ACSUS-11. Access Cabinet Systems Cabinets & Accessories

Transcription

1 ACSUS-11 Access Cabinet Systems Cabinets & Accessories

2 The cabinet has in the past been considered to be just a metal box, simply providing a mounting structure into which both active and passive equipment is mounted. However, today the cabinet provides a level of system security, as well as being an integral part of achieving optimal system operating efficiency. It is important to configure the cabinet to match the operational demands of the equipment housed inside. By doing so, it helps decrease operational costs, and helps avoid any potential threat of premature system failure. Each Access Cabinet features a tubular frame top and bottom connected centrally on each side, with structural vertical members providing a center frame configuration. This design allows unhindered 180 degree clearance around the front and rear mounting angles, while offering clear access to the internal cabinet envelope. The design is crucial in allowing installation and maintenance to be carried out in a far more efficient manner, which ultimately provides the tool to reduce the total cost of ownership during the lifetime of the cabinet. With a wide range of cabinets available, the customer now has the ability to construct a diverse range of internal configurations which allows both existing and next generation network components to be housed, irrespective of their mounting requirements. Cooper B-Line s Access Cabinet System, the original corner-less cabinet, has been developed and enhanced with the goal of providing the ultimate communication and data cabinet solution. Designed from the frame up, the Access Cabinet System has evolved with application excellence and user friendliness in mind. The Access Cabinet platform truly provides a modular cabinet solution designed to grow with evolving system demands. Fully adjustable 19-inch rails 31.5 (800mm) wide cabinet offer 23-inch mounting options Square hole or #12-24 tapped hole mounting rail options Fully configurable top panel options Extensive range of single and double door options with a variety of locking choices Simple ganging facility through vertical center members top and bottom Doors can be configured left hand (LH) or right hand (RH) hinged in the factory or in the field 2-point locking door with key, mechanical combination and electronic locking options Split hinged side panels for easy handling. Available in plain or vented steel on selected cabinet sizes. Quick release hinging on doors & side panels Open base with infill panel options Wide range of base mounting options including leveling feet and castors

3 Table of Contents Flexibility By Design Introduction Access Design Features Network Cabinet Active Cabinet Advanced Management Distribution Frame Co-Locate / Multi-Housing Cabinet into 2 Cabinet High Density Copper Cabling Cabinet High Density Fibre Cabling Cabinet Aisle Containment (Features, Benefits, Specifications) Aisle Containment (Accessories) Dynamic Part Numbering Configurator Step 1 - Frame Configuration Step 2 - Door Configuration Step 3 - Side Panel Configuration Step 4 - Top Panel Configuration Step 5 - Color Options Step 6 - Packaging Options Configurating A Cabinet For Thermal Loads Thermal Configuration Components Component Assembly Specs & Part Numbers Frames Mounting Angle Options Base Mounting & Panel Options Blanking Panels Top Panel Options Side Panel Options Trim & Door Options Shelf Options & Compatibility Matrix Vertical Cable Management Accessories Horizontal Cable Management Accessories Access Cabinet Components Cable Ties, Blanking Panels Vertical Baffles Fan Units Earth Kits & Earth Bars U Height Labels & Bolt Through Kits i-pal, i-box, & i-pdu System Accessories Technical Specifications Access Configurator Information

4 Flexibility By Design Modular solutions designed to grow with demand Network Cabinet pages 6 & 7 Active Cabinet pages 8 & 9 Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim High Density Fiber Cabling Cabinet pages 18 & 19 2

5 Flexibility By Design AMDF Cabinet pages 10 & 11 Co-Locate Cabinet pages 12 & 13 Aisle Containment pages High Density Copper Cabling Cabinet pages 16 & 17 3 into 2 Cabinet pages 14 & 15 3

6 Introduction The cabinet has, in the past, been considered to be just a metal box, providing the mounting structure into which the interesting, expensive equipment was mounted. Nowadays, however, the cabinet is performing an increasingly important role, not only having to house a number of different technologies but also providing a framework to allow individual installations to be tailored to best match the constraints and demands encountered. The form and function of the cabinet structure can complement the operational efficiency of an installation given some consideration and forethought. Equally, failure to understand and address potential issues, can lead to increased operational costs as well as the threat or premature system failure. Cooper B-Line s Access Cabinet System, the original corner-less cabinet, has been developed and enhanced with the goal of providing the ultimate cabinet solution. Designed from the frame up, the Access Cabinet System has evolved with application excellence and ease of use in mind. Each Access Cabinet solution is based on the same cantilever frame concept using a tubular frame top and bottom connected by central extrusions. This design allows unhindered 180 degree clearance around the front and rear mounting angles while at the same time offering clear access to the internet cabinet envelope. This crucially allows installation and maintenance to be carried out in a far more efficient manner and ultimately provides the tool to reduce the total cost of ownership during the lifetime of the cabinet. The wide range of cabinet sizes offered provides the ability to construct a diverse range of internal configurations, allowing both existing and next generation network components to be housed, irrespective of their mounting requirements. Unique So what makes Access so different from conventional cabinets? The unique construction, open architecture without corner posts, enables the quick removal of all panels/doors to completely expose the open frame for installation of cables and/or equipment. Far neater, faster and user friendly cable installations are possible compared with conventional cabinets. The resultant installation is much easier to maintain with ready access to equipment and the avoidance of messy, un-workable cabling arrangements. Effective The Access cabinet open frame structure provides virtually 360 total accessibility, prior to fitting panels and doors, which gives installers maximum working access and the opportunity to greatly improve installation times. The elimination of corner posts also removes the need to excessively inset 19-inch mounting angles, achieving maximum equipment and working space. Flexible The number of cabinet combinations available further enhances the strength of the Access design from door options to top panels. Access achieves an unparalleled level of flexibility, providing the end user with the right cabinet for the right application. Technology IT systems continue to be at the cutting edge as businesses search to develop a competitive advantage. The streaming of business processes leading to improved efficiencies, together with the desire for real-time business reporting, are two aspects that are at the forefront of current demands. Couple the increasing demands from business with the adoption of data-rich applications by the masses, and the demand for increased IT capacity seems set to continue for the foreseeable future. Applications Users continue to crave improvements in computing capacity, driving chip manufacturers to develop quicker processors, with new models launched every two or three years. Typically these developments have seen processors halving in size, effectively doubling the computing capacity for a given envelope size. Developments, however, are not limited to the action components. Cabling infrastructure solutions have also developed, and, just like the active components new challenges are generated when these are deployed. Space Businesses need to maximize any return on investment. Consequently, space utilization, or the need to work within a space constraint, can impact significantly on a system s design and capability. In a number of geographical regions these factors look to continue to gain in importance, with the growing cost and limited availability of suitable real estate. Power Power costs and supply demands seem set to continue to increase year upon year. The improvements to computing densities, coupled with the demand for system resilience, have led to a demand for higher power supply densities as equipment manufacturers build in power supply redundancy. The improvements in computing density also generate the need to manage and dissipate increasing thermal loads produced by the equipment. Resilience Any system or process is only as strong as its weakest link. The development of any system is measured in terms of return on investment, which is indelibly linked to system availability. System expectations nowadays are for 99.9% + availability. Clearly, in order to achieve such levels of service, it is imperative that redundancy or back up processes are accommodated in the design. 4

7 Access Design Features 1 Open frame structure providing optimal access configurability Bolt together construction lbs. (1,000kg) load rating NEMA / IP20 environmental rating Available assembled or flat packed* Quick to assemble and easy to adjust * Flat packed subject to additional charge Extensive range of cabinet size options** Standard heights ranging from 22U to 47U Width including 23.6 (600mm) 27.6 (700mm) 31.5 (800mm) Depths from 26.5 (675mm) to 55.1 (1400mm) 5 Mounting technologies including Option of either #12-24 pre-tapped or square pierced rails Configured 19-inch*** Full width rails*** ETSI rails Configured with RCM management fingers *** Only available on 31.5 (800mm) wide cabinets 6 Configurable top panel options Range of plain, vented, cable entry, fan tray and cable channel options Configurable into any order ** Please contact customer services for availability of stocked sizes and lead time confirmation 2 Door Features Quick release hinges Configurable left or right hinged Secure locking options Single and double door options Earth bonding options Cabinet security options Two point espan locking as standard with keyed alike locks Individually keyed locking (option) Mechanical combination locking (option) Stand alone intelligent electronic locking (option) Network configurable intelligent electronic locking (option) Side Panel Features Standard split half depth construction Easier handling Quick release hinges Secure (internal access required to open) Earth bonding facility 4 Range of base blanking and cabinet mounting options 3 Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Standard Color options Default finish is black with black trim. Hardware and mouldings are available in Black or Blue as standard Panels available in Black or Light Gray as standard with other panel color options available on request subject to MOQs and lead times 5

8 Network Cabinet Introduction Most day to day networking installations incorporating low density active equipment or cabling applications, can be accommodated into what has evolved to be the industry standard networking cabinet. Details of the standard Access Network Enclosure are shown below. In the event of this standard specification not meeting the needs of a specific application then, thanks to Access s modular design, each cabinet can be configured using the simple dynamic part number shown on page 25. Further details on custom cabinet specification can also be found on pages 26 to 55. Standard Access Network Enclosure Each cabinet comprises of the following: Access Cabinet base frame mounted on Nylon feet Supplied with two pairs of fully adjustable, 19-inch mounting angles Glass door with vented styles fitted at the front Plain steel door fitted at the rear Plain Side Panels fitted both sides Top panel configuration comprising of: - One vented panel fitted at the rear - Remaining top panel opening fitted with plain panels Standard Finish: Black with Black Trim - RAL 9005 Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 23.6 inch (600mm) Wide Cabinet Part Number Part Number Effective Height Width Depth (Assembled) (Flat Packed) U in. (mm) in. (mm) in. (mm) A2266C1CGSPPNVB A2266C1CGSPPNVBK 26.6 (675) A2269C1CGSPPXVB A2269C1CGSPPXVBK (1111) 23.6 (600) 36.0 (915) A2261C1CGSPPPVB A2261C1CGSPPPVBK 39.4 (1000) A2766C1CGSPPNVB A2766C1CGSPPNVBK 26.6 (675) A2769C1CGSPPXVB A2769C1CGSPPXVBK (1333) 23.6 (600) 36.0 (915) A2761C1CGSPPPVB A2761C1CGSPPPVBK 39.4 (1000) A3966C1CGSPPNVB A3966C1CGSPPNVBK 26.6 (675) A3969C1CGSPPXVB A3969C1CGSPPXVBK (1867) 23.6 (600) 36.0 (915) A3961C1CGSPPPVB A3961C1CGSPPPVBK 39.4 (1000) A4266C1CGSPPNVB A4266C1CGSPPNVBK 26.6 (675) A4269C1CGSPPXVB A4269C1CGSPPXVBK (2000) 23.6 (600) 36.0 (915) A4261C1CGSPPPVB A4261C1CGSPPPVBK 39.4 (1000) A4766C1CGSPPNVB A4766C1CGSPPNVBK 26.6 (675) A4769C1CGSPPXVB A4769C1CGSPPXVBK (2222) 23.6 (600) 36.0 (915) A4761C1CGSPPPVB A4761C1CGSPPPVBK 39.4 (1000) 6

9 Network Cabinet Option Overview Five standard heights with other heights available (subject to order) up to a maximum of 52U Two standard widths of 23.6 (600mm) and 31.5 (800mm) Other options including 27.6 (700mm) wide assemblies are available subject to order Three standard depth options including 26.6 (675mm), 36.0 (915mm) and 39.4 (1000mm) Other depth options available to order up to a maximum of 55.1 (1400mm) Finish Options (see page 33) Cooper B-Line s Access cabinet is available in a range of standard quick delivery color options as follows; Black with Black Trim Color Ref. B (default) Light Gray with Blue Trim Color Ref. A Other standard or custom color options are also available subject to minimum order quantities and lead times Light Gray with Black Trim Color Ref. C Black with Blue Trim Color Ref. D Light Gray with Mid Gray Trim Color Ref. G Accessories A comprehensive range of accessories are available to suit every application. Details of specific items can be found on the pages indicated below; Cabinet Cladding Enhancements..... Pages Cabinet Floor Mounting Options Pages Base Cable Entry Pages Roof Cable Entry Page 46 Vertical Cable Management Pages 40, Horizontal Cable Management Pages Rack Mounted Thermal Management Pages In Cabinet Air Management Pages Fixed & Sliding Shelf Options Pages Bolt Together/Ganging Options Page 85 Earthing Accessories Pages Access Control Pages Environmental Monitoring Pages (800mm) Wide Cabinet Part Number Part Number Effective Height Width Depth (Assembled) (Flat Packed) U in. (mm) in. (mm) in. (mm) A2286C1CGSPPNVB A2286C1CGSPPNVBK 26.6 (675) A2289C1CGSPPXVB A2289C1CGSPPXVBK (1111) 31.5 (800) 36.0 (915) A2281C1CGSPPPVB A2281C1CGSPPPVBK 39.4 (1000) A2786C1CGSPPNVB A2786C1CGSPPNVBK 26.6 (675) A2789C1CGSPPXVB A2789C1CGSPPXVBK (1333) 31.5 (800) 36.0 (915) A2781C1CGSPPPVB A2781C1CGSPPPVBK 39.4 (1000) A3986C1CGSPPNVB A3986C1CGSPPNVBK 26.6 (675) A3989C1CGSPPXVB A3989C1CGSPPXVBK (1867) 31.5 (800) 36.0 (915) A3981C1CGSPPPVB A3981C1CGSPPPVBK 39.4 (1000) A4286C1CGSPPNVB A4286C1CGSPPNVBK 26.6 (675) A4289C1CGSPPXVB A4289C1CGSPPXVBK (2000) 31.5 (800) 36.0 (915) A4281C1CGSPPPVB A4281C1CGSPPPVBK 39.4 (1000) A4786C1CGSPPNVB A4786C1CGSPPNVBK 26.6 (675) A4789C1CGSPPXVB A4789C1CGSPPXVBK (2222) 31.5 (800) 36.0 (915) A4781C1CGSPPPVB A4781C1CGSPPPVBK 39.4 (1000) 7

10 Active Cabinet Introduction Just about any network component that consumes electricity needs to be managed thermally to operate efficiently. Managing these active components within a secure cabinet environment can be challenging, given that different components are designed to be cooled in different ways and can vary significantly in size and weight. Probably the only commonality between them is that usually, but not always, they have been designed to be 19 (482mm) mounted. To help simplify the configuration process, Cooper B-Line has developed a range of modular tools to cope with widely differing demands. The core of the solution is a standard Access Active Cabinet configuration, which, like every other Access cabinet, can be easily reconfigured to provide an optimized solution (see the dynamic part number matrix on page 25). Basic Active Equipment Enclosure Access Cabinet base frame mounted on Nylon feet Supplied with two pairs of fully adjustable 19-inch mounting angles Vented steel front door (80% free area ventilation pattern) Plain side panels fitted both sides Top panel configuration comprising of; - One vented panel fitted at rear - The remaining top panel opening fitted with plain infill panels Standard Finish: Black with Black Trim - RAL 9005 Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim A full range of modular thermal enhancements are available to optimize the deployment of installations housing both conventional server applications as well as mixed technology configurations. For further details of the range of modular thermal enhancements please refer to pages 75 to 81. 8

11 Active Cabinet Option Overview Three standard heights including 27U, 42U, & 47U Other heights available subject to order up to a maximum of 52U Two standard widths of 23.6 (600mm) and 31.5 (800mm). Other options including 27.6 (700mm) wide assemblies are available subject to order Three standard depth options including 36.0 (915mm), 39.4 (1000mm) and 47.2 (1200mm) with other depth options available to order up to a maximum of 55.1 (1400mm) Finish Options (see page 33) Cooper B-Line s Access cabinet is available in a range of standard quick delivery color options as follows; Black with Black Trim Color Ref. B (default) Light Gray with Blue Trim Color Ref. A Other standard or custom color options are also available subject to minimum order quantities and lead times Light Gray with Black Trim Color Ref. C Black with Blue Trim Color Ref. D Light Gray with Mid Gray Trim Color Ref. G Accessories A comprehensive range of accessories are available to suit every application. Details of specific items can be found on the pages indicated below; Cabinet Cladding Enhancements..... Pages Cabinet Floor Mounting Options Pages Base Cable Entry Pages Roof Cable Entry Page 46 Vertical Cable Management Pages 40, Horizontal Cable Management Pages Rack Mounted Thermal Management Pages In Cabinet Air Management Pages Fixed & Sliding Shelf Options Pages Bolt Together/Ganging Options Page 85 Earthing Accessories Pages Access Control Pages Environmental Monitoring Pages Part Number Part Number Effective Height Width Depth (Assembled) (Flat Packed) U in. (mm) in. (mm) in. (mm) A2769C1CVVPPXVB A2769C1CVVPPXVBK 36.0 (915) A2761C1CVVPPPVB A2761C1CVVPPPVBK (1333) 23.6 (600) 39.4 (1000) A2762C1CVVPPPVB A2762C1CVVPPPVBK 47.2 (1200) A4269C1CVVPPXVB A4269C1CVVPPXVBK 36.0 (915) A4261C1CVVPPPVB A4261C1CVVPPPVBK (2000) 23.6 (600) 39.4 (1000) A4262C1CVVPPPVB A4262C1CVVPPPVBK 47.2 (1200) A4769C1CVVPPXVB A4769C1CVVPPXVBK 36.0 (915) A4761C1CVVPPPVB A4761C1CVVPPPVBK (2222) 23.6 (600) 39.4 (1000) A4762C1CVVPPPVB A4762C1CVVPPPVBK 47.2 (1200) A2789C1CVVPPXVB A2789C1CVVPPXVBK 36.0 (915) A2781C1CVVPPPVB A2781C1CVVPPPVBK (1333) 31.5 (800) 39.4 (1000) A2782C1CVVPPPVB A2782C1CVVPPPVBK 47.2 (1200) A4289C1CVVPPXVB A4289C1CVVPPXVBK 36.0 (915) A4281C1CVVPPPVB A4281C1CVVPPPVBK (2000) 31.5 (800) 39.4 (1000) A4282C1CVVPPPVB A4282C1CVVPPPVBK 47.2 (1200) A4789C1CVVPPXVB A4789C1CVVPPXVBK 36.0 (915) A4781C1CVVPPPVB A4781C1CVVPPPVBK (2222) 31.5 (800) 39.4 (1000) A4782C1CVVPPPVB A4782C1CVVPPPVBK 47.2 (1200) 9

12 Advanced Managed Distribution Frame Introduction The Access AMDF frame provides the perfect platform for high density copper and fiber patching applications. Providing unrivaled accessibility, the basic frame structure can be easily and quickly adjusted as required. The front and rear mounting angles on the 36.0 (915mm) and 39.4 (1000mm) deep variants can be removed allowing 110 Style Connector Mounting Frames to be easily fitted. Advanced Managed Distribution Frame Each unit is configured as follows; Basic Access frame with openings at the top and bottom for maximum unhindered cabling access Fitted with standard corner adaptors and adjustable jacking feet Supplied with two pairs of fully adjustable, 19-inch mounting angles Each mounting angle fitted with ten off twist and lock cable management arms Standard Finish: Black with Black Trim - RAL 9005 The AMDF range is fully compatible with the Access range of accessories. The frames can also be retro fitted with doors and side panels for added security or to maintain an aesthetically pleasing appearance. A wide range of cabling accessories are available to enhance the Access AMDF product. An overview of just some of these accessories is shown below. Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Access Cable Tray For further details please see page 66 Front / Rear Mounted Cable Basket For further details please see page 67 Access Cable Basket For further details please see page 66 Front / Rear Mounted Velcro Cable Tray For further details please see page 67 Access Twist & Lock Arms For further details please see page 74 Access Computer Floor Plinth For further details please see page 43 10

13 Advanced Managed Distribution Frame Option Overview Two standard heights - 42U & 47U with other sizes available subject to order up to a maximum 52U Available in 31.5 (800mm) wide configuration Three standard depth options including 26.6 (675mm), 36.0 (915mm) and 39.4 (1000mm) with other depth options available to order up to a maximum 55.1 (1400mm) Finish Options (see page 33) Cooper B-Line s Access cabinet is available in a range of standard quick delivery color options as follows; Black with Black Trim Color Ref. B (default) Light Gray with Blue Trim Color Ref. A Other standard or custom color options are also available subject to minimum order quantities and lead times Light Gray with Black Trim Color Ref. C Black with Blue Trim Color Ref. D Light Gray with Mid Gray Trim Color Ref. G Accessories A comprehensive range of accessories are available to suit every application. Details of specific items can be found on the pages indicated below; Cabinet Cladding Enhancements..... Pages Cabinet Floor Mounting Options Pages Base Cable Entry Pages Roof Cable Entry Page 46 Vertical Cable Management Pages 40, Horizontal Cable Management Pages Rack Mounted Thermal Management Pages In Cabinet Air Management Pages Fixed & Sliding Shelf Options Pages Bolt Together/Ganging Options Page 85 Earthing Accessories Pages Access Control Pages Environmental Monitoring Pages Part Number Part Number Effective Height Width Depth (Assembled) (Flat Packed) U in. (mm) in. (mm) in. (mm) A4286AMDFB A4286AMDFBK 26.6 (675) A4289AMDFB A4289AMDFBK (2000) 31.5 (800) 36.0 (915) A4281AMDFB A4281AMDFBK 39.4 (1000) A4786AMDFB A4786AMDFBK 26.6 (675) A4789AMDFB A4789AMDFBK (2222) 31.5 (800) 36.0 (915) A4781AMDFB A4781AMDFBK 39.4 (1000) 11

14 Co-Locate/Multi-Hosting Cabinet Introduction The Access Co-Locate / Multi Hosting cabinet range provides the perfect space saving solution, allowing either two or three conventional rack spaces to be housed within a single cabinet foot print. With individually keyed bays, the Access Co-Locate cabinet offers the additional benefit of allowing tiered access control. By controlling the issue of keys, administrators can limit users to either individuals or groups of bays. This functionality can be further enhanced with Cooper B-Line s i-pal programmable electronic locking solution. Multi Hosting / Co-Locate Access Cabinet Each unit is configured as follows; Basic Access frame fitted with Nylon skids Divider bar assembly (single divider bar on 2-bay variants and twin divider bars on 3-bay variants) Vented divider panel fitted to the divider bar assemblies Supplied with 2 x pairs of independent fully adjustable, 19-inch mounting angles in each bay Fitted with 80% vented steel doors front and rear with each pair of doors being individually keyed Top panel configured as follows: - Fully vented panel fitted at the rear - Remaining top panel aperture filled with plain panels Standard Finish: Black with Black Trim - RAL 9005 Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Cladding Options Include Plain Steel Doors Split Side Panels Fully configurable top panel assembly (using standard Access top panels) Configurable mechanical key, mechanical combination, or electronic locking options Part Number Part Number Bays Effective Height Width Depth (Assembled) (Flat Packed) U in. (mm) in. (mm) in. (mm) A4268COLOC2B A4268COLOC2BK 36.0 (915) A4261COLOC2B A4261COLOC2BK (2000) 23.6 (600) 39.4 (1000) A4262COLOC2B A4262COLOC2BK 47.2 (1200) A4288COLOC2B A4288COLOC2BK 36.0 (915) A4281COLOC2B A4281COLOC2BK (2000) 31.5 (800) 39.4 (1000) A4282COLOC2B A4282COLOC2BK 47.2 (1200) A4288COLOC3B A4288COLOC3BK 36.0 (915) A4281COLOC3B A4281COLOC3BK (2000) 31.5 (800) 39.4 (1000) A4282COLOC3B A4282COLOC3BK 47.2 (1200) 12

15 Co-Locate/Multi-Hosting Cabinet Option Overview Available in both 42U and 47U standard heights with other heights available to order up to a maximum of 52U Available in 23.6 (600mm) and 31.5 (800mm) wide configurations Three standard depth options including 36.0 (915mm), 39.4 (1000mm) and 47.2 (1200mm) with other depth options available to order up to a maximum of 55.1 (1400mm) deep. Finish Options (see page 33) Cooper B-Line s Access cabinet is available in a range of standard quick delivery color options as follows; Black with Black Trim Color Ref. B (default) Light Gray with Blue Trim Color Ref. A Other standard or custom color options are also available subject to minimum order quantities and lead times Light Gray with Black Trim Color Ref. C Black with Blue Trim Color Ref. D Light Gray with Mid Gray Trim Color Ref. G Accessories A comprehensive range of accessories are available to suit every application. Details of specific items can be found on the pages indicated below; Cabinet Cladding Enhancements..... Pages Cabinet Floor Mounting Options Pages Base Cable Entry Pages Roof Cable Entry Page 46 Vertical Cable Management Pages 40, Horizontal Cable Management Pages Rack Mounted Thermal Management Pages In Cabinet Air Management Pages Fixed & Sliding Shelf Options Pages Bolt Together/Ganging Options Page 85 Earthing Accessories Pages Access Control Pages Environmental Monitoring Pages Internal Options Include Plain Divider Panels Vertical Cable Trays (independently mounted in each bay) Vertical Cable Basket (independently mounted in each bay) Secure Cabling Channels in 31.5 (800mm wide cabinets only) Part Number Part Number Bays Effective Height Width Depth (Assembled) (Flat Packed) U in. (mm) in. (mm) in. (mm) A4769COLOC2B A4769COLOC2BK 36.0 (915) A4761COLOC2B A4761COLOC2BK (2222) 23.6 (600) 39.4 (1000) A4762COLOC2B A4762COLOC2BK 47.2 (1200) A4789COLOC2B A4789COLOC2BK 36.0 (915) A4781COLOC2B A4781COLOC2BK (2222) 31.5 (800) 39.4 (1000) A4782COLOC2B A4782COLOC2BK 47.2 (1200) A4789COLOC3B A4789COLOC3BK 36.0 (915) A4781COLOC3B A4781COLOC3BK (2222) 31.5 (800) 39.4 (1000) A4782COLOC3B A4782COLOC3BK 47.2 (1200) 13

16 3 into 2 Cabinet Introduction Each assembly comprises of two 31.5 (800mm) wide specially configured Access cabinets bayed together. The unique corner-less frame construction allows up to 3 sets of 19-inch mounting rails to be fitted within the footprint of two conventional 31.5 (800mm) wide cabinets. This arrangement allows up to 50% more equipment to be installed within the foot print normally taken by two conventional cabinets. The assembly can be supplied with three sets of full depth 19-inch rails front and rear. For applications requiring vertical cable management to accommodate higher volumes of cabling, users may choose to have the assembly configured with three sets of 19-inch rails at the front and two sets of 19-inch rails at the rear. Access 3 into 2 Cabinet Each unit is configured as follows; Two specially configured Access 31.5 (800mm) wide frames each fitted with Nylon skids. Each frame has the center vertical extrusions removed to facilitate full depth mounting in the center bay position Three sets of fully adjustable, 19-inch mounting rails fitted at the front of the assembly The choice of either two sets or three sets of fully adjustable, 19-inch mounting angles fitted at the rear of the assembly Standard Finish: Black with Black Trim - RAL 9005 Assembly cladding can be ordered separately as required. Examples of typical cladding arrangements are shown below. Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 14

17 3 into 2 Cabinet Option Overview Available in both 42U and 47U standard heights with other heights available to order up to a maximum of 52U Available in 23.6 (600mm) and 31.5 (800mm) wide configurations Three standard depth options including 36.0 (915mm), 39.4 (1000mm) and 47.2 (1200mm) with other depth options available to order up to a maximum of 55.1 (1400mm) deep. Finish Options (see page 33) Cooper B-Line s Access cabinet is available in a range of standard quick delivery color options as follows; Black with Black Trim Color Ref. B (default) Light Gray with Blue Trim Color Ref. A Other standard or custom color options are also available subject to minimum order quantities and lead times Light Gray with Black Trim Color Ref. C Black with Blue Trim Color Ref. D Light Gray with Mid Gray Trim Color Ref. G Accessories A comprehensive range of accessories are available to suit every application. Details of specific items can be found on the pages indicated below; Cabinet Cladding Enhancements..... Pages Cabinet Floor Mounting Options Pages Base Cable Entry Pages Roof Cable Entry Page 46 Vertical Cable Management Pages 40, Horizontal Cable Management Pages Rack Mounted Thermal Management Pages In Cabinet Air Management Pages Fixed & Sliding Shelf Options Pages Bolt Together/Ganging Options Page 85 Earthing Accessories Pages Access Control Pages Environmental Monitoring Pages Part Number Part Number Sets of Rails Effective Height Width Depth (Assembled) (Flat Packed) Front Back U in. (mm) in. (mm) in. (mm) A4286DB A4286DBK 26.6 (675) A4289DB A4289DBK (2000) 63.0 (1600) 36.0 (915) A4281DB A4281DBK 39.4 (1000) A4286EB A4286EBK 26.6 (675) A4289EB A4289EBK (2000) 63.0 (1600) 36.0 (915) A4281EB A4281EBK 39.4 (1000) A4786DB A4786DBK 26.6 (675) A4789DB A4789DBK (2222) 63.0 (1600) 36.0 (915) A4781DB A4781DBK 39.4 (1000) A4786EB A4786EBK 26.6 (675) A4789EB A4789EBK (2222) 63.0 (1600) 36.0 (915) A4781EB A4781EBK 39.4 (1000) 15

18 High Density Copper Cabling Cabinet Introduction The Access High Density Cabling Cabinet is the first cabinet designed to solve the problems of today s networking environment. It provides unique working and cabling accessibility to totally transform cabinet installation layouts, on-side installation time and on-going systems management. The unique open architecture construction of the corner-less design, coupled with the ability to quickly remove all of the external cladding, provides the ability to create an installation that is far neater and more user friendly. Compared with conventional cabinets, systems can be deployed far more quickly without compromising the quality of the installation. The cabinet promotes the maintenance of bend radii including requirements for Category 6A cabling further helping to avoid messy, un-workable cabling arrangements. The Access HDC cabinet s open frame structure provides virtually 360 o total accessibility, prior to fitting panels and doors, which gives installers maximum working access and the opportunity to greatly improve installation times. The elimination of corner posts also removes the need to excessively inset 19 mounting angles, achieving maximum working space. The unique design of the enclosure, which is 35.4 (900mm) wide and 19.7 (500mm) deep, allows extra space for cable management each side of the 19-inch mounting angles. The 19-inch mounting angles are designed with finger cable management every 1U on both sides allowing for complete support of patch cords so that no U space is wasted with cable management bars. Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Access High Density Copper Cabling Cabinet Each unit is configured as follows; Basic frame fitted with nylon feet One pair of fully adjustable, 19-inch rails fitted with RCM+ fingers Twenty twist and lock cable management arms (10 per 19-inch rail) Single piece plain top panel Access HDCC Cabinet Two pairs of plain side panels Single piece plain steel rear door Double plain steel front door Description Packaging Part Number Access High Density Copper Cabling Cabinet - Pallet/Flat Pack** HD420905C8CYSP1NNB 42U High x 35.4 (900mm) Wide x 19.7 (500mm) Deep as per standard specification Access High Density Copper Cabling Cabinet - Pallet/Flat Pack** HD470905C8CYSP1NNB 47U High x 35.4 (900mm) Wide x 19.7 (500mm) Deep as per standard specification ** Flat packed subject to additional charge Access HDCC Cable Through Trough Description Packaging Part Number Access High Density 3U Cable Trough Assembly - Fitted / Special HD3UCTB Access High Density 3U Cable Trough Extender - Fitted / Special HD3UCTEB Allows troughs to be coupled up when cabinets are bayed/ganged back-to-back. Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 16

19 High Density Copper Cabling Cabinet Option Overview Available in 42U and 47U standard height options Optional cable through troughs Access High Density Cabling Cabinet 2-Bay Computer Floor Plinth to suit 34.5 (900mm) wide x 19.7 (500mm) HDCC assemblies bayed back-to-back Finish Options (see page 33) Cooper B-Line s Access cabinet is available in a range of standard quick delivery color options as follows; Black with Black Trim Color Ref. B (default) Light Gray with Blue Trim Color Ref. A Other standard or custom color options are also available subject to minimum order quantities and lead times Light Gray with Black Trim Color Ref. C Black with Blue Trim Color Ref. D Light Gray with Mid Gray Trim Color Ref. G Accessories A comprehensive range of accessories are available to suit every application. Details of specific items can be found on the pages indicated below; Vertical Cable Management Pages 40, Horizontal Cable Management Pages Fixed & Sliding Shelf Options Pages Earthing Accessories Pages Access Control Pages Environmental Monitoring Pages Access HDCC Bolt Together Kit Description Packaging Part Number Access High Density Cabinet Baying Kit Bagged HDBKB Access HDCC Baying Side Panels Description Packaging Part Number Access High Density Cabling Cabinet - Special HDPDSP425B 42U x 19.7 (500mm) Deep Double Side Panels (fills in the center side panel aperture when baying/ganging two HDCC cabinets back-to-back) Access High Density Cabling Cabinet - Special HDPDSP475B 47U x 19.7 (500mm) Deep Double Side Panels (fills in the center side panel aperture when baying/ganging two HDCC cabinets back-to-back) Access HDCC Cabinet Computer Floor Plinth Description Packaging Part Number Access High Density Cabling Cabinet - Special HD2BFP95B 2-Bay Computer Floor Plinth to suit 35.4 (900mm) wide x 19.7 (500mm) deep. AHDCC assemblies (back-to-back baying/ganging) Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 17

20 High Density Fiber Cabling Cabinet Features The Access High Density Fiber Cabling Cabinet has been further developed to meet the exacting needs demanded by high density fiber cabling installations. Capitalizing on the strength and modularity of the Access Cabinet design, the internal cabinet envelope can be configured to provide a range of mounting configurations including standard 19-inch. Sharing the same key attributes of a conventional Access cabinet, the corner less open architecture frame allows for secure but easy removal of all external cladding in a matter of seconds. This feature provides the platform to allow cables to be installed far more quickly without compromising the integrity of the cables or connectors. The resultant installation allows safe bend radii to be maintained while at the same time avoiding messy, haphazard cabling arrangements. The unique design of the enclosure, which is 35.4 (900mm) wide and 19.7 (500mm) deep, together with the ability to offset the mounting angles, enables the provision for cable management to be incorporated easily. A range of standard options including cable management spools, cable supports, cable troughs and cable ties are available to enhance the design. Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Specifically designed for high density fiber cabling installations Full 360 cabling access thanks to the quick release cladding Integrated cable management (RCM+ fingers, cable spools etc.) Optional cable through troughs Unhindered cable top or bottom cable entry unrivaled cabling access with easy access for front to rear cabling down the sides of the cabinet Cabinet Specifications Each unit is configured as follows; Basic frame fitted with nylon feet One pair of full adjustable, 19-inch rails fitted with RCM+ fingers on right hand mounting angle only Vertical cable manager fitted with 8 off cable spools Single piece plain top panel Two pairs of plain side panels Single piece plain steel rear door Double plain steel front door Specifications 42U and 47U standard height options Available in 35.4 inch (900mm) width by 19.7 inch (500mm) deep as standard Available fully assembled and palletized as standard with flat pack available upon request Weight load capacity 2,200 lbs. (1000kg) Protection Rating - NEMA1 (IP20) Access HDCC Fiber Cabling Cabinet Benefits Designed to be compliant with conventional fiber cabling requirements Totally open construction for ease of cross-patching Reduced installation time Cabling installations made easy Maximum useable space unrivaled working access Excellent cabling accessories Flexible panel configurations 18 Finish Options (see page 33) Cooper B-Line s Access cabinet is available in a range of standard quick delivery color options as follows; Black with Black Trim - Color Ref. B (Default) Other standard or custom color options are also available subject to minimum order quantities and lead times including; Light Gray with Blue Trim - Color Ref. A Description Packaging Part Number Access High Density Cabling Cabinet - Pallet/Flat Pack** HF420905C8CYSP1NNB 42U High x 35.4 (900mm) Wide x 19.7 (500mm) Deep as per standard specification Access High Density Cabling Cabinet - Pallet/Flat Pack** HF470905C8CYSP1NNB 47U High x 35.4 (900mm) Wide x 19.7 (500mm) Deep as per standard specification ** Flat packed subject to additional charge

21 High Density Fiber Cabling Cabinet Access HDCC Fiber Cable Storage Drawers Description Packaging Part Number Drawer Unit Access High Density 19-inch 2U Sliding Storage drawer unit Fitted / Special HF19DU2UB Access High Density 19-inch 3U Sliding Storage drawer unit Fitted / Special HF19DU3UB Access HDCC Horizontal Cable Managers Horizontal Cable Manager Cable Spool Arms Description Packaging Part Number 19-Inch 1U Horizontal Cable Management Panel With Hinged Cover Individually Boxed SB87019S1FB 19-Inch 2U Horizontal Cable Management Panel With Hinged Cover Individually Boxed SB87019S2FB 19-Inch 3U Horizontal Cable Management Panel With Hinged Cover Individually Boxed SB87019S3FB Access HDCC Fiber Cabling Accessories Description Packaging Part Number Cable Spool Arms Fitted / Special SB8607SPFB Cable Strap Mount Fixings Bagged Pack Of 100 SB862PIF Cable Strap Mount Bagged Pack Of 100 SB862CSM Cable Wrap (Yellow Nylon) 5 /8 (16mm) x 5 (127mm) Supplied as single pieces SB72558x5 Cable Wrap (Yellow Nylon) 1 (25mm) x 10 (254mm) Supplied as single pieces SB7251x10 Cable Catch (Gray Nylon) 5 /8 (16mm) x 4 (101mm) Supplied as single pieces SB72658x4 Cable Catch (Gray Nylon) 1 (25mm) x 8 (203mm) Supplied as single pieces SB7261x8 Cable Strap (Gray Nylon) 5 /8 (16mm) x 6 (152mm) Supplied as single pieces SB72758x6 Cable Hanger (Gray Nylon) 3 /4 (19mm) x 6 (152mm) Supplied as single pieces SB72834x6 Cable Strap Mount Fixings Cable Strap Mount Access HDCC Fiber Cabling Cabinet Bayed Side Panel Description Packaging Part Number 42U High x 19.7 (500mm) Deep - Plain Double Side Panel Special HDPDSP425B (fills in the center side panel opening when baying/ganging two HDCC cabinets back to back) 47U High x 19.7 (500mm) Deep - Plain Double Side Panel Special HDPDSP475B (fills in the center side panel opening when baying/ganging two HDCC cabinets back to back) Access HDCC Velcro Cable Tidies Description Packaging Part Number Access High Density Cabinet Baying Kit Bagged HDBKB Access HDCC Cabinet Computer Floor Plinth 2-Bay Computer Floor Plinth Description Packaging Part Number Access High Density Cabling Cabinet 2-Bay Computer Floor Plinth Special HD2BFP95B To Suit 35.4 (900mm) wide x 19.7 (500mm) deep AHDCC Assemblies (back to back baying) Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 19

22 Aisle Containment Features Cooper B-Line s i-acs system continues the design philosophy of suppling modular solutions developed to grow with demand. Designed to be fully compatible with the industry leading Access Cabinet range, the i-acs solution can be easily deployed into both new and existing sites. The flexibility of the design also allows Cooper B-Line to supply solutions to fit third party racks and enclosures from other equipment manufacturers. Standard options to fit 42U & 47U Access Cabinets Standard designs allow flexibility of aisle spacing 44 (1100mm) to 48 (1200mm) aisle spacing option 68 (1700mm) to 72 (1800mm) aisle spacing option Fully or partially glazed roof panels allowing light penetration and the integration of fire monitoring and suppression systems Double sliding doors provide easy access without compromising room layouts Can be configured to provide cable management options between bayed cabinets as well as above the aisle spacing Choice of door locking options including mechanical and electronic locking No trip hazard at the door threshold Benefits Option of fully or partially glazed doors allowing light penetrations as well as unobscured view of the aisle space No need to order special cabinets as the system fits to standard Access cabinets Fits both new and existing Access cabinet deployments Wide range of engineered options Supplied with full easy to follow assembly instructions Modular design allows installations to be expanded or contracted easily Significantly improves cooling efficiencies allowing reduced operational costs or the option of increasing equipment densities Specifications Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Doors Aluminum framed mounted onto sliding guide rails Non locking, key locking, mechanical combination, and electronic locking options Clear perspex glazed panels for improved light penetration Roof Panels Aluminum frame assembly on adjustable aisle spacing and sliding panel options Steel frame option for fixed aisle spacing options Clear perspex glazed panels for improved light penetration 20

23 Aisle Containment Why Use Cold Aisle Containment? In today s environment where technology compaction is leading to higher computing densities, the need for not only adequate but also efficient cooling systems continues to be of growing importance. At one time businesses may have considered simply reducing the number of active equipment units deployed in each rack space. With increasing energy, labor and real estate costs this is no longer an option, other solutions need to be found. What s the right solution? There is no single solution that fits every application as each site will have different constraints and demands. The one thing that each site will have in common is that, by avoiding hot and cold crossover, the cooling infrastructure will run more efficiently, leading to lower operational costs and/or improved equipment density capabilities. In a conventional data room environment configured in a hot aisle / cold aisle layout, the Computer Room Air Conditioning units (CRAC units) perform the function of collecting warm air (return air) from the local ambient environment. This return air is then cooled by the CRAC unit before being circulated back into the room environment. Where a raised computer floor is employed in the data room, it is quite usual for the cold air feed from the CRAC unit to be fed under the floor void, in this scenario, vented floor tiles are deployed in strategic locations, allowing cold air to be forced up into the cold aisle, allowing the active equipment to draw the cold air across the electronics to cool them. The hot air is then expelled out from the rear of the cabinet into the hot aisle. While this provides a cooling mechanism, it is clear to see a number of drawbacks in the layout. 1. The cold air is free to mix with the local ambient air leading to a rise in temperature of the cold air, which in turn reduces the cooling efficiency of the air. 2. The cold air cabinet bypass the active equipment completely, simply circulating back to the CRAC unit. 3. The hot air exhausted from the rear of the cabinet can easily be drawn back into the front of the cabinet, potentially leading to the generation of hotspots. Cold aisle containment effectively takes care of a number of these issues, as both the feed air and the return air are segregated. As a consequence, the full cooling potential of the cold air is utilized, providing improved cooling and operational efficiency. Cold Aisle Containment Conventional Hot Aisle/Cold Aisle Various Glazed Roofing Options Overhead Cable Management Aisle Containment Sliding Doors Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 21

24 Aisle Containment Part Number Description Packaging Cable Channel Top Panel Assembly AACSCC06STB Access Aisle Containment System (600mm) Wide Standard Supplied Individually Cable Channel with Brush Strip Entry Wrapped AACSCC08STB Access Aisle Containment System (800mm) Wide Standard Supplied Individually Cable Channel with Brush Strip Entry Wrapped AACSCC09STB Access Aisle Containment System (900mm) Wide Standard Supplied Individually Cable Channel with Brush Strip Entry Wrapped Fixed Glazed Roof Panel AACSRP1203FPCLB Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit Supplied Flat 48 (1200mm) fixed aisle spacing and a 11.8 (300mm) wide cabinet unit Packed AACSRP1206FPCLB Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit Supplied Flat 48 (1200mm) fixed aisle spacing and a 23.6 (600mm) wide cabinet unit Packed AACSRP1208FPCLB Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit Supplied Flat 48 (1200mm) fixed aisle spacing and a 31.5 (800mm) wide cabinet unit Packed AACSRP1209FPCLB Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit Supplied Flat 48 (1200mm) fixed aisle spacing and a 35.4 (900mm) wide cabinet unit Packed AACSRP1803FPCLB Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit Supplied Flat 72 (1800mm) fixed aisle spacing and a 11.8 (300mm) wide cabinet unit Packed AACSRP1806FPCLB Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit Supplied Flat 72 (1800mm) fixed aisle spacing and a 23.6 (600mm) wide cabinet unit Packed AACSRP1808FPCLB Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit Supplied Flat 72 (1800mm) fixed aisle spacing and a 31.5 (800mm) wide cabinet unit Packed AACSRP1809FPCLB Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit Supplied Flat 72 (1800mm) fixed aisle spacing and a 35.4 (900mm) wide cabinet unit Packed Fixed Adjustable Glazed Roof Panel AACSRP1203AFCLB Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit Supplied Flat 40 (1000mm) - 48 (1200mm) fixed aisle spacing and a 11.8 (300mm) wide cabinet unit Packed AACSRP1206AFCLB Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit Supplied Flat 40 (1000mm) - 48 (1200mm) fixed aisle spacing and a 23.6 (600mm) wide cabinet unit Packed AACSRP1208AFCLB Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit Supplied Flat 40 (1000mm) - 48 (1200mm) fixed aisle spacing and a 31.5 (800mm) wide cabinet unit Packed AACSRP1209AFCLB Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit Supplied Flat 40 (1000mm) - 48 (1200mm) fixed aisle spacing and a 35.4 (900mm) wide cabinet unit Packed AACSRP1803AFCLB Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit Supplied Flat 64 (1600mm) - 72 (1800mm) fixed aisle spacing and a 11.8 (300mm) wide cabinet unit Packed AACSRP1806AFCLB Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit Supplied Flat 64 (1600mm) - 72 (1800mm) fixed aisle spacing and a 23.6 (600mm) wide cabinet unit Packed AACSRP1808AFCLB Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit Supplied Flat 64 (1600mm) - 72 (1800mm) fixed aisle spacing and a 31.5 (800mm) wide cabinet unit Packed AACSRP1809AFCLB Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit Supplied Flat 64 (1600mm) - 72 (1800mm) fixed aisle spacing and a 35.4 (900mm) wide cabinet unit Packed Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 22

25 Aisle Containment Part Number Description Packaging Sliding Glazed Roof Panel AACSRP1203SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit Supplied Flat 48 (1200mm) fixed aisle spacing and a 11.8 (300mm) wide cabinet unit Packed AACSRP1206SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit Supplied Flat 48 (1200mm) fixed aisle spacing and a 23.6 (600mm) wide cabinet unit Packed AACSRP1208SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit Supplied Flat 48 (1200mm) fixed aisle spacing and a 31.5 (800mm) wide cabinet unit Packed AACSRP1209SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit Supplied Flat 48 (1200mm) fixed aisle spacing and a 35.4 (900mm) wide cabinet unit Packed AACSRP1803SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit Supplied Flat 72 (1800mm) fixed aisle spacing and a 11.8 (300mm) wide cabinet unit Packed AACSRP1806SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit Supplied Flat 72 (1800mm) fixed aisle spacing and a 23.6 (600mm) wide cabinet unit Packed AACSRP1808SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit Supplied Flat 72 (1800mm) fixed aisle spacing and a 31.5 (800mm) wide cabinet unit Packed AACSRP1809SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit Supplied Flat 72 (1800mm) fixed aisle spacing and a 35.4 (900mm) wide cabinet unit Packed Sliding Doors AACSSD4212NLCLB Access Aisle Containment System Double Sliding Doors - To suit 42U height cabinets Supplied Flat set configured with a 48 (1200mm) wide aisle spacing - non locking assembly Packed AACSSD4218NLCLB Access Aisle Containment System Double Sliding Doors - To suit 42U height cabinets Supplied Flat set configured with a 72 (1800mm) wide aisle spacing - non locking assembly Packed AACSSD4712NLCLB Access Aisle Containment System Double Sliding Doors - To suit 47U height cabinets Supplied Flat set configured with a 48 (1200mm) wide aisle spacing - non locking assembly Packed AACSSD4718NLCLB Access Aisle Containment System Double Sliding Doors - To suit 47U height cabinets Supplied Flat set configured with a 72 (1800mm) wide aisle spacing - non locking assembly Packed Overhead Cable Basket Assembly AACSCB1215 Access Aisle Containment Overhead Basket - 6 (150mm) - 48 (1200mm) Supplied Individually Wide Aisle Spacing Supplied Complete With Fittings Wrapped AACSCB1230 Access Aisle Containment Overhead Basket - 12 (300mm) - 48 (1200mm) Supplied Individually Wide Aisle Spacing Supplied Complete With Fittings Wrapped AACSCB1815 Access Aisle Containment Overhead Basket - 6 (150mm) - 72 (1800mm) Supplied Individually Wide Aisle Spacing Supplied Complete With Fittings Wrapped AACSCB1830 Access Aisle Containment Overhead Basket - 12 (300mm) - 72 (1800mm) Supplied Individually Wide Aisle Spacing Supplied Complete With Fittings Wrapped Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 23

26 Dynamic Part Numbering Configurator Assembling Your Custom Access Cabinet is as Easy as: 1, 2, 3, 4, 5, 6 The Access cabinet platform is designed to provide high quality enclosure solutions to the market at competitive prices and short lead times. Ordering the Access cabinet can be done by ordering individual components or by ordering a configured enclosure with a single part number. Use the matrix on page 25 to build the part number for your desired Access cabinet configuration. Step 1 Step 2 Step 3 Choose Frame Configuration Choose Front & Rear Door Configuration Choose Side Panel Configuration Step 4 Steps 5 Steps 6 No Character Assembled & Palletized K Flat Packed Choose Top Panel Configuration Choose Color Configuration Choose Supply Configuration Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Note: Items shown with a yellow zinc finish are now furnished with a clear zinc finish. 24

27 Dynamic Part Numbering Configurator Assembling Your Custom Access Cabinet is as Easy as: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Frame Doors Sides Tops Color Pkg A A 1 C G S P P P V A K Access Unit Sizes Unit Width 6 = 23.6 (600mm) 7* = 27.6 (700mm) 8 = 31.5 (800mm) Stock Sizes - 22U, 27U, 39U, 42U, 47U Non Stocked Sizes - 12U, 17U, 32U, 45U, 52U Custom Sizes Available Upon Request Unit Depth 6 = 26.6 (675mm) 9 = 36.0 (915mm) 1 = 39.4 (1000mm) 2 = 47.2 (1200mm) 4* = 55.1 (1400mm) Frame Style Options A = Universal Corner Plates & Jacking Feet P = Standard Plinth & Jacking Feet O = Standard Plinth & Castor C = Frame On Nylon Skids Q = Standard Plinth & Jacking Feet & Castors G = Universal Corner Plates & Castors L = Stabilizing Plinth & Jacking Feet H = Universal Corner Plates & Jacking Feet & Castors M = Stabilizing Plinth & Jacking Feet & Castors Rail Position L =Offset Left C = Center R = Offset Right Rail Type 1 = Sq. Hole 19-inch (x4) 2 = Sq. Hole 23-inch (x4) 3 = #12-24 Tap 19-inch (x4) 4 = #12-24 Tap 23-inch (x4) 5 = Sq. Hole Full Width (x4) 6 = Sq. Hole 19-inch (x2) 7 = Sq. Hole ETSI (x4) 8 = Sq. Hole 19-Inch with RCM+ Fingers (x4) Zone Zone Zone Top Panel Options B = Brush Strip C = Brush Strip Infill E = Vented Brush Strip N = No Panel P = Plain V = Vented X = Plain Infill G = Grommet Knockouts D = Enhanced Brush Strip Entry 2 = 2-Way Fan Tray (110v A/C) 3 = 3-Way Fan Tray (110v A/C) 4 = 2-Way Fan Tray (230v A/C) 5 = 2-Way Fan Tray + Controller 6 = 3-Way Fan Tray (230v A/C) Color Scheme Options A = Light Gray + Blue Trim B = Black + Black Trim (standard finish) C* = Light Gray + Black Trim D* = Black + Blue Trim G* = Light Gray + Mid Gray Trim Side Panel Options P = Plain Both Sides E* = Vented Left Side Only N = No Panels Both Sides L = Plain Left Side Only F* = Vented Right Side Only R = Plain Right Side Only V* = Vented Both Sides Front & Rear Door Options A = Acrylic Glass Door LH Hinged P = Glass Door (Non Vented Styles) RH Hinged B = Acrylic Glass Door RH Hinged Q = Pressurized Rear Door LH Hinged C = Access Cover Trims R = Pressurized Rear Door RH Hinged G = Glass Door (Vented Styles) LH Hinged S = Plain Steel Door LH Hinged H = Glass Door (Vented Styles) RH Hinged T = Plain Steel Door RH Hinged I = High Flow Server Door With Metal Trims LH Hinged V = Vented Steel Door LH Hinged J = High Flow Server Door With Metal Trims RH Hinged W = Vented Steel Door RH Hinged L = Wardrobe Style Double Glass Doors LH Hinged Y = Wardrobe Style Double Plain Steel Doors N = No Doors Z = Wardrobe Style Double Vented Steel Doors O = Glass Door (Non Vented Styles) LH Hinged Packaging Type No Character = Assembled and Palletized K = Each Cabinet Individually Flat Packed B = Cabinet Components Bulk Packed For Local Assembly Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim * = MOQ or extended lead times may apply 25

28 Step 1 - Frame Configuration Options Access, the original corner-less cabinet, has been developed and enhanced with the goal of providing the ultimate 19-inch cabinet solution. Focused on the demands and expectations of a global market driven by technology, Access continues to evolve to meet the new demands and aspirations of the market thanks to the concept of its modular approach. Performing a key role, the cabinet is an essential consideration when deploying an infrastructure solution, as the equipment housed in the cabinet is often Mission Critical and consequently key to the success of the business. Designed from the frame up, the Access Cabinet System has evolved with application excellence and user friendliness in mind. Based on a cantilever frame concept, the base structure comprises tubular frames top and bottom connected by central extrusions. This design allows unhindered 180 degree clearance around the front and rear mounting angles, while at the same time, offering clear access to the internal cabinet envelope. This crucially allows installation and maintenance to be carried out in a far more efficient manner and ultimately provides the tool to reduce the total cost of ownership during the lifetime of the cabinet. The wide range of cabinet sizes offered provides the ability to construct a diverse range of internal configurations, allowing both existing and next generation network components to be housed, irrespective of their mounting requirements. As a consequence, Access is equally at home housing 19-inch (EIA-310 compliant), ETSI (European Telecommunications Standards Institute) or non rack-mounted units and can be configured to offer combinations of mounting technologies in one single cabinet structure. For bayed or ganged installations requiring multiple cabinets bayed or ganged together, Access enables cabinets to be securely fastened together by simply bolting the matching central extrusions together using the pre-drilled bolt-together holes. In the same way that the internal cabinet arrangement can be configured, the external cabinet cladding can be specified to meet individual application requirements. Cladding options include top panels, base panels, side panels and door options with each of these explained in more detail on the following pages. Front to rear adjustment 23.6 (600mm) wide models Lateral adjustment on 31.5 (800mm) wide models Front to rear adjustment 31.5 (800mm) wide models Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 26

29 Access Rail Position Unit Height Rail Type Unit Width Frame Style Unit Depth Step 1 - Frame Configuration Options Frame Doors Sides Tops Color Pkg A A 1 C G S P P P V A K Unit Frame Height A 47 81A1CGSPPPVAK Cabinet Usable Frame Height Cabinet + JF Frame + Casters Frame + Std Plinth Heights U s in. (mm) in. (mm) in. (mm) in. (mm) 22 22U 43.7 (1111) 44.4 (1125) 46.8 (1188) 47.8 (1215) 27 27U 52.5 (1333) 53.1 (1349) 55.5 (1410) 56.6 (1437) 39 39U 73.5 (1867) 74.1 (1882) 76.5 (1944) 77.6 (1971) 42 42U 78.7 (2000) 79.4 (2015) 81.8 (2077) 82.8 (2104) 45* 45U 84.0 (2133) 84.6 (2149) 87.0 (2110) 88.1 (2237) 47 47U 87.5 (2222) 88.1 (2238) 90.5 (2299) 91.6 (2326) 52* 52U 96.2 (2444) 96.9 (2460) 99.3 (2521) (2548) * Denotes that MOQs or extended lead times may apply Unit Frame Width A478 1A1CGSPPPVAK Cabinet Dim W 19-Inch 23-Inch Full Width Width in. (mm) Compatible Compatible Compatible (600) (700) (800) Unit Frame Depth A4781 A1CGSPPPVAK Cabinet Dim D Std. Rail Maximum Depth Centers Rail Centers in. (mm) in. (mm) in. (mm) (675) 16.5 (419) 22.4 (570) 9* 36.0 (915) 26.0 (659) 31.9 (810) (1000) 29.3 (744) 35.2 (895) 2* 47.2 (1200) 37.2 (944) 43.1 (1095) 4* 55.1 (1400) 45.0 (1144) 51.0 (1295) Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 27

30 Step 1 - Frame Configuration Options Frame Style A4781A1CGSPPPVAK Frame Basic Std. Stabilizing Corner Jacking Castors Skids Config. Frame Plinth Plinth Adaptor Plate Feet A C G H P Q L M O U Rail Type Configuration A4781A1CGSPPPVAK Rail Qty. Frame Capacity - Width Description Code Rails 23.6 (600mm) 27.6 (700mm) 31.5 (800mm) 1 Square pierced rails 19-inch centers 4 2 Square pierced rails 23-inch centers 4 3 #12-24 tapped rails 19-inch centers 4 4 #12-24 tapped rails 23-inch centers 4 5 Square pierced rails full width 4 6 Square pierced rails 19-inch centers 2 7 European Telecom Standards Institute (ETSI) rails 4 8 Square pierced rails 19-inch centers with RCM+ fingers 4 Rail Position A4781A1C GSPPPVAK Frame Width Left Right Centered in. (mm) Offset Offset 23.6 (600) C 27.6 (700) L R C 31.5 (800) L R C Left Offset L Right Offset R Centered C Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 28

31 Step 2 - Door Configuration Options Frame Doors Sides Tops Color Pkg A A 1 C G S P P P V A K Front Door Option Rear Door Option The Access Cabinet is available with a wide variety of front and rear door options, all utilizing two point locking and quick release hinges for easy door removal. As with the side panels doors can only be removed once access has been gained to the inside of the cabinet. The locking system of each door operates by a single swing handle assembly. Various types of swing handles are available enabling factory or user configurable locking methods including; Universal key locking swing handles (standard) Individually keyed swing handles (front and rear doors operated by the same unique key) Individually keyed swing handles with a master key (front and rear doors operated by the same unique key with the addition of a master key to operate a batch of locks) Stand alone electronic proximity card locking swing handles i-pal (customer configurable up to 500 users per handle) Networked electronic proximity card locking swing handles i-pal+ with remote override and monitoring (customer configurable up to 4,000 users per handle) Standard Lock Euro-Profile Lock Combination Lock i-pal Lock Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 29

32 Step 2 - Door Configuration Options Door Configuration Options A4781A1CGSPPPVAK Door Door Description Option A Acrylic Glass Door LH Hinged B Acrylic Glass Door LH Hinged C Cover Trims G Glass Door (Vented Styles) LH Hinged H Glass Door (Vented Styles) LH Hinged I High Flow Server Door With Steel Trims LH Hinged J High Flow Server Door With Steel Trims LH Hinged L Wardrobe Style Double Glass Doors N No Door O Glass Door (Non Vented Styles) LH Hinged P Glass Door (Non Vented Styles) RH Hinged Q Pressurized Rear Door LH Hinged R Pressurized Rear Door RH Hinged S Plain Steel Door LH Hinged T Plain Steel Door RH Hinged V 80% Vented Steel Door LH Hinged W 80% Vented Steel Door RH Hinged Y Wardrobe Style Double Plain Steel Doors Z Wardrobe Style Double 80% Vented Steel Doors Easily installed hinging system A & B C G & H I & J L O & P Q & R S & T V & W Y Y Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 30

33 Step 3 - Side Panel Configuration Options Frame Doors Sides Tops Color Pkg A A 1 C G S P P P V A K Side Panel Option Side Panel Configuration Options Side Panel Configuration Option Description A4781A1CGSP PPVAK P Plain Side Panels Fitted Both Sides L Plain Side Panels Fitted LH Side Only R Plain Side Panels Fitted RH Side Only E* Vented Side Panels Fitted LH Side Only F* Vented Side Panels Fitted RH Side Only V* Vented Side Panels Fitted Both Sides N No Side Panels Fitted * Vented side panels are only available as standard in 42U, 45U, and 47U heights and in 36.0 (915mm), 30.4 (1000mm), and 47.2 (1200mm) depth variants. Each cabinet side can be fitted with two half-depth side panels filling the opening between the central extrusion and the front door opening. The panels are depth specific and being narrower than half the cabinet depth makes it far easier to handle should they need to be completely removed. Each panel is fitted with four quick release hinge pins allowing quick and easy removal of individual panels in a matter of seconds. This feature eliminates the need to completely remove individual side panels, as they can be simply swung open to provide access to the internal cabinet envelope and helps to eliminate the chances of side panels getting damaged or lost. Importantly the quick release hinge pins can only be actuated once access has been gained inside the cabinet with access into the cabinet being controlled via the front and rear locking doors. Side panels are available in plain format for all cabinet sizes and in vented format for a range of specific unit configurations. Plain Side Panel Vented Side Panel Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 31

34 Step 4 - Top Panel Configuration Options Frame Doors Sides Tops Color Pkg A A 1 C G S P P P V A K Zone 1 Zone 3 The top frame opening on each Access cabinet offers the opportunity to configure the top panel arrangement to meet the needs of individual applications. The dynamic part numbering matrix makes provision to specify the panel layout in three zones, front, middle and rear. The depth of the cabinet impacts the quantity and type of panels that can be utilized. Details of these layouts are shown in the table below. In instances where the dynamic part number can no longer relate to individual panels (for instance where the 47.2 (1200mm) and 55.1 (1400mm) deep cabinets have more than three panels in the top) The first character (Zone 1) relates to the panel mounted at the front of the cabinet and third character (Zone 3) relates to the panel fitted in the rear of the cabinet. The second character (Zone 2) then defines the center zone layout with the defined panel being mounted at the rear of the zone and the remaining opening filled with plain panels. Top Panel Configuration Options Zone 2 A4781A1CGSPPPVAK Top Panel Option Description Top Panel Option Description Configuration Configuration B Brush Strip Entry Panel X Plain Infill Panel C Brush Strip Infill Panel 2 2-Way Fan Tray (110v A/C) D Enhanced Cable Entry 3 3-Way Fan Tray (110v A/C) E Vented Brush Strip Panel 4 2-Way Fan Tray (230v A/C) N No Panel 5 2-Way Fan Tray + TCM1000 Controller P Plain Panel 6 3-Way Fan Tray (230v A/C) V Vented Panel G Grommet Knockouts Cabinet Depth Total Standard Infill Panels in. (mm) Panels Panel Required 26.6 (675mm) (915mm) (1000mm) (1200mm) (1400mm) Roof Mounted Fan Trays Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Thermally Controlled & Monitored Roof Fan trays 32

35 Step 5 - Color Options Frame Doors Sides Tops Color Pkg A A 1 C G S P P P V A K The Access cabinet is available in a range of standard color options as shown below. Color Options Color Options A4781A1CGSPPPVA K Color Option Description Color Option Description Code Code A Light Gray with Blue Trim D Black with Blue Trim B Black with Black Trim G Light Gray with Mid Gray Trim C Light Gray with Black Trim A B C D G The unique and stylish corner moulding of the Access range provides an easy system for individual branding or cabinet identification. Silk screening on glass doors is also available. Standard Trim Color Options Black - RAL 9005 (Default) Blue - NCS 4550-R90B Mid Gray - NCS 4502 Standard Panel Color Options Black - RAL 9005 (Default) Light Gray - NCS 1502-Y Custom color options are available subject to a single delivery quantity of a minimum of ten units Color requirements must be specified against a standard color system, e.g. RAL color scheme. Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 33

36 Step 6 - Packaging Options Frame Doors Sides Tops Color Pkg A A 1 C G S P P P V A K Packaging Options The Access cabinet is available in a range of packaging options to meet the demands of end users and channel partners. Color Options Package Code No Character B C K A4781A1CGSPPPVAK Option Description Assembled and Palletized Bulk Packed Flat Packed and Crated Flat Packed No Character Assembled and Palletized B Bulk Packed C Flat Packed and Crated K Flat Packed Specifying & Ordering Component Assemblies In some cases, it may be advantageous to order cabinets in component parts rather than a top level single configured part. The following pages provide an overview of the part number matrixes applicable together with an overview of the options available. Following a similar layout as that previously outlined for the configured cabinets, the following pages will look at assemblies in the following order; Configuring cabinets for Thermal Loads Cabinet frame, including; Base mounting options Mounting angle types and configurations Packaging types Mounting rail options Base panel options Computer floor plinth options Top panel options Door options (universal for front or rear) Side panel options Vertical cable management options Horizontal cable management options Universal cable management options In rack cooling options Cabinet thermal enhancements Shelving options Power distribution options Access control and environmental monitoring solutions Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 34

37 Configurating A Cabinet For Thermal Loads Cabinet Heat Load (kwt) Notes Std Network / Cabling Cabinet Std Server / Switch Cabinet Server / Switch Cabinet + 19-Inch Forms part of enhanced & / Or Switch Side Blanking Panels cabinet build Server / Switch Cabinet Forms part of enhanced + Vertical Baffles cabinet build Server / Switch Cabinet + Top & Forms part of enhanced Bottom Blanking Angles cabinet build Server / Switch Cabinet + Base Can form part of enhanced Blanking Assembly cabinet build Enhanced Server / Switch Cabinet + Aisle Containment 2 2 Enhanced Server / Switch Cabinet + Ducted Return Air Enhanced Server / Switch Cabinet + In Row Close Coupled Air / Water Heat Exchangers 1 = Base blanking is designed to stop air leakage through the base of the cabinet. Cabinet can be sat directly onto the floor but service entry points will need sealing. 2 = Assumes aisle containment with in row close coupled heat exchangers. 3 = Assumes in row close coupled heat exchangers replace conventional CRAC unit configuration. 35

38 Thermal Configuration Components Access Network / Cabling Cabinet - 1kWt Heat Load The Access Network / Cabling cabinet configuration incorporates vented glazed front doors and solid steel rear doors. From a thermal management perspective this cabinet configuration has limited capability to move air through the cabinet space and is only suitable for housing limited active equipment generating no more than 1kWt (kilowatt thermal) of heat load. As with all Access cabinets the configuration can be adapted to suit nearly every application or demand. Access Server / Switch Cabinet - 3kWt Heat Load The Access Server / Switch cabinet configuration incorporates vented doors front and rear utilizing an 80% free area pattern mesh. Users can choose from a range door options including flat form single door to double door options through to our high flow server door configurations. In normal conditions where installations are operating in line with the ASHRAE standards these cabinet configurations are capable of managing heat loads of up to 3kWt. Cooper B-Line always recommends the use of 31.5 (800mm) wide cabinets when deploying equipment configured to cool using side to side convection. Access provides a truly scalable solution design to be adaptable to application demands Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 36

39 Thermal Configuration Components Enhanced Access Server / Switch Cabinet - 8kWt Heat Load When considering deploying heat loads in excess of 3kWt it can often be beneficial from an efficiency standpoint to consider deploying baffles and blanking to minimize recirculation within the cabinet space and segregate your cold air feed from your warm air return. The Access Cabinet offers a range of in field retro fit-able components providing the option to manage air flow within the cabinet envelope to maximize operational efficiency. These options include vertical baffle sets, horizontal baffle sets, 19-inch blanking plates to suit every application, as well as base blanking options to manage incoming services. Managing the segregation of supply and return air within the cabinet envelope can reduce your equipment inlet supply temperatures as much as 14 F (8 C). Wide range of horizontal blanking options Vertical Baffles for 23.6 (600mm) & 31.5 (800mm) Wide Cabinets Access Aisle Containment Taking the segregation of the supply and return air one step further, the Access Aisle Containment system provides a fully retro fit-able option. Designed to mount to the Access cabinet, the Access Aisle Containment solution offers a truly scalable solution which can be easily adapted to meet individual locations or installations. Utilizing a range of roof options and sliding end of aisle door options the Access Aisle Containment solution can be configured to ensure that either the supply air (cold aisle containment) or exhaust air (hot aisle containment) is managed. In the case of cold aisle containment the only path of exit for the cold air is through the active component where it provides maximum cooling effect. In addition a contained cold aisle ensures a more uniform air delivery temperature within in the contained aisle. In the case hot aisle containment the warm air is cycled back to the cooling medium (CRAC or in row cooling unit) at a higher temperature providing significantly improved cooling efficiency. Whatever the demand, Cooper B-Line has a solution to help improve your cooling efficiency and reducing your operating costs. Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 37

40 Component Assembly Specification & Part Numbers Frame Only Assemblies Front to rear adjustment 23.6 (600mm) wide models Lateral adjustment on 31.5 (800mm) wide models Front to rear adjustment 31.5 (800mm) wide models A A 1 C A K Access Unit Heights 47 = 47U 45* = 45U 42 = 42U 39 = 39U 27 = 27U 22 = 22U Unit Widths 6 = 23.6 (600mm) 7 = 27.6 (700mm) 8 = 31.5 (800mm) Unit Depths 6 = 27 (675mm) 9 = 37 (915mm) 1 = 40 (1000mm) 2 = 48 (1200mm) 4* = 56 (1400mm) Frame Configuration A = Frame With Corner Plates & Jacking Feet C = Frame Without Corner Plates Refer to page 25 for other configurations Mounting Rails 1 = Sq. Hole 19-inch (x4) 2 = Sq. Hole 23-inch (x4) 3 = #12-24 Tap 19-inch (x4) 4 = #12-24 Tap 23-inch (x4) 5 = Sq. Hole Full Width (x4) 6 = Sq. Hole 19-inch (x2) 7 = Sq. Hole ETSI (x4) 8 = Sq. Hole 19-Inch with RCM+ Fingers (x4) Rail Positions L = Left R = Right C = Center Color Codes A = Light Gray with Blue Trim B = Black with Black Trim C = Light Gray with Black Trim D = Black with Blue Trim G = Light Gray with Mid Gray Trim Packaging No Character = Assembled and Palletized K = Each Cabinet Individually Flat Packed B = Cabinet Components Bulk Packed For Local Assembly Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 38

41 Component Assembly Specification & Part Numbers Effective Overall Frame Part Number Shipping Unit Height Height * Width Depth See Legend Weight in. (mm) in. (mm) in. (mm) On Page 38 in. (kg) 22U 43.7 (1111) 23.6 (600) 26.6 (675) A2266XXC X 82.9 (37.6) 31.5 (800) 26.6 (675) A2286XXC X (51.8) 26.6 (675) A2766XXC X 93.9 (42.6) 23.6 (600) 36.0 (915) A2769XXC X (52.0) 27U 52.5 (1333) 39.4 (1000) A2761XXC X (62.5) 26.6 (675) A (76.2) 31.5 (800) 36.0 (915) A (86.2) 39.4 (1000) A (96.1) 26.6 (675) A3966XXC X (54.6) 23.6 (600) 36.0 (915) A3969XXC X (64.6) 39U 73.5 (1867) 39.4 (1000) A3961XXC X (74.5) 26.6 (675) A3986XXC X (68.5) 31.5 (800) 36.0 (915) A3989XXC X (78.2) 39.4 (1000) A3981XXC X (98.1) 26.6 (675) A4266XXC X (57.6) 23.6 (600) 36.0 (915) A4269XXC X (67.6) 39.4 (1000) A4261XXC X (77.5) 47.2 (1200) A4262XXC X (87.5) 42U 78.7 (2000) 26.6 (675) A4286XXC X (71.2) 31.5 (800) 36.0 (915) A4289XXC X (81.2) 39.4 (1000) A4281XXC X (91.2) 47.2 (1200) A4282XXC X (101.1) 26.6 (675) A4566XXC X (62.5) 23.6 (600) 36.0 (915) A4569XXC X (72.6) 39.4 (1000) A4561XXC X (82.5) 45U 84.0 (2133) 47.2 (1200) A4562XXC X (92.5) 26.6 (675) A4586XXC X (76.2) 31.5 (800) 36.0 (915) A4589XXC X (86.2) 39.4 (1000) A4581XXC X (96.1) 47.2 (1200) A4582XXC X (106.1) 26.6 (675) A4766XXC X (62.5) 23.6 (600) 36.0 (915) A4769XXC X (72.6) 39.4 (1000) A4761XXC X (82.5) 47U 87.5 (2222) 47.2 (1200) A4762XXC X (92.5) 26.6 (675) A4786XXC X (76.2) 31.5 (800) 36.0 (915) A4789XXC X (86.2) 39.4 (1000) A4781XXC X (96.1) 47.2 (1200) A4782XXC X (106.1) * Overall frame height is based on frame mounted on standard nylon foot For jacking feet add 0.6 (15.4mm). For castors add 2.8 (70.9mm). For plinths add 4.1 (104.9mm) Denotes non-stocked size. X - Denotes Options Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 39

42 Component Assembly Specification & Part Numbers Mounting Angle Only Options The Access range is available with a range of mounting angles options that can be configured in the basic cabinet frame assembly as indicated on pages 25 & 28. If required, individual rails can be ordered separately as detailed below. Each rail assembly is supplied complete with standard fixings for mounting to the Access cabinet basic frame. Vertical 19-Inch Mounting Angles Part Number AVM22 AVM27 AVM39 AVM42 AVM47 Description 22U Square pierced 19-inch mounting angles (pair) 27U Square pierced 19-inch mounting angles (pair) 39U Square pierced 19-inch mounting angles (pair) 42U Square pierced 19-inch mounting angles (pair) 47U Square pierced 19-inch mounting angles (pair) Finish: Painted standard silver. Part Number AVM22T AVM27T AVM39T AVM42T AVM47T Description 22U Pre-tapped 19-inch mounting angles (pair) 27U Pre-tapped 19-inch mounting angles (pair) 39U Pre-tapped 19-inch mounting angles (pair) 42U Pre-tapped 19-inch mounting angles (pair) 47U Pre-tapped 19-inch mounting angles (pair) ETSI Part Number EVM39E EVM42E EVM47E Description Access 39U compatible ETSI mounting angle 69SU (pair) Access 42U compatible ETSI mounting angle 74SU (pair) Access 47U compatible ETSI mounting angle 83SU (pair) Finish: Painted standard silver. Vertical 19-Inch Mounting Angles With RCM+ Part Number AVM22RCM AVM27RCM AVM39RCM AVM42RCM AVM47RCM Description 22U 19-inch square pierced mounting angle with RCM+ fingers (pair) 27U 19-inch square pierced mounting angle with RCM+ fingers (pair) 39U 19-inch square pierced mounting angle with RCM+ fingers (pair) 42U 19-inch square pierced mounting angle with RCM+ fingers (pair) 47U 19-inch square pierced mounting angle with RCM+ fingers (pair) Finish: Painted standard silver. Notes All rails are finished painted flat silver with printed unit height markings on all 19-inch mounting rails (marked bottom to top) Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 40

43 Component Assembly Specification & Part Numbers Vertical Intermediate Rail Mounting Angle Only Options Part Number IMP22 IMP27 IMP39 IMP42 IMP47 Description Access 22U vertical intermediate rail (each) Access 27U vertical intermediate rail (each) Access 39U vertical intermediate rail (each) Access 42U vertical intermediate rail (each) Access 47U vertical intermediate rail (each) Finish: Painted standard silver. IMP Rails provide a side mounting facility mounted on the Access central extrusions. The rail provides a central support position for any heavy full depth equipment. 600mm Wide Server Beam Part Number ASB600 Description Access cabinet 600mm wide server beam (each) Finish: Painted standard silver. 800mm Wide Adaptor Channel Part Number AA8 Description Access cabinet 800mm wide adaptor channel (each) Finish: Painted standard silver. Full Width to 19-Inch Adaptor Plates Part Number AFWA2AS AFWA3AS AFWA6AS AFWA12AS Description Access cabinet full width to 19-inch adaptor plates 2U (supplied in pairs) Access cabinet full width to 19-inch adaptor plates 3U (supplied in pairs) Access cabinet full width to 19-inch adaptor plates 6U (supplied in pairs) Access cabinet full width to 19-inch adaptor plates 12U (supplied in pairs) Finish: Painted standard silver. Full width to 19-inch adaptors are only compatible with the Access 31.5 (800mm) wide range with the mounting rails set in full width configuration. Supplied complete with hardware and assembly instructions. ETSI to 19-Inch Adaptor Plates Part Number AEAP2AS AEAP3AS Description Access cabinet ETSI to 19-inch adaptor plates 2U (supplied in pairs) Access cabinet ETSI to 19-inch adaptor plates 3U (supplied in pairs) ETSI to 19-inch adaptors allow both ETSI and 19-inch mounted equipment to be configured in the same cabinet frame. Supplied complete with fixings and assembly instructions. Finish: Painted standard silver. Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 41

44 Component Assembly Specification & Part Numbers Cabinet Base Mounting Options The Access cabinet is fitted with Nylon feet as standard which protrude 0.4 (10mm) below the bottom of the Access frame. The Access range offers the ability to configure the bottom of the cabinet with a range of mounting and fixing options, details of which are shown below. Part Description Bolt Down Jacking Castors Jacking Number Facility Feet Feet & Castors Access universal APKCPK corner adaptor * plates (Set of 4) Castor Installed With Jacking Feet * The universal corner adaptor plate requires an adaptor kit to allow jacking feet and castors to be fitted at the same time please order kit AUCPAK in addition to the adaptor plates. Universal Corner Plate + Castor These simply bolt onto either the standard or universal corner adaptor plates increasing the overall height of the cabinet by 3 (77.9mm). The castors are supplied in set of four and come with a screw in brake facility. Castor Kit Order Code Description ACK Access castor kit (Set of 4) Universal Corner Plate + Jacking Foot Like the castors these simply bolt onto the universal corner adaptor plates providing the ability to level the cabinet when mounted onto uneven surfaces. Increases the overall height of the cabinet by 0.6 (15.4mm). Jacking Foot Kit Order Code Description AJF Access jacking foot kit (Set of 4) Standard Plinth Kit The standard plinth kit comprises of four special corner adaptor plates which bolt to the underside of the cabinet raising the cabinet by a nominal 4.1 (104.9mm). Each corner adaptor allows jacking feet and/or castors to be mounted and provides the fixing points for the removable kick plates which screw fix onto the front, rear and sides. Plinth Kit * Please Note - The plinth kit requires either jacking feet or castors to be mounted to the corner adaptor plates before it can support the cabinet s weight. Part Part Number Cabinet Number (Inc. Jacking Feet) Size AMP66* AMP66JF 23.6 (600mm) Wide x 26.6 (675mm) Deep AMP69* AMP69JF 23.6 (600mm) Wide x 36.0 (915mm) Deep AMP61* AMP61JF 23.6 (600mm) Wide x 39.4 (1000mm) Deep AMP62* AMP62JF 23.6 (600mm) Wide x 47.2 (1200mm) Deep AMP64* AMP64JF 23.6 (600mm) Wide x 55.1 (1400mm) Deep AMP86* AMP86JF 31.5 (800mm) Wide x 26.6 (675mm) Deep AMP89* AMP89JF 31.5 (800mm) Wide x 36.0 (675mm) Deep AMP81* AMP81JF 31.5 (800mm) Wide x 39.4 (1000mm) Deep AMP82* AMP82JF 31.5 (800mm) Wide x 47.2 (1200mm) Deep AMP84* AMP84JF 31.5 (800mm) Wide x 55.1 (1400mm) Deep Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 42

45 Component Assembly Specification & Part Numbers Stabilizing Plinth Kit Like the standard plinth, the stabilizing plinth kit comprises of special corner adaptor plates with jacking foot and/or castor provision. The rear and side kick plates simply screw to the corner plates while the front kick plate pulls out to reveal a stabilizing bar. The stabilizing bar can be retracted after use to avoid potential trip hazards. The standard assembly includes two jacking feet fitted to the stabilizing bar but requires either jacking feet or castors to be fitted to the corner plates before the plinth assembly can support the cabinet s weight. The jacking feet and castors should be ordered separately. Nominally the plinth assembly increases the overall height of the cabinet by 4.1 (104.9mm). Stabilizing Plinth Kit Part Part Number Cabinet Number (Inc. Jacking Feet) Size SAM66 SAM66JF 23.6 (600mm) Wide x 26.6 (675mm) Deep SAM69 SAM69JF 23.6 (600mm) Wide x 36.0 (915mm) Deep SAM61 SAM61JF 23.6 (600mm) Wide x 39.4 (1000mm) Deep SAM62 SAM62JF 23.6 (600mm) Wide x 47.2 (1200mm) Deep SAM64 SAM64JF 23.6 (600mm) Wide x 55.1 (1400mm) Deep SAM86 SAM86JF 31.5 (800mm) Wide x 26.6 (675mm) Deep SAM89 SAM89JF 31.5 (800mm) Wide x 36.0 (675mm) Deep SAM81 SAM81JF 31.5 (800mm) Wide x 39.4 (1000mm) Deep SAM82 SAM82JF 31.5 (800mm) Wide x 47.2 (1200mm) Deep SAM84 SAM84JF 31.5 (800mm) Wide x 55.1 (1400mm) Deep * Please Note - The plinth kit requires either jacking feet or castors to be mounted to the corner adaptor plates before it can support the cabinet s weight. Computer Floor Plinth The Access computer floor plinth has been designed to mount to the pedestals of most conventional raised floor structures. Available in a range of layouts and sizes, the plinth structure nominally allows cabinets to sit of a single tile depth (47.2 (1200mm) and 55.1 (1400mm) deep cabinets sit on two tiles depth wise). Although the cabinet nominally overlaps the tiles immediately in front and behind, the plinth securely raises the cabinet slightly above the floor level. This allows the tiles to the front or rear of the cabinet to be easily removed even when the cabinets are fully loaded. The number of tiles on the width is variable and depends on the number of cabinets per plinth. Where the plinth layout does not match an exact tile spacing, the plinth includes an adjustable angle to support the cut tile. Each assembly is supplied complete with all applicable fixings and clamp brackets. A range of blanking options are available and these can be tailored to meet the needs of individual installations or cabinet layouts. This system offers potential savings as the plinth simply replaces the normal tile. By doing this, it avoids the costly cutting of tiles. The system also allows cabinets to be bayed closely together avoiding creep in layouts and maximizing space within the data room Remove floor tiles 4 Secure plinth to floor Secure stringers if needed 5 Place and secure cabinet Fit Plinth into opening Cabinet Cabinet Single Two Three Four Width Depth Bay Bay Bay Bay in. (mm) in. (mm) Option Option Option Option A6FP61 A6FP62 A6FP63 A6FP A6FP91 A6FP92 A6FP93 A6FP A6FP101 A6FP102 A6FP103 A6FP A6FP121 A6FP122 A6FP123 A6FP A6FP141 A6FP142 A6FP143 A6FP A8FP61 A8FP62 A8FP A8FP91 A8FP92 A8FP A8FP101 A8FP102 A8FP A8FP121 A8FP122 A8FP A8FP141 A8FP142 A8FP143 - Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 43

46 Component Assembly Specification & Part Numbers Base Panel Options The open frame design of Cooper B-Line s Access cabinet provides unrivaled cable entry capability thanks to its tubular center frame design. While this scenario can be ideal for some applications, other installations require the top and bottom cabinet open areas to be blanked off to reduce the ingress of dust or to control the thermal characteristics within the cabinet. The Access cabinet base blanking panel system provides a configurable solution capable of being tailored to meet the demands of individual applications. The assembly comprises a fixed frame, which then accommodates the mounting of a range of blanking panel or air ducting options. The number of panel spaces is dependent on the depth of the cabinet with details indicated below. The base frames can be fitted with or without either the nylon skids or jacking feet. Just bolt to the underside of the base cabinet frame. The 31.5 (800mm) wide variant provides a brush strip entry front to rear offering a cable opening size of 19.7 (500mm) x 2.1 (53mm). With the center blanking panels removed, the 31.5 (800mm) wide variant also offers the ability to slide the brush strip sections in board providing cabling clearance of 9.1 (230mm) to ease cabling installation. For applications where the cabinet will be mounted on a level raised floor structure, the standard nylon skids can be removed allowing the cabinet frame to sit directly onto the floor. This provides a seal between the floor and the cabinet eliminating the problem of trying to manage the sealing of the floor void at the tile level. In this configuration, the brush strip cable entries in the base blanking panels effectively provide sealing around the cable bundles. Frame Assemblies Part Cabinet Width Cabinet Depth Blanking Number in. (mm) in. (mm) Locations ACBBF606B 26.6 (675) 2 ACBBF610B 23.6 (600) 39.4 (1000) 4 ACBBF612B 47.2 (1200) 5 ACBBF614B 55.1 (1400) 6 ACBBF806B 26.6 (675) 2 ACBBF810B 31.5 (800) 39.4 (1000) 4 ACBBF812B 47.2 (1200) 5 ACBBF814B 55.1 (1400) 6 * Please Note Base panel assemblies are available as standard finished in black RAL 9005 only. Panels shown light gray finish for clarity only. Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 44

47 Component Assembly Specification & Part Numbers Blanking Assemblies Description Blanking Value Part Number Supplied with quick fit 1/4 turn tool-less fasteners 1 ACBBPPB allowing easy fitting. Simply align the panel with the corresponding holes in the base frame and secure in position using the captive hardware to provide an effective blanking solution. Plain Blanking Panel Brush Strip Blanking Panel Like the plain blanking panels, these units take up 1 ACBBBPB one unit space and also incorporate the same tool-less 1 /4 turn fasteners. The brush strip blanking panels offer a cabling opening of 13.8 (350mm) x 2.5 (64mm) and can be fitted with the brush facing the front or rear of the cabinet. Two panels can be mounted with the brush on the mating joint providing a cabling opening of 13.5 (350mm) x 5 (128mm). Air Deflector Cowl The deflector cowl has been designed to control the 2 ACBBDAB air flow from the floor void immediately under the cabinet. The cowl directs the air to the area in front of the 19-inch mounting angles ensuring that the cold air can effectively feed the cooling requirements for a normally aspirated piece of active equipment. The air damper incorporated in the unit allows the user to balance the air flow to the cabinet allowing fine tuning of groups of cabinets. This unit takes up two unit blanking spaces and mounts in the bottom 3U of the cabinet. Designed to be used in conjunction with the 2U 2 ACBBSFDB Scavenger fan tray this unit takes up the two blanking spaces. Like the blanking panels the duct simply aligns with the corresponding holes in the base frame and secures in position using the captive tool-less 1 /4 turn fasteners. Scavenger Fan Tray Duct 2U Scavenger Fan tray The 2U Scavenger Fan Tray simply mounts into 2 See pages the bottom 2U of the cabinet and rests on the for details Scavenger fan tray cowl. Scavenger fan tray protrudes through the 19-inch opening by approximately 4 (100mm) and is designed, like the air deflector, to pull cold air from the floor void immediately under the cabinet and feed the cold air to the area in front of the 19-inch mounting angles. For further details of the fan tray please see pages Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 45

48 Component Assembly Specification & Part Numbers Top Panel Options Designed for exceptional flexibility by using separate interchangeable panels The panels can be fitted in various positions, giving you a wide choice of combinations to suit your application. Panels can be completely removed for a totally open cable access area if required. For optimum forced air cooling, fans are offset within the panel. The tray can then be rotated through 180 to fine tune the cooling system when equipment is mounted within the cabinet. Cabinet Depth Total Standard Infill Panels in. (mm) Panels Panel Required 26.6 (675mm) (915mm) (1000mm) (1200mm) (1400mm) Plain Top Panel Vented Top Panel Brush Strip Top Panel Top Panel Part Number Cabinet Width Shipping Wt. Style See Chart below to Complete Part # in. (mm) lbs. (kg) ATP 6 _ 23.6 (600) 4.0 (1.8) Plain ATP 7 _ 27.6 (700) 4.4 (2.0) ATP 8 _ 31.5 (800) 4.8 (2.2) ATP V6 _ 23.6 (600) 2.6 (1.2) Vented ATP V7 _ 27.6 (700) 3.0 (1.3) ATP V8 _ 31.5 (800) 3.3 (1.5) ATP BS6 _ 23.6 (600) 4.2 (1.9) Brush Strip Entry ATP BS7 _ 27.6 (700) 4.5 (2.1) ATP BS8 _ 31.5 (800) 4.8 (2.2) ATPEBS6 _ 23.6 (600) 4.2 (1.9) Enhanced Brush ATPEBS7 _ 27.6 (700) 4.4 (2.0) Strip Top Panel ATPEBS8 _ 31.5 (800) 5.0 (2.3) ATPBSK _ (0.4) Infill for Cab. ATP I 69 _ 23.6 (600) 7.0 (3.2) Depth 36.0 ATP I 79 _ 27.6 (700) 7.5 (3.4) (915mm) ATP I 89 _ 31.5 (800) 7.9 (3.6) Infill for Cab. ATP I 6 _ 23.6 (600) 8.6 (3.9) Depth 47.2 ATP I 7 _ 27.6 (700) 9.0 (4.1) (1200mm) ATP I 8 _ 31.5 (800) 9.4 (4.3) Enhanced Brush Strip Top Panel Color Scheme Options A = Light Gray B = Black Infill Panel Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 46

49 Component Assembly Specification & Part Numbers Overview Thermal management within 19 cabinets has always proved challenging. The Access cabinet range provides effective natural convection cooling within its core design. Where additional forced cooling is necessary, Cooper B-Line offers a range of complementary products to enhance system cooling. Roof Mounted Fan Trays Description Part Width Number in. (mm) 2-Way Fan Tray 230v AC A6FT_ 23.6 (600) A8FT_ 31.5 (800) 3-Way Fan Tray 230v AC A6FT3_ 23.6 (600) A8FT3_ 31.5 (800) 2-Way Fan Tray 110v AC ATP62_ 23.6 (600) ATP82_ 31.5 (800) 3-Way Fan Tray 110v AC ATP63_ 23.6 (600) ATP83_ 31.5 (800) Part Numbers denote products finished standard light gray and blue Roof Mounted Fan Trays Features: Replaces vented or plain top panels Simple 2 fastener hardware Can be turned 180 o Can be fitted at front, center and rear (center on 36.0 (915mm) or deeper cabinets only) Fan Specification: Airflow cubic feet (160 cubic meters) per hour Speed rpm Current amps Noise Level - 42dB Color Scheme Options A = Light Gray B = Black Thermally Controlled & Monitored Roof Fan trays Part Cabinet Description Number Width in. (mm) Monitored Fan Tray A6FTECM_ 23.6 (600) Monitored Fan Tray A8FTECM_ 31.5 (800) Part Numbers denote products finished standard light gray and blue Color Scheme Options A = Light Gray B = Black Thermally Controlled and Monitored Fan Trays Constantly monitoring its surroundings and adjusting fan speed by temperature, the Monitored Roof Fan Tray is available in 23.6 (600mm) and 31.5 (800mm) wide versions and represents the latest capabilities in thermal management. Features: Replaces vented or plain top panels Simple two fastener hardware Can be turned 180 o Can be fitted at front, center and rear (center on 35 (875mm) or deeper racks only) Dual thermostat control Volt-free relay output and tri-color LED for alarm outputs Fan failing alarm Thermostat failure and over-temperature alarm User programmable temperature settings Technical Overview: Constructed of powder coated 18 gauge steel Fan Specification: Speed - Variable Noise level - Variable Voltage - 100/230V AC input - 12V DC fans Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 47

50 Component Assembly Specification & Part Numbers Side Panel Options Side panels are supplied as a twin set per side Split depth for space saving and easy access Pivots left or right on internal quick release latches Lightweight, easily removed A PSP 47 6 A Access Panel Type PSP = Plain Side Panel VSP* = Vented Side Panel Unit Height 47 = 47U 42 = 42U 39 = 39U 27 = 27U 22 = 22U Unit Depth 6 = 26.6 (675mm) 9 = 36.0 (915mm) 1 = 39.4 (1000mm) 2 = 47.2 (1200mm) 4 = 55.1 (1400mm) * Vented Side Panels are only available in 42U and 47U heights and in depths of 875mm, 1000mm and 1200mm. Color Scheme Options A = Light Gray B = Black Unit Height Part Number Depth Shipping Wt. See Chart above to EIA Mtg. Units in. (mm) lbs. (kg) Complete Part # A _ 47 6 _ 26.6 (675) 32.6 (14.8) A _ 47 9 _ 36.0 (915) 44.3 (20.1) 47U A _ 47 1 _ 39.4 (1000) 48.5 (22.0) A _ 47 2 _ 47.2 (1200) 58.2 (26.4) A _ 47 4 _ 55.1 (1400) 67.9 (30.8) A _ 42 6 _ 26.6 (675) 29.3 (13.3) A _ 42 9 _ 36.0 (915) 39.9 (18.1) 42U A _ 42 1 _ 39.4 (1000) 43.6 (19.8) A _ 42 2 _ 47.2 (1200) 52.2 (23.7) A _ 42 4 _ 55.1 (1400) 61.0 (27.7) A _ 39 6 _ 26.6 (675) 27.3 (12.4) 39U A _ 39 9 _ 36.0 (915) 37.2 (16.9) A _ 39 1 _ 39.4 (1000) 40.7 (18.5) A _ 27 6 _ 26.6 (675) 19.6 (8.9) 27U A _ 27 9 _ 36.0 (915) 26.6 (12.1) A _ 27 1 _ 39.4 (1000) 29.1 (13.2) 22U A _ 22 6 _ 26.6 (675) 16.3 (7.4) Plain Side Panel Vented Side Panel Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 48

51 Component Assembly Specification & Part Numbers Door Options Access Door Part Codes AAD476ACL Access Side Panel Unit Height 47 = 47U 27 = 27U 42 = 42U 22 = 22U 39 = 39U 32 = 32U Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Access Acrylic Door Door Type AD = Acrylic Glass Door LH BD = Acrylic Glass Door RH CT = Access Cover Trims GD = Glass Door (Vented Styles) LH FD = Glass Door (Vented Styles) RH HFD = High Flow Server Door With Metal Trims LH HGD = High Flow Server Door With Metal Trims RH VPD = Pressurized Rear Door LH VRD = Pressurized Rear Door RH SD = Plain Steel Door LH TD = Plain Steel Door RH VSD = Vented Steel Door LH WSD = Vented Steel Door RH DGD = Wardrobe Style Double Glass Doors DSD = Wardrobe Style Double Plain Steel Doors ZD = Wardrobe Style Double Vented Steel Doors DSG = Wardrobe Style Double Glazed Doors Cabinet Width 6 = 600mm 8 = 800mm Config. / Color Scheme A = Light Gray + Blue Trim AS = Light Gray + Blue Trim B = Black + Black Trim BAS = Black + Black Trim C = Light Gray + Black Trim D = Black + Blue Trim G = Light Gray + Mid Gray Trim Latch Handle Type Blank = Std Swing Handle CL = Combination LockSwing Handle EL = Euro Lock Swing Handle (no insert) IP = i-pal Swing Handle The Access Cabinet Acrylic Glass Door is made up of a door frame with a 0.16 (4mm) smoke gray Perspex window clamped into the glass opening. Door features are as follows; Doors can be supplied left hand (AAD series) or right hand (ABD series) hinged Supplied with two point locking espan assembly latching into the cabinet frame top and bottom Fitted with keyed swing handle as standard Other locking options available including: Euro profile inserts, mechanical combination swing handle and i-pal electronic lock 23.6 (600mm) Wide Door Unit Height Part Number Width Shipping EIA Mtg. See Chart above to Complete Part # Weight Units in. (mm) lbs. (kg) 47U A _ 47 6 BAS _ 23.6 (600) 44.5 (20.2) 42U A _ 42 6 BAS _ 23.6 (600) 39.7 (18.0) 39U A _ 39 6 BAS _ 23.6 (600) 33.0 (15.0) 27U A _ 27 6 BAS _ 23.6 (600) 13.0 (5.9) 31.5 (800mm) Wide Door Unit Height Part Number Width Shipping EIA Mtg. See Chart above to Complete Part # Weight Units in. (mm) lbs. (kg) 47U A _ 47 8 BAS _ 31.5 (800) 55.5 (25.2) 42U A _ 42 8 BAS _ 31.5 (800) 49.6 (22.5) 39U A _ 39 8 BAS _ 31.5 (800) 41.2 (18.7) 27U A _ 27 8 BAS _ 31.5 (800) 16.1 (7.3) Sample code for a left hand hinged 42U x 23.6 (600mm) wide assembly with standard locking AAD426B 49

52 Access Cover Trims The Access Cabinet Cover Trims provide the ideal solution when constant access is required to the 19-inch equipment. Comprises of two vertical hinged styles, the cover trims are simply secured in the closed position using simple magnets top and bottom Cover trims allow vertical cabling to be discreetly covered leaving full view of the complete 19-inch opening Unit Height Part Number Width Shipping EIA Mtg. Weight Units in. (mm) lbs. (kg) 47U ACT476 _ 23.6 (600) 15.0 (6.8) 42U ACT426 _ 23.6 (600) 13.4 (6.1) 39U ACT396 _ 23.6 (600) 12.5 (5.7) 47U ACT478 _ 31.5 (800) 15.0 (6.8) 42U ACT428 _ 31.5 (800) 13.4 (6.1) 39U ACT398 _ 31.5 (800) 12.5 (5.7) Sample code for a 42U x 31.5 (800mm) wide assembly - finished Black with Black trim is ACT428B Color Scheme Options A = Light Gray B = Black Access Standard Glass Doors The standard Access Cabinet Glass Door is made up of two vertical vented door styles with a piece of 0.16 (4mm) tinted toughened glass structurally bonded to the styles. The vertical vent pattern on each of the doors styles provides some air flow into the cabinet but of applications where active equipment is deployed it is recommended that the Access Vented Steel Door or the Access High Flow Server Door is specified. Features include; Color coded hardware incorporating quick release hinge mechanisms Doors can be supplied left hand (AGD series) or right hand (AFD series) hinged Supplied with two point locking espan assembly latching into the cabinet frame top and bottom Fitted with keyed swing handle as standard Other locking options available including: Euro profile inserts, mechanical combination swing handle and i-pal electronic lock Unit Height Part Number Width Shipping EIA Mtg. Weight Units in. (mm) lbs. (kg) 47U A 476BAS _ 23.6 (600) 35.2 (16.0) 42U A 426BAS _ 23.6 (600) 31.5 (14.3) 39U A 396BAS _ 23.6 (600) 29.3 (13.3) 27U A 276BAS _ 23.6 (600) 20.3 (9.2) 22U A 226BAS _ 23.6 (600) 16.5 (7.5) 47U A 478BAS _ 31.5 (800) 46.9 (21.3) 42U A 428BAS _ 31.5 (800) 42.1 (19.1) 39U A 398BAS _ 31.5 (800) 39.0 (17.7) 27U A 278BAS _ 31.5 (800) 27.1 (12.3) 22U A 228BAS _ 31.5 (800) 22.0 (10.0) Sample code for a left hand hinged 42U x 23.6 (600mm) wide assembly with standard locking finished Black with Black trim is AGD426BAS Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 50

53 Component Assembly Specification & Part Numbers Access Wardrobe Style Double Glass Doors The Access Cabinet Wardrobe Style Double Glass Door assembly is made up of two door sections, each comprising of two vertical door styles with a piece of 0.16 (4mm) tinted toughened glass structurally bonded to the styles. Door features are as follows; Right hand door section traps the left hand door section as standard Supplied with two point locking espan assembly latching behind the cabinet frame top and bottom Fitted with keyed swing handle as standard Other locking options available including: Euro profile inserts, mechanical combination swing handle and i-pal electronic lock Unit Height Part Number Width Shipping Weight EIA Mtg. Units in. (mm) lbs. (kg) 47U ADGD476BAS _ 23.6 (600) 39.4 (17.9) 42U ADGD426BAS _ 23.6 (600) 35.3 (16.0) 39U ADGD396BAS _ 23.6 (600) 32.8 (14.9) 47U ADGD478BAS _ 31.5 (800) 52.4 (23.8) 42U ADGD428BAS _ 31.5 (800) 46.9 (21.3) 39U ADGD398BAS _ 31.5 (800) 43.4 (19.7) Sample code for a left hand hinged 42U x 23.6 (600mm) wide assembly with standard locking finished Black with Black trim is ADGD426BAS Access High Flow Server Door Equipment cooling continues to be one of the most important challenges that IT technicians and data center manager s face today. The Access Cabinet High Flow Server Doors are designed to maintain critical enclosure security, while at the same time providing volume airflow for the essential thermal management of active equipment. By using a combination of high density perforated sheet, forming the door in a bowed corrugation our engineers have been able to design a range doors to offer a minimum of 84% free area in relation to the free opening through the 19-inch mounting angles. These doors can be retro fitted to existing Access Cabinets deployed in the field and can be hung either left or right hand hinged utilizing the same convenient quick fit hinge found on our standard doors. In addition, these doors are fully compatible with our range of standard swing handle locks, mechanical combination locks and i-pal electronic locks continuing our evolution of modular solutions designed to grow with demand. As well as the thermal benefits, the Access Cabinet High Flow Server Door range also offers an aesthetically pleasing product with functional benefits. Doors can be supplied with the option of either blue or black color coded moulded trims or customer configurable metal trims. The metal trims offer the opportunity to easily achieve customer centric branding or the ability to easily distinguish and identify a cabinet s function.the formed bowed door also offers additional clearance between the face of the 19-inch mounting angles and the inside face of the door ensuring that active equipment is able to operate in the most efficient way. Features include; Doors can be supplied left hand (AHFD series) or right hand (AHGD series) hinged Supplied with two point locking espan assembly latching into the cabinet frame top and bottom Fitted with keyed swing handle as standard Other locking options available including: Euro profile inserts, mechanical combination swing handle and i-pal electronic lock Unit Height Part Number Width Shipping Weight EIA Mtg. Units in. (mm) lbs. (kg) 47U AH_D476BAS _ 23.6 (600) 30.8 (14.0) 42U AH_D426BAS _ 23.6 (600) 28.0 (12.7) 27U AH_D276BAS _ 23.6 (600) 19.2 (8.7) 47U AH_D478BAS _ 31.5 (800) 33.9 (15.4) 42U AH_D428BAS _ 31.5 (800) 30.8 (14.0) 27U AH_D278BAS _ 31.5 (800) 21.6 (9.8) Sample code for a left hand hinged 42U x 31.5 (800mm) wide assembly with standard locking finished Black with Black trim is AHFD428BAS Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 51

54 Component Assembly Specification & Part Numbers Access Vented Steel Door The standard Access Cabinet Vented Steel Door has been designed to incorporate a vent pattern offering an 80% free area configuration. These doors provide the optimum solutions when configuring cabinets to meet the conventional cooling needs of low to medium density cooling applications. The percentage free area of the door is critical as the active equipment performance can be adversely affected if the flow of the cold air feed to the unit as well as the hot air exhaust are compromised. Features include; Color coded hardware incorporating quick release hinge mechanisms Doors can be supplied left hand (AVSD series) or right hand (AWSD series) hinged Supplied with two point locking espan assembly latching into the cabinet frame top and bottom Fitted with keyed swing handle as standard Other locking options available including: Euro profile inserts, mechanical combination swing handle and i-pal electronic lock Sample code for a left hand hinged 42U x 23.6 (600mm) wide assembly with standard locking finished Black with Black trim is AVSD426BAS Unit Height Part Number Width Shipping Wt. EIA Mtg. Units in. (mm) lbs. (kg) 47U A_D476BAS _ 23.6 (600) 37.0 (16.8) 42U A_D426BAS _ 23.6 (600) 33.0 (15.0) 39U A_D396BAS _ 23.6 (600) 30.6 (13.9) 27U A_D276BAS _ 23.6 (600) 21.4 (9.7) 22U A_D226BAS _ 23.6 (600) 17.4 (7.9) 47U A_D478BAS _ 31.5 (800) 49.4 (22.4) 42U A_D428BAS _ 31.5 (800) 44.1 (20.0) 39U A_D398BAS _ 31.5 (800) 41.0 (18.6) 27U A_D278BAS _ 31.5 (800) 28.4 (12.9) 22U A_D228BAS _ 31.5 (800) 23.1 (10.5) Access Wardrobe Style Double Vented Steel Doors The Access Cabinet Wardrobe Style Double Vented Steel Door assembly is made up of two half-width vented steel door sections incorporating an 80% free area mesh pattern. The percentage free area of the door is critical when active equipment is deployed into the cabinet as the equipment performance can be adversely affected if the flow of the cold air feed to the unit as well as the hot air exhaust are compromised. The assembly is configured so the left hand door section is trapped by the locking right hand door section. The wardrobe style door configuration is ideal for applications with limited space around the periphery of the cabinet. Features include; Color coded hardware incorporating quick release hinge mechanisms Right hand door section traps the left hand door section as standard Supplied with two point locking espan assembly latching into the cabinet frame top and bottom Fitted with keyed swing handle as standard Other locking options available including: Euro profile inserts, mechanical combination swing handle and i-pal electronic lock Unit Height Part Number Width Shipping Wt. EIA Mtg. Units in. (mm) lbs. (kg) 47U AZD476B _ 23.6 (600) 37.9 (17.2) 42U AZD426B _ 23.6 (600) 33.9 (15.4) 39U AZD396B _ 23.6 (600) 31.5 (14.3) 47U AZD478B _ 31.5 (800) 50.5 (22.9) 42U AZD428B _ 31.5 (800) 45.2 (20.5) 39U AZD398B _ 31.5 (800) 41.9 (19.0) Sample code for a left hand hinged 42U x 31.5 (800mm) wide assembly with standard locking finished Black with Black trim is AZD428B Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 52

55 Component Assembly Specification & Part Numbers Access Standard Plain Steel Door The standard Access Cabinet Plain Steel Door is a single piece solid steel door incorporating the standard quick release hinge and two point swing handle locking used on all the full width Access Cabinet doors. The handles and the hinge hardware are all color coded and available in range of standard colors. Features include; Color coded hardware incorporating quick release hinge mechanisms Doors can be supplied left hand (ASD series) or right hand (ATD series) hinged Supplied with two point locking espan assembly latching into the cabinet frame top and bottom Fitted with keyed swing handle as standard Other locking options available including: Euro profile inserts, mechanical combination swing handle and i-pal electronic lock Sample code for a left hand hinged 42U x 23.6 (600mm) wide assembly with standard locking finished Black with Black trim is ASD426BAS Unit Height Part Number Width Shipping Wt. EIA Mtg. Units in. (mm) lbs. (kg) 47U A_D476BAS _ 23.6 (600) 37.5 (17.0) 42U A_D426BAS _ 23.6 (600) 33.5 (15.2) 39U A_D396BAS _ 23.6 (600) 31.1 (14.1) 27U A_D276BAS _ 23.6 (600) 21.6 (9.8) 22U A_D226BAS _ 23.6 (600) 17.6 (8.0) 47U A_D478BAS _ 31.5 (800) 50.0 (22.7) 42U A_D428BAS _ 31.5 (800) 44.7 (20.3) 39U A_D398BAS _ 31.5 (800) 41.4 (18.8) 27U A_D278BAS _ 31.5 (800) 28.6 (13.0) 22U A_D228BAS _ 31.5 (800) 23.3 (10.6) Access Wardrobe Double Steel Door The standard Access Cabinet Double Plain Steel Doors are ideal for applications with limited walkway space. Features include; Color coded hardware incorporating quick release hinge mechanisms Supplied with two point locking espan assembly latching into the cabinet frame top and bottom Fitted with keyed swing handle as standard Other locking options available including: Euro profile inserts, mechanical combination swing handle and i-pal electronic lock Unit Height Part Number Width Shipping Wt. EIA Mtg. Units in. (mm) lbs. (kg) Sample code for a left hand hinged 42U x 23.6 (600mm) wide assembly with standard locking finished Black with Black trim is ADSD426BAS 47U ADSD476BAS _ 23.6 (600) 37.0 (16.8) 42U ADSD426BAS _ 23.6 (600) 33.0 (15.0) 39U ADSD396BAS _ 23.6 (600) 30.6 (13.9) 47U ADSD478BAS _ 31.5 (800) 49.4 (22.4) 42U ADSD428BAS _ 31.5 (800) 44.1 (20.0) 39U ADSD398BAS _ 31.5 (800) 41.0 (18.6) Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 53

56 Component Assembly Specification & Part Numbers Access Pressurized Rear Doors Designed to mount on the rear of the cabinet, these doors have been developed to enhance the thermal characteristics of the cabinet by efficiently and effectively expelling hot air generated within the cabinet. Comprising of four main elements the door configuration can be tailored to meet the demands of individual installation thanks to the flexible design. Outwardly the door assembly looks like a standard 80% free area vented steel door, in fact it utilizes the same hinge and locking hardware found on our standard doors. As a consequence these doors can be retro fitted to existing cabinets deployed in the field and be hung either left or right hand hinged as required. Where the pressurized door differs from the standard vented door is the addition of a frame on the rear of the door which forms an enclosed plenum when enclosed with blanking panels or fans trays (see options). Features include; Fully configurable plenum chamber Integrated vertical cable manager Doors can be configured as either left hand (AVPD series) or right hand (AVRD series) hinged Supplied with two point locking espan assembly latching into the cabinet frame top and bottom Fitted with keyed swing handle as standard Other locking options available including: Euro profile inserts, mechanical combination swing handle and i-pal electronic lock Unit Height Part Number Width Shipping Weight EIA Mtg. Units in. (mm) lbs. (kg) 47U A D476B _ 23.6 (600) 54.4 (24.7) 42U A D426B _ 23.6 (600) 49.4 (22.4) 47U A D478B _ 31.5 (800) 67.0 (30.3) 42U A D428B _ 31.5 (800) 60.4 (27.4) Sample code for a left hand hinged 42U x 31.5 (800mm) wide assembly with standard locking finished Black with Black trim is AVPD428B Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 54

57 Component Assembly Specification & Part Numbers Pressurized Rear Door Fan Tray Assembly Although not 19-inch compliant, the fan trays themselves are 3U in height and are fitted with two 4.7 (120mm) square fans each rated at 79 CFM. Utilizing quick fit tool-less quarter turn fasteners these fan trays can be easily positioned to allow the tailored management of hot spot conditions. Power cord to be ordered separately. Voltage Part Number Finish Width Shipping Weight in. (mm) lbs. (kg) 230v A/C A6PD3U220FTA Lt. Gray 23.6 (600) 3.6 (1.6) 110v A/C A6PD3U110FTA Lt. Gray 23.6 (600) 3.6 (1.6) 230v A/C A8PD3U220FTA Lt. Gray 31.5 (800) 4.3 (1.9) 110v A/C A8PD3U110FTA Lt. Gray 31.5 (800) 4.3 (1.9) 230v A/C A6PD3U220FTB Black 23.6 (600) 3.6 (1.6) 110v A/C A6PD3U110FTB Black 23.6 (600) 3.6 (1.6) 230v A/C A8PD3U220FTB Black 31.5 (800) 4.3 (1.9) 110v A/C A8PD3U110FTB Black 31.5 (800) 4.3 (1.9) Pressurized Rear Door Blanking Panel Options Like the fan trays, the blanking panels are not 19-inch compliant but are available in 1U or 2U height options. Used in conjunction with the fan trays, the blanking panels can be used to seal off any unused opening in the door plenum, preventing the hot air being drawn out of the back of the cabinet by the fans from re-entering or recirculating in the rear of the cabinet. The panels utilize quick fit tool-less quarter turn fasteners for quick and easy installation. Size Part Number Finish Width Shipping Weight in. (mm) lbs. (kg) 1U A6PDBP1UA Lt. Gray 23.6 (600) 0.8 (0.36) 2U A6PDBP2UA Lt. Gray 23.6 (600) 1.3 (0.59) 1U A8PDBP1UA Lt. Gray 31.5 (800) 1.0 (0.45) 2U A8PDBP2UA Lt. Gray 31.5 (800) 1.7 (0.77) 1U A6PDBP1UB Black 23.6 (600) 0.8 (0.36) 2U A6PDBP2UB Black 23.6 (600) 1.3 (0.59) 1U A8PDBP1UB Black 31.5 (800) 1.0 (0.45) 2U A8PDBP2UB Black 31.5 (800) 1.7 (0.77) Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 55

58 Component Assembly Specification & Part Numbers Shelf Options Chassis Support Fix directly between front/rear 19-inch mounting angles providing additional support to 19-inch mounted units. Particularly useful when deploying cantilever mounted equipment of any depth. Finish: Painted standard silver. Load Rating: 77 Lbs. (35kg) Part Description Cabinet Depth Number in. (mm) CR39 Chassis runners (2off) 15.0 (380) CR45 Chassis runners (2off) 17.5 (444) CR58 Chassis runners (2off) 22.5 (571) CR62 Chassis runners (2off) 24.7 (627) Cantilever Shelf 17 1 /2 (444mm) Keyboard Shelves L 15 (381mm) Designed to support small monitors, desktop hubs and switches. Installs in 2U. Load Rating: 60 Lbs. (27.2kg) Part Number Min. Cabinet Depth Weight lbs. (kg) E2SHCLSLP1915P Fits all Cabinet Depths 5.0 (2.20) Color Scheme Options A = Light Gray B = Black Sliding and tilting shelves designed to support 19 (482mm) keyboards. Shelf installs in 2U. Load Rating: 20 lbs. (9.1kg) Part Number EIA Mounting L Weight Width in. in. (mm) lbs. (kg) E2SHKBS (416) 10.0 (4.5) E2SHKBS (517) 11.0 (5.0) Keyboard Shelf with Mouse Tray Color Scheme Options A = Light Gray B = Black These sliding and tilting shelves are designed to support keyboards and features an articulating mouse tray. Shelf installs in 2U. Load Rating: 20 lbs. (9.1kg). Part Number EIA Mounting L Weight Width in. in. (mm) lbs. (kg) L E2SHKBSLPM (416) 11.2 (5.1) E2SHKBSLPM (517) 12.2 (5.6) Color Scheme Options A = Light Gray B = Black 56

59 Component Assembly Specification & Part Numbers Shelf Options Sliding/Swivel Keyboard & Monitor Shelf This Sliding/Swivel Keyboard and Monitor Shelf is designed to support large main frame type keyboards and CRT monitors. Shelf installs in 2U. Load Rating: 200 lbs. (90.7kg). Nominal Shelf Depth Part Number EIA Mounting Nominal Shelf Weight Width Depth in. in. (mm) lbs. (kg) E2SHKBS2U (533) 34.5 (15.6) E2SHKBS2U (609) 36.7 (16.6) E2SHKBS2U (762) 41.5 (18.8) Color Scheme Options A = Light Gray B = Black 15 3 /4 (400mm) 18 7 /8 (479mm) This Sliding/Swivel Keyboard Shelf is designed to support main frame type keyboards. Shelf installs in 1U. Load Rating: 50 lbs. (22.7kg). Sliding/Swivel Keyboard Nominal Shelf Depth Part Number EIA Mounting Nominal Shelf Weight Width Depth in. in. (mm) lbs. (kg) E2SHKBSR1U (533) 28.8 (13.0) E2SHKBSR1U (609) 30.4 (13.8) E2SHKBSR1U (762) 33.7 (15.3) Color Scheme Options A = Light Gray B = Black 15 3 /4 (400mm) 18 7 /8 (479mm) 57

60 Component Assembly Specification & Part Numbers Shelf Options Fixed & Sliding Shelves Access cabinet Fixed and Sliding Shelves feature a flow-through perforated design for maximum equipment ventilation. All Fixed and Sliding Shelves feature adjustable shelf mounting brackets that can adapt to all rail depths. Sliding Shelves can be fully extended for easy access to equipment. Shelves are manufactured from 14 gauge (2.0mm) steel. Fixed Shelves Sliding Shelves Color Scheme Options A = Light Gray B = Black Load Rating 150 lbs. (68kg) Load Rating 350 lbs. (159kg) Load Rating 150 lbs. (68kg) Load Rating 350 lbs. (159kg) Minimum Maximum Part Number Cabinet Rail Shipping Depth Adjustment Weight in. (mm) in. (mm) lbs. (kg) E2SH4P (675) 24.5 (622) 12.0 (5.4) E2SH4P (915) 28.5 (724) 14.4 (6.5) E2SH4P (915) 34.5 (876) 18.0 (8.2) E2SH4P (1000) 40.5 (1028) 21.6 (9.8) E2SH4P (1200) 46.5 (1181) 25.2 (11.4) E2SH4P (675) 24.5 (622) 13.0 (5.9) E2SH4P (915) 28.5 (724) 15.6 (7.1) E2SH4P (915) 34.5 (876) 19.5 (8.8) E2SH4P (1000) 40.5 (1028) 23.4 (10.6) E2SH4P (1200) 46.5 (1181) 27.3 (12.4) E2SHH4P (675) 24.5 (622) 14.0 (6.4) E2SHH4P (915) 28.5 (724) 16.8 (7.6) E2SHH4P (915) 34.5 (876) 21.0 (9.5) E2SHH4P (1000) 40.5 (1028) 25.2 (11.4) E2SHH4P (1200) 46.5 (1181) 29.4 (13.3) E2SHH4P (675) 24.5 (622) 14.8 (6.7) E2SHH4P (915) 28.5 (724) 17.8 (8.1) E2SHH4P (915) 34.5 (876) 22.2 (10.1) E2SHH4P (1000) 40.5 (1028) 26.6 (12.1) E2SHH4P (1200) 46.5 (1181) 31.1 (14.1) E2SHSS (675) 18.0 (457) 13.6 (6.2) E2SHSS (915) 22.0 (558) 16.3 (7.4) E2SHSS (915) 28.0 (711) 20.4 (9.3) E2SHSS (1000) 28.0 (711) 24.5 (11.1) E2SHSS (1200) 28.0 (711) 28.6 (13.0) E2SHSS (675) 18.0 (457) 14.4 (6.5) E2SHSS (915) 22.0 (558) 17.3 (7.8) E2SHSS (915) 28.0 (711) 21.6 (9.8) E2SHSS (1000) 28.0 (711) 25.9 (11.7) E2SHSS (1200) 28.0 (711) 30.2 (13.7) E2SHHSS (675) 18.0 (457) 15.6 (7.1) E2SHHSS (915) 22.0 (558) 18.7 (8.5) E2SHHSS (915) 28.0 (711) 23.4 (10.6) E2SHHSS (1000) 28.0 (711) 28.1 (12.7) E2SHHSS (1200) 28.0 (711) 32.8 (14.9) E2SHHSS (675) 18.0 (457) 16.8 (7.6) E2SHHSS (915) 22.0 (558) 18.7 (9.2) E2SHHSS (915) 28.0 (711) 25.2 (11.4) E2SHHSS (1000) 28.0 (711) 30.2 (13.7) E2SHHSS (1200) 28.0 (711) 35.3 (16.0) 58

61 Component Assembly Specification & Part Numbers The Universal Quick Fit Fixed Shelves are designed to provide maximum versatility and can be installed or relocated within the Access cabinet quickly without the use of tools. Shelves are fully ventilated and designed to install on front and rear 19 or 23 EIA square hole mounting rails. Load Rating: 75 lbs. (34.0kg). Shelf Options Universal Quick Fit Fixed Shelf Part Number EIA Rail Spacing Mounting Front to Rear Shelf Shipping Width Min.-Max. Depth Weight in. in. (mm) in. (mm) lbs. (kg) QRSV ( ) 17.5 (450) 11.0 (5.0) QRSV ( ) 25.5 (650) 14.7 (6.6) QRSV ( ) 29.5 (750) 17.2 (7.8) QRSV ( ) 17.5 (450) 13.1 (5.9) QRSV ( ) 25.5 (650) 16.3 (7.4) QRSV ( ) 29.5 (750) 19.6 (8.9) Color Scheme Options A = Light Gray B = Black Snap-in shelf support bracket Slide shelf into position and twist cam to lock 59

62 Component Assembly Specification & Part Numbers Shelf Options Universal Quick Fit Sliding Shelf The Universal Quick Fit Sliding Shelf is easy to install and provides quick access to your equipment. This shelf is fully ventilated and designed to install on front and rear 19 or 23 EIA square hole mounting rails. Each shelf has a load capacity of 275 lbs. (125kg). Shelf - Extended Part Number EIA Rail Spacing Mounting Front to Rear Shelf Shipping Width Min.-Max. Depth Weight in. in. (mm) in. (mm) lbs. (kg) QRTSV 45 _ / /16 ( ) 17 1 /2 (450) 13.4 (6.2) QRTSV 65 _ / /8 ( ) 25 1 /2 (650) 16.1 (7.4) QRTSV 75 _ /8-32 ( ) 29 1 /2 (750) 20.2 (9.2) QRTSV23 45 _ / /16 ( ) 17 1 /2 (450) 14.2 (6.5) QRTSV23 65 _ / /8 ( ) 25 1 /2 (650) 17.1 (7.8) QRTSV23 75 _ /8-32 ( ) 29 1 /2 (750) 21.3 (9.8) Color Scheme Options A = Light Gray B = Black Snaps into mounting rail and secures with screw Front to rear adjustment 60

63 Component Assembly Specification & Part Numbers New from Cooper B-Line are a range of two 1U high 19-inch mounted fixed adjustable depth shelves. Designed to mount into any EIA 310-E / IEC 297 compliant cabinet, these shelves are adjustable in depth to suit mounting angle centers set at between 18 (450mm) & 30 (760mm). Available in either a standard duty or heavy duty construction, the shelves have been designed and tested to provide static load ratings of 220 lbs. (100kg) and 550 lbs. (250kg) respectively (based on a an evenly distributed load). Easy to use, each shelf comes with full assembly and installation instructions. Installation is as simple as; Install cage nuts in the appropriate positions in the front and rear 19-inch rails Adjust the shelf depth as appropriate and lightly fasten the inner shelf retaining screws Screw the shelf to the front and rear 19-inch rails Tighten up the inner shelf retaining screws as appropriate. Retaining screws locations are provided on the top surface of the shelf for easy access. If the top surface fixing points are inconvenient then alternative side fixing locations are provided Shelf Options Universal Fixed Adjustable Depth Shelf Part Number Description Mounting Depth Range Unit Weight Load Rating * Min Max lbs. (kg) lbs. (kg) SDFAS1U45B HDFAS1U45B HDFAS1U65B HDFAFWS1U45B HDFAFWS1U65B Standard Duty Fixed Adjustable (5.0) 220 (100) Depth Shelf 1U x 17.7 (450mm) Deep (450mm) (760mm) Heavy Duty Fixed Adjustable (7.0) 550 (250) Depth Shelf 1U x 17.7 (450mm) Deep (450mm) (760mm) Heavy Duty Fixed Adjustable (10.1) 550 (250) Depth Shelf 1U x 26.6 (650mm) Deep (650mm) (960mm) Full Width Heavy Duty Fixed Adjustable Depth Shelf 1U x 17.7 (450mm) Deep Suits 31.5 (800mm) Wide Cabinets Only Full Width Heavy Duty Fixed Adjustable Depth Shelf 1U x 26.6 (650mm) Deep Suits 31.5 (800mm) Wide Cabinets Only (450mm) (760mm) (650mm) (960mm) 20.5 (9.3) 550 (250) 29.6 (13.5) 550 (250) * - Assumes the load is evenly distributed 17.7 (450mm) for 45 Series 26.6 (650mm) for 65 Series 29.9 (760mm) for 45 Series 37.8 (960mm) for 65 Series 17 (434mm) 61

64 Component Assembly Specification & Part Numbers Shelf Options IMP Rails Vertical mid section IMP Rails are used in conjunction with the Mid-Shelf Bracket Kit to provide Fixed Shelves with six point loading capability. Finish: Painted Standard silver. Part Number Mounting Height Weight Spaces U in. (mm) lbs. (kg) IMP (1208) 28.6 (13.1) IMP (1430) 30.3 (13.9) IMP (1741) 22.0 (10.1) IMP (1875) 28.9 (13.2) IMP (2097) 31.1 (14.3) Mid-Shelf Bracket Kit (For Shelf Support) Access Mid-Shelf Brackets are used in conjunction with Fixed Shelves (see page 58) and IMP Rails (shown above) to provide six point loading with long shelves and deep rail spacing, or four point loading for short shelves installed in deep cabinets. Each Mid-Shelf Bracket Kit includes two (2) brackets and mounting hardware. Standard finish is clear zinc. Part Number Description Weight lbs. (kg) AMSB Mid-Shelf Bracket Kit 1.0 (0.45) 62

65 Component Assembly Specification & Part Numbers These Rack Mount Fan Shelves are typically located in the bottom or middle of the cabinet to help pull cool air from floor. Fan unit is rated at 110 volt, 60 hz, 0.37 FLA Cord Length: 6 ft. (1.8m) grounded Installs in 3U Shelf Options Rack Mount Fan Shelf (500cfm) dba=48 Part Number Width x Depth Weight in. (mm) lbs. (kg) E2FA AC 19.0 x 20.0 (482 x 508) 19.0 (8.7) E2FA AC 19.0 x 24.0 (482 x 609) 21.4 (9.8) E2FA AC 19.0 x 30.0 (482 x 762) 25.0 (11.5) E2FA AC 23.0 x 20.0 (584 x 508) 20.0 (9.1) E2FA AC 23.0 x 24.0 (584 x 609) 22.6 (10.3) E2FA AC 23.0 x 30.0 (584 x 762) 26.5 (12.1) Color Scheme Options A = Light Gray B = Black These Rack Mount Fan Shelves, with a three (3) fan unit, are typically located in the bottom or middle of the cabinet to help pull cool air from floor. Three fan unit is rated at 110 volt, 60 hz, 0.54 FLA Cord Length: 6 ft. (1.8m) grounded Installs in 2U Rack Mount Fan Shelf (315cfm) dba=53 Part Number Width x Depth Weight in. (mm) lbs. (kg) E2FA AC 19.0 x 20.0 (482 x 508) 16.5 (7.6) E2FA AC 19.0 x 24.0 (482 x 609) 18.9 (8.7) E2FA AC 19.0 x 30.0 (482 x 762) 22.5 (10.3) E2FA AC 23.0 x 20.0 (584 x 508) 17.5 (8.0) E2FA AC 23.0 x 24.0 (584 x 609) 20.1 (9.2) E2FA AC 23.0 x 30.0 (584 x 762) 24.0 (11.0) Color Scheme Options A = Light Gray B = Black 63

66 Component Assembly Specification & Part Numbers Shelving Compatibility Matrix for Access = Will fit, recommended = Will fit = Will fit, NOT recommended X = Will NOT fit Part Number Finish Description Mounting Config. Shelf Depth Cabinet Width Cabinet Depth Load Rating 23.6" 31.5" 26.6" 36.0" 39.4" 47.2" In. (mm) (600mm) (800mm) (675mm) (915mm) (1000mm)(1200mm) lbs (kg) Chassis Runners - 77lbs (35kg) Load Rating (Uniform Load) CR39 Silver Chassis Runners (pair) Side Rail Fixing 15.0 (380) (35.0) CR45 Silver Chassis Runners (pair) Side Rail Fixing 17.5 (444) (35.0) CR58 Silver Chassis Runners (pair) Side Rail Fixing 22.5 (571) (35.0) CR62 Silver Chassis Runners (pair) Side Rail Fixing 24.7 (627) (35.0) Part Number Description Mounting Config. Shelf Depth Cabinet Width Cabinet Depth Load Rating 23.6" 31.5" 26.6" 36.0" 39.4" 47.2" Gray Finish Black Finish In. (mm) (600mm) (800mm) (675mm) (915mm) (1000mm)(1200mm) lbs (kg) Vented Cantilever Shelves - 60lbs (27.3kg) Load Rating (Uniform Load) E2SHCLSP1915PA E2SHCLSP1915PB 2U Mounting Units 19-Inch Fixing 15.0 (380) (27.3) Sliding Keyboard Cantilever Shelves - 20lbs (9.1kg) Load Rating (Uniform Load) E2SHKBS19A E2SHKBS19B 2U Mounting Units 19-Inch Fixing (9.1) E2SHKBS23A E2SHKBS23B 2U Mounting Units 23-Inch Fixing (9.1) Sliding Keyboard & Mouse Cantilever Shelves - 20lbs (9.1kg) Load Rating (Uniform Load) E2SHKBSLPM19A E2SHKBSLPM19B 2U Mounting Units 19-Inch Fixing (9.1) E2SHKBSLPM23A E2SHKBSLPM23B 2U Mounting Units 23-Inch Fixing (9.1) Sliding / Swivel Keyboard & Monitor Shelves - 200lbs (90.9kg) Load Rating (Uniform Load) E2SHKBSR2U1921A E2SHKBSR2U1921B 2U Mounting Units 19-Inch Fixing 21.0 (533) (90.9) E2SHKBSR2U1924A E2SHKBSR2U1924B 2U Mounting Units 19-Inch Fixing 24.0 (610) (90.9) E2SHKBSR2U1930A E2SHKBSR2U1930B 2U Mounting Units 19-Inch Fixing 30.0 (762) (90.9) Sliding / Swivel Keyboard Shelves - 50lbs (22.7kg) Load Rating (Uniform Load) E2SHKBSR1U1921A E2SHKBSR1U1921B 1U Mounting Unit 19-Inch Fixing 21.0 (533) (22.7) E2SHKBSR1U1924A E2SHKBSR1U1924B 1U Mounting Unit 19-Inch Fixing 24.0 (610) (22.7) E2SHKBSR1U1930A E2SHKBSR1U1930B 1U Mounting Unit 19-Inch Fixing 30.0 (762) (22.7) Universal Quick Fit Fixed Shelves -77lbs (35.0kg) Load Rating (Uniform Load) QRSV45A QRSV45B 1U Mounting Unit Side Rail Fixing 17.7 (450) (35.0) QRSV65A QRSV65B 1U Mounting Unit Side Rail Fixing 25.6 (650) (35.0) QRSV75A QRSV75B 1U Mounting Unit Side Rail Fixing 29.5 (750) (35.0) Standard Duty Vented Fixed Shelves - 150lbs (68.2kg) Load Rating (Uniform Load) E2SH4P1920A E2SH4P1920B 1U Mounting Unit 19-Inch Fixing 20.0 (508) (68.2) E2SH4P1924A E2SH4P1924B 1U Mounting Unit 19-Inch Fixing 24.0 (610) (68.2) E2SH4P1930A E2SH4P1930B 1U Mounting Unit 19-Inch Fixing 30.0 (762) (68.2) E2SH4P1936A E2SH4P1936B 1U Mounting Unit 19-Inch Fixing 36.0 (914) (68.2) E2SH4P1942A E2SH4P1942B 1U Mounting Unit 19-Inch Fixing 42.0 (1067) (68.2) E2SH4P2320A E2SH4P2320B 1U Mounting Unit 23-Inch Fixing 20.0 (508) (68.2) E2SH4P2324A E2SH4P2324B 1U Mounting Unit 23-Inch Fixing 24.0 (610) (68.2) E2SH4P2330A E2SH4P2330B 1U Mounting Unit 23-Inch Fixing 30.0 (762) (68.2) E2SH4P2336A E2SH4P2336B 1U Mounting Unit 23-Inch Fixing 36.0 (914) (68.2) E2SH4P2342A E2SH4P2342B 1U Mounting Unit 23-Inch Fixing 42.0 (1067) (68.2) Heavy Duty Vented Fixed Shelves - 350lbs (159.1kg) Load Rating (Uniform Load) E2SHH4P1920A E2SHH4P1920B 1U Mounting Unit 19-Inch Fixing 20.0 (508) (159.1) E2SHH4P1924A E2SHH4P1924B 1U Mounting Unit 19-Inch Fixing 24.0 (610) (159.1) E2SHH4P1930A E2SHH4P1930B 1U Mounting Unit 19-Inch Fixing 30.0 (762) (159.1) E2SHH4P1936A E2SHH4P1936B 1U Mounting Unit 19-Inch Fixing 36.0 (914) (159.1) E2SHH4P1942A E2SHH4P1942B 1U Mounting Unit 19-Inch Fixing 42.0 (1067) (159.1) E2SHH4P2320A E2SHH4P2320B 1U Mounting Unit 23-Inch Fixing 20.0 (508) (159.1) E2SHH4P2324A E2SHH4P2324B 1U Mounting Unit 23-Inch Fixing 24.0 (610) (159.1) E2SHH4P2330A E2SHH4P2330B 1U Mounting Unit 23-Inch Fixing 30.0 (762) (159.1) E2SHH4P2336A E2SHH4P2336B 1U Mounting Unit 23-Inch Fixing 36.0 (914) (159.1) E2SHH4P2342A E2SHH4P2342B 1U Mounting Unit 23-Inch Fixing 42.0 (1067) (159.1) 64

67 Component Assembly Specification & Part Numbers Shelving Compatibility Matrix for Access = Will fit, recommended = Will fit = Will fit, NOT recommended X = Will NOT fit Part Number Description Mounting Config. Shelf Depth Cabinet Width Cabinet Depth Load Rating 23.6" 31.5" 26.6" 36.0" 39.4" 47.2" Gray Finish Black Finish In. (mm) (600mm) (800mm) (675mm) (915mm) (1000mm)(1200mm) lbs (kg) Heavy Duty Vented Fixed Adjustable Depth Shelves - 220lbs (100.0kg) Load Rating (Uniform Load) - SDFAS1U45B1U Mounting Unit " " 19-Inch Fixing 17.7 (450) (100.0) Extra Heavy Duty Vented Fixed Adjustable Depth Shelves - 550lbs (250.0kg) Load Rating (Uniform Load) - HDFAS1U45B 1U Mounting Unit " " 19-Inch Fixing 17.7 (450) (250.0) - HDFAS1U65B 1U Mounting Unit " " 19-Inch Fixing 25.6 (650) (250.0) - HDFWFAS1U45B 1U Mounting Unit " " Full Width Fixing 17.7 (450) (250.0) - HDFWFAS1U65B 1U Mounting Unit " " Full Width Fixing 25.6 (650) (250.0) Standard Duty Vented Sliding Shelves - 150lbs (68.2kg) Load Rating (Uniform Load) E2SHSS1920A E2SHSS1920B 1U Mounting Unit 19-Inch Fixing 20.0 (508) (68.2) E2SHSS1924A E2SHSS1924B 1U Mounting Unit 19-Inch Fixing 24.0 (610) (68.2) E2SHSS1930A E2SHSS1930B 1U Mounting Unit 19-Inch Fixing 30.0 (762) (68.2) E2SHSS1936A E2SHSS1936B 1U Mounting Unit 19-Inch Fixing 36.0 (914) (68.2) E2SHSS1942A E2SHSS1942B 1U Mounting Unit 19-Inch Fixing 42.0 (1067) (68.2) E2SHSS2320A E2SHSS2320B 1U Mounting Unit 23-Inch Fixing 20.0 (508) (68.2) E2SHSS2324A E2SHSS2324B 1U Mounting Unit 23-Inch Fixing 24.0 (610) (68.2) E2SHSS2330A E2SHSS2330B 1U Mounting Unit 23-Inch Fixing 30.0 (762) (68.2) E2SHSS2336A E2SHSS2336B 1U Mounting Unit 23-Inch Fixing 36.0 (914) (68.2) E2SHSS2342A E2SHSS2342B 1U Mounting Unit 23-Inch Fixing 42.0 (1067) (68.2) Heavy Duty Vented Sliding Shelves - 200lbs (90.6kg) Load Rating (Uniform Load) E2SHHSS1920A E2SHHSS1920B 1U Mounting Unit 19-Inch Fixing 20.0 (508) (90.9) E2SHHSS1924A E2SHHSS1924B 1U Mounting Unit 19-Inch Fixing 24.0 (610) (90.9) E2SHHSS1930A E2SHHSS1930B 1U Mounting Unit 19-Inch Fixing 30.0 (762) (90.9) E2SHHSS1936A E2SHHSS1936B 1U Mounting Unit 19-Inch Fixing 36.0 (914) (90.9) E2SHHSS1942A E2SHHSS1942B 1U Mounting Unit 19-Inch Fixing 42.0 (1067) (90.9) E2SHHSS2320A E2SHHSS2320B 1U Mounting Unit 23-Inch Fixing 20.0 (508) (90.9) E2SHHSS2324A E2SHHSS2324B 1U Mounting Unit 23-Inch Fixing 24.0 (610) (90.9) E2SHHSS2330A E2SHHSS2330B 1U Mounting Unit 23-Inch Fixing 30.0 (762) (90.9) E2SHHSS2336A E2SHHSS2336B 1U Mounting Unit 23-Inch Fixing 36.0 (914) (90.9) E2SHHSS2342A E2SHHSS2342B 1U Mounting Unit 23-Inch Fixing 42.0 (1067) (90.9) Extra Heavy Duty Sliding Shelves - 275lbs (125.0kg) Load Rating (Uniform Load) QRTSV45A QRTSV45B 1U Mounting Unit 19-Inch Fixing 17.7 (450) (125.0) QRTSV65A QRTSV65B 1U Mounting Unit 19-Inch Fixing 25.6 (650) (125.0) QRTSV75A QRTSV75B 1U Mounting Unit 19-Inch Fixing 29.5 (750) (125.0) QRTSVFW45A QRTSVFW45B 1U Mounting Unit Full Width Fixing 17.7 (450) (125.0) QRTSVFW65A QRTSVFW65B 1U Mounting Unit Full Width Fixing 25.6 (650) (125.0) QRTSVFW75A QRTSVFW75B 1U Mounting Unit Full Width Fixing 29.5 (750) (125.0) 2U Rack Mounted Fan Shelf (315cfm) - 110V 60 Hz A/C (dba = 53) E2FA ACA E2FA ACB 2U Mounting Unit (3 Fan) 19-Inch Fixing 20.0 (508) (125.0) E2FA ACA E2FA ACA 2U Mounting Unit (3 Fan) 19-Inch Fixing 24.0 (610) (125.0) E2FA ACA E2FA ACA 2U Mounting Unit (3 Fan) 19-Inch Fixing 30.0 (762) (125.0) E2FA ACA E2FA ACB 2U Mounting Unit (3 Fan) 23-Inch Fixing 20.0 (508) (125.0) E2FA ACA E2FA ACA 2U Mounting Unit (3 Fan) 23-Inch Fixing 24.0 (610) (125.0) E2FA ACA E2FA ACA 2U Mounting Unit (3 Fan) 23-Inch Fixing 30.0 (762) (125.0) 3U Rack Mounted Fan Shelf (500cfm) - 110V 60 Hz A/C (dba = 48) E2FA ACA E2FA ACB 3U Mounting Unit (Single Fan) 19-Inch Fixing 20.0 (508) (125.0) E2FA ACA E2FA ACA 3U Mounting Unit (Single Fan) 19-Inch Fixing 24.0 (610) (125.0) E2FA ACA E2FA ACA 3U Mounting Unit (Single Fan) 19-Inch Fixing 30.0 (762) (125.0) E2FA ACA E2FA ACB 3U Mounting Unit (Single Fan) 23-Inch Fixing 20.0 (508) (125.0) E2FA ACA E2FA ACA 3U Mounting Unit (Single Fan) 23-Inch Fixing 24.0 (610) (125.0) E2FA ACA E2FA ACA 3U Mounting Unit (Single Fan) 23-Inch Fixing 30.0 (762) (125.0) 65

68 Component Assembly Specification & Part Numbers Vertical Cable Management The Access cabinet range offers a choice of solutions when it comes to vertical cable management within the cabinet. With the corner-less design of the Access frame, it is possible to locate and install cable management in locations not normally available with conventional four-post cabinet designs. The following pages provide and overview to the solutions available. Access Vertical Cable Tray The Access cable tray provides full height cable management functionality including the ability to mount PDUs. The cable tray attaches directly to the adjustable side-mount facility on the top and bottom Access frame. This provides the capability to position the cable tray in almost any position within the cabinet front to rear. Available in two width options, cable tray is supplied complete with all applicable hardware and mounting instructions. Part Number Description ACTR22 Access 22U Cable Tray 3 (75mm) Wide ACTR27 Access 27U Cable Tray 3 (75mm) Wide ACTR39 Access 39U Cable Tray 3 (75mm) Wide ACTR42 Access 42U Cable Tray 3 (75mm) Wide ACTR47 Access 47U Cable Tray 3 (75mm) Wide ACTRW22 Access 22U Cable Tray 6 (150mm) Wide ACTRW27 Access 27U Cable Tray 6 (150mm) Wide ACTRW39 Access 39U Cable Tray 6 (150mm) Wide ACTRW42 Access 42U Cable Tray 6 (150mm) Wide ACTRW47 Access 47U Cable Tray 6 (150mm) Wide Finish: Painted standard silver Access Flextray Vertical Cable Basket The Access cable basket like the cable tray provides full height cable management functionality, but with the added functionality that basket brings. The cable basket can be attached to the adjustable side-mount facility on the top and bottom Access frame or bolted directly to the central vertical frame extrusions. Available in two width options, the cable baskets are supplied complete with all applicable hardware and mounting instructions. Cable baskets are finished as standard zinc plate and trivalent passivate to BS EN 12329:2000 Part Number ABS2215 ABS2715 ABS3915 ABS4215 ABS4715 ABS2230 ABS2730 ABS3930 ABS4230 ABS4730 Description Access 22U Cable Basket 6 (150mm) Wide Access 27U Cable Basket 6 (150mm) Wide Access 39U Cable Basket 6 (150mm) Wide Access 42U Cable Basket 6 (150mm) Wide Access 47U Cable Basket 6 (150mm) Wide Access 22U Cable Basket 12 (300mm) Wide Access 27U Cable Basket 12 (300mm) Wide Access 39U Cable Basket 12 (300mm) Wide Access 42U Cable Basket 12 (300mm) Wide Access 47U Cable Basket 12 (300mm) Wide 66

69 Component Assembly Specification & Part Numbers Vertical Cable Management Access Central Velcro Cable Tray & Basket Assemblies For some applications, it is preferable to manage the incoming cabling centrally across the width of the cabinet. The Access range offers the ability to configure the cabinet in this layout allowing cables to be brought up centrally before being split and presented to either the front or rear 19-inch mounting facility. In addition to the standard cable baskets detailed previously, a range of Velcro style cable trays are also available. Details described below. Part Number Description Finish ACCSK06B Access 24 (600mm) Wide Central Cable Support Kit Black ACCSK08B Access 32 (800mm) Wide Central Cable Support Kit Black ACVT2230B Access 27U Velcro Cable Tray 11.8 (300mm) Wide Black ACVT3930B Access 39U Velcro Cable Tray 11.8 (300mm) Wide Black ACVT4230B Access 42U Velcro Cable Tray 11.8 (300mm) Wide Black ACVT4730B Access 47U Velcro Cable Tray 11.8 (300mm) Wide Black ACVT2240B Access 27U Velcro Cable Tray 15.8 (400mm) Wide Black ACVT3940B Access 39U Velcro Cable Tray 15.8 (400mm) Wide Black ACVT4240B Access 42U Velcro Cable Tray 15.8 (400mm) Wide Black ACVT4740B Access 47U Velcro Cable Tray 15.8 (400mm) Wide Black ACVT2260B Access 27U Velcro Cable Tray 23.6 (600mm) Wide Black ACVT3960B Access 39U Velcro Cable Tray 23.6 (600mm) Wide Black ACVT4260B Access 42U Velcro Cable Tray 23.6 (600mm) Wide Black ACVT4760B Access 47U Velcro Cable Tray 23.6 (600mm) Wide Black ACVT2280B Access 27U Velcro Cable Tray 31.5 (800mm) Wide Black ACVT3980B Access 39U Velcro Cable Tray 31.5 (800mm) Wide Black ACVT4280B Access 42U Velcro Cable Tray 31.5 (800mm) Wide Black ACVT4780B Access 47U Velcro Cable Tray 31.5 (800mm) Wide Black Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 67

70 Component Assembly Specification & Part Numbers Enhanced Vertical Cable Management Designed to provide a fully flexible and configurable solution to meet the demands of today s high density in-cabinet cable management, the new cable management system has been designed specifically to complement the Access 31.5 (800mm) wide cabinet platform in either single or ganged configurations. Each vertical manager is fitted with two half height doors incorporating snap on hinges which allow quick opening of the doors from either side or complete removal. The vertical cable managers include provision for cable tie offs and supports in the form of cable tie lancers and multiple mounting points for Access Cabinet twist & lock cable management arms. Adjustable depth front to rear cable troughs complement the vertical managers. Designed to simply clip into the rear of the vertical managers, the troughs can be positioned to span front to rear at any or all of the four cable pass through positions provided on each vertical cable manager. Material: Steel with UL 94V-O black plastic components. Finish: Black RAL 9005 epoxy polyester powder coat paint. Vertical Manager - Single Cabinet Configurations & Part Numbers Manager Width Manager Approx. To Suit Cabinet Internal Section Configuration Part Number Ref. Unit Height in. (mm) (in 2 ) (mm 2 ) Single Ganged Offset AVCMA39U100B (A) 39U 3.91 (99) (18,779) - (C)* AVCMA42U100B (A) 42U 3.91 (99) (18,779) - (C)* AVCMA47U100B (A) 47U 3.91 (99) (18,779) - (C)* AVCMA39U170B (B) 39U 6.66 (169) (33,549) - (L or R)* AVCMA42U170B (B) 42U 6.66 (169) (33,549) - (L or R)* AVCMA47U170B (B) 47U 6.66 (169) (33,549) - (L or R)* (B) Mounting Rails Offset Right Mounting Rails Offset Left (B) Mounting Rails Fitted Centrally (A) Plan View On Cabinet (A) 68 *Key For Mounting Rail Offset L = Offset Left C = Center Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim

71 Component Assembly Specification & Part Numbers Enhanced Vertical Cable Management Vertical Manager - Ganged Cabinet Configurations & Part Numbers Manager Width Manager Approx. To Suit Cabinet Internal Section Configuration Part Number Ref. Unit Height in. (mm) (in 2 ) (mm 2 ) Single Ganged Offset AVCMA39U260B (C) 39U (261) (51,695) - (C,C) AVCMA42U260B (C) 42U (261) (51,695) - (C,C) AVCMA47U260B (C) 47U (261) (51,695) - (C.C) AVCMA39U330B (D) 39U (331) (66,465) - (L,C/C,R) AVCMA42U330B (D) 42U (331) (66,465) - (L,C/C,R) AVCMA47U330B (D) 47U (331) (66,465) - (L,C/C,R) AVCMA39U400B (E) 39U (401) (81.235) - (L,R) AVCMA42U400B (E) 42U (401) (81.235) - (L,R) AVCMA47U400B (E) 47U (401) (81.235) - (L,R) (E) (D) (A) (A) (A) (C) *Key For Mounting Rail Offset L = Offset Left C = Center Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 69

72 Component Assembly Specification & Part Numbers Enhanced Vertical Cable Management Two Width Options ACCT100*** = 3.90 (100mm) wide ACCT170*** = 6.65 (170mm) wide Adjustable depth for easy mounting Clip in lugs to engage into vertical cable channels front & rear 2U Deep cable trough assembly Note: (a) ACCT100*** variants will work with all vertical channel configurations assuming front & rear mounting rails are configured identically. (b) ACCT170*** variants can only be configured with vertical managers as per configuration D & E. In configuration D the ACCT170*** unit can only be fitted in the cabinet where the 19-inch rails have been offset. Again front and rear rail positions need to be configured identically. Mounting Angle Configuration / Horizontal Cable Troughs Options Minimum Mounting Rail Insert Cable Trough Configuration Cabinet Depth Position Front & Rear Min Depth Max Depth in. (mm) in. (mm) in. (mm) in. (mm) 26.6 (675) 7.5 (190) N/A N/A N/A N/A 34.5 (875) 7.5 (190) (260) 14.0 (357) 36.0 (915) 7.5 (190) (260) 15.6 (397) 39.4 (1000) 7.5 (190) (260) 19.0 (482) 47.3 (1200) 7.5 (190) (260) 26.8 (682) 70

73 Component Assembly Specification & Part Numbers Vertical Cable Management Metal Cable Hoops E2MACMR3BLP Cable Guides Cable guides are designed to install directly on mounting rails for vertical cable management Guide size is 4 (101mm) x 2 (51mm) Finish: Flat black powder coat ACH6 Cable Hoop Features Designed to maximize cable management facilities within 23.6 (600mm) or 31.5 (800mm) wide cabinets Offers 2.0 in 2 (1550mm 2 ) of internal cable management space Fits directly onto Cooper B-Line s Access 19-inch mounting angle ancillary mounting positions Can be fitted every 1U if required Does NOT compromise your 19-inch mounting facility ACH8 Cable Hoop Features Fits directly onto Cooper B-Line s Access 19-inch mounting angle ancillary mounting positions. (suitable for 31.5 (800mm) wide racks only) Offers 10.0 in 2 (6500mm 2 ) of internal cable management space Can be fitted every 1U if required Does NOT compromise your 19-inch mounting facility Offers simplified vertical cable management while still offering an open architecture Hoop - 3 /16 (5mm) diameter mild steel bar finished painted silver CTM17 Flat Bar Cable Hoop Features Fits directly onto Cooper B-Line s Access 19-inch mounting angle using side twist & lock mounting positions. (suitable for 31.5 (800mm) wide racks only) Does NOT compromise your 19-inch mounting facility (needs to be fitted before mounting 19-inch equipment). Plate - 11 Ga. (3mm) thick flat mild steel - edges are rounded off Finish - Painted silver 71

74 Horizontal Cable Management Options Horizontal Cable Organizers SB719 1 Patch Cord Organizers Organize and provide strain relief for your horizontal and vertical cable runs. Patch Cord Organizer panel and cable rings are powder coated steel with Polyethylene wire saddles. All mounting hardware is included. Part Number EIA Mounting Number of Mounting Spaces Width Wire Saddles U SB719 2L SB719191_ SB719192L_ SB719231_ SB719232L_ SB C Cable Trough Organizers Organizes cable when a constant cable bearing surface and controlled bend radius are required. Organizers are powder coated steel. All mounting hardware is included. SB C Part Number EIA Mtg. Inside Inside Mtg Spaces Width Depth Height U in. (mm) in. (mm) SB C_ 19 3 (76) 3 (76) 2 SB C_ 19 4 (101) 6 1 /2 (165) 4 SB O_ 19 4 (101) 6 1 /2 (165) 4 SB O Horizontal Cable Organizers Organizes horizontal cable runs. Cable Organizers are powder coated steel. All mounting hardware is included. SB719 2XL Part Number EIA Mtg. Inside Inside Mtg Spaces Width Depth Height U in. (mm) in. (mm) SB719192XL_ /2 (89) 3 (76) 2 SB719194XL_ /2 (89) 6 1 /2 (165) 4 SB719232XL_ /2 (89) 3 (76) 2 SB719234XL_ /2 (89) 6 1 /2 (165) 4 Color Scheme Options A = Light Gray B = Black 72

75 Horizontal Cable Management Options RCM+ Horizontal Cable Managers Part Number Description Finish SB87019S1FB* 19-inch Cable Manager - 1U High Aluminum with UL 94V-0 Black Plastic Components SB87023S1FB* 23-inch Cable Manager - 1U High Aluminum with UL 94V-0 Black Plastic Components SB87019S2FB* 19-inch Cable Manager - 2U High Aluminum with UL 94V-0 Black Plastic Components SB87023S2FB* 23-inch Cable Manager - 2U High Aluminum with UL 94V-0 Black Plastic Components SB87019S3FB* 19-inch Cable Manager - 3U High Aluminum with UL 94V-0 Black Plastic Components SB87023S3FB* 23-inch Cable Manager - 3U High Aluminum with UL 94V-0 Black Plastic Components *All products with part numbers finishing FB = Flat Black Finish. Cable Troughs Front to Rear Cable Troughs Designed to further enhance Cooper B-Line s Access Cabinet System comes a range of front to rear cable trough accessories. Offering versatile adjustment, these 2U high x 4 3 /8 (110mm) wide trays provide unhindered front to rear cable management, and include the provision for cable ties and wraps to be secured. The cable troughs are suitable for mounting into 800mm wide Access cabinets, where they simply bolt onto the side mount facility of the standard 19-inch rails. The design allows the trough to sit flush with the face of the 19-inch mounting angles, allowing front horizontal cable managers to be integrated, to provide a complete 360 cable management solution at any given U level. The troughs are available in a range of adjustable depth options to meet the needs of all Access cabinet depth configurations. Each of the depth options has adjustment built in, allowing for the depth between the front and rear 19-inch mounting angles to be adjusted, even when the trough has been cabled. AFR2UCT-1B AFR2UCT-3B AFR2UCT-2B Technical Specifications Material Mild steel 18 Gauge (1.2mm) thick Finish Painted RAL9005 Black Internal Dimensions 4 3 /8 (110mm) Wide x 3 3 /8 (85mm) High AFR2UCT-4B Part Number Description 19-Inch Angle Centers* Shipping Wt. in. (mm) lbs. (kg) AFR2UCT-1B Access Front to Rear 2U Cable Trough - Option /16 to /16 (408 to 427) 2.00 (0.90) AFR2UCT-2B Access Front to Rear 2U Cable Trough - Option /16 to /16 (408 to 608) 2.86 (1.30) AFR2UCT-3B Access Front to Rear 2U Cable Trough - Option /16 to /16 (608 to 808) 3.86 (1.75) AFR2UCT-4B Access Front to Rear 2U Cable Trough - Option /16 to /16 (808 to 1008) 4.85 (2.20) * 19 Inch Mounting Angle Centers refers to the dimension between the 19-inch mounting face of the front and rear Access Cabinet 19-inch mounting angles. 73

76 Horizontal Cable Management Options Plastic Cable Tidies Part Number CTS CTL Description Small Mid Gray Tidy Large Mid Gray Tidy With ever-increasing high density cabling applications, effective cable management is required to minimize installation times and create maximum flexibility for installers and end users alike. To enhance the unique Access open frame, Cooper B-Line offer two sizes of plastic cable tidies. Both Large (CTL) and Small (CTS) versions share the same characteristics. Features:- Fits Directly To 19-inch Panel Mounts Hinged gate clip action Single hole fixing Multiple mounting positions Technical Overview:- Mid-Gray Plastic CTS 2 11 /16 (68mm) x 1 3 /16 (30mm) internal opening 3 1 /8 (80mm) x 1 9 /16 (40mm) x 1 (26mm) external dim CTL 4 1 /8 (105mm) x 1 3 /4 (45mm) internal opening 4 3 /4 (120mm) x 2 3 /8 (60mm) x 1 1 /8 (28mm) external dim Twist & Lock Cable Management The new Twist and Lock cable management system is designed to fit on all Access Rack 19-inch uprights, and is also available as a 2 U high 19-inch panel mount version. It provides a versatile system for vertical and horizontal cable management with the large diameter ensuring the correct bend radius on cables. The arms can be fitted at any increments of 2 U into location holes on the 19-inch panel mounts. Twist & lock cable management support arms, end retainers and divider rings. Part Number Description TLCMS Arms and Ends (pack of 10) TLCMR Divider Rings (pack of 10) Enhanced Twist & Lock Ends This addition to the twist and lock range offers greater versatility than the standard end fitting. Part Number Description TLCMEF Enhanced Twist & Lock ends (pack of 10) Twist & lock arms fitted to Access 19 uprights. Twist & Lock Cable Management Panel This 2 U high panel incorporates up to 5 twist and lock arms to provide horizontal cabling across the rack. The large diameter arms ensure the correct bend radius on cables. Part Number TLCMFP Description 2U Twist & Lock Cable Management Panels Inter-Rack Cable Support Bracket This bracket has been designed specifically for supporting vertical cable trunking when fitted between bayed 800mm wide Access cabinets and also provides horizontal cable support between racks when used in conjunction with twist and lock arms. Enhanced twist and lock ends Part Number FCT88 74 Description Inter-rack Support Bracket

77 Access Cabinet Components Velcro Cable Ties These products are used to secure and organize cables to equipment racks. Reusable design allows cables to be easily added or removed. 1 2 Part Number SB72558x5 SB7251x10 SB72658x4 SB7261x8 Description & Length Cable Wrap 5 /8 x 5 (16mm x 127mm) Cable Wrap 1 x 10 (25mm x 254mm) Cable Catch 5 /8 x 4 (16mm x 101mm) Cable Catch 1 x 8 (25mm x 203mm) 3 SB72758x6 Cable Strap 5 /8 x 6 (16mm x 152mm) 4 SB72834x6 Cable Hanger 3 /4 x 6 (19mm x 152mm) Note: Sold in standard packages of ten (10) Blanking Panels Blanking Panel Application Managing Airflow. Unused vertical space in open frame racks and rack enclosures creates an unrestricted recycling of hot air that causes equipment to heat up unnecessarily. The use of blanking panels can reduce this problem. Active equipment mounted in racks cools itself by drawing cooled air from the data centre or the raised floor environment. If any heated exhaust air is allowed to return to the air inlet of the equipment, an undesirable overheating condition may occur. Within the rack itself the possibility exists for hot exhaust air to be recycled into the active equipment air intake. This is mainly caused when hot exhaust air returns above or below the equipment in unused rack space. This recycling of air is not widely appreciated by data Centers and is a cause of equipment overheating. The use of blanking panels, to stop hot air recirculation, is a low cost solution that requires no power. Overheating due to air recirculation and the benefits of using blanking panels are well recognized by IT equipment manufacturers, and Cooper B-Line can provide a wide range of blanking panels to suit all 19-inch rack applications. 75

78 Access Cabinet Components Front to Rear Blanking Panels Quick Fit Adjustable Depth Switch / Server Side Blanking Panels Designed for use in applications where both servers and switches need to be housed in a single enclosure, these quick fit, adjustable depth panels form part of our modular approach to the optimization of air-cooling within our Access cabinet solution. Incorporating the same tool-less turn hardware as we use on our quick fit front 19-inch blanking panels, these panels can easily and quickly be fitted to our Access cabinet range, where the mounting angles have a side mount facility. Available in three height (1U, 2U and 5U) and depth configurations, the deployment of these quick fit, adjustable depth blanking panels in conjunction with our vertical baffles and quick fit 19-inch blanking panels will allow users to conveniently optimize the air flow within the cabinet structure ensuring: That the cold air feed is directed to the area where it is needed, allowing the servers and switches to operate efficiently. That the hot air expelled by any servers or switches cannot recirculate or contaminate the cold air feed. That the cabinet s cooling efficiency is significantly improved and as a consequence, provides improved power efficiency within the data room. This type of scenario is often associated with the deployment of network switches, including the Cisco 6500 series, where the switch section breathes left to right across the unit. Technical Specifications Material Finish Fixing Type Panel - Mild steel 18 Gauge (1.2mm) thick (18swg) Fixings Black Polycarbonate Painted RAL9005 Black Tool-less Turn Fasteners Part Number Description Dim A Dim B Shipping Wt. in./(mm) in./(mm) lbs./(kg) SESBP1U3QFB 1U Quick Fit Server 16 5 /8 to 20 5 / /8 to 14 3 / Side Blanking Panel (422 to 525) (264 to 366) (0.25) SESBP1U4QFB 1U Quick Fit Server 21 1 /16 to 25 1 / /16 to / Side Blanking Panel (535 to 638) (376 to 478) (0.27) SESBP1U5QFB 1U Quick Fit Server 25 1 /2 to 29 1 / /16 to 23 1 / Side Blanking Panel (648 to 750) (488 to 590) (0.29) SESBP2U3QFB 2U Quick Fit Server 16 5 /8 to 20 5 / /8 to 14 3 / Side Blanking Panel (422 to 525) (264 to 366) (0.48) SESBP2U4QFB 2U Quick Fit Server 21 1 /16 to 25 1 / /16 to / Side Blanking Panel (535 to 638) (376 to 478) (0.52) SESBP2U5QFB 2U Quick Fit Server 25 1 /2 to 29 1 / /16 to 23 1 / Side Blanking Panel (648 to 750) (488 to 590) (0.56) SESBP5U3QFB 5U Quick Fit Server 16 5 /8 to 20 5 / /8 to 14 3 / Side Blanking Panel (422 to 525) (264 to 366) (3.30) SESBP5U4QFB 5U Quick Fit Server 21 1 /16 to 25 1 / /16 to / Side Blanking Panel (535 to 638) (376 to 478) (3.40) SESBP5U5QFB 5U Quick Fit Server 25 1 /2 to 29 1 / /16 to 23 1 / Side Blanking Panel (648 to 750) (488 to 590) (3.50) 76

79 Access Cabinet Components Blanking Panels Universal 19 PlenaFill Plastic Blanking Panels Designed to fit square pierced mounting rails, these plastic tear off blanking panels provide an ideal solution to quickly and easily improve your cabinet's cooling efficiency. Each panel is a 27U sheet with serrated tear-offs every 1U Available in single sheet or 10 sheet packs Manufactured from fire retardant UL-VO compliant material, finished dark gray Punch Snap Rivet Remover Part Number CBLPF27U-1 CBLPF27U-10BR CBLPFHP CBLPFSRRT CBLPFBR Description (1) 27U Blanking Panel & 1 Pack of 50 Square Hole Snap Rivets (10) 27U Blanking Panels & 10 Packs of 50 Square Hole Snap Rivets Hole Punch Tool Snap Rivet Remover Tool Snap Rivets (50 Pack) 19-Inch Quick-Fit Tool-Less Blanking Panels New to Cooper B-Line s standard product offering comes a range of quick fit 19-inch blanking panels. Incorporating tool-less turn hardware these panels can be easily and quickly fitted to all EIA-310-E compliant 19-inch enclosures having 19-inch square pierced mounting rails. Ideal for blanking off unused portions of the front 19-inch mounting area, these panels are available in 1U, 2U and 5U increments to suit all applications. Standard finish: RAL 9005 Black Part Number Description Shipping Wt. in. (mm) 1U 19-Inch Quick Fit Blanking Panel. PPS1UQFB 482.6mm Wide x 44.0mm High 0.55 (0.25) PPS2UQFB PPS5UQFB 2U 19-Inch Quick Fit Blanking Panel mm Wide x 89.0mm High 5U 19-Inch Quick Fit Blanking Panel mm Wide x 222.0mm High 1.00 (0.45) 2.42 (1.10) 77

80 Access Cabinet Components Vertical Baffles 23.6 (600mm) Wide Cabinet Vertical Baffles Brush Strip Blanking Panels Available to suit 23.6 (600mm) wide Access cabinets, these quick fit, vertical, brush strip baffles have been designed to enhance the cooling efficiency of the Access cabinet, by simply sealing off the area between the 19-inch mounting angle and the side panel. One of the fundamentals for providing efficient cabinet cooling is the ability to stop hot air/cold air cross over. Not addressing this issue can result in the hot air expelled by the active equipment recirculating inside the cabinet structure. This scenario can ultimately lead to extreme hot spots, which in turn can cause premature equipment failure. Taking a matter of minutes to fit, these vertical brush strip baffles can easily be retro fitted to all 23.6 (600mm) wide Access cabinets. Simply bolt the mounting brackets to the top and bottom frame and then clip the vertical baffle in position, using the quick fit tool-less fasteners. Once in place, the vertical baffles form an effective barrier to stop hot air recirculating to the front of the cabinet. When used in conjunction with blanking panels, significant improvements can be made to the cabinet s cooling efficiency. Importantly the baffles do not affect the ability to cable down the sides of a 23.6 (600mm) wide cabinet. Each of the vertical baffles incorporates a brush section, which allows the baffles to be either fitted over existing cables or for additional cables to be passed through. In each case the bristles on the brush effectively seal around the cables, stopping leaks. The 23.6 (600mm) wide baffles can be configured to suit a wide range of installations, including those incorporating mixed technologies such as servers and switches. Although the baffles can be staggered to create two L shaped voids, Cooper B-Line recommends the use of 31.5 (800mm) wide cabinets for housing 19-inch mounted active equipment requiring side to side ventilation, in order to maintain equipment cooling efficiency. Part Number Description Shipping Wt. lbs. (kg) Access Cabinet Vertical Brush Strip Baffles ACVBPA426A To fit 42U x 23.6 (600mm) wide cabinet 7.05 (3.20) Finished Light Gray NCS 1502-Y Access Cabinet Vertical Brush Strip Baffles ACVBPA426B To fit 42U x 23.6 (600mm) wide cabinet 7.05 (3.20) Finished Black RAL9005 Access Cabinet Vertical Brush Strip Baffles ACVBPA476A To fit 47U x 23.6 (600mm) wide cabinet 8.38 (3.80) Finished Light Gray NCS 1502-Y Access Cabinet Vertical Brush Strip Baffles ACVBPA476B To fit 47U x 23.6 (600mm) wide cabinet 8.38 (3.80) Finished Black RAL9005 Each set is comprised of: two (2) vertical brush strip baffles, two (2) pairs of handed mounting brackets, one (1) fixing kit. 78

81 Access Cabinet Components Vertical Baffles 31.5 (800mm) Wide Cabinet Vertical Baffles Brush Strip Blanking Panels Available to suit 31.5 (800mm) wide Access cabinets, these quick fit, rotating, vertical brush strip baffles stop hot air recirculating around to the front of the cabinet, by filling in the aperture between the mounting angle and the side panel. One of the basic requirements for providing efficient cabinet cooling is the ability to stop hot air/cold air cross over. Not addressing this issue can result in the hot air expelled by the active equipment recirculating inside the cabinet structure. This scenario can ultimately lead to extreme hot spots, which in turn can cause premature equipment failure. Forming an effective barrier, these vertical brush strip baffles can easily be configured to suit a wide range of installations, including those incorporating mixed technologies such as servers and switches. For normal server applications these baffles would be fitted either side of the front 19-inch mounting angles. Where mixed technologies, such as servers and switches need to be housed, the baffles can be staggered creating two L shaped voids. Typically, a baffle would be fitted on the front left hand side, providing a cold air void along the front and right hand side of the cabinet. The hot air void would then comprise the opposing L shaped void down the left hand side and rear of the cabinet. Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim Part Number Description Shipping Wt. lbs. (kg) Access Cabinet Vertical Brush Strip Baffles ACVBPA428A To fit 42U x 31.5 (800mm) wide cabinet (8.50) Finished Light Gray NCS 1502-Y Access Cabinet Vertical Brush Strip Baffles ACVBPA428B To fit 42U x 31.5 (800mm) wide cabinet (8.50) Finished Black RAL9005 Access Cabinet Vertical Brush Strip Baffles ACVBPA478A To fit 47U x 31.5 (800mm) wide cabinet (9.50) Finished Light Gray NCS 1502-Y Access Cabinet Vertical Brush Strip Baffles ACVBPA478B To fit 47U x 31.5 (800mm) wide cabinet (9.50) Finished Black RAL9005 Each set is comprised of: two (2) vertical brush strip baffles, two (2) pairs of handed mounting brackets, one (1) fixing kit. 79

82 Access Cabinet Components Fan Units 2U Scavenger Fan Units Developed to mount into the bottom 2U of the cabinet the scavenger fan tray has been designed to pull cold air from either the floor void or from the local ambient environment. With the top perforated area of the fan tray protruding through the front 19-inch mounting angles the unit feeds air into a chimney created by a solid door, side panels, vertical baffles and equipment mounted in the cabinet. Any unused 19-inch apertures need to be blanked off to maximize cooling efficiency. Ideal for scenarios where the air flow to the cabinet is restricted due to either: The remote location of the cabinet in relation to the CRAC unit (Computer Room Air Conditioning) The velocity of the air from the CRAC unit being too high, which causes the air to bypass the cabinet location and provides ineffective cold air feed. In such cases the scavenger unit is capable of greatly improving the air feed characteristics of the cabinet. Technical Specifications Height Width Depth Protrusion Through 19-inch Mounting Facility Mounting Range Unit Weight Material Finish Power Indicator Lead Type Warranty Compliance 2U /2 (88.1mm) 19 (482.6mm) wide (over mounting lugs) 17 (432.6mm) wide (over plenum chamber) 18 1 /4 (463.0mm) 3 15 /16 (100.0mm) EIA 310E 19-inch compliant 16 1 /2 (420.0mm) min 26 9 /16 (675.0mm) max 17.8 lbs. (8.1kg) 16 Gauge (1.5mm) mild steel Painted Black RAL9005 LED lit green when power is present Supplied with IEC 320 (10amp) to UK 3-Pin (BS1363) lead 12 Months WEEE Directive. RoHS Compliant CE Approved Part Number Description Electrical Supply Air Flow Characteristics ft 3 /Hour (m 3 /Hour) RMHPFU230 2U Scavenger Fan Tray Assembly 220v A/C 50Hz (675) RMHPFU120 2U Scavenger Fan Tray Assembly 110v A/C 60Hz (695) 80

83 Access Cabinet Components Rack Mounted Fan Units In Rack Ventilation Units Based on universal 19-inch mounting Centers (IEC 297 standard), Cooper B-Line offers two sizes of In-Rack Ventilation Units. Both 3 and 6 fan versions share the same characteristics. Fits directly to panel mounts. Neon power indicator. Occupies only 1U of rack space. Front panel metalwork 3.0mm powder coated mild steel. Other metalwork 1.2mm powder coated mild steel. Fan specification - see page 63 for the roof mounted fan tray. Part Number Description No. of Fans Color IVU3L Ventilation Unit - 230v A/C 3 Light Gray IVU3LB Ventilation Unit - 230v A/C 3 Black IVU6L Ventilation Unit - 230v A/C 6 Light Gray IVU6LB Ventilation Unit - 230v A/C 6 Black IVU3L1 Ventilation Unit - 110v A/C 3 Light Gray IVU3L1B Ventilation Unit - 110v A/C 3 Black IVU6L1 Ventilation Unit - 110v A/C 6 Light Gray IVU6L1B Ventilation Unit - 110v A/C 6 Black 3 Fan Unit 6 Fan Unit Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 81

84 Access Cabinet Components Earth Kits & Earth Bars Cabinet Earthing Kits An extensive range of earth kits and earth bars are available to cover our range of standard products. In addition, we also offer a range of standard, non-cabinet specific, products that can be easily modified to fit most applications. Earth kits are available for each of our standard products lines. Each kit comprises sufficient earth leads, nuts and screws to provide earth continuity through the product in compliance to EN60950 Clause Part Number UAECEK Description Access Cabinet Earth Kit Static Earth Point Comprising of a bracket and applicable fixings, the Static Earth Point can be attached to any suitable point on any of the standard Access 19-inch vertical rails (not 3 into 2 rail configurations). Finished in a zinc plate and clear passivate finish, the Static Earth Point provides earthing continuity to the Access frame which in turn can be bonded down to any suitable clean earth point. Part Number AEB Description Cabinet Electro Static Earthing Point 82

85 Access Cabinet Components Earth Kits & Earth Bars Horizontal Rack Ground Bar Kit Comprising of a ground bar and applicable hardware as shown below, the Horizontal Rack Ground Bar can be attached to any of the standard Access 19-inch vertical rails. Isolators may be used to separate bar from rack or omitted depending on application. Material is 3 /16 (4.7mm) x 1 (25.4mm) copper bar. Part Number SBHB119K Description Pre-Tapped (492mm) Length Universal Grounding Bar Comprising of a ground bar, splice plate and applicable hardware as shown below, the Universal Grounding Bar is used as a rack mounted equipment grounding bus. Material is 3 /16 (4.7mm) x 3 /4 (19.0mm) copper bar. SB57903 shown Part Number SB57903 SB57904 Description 19 Rack Width (490mm) Length - 16 Holes 23 Rack Width (592mm) Length - 18 Holes 83

86 Access Cabinet Components Earth Kits & Earth Bars Vertical Rack Ground Bar & Kits Comprising of a ground bar or ground bar and hardware kit, the Vertical Rack Ground Bar can be attached to any of the standard Access 19-inch vertical rails. Isolators may be used to separate bar from rack or omitted depending on application. Material is 1 /4 (6.3mm) x 5 /8 (15.9mm) copper bar. Hardware Kit SBVB36 shown Part Number SBVB36 SBVB36K SBVB72 SBVB72K Description Ground Bar Only - Pre-Tapped Holes - 36 (914mm) Length Bar & Hardware Kit - Pre-Tapped Holes - 36 (914mm) Length Ground Bar Only - Pre-Tapped Holes - 72 (1828mm) Length Bar & Hardware Kit - Pre-Tapped Holes - 72 (1828mm) Length 84

87 Access Cabinet Components U Height Labels & Bolt Through Kits Unit Height Labels One of the most difficult tasks when fitting equipment in 19-inch cabinets is locating the unit height position for mounting. Cooper B-Line have solved this problem by supplying a self-adhesive U height numbering strip which simply fixes to the front face of the 19-inch panel mounts. Technical Overview Pressure sensitive self adhesive Universal size to suit all Access cabinets Just trim to the desired unit height as required Black lettering on white background Part Number AUHL AUHLR AUHLFR AUHLFRR Description Pairs of Height Labels, Top to Bottom Pairs of Height Labels, Bottom to Top Pairs of Height Labels, 1-47 & Top to Bottom Pairs of Height Labels, 1-47 & Bottom to Top Bolt Through Kit Access bolt through kits are the preferred method of baying suites of Access cabinets. The kit consists of a set of two M8 x 2 3 /4 (70mm) screws, nuts and washers, finished in zinc plated. Suitable for Access cabinets with pre-drilled extrusion, bolt through kits are available ex-stock. Part Number BTK Description Bolt Through Kit Light Gray & Blue Cabinets Shown For Clarity Only Standard Default Finish Is Black With Black Trim 85

88 Access Control & Environmental Monitoring i-pal & i-box Systems Introduction Today s businesses are becoming more and more reliant on their IT infrastructure to sustain a competitive edge. Businesses are therefore looking to maximize their capital investments in IT systems by striving to achieve 100% network availability. Human Error remains the largest threat to network integrity. Something as simple as incorrect or unauthorized modification to cable patching can cause systems to fail resulting in lost time and lost revenues. The first line of defense is therefore the proactive control of who has access to the infrastructure and when! While building control systems have been developed to manage room access, historically cabinet level security has been managed with conventional barrel key locks. On larger sites this has required the adoption of complex and time-consuming systems to manage the authorization of personnel and the issuing of keys. Even with these elaborate processes in place, the risk from the loss of keys, not to mention the potential expense and trouble of changing locks, can make access control an expensive hidden cost. In response to demand from our customers Cooper B-Line has developed i-pal, an intelligent electronic proximity and control solution. Based on proven building control architecture i-pal can deliver either simple configurable local access and control or, when integrated with i-box, a fully Scalable local and remote access control and monitoring solution with access tracking and alarm function. In addition the adoption of i-box has the added benefit of, fully configurable environmental monitoring solution with a range of SMART sensors complete with individually configurable threshold alarms. Control and Monitoring Integrated Proximity Access Locking Handle Key Features Proactive Control Local Management Easy Configuration Scalable Retrofit-able Upgradeable i-pal offers a simple modular solution to cabinet access control utilizing leading edge proximity card technology. Fully compatible with the Access Cabinet range i-pal can be supplied as either a factory or retrofit option. As a stand alone solution i-pal can be configured in a matter of minutes to provide configurable access control; Step 1 Simply plug the i-pal handle (IPALBL, IPALBK, IPALGY) into its multi regional universal power supply (IBIPPSU). Step 2 Then using the system administrator program card you can program in up to 500 user cards per handle.(ipalcard contains one system administrator program card together with three user and user delete cards - additional user cards are available IPALACARD). Step 3 Add or delete user cards using the system administrator program card as required. i-pal can also be designed into other applications and is compatible with a number of other cabinet products. i-pal is designed for indoor applications although other handles offering the same functionality are available for outdoor applications, please contact us for details. + + = Access Control IBIPPSU IPALBK IBOXCARD 86

89 Access Control & Environmental Monitoring i-pal & i-box Systems Technical Data Dimensions Handle assembly: 30mm Wide x 20mm Deep x 154mm High Dimensions I-PAL module: 34mm Wide x 36mm Deep x 85mm High Voltage: 12VDC Power: 0.72W Current: 12VDC Communications Port: RS232 Standalone operation: 500 Card Capacity (When Connected to i-box, see i-box details) Part Number IPALBL IPALBK IPALGY IPALEXTL IBIPPSU IPALCARD IPALACARD Description Single i-pal Handle Blue Single i-pal Handle Black Single i-pal Handle Gray i-pal Handle 5 metre Extension Lead i-box/i-pal Universal Power Supply i-pal Card set comprising of 1x program card, 3x user cards and 3x user delete cards i-pal Additional card set comprising of 5x user cards and 5x user delete cards *Note lock rods/lock cam may require modification to operate correctly IPALBL IPALBK IPALGY Solution Integration with i-box By simply integrating i-pal with i-box the i-pal becomes a fully Scalable local and remote access control system with full system administrator override facility providing ultimate access control. Additional enhanced functions include; Integrated centralized user card management database allowing individual user cards to be added, deleted or modified in a matter of seconds. Any changes to the database trigger automatic updates to all the associated access points (handles) providing real time seamless security An increased user capacity from 500 users per access points (stand alone i-pal) to 4,000 users per access point Real time transaction logging including event date/time stamp for each access point transaction or attempted transaction The ability to generate detailed reports with the option to filter the data in a wide variety of ways including by an individual access point, group of access points, employee name, company / department, individual date or date range. The system also allows this data to be exported should the information need to be presented in an alternative format or need further analysis The ability to define and associate up to 256 configurable user times zones. These time zones can then be associated to individual cards providing authorized access periods (i.e. 08:00 to 18:00 Monday to Friday access is granted) IP camera integration allowing individual access points to be associated with local cameras providing the opportunity to link video or photographic data to all logged transaction events The option to link unauthorized/exceptional access transactions to SMS or alerts providing real time security alarms Importantly the loss of the network does not mean loss of security as the handle holds the card access data and simply uploads authorized transaction data to the i-box database when the network and i-box come back on line. Each i-box is configured to support the integration of up to two i-pal handles. Key Features Simple Key Replacement Support for 4,000 Users Transaction Logging Time Zone Configuration Plug and Play GUI Management Interface IP Camera Link Online for: Real Time Alarm Reporting, SMS; , SNMP Traps 87

90 Access Control & Environmental Monitoring i-pal & i-box Systems Solution As well as offering the integration of an enterprise level Access Control and Security system i-box has the added benefit of providing a comprehensive Environmental monitoring solution, allowing for the convergence of Facilities / IT monitoring within a single network addressable unit. Built into i-box as standard are four environmental sensors, these being; Temperature Humidity Light Consumed voltage The further fourteen SMART ports on the front of the i-box allow a whole range of optional plug and play sensors to be connected, details of these sensors are shown on the preceding pages. In each case the individual sensor provides; Individual sensors can be linked up to 15m away from the i-box using the sensor extension cables (IBOXSEC) The ability to set individual sensor level threshold limits with pre alarm and full alarm functionality triggering alarm out puts via inbuilt SNMP (Small Network Management Protocol) agents including V2c In most cases sensors have the function to provide Low, Pre, and High threshold alarms with the added function of being able to set Quick Change alarms identifying potential problems when they first occur Threshold alarms can be set to be temporarily disabled in instances when the cabinet door or side panels are opened altering the microenvironment within the cabinet The facility to link alarm functions with external calls to action including SMS and alerts, essential for lights out or unmanned facilities Configurable sensor level identification enabling quick and easy identification of the item in alarm Full plug and play functionality providing easy intuitive configuration Built in network and sensor test wizards to ensure optimum system operation Other features of the system include; Support for up to 65,000 users per network system. The ability to manage up to 256 i-box units using one network PC providing the ability to control, monitor and manage up to; 512 x i-pal access points. 1,024 x Integrated temperature, humidity, light and consumed voltage sensors. 3,584 x Additional fully configurable sensors. Native Ethernet TCP/IP, UDP 10Mb communications. Local and Wide Area Network (LAN / WAN) support. CCTV integration connecting up to two cameras to one i-box. Simple integration to either cabinet level or room level fire alarm systems. ActiveX Software Development Kit (SDK) for full integration to third party applications. Card management and configuration facility with the ability to generate user cards including photo ID. Multi language support. 88

91 Access Control & Environmental Monitoring i-pal & i-box Systems i-box Part Number And Technical Specification The i-box unit is an ethernet controller that plugs directly into the IP network. The unit is powered by a single IBIPPSU. The IBOX has a single temperature, humidity, light level and incoming voltage sensor built into the unit. Voltage Sensor: Incoming voltage sensor, sampling 10Bit Aspirating Fan: 5.2 cfm Humidity 0-100%, 0.5% Resolution, 3% Accuracy, Light Level Sensor: 0 to 200 Lux Temperature Range -25ºC to 123.8ºC, 25ºC to 40ºC Controller and sensor connections Two IPAL Cabinet Handle, or Standard Access Control Doors via 6 way Mini Din Plug Two IBOXDC, Door Position Sensor, Mini Din through connector An additional 14 external devices and sensors can be plugged into the i-box via 4 way FCC68 connectors One 9 way D Type for addition set firmware I/O, default fire interface plus 9 x Status LEDs Unit Size And Operating Environment Dimensions 212mm wide x 95mm deep x 29mm high Steel Enclosure: Finish Powder Coated Gray TEX36 Universal Fixing Bracket 25 x 25mm Operating Environment -25ºC to 85ºC Voltage: 12VDC (48VDC option) Power: 2.52 Watts Current: 12VDC Communication Protocols Communications Port: RJ45 Ethernet Protocol: TCP/IP, UDP and ARP Card Holder: 4,000 capacity local storage expandable to 32,000 Supporting: LAN/WAN & VPN Standard Memory: 5,000 transaction local storage expandable to 32,000 i-box USER CARDS Cards Fobs Part Number IBOXCARD IBOXFOB IBOXAPL Description Pack of 10 Programmable i-box User Cards Pack of 10 Programmable i-box User Fobs Pack of 10 Programmable i-box User Self Adhesive Labels 89

92 Access Control & Environmental Monitoring i-box Sensor Options Optional i-box Sensors Part Number IBOXTS IBOXDC IBOXLCS IBOXTCS IBOXHTS IBOXLS Description SMART Temperature Sensor With 2.5 meter terminated lead with 4 way FCC68 jack Set high low temperature fresh hold alarm and ambient temp on demand Associate Door Contact for door left open alarm etc Door Contact Read range 15mm from side 10mm from front One Status LED Temperature: -10 to 75c Accuracy 4% Dimensions: 20mm high x 60mm long x 20mm wide Powered by i-box Power: 15ma Door Position Contacts With 2.5 meter terminated lead with mini din through jack. For associated IBOX only. Read range 15mm from side 10mm from front One Status LED Dimensions: 20mm high x 60mm long x 20mm wide Powered by i-box Power: 8ma SMART Location Contacts With 2.5 meter terminated lead with 4 way FCC68 jack. For Side Panel open/closed, and equipment location monitoring Read range 15mm from side 10mm from front One Status LED Dimensions: 20mm high x 60mm long x 20mm wide Powered by i-box Power: 12ma Combined Temperature And Contact Sensor With 2.5 meter terminated lead with 4 way FCC68 jack Set high low temperature fresh hold alarm and ambient temp on demand One Status LED Temperature: -10ºC to 75ºC Accuracy 4% Dimensions: 20mm high x 60mm long x 20mm wide Powered by i-box Power: 12ma SMART Temperature And Humidity Sensor With 2.5 meter terminated lead with 4 way FCC68 jack Set high low temperature fresh hold alarm and ambient temp on demand One Status LED Humidity 0-100%, 0.5% Resolution, 3% Accuracy Temperature: -25ºC to 123.8ºC Resolution 25 to 40ºC Powered from i-box Power: 16ma Smart Light Level Sensor With 2.5 meter terminated lead with 4 way FCC68 jack. Designed for darkened environments, high level light and color responsive sensors available on request One Status LED Light Level Response: 0 To 200 Lux Dimensions: 20mm high x 60mm long x 20mm wide Powered from i-box Power: 15ma 90

93 Access Control & Environmental Monitoring i-box Sensor Options Optional i-box Sensors Part Number IBOXVS IBOXAR IBOXFX IBOXPIRS IBOXSB IBOXSDU IBOXSEC IBOXSMBK Description Smart Intrusion Vibration Vandalism Sensor With 2.5 meter terminated lead with 4 way FCC68 jack One Status LED Vibration fresh hold from SPM Dimensions: 20mm high x 60mm long x 20mm wide Powered by i-box Power: 12ma Auxiliary Relay and Two Digital Inputs With 2.5 meter terminated lead with 4 way FCC68 jack One Status LED Face Plate single gang electrical box size: 85mm square 13mm deep Back Box: 110mm high x 86mm wide x 28mm deep Relay rated: 5amp Digital Inputs: Normally open or closed voltage free contacts Powered by i-box Power: 28ma quiescent 52ma alarm SMART Flood Sensor With 2.5 meter terminated lead with 4 way FCC68 jack, 5 Meters Flood cable, supplied with 15 Fixing clips Two quick blow fuses for electrical safety Flood scale using sensitive wicking cable One Status LED Face Plate single gang electrical box size: 85mm square 13mm deep Back Box: 110mm high x 86mm wide x 28mm deep Voltage: 12v Power: 50ma Intrusion 360 Passive Infra Red Movement Sensor With 2.5 meter terminated lead with 4 way FCC68 jack One Status LED, Multizone PIR Area covered 7M x a mounting height of 2.5M Dimensions: 26mm high x 60mm long x 20mm Wide Powered by i-box Power: 15ma Sounder Beacon Unit With 2.5 meter terminated lead with 4 way FCC68 jack Four Red Flashing High Intensity Miniature bulbs flash at frequency of approximately 3Hz Sound Output: 1M Alarm Frequency KHz Dimensions: 45mm deep x 122mm long x 73mm wide Powered By i-box Power: 200ma i-box Smoke Detector Unit With 2.5 meter terminated lead with 4 way FCC68 jack Combined optical smoke detector with rate of risen and fixed temperature heat One Status LED Temperature: -10ºC to 75ºC Accuracy 4% Smoke response to EN54 Part 7 Heat Response 60ºC Dimensions: 105mm diameter x 60mm deep Powered from i-box Power: 15ma quiescent 30ma in alarm 2.5m Sensor Extension Cable Terminated Lead With 4 way FCC68 with jack and socket Sensor Mounting Bracket Single bracket supplied complete with fixings 91

94 Access Cabinet Components i-box Sensor Options i-box User Cards Part Number IBOXMFTL Description Monitored Fan Tray Lead 2.5 meter terminated lead with 4 way FCC68 jack, connection with two Molynx 3 pin connectors on flying lead for connection to fan tray One Status LED Dimensions: 25 /32 (20mm) high x 2 3 /8 (60mm) long x 25 /32 (20mm) wide Digital Inputs: Normally open or closed dry contacts Powered by i-box Power: 12ma Designed for Microsoft Windows XP i-box User Interface Part Number IBOXSW Description i-box Software Manages 65,000 card holders and access level group with 256 time zones per system Built in alarm reporting, Photo ID, Who's in/out, Configuration/User wizards for true Plug and Play operation CCTV Network Camera Support per Door Software using SQL Standard Query Language Protocol: TCP/IP, UDP and ARP Alarm Handling: SMS, & SNMP Traps version 2.1c SDK option for Integration to 3rd Party Applications, with support for up to 4016 systems Minimum PC specification, Pentium Processor, 64Mb RAM, 64Mb Video Memory for 800 x 600 resolution, 200Mb of free hard disk space 100 BaseT ethernet connection, Mouse, Keyboard Designed for Microsoft Windows XP Access Cabinet i-pal and i-box Options - See pages 83 & 84 for part number and kit information IPAL 1 R A 22 System i-pal i-box System Option 1 = 1 i-pal Handle (Stand Alone Option) 2 = 1 i-pal Handle (Network Option) 3 = 1 i-pal Handle + 1 i-box Unit 4 = 2 i-pal Handles + 1 i-box Unit Supply Configurator R = Retro Fit F = Factory Fit Handle / Trim Color A = Blue B = Black G = Gray Cabinet Unit Height 22 = 22U 27 = 27U 39 = 39U 42 = 42U 47 = 47U 92

95 Access Control & Environmental Monitoring i-pal Sensor Options Each kit comprises the following supplied boxed and labeled; One Color Specific i-pal Handle Ten Self-adhesive cable clips One Bottom Locking Rod (Unit Height Specific) One Program Card One Electronic Lock Rod Extension Two User Cards One Rod Coupling Two User Delete Cards One Cable Duct (Universal Width - Trim To Size) One set of fitting instructions One Universal Power Supply One Glass Door Top Trim Strip - Color Specific (Trim To Size If Required) Customer Retro Fit Kit Part Number Cabinet Height IPAL1R 22 22U IPAL1R 27 27U IPAL1R 39 39U IPAL1R 42 42U IPAL1R 47 47U Factory Fitted Upgrade Part Number Cabinet Height IPAL1F 22 22U IPAL1F 27 27U IPAL1F 39 39U IPAL1F 42 42U IPAL1F 47 47U Color Scheme Options A = Blue B = Black G = Gray This option would be used where the handle will be plugged into an existing i-box installation. Each kit comprises the following supplied boxed and labeled; One Color Specific i-pal Handle Ten Self-adhesive cable clips One Bottom Locking Rod (Unit Height Specific) One Cable Duct (Universal Width - Trim To Size) One Electronic Lock Rod Extension No Power Supply Unit One Rod Coupling One Glass Door Top Trim Strip - Color Specific (Trim To Size If Required) Customer Retro Fit Kit Part Number Cabinet Height IPAL2R 22 22U IPAL2R 27 27U IPAL2R 39 39U IPAL2R 42 42U IPAL2R 47 47U Factory Fitted Upgrade Part Number Cabinet Height IPAL2F 22 22U IPAL2F 27 27U IPAL2F 39 39U IPAL2F 42 42U IPAL2F 47 47U Color Scheme Options A = Blue B = Black G = Gray 93

96 Access Control & Environmental Monitoring i-box Sensor Options Each kit comprises the following supplied boxed and labeled; Two Color Specific i-box Handles Twenty Self-adhesive cable clips Two Bottom Locking Rod (Unit Height Specific) One i-box Unit Two Electronic Lock Rod Extension Ten User Cards Two Rod Coupling One AX Series User Interface Software Two Cable Duct (Universal Width - Trim To Size) One set of fitting instructions One Universal Power Supply Two Glass Door Top Trim Strips - Color Specific (Trim To Size If Required) Customer Retro Fit Kit Part Number Cabinet Height IBOX4R 22 22U IBOX4R 27 27U IBOX4R 39 39U IBOX4R 42 42U IBOX4R 47 47U Factory Fitted Upgrade Part Number Cabinet Height IBOX4F 22 22U IBOX4F 27 27U IBOX4F 39 39U IBOX4F 42 42U IBOX4F 47 47U Color Scheme Options A = Blue B = Black G = Gray Each kit comprises the following supplied boxed and labeled; One Color Specific i-box Handles Ten Self-adhesive cable clips One Bottom Locking Rod (Unit Height Specific) One i-box Unit One Electronic Lock Rod Extension Five User Cards One Rod Coupling One AX Series User Interface Software One Cable Duct (Universal Width - Trim To Size) One set of fitting instructions One Universal Power Supply One Glass Door Top Trim Strips - Color Specific (Trim To Size If Required) Customer Retro Fit Kit Part Number Cabinet Height IBOX3R 22 22U IBOX3R 27 27U IBOX3R 39 39U IBOX3R 42 42U IBOX3R 47 47U Factory Fitted Upgrade Part Number Cabinet Height IBOX3F 22 22U IBOX3F 27 27U IBOX3F 39 39U IBOX3F 42 42U IBOX3F 47 47U Color Scheme Options A = Blue B = Black G = Gray 94

97 Access Control & Environmental Monitoring Integrated Intelligent Power Distribution i-pdu has been developed to seamlessly integrate with Cooper B-Line s i-box and i-pal systems (access control and environmental monitoring system) providing the ability to set-up, manage and control an intelligent power distribution solution using standard IP network addressable technology. Once an i-box has been configured on the network and the i-pdu has been connected the system offers the benefit of real time, bi-directional communications with each i-pdu connected. Importantly this provides not only the ability to accurately monitor and record the power consumption values of each i-pdu but allows the system administrator to control the operation of each and every one of the individual i-pdu sockets. The i-pdu can be configured to perform users configurable outlet start up sequences. This soft start functionality also includes the provision to allow optimized start up using pre set time delays or current draw thresholds. The i-pdu contains a precise measuring device that samples for KWH readings 4,000 times per second, readings are reported at scheduled intervals to the centralized database. Seamless integration to i-box using the same central management software platform (free of charge updates may need to be installed) Twelve Individually fused outlets Ten IEC C13 + Two IEC C19 Maximum current draw rating of 20 Amps Up to 4 i-pdu s connected to one i-box Various power lead termination options including13 Amp, 16 Amp & 32 Amp plugs Features of i-pdu Plug and Play connection Fully configurable sequential start-up Mains filtered Protected and monitored on/off switch Two 20 Character display Individual Socket status: on / off / fuse failure and fault KWH display / Voltage / Current / Firmware and software Standalone configuration function button Technical Specifications & Part Numbers Material: Mild Steel Housing Finish: Painted Black RAL9005 Unit O/A Dimensions: 53 1 /8 (1350mm) High x 3 1 /2 (90mm) Wide x 2 3 /8 (60mm) Deep Unit Weight: 11.4 lbs. (5.2kg) Packaged Size: 61 (1550mm) x 5 7 /8 (150mm) x 5 7 /8 (150mm) (Supplied Individually Boxed) Packaged Weight: 14.0 lbs. (6.35kg) Part Number Description IBOXPDU1612WC1316C 220 / 230v A/C 50 Hz Fitted with 9 ft. (3m) power supply lead Max rating 20Amps terminated with a 16Amp Commando plug Twelve Individually fused outlets Integrated i-box power supply outlet Ten IEC C13 + Two IEC C19 Local PDU status screen Individual outlet status LED Supplied with i-box power supply lead and On / Off Switch sensor port connection lead Compliance WEEE Directive RoHS Compliant CE Approved 95

98 Access Control & Environmental Monitoring Integrated Intelligent Power Distribution The new 1U high i-pdu has been developed, like the existing vertical i-pdu to seamlessly integrate with Cooper B-Line s i-box and i-pal systems (access control and environmental monitoring system) providing the ability to set-up, manage and control an intelligent power distribution solution using standard IP network addressable technology. Once an i-box has been configured on the network and the i-pdu has been connected the system provides real time, bi-directional communications with each i-pdu connected. Importantly this not only provides the ability to accurately monitor and record the power consumption values of each i-pdu but also allows the system administrator to control the operation of each and every one of the individual i-pdu sockets. The i-pdu can be configured to perform users configurable outlet start up sequences. This soft start functionality also includes the provision to allow optimized start up using pre set time delays or current draw thresholds. The i-pdu contains a precise measuring device that samples for KWH readings 4,000 times per second, readings are reported at scheduled intervals to the centralized database. Features of i-pdu Compact 1U 19-inch rack mounted unit Twelve IEC C13 outlets on the rear of the unit Each outlet individually fused Maximum total current draw rating of 20 Amps Up to four i-pdu s can be connected to one i-box Various power lead termination options including13 Amp, 16 Amp & 32 Amp plugs Seamless integration to i-box using the same central management software platform (free of charge updates may need to be installed) Plug and Play connection Fully configurable sequential start-up Mains filtered Protected and monitored on/off switch Integrated i-box power connection LED status lamp Technical Specifications & Part Numbers Material: Mild Steel Housing Finish: Painted Black RAL9005 Unit O/A Dimensions: 1 11 /16 (43mm) H x 19 (483mm) W x 9 7 /8 (250mm) D Unit Weight: 10.1 lbs. (4.6kg) Packaged Size: 4 (100mm) H x 20 5 /8 (525mm) W x 13 3 /4 (350mm) D Packaged Weight: 12.5 lbs. (5.7kg) Part Number Description IBOX1UPDU12WC1316C 220 / 230v A/C 50 Hz Fitted with 3m power supply lead Max rating 20Amps terminated with a 16Amp Commando plug Twelve Individually fused Integrated i-box power supply outlet IEC C13 outlets Supplied with i-box power supply lead and Individual outlet status LED sensor port connection lead On / Off Switch Compliance WEEE Directive RoHS Compliant CE Approved Details Upon Request 96

99 Access Control & Environmental Monitoring I-BOX Shelf Unit Part Number IBOXSHELF Description i-box 19-Inch Front Mounted Sliding Shelf 1U high x 12 3 /8 (315mm) deep sliding cantilever shelf finished in Black RAL Designed to house a single i-box the shelf has integrated cable management to ensure connections remain stress free during operation and maintenance The shelf assembly is rated at 33 lbs. (15kg) load capacity 97

100 Technical Specification Designed for loads up to 2,200 lbs when supported equally on the vertical panel mounts and using either the skid, castor or jacking foot options. The Access range has a top and bottom tubular frame, which is clad with sheet steel fascias and connected by two vertical aluminum extrusions. (UK and World - wide Patents) Framework Material Tube Frames 1 (25mm) x 1 (25mm) x 1 (25mm) wall thickness corner welded steel tube. Fascias 18 Gauge (1.2mm) Steel CR4 Zinc Coated Center Vertical Uprights Aluminum extrusion. Corner Trims Nylon 66 Glass Toughened BS gray tint - exposed edges polished, bonded edges. Cladding Panels Material Side Panels 18 Gauge (1.2mm) Steel CR4 Rear Door 16 Gauge (1.5mm) Steel CR4 Front Door Styles 16 Gauge (1.5mm) Steel CR4 Top Panels 18 Gauge (1.2mm) Steel CR4 Hinge Mouldings Nylon inch/ETSI Panel Mounts and 800/600 reducers. Conforming to IEC 297 or ETSI Part 3 standards with mounting facilities for universal front fixing and Cooper B-Line side mounting accessories. Cross 800/600 reduction rails Vertical panel mounts 19-inch Vertical panel mounts ETSI Material 14 Gauge (2.0mm) Steel CR4 14 Gauge (2.0mm) Steel CR4 14 Gauge (2.0mm) Steel CR4 Castor Plate/Plinth Plate Corner Plates 11 Gauge (3.0mm) Steel CR4 Kick Plate Trim 18 Gauge (1.2mm) Steel CR4 Castor 550 lbs. (250kg) per castor rated loading Jacking Foot 4400 lbs. (2000kg) static load Skid Nylon 66 Fixing Screws Main fixings M6 Socket set screws - Tensile Strength 10.9 All other fixings M6 screws - Tensile Strength

101 Technical Specification IP Rating IEC529 IP20 Earthing / Earthing Kit Compliant to EN60950 Clause Earthing Specification The resistance of the connection between earthing terminal or earthing contact and parts required to be earthed shall not exceed 0.1 ohms. The test current shall be 1.5 times the current capacity of any hazardous voltage circuit at the point where failure of basic insulation would make the earth point live. The test voltage shall not exceed 12V and the test current may not be more than 25 A. Locking System Each door has a central, pull out and 90 turn locking handle with two point espan locking. Doors are hinged LH as standard but can be supplied or converted to RH hinged Handle and espan guides - Nylon 66, Locking rods 8mm MS Bar Accessories Specific to Access Top fan trays, Plinth/Castor/Jacking foot kits, Cable mounting accessories. Universal - All depth fitting accessories using the Cooper B-Line panel mount side fixings are compatible with the Access rack. All front mounting accessories using the front 19-inch mountings are compatible. Components Corner Mouldings, Door Hinge Mouldings & Door Lock assembly Vertical Extrusions Structured Epoxy Polyester Powder DFT 50 Microns Top Frames, Top Panels, Side Panels and Doors Internal Frame, 19-Inch Rails & Adaptor Channel Std. Color Finish RAL 9005 Black (VDI 22 texture) - Default NCS R90B Blue (VDI 22 texture) RAL 9005 Black - Default NCS R90B Blue RAL 9005 Black NCS 1502Y Light Gray Structured Epoxy Polyester Powder DFT 50 Microns Painted standard silver Epoxy Polyester Powder DFT 50 Microns Hardware & Lock Rods Zinc & Trivalent Passivate BS EN 12329:

102 Technical Specification UL Listing NWIN.E Information Technology and Communications Equipment Cabinet, Enclosure and Rack Systems Information Technology and Communications Equipment Cabinet, Enclosure and Rack Systems. See General Information for Information Technology and Communications Equipment Cabinet, Enclosure and Rack Systems COOPER B-LINE INC 509 W MONROE ST HIGHLAND, IL USA Safety of Information Technology Equipment - UL Scope Equipment covered by this standard This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V and designed to be installed in accordance with the Canadian Electrical Code, Part I, CSA C22.1; CSA C22.2 No. 0; and the National Electrical Code, NFPA 70. The standard is also applicable to equipment, unless otherwise identified by a marking or instructions, designed to be installed in accordance with Article 645 of the National Electrical Code, NFPA 70, and the Standard for the Protection of Electronic Computer Data-Processing Equipment, NFPA 75. This standard is also applicable to such information technology equipment designed and intended to be connected directly to a TELECOMMUNICATION NETWORK, regardless of the source of power. It is also applicable to such information technology equipment designed to use the AC MAINS SUPPLY as a telecommunication transmission medium (see note 4 of clause 6). This standard specifies requirements are intended to reduce risks of fire, electric shock or injury for the OPERATOR and layman who may come into contact with the equipment and, where specifically stated, for SERVICE PERSONNEL. This standard is intended to reduce such risks with respect to installed equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner prescribed by the manufacturer. Safety of Information Technology Equipment - UL Cont. This list is not intended to be comprehensive, and equipment that is not listed is not necessarily excluded from the scope. Equipment complying with the relevant requirements in this standard are considered suitable for use with process control equipment, automatic test equipment and similar systems requiring information processing facilities. However, this standard does not include requirements for performance or functional characteristics of equipment Additional requirements Requirements additional to those specified in this standard may be necessary for: Equipment intended for operation in special environments, for example, extremes of temperature; excessive dust, moisture or vibration; flammable gases; and corrosive or explosive atmospheres Electromedical applications with physical connections to the patient Equipment intended to be used in vehicles, on board ships or aircraft, in tropical countries, or at altitudes greater than m Equipment intended for use where ingress of water is possible; for guidance on such requirements and on relevant testing see annex t. NOTE - Attention is drawn to the fact that authorities of some countries impose additional requirements Exclusions This standard does not apply to: Support equipment, such as air conditioning, fire detection or fire extinguishing systems Power supply systems, such as motor-generator sets, battery backup systems and transformers, which are not an integral part of the equipment Building installation wiring Devices requiring no electrical power 100

103 Technical Specification Access Cabinet System. Load Test Reference _A4788 Product Part Number: A4288C Product Description: Access Cabinet - 42U x 31.5 (800mm) wide x 35 (875mm) deep Test Date: 8th February 2008 Test Agency: Speedy Lifting Gear Hire Avon Trading Estate St Philips Bristol BS2 0XA Supervised By: Mr C M Wright Engineering Manager Cooper B-Line Ltd Test Procedure: The 42U Access rack was fitted with 12 full depth shelves; each shelf was loaded with five (5) 44 lb. (20kg) test weights. Total weight 2425 lbs. (1100kg). Acceptance: The enclosure is to be loaded evenly with a weight to simulate a fully loaded enclosure. The unit must support 2200 lbs. (1000kg) static load. Results: The Access cabinet was loaded with the full range of test weights available providing a static load of 2425 lbs. (1100kg). 340 lbs. (750kg) No deformation lbs. (1000kg) Slight deformation (2mm) to the ends of the (AA8) cross rail lbs. (1000kg) No further deformation. 101

104 Access Configurator Probably the best FREE tool you will ever use The Access Configurator software has been developed to provide a unique method of assisting with the design, configuration and layout of the Access Cabinet Range. It allows the user to construct a cabinet to their own specification by using a building block approach to select cabinet components from the many options available. Once the user has built their virtual rack, they are able to visualize the design by using a fully interactive 3D model. A snapshot of the model can then be saved as an image file for use with reports or for later reference. Cabinet configuration Cabinet layout Visualization of final cabinet build Quotations Allows for tailored cabinet build to specification Equipment and accessories can be shown in position Final cabinet image can be viewed on screen Image can be saved to file View orientation can be modified The software includes a library of standard accessories that can be placed into a rack layout screen, which provides a useful equipment U position layout guide. This layout can then be displayed in the 3D model giving an excellent visualization of a populated rack. As well as providing a detailed breakdown of each component used, the software also builds up a convenient master part number with a full description of all items used. This information can then be read by the report generator to provide a detailed quote or customer enquiry complete with images previously generated in the configuration screen. Once a configuration is finished it can be easily stored and retrieved as a project file. There is also a useful contact database for storing client information. Once the selection is made, the final results are displayed in the interactive 3D model shown opposite. A preferred snapshot of the resulting picture can then be saved as an image file. Order Ref: CBLC 102