPORTANT: You can refer to the Plexxi Compatibility Matrix for software compatibility. 2. Login to and navigate to the download directory for the version of Plexxi Connect software. The path is: Connect/releases/<version>. 3. Download the OVA file, PlexxiConnect- version-###.ova. Deploying the Plexxi Connect VM Deploy the Plexxi Connect VM using OVA as follows: IMPORTANT: The screens and content in this procedure represent screens you should see. Your installation will contain different servers and values, etc. 1. Save the downloaded OVA file in an appropriate location for the OVA installation 2. Connect and log into the VMware vsphere Web Client. IMPORTANT: If you are logging into vsphere 6.0 or older, you may be prompted to install the Client Integration Plug-in in your web browser. If prompted, you must install the Client Integration Plug-in to enable OVA installation from your web browser. 3. Select a vsphere server or a specific ESX host. 6 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
7 4. Select Deploy OVF Template from the Actions menu or by right-clicking the hypervisor and selecting Deploy OVF Template. The OVF window opens. 5. In Select source, browse for the PlexxiConnect- version-###.ova file either locally or remotely as saved above. Click Next. 6. Verify the Plexxi Connect OVF template details. Click Next. Plexxi Connect Installation, Upgrade and Administration Guide Release
8 7. Read the end user license agreement and click Accept to accept the license agreement. Click Next. 8. Enter a name and select a folder for the Plexxi Connect VM. Click Next. 8 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
9 9. In Select storage, select the virtual disk format, VM Storage Policy (Datastore Default) and select the datastore for the VM. Click Next. 10. In Setup Networks, select the source network (vswitch or port group). Click Next. Plexxi Connect Installation, Upgrade and Administration Guide Release
10 11. In Customize template, enter a VM hostname, domain name, primary NTP server, secondary server, and set up either static IP or DHCP. In A) Network General Settings, configure: The Hostname for the Plexxi Connect VM host; for example, plexxi-connect. The Domain Name on the Plexxi Connect VM resides. This should be a valid DNS domain name, or if the network/deployment environment does not have a domain, you can use "localdomain" as the domain name. Time Servers (NTP): IP addresses or hostnames of the primary and secondary Network Time Servers (NTP) that Plexxi Connect will use to synchronize its internal clock. It is STRONGLY recommended to use NTP servers to ensure that all elements of the Plexxi system have the most accurate time & date settings. Note that when using DHCP, the NTP server information will not need to be provided. You should confirm that your DHCP server is properly configured to provide NTP server(s) when fulfilling DHCP requests. In B) Network Static IP Settings, configure: For static IP, enter the IP Address, Network Mask, and Default Gateway as needed for your environment. DNS Servers: For static IP, provide the IP address of the primary and secondary DNS servers that Plexxi Connect will use to resolve hostnames. When using DHCP, DNS server information is not needed. 10 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
11 In C) Network DHCP Settings, configure: Use DHCP: Check this option if DHCP is used. IMPORTANT: If you use DHCP, you must reserve an IP address on the DHCP server. 12. When finished, click Next. 13. In Ready to complete, verify the entered configuration settings. Click Finish. 14. You can monitor the OVA Install progress in the Recent Tasks window: 15. When finished, in vsphere, locate and Power On the new VM. Plexxi Connect Installation, Upgrade and Administration Guide Release
12 16. Verify the installation. In a Web browser, enter the URL and log into the UI. The URL format is: Plexxi Connect UI: Plexxi Prism UI: Log in as administrator using the default credentials: Username: admin Password: plexxi Verify that the UI opens successfully. 17. Plexxi recommends that you change the Plexxi Connect admin user password to a secure password as described in the Plexxi Connect UI online help. 18. While logged into the Plexxi Connect UI as administrator, you must create (add): One Plexxi Control pack configuration. VMware vsphere and/or Nutanix Prism pack configurations as needed for your environment. While in the Plexxi Connect UI, refer to the Plexxi Connect Help for information on adding pack configurations. 19. Plexxi recommends that you connect to the new VM and change the default Linux password for the admin user account. 20. Optionally, type <ctrl>-d to logout from the Linux session. The Plexxi Connect installation is complete. Disregard all other installation chapters. 12 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
13 3 Installing Plexxi Connect using an ISO File Plexxi Connect can be installed on a Nutanix VM or a VMware VM from an ISO file as described in this section. Downloading the ISO File 1. Determine the version of Plexxi Connect software to install. IMPORTANT: You can refer to the Plexxi Compatibility Matrix for software compatibility. 2. Login to and navigate to the download directory for the version of Plexxi Connect software. The path is: Connect/releases/<version>. 3. Download the ISO installer file, PlexxiConnect- version-###.iso. Preparing to Run the ISO - Nutanix Deploy a new VM to host Plexxi Connect and install Plexxi Connect on the VM as follows: 1. Open and log into Nutanix Prism TM Central server where Plexxi Connect will be deployed. 2. Upload the ISO file that you downloaded to Prism Central. 3. Logout of Nutanix Prism Central. 4. Open and log into Nutanix Prism TM where Plexxi Connect will be deployed. 5. Create a new VM for Plexxi Connect using the following minimum Plexxi-specific parameters: a. In Name, enter the name of the new VM. b. Optionally enter a VM Description. c. In VCPU(S), enter the number of CPUs. The minimum is 2 CPUs. d. Enter the number of cores per VCPU. e. Enter Memory size in GiB. The minimum is 8 GiB. f. In Disks, add a new disk with a minimum size of 50 GiB. g. In Disks, in the CD-ROM row, click the Edit icon, select Clone from Image Service, select the Plexxi Connect ISO image, and click Update. h. In Disks, select the CD-ROM as the Boot Device, to boot from the Plexxi Connect ISO installer file. i. In Network Adapters, add a NIC to the VM. j. (Optional) In VM Host Affinity, click Set Affinity, select the host, then click Save. k. Click Save to save the new VM. 6. Select VM > Table. 7. Select the new VM and scroll to the VM Summary at the bottom of the page. 8. Power ON the VM. 9. Immediately when Launch Console becomes active, launch a VM console. The ISO launches and the installer Main menu opens in the Console. IMPORTANT: A timer counts down and then the static IP installation will begin automatically. To stop the timer, press the down-arrow key. 10. Continue with the section, Follow the ISO Prompts. Plexxi Connect Installation, Upgrade and Administration Guide Release
14 Preparing to Run the ISO - VMWare In this section, you will be asked to deploy a new VMware VM to host the Plexxi Connect software. Install Plexxi Connect as follows: 1. Open the VMware vsphere TM Web Client. 2. Upload the Plexxi Connect ISO file (PlexxiConnect-version-###.iso) to a datastore accessible from the ESXi server where Plexxi Connect will be deployed. IMPORTANT: For software version compatibility, refer to the Plexxi Compatibility Matrix document available on the Resources > Technical Publications page of 3. Create a new VM for Plexxi Connect. You will need to configure the following Plexxi -specific parameters: l. Select Guest OS Family = Linux. m. Select Guest OS Version = CentOS 4/5/6/7 (64-bit). n. In Customer Hardware, select CPU = minimum 2 CPUs. o. Set Memory = minimum 8 GB. p. Set New Hard Disk = minimum 50 GB. q. Select New CD/DVD Drive = Datastore ISO File. r. In Select File, select the Plexxi Connect ISO file in the datastore where it was uploaded. s. Select (check) the Connect At Power On checkbox. t. Finish creating the VM. 4. Configure the VM to boot from the Plexxi Connect ISO installer file. 5. Power ON the VM. 6. Immediately launch a remote VM console. The ISO launches and the installer main menu opens in the Console. IMPORTANT: A timer counts down, then the static IP installation will begin automatically. To stop the timer, press the down-arrow key. 7. Continue with the next section, Follow the ISO Prompts. 14 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
15 Follow the ISO Prompts The following is a sample main installer screen: IMPORTANT: As shown below, a timer counts down, then the static IP installation will begin automatically. To stop the timer, press the down-arrow key. Install Plexxi Connect (Static IP): Static IP is the Default and recommended option. Use this option to install Plexxi Connect using a statically assigned IP address. You will provide a Hostname, Domain name, IP Address, Netmask, Gateway, Name Servers (DNS), and optionally a VLAN ID and NTP server(s). Install Plexxi Connect (DHCP): Use this installation option to install Plexxi Connect and use DHCP to assign the Hostname, Domain name, and optionally NTP server(s). Troubleshooting: Open the Troubleshooting menu. 8. With the desired menu choice selected, press Enter to launch the installation. Progress messages appear as the installation progresses. 9. The Plexxi End User License Agreement (EULA) opens. Use the Page Up and Page Down keys to scroll and review the EULA. To accept the agreement, select the Accept button, then press Enter. Plexxi Connect Installation, Upgrade and Administration Guide Release
16 10. Complete the following network information, then when finished, select OK and press Enter. For Static IP Complete the fields as follows: Hostname: Enter the host name for the VM. Domain name: Enter the domain name for the domain in which the host resides. Enter the domain name only, not a fully qualified domain name. If the network/deployment environment does not have a domain, you can specify "localdomain" as the domain name. NTP Servers: Optional: Enter NTP server names or IP addresses. IP Address: Enter a valid IP address for this Plexxi Connect host. Netmask: Enter the network mask using either dot-decimal or CIDR (omit the slash) notation. Gateway: Enter a valid gateway address. VLAN ID: Enter a VLAN ID (1-4095) or 0 (default) if not using a VLAN. WARNING: The VLAN ID field should only be used when: o o o software is being installed on 'bare metal' (non-hypervisor) servers. management traffic must be sent over a tagged VLAN.' when the VM is on a Plexxi fabric, only ID's are valid. If you're deployment does not meet these criteria, do not change the default value (0). Name Servers: Enter the IP addresses for DNS name servers, separated by spaces. 16 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
17 For DHCP Complete the fields as follows: Hostname: Enter the host name for the VM. Domain name: Enter the domain name for the domain in which the host resides. Enter the domain name only, not a fully qualified domain name. If the network/deployment environment does not have a domain, you can specify "localdomain" as the domain name. NTP Servers: Optional: Enter NTP server names or IP addresses. Error Notifications If you enter an invalid value in a parameter, when you click OK and Enter to continue, you will be notified with an error message in Red text. Examples include: ERROR: Gateway is not on the same network. ERROR: Nameserver sample.company.com is not a valid IP address. ERROR: Invalid hostname vm1_company.com. In this case, the hostname contains an invalid character (underscore). 11. When finished entering network information, tab to select OK, then press Enter. Progress messages appear as the installation progresses. The installation will take a few minutes. Plexxi Connect Installation, Upgrade and Administration Guide Release
18 12. When the installation completes, the Linux login prompt will appear. You can login using the following default credentials: user: admin password: plexxi IMPORTANT: The IP address of the Plexxi Connect VM appears in the Linux output before the login prompt as illustrated above. The Plexxi Connect VM IP address can also be found in vsphere on the Summary tab for the new VM. When DHCP is used, you can obtain the IP directly from the console without logging in. 13. Verify the installation. In a Web browser, enter the URL and log into the UI. The URL format is: Plexxi Connect UI: Plexxi Prism UI: Log in as administrator using the default credentials: Username: admin Password: plexxi Verify that the UI opens successfully. 14. Plexxi recommends that you change the Plexxi Connect admin user password to a secure password as described in the Plexxi Connect UI online help. 15. While logged into the Plexxi Connect UI as administrator, you must create (add): One Plexxi Control pack configuration. VMware vsphere, VMware NSX and Nutanix Prism pack configurations as needed for your environment. While in the Plexxi Connect UI, refer to the Plexxi Connect Online Help for information on adding pack configurations. 16. Plexxi recommends that you connect to the new VM and change the default Linux password for the admin user account. 17. Optionally, type <ctrl>-d to logout from the Linux session. 18. The Plexxi Connect installation is complete. Disregard all other installation chapters. 18 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
19 Troubleshooting Menu Selecting Troubleshooting from the main menu opens the following Troubleshooting menu: Rescue an existing system: Rescue a previously installed Linux system. Run a memory test: Use this utility to test the system memory and verify that it is working correctly. Boot from local drive: Attempt to boot the system from the local drive, using the boot order as defined in the system BIOS. Return to main menu: Return to the main installer menu.. Plexxi Connect Installation, Upgrade and Administration Guide Release
20 4 Creating Pack Configurations and Registering the VMware vsphere Plugin Before you can use any installed pack, you must create one or more pack configurations using the Plexxi Connect UI as described in the Plexxi Connect Online Help. Additionally, Plexxi Connect supports a VMware vsphere Plugin which must be registered with VMware before it can be used. If you will use the VMware vsphere plugin, in the Plexxi Connect UI, you must first: Create a VMware vsphere pack configuration. Register the vsphere plugin with VMware. For further information on creating pack configurations and registering vsphere packs, refer to the Plexxi Connect Online Help. 20 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
21 5 Upgrading Plexxi Connect To upgrade Plexxi Connect: 1. Download the file: PlexxiConnect_Upgrade-version-xxxx.tar.gz 2. Upload the upgrade file to Plexxi Connect: scp PlexxiConnect_Upgrade-version-xxxx.tar.gz or Hostname>:/var/tmp 3. SSH to Plexxi Connect: ssh or Hostname> 4. Change to the /var/tmp directory: cd /var/tmp 5. Create a tmp directory: mkdir tmp 6. Extract the upgrade: tar xzf PlexxiConnect_Upgrade-version-xxxx.tar.gz -C tmp/ 7. Install the upgrade: cd tmp && sudo./upgrade-plexxiconnect.sh *.rpm 8. Accept the packages to be installed: Plexxi Connect Installation, Upgrade and Administration Guide Release
22 9. Read the End User License Agreement and click Accept to accept the license agreement: 10. After the upgrade completes successfully, close any browsers connected to Plexxi Connect 11. At the Linux prompt, reboot the Plexxi Connect VM: sudo reboot 12. Upon reboot, the VMware vsphere plugin will automatically update. If you are logged into the vsphere Web Client during the Plexxi Connect upgrade, logout of the vsphere Web Client and log back in using the account settings from the vsphere Pack Configuration that you used to register the plugin. This will complete the plug-in upgrade and allow you to continue. 22 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
23 6 Administering Plexxi Connect Assigning a Static IP Address to Plexxi Connect If static IP needs to be configured for Plexxi Connect, post Plexxi Connect installation, it can be configured as follows: 1. Ensure that the network is connected to the Plexxi Connect VM. 2. Login to the Plexxi Connect console as admin. The default password is plexxi. 3. Using an edit utility with sudo, edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file as follows: For example, if using VI: sudo vi /etc/sysconfig/network-scripts/ifcfg-eth0 Remove the following lines: PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no DEFROUTE=yes Change the BOOTPROTO and ONBOOT lines: BOOTPROTO=static ONBOOT=yes Add the following lines, substituting appropriate values: IPADDR= NETMASK= GATEWAY= Run the following command (sudo password is plexxi): sudo /opt/plexxi/scripts/enable-network.sh 5. After 2-3 minutes, execute the ip addr command to ensure that an IP address has been assigned. Plexxi Connect Installation, Upgrade and Administration Guide Release
24 Changing the Plexxi Connect Hostname To change the Plexxi Connect hostname: 1. Log in to Plexxi Connect through either SSH or a console as user: admin. If not already changed, the default password is plexxi 2. Enter the following command: Note that the sudo password is plexxi. sudo vi /etc/hosts 3. Append to the end of the file: if using FQDN, use an alias as well. For example: hostname.domain.com hostname otherwise use the format: hostname 4. Configure a new hostname using the command: sudo hostnamectl set-hostname <hostname> 5. Enter the command: sudo /opt/plexxi/scripts/enable-network.sh 6. Reboot the host: sudo reboot 24 Plexxi Connect Installation, Upgrade and Administration Guide Release 3.0.0
Plexxi HCN Control Software Installation, Upgrade and Administration Guide Release through 3.3.0
Plexxi HCN Control Software Installation, Upgrade and Administration Guide Release 3.2.2 through 3.3.0 December 8, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com
More informationPlexxi Control Installation, Upgrade and Administration Guide Release 3.2.0
Plexxi Control Installation, Upgrade and Administration Guide Release 3.2.0 702-20002-10 Rev 3.0 June 27, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com
More informationPlexxi Connect vsphere Plugin User Guide Releases through 2.5.0
Plexxi HCN Plexxi Connect vsphere Plugin User Guide Releases 2.3.0 through 2.5.0 December 13, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com Legal Notices
More informationPlexxi Connect Release Notes
Plexxi Connect Release Notes Release 2.2.0 February 23, 2017 100 Innovative Way- Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com Copyright The information contained herein is subject
More informationPlexxi Control Installation, Upgrade and Administration Guide Releases 2.3.x, 2.4.x, 3.0.x, 3.1.0
Plexxi Control Installation, Upgrade and Administration Guide Releases 2.3.x, 2.4.x, 3.0.x, 3.1.0 702-20002-10 Rev 2.0 March 31, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX
More informationPlexxi Control Installation, Upgrade and Administration Guide Releases 2.3.x, 2.4.x, 3.0.x, 3.1.0
Plexxi Control Installation, Upgrade and Administration Guide Releases 2.3.x, 2.4.x, 3.0.x, 3.1.0 702-20002-10 Rev 2.2 May 16, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX
More informationPlexxi Release Notes Plexxi Switch and Control Release 3.1.1
Plexxi Release Notes Plexxi Switch and Control Release 3.1.1 May 31, 2017 100 Innovative Way- Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com Copyright The information contained
More informationQuick Start Guide. Neverfail HybriStor v2.3 on VMware Appliance
Quick Start Guide For HybriStor v2.3 on VMware Appliance, LLC has taken all reasonable care to ensure the information in this document is accurate at the date of publication. In relation to any information
More informationPlexxi HCN Plexxi Getting Started Guide Small and Medium Deployments Releases: Switch-Control 3.2.0/1 and Connect 2.3.x
Plexxi HCN Plexxi Getting Started Guide Small and Medium Deployments Releases: Switch-Control 3.2.0/1 and Connect 2.3.x Document V 2 December 1, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel.
More informationPlexxi HCN Compatibility Matrix
Plexxi HCN Compatibility Matrix Document Version 9.1 December 15, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com Legal Notices The information contained
More informationVMware ESX ESXi and vsphere. Installation Guide
VMware ESX ESXi and vsphere Installation Guide UPDATED: 28 March 2018 Copyright Notices Copyright 2002-2018 KEMP Technologies, Inc. All rights reserved. KEMP Technologies and the KEMP Technologies logo
More informationProduct Version 1.1 Document Version 1.0-A
VidyoDashboard Installation Guide Product Version 1.1 Document Version 1.0-A Table of Contents 1. Overview... 3 About This Guide... 3 Prerequisites... 3... 5 Installing the OVA for VMware ESXi... 5 Configuring
More informationPlexxi Getting Started Guide Small and Medium Deployments
Plexxi Getting Started Guide Small and Medium Deployments Releases: SC_3.2.x and CN_2.3.x July 12, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com Notices
More informationInstalling Cisco MSE in a VMware Virtual Machine
Installing Cisco MSE in a VMware Virtual Machine This chapter describes how to install and deploy a Cisco Mobility Services Engine (MSE) virtual appliance. Cisco MSE is a prebuilt software solution that
More informationBasic Configuration Installation Guide
EMC RecoverPoint for VMs 5.0 Basic Configuration Installation Guide P/N 302-003-534 REV 01 December 7, 2016 This document contains information on these topics: Revision History... 2 Overview... 3 Reference
More informationOneSign Virtual Appliance Guide
OneSign Virtual Appliance Guide A OneSign Virtual Appliance is a self-contained software implementation of the OneSign server that is functionally equivalent to a OneSign hardware appliance. You host and
More informationReset the Admin Password with the ExtraHop Rescue CD
Reset the Admin Password with the ExtraHop Rescue CD Published: 2018-01-19 This guide explains how to reset the administration password on physical and virtual ExtraHop appliances with the ExtraHop Rescue
More informationDeploy the ExtraHop Discover Appliance with VMware
Deploy the ExtraHop Discover Appliance with VMware Published: 2018-07-17 The ExtraHop virtual appliance can help you to monitor the performance of your applications across internal networks, the public
More informationDeploying Cisco UCS Central
This chapter includes the following sections: Obtaining the Cisco UCS Central Software from Cisco, page 1 Using the Cisco UCS Central OVA File, page 2 Using the Cisco UCS Central ISO File, page 4 Logging
More informationHow to Deploy a Barracuda NG Vx using Barracuda NG Install on a VMware Hypervisor
How to Deploy a Barracuda NG Vx using Barracuda NG Install on a VMware Hypervisor The OVA package uses a default configuration that may not be suitable for your deployment. If you want to use multiple
More informationInstallation of Cisco Business Edition 6000H/M
Installation Overview, page 1 Installation Task Flow of Cisco Business Edition 6000H/M, page 2 Installation Overview This chapter describes the tasks that you must perform to install software on your Business
More informationRecoverPoint for Virtual Machines
RecoverPoint for Virtual Machines Basic Configuration Installation Guide P/N 302-004-369 Rev 01 Version 5.1.1 RecoverPoint for Virtual Machines Version 5.1.1 Basic Configuration Installation Guide Copyright
More informationInstalling Cisco Virtual Switch Update Manager
This chapter contains the following sections: Information About Cisco Virtual Switch Update Manager, page 1 Compatibility Information for Cisco Virtual Switch Update Manager, page 1 System Requirements
More informationVirtual Appliance User s Guide
Cast Iron Integration Appliance Virtual Appliance User s Guide Version 4.5 July 2009 Cast Iron Virtual Appliance User s Guide Version 4.5 July 2009 Copyright 2009 Cast Iron Systems. All rights reserved.
More informationInstalling Cisco WebEx Social
CHAPTER 2 This chapter describes how to install Cisco WebEx Social. This chapter includes these topics: Before You Begin, page 2-1 3.1, page 2-1 Before You Begin Before you begin installation, review the
More informationInstalling the Cisco Nexus 1000V Software Using ISO or OVA Files
Installing the Cisco Nexus 1000V Software Using ISO or OVA Files This chapter contains the following sections: Installing the VSM Software, page 1 Installing the VSM Software Installing the Software from
More informationDell Storage Compellent Integration Tools for VMware
Dell Storage Compellent Integration Tools for VMware Version 4.0 Administrator s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your
More informationKEMP360 Central - VMware vsphere. KEMP360 Central using VMware vsphere. Installation Guide
KEMP360 Central using VMware vsphere Installation Guide VERSION: 5.0 UPDATED: JUNE 2016 Table of Contents 1 Introduction... 3 1.1 Document Purpose... 3 1.2 Intended Audience... 3 Prerequisites... 3 2 Installing
More informationPlexxi Release Notes Release 3.1.0
Plexxi Release Notes Release 3.1.0 March 31, 2017 100 Innovative Way- Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com Copyright The information contained herein is subject to change
More informationDeploying the Cisco Tetration Analytics Virtual
Deploying the Cisco Tetration Analytics Virtual Appliance in the VMware ESXi Environment About, on page 1 Prerequisites for Deploying the Cisco Tetration Analytics Virtual Appliance in the VMware ESXi
More informationSonicWall Secure Mobile Access SMA 500v Virtual Appliance 8.6. Getting Started Guide
SonicWall Secure Mobile Access SMA 500v Virtual Appliance 8.6 Getting Started Guide Copyright 2017 SonicWall Inc. All rights reserved. SonicWall is a trademark or registered trademark of SonicWall Inc.
More informationdctrack Quick Setup Guide (Recommended) Obtain a dctrack Support Website Username and Password
dctrack 5.0.0 Quick Setup Guide This guide walks you through installing dctrack for the first time. In other words, this is a clean install - it is not an integration of dctrack and Power IQ, and it is
More informationBasic Configuration Installation Guide
RecoverPoint for VMs 5.1 Basic Configuration Installation Guide P/N 302-003-975 REV 1 July 4, 2017 This document contains information on these topics: Revision History... 2 Overview... 3 Reference architecture...
More informationInstalling Cisco CMX in a VMware Virtual Machine
Installing Cisco CMX in a VMware Virtual Machine This chapter describes how to install and deploy a Cisco Mobility Services Engine (CMX) virtual appliance. Cisco CMX is a prebuilt software solution that
More informationCisco Modeling Labs OVA Installation
Prepare for an OVA File Installation, page 1 Download the Cisco Modeling Labs OVA File, page 2 Configure Security and Network Settings, page 2 Deploy the Cisco Modeling Labs OVA, page 12 Edit the Virtual
More informationHiveManager Virtual Appliance QuickStart
This QuickStart describes the installation of a HiveManager Virtual Appliance. Introduction to HiveManager Virtual Appliance Before you can install the HiveManager Virtual Appliance, you must first install
More informationUsing a Virtual Machine for Cisco IPICS on a Cisco UCS C-Series Server
CHAPTER7 Using a Virtual Machine for Cisco IPICS on a Cisco UCS C-Series Server This chapter describes how to configure a virtual machine (VM) on a Cisco UCS C-Series server. You can install and operate
More informationECDS MDE 100XVB Installation Guide on ISR G2 UCS-E and VMWare vsphere Hypervisor (ESXi)
ECDS MDE 100XVB Installation Guide on ISR G2 UCS-E and VMWare vsphere Hypervisor (ESXi) Revised: November, 2013 Contents Overview, page 1 Guidelines and Limitations, page 1 Prerequisites, page 2 Installation
More informationCisco VVB Installation
System Requirements, on page 1 Create VM for Cisco VVB, on page 2 Create a Virtual Machine from the OVA, on page 2 Configure DNS Server, on page 3 Mount ISO Files, on page 3 Install Cisco VVB, on page
More informationISO Installation Guide. Version 1.2 December 2015
Version 1.2 December 2015 ISO Installation Guide Copyright 2015 iwebgate. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
More informationJuniper Secure Analytics Virtual Appliance Installation Guide
Juniper Secure Analytics Virtual Appliance Installation Guide Release 7.3.0 Modified: 2017-09- Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, California 9089 USA 08-75-2000 www.juniper.net Copyright
More informationSteelCentral AppResponse 11 Virtual Edition Installation Guide
SteelCentral AppResponse 11 Virtual Edition Installation Guide Virtual Edition for VMware ESXi 5.5 and ESXi 6.0 Version 11.0 November 2016 2016 Riverbed Technology. All rights reserved. Riverbed, SteelApp,
More informationInstalling the Cisco Virtual Network Management Center
CHAPTER 4 Installing the Cisco Virtual Network Management Center This chapter provides procedures for installing the Cisco Virtual Network Management Center (VNMC). This chapter includes the following
More informationCisco Business Edition 7000 Installation Guide, Release 10.6
First Published: July 08, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text
More informationdctrack Quick Setup Guide Virtual Machine Requirements Requirements Requirements Preparing to Install dctrack
dctrack Quick Setup Guide This Quick Setup Guide explains how to install and configure dctrack. For additional information on any aspect of dctrack, see the accompanying dctrack Help in other its online
More informationVideoscape Distribution Suite Software Installation Guide
First Published: August 06, 2012 Last Modified: September 03, 2012 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800
More informationDell Storage Integration Tools for VMware
Dell Storage Integration Tools for VMware Version 4.1 Administrator s Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION:
More informationVMware Skyline Collector Installation and Configuration Guide. VMware Skyline 1.4
VMware Skyline Collector Installation and Configuration Guide VMware Skyline 1.4 You can find the most up-to-date technical documentation on the VMware website at: https://docs.vmware.com/ If you have
More informationActive Fabric Manager Installation Guide 1.5
Active Fabric Manager Installation Guide 1.5 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either
More informationSRA Virtual Appliance Getting Started Guide
SRA Virtual Appliance Getting Started Guide 1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your system. CAUTION: A CAUTION indicates potential
More informationDeploy the ExtraHop Discover Appliance with VMware
Deploy the ExtraHop Discover Appliance with VMware Published: 2018-09-26 Published: 2018-09-26 The ExtraHop virtual appliance can help you to monitor the performance of your applications across internal
More informationvrealize Suite Lifecycle Manager 1.0 Installation and Management vrealize Suite 2017
vrealize Suite Lifecycle Manager 1.0 Installation and Management vrealize Suite 2017 vrealize Suite Lifecycle Manager 1.0 Installation and Management You can find the most up-to-date technical documentation
More informationGX-V. Quick Start Guide. VMware vsphere / vsphere Hypervisor. Before You Begin SUMMARY OF TASKS WORKSHEET
Quick Start Guide If you re not using VMware vsphere Client 4.0, your screens may vary. GX-V VIRTUAL GMS SERVER VMware vsphere / vsphere Hypervisor 2012 Silver Peak Systems, Inc. Before You Begin Comply
More informationInstalling and Upgrading Cisco Network Registrar Virtual Appliance
CHAPTER 3 Installing and Upgrading Cisco Network Registrar Virtual Appliance The Cisco Network Registrar virtual appliance includes all the functionality available in a version of Cisco Network Registrar
More informationVMware vfabric Data Director Installation Guide
VMware vfabric Data Director Installation Guide vfabric Data Director 1.0.1 This document supports the version of each product listed and supports all subsequent versions until the document is replaced
More informationTrend Micro Incorporated reserves the right to make changes to this document and to the product described herein without notice. Before installing and using the product, please review the readme files,
More informationTrend Micro Incorporated reserves the right to make changes to this document and to the product described herein without notice. Before installing and using the product, please review the readme files,
More informationCisco VDS Service Broker Software Installation Guide for UCS Platforms
Cisco VDS Service Broker 1.0.1 Software Installation Guide for UCS Platforms Revised: May 2013 This document provides detailed instructions for installing the Cisco Videoscape Distribution Suite Service
More informationHyTrust CloudControl Installation Guide
HyTrust CloudControl Installation Guide Version 4.5 August, 2015 Use, reproduction, or disclosure is subject to restrictions set forth in Contract Number 2009*0674524*000 and Sub Contract No. HyTrust 01.
More informationCA Agile Central Administrator Guide. CA Agile Central On-Premises
CA Agile Central Administrator Guide CA Agile Central On-Premises 2018.1 Table of Contents Overview... 3 Server Requirements...3 Browser Requirements...3 Access Help and WSAPI...4 Time Zone...5 Architectural
More informationPlexxi HCN Plexxi Control High Availability Installation, Upgrade and Administration Guide Release 4.0.0
Plexxi HCN Plexxi Control High Availability Installation, Upgrade and Administration Guide Release 4.0.0 May 3, 2018 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com
More informationUsing vrealize Operations Tenant App as a Service Provider
Using vrealize Operations Tenant App as a Service Provider Using vrealize Operations Tenant App as a Service Provider You can find the most up-to-date technical documentation on the VMware Web site at:
More informationCisco Prime Collaboration Deployment
Install System Requirements for Installation, page 1 Browser Requirements, page 2 IP Address Requirements, page 2 Virtualization Software License Types, page 3 Frequently Asked Questions About the Installation,
More informationIronKey EMS On-Prem 7.1 Quick Start Guide
IronKey EMS On-Prem 7.1 Quick Start Guide Last Updated June 2017 System Requirements Requirement Description Database Microsoft SQL Server 2005, Microsoft SQL Server 2008, or Microsoft SQL Server 2012,
More informationQuick Start Guide ViPR Controller & ViPR SolutionPack
ViPR Quick Start Guide Quick Start Guide ViPR Controller & ViPR SolutionPack Abstract This is a Quick Start Guide containing the main installation steps for the ViPR Controller and ViPR SolutionPack. For
More informationQuick Start Guide ViPR Controller & ViPR SolutionPack
ViPR Quick Start Guide Quick Start Guide ViPR Controller & ViPR SolutionPack Abstract This is a Quick Start Guide containing the main installation steps for the ViPR Controller and ViPR SolutionPack. For
More informationCisco Mobility Services Engine Virtual Appliance Installation Guide
Cisco Mobility Services Engine Virtual Appliance Installation Guide for Cisco CMX Release, 10.3 and Later First Published: 2017-04-02 Last Modified: 2017-06-18 Americas Headquarters Cisco Systems, Inc.
More informationKEMP 360 Central for vsphere. Installation Guide
KEMP 360 Central for vsphere Installation Guide UPDATED: 09 October 2018 Copyright Notices Copyright 2002-2018 KEMP Technologies, Inc. All rights reserved. KEMP Technologies and the KEMP Technologies logo
More informationInstallation Guide for Cisco Business Edition 6000S
First Published: November 16, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883
More informationUDP Director Virtual Edition Installation and Configuration Guide (for Stealthwatch System v6.9.0)
UDP Director Virtual Edition Installation and Configuration Guide (for Stealthwatch System v6.9.0) Installation and Configuration Guide: UDP Director VE v6.9.0 2016 Cisco Systems, Inc. All rights reserved.
More informationIf you re not using VMware vsphere Client 4.1, your screens may vary. ITEM Example s Values Your Values
Quick Start Guide If you re not using VMware vsphere Client 4.1, your screens may vary. VXOA VIRTUAL APPLIANCES VMware vsphere / vsphere Hypervisor In-Line Deployment (Bridge Mode) 2012 Silver Peak Systems,
More informationInstalling and Configuring vcenter Support Assistant
Installing and Configuring vcenter Support Assistant vcenter Support Assistant 6.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced
More informationIronKey EMS Quick Start Guide. version 7.2 DataLocker Inc. June, 2018
IronKey EMS Quick Start Guide version 7.2 DataLocker Inc. June, 2018 1 System Requirements Requirement Description Database Microsoft SQL Server 2005, Microsoft SQL Server 2008, Microsoft SQL Server 2012,
More informationBoot Attestation Service 3.0.0
Product Guide Boot Attestation Service 3.0.0 For use with epolicy Orchestrator 4.6.0, 5.0.0 Software COPYRIGHT Copyright 2013 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee,
More informationVMware vfabric Data Director Installation Guide
VMware vfabric Data Director Installation Guide vfabric Data Director 2.5 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by
More informationHow to Deploy Axon on VMware vcenter
How to Deploy Axon on VMware vcenter Copyright Informatica LLC 2017. Informatica, the Informatica logo, Intelligent Data Lake, Big Data Mangement, and Live Data Map are trademarks or registered trademarks
More informationHP LeftHand SAN Solutions
HP LeftHand SAN Solutions Support Document Installation Manuals VSA 8.0 Quick Start - Demo Version Legal Notices Warranty The only warranties for HP products and services are set forth in the express warranty
More informationInstalling and Configuring vcloud Connector
Installing and Configuring vcloud Connector vcloud Connector 2.6.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new
More informationCisco Mobility Services Engine Virtual Appliance Installation Guide for Cisco CMX Release 10.4
Cisco Mobility Services Engine Virtual Appliance Installation Guide for Cisco CMX Release 10.4 First Published: 2017-04-02 Last Modified: 2017-06-27 Americas Headquarters Cisco Systems, Inc. 170 West Tasman
More informationQuest VROOM Quick Setup Guide for Quest Rapid Recovery for Windows and Quest Foglight vapp Installers
Quest VROOM Quick Setup Guide for Quest Rapid Recovery for Windows and Quest Foglight vapp Installers INTRODUCTION Setup of Quest VROOM requires installation of Rapid Recovery and Foglight for Virtualization
More informationOpenManage Integration for VMware vcenter Quick Installation Guide for vsphere Web Client Version 3.2
OpenManage Integration for VMware vcenter Quick Installation Guide for vsphere Web Client Version 3.2 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better
More informationBIG-IP Virtual Edition and VMware ESXi: Setup. Version 12.1
BIG-IP Virtual Edition and VMware ESXi: Setup Version 12.1 Table of Contents Table of Contents Getting Started with BIG-IP Virtual Edition on ESXi...5 Steps to deploy BIG-IP VE...5 Prerequisites for BIG-IP
More informationHorizon DaaS Platform 6.1 Service Provider Installation - vcloud
Horizon DaaS Platform 6.1 Service Provider Installation - vcloud This guide provides information on how to install and configure the DaaS platform Service Provider appliances using vcloud discovery of
More informationConfiguring the SMA 500v Virtual Appliance
Using the SMA 500v Virtual Appliance Configuring the SMA 500v Virtual Appliance Registering Your Appliance Using the 30-day Trial Version Upgrading Your Appliance Configuring the SMA 500v Virtual Appliance
More informationFileCruiser VM Quick Configuration Guide For Trial Version V1.0
FileCruiser VM Quick Configuration Guide For Trial Version V1.0 Contents How to configure FileCruiser VM... 4 Setup Wizard: Time Zone page... 6 Setup Wizard: Network page... 7 Setup Wizard: Service Server
More informationQuest VROOM Quick Setup Guide for Quest Rapid Recovery for Windows and Quest Foglight vapp Installers
Quest VROOM Quick Setup Guide for Quest Rapid Recovery for Windows and Quest Foglight vapp Installers INTRODUCTION Setup of Quest VROOM requires installation of Rapid Recovery and Foglight for Virtualization
More informationakkadian Global Directory 3.0 System Administration Guide
akkadian Global Directory 3.0 System Administration Guide Updated July 19 th, 2016 Copyright and Trademarks: I. Copyright: This website and its content is copyright 2014 Akkadian Labs. All rights reserved.
More informationHyTrust Appliance Installation Guide
HyTrust Appliance Installation Guide Version 3.0.2 October, 2012 HyTrust Appliance Installation Guide Copyright 2009-2012 HyTrust Inc. All Rights Reserved. HyTrust, Virtualization Under Control and other
More informationDeploy the ExtraHop Trace Appliance with VMware
Deploy the ExtraHop Trace Appliance with VMware Published: 2018-12-14 This guide explains how to deploy the virtual ExtraHop Trace appliances (ETA 1150v and ETA 6150v) on the VMware ESXi/ESX platform.
More informationLog & Event Manager UPGRADE GUIDE. Version Last Updated: Thursday, May 25, 2017
UPGRADE GUIDE Log & Event Manager Version 6.3.1 Last Updated: Thursday, May 25, 2017 Retrieve the latest version from: https://support.solarwinds.com/success_center/log_event_manager_(lem)/lem_documentation
More informationCisco Business Edition 6000 Installation Guide, Release 10.0(1)
First Published: January 15, 2014 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883
More informationGetting Started with ESX Server 3i Installable Update 2 and later for ESX Server 3i version 3.5 Installable and VirtualCenter 2.5
Getting Started with ESX Server 3i Installable Update 2 and later for ESX Server 3i version 3.5 Installable and VirtualCenter 2.5 Getting Started with ESX Server 3i Installable Revision: 20090313 Item:
More informationDell Storage Compellent Integration Tools for VMware
Dell Storage Compellent Integration Tools for VMware Administrator s Guide Version 3.1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your
More informationOpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1
OpenManage Integration for VMware vcenter Quick Install Guide for vsphere Client, Version 2.3.1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use
More informationQUICK START GUIDE Cisco Physical Access Manager Quick Start Guide, Release 1.4.1
QUICK START GUIDE Cisco Physical Access Manager Quick Start Guide, Release 1.4.1 1 Before You Begin 2 Installing the Appliance 3 Logging In to the Cisco Physical Access Manager 4 Entering the Initial Configuration
More informationF5 iworkflow and Citrix XenServer: Setup. Version 2.0.1
F5 iworkflow and Citrix XenServer: Setup Version 2.0.1 Table of Contents Table of Contents Getting Started with iworkflow Virtual Edition... 5 What is iworkflow Virtual Edition?... 5 About iworkflow VE
More informationInstall and Configure FindIT Network Manager and FindIT Network Probe on a VMware Virtual Machine
Install and Configure FindIT Network Manager and FindIT Network Probe on a VMware Virtual Machine Objective The Cisco FindIT Network Management provides tools that help you easily monitor, manage, and
More informationRedhat OpenStack 5.0 and PLUMgrid OpenStack Networking Suite 2.0 Installation Hands-on lab guide
Redhat OpenStack 5.0 and PLUMgrid OpenStack Networking Suite 2.0 Installation Hands-on lab guide Oded Nahum Principal Systems Engineer PLUMgrid EMEA November 2014 Page 1 Page 2 Table of Contents Table
More informationQuick Start Guide for Vmware. Version 2.5 Vmware vsphere Instance
Quick Start Guide for Vmware Version 2.5 Vmware vsphere Instance CONTENTS 1. Introduction 1.1 Running Gemini appliance on Vmware vsphere 1.1.1 Supported Versions 1.1.2 System Requirement 1.1.3 Note on
More informationon VMware Deployment Guide November 2018 Deployment Guide for Unitrends Free on VMware Release 10.3 Version Provide feedback
Deployment Guide November 2018 Release 10.3 Version 1.11152018 2 Copyright Copyright 2018 Unitrends Incorporated. All rights reserved. Content in this publication is copyright material and may not be copied
More information